The create page and the API's create take the architecture from the
URL. One the host's capabilities do not list raised a KeyError in
get_dom_cap_xml: an HTML 500 for both. It is now "This host has no
architecture noarch": the page shows it, the API answers 400.
Each was checked with git grep across every tracked file (templates, JS,
shell, unit files and the extensionless console daemons) and for
dynamic use (URL names, template names, registries):
- vrtManager: host_is_up, is_kvm_supported, get_emulators,
get_file_extensions, both get_network_forward, get_snapshots,
get_storages_images, get_os_type, get_host_arch, the get_pretty_* trio
and, in util, is_kvm_available, randomMAC, get_max_vcpus, compareMAC,
pretty_mem, pretty_bytes and validate_uuid; with them the port
constants only host_is_up read. Some were reached only by their tests,
which go too.
- The flavor edit page: nothing linked to it; flavors are created and
deleted on the Flavors page and edited through the API.
- computes.validate_name, UserForm.identity_has_errors, the has_perm
template tag, the ALLOW_EMPTY_PASSWORD setting nothing reads,
hidePleaseWaitDialog, default_app_config (ignored since Django 4.1)
and the Python < 3.6 lines of secret_generator.py.
The delete ran in the request: undefine, then the VM's record, then its
disk files. A request that died in between (a gunicorn worker past its
timeout, OOM, a restart), or a database write that failed after the
undefine, left a record that later showed as removed outside the panel,
and the disk files the user asked to delete were never deleted.
Deleting a VM is now an instance.delete job. It holds the compute
exclusively, as the request did, so no other VM attaches a file it is
about to delete. The job chooses the files before it stops the VM (a host
that cannot be checked still stops nothing) and records them first. It
then stops and undefines the VM, removes its record, and deletes the
files, each with its own Logs row. Recovery decides from libvirt: a VM
still on its host means the delete failed; a VM gone means libvirt did
it, so recovery removes the record and deletes the recorded files that
are still there.
The page queues the job and returns to the VM page, where the job panel
follows it and opens the VM list when it ends; disks that were kept are
the result's warning. The API's delete answers 202 with the job and
needs a submission_key. backing_path moves to wvmConnect, as recovery
has no domain to ask.
A web request refused because this process's requests to the host
(HOST_REQUESTS) all still wait for it raised the same ConnectionFailed as
a host that is down, so the VM page said the host cannot be reached. It
now raises HostBusy; the VM page and the error users who do not see hosts
get say the host is busy and to try again in a moment.
libvirt's default handler printed each error on stderr without saying
where it came from: in Docker those lines went to docker logs, and a
VM page read of a shut-off VM left one there. Every process that talks to
libvirt imports vrtManager.connection, which now registers a silent
handler; the errors still reach their callers as exceptions. The
console callback's own registration is dropped.
A run of failed opens is logged once, at its first failure, and the next
successful open ends it; a close callback and a request refused because the
host's requests still wait are logged each time. The lines go to the app log
of the process (web or job worker).
other_hosts counted the request on its own host again only when the
block ended normally: a quota check that raised left the request
counted on the other host while it went on with its own. The count is
now restored however the block ends.
upload_volume opens the libvirt stream before it creates the volume, but
created the volume outside the block that aborts the stream: a pool that
refused the volume (full, a name taken) left an unfinished stream to be
freed. The creation is now inside that block.
#394 read each host's states in one call and every domain's XML once,
for the title, memory and vCPUs. A user's list shows only their own VMs,
but it read the XML of every VM on those hosts: a user with two VMs on a
host of 300 made about 301 libvirt calls a list load, where the old
per-VM reads made 6.
get_domain_rows takes the UUIDs the list shows and reads only their XML;
the states still come in one call. The capacity reads every domain, as
before.
A host's capacity (Computes page, new VM dialog) came from
get_host_instances, which listed the VMs by ID and by name and then
looked each up, read its XML and its info: four calls a VM, for every
host on the page. It now uses the VM lists' get_domain_rows: the states
in one call and each VM's XML once. get_host_instances had no other
caller and is gone.
Checked on QEMU against the per-VM info of every domain (running, paused,
shut off): the same vCPUs and memory. A VM gone while the host is read
is left out instead of making the host's capacity unreadable.
A VM list row showed the VM's state, memory, vCPUs and title, read
through the VM's own connection object: a lookup by UUID, virDomainGetInfo
and the live XML, one after the other for every VM on the page.
