A disk-only snapshot was taken without any space check, though its
overlays grow as the guest writes and a later delete merges them down;
a full pool pauses the guest and can leave the snapshot undeletable.
Only a memory snapshot was checked, for the memory alone.
Before a snapshot, each storage pool with a disk of the VM must have
free a share of those disks' virtual size (10%, at least 1 GiB), and
the pool of the memory file the VM's memory on top. Both values are on
the Settings page (Snapshot Free Percent, Snapshot Free Min GiB; 0
turns a rule off, an invalid value keeps the default). The pools are
refreshed first, and a failed refresh or an unreadable volume refuses
the snapshot instead of skipping the check; a disk in no pool is not
checked. Nothing is reserved: later writes can still fill a pool.
A disk-only snapshot of a running VM is crash-consistent: data the
guest has not written yet is missing from it. With a connected QEMU
guest agent, the snapshot form now offers to freeze the guest's file
systems while the disks are snapshotted (libvirt's QUIESCE flag); the
box is checked by default and can be cleared. It is offered only for a
running VM whose agent is connected, and not together with memory:
libvirt accepts quiesce only for disk-only snapshots, and a memory
snapshot keeps the whole guest state anyway. A request that does not
fit is refused before libvirt is called.
After a snapshot revert or delete, files libvirt could not remove are
named in a warning that says nothing uses them and asks to remove them
by hand. A file another VM on the same host uses (as a disk, a backing
file or a snapshot file) is no longer named: removing it would break
that VM. The warning now says no VM on this host uses the files.
libvirt deletes any volume it is asked to. The storage page and the API
deleted a VM's disk, the base image of another volume or the file a
snapshot was taken on without a check, breaking the VM or its
snapshots.
wvmStorage.del_volume now refuses a volume a domain on the compute uses
as a disk or a backing file of one, a file of a domain's snapshots, or
the backing file of another volume. The check is the one destroy
already used, moved to wvmConnect and extended to snapshot files, so
destroy also keeps the files of another VM's snapshots. The storage
page shows the refusal; the API answers 400 with it, as for other
refusals. Deleting a disk from a VM refuses after the detach when the
VM's own snapshots need the volume, and says the volume was kept.
Network disks count by their source name, pool volume disks by their
volume's path. A volume whose metadata cannot be read stops the check
instead of counting as unused; only one removed meanwhile is skipped.
The check and the delete hold the compute lock, so no VM operation
attaches the volume in between; a busy compute is a message on the page
and 409 in the API.
When libvirt cannot remove a snapshot file it merged or discarded, it
only logs a warning and the delete or revert still succeeds. On NFS it
removes them as the qemu user, so an image directory the qemu user may
not write to left every merged overlay on disk without a word.
Revert and delete now compare the files in use before and after and
show a warning naming the ones still on disk. Only a snapshot's own
files (overlays, memory) and overlays on a snapshot point count, and a
disk the revert detached is never named, so a kept disk is not offered
for removal.
Create, revert and delete are one libvirt call each. The pflash-to-rom
loader rewrite, the hand-written block commit and the s1./s2. names are
gone, so UEFI VMs can take external snapshots, a revert keeps disks added
later, and deleting an older snapshot keeps the newer one.
Create refuses what libvirt could not revert or delete later: internal
snapshots on the VM, a saved state, a running snapshot job, disks that
are not files, CD-ROM media, a branch after a revert, and memory without
a running VM or room in the first disk's pool. A disk-only revert keeps
the VM running, paused or shut off; one with memory resumes it as saved.
A revert in the same second as the previous one, which libvirt fails
after stopping the VM, is retried once.
A snapshot the old code took of a UEFI VM saved the loader as rom; its
revert is refused (deleting it still works).
The snapshots tab lists internal and external snapshots separately, can
save memory too, shows running snapshot jobs, and the revert confirmation
names the disks it detaches and that NVRAM is not restored.
