As the storage and network pages; plan reviewed with Codex.
- The list is grouped by type (bridges, bonds, VLANs, ethernet; a type
the host has none of is left out), three cards a row, with a search
of their names, MACs and networks (table_filter.js, which now takes
any element with data-search as a row); a card per interface: its link
as the kernel reports it (up green, down grey, another state or
unknown told as such, no red card for a link that is merely down),
MAC, MTU, speed when known, the members it reports and the libvirt
networks that use it, linked.
- An interface's page: an Interface card (type, libvirt's own state
where it manages interfaces, link, start mode, MAC, MTU, speed, STP,
networks using it); on a host whose libvirt changes interfaces, a
card per family with how it is addressed and its addresses; the
members of a bridge, bond or VLAN with their link and speed, or that
none is reported; for a bridge, the running VMs' cards on it,
directly or through a network using it, with their tap and MAC,
linked (wvmInterface.get_vms: one domain listing). Not the bridge's
delay: netcf tells it in seconds, the udev backend in hundredths.
Start or Stop in its heading, Delete in its menu, disabled while it
runs, on hosts that can change interfaces only.
- A host whose libvirt only reads interfaces says so once, with that
it does not tell their addresses, instead of "None" on every page.
- The New interface dialog is one form, as the New pool and New
network ones (choice_dialog.js, radio_card.html): Bridge or
Ethernet, a bridge's member from the devices it can take, an
ethernet interface's device from the ones the host does not define
yet, a static address's fields with its choice; a refused interface,
or one libvirt refuses, opens it again with what was entered; a made
one opens its page.
- networks_by_device maps the libvirt networks to their bridges or
interfaces on the page's own connection.
Plan reviewed with Codex; tried on a udev host (AlmaLinux 10) and a
netcf one (AlmaLinux 8).
- Changes are one change of the host's configuration (libvirt's
interface change transaction): a bridge that does not start used to
be undefined, leaving its member without the addresses and start
mode the bridge took from it; now the whole change rolls back, the
member's own configuration too, and so does a commit libvirt refuses.
A rollback that fails too is reported with the failure, saying the
host's configuration may be changed.
Deleting a bridge, which defines its
members again on their own, is one change as well.
- A running interface is not deleted: the page hid Delete, but a post
deleted it. A bridge with addresses and several members is refused
(which member takes the addresses is the user's choice); the
confirmation says that its members are defined again.
- A bridge takes only a device in no bridge, bond or VLAN as the host
has them configured, at any depth (a bridge's bond's devices), not
the loopback, a libvirt network's bridge or a VM's tap; an ethernet
interface configures only such a device too.
- Whether the host can change interfaces: unsupported or refused by
its access rules is a no, bad XML a yes, anything else (the
connection, the login) is raised instead of taken for a yes. A page
whose host could not be read offers no actions.
- Reads: the list reads each interface's XML once from one listing
(listAllInterfaces: every state, not the active and the defined ones
apart); a page reads the running and the saved definition once each
(cached_property). netcf writes a link speed of -1 for a card that
has none (a virtio one) and then refuses its own XML: the saved one
is read instead, where virsh and the page failed. Name and MAC come
from libvirt's object, without a call. Each family says how it is
addressed (DHCP, autoconf, static or none) and every address, its
prefix where it has one; no
address is not "DHCP" any more. A bridge's members carry their link
state and speed; an unknown speed (0, -1, 4294967295) is none.
- The interface API lists from the same reader. get_details,
get_bridge, get_bridge_slave_ifaces and the per-family getters go.
- The create form refuses a name the host already defines. Defining it
again replaced that interface's configuration, for example the host's
own uplink when a bridge was named after it.
- An interface that does not start is undefined again, so the name is
free for another try; the name check above makes this safe.
With the netcf backend (RHEL/AlmaLinux 8), undefining a bridge also
removes its members' configuration: the device came back without any
after a reboot. Like virsh iface-unbridge, each member is now defined
again on its own after the bridge is undefined, with the bridge's start
mode and, when it is the only member, its addresses. A bond keeps its
mode and devices.
Checked on AlmaLinux 8 (libvirt 8.0, netcf): an ethernet and a bond
member get their ifcfg back, and the bond comes up with the address
after a reboot.
A new bridge always declared its member as type='ethernet'. On a host
with the netcf backend that rewrote the member's configuration: a bond
lost its BONDING_OPTS and a vlan its VLAN=yes. The member is now taken
from the host's own definition of the device (a bond keeps its mode and
devices, a vlan its tag), without the start mode, MTU and addresses that
only a top-level interface has; a device the host does not define stays
ethernet.
The IPv4 address and gateway were required even for DHCP or no IPv4, so
such an interface could not be created; malformed addresses passed and a
missing prefix crashed the XML builder. They are validated like the IPv6
fields now (netmask notation accepted, IPv6 scope ids rejected), and a
static address without a gateway gets no empty route. Interface names
follow the Linux rule (up to 15 letters, digits, . _ -). A bridge member,
or the device an ethernet interface configures, must be a device of the
host (the page no longer falls back to made-up names), a bridge cannot
contain itself, and needs STP and a non-negative delay.
The form checked both with re.match("^[0-9a-f./:]+|^$"), which tests
only how a value starts: "2001:db8::10/64'/><evil/>" passed and went
into the interface XML, which is built with f-strings, while upper-case
hex was refused. An address without a prefix passed too and then failed
with a ValueError when the XML was built.
The address is parsed with ipaddress.IPv6Interface and stored as
address/prefix (/128 when none is given), the gateway with
IPv6Address. A static configuration needs an address, and the XML gets
a route only when a gateway is given instead of gateway=''. The HTML
patterns accept upper-case hex.
Eight of the ten form and XML checks fail on the previous code.
* Add rest framework for API: First Commit
* modify some shell scripts to make variable references safer; modify some python scripts to reduce the code complexity and cyclomatic complexity of functions.
* Add REST API for some webvirtcloud functions. Instance list/delete/create, compute list/delete/create, storages-network list/retrieve. Add swagger and redoc for API interface
* update requirements
Co-authored-by: herengui <herengui@uniontech.com>