The lists (Instances, grouped or not, and a compute's VMs) now read each
host once: the states in one getAllDomainStats call (the state group
only, as the lists' poll; no other group, so a VM busy in the QEMU
monitor holds nothing up) and the memory, vCPUs and title from each
VM's live XML, which the title already read. Checked on QEMU against
virDomainGetInfo for running, paused and shut-off VMs: the same values.
A VM gone from its host, or a host that cannot be read or fails its
listing, shows its VMs unknown as before. Only the grouped list, a
superuser's, prefetches every host's VMs and owners.
libvirt requires a stream that did not finish to be aborted before it is
freed. The NVRAM download of a shut-off move and upload_volume (NVRAM
upload, cloud-init seed) freed theirs after a failed send, receive or
finish without aborting, on the shared host connection. They abort now;
upload_volume opens its stream before it makes the volume, so the
cleanup has both.
A quota refusal put the English name of the quota (cpu, memory, disk,
instance) into a translated sentence, so a Turkish page read "memory
kotası doldu". check_user_quota now returns which quota and its numbers
(QuotaExceeded), each quota has a whole sentence, and the refusals put
that sentence before what is refused; QUOTA_DEBUG adds the numbers as
before. The clone job stores the refusal as a message, so the Jobs page
shows it in its reader's language.
The connection errors of vrtManager (did not answer within, still
waited for, closed, failed with libvirt's text) were English f-strings;
they are messages now, each close reason a whole one. A connection
that died without a close callback raised an error reading "None"; it
now names the host. Logs keep the English text.
A request counts on the host it connected to last. A quota check reads
every host of the user's VMs, and a VM's destruction the other hosts'
files, in the middle of a request that then goes on with the VM's own
host through the objects it kept: it was counted on the last host it
read while it used its own, so a host that does not answer could take
more requests than its limit, and the last host read was charged.
Both checks now give the request back to the host it counted on before.
vrtManager's errors (some 140: a disk that does not move, a network
address outside its subnet, a host device given to another VM, the
disks a migration cannot copy) were English f-strings, so no catalog
could translate them, on pages or in jobs.
They are marked texts with their values now; a variant that differs by
a word (internal or external, running or persistent, with a subnet or
without) is a whole message of its own, and a list of problems is a
list of messages. OperationError reads in the active language, so the
pages that show one translate it as they are; its args stay English, and
so do the logs and the audit log. Host device problems and the Migrate
tab's reasons a disk is not copied are messages too.
With threaded workers a request waiting on a stuck host holds one
thread, but each new request to that host (a VM list's poll every 5 s,
an F5) held another until the threads ran out.
In a process at most two web requests now use one host at a time,
counted by its name whatever the login. Another waits up to the connect
timeout (5 s) for one of them to end, and is then refused as the host
not answering: VM lists show the host as not reachable, pages show the
connection error. A request counts on the host it connected to last,
until it ends, so one that reads several hosts in turn holds none it
has left. Threads outside a request (the job worker's, the consoles')
are not counted: a job holds its host for as long as it runs.
A VM list showed what it read when it was loaded: a VM stopped from
inside its guest or with virsh, or made or removed elsewhere, showed only
after a reload, unlike the VM page, which reloads when its VM's state
changes. The lists of all VMs and of one host's VMs now poll the states
of their VMs, at once and then every 5 s as the VM page does, and reload
when an answer differs from the one before. The states come from one
libvirt call per host; a user who does not see hosts gets only their own
VMs. The page in use (a dialog, a field, an unsaved XML edit, a job
outcome shown) holds the reload until it is free; that check is shared
with the job panel.
Windows 11 does not install without Secure Boot and a TPM 2.0, and the new
VM form offered neither: its firmware list was BIOS and one UEFI loader
guessed from file names, which on RHEL never matched the Secure Boot one.
The firmware choices are now BIOS, UEFI and UEFI Secure Boot, as the
host's libvirt reports them (its firmware features from libvirt 12.1,
before that its loaders), and libvirt picks the firmware itself: UEFI
without Secure Boot, or with Microsoft's keys enrolled. A TPM 2.0 switch,
shown when the host has swtpm, adds an emulated TPM. The create job
refuses a firmware or a TPM the host does not offer, and the API takes
both. The path-guessing helpers are gone.
Destroying a VM with its disk files forced it off first and then
worked out which files to delete, so a check that failed left the VM
stopped, and only this host's VMs and volumes were checked: a file on
shared storage that a VM on another host uses was deleted.