The device name of a new disk or CD-ROM was chosen from the running VM
only. A name used only in the persistent definition, such as a disk
renamed by a pending bus change, could be chosen again: the disk was
attached to the running VM, the persistent attach was refused, and the
disk was gone after the next start. Names either definition uses are now
taken.
On an active VM the boot order editor, the video model select and the
console form showed the running VM: a pending boot order, video model or
console setting looked unset, and the boot order editor offered devices
of the running VM only. Choosing one of those cleared the pending order,
since the setter dropped the old order and skipped devices it could not
find. They now read the persistent definition (get_bootmenu,
get_bootorder, get_media_devices, get_video_model and the console
getters take config=), and set_bootorder refuses a device that is not in
it before it changes anything.
On a running VM a disk edit changes the definition for the next start,
but the disk list and its edit form showed the running VM's disks. The
form posts every field, so an edit wrote the running values back over
earlier pending changes (cache, io, serial, ...), and a disk only in the
next definition could not be edited. The list now shows the persistent
disks. A volume is deleted only when both definitions use it at that
device, since the list may now show another source than the running VM.
Only a running VM counted as active, so a paused one (or one blocked,
PM-suspended or shutting down) had its maximum and current memory written
for the next boot and nothing applied live. Every active VM now has its
current memory changed live and in its definition and keeps its maximum;
a paused guest takes the new size once resumed. The quota check follows
the same rule. Checked on a real guest: paused, shrunk, resumed, then
grown back.
The .vv console file is built from the VM found by its UUID, with the
console page's getters, instead of looking the VM up by name five times;
a console without a listen address or password now gives 127.0.0.1 and
an empty password instead of "None". Removed methods nothing calls: the
by-name getters and power methods of wvmInstances, managed save, the vCPU
mode getter (it read the wrong attribute), the old NIC editor and its
bridge lookup. CD-ROM media and NIC hotplug use _definitions() like the
other device edits, the disk editor takes the bus prefix from
util.vol_dev_type, and an unreadable disk is logged, not printed.
A volume of an LVM or iSCSI pool can be attached: by its own path, with
the format its volume reports (raw when the pool knows none). Detaching
a disk takes each definition's own description of it, so a disk only in
the persistent definition goes too. Every NIC type can be a boot device;
bridge and direct NICs were dropped from the boot order. The video model
is a value, never parsed as XML. QoS changes clear the page's read cache.
The NIC model "default" leaves the choice to libvirt instead of writing
model "default", and rt18139 is rtl8139: a VM with either did not start
(checked on a RHEL 10 host). A migration corrects the default NIC type
setting.
Each stats answer carries a signed sample of the counters, bound to the VM,
its compute and UUID. The next poll sends it back and the rates are the
averages since then; a sample from another run of the VM (domain ID),
another host CPU count or device list, or older than 30 s falls back to
one second as before. Windows are measured on the monotonic clock.
Now that a poll is cheap, the Stats tab polls every 5 s like the host
graph, the first time as soon as it opens (pollWhileVisible takes the
delay of the first request).
A counter the host reports as unsupported (-1) or that went back gives no
value instead of 0 or a jump; a NIC without a target keeps its chart, a
pool volume disk is measured, and a disk or NIC attached after the page
loaded no longer stops the other charts. Disk rates are MB/s (they were
MiB/s labelled Mb/s), network Mbit/s; the CPU tooltip names the window.
Measured on a VM with two disks, a CD-ROM and a NIC: 70 libvirt calls per
page, now 43. Within the page's cached_reads block the VM's state, the
host's info and domain capabilities, and each disk path's volume are read
once; the running and the persistent disk lists share a path's volume.
The ISO list takes the active pools in one call instead of looking each up
by name; it still refreshes them, so an image copied in by hand shows up.
The opt-in DRBD status waits at most 10 s for the compute's ssh, then
leaves the status unknown instead of holding the page.
A clone copies the disks of the VM's persistent definition, but its disk
quota and the disk names chosen with automatic naming came from the
running VM's disks, which differ after a disk is attached or detached on
the running VM only.
