A checkbox marked a device as booting and also chose what Up and Down
moved, which moved every checked device at once: to move one device the
others had to be unchecked and checked again. The buttons sat apart
from the rows, and a VM booting by device type got a note that did not
say what to do.
Now the devices the VM tries are a numbered chain, each with its own
up, down and Remove, and the others are listed below it with Add; the
posted order is unchanged. Devices read by kind first (CD-ROM sda,
Disk vda) with their file or network below; a VM booting by device
type says so and how to choose an order. Autostart and the boot menu
sit below, lighter. Focus stays on the device that moved, and on a
narrow screen a device's buttons wrap below its name.
The Turkish catalog says "Ön yükleme" and "sanal makine" throughout,
also in the Power tab texts.
A running VM got its new CD-ROM on SCSI, the one bus the panel could plug
in then, and Windows does not see a virtio-scsi drive before the driver
on that ISO is installed. Add CD-ROM is now a dialog that chooses the bus
and the ISO: a running VM takes USB, first, which every guest sees and
which hot-plugs, or SCSI; a shut-off one SATA (IDE on pc), SCSI or USB.
libvirt has no empty USB drive, so a USB CD-ROM takes its ISO when it is
added and is detached instead of ejected, also while the VM runs.
A USB CD-ROM is a CD drive on QEMU's usb-bot only. Where QEMU has none
(RHEL 9), libvirt took usb-storage, which shows the guest a hard disk
that Windows does not read; the drive now asks for usb-bot, and such a
host refuses it with libvirt's message.
Settings > Options was four forms under bold sentences, most of them
disabled while the VM ran. The owner chose this layout from three
rendered options: one list, each row a setting with its description on
the left and its control on the right: VM details (title, description),
Template, primary video model, QEMU guest agent. vCPU hot plug moved to
Resize > CPU, next to the vCPU counts.
Codex reviewed the four forms; these are fixed:
- Title, description and the video model are saved while the VM runs:
they are in the persistent definition, used at the next start.
- The template flag has its own form and view, set_template, for
superusers and staff, and only for a shut-off VM: a running VM made a
template left the quota while it kept running. Turning a template
back into a VM checks the quota there, and each change is audited.
The title form no longer touches the flag.
- A new video model stays the primary one; the old model's memory and
head settings, which are its own, go with it.
- The agent and vCPU hot plug forms show the persistent definition; they
showed the running VM's, so a pending change looked undone.
- Enabling the guest agent adds its channel only where it is missing:
saving Enabled again failed, and a channel pending the next start kept
a running VM from getting one.
- The agent line tells a VM that is not running, one without a channel,
and a connected or not connected agent apart.
The Boot pane shows Autostart and the boot menu as switches that save on
change, and the boot order as one list of the VM's disks, CD-ROM drives
and NICs: the devices in the order first, checked and numbered, the
others below. Up and Down move the checked devices; Apply order saves.
- The boot menu can be changed while the VM runs: it is in the
persistent definition, so it applies at the next start, as the boot
order does.
- The boot order editor no longer needs the boot menu enabled.
- A VM that boots by device type (<os><boot dev='hd'/>) names those
types; checking devices replaces that order.
- An order is refused while a device the list does not show (a host
device, a floppy) has a boot place, so Apply does not drop it; the
message points to the XML editor.
- An empty order is refused with a message instead of being ignored.
- get_bootorder gives a NIC's full MAC as its target.
- The unused jQuery multiselect plugin is removed.
Settings > Network was a table whose fields were read-only inputs cut
off at phone width, an unlabelled "+", three icon buttons per NIC and
a separate QoS table keyed by MAC. The owner chose card layout from
three rendered options, with the QoS limits folding out like the
device details:
- A card per NIC: a VM's only NIC spans the row, two or more sit side
by side from md. Each has its name and target, the link state as a
switch, its source and IPv4 addresses, and "Device details"
(type, MAC, model, NWFilter, IPv6) in a <details>.
- "QoS limits" in a second <details>, its summary naming the limited
directions: a form per inbound or outbound limit, with Save and
Delete limit, and the units.
- Labelled Edit, Add QoS and Delete in the card footer; "Add network
device" by the heading. The edit and add-QoS dialogs are titled and
labelled, and the edit dialog's fields have labels.