The files are now worked out before the VM is stopped: the disks it
runs with and those of its next start, as before with their snapshot
files and seed. A file a VM or volume of another of the panel's hosts
uses at the same path (shared storage is mounted at one path on every
host, as migration needs) is kept like one used here; another record
of the VM's own host is skipped, as there the VM itself uses them. A
host that cannot be read stops the destruction with its name, before
anything is stopped or deleted.
The Disks tab has a Move button for each disk: it opens a dialog to
choose another storage pool of the same host, and the move runs as a job.
- Running or paused VM: libvirt copies the disk with a block job
(TRANSIENT_JOB, as the VM is persistent) into a file it creates in the
pool, then pivots. The pivot names the copy in both the running and
the next start's definition.
- Shut-off VM: the volume is copied into the pool and the copy named in
the definition.
The source file goes then, unless a VM or volume of any compute uses it
(shared storage holds it for every host that mounts it), a compute
cannot be read, or the delete fails: the job lists such a file under
"Left behind", and the move stands.
A disk moves when:
- the VM is defined and running, paused or shut off, without snapshots,
a saved state or a block job;
- the disk is a writable, unshared, unencrypted raw or qcow2 file of a
storage pool, without a backing file, and the same file in both
definitions;
- the pool keeps disk files, is another directory, and has no file of
that name (libvirt would write into it).
Otherwise it is refused with the reason before anything changes.
The job claims the VM and the file's name in both pools. A cancel aborts
the block copy, and ends the job cancelled once the VM is back on its
file. A failed move deletes the copy it made, unless a definition names
it (a lost reply after the pivot); a file there before the copy began is
never deleted. Recovery after a stopped worker
ends a copy left mirroring, matched by its destination, and reads the
outcome from the definitions.
Superusers only, like the other disk edits.
A migration needed every disk on storage both hosts share: it was refused
when the destination lacked a disk file, and a file of the same name
there was taken for the VM's own disk.
The Migrate tab now lists the VM's disk files for the chosen destination.
For each disk it offers the destination's pools that keep disk files
(directory, filesystem and NFS pools). A disk on storage both hosts share
can also stay where it is.
A directory counts as shared when both hosts have it as a storage pool
and a marker file created on the source exists on the destination. A
directory the probe cannot tell is never taken as shared.
libvirt copies the chosen disks during the migration: migrate3 with
NON_SHARED_DISK for those targets, and destination and persistent
definitions naming the new paths, where libvirt creates the files.
- A shut-off VM is started paused for the copy and shut off on the
destination; its CPUs never run. Its UEFI variables are copied first,
as the destination would start from the firmware's template. If the
migration fails, the VM is shut off on the source again.
- Refused before anything changes, each disk with its reason:
- a disk neither shared nor given a pool, also one only the next
start's definition has;
- CD-ROM images, read-only or encrypted disks, formats other than raw
and qcow2, and disks with a backing file;
- a pool that is not of disk files, or that has a file of that name,
which libvirt would reuse and overwrite;
- two disks copied to one file.
- The job claims each copy's name in its pool, and the source volume.
- A failed or cancelled migration deletes the copies libvirt made, and
the UEFI variables copy, unless a VM on the destination has them.
- The source files stay and are named in the log. With "Delete the
source files of copied disks" they go, except one another VM or volume
uses; a failed delete is logged and the migration stands.
The NVRAM sharing check uses the same probe: a shut-off move stops when
it cannot be told, and the source file stays.
The API's migrate call takes disk_pools ({target: pool}) and
delete_source.
- A secret is in use when a VM names it in a disk, a host device or its
vTPM, or a pool in its source, by UUID or by its usage within the usage
type, as they run and as saved. The vTPM, host devices and pools' saved
definitions were not checked before.
- A Ceph key is taken in base64, as `ceph auth get-key` prints it; any other
value is a password or passphrase stored as typed, spaces included.
- A new secret takes its value at once; a value refused leaves no secret.
- TLS and vTPM secrets can be created; the usage has no length limit.
- Every POST redirects; the list is read once and only with its users; a
secret, VM or pool gone meanwhile is left out.
- domain_trees() is shared by the in-use checks of secrets, network filters,
networks and pools; the storage page's Ceph secret picker reads the same
listing.
Plan reviewed with Codex; tried on a udev host (AlmaLinux 10) and a
netcf one (AlmaLinux 8).
- Changes are one change of the host's configuration (libvirt's
interface change transaction): a bridge that does not start used to
be undefined, leaving its member without the addresses and start
mode the bridge took from it; now the whole change rolls back, the
member's own configuration too, and so does a commit libvirt refuses.