Without instances.snapshot_instances (snapshots) or is_vnc (console
settings) the request was accepted and silently did nothing, although
the documented answer for a missing right is 403. delete_external_snapshot
also asked libvirt for the VM state before checking the permission.
Power cycle force-stopped and started a template, which power on refuses.
A non-staff owner with is_delete could delete a template that the
template rule otherwise leaves to superusers and staff owners;
get_instance(perm_type="delete") now refuses it, and the page offers
Destroy by the same rule.
A VM operation (or destroy and clone, which hold the whole compute) waits
for its compute's lock while a migration holds it. When the migration
moved the VM's record to the destination, the waiting operation went on
there holding only the source compute's lock, unordered with a
reconciliation, migration or disk attach on the destination. After taking
the locks it now checks the VM is still on the locked compute and
otherwise answers busy, so the retry locks the right one. Clone also
checks again under the lock whether the user may clone the VM, and
checks the quota and the clone's settings against the VM as it is then:
its template mark, size or the user's rights may have changed meanwhile.
gstfsd mounted every partition it listed: a root on LVM was never found,
a disk with two OS roots got the change twice and two concatenated
replies, and no root, an error or a request longer than 1024 bytes ended
the connection without a reply. It now lets libguestfs inspect the guest,
mounts its one OS the way the guest does (a broken filesystem off the
changed path is left out), and sends exactly one reply, keeping the first
error. The root entry is found on any line of /etc/shadow and must be
unique; a key needs no shadow file. A request is at most 64 KiB. Each
change runs in a worker process with a directly started appliance; both
are killed when the request is not done 100 s after gstfsd accepted it
(GSTFSD_DEADLINE may only lower that), before the panel's 120 s timeout
releases the VM, or when the panel's connection ends, and the reply waits
until they are gone, so nothing touches the disk once the panel has given
up. A worker that dies says why. The panel
connects over IPv4 or IPv6, sends the whole request and reads the reply
until gstfsd closes.
The documented rule held only for snapshots: an owner with is_change could
still resize a template, set its root password and SSH keys, change its
options and console settings. get_instance(perm_type="change") now
refuses a template to owners who are not staff, which covers every change
view and the API; the per-view snapshot checks it replaces are removed,
and the page offers those controls by the same rule. Viewing, the console,
power (a no-op on a template) and cloning are unchanged.
The page showed controls the backend then refused: power to global
viewers, the console, virt-viewer and VDI controls and the root password
and SSH key forms to viewers, resize to staff, per-vCPU hotplug, video
model and guest agent to non-superusers, clone and options by the clone
permission alone, snapshots without change permission. The page now asks
the views' own rules (owner, is_change, clone and snapshot permissions,
the template rules). OS info, opened from the header, is there for every
viewer; the XML editor and tab restoring after a redirect no longer throw
when a pane is absent; Settings opens on the first section the user has.
The authorization matrix also covers a template VM, the template clone
rule and the template snapshot rule.
Several instance mutation views crashed with a bare HTTP 500 when a form field
the UI always sends was absent or malformed (a direct or crafted request);
ExceptionMiddleware turns only libvirt and timeout errors into 4xx, so these
reached a 500. Fixed:
- add_network parsed a None network source ("'NoneType' has no attribute
'split'"); it now requires a selected network.
- set_qos read an unbound local 'mac' when no field name contained "mac", and
passed an invalid direction or non-numeric rate to the proxy (ValueError); it
now requires a MAC, an inbound/outbound direction and whole-number rates.
- unset_qos passed an empty direction into the proxy's XPath (XPathEvalError);
it now requires a MAC and a valid direction.
- resizevm_cpu and resize_memory ran int() over an empty or non-numeric value;
they now validate with int() (not str.isdigit(), which accepts "²" that
int() rejects).
- add_public_key passed a missing/non-numeric sshkeyid into an integer-id
lookup (ValueError); it now requires a numeric id.
Each reports the problem and returns to the VM page without calling libvirt or
logging, as change_network already does.
Tests: each view with a field missing, non-numeric or a unicode digit returns
302 with an error message, writes no log, and does not attempt the mutation.