The limits come from each NIC of the persistent definition, so the QoS
table, Instance.config_qos and wvmInstance.get_all_qos are removed.
42a1783 refuses a vCPU change on a running VM, also on a direct
request: the VM would get them only at its next start, past the quota
counted now. The live data-loss test still posted vCPUs to a running VM
and expected the change to be pending, so it failed on every connection
type. It now expects the refusal, with its message, and the definition's
vCPUs unchanged; the pending options part is as before.
The live suite run against v3.1.0 on two Vagrant computes (TCP and SSH,
TLS, a socket inside compute1) found two tests that no longer held, and
nothing else:
- A SATA disk added to a running VM is refused by libvirt; since
90c148d a refused form goes back to its page with the reason instead
of a 500. The test expected the 500; it now expects the redirect and
the message, and still checks that neither definition changed.
- The NVRAM copy test built its libvirtError("define failed") and
matched that text, but libvirt-python gives a new libvirtError the
message of the last error its thread recorded: in the socket run a
connection of an earlier live test was closed by then ("client socket
is closed"). The test now checks that its own error object is raised.
libvirt deletes any volume it is asked to. The storage page and the API
deleted a VM's disk, the base image of another volume or the file a
snapshot was taken on without a check, breaking the VM or its
snapshots.
wvmStorage.del_volume now refuses a volume a domain on the compute uses
as a disk or a backing file of one, a file of a domain's snapshots, or
the backing file of another volume. The check is the one destroy
already used, moved to wvmConnect and extended to snapshot files, so
destroy also keeps the files of another VM's snapshots. The storage
page shows the refusal; the API answers 400 with it, as for other
refusals. Deleting a disk from a VM refuses after the detach when the
VM's own snapshots need the volume, and says the volume was kept.
Network disks count by their source name, pool volume disks by their
volume's path. A volume whose metadata cannot be read stops the check
instead of counting as unused; only one removed meanwhile is skipped.
The check and the delete hold the compute lock, so no VM operation
attaches the volume in between; a busy compute is a message on the page
and 409 in the API.
Deleting a VM with its data deleted only the images its disks pointed
at. With external snapshots that is the newest overlay: the image the
snapshots were taken on, the older overlays and the memory files stayed
on disk, with nothing referring to them once the VM and its snapshot
metadata were gone.
The files the VM's snapshots were taken on, down each disk's backing
chain, the overlays of snapshots kept off the chain after a revert, and
the snapshots' memory files are now the VM's own too. A template the
VM grew from ends the chain and stays, as does an overlay of a disk
detached since. The backing references of the VM's own volumes no
longer count as another domain's use, and a file another VM uses keeps
the files below it.
A backing file that cannot be read (other than one in no pool) stops the
split before anything is deleted, instead of ending the chain there.
Create, revert and delete are one libvirt call each. The pflash-to-rom
loader rewrite, the hand-written block commit and the s1./s2. names are
gone, so UEFI VMs can take external snapshots, a revert keeps disks added
later, and deleting an older snapshot keeps the newer one.
Create refuses what libvirt could not revert or delete later: internal
snapshots on the VM, a saved state, a running snapshot job, disks that
are not files, CD-ROM media, a branch after a revert, and memory without
a running VM or room in the first disk's pool. A disk-only revert keeps
the VM running, paused or shut off; one with memory resumes it as saved.
A revert in the same second as the previous one, which libvirt fails
after stopping the VM, is retried once.
A snapshot the old code took of a UEFI VM saved the loader as rom; its
revert is refused (deleting it still works).
The snapshots tab lists internal and external snapshots separately, can
save memory too, shows running snapshot jobs, and the revert confirmation
names the disks it detaches and that NVRAM is not restored.
131 test modules sat next to the code they test; instances alone had
51 of them beside views.py and utils.py. They move into a
tests/ package per app, and the JavaScript checks into
webvirtcloud/tests/js. Each non-empty tests.py becomes tests/test_views.py;
the empty generated stubs are removed.
Imports of the app's own modules become absolute, paths built from
__file__ go one level up, the live helper is instances.tests.livetest,
and coverage omits */tests/*. The suite discovers the same 960 tests as
before.
2026-10-12 15:17:30 +03:00
Renamed from instances/test_live_dataloss.py (Browse further)