A rollback that fails too is reported with the failure, saying the
host's configuration may be changed.
Deleting a bridge, which defines its
members again on their own, is one change as well.
- A running interface is not deleted: the page hid Delete, but a post
deleted it. A bridge with addresses and several members is refused
(which member takes the addresses is the user's choice); the
confirmation says that its members are defined again.
- A bridge takes only a device in no bridge, bond or VLAN as the host
has them configured, at any depth (a bridge's bond's devices), not
the loopback, a libvirt network's bridge or a VM's tap; an ethernet
interface configures only such a device too.
- Whether the host can change interfaces: unsupported or refused by
its access rules is a no, bad XML a yes, anything else (the
connection, the login) is raised instead of taken for a yes. A page
whose host could not be read offers no actions.
- Reads: the list reads each interface's XML once from one listing
(listAllInterfaces: every state, not the active and the defined ones
apart); a page reads the running and the saved definition once each
(cached_property). netcf writes a link speed of -1 for a card that
has none (a virtio one) and then refuses its own XML: the saved one
is read instead, where virsh and the page failed. Name and MAC come
from libvirt's object, without a call. Each family says how it is
addressed (DHCP, autoconf, static or none) and every address, its
prefix where it has one; no
address is not "DHCP" any more. A bridge's members carry their link
state and speed; an unknown speed (0, -1, 4294967295) is none.
- The interface API lists from the same reader. get_details,
get_bridge, get_bridge_slave_ifaces and the per-family getters go.
Cloud images read their first-boot settings with cloud-init. The panel
served them only over HTTP, which a VM reaches only with the network
and a reverse DNS name for its address. A new VM can now carry them
itself: Cloud-init seed (Advanced) on the create form, or cloud_init in
the API.
The job writes a NoCloud seed, an ISO labelled cidata, into the disk's
directory pool as cidata-<uuid>.iso and puts it in the VM's CD-ROM
drive. Its meta-data holds the VM's UUID as instance-id and its name as
hostname, written as JSON so a VM named 123 or yes keeps a string
hostname; its user-data is what the HTTP datasource serves, with the
creating user's SSH keys. The ISO is built with pycdlib and written
through a libvirt stream, as the NVRAM copy is, now one helper for both.
A seed needs a CD-ROM bus and a directory pool, else the create is
refused. A failed create deletes the seed with the new disk, recovery
names one left behind, and deleting the VM with its disks deletes its
seed, found in the pools by name even when ejected. A clone's drive is
left empty: the seed is the source VM's identity.
Stopping a network cut the running VMs on it off, deleting one or a
secret kept the VMs that name it from starting, and stopping a pool
took the disks of running VMs away, all without a word. Each is now
refused with the VMs (and, for a secret, the pools) that need it:
stopping while a running VM uses it, deleting while a VM's definition
names it. A disk given by its file path does not need its pool's
definition. The API's pool stop is refused the same way.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The move copies the VM's NVRAM file to the destination with libvirt
streams (unless both hosts share the NVRAM directory) and removes the
copy if the move fails; the source's file goes with the existing
cleanup. The undefine keeps the file, as libvirt refuses to undefine a
VM with NVRAM otherwise. A VM with TPM state is still refused.
libvirt deletes any volume it is asked to. The storage page and the API
deleted a VM's disk, the base image of another volume or the file a
snapshot was taken on without a check, breaking the VM or its
snapshots.
wvmStorage.del_volume now refuses a volume a domain on the compute uses
as a disk or a backing file of one, a file of a domain's snapshots, or
the backing file of another volume. The check is the one destroy
already used, moved to wvmConnect and extended to snapshot files, so
destroy also keeps the files of another VM's snapshots. The storage
page shows the refusal; the API answers 400 with it, as for other
refusals. Deleting a disk from a VM refuses after the detach when the
VM's own snapshots need the volume, and says the volume was kept.
Network disks count by their source name, pool volume disks by their
volume's path. A volume whose metadata cannot be read stops the check
instead of counting as unused; only one removed meanwhile is skipped.
The check and the delete hold the compute lock, so no VM operation
attaches the volume in between; a busy compute is a message on the page
and 409 in the API.
libvirt's udev interface backend (RHEL 9 and later, Debian 12) only reads
interfaces, so the create form and the start, stop and delete buttons
only failed there. The pages ask the host with an invalid definition,
which defines nothing: a backend without define refuses it as not
supported. There they show the interface state and a note instead, and
posts change nothing; the host's devices, needed only by the create
form, are not read. Any other answer keeps the pages as they were.