The tests fail on the previous code.
A compute's hostname and login go unquoted into the libvirt connection URI
(qemu+ssh://login@host/system, qemu+tcp://host/system, qemu+tls://...) and,
for an SSH compute, into the ssh command line of the DRBD status view. They
were barely validated: validate_hostname used re.match with a negated class,
so it caught only a leading special character, and login was never checked.
A hostname like "192.0.2.1/system?command=/path" injected a libvirt URI
parameter (verified: connecting ran the named command through the ssh
wrapper), and TLS/SSH parameters such as no_verify, pkipath, socket or
netcat could be added the same way; a login like "-oProxyCommand=..." became
an ssh option. The DRF ComputeSerializer applied neither check, and
validate_name tested a string literal instead of its argument, so it never
raised.
validate_hostname now accepts only an IPv4 address or a host name with
fullmatch (no scheme, port, path, query, whitespace or IPv6 literal; IPv6 is
left out until the URI building brackets it). validate_login accepts an empty
value (TCP falls back to the server's authentication, the socket transport
ignores the login) or a plain name with no leading "-". Both sit on the
Compute model fields, so the forms and the DRF serializer (which copies model
validators onto its fields) reject the values; a migration records the
metadata. validate_name checks its argument. drbd_status validates the login
and hostname before building login@host and ends ssh option parsing with
"--"; an existing or bypassed bad row is skipped rather than run.
Tests: hostname/login validators accept real values and reject URI and
option injection; the SSH form and the serializer (create, and an empty TCP
login) enforce them; drbd_status skips an injecting target. Checked the real
test computes still validate. The new tests fail on the previous code.
With "VM Clone Auto Migrate" on, a new clone was migrated to a random
compute, whatever storage, CPU or network that host had, and a failed
migration showed as a failed clone although the clone existed.
The setting and its code are removed; migration appsettings.0015
deletes the setting. A clone can be migrated afterwards like any VM.
The README's update notes list the migration changes: the migration
address, storage pools for the disk check, and this setting.
moveto read the VM state for each flag and dropped options that did
not fit it, so a request could run as something else than asked; the
log then named the mode from the form ("live" or "offline"), not the
one used. The API did not log at all and answered "instance migrate is
started" after the migration had finished.
- moveto reads the state once. A running VM migrates live, or without
live paused for the transfer (non-live); a paused VM stays paused; a
shut-off VM moves offline. Live for a shut-off VM, offline for a
running or paused one, and any other state are refused before
anything changes. unsafe, auto converge (live only) and compressed
apply to a running VM.
- migrate_instance logs the outcome for the VM page and the API: the
mode and options used, or the error. The API answers
"instance is migrated (<mode>)" and accepts requests that leave out
an optional option.
- Post copy is gone from the form, the view and the API: only the
flag was set, and without migrateStartPostCopy, which the app never
called, the migration never switched to post copy.
Migration is client-driven: libvirt sends the VM's memory to the
destination's own host name unless a migration URI is given, and the
app never gave one. Where the hosts cannot resolve each other's names
(or the names point at a management network) every migration failed
with "Unable to resolve address '<host name>' service '49152'".
A compute now has an optional migration address (an IP address or a
host name, no scheme or port), editable in the compute form and the
API. A VM migrating to that compute is sent to tcp://<address>
(bracketed for IPv6). Empty, the default for existing computes, keeps
the previous behavior. The compute's host name is not reused, because
for SSH computes it can be an ssh_config alias.
The migration log entry names the address when one is set.
Migration left the VM defined on the source host unless "Delete
original" was ticked (VIR_MIGRATE_UNDEFINE_SOURCE). With the shared
storage migration needs, that definition points at the disks the
destination VM is running on: the VM showed on both hosts and could be
started (or autostarted) a second time against the same disks; only a
configured lock manager stops that.
moveto now always passes VIR_MIGRATE_UNDEFINE_SOURCE with
VIR_MIGRATE_PERSIST_DEST. The option is gone from the form, the view,
the API (MigrateSerializer.xml_del) and the clone auto-migration. It
removes the definition, not the disk files.
When a VM action failed because its host could not be reached (the
connection could not be opened, or it dropped during the call), the
error page showed libvirt's connection error to any user: it names the
host and how it is reached, e.g. "ssh: connect to host 10.x port 22".
The lists and the VM page already keep that to administrators.
- Opening a connection now fails with ConnectionFailed (a subclass of
OperationError). A dropped connection is recognized by its error
domain and code (RPC/remote/SSH layer with a transport code, measured:
a keepalive timeout is VIR_FROM_RPC/VIR_ERR_INTERNAL_ERROR); an
operation the daemon does not support (VIR_ERR_NO_SUPPORT) is not
treated as one.
- ExceptionMiddleware (pages and API) and the views that report the
error themselves (snapshot, revert, disk deletion, clone) show it to
superusers and view_instances users, and to everyone else "The host
of this virtual machine cannot be reached right now." Errors of the
operation itself ("domain is not running") are shown as before.
Checked on the test setup: powering on a VM of an unreachable compute
shows the owner the generic text and the administrator the error. The
tests fail on the previous code.
Templates do not count towards a user's quota and cannot be started.
Staff owners may mark and unmark their VMs as templates, so a staff
user could mark a VM as a template, use the freed quota elsewhere, and
unmark it again: the VM came back without any check, over the quota.
For users with a quota (everyone but superusers), turning a template
back into a VM now passes check_user_quota with the VM's size (one VM,
its vCPUs, memory and disks). If the quota is reached or cannot be
verified, it stays a template and the user is told why. Marking a VM as
a template frees quota and is not checked. The view takes the
per-user quota lock like the other quota-checked changes.
The existing template-flag test gives its mocked VM a size. The new
tests fail on the previous code.
The VM page's getters read the domain XML on their own: one load made
86 libvirt calls for a real VM, 29 of them for the same three XML
documents (live, live with secrets, persistent) and 6 for the host
capabilities. Each call is a round trip to the host.
wvmInstance.cached_reads() is a block in which _XMLDesc (per flags
value) and get_cap_xml are read from libvirt once; it ends with the
block, even on an error, does not nest, and _defineXML drops it.
Outside a block every read goes to libvirt as before. Only the VM page
view, which does not change the VM, uses it, around its rendering.
Views that change the VM keep reading fresh XML: most changes (devices,
QoS, memory) do not go through _defineXML, and several views read,
change and define more than once in one request.
Measured on the test host: 86 -> 55 calls (XMLDesc 29 -> 3,
getCapabilities 6 -> 1) for one VM, 82 -> 54 for another; the page took
0.23-0.25 s before, 0.14-0.15 s after. The HTML of both pages is
identical before and after (CSRF tokens aside). A test renders the page
on libvirt's test driver through the real getters: 25 XML reads before,
one per kind now.
Each open VM page asks for its statistics every 10 seconds. For a
running VM the stats view measured the CPU, then each disk, then each
NIC, sleeping one second for each. With two disks and a NIC a request
held a sync gunicorn worker for over 4 s, so a few dozen open VM pages
could keep every worker busy.
wvmInstance.usage() replaces cpu_usage, disk_usage and net_usage, the
stats view's only callers: it reads all counters, sleeps one second
once and reads them again. Values and units are unchanged (CPU percent
of the host, disk bytes, network bits per second); compared against the
previous methods on the same counters, the results are identical.
Measured on the test host for a running VM with two disks and a NIC:
the stats request took 4.1-4.3 s before, 1.1-1.3 s now. The new test
fails on the previous code.
A VM owner who may manage the console (is_change and is_vnc) could set
its listen address to all interfaces and remove its password: a VNC
console reachable from the network without a password. Checked on a
test host: the owner's form changed the VM's listen address to 0.0.0.0
and then removed the password.
- The listen address field is disabled for users who are not
superusers; a disabled field ignores posted values. They can still
set or change the password and the keymap.