The interfaces page read the XML of every node device (183 on a test host)
to keep the network ones; libvirt now lists only those. Same names on both
test hosts, 756 -> 261 ms over TCP and 475 -> 173 ms over SSH.
Cloning a UEFI VM defined a persistent storage pool on the NVRAM's
directory when no pool held it, and dropped <nvram> from the clone,
which found its copy only because libvirt chose the same file name.
The copy is now made through the NVRAM directory's pool (a transient one
when there is none) or the pool that holds the file, with the original's
format, owner and mode, and the clone's definition names it. A failed
definition removes it with the copied disks. An NVRAM that is not a file
is refused before anything is copied.
A volume of an LVM or iSCSI pool can be attached: by its own path, with
the format its volume reports (raw when the pool knows none). Detaching
a disk takes each definition's own description of it, so a disk only in
the persistent definition goes too. Every NIC type can be a boot device;
bridge and direct NICs were dropped from the boot order. The video model
is a value, never parsed as XML. QoS changes clear the page's read cache.
The NIC model "default" leaves the choice to libvirt instead of writing
model "default", and rt18139 is rtl8139: a VM with either did not start
(checked on a RHEL 10 host). A migration corrects the default NIC type
setting.
The overview read the host's info four times, now once (12 libvirt calls).
A connection object keeps it next to the capabilities, and the VM page and
VM stats take it from there; the VM page's cached_reads block holds only
the VM's own data. Free memory is still read each time.
Measured on the create page: 751 ms and 72 libvirt calls, now 123 ms and
13. Its getters parsed the host's capabilities some 60 times, each read
from libvirt. A connection object (one per request) now reads them once,
and the domain capabilities once per emulator, arch, machine and domain
type. The VM page's cached_reads block no longer needs its own copy.
libvirt undefines the source domain after a migration but keeps its NVRAM
file. A VM created later on that host with the same name reuses the file
and starts with the old VM's UEFI variables (boot entries, enrolled keys):
checked on libvirt 11.10, where only VIR_DOMAIN_START_RESET_NVRAM
recreates it from the template.
After a successful migration the file is now deleted on the source, as a
volume of the pool on libvirt's NVRAM directory or of a transient one.
Only a file in /var/lib/libvirt/qemu/nvram, and only when the destination
cannot create a marker file the source just created there (an exclusive
create also fails on shared storage whose listing an NFS client caches).
A failed removal is logged with the migration, which stands and is
recorded.
When a VM action failed because its host could not be reached (the
connection could not be opened, or it dropped during the call), the
error page showed libvirt's connection error to any user: it names the
host and how it is reached, e.g. "ssh: connect to host 10.x port 22".
The lists and the VM page already keep that to administrators.
- Opening a connection now fails with ConnectionFailed (a subclass of
OperationError). A dropped connection is recognized by its error
domain and code (RPC/remote/SSH layer with a transport code, measured:
a keepalive timeout is VIR_FROM_RPC/VIR_ERR_INTERNAL_ERROR); an
operation the daemon does not support (VIR_ERR_NO_SUPPORT) is not
treated as one.
- ExceptionMiddleware (pages and API) and the views that report the
error themselves (snapshot, revert, disk deletion, clone) show it to
superusers and view_instances users, and to everyone else "The host
of this virtual machine cannot be reached right now." Errors of the
operation itself ("domain is not running") are shown as before.
Checked on the test setup: powering on a VM of an unreachable compute
shows the owner the generic text and the administrator the error. The
tests fail on the previous code.
Four lookups built XPath expressions from values that come from
requests (CodeQL py/xpath-injection, plus get_capabilities, which
CodeQL did not flag; the pages are for superusers):
- The architecture in the create wizard's URLs went into
arch[@name='...'] in get_emulator, get_machine_types and
get_capabilities: "nope' or '1'='1" matched every architecture. It is
now an XPath variable ($arch), which is never parsed as XPath.
- Network filter rules were found with a predicate built from the
posted action, direction and priority: a quote raised SyntaxError (an
error page). The rule is now found by comparing its attributes.
- unset_qos put the posted direction into the path, so "*" removed
every bandwidth setting. It accepts inbound and outbound, as set_qos
does; the network page shows an error for anything else.
No other XPath in vrtManager is built from a value; the remaining
expressions are constants. The tests fail on the previous code.