- A console whose persistent definition does not bind it to loopback
(or a Unix socket) only loses its password through an administrator.
A binding the XML does not pin down counts as not local: listen type
network, or no address (the host's default in qemu.conf).
On the test host, the owner's form now leaves the listen address alone
and is refused when it removes the password of a console listening on
0.0.0.0; with the console on localhost the password can be removed.
The new tests fail on the previous code.
The VM page reads the VM from libvirt throughout. When its host could
not be reached, the connection error replaced the page with the error
page and showed libvirt's message, which names the host and how it is
reached, to any user who may view the VM.
The page now checks Compute.status first. If the host is not connected,
it goes to the instance list with a message: administrators (superuser
or view_instances) get the host and the error, other users only that
the VM's host cannot be reached right now. The list shows the VM as
unknown.
This covers the page itself; actions on the VM still report libvirt's
error if the host drops. The detail page tests now mock a connected
host.
Checked against the test hosts: a real VM's page opens as before, a VM
on an unreachable compute leads to the list with the user's or the
administrator's message. The new tests fail on the previous code.
check_user_quota added up the vCPUs, memory and disks of the user's
VMs, but skipped a VM whose host failed a TCP probe. A host that was
down therefore let users exceed their quota, and the probe always failed
for ssh computes named by an ssh_config alias or reached through
ProxyJump, so their VMs were never counted. A VM that could not be read
turned the page into the error page instead.
- Hosts are checked with Compute.status, the connection WebVirtCloud
uses, once per host. A VM that cannot be read (host down, VM gone)
makes the usage unknown: clone and resize up are refused with their
own message (fail closed).
- A request that adds nothing is not checked, so a user over quota can
still shrink a VM. Users without limits, and an exceeded instance
count (from the database), need no host either.
- Memory resize of a running VM changes only the current memory, but
the quota was charged with the submitted maximum. It is now charged
with no change, and resize_mem gets the current maximum, so a VM that
shuts down meanwhile cannot take an unchecked one.
- The VM page no longer computes the quota on every load (it read every
VM of the user on every host for a "quota reached" banner). The limit
is reported when a change is refused.
The test that expected a down host to pass the quota now expects it to
be refused. Checked against the test hosts: with a VM behind an
ssh_config alias the previous code counted 29 vCPUs, the new one 31;
with a VM on an unreachable host the previous code allowed +1 vCPU,
the new one refuses it after 5.1 s and allows -1 at once. The new
tests fail on the previous code, except the ones guarding unchanged
behaviour.
The instance list showed every user an alert for each compute that was
not connected, with the compute's name and libvirt's error text. That
text names the host and how it is reached (for example "ssh: connect
to host 10.20.30.132 port 22: No route to host"), while the list hides
host names from users who are not administrators.
- Superusers and users with the global view_instances permission see
each unreachable host and its error, as before.
- Other users see one alert without host details, and only when a host
of their own VMs is down. It explains why those VMs show as unknown.
- The alerts' close button works (data-bs-dismiss was "modal").
Checked against the test setup with an unreachable compute that holds a
user's VM: the user sees the VM as unknown and the alert, but no host
name, address or error text; a superuser still sees them. The tests for
the user fail on the previous code.
An optional dhcpd.conf next to the application supplies clone names and
their MAC addresses. get_dhcp_mac_address read it from BASE_DIR, but
guess_clone_name from a fixed /srv/webvirtcloud/dhcpd.conf, so on any
other install path the Guess button found no name while the MAC lookup
still worked. Both use utils.dhcpd_conf() (BASE_DIR) now.
The editor shows its Change button only for a shut-off VM, but
change_xml did not check the state: a page loaded while the VM was off
could still be saved after it was started, and the posted XML then
overwrote every change made to the definition in between. The view now
refuses unless the VM is shut off, with a message.