The connection manager registered libvirt's event implementation and
started the event loop thread when vrtManager.connection was imported.
novncd imports it and then forks a child per console (websockify's
multiprocessing), so every child was forked from a process with a
running libvirt thread, which libvirt does not support, and the child
had no loop thread of its own: keepalive never ran there. Measured in
the test setup: in such a child, a call on a host that went silent
still waited after 70 s.
- The loop starts with the first get_connection of a process. The
state is per process and shared by all managers; libvirt's event
implementation is registered once and a child inherits it.
- After a fork, the child renews the lock and starts its own loop on
first use. It stops using the inherited connections, which are the
parent's sockets, but keeps them: releasing them would run libvirt
destructors in the child. No process connects before forking today
(novncd's parent does not connect, gunicorn does not preload); this
keeps such a case safe.
With the change, novncd's parent has no libvirt thread, the console
child starts its own, and the same call fails after 29 s with a
keepalive timeout. A test forks a real child; it fails without the
fork handling.
libvirt has no timeout for opening a connection. Measured in the test
setup: an unreachable host blocked qemu+tcp for 135 s and qemu+ssh for
133 s; a daemon that accepts and never answers blocks forever. Gunicorn
runs sync workers and the instance list connects to every compute, so
one unreachable compute held a worker for minutes per page load.
- A connection is opened in a helper thread, at most one per
connection at a time. The request waits LIBVIRT_CONNECT_TIMEOUT
(default 5 s). An open nobody waits for any more keeps running; until
it ends, requests get its error at once, and if it succeeds later the
connection is used. A failed open is not repeated for
LIBVIRT_RETRY_AFTER (default 30 s). A stuck host holds one thread and
does not keep other hosts from connecting.
- qemu+ssh runs ssh through vrtManager/libvirt-ssh (the URI's command
parameter), which adds ConnectTimeout=10 and BatchMode=yes, so an
abandoned ssh process ends and no prompt can hang. The user's ssh
configuration (aliases, ProxyJump, keys) still applies.
- The close callback acts only for the connection it was registered
for: a late callback of a replaced connection dropped its successor.
The reason is reported as text. A connection that closed before it
was published is an error.
- Compute.status is a bool (it returned the exception object, so the
"host is down" check in refresh_instance_database never fired); the
message is Compute.connection_error.
Unit tests cover the timeout, retry delay, late success, single open,
a stuck host next to a healthy one and the close callback. Live tests
(vrtManager/test_live_connection.py), for TCP and SSH computes of the
test setup: an unreachable address (no ssh left after 10 s), an endpoint
that never answers, a slow open completing later, a host that goes
silent on an established connection (keepalive ends calls within 45 s,
the next request reconnects), an ssh_config alias and a ProxyJump host.
- host_is_up returned the exception object for a down host, which is
truthy: check_user_quota then connected to it and failed, so a user
with a VM on a down host could not open its page, clone or resize,
and migrate_instance's "target is down" check never fired. It returns
True or False now, closes its socket, and accepts IPv6 and host:port.
- The connection manager no longer holds its global lock while a new
connection is opened, so one slow host does not delay new connections
to the others.
Bounding the connection time itself (including SSH aliases and jump
hosts) is left for a separate change.
Clone:
- only shut-off VMs are cloned, as the UI already required: a running
guest keeps writing while its disks are copied; the definition comes
from the persistent XML;
- MAC addresses and disk destinations are checked before anything is
allocated;
- every volume the clone creates (NVRAM and disks) is tracked; if a
later copy or the definition fails, only those are deleted, and any
that cannot be deleted are named in the error. Before, a failed clone
left its earlier copies behind.
libvirtError(msg) reports the thread's last libvirt error instead of
msg when there is one, so WebVirtCloud's own errors could show an
earlier, unrelated failure. util.OperationError, a libvirtError
subclass that keeps its message, replaces those raises in vrtManager,
instances and nwfilters; 'except libvirtError' still catches it.
SPICE was removed earlier; its leftovers and the console type choice go
too:
- the console settings form, update_console and the backend no longer
offer or change the type; an invalid console form now shows its
errors instead of being ignored;
- the create form, the API serializer and create_instance no longer take
a graphics type, new VMs get VNC; get_graphics_types and the graphics
entries of the domain capabilities are gone;
- migration appsettings.0013 deletes QEMU_CONSOLE_DEFAULT_TYPE;
- a VM defined elsewhere with another graphics type gets "Console type
... is not supported".
The locale catalogs still reference the deleted SPICE templates in
source comments; regenerating them is left to the translation work.