Creating each option on a RHEL qemu-kvm host showed:
- CD-ROM: the create page offered every disk bus, but the empty CD-ROM
of a new VM works only on ide, sata and scsi. fdc and virtio failed
("Invalid bus type", "does not support ejectable media"), usb failed
with a device named 'Nonea' because vol_dev_type() had no prefix for
usb, and after that libvirt refuses an empty usb disk. Only ide, sata
and scsi are offered now, and another value is refused before any
storage is allocated. vol_dev_type() names usb disks sdX, which also
fixes data volumes on the usb bus.
- USB controller: any input device added a bare <controller
type='usb'/>, which libvirt turns into piix3-uhci (USB 1.1) on q35
instead of its default qemu-xhci. The bare controller is gone; libvirt
adds the machine's default for USB inputs.
- MACs: with more networks than MAC addresses, create_instance indexed
past the list and the request failed with a 500. NICs without a given
MAC now get one from libvirt. MAC addresses are validated (format, not
more than networks) by the page and the API before anything is
created; they went into the XML unchecked.
Unit tests cover the refused values, the MAC rule and the usb prefix.
Live tests create a VM with every offered CD-ROM bus and start it,
check the USB controller with a USB input device and create a VM with
two networks and one MAC.
create_instance set secure='yes' (and with it SMM) only while switching
a non-q35 machine to q35. With q35 already chosen, a secure boot loader
was defined with secure='no' and without SMM. Secure boot is now
requested whenever the loader is a secure boot build; the switch to q35
is unchanged.
libvirt 11 on RHEL fills in secure='yes' and SMM from the firmware
descriptor of a known loader, so there the domain was already correct;
without such a descriptor (older libvirt, custom loader) it was not.
A unit test checks what WebVirtCloud requests (fails on the previous
code); a live test creates a q35 VM with the host's secure boot loader
and starts it.
create_instance passed the loader list where find_uefi_path_for_arch
expects the machine type. The domain capabilities were then read for
the default machine (pc) instead of the chosen one: on a RHEL host a q35
VM was offered /usr/share/OVMF/OVMF_CODE.secboot.fd, which q35 does not
list, instead of /usr/share/edk2/ovmf/OVMF_CODE.fd. The machine type is
passed now.
The page also read dom_caps["loader_enums"] into an unused variable;
on a host without loader support the key is missing and the page failed
with a KeyError. The line is removed.
A unit test covers the call and the host without loader support (it
fails on the previous code). A live test creates a q35 VM with the
offered UEFI firmware, checks that libvirt lists that loader for q35 and
starts the VM; it fails on the previous code.
Web views:
- 34 views returned to request.META["HTTP_REFERER"] + "#tab": without
a Referer they failed with a TypeError (500), and a Referer from
another site was followed (open redirect). They return through
_back(), which keeps a same-site Referer and otherwise opens the VM
page at the tab. get_safe_redirect uses the same check. Rejected disk
options also return to the VM's disks tab instead of the VM list.
- migrate_instance returned silently when the target was the current
compute or unreachable, so the web view logged "Instance is migrated"
and the API answered "instance migrate is started". It now raises;
the view reports the error and logs only a completed migration, and
an unknown compute id is a 404 instead of a 500. The automatic
migration after a clone skips a target that is the current compute.
- add_owner and del_owner failed with a 500 without their ids, add_owner
also when the user was already an owner, and del_owner deleted the
given ownership record even when it belonged to another VM. Ids are
validated, a record of another VM is a 404, and a repeated owner is
reported.
- Broad handlers that hid programming errors are narrowed: clone catches
libvirt, value and OS errors (a lock timeout included), ownership
lookups catch DoesNotExist. The DRBD status no longer needs its bare
except: the VM name is escaped in the regex, which was the only thing
that could fail there.
API:
- A libvirt error under /api/ is JSON with status 400, and a lock
timeout 409, instead of the HTML error page. This lives in the
existing ExceptionMiddleware, so existing settings need no change.
- Volume create/delete on an inactive pool answer 409, and invalid
volume data 400 with the serializer errors, instead of 200.
The new tests cover every view that returns with _back() without a
Referer and with a foreign one, the migrate failures on web and API,
the owner ids, the API error format and the volume statuses; nine of
the ten fail on the previous code.
