A quota refusal put the English name of the quota (cpu, memory, disk,
instance) into a translated sentence, so a Turkish page read "memory
kotası doldu". check_user_quota now returns which quota and its numbers
(QuotaExceeded), each quota has a whole sentence, and the refusals put
that sentence before what is refused; QUOTA_DEBUG adds the numbers as
before. The clone job stores the refusal as a message, so the Jobs page
shows it in its reader's language.
The connection errors of vrtManager (did not answer within, still
waited for, closed, failed with libvirt's text) were English f-strings;
they are messages now, each close reason a whole one. A connection
that died without a close callback raised an error reading "None"; it
now names the host. Logs keep the English text.
A job stored its error and its result's warning as English text, much
of it built with the values in it (volume paths, a disk, libvirt's
error), so no catalog could translate it, and the job pages and panel
showed English whatever the language.
A job now stores them as messages: our English text, marked for
translation, and its values; libvirt's own text is a message without
values and is shown as it is. The jobs API and pages put them in the
reader's language. OperationError keeps its text and values apart for
the same reason, so a refusal raised while a job is submitted is shown
translated too. Messages one after another still read as sentences.
Errors stored before are kept as one message each, shown as they were.
A VM made from a template came out at the template's size and shut off,
and was then resized and started by hand. The Clone tab now asks for the
clone's vCPUs and memory, filled in with the VM's, and whether to start
it. After the copy, before the clone is recorded, it is resized with the
Resize tab's own functions and started; a step that fails is a warning
of the job, and the clone stays. The quota counts the larger of the size
asked and the VM's, so a resize that fails leaves the clone at a size it
allowed.
When the job ends the page opens the clone's, not the cloned VM's again:
a template's page, shut off, read as a clone that had not started. An
outcome kept for a warning links to it.
A live migration whose source host could not resolve the destination's
name for the migration stream failed with "The host of this virtual
machine cannot be reached right now": libvirt reports that failure as a
connection error, and a job's error hides those behind that sentence so
as not to name hosts. Only superusers migrate, so the migration job now
fails with libvirt's own words, here "Unable to resolve address ...",
which points at the destination's Migration address.
Windows 11 does not install without Secure Boot and a TPM 2.0, and the new
VM form offered neither: its firmware list was BIOS and one UEFI loader
guessed from file names, which on RHEL never matched the Secure Boot one.
The firmware choices are now BIOS, UEFI and UEFI Secure Boot, as the
host's libvirt reports them (its firmware features from libvirt 12.1,
before that its loaders), and libvirt picks the firmware itself: UEFI
without Secure Boot, or with Microsoft's keys enrolled. A TPM 2.0 switch,
shown when the host has swtpm, adds an emulated TPM. The create job
refuses a firmware or a TPM the host does not offer, and the API takes
both. The path-guessing helpers are gone.
The Migrate tab offered every other host alike, and its plan showed
neither a file of the same name in a destination pool nor the disks of
the VM's next start, which the job then refused. Now:
- When the tab opens, the hosts are checked first: one that cannot be
reached, or the VM's own host under another record (the same libvirt
host UUID), is shown with why and cannot be chosen, and the disks of
the first one left are checked. The job refuses the VM's own host
under another name too.
- A pool of the destination that has a file of a disk's name is shown
but cannot be chosen for it; a disk no pool can take refuses the form.
- The next start's file disks the migration does not carry are listed;
one not on storage both hosts share refuses the form, as the job does.
A user's quota counted each VM's running vCPUs, memory and disks, so a
larger value set for the VM's next start was not counted, and a clone
counted only once its VM was recorded, so a user could queue clones
past the quota. Now:
- Each VM counts the larger of its running and its next-start values.
- A clone job counts as one VM with the source's persistent vCPUs,
memory and disk size, which its plan stores, from its admission until
its VM is recorded; a failed, cancelled or resolved job no longer
counts. The clone's VM and its owner are recorded in one transaction,
so the quota counts either the job or the VM, never neither.
- The quota reads each VM's definition once (cached_reads).
A user who is not a superuser chooses the clone's name from the free
names the clone form lists, or gets the first one with automatic names,
but the server took any posted name. It now refuses a name outside the
list, and with automatic names it takes the first free one whatever is
posted. A superuser still names a clone freely.
The panel checks VM names on every compute, but a job held a name only
on its compute, so two clones from VMs on two hosts could take the same
free name at once; a name claim now holds the name everywhere. A clone
job whose name a VM found on a host took while it was queued stops
before it copies anything.
Settings > Clone was a horizontal form with unlabelled checkboxes. The
owner chose this layout from three rendered options: the clone's name
on top, a "Network" card with a new MAC address per NIC, a "Storage"
card with a new volume name per disk, then the optional title and
description and a footer with Clone.
Codex reviewed cloning end to end; these are fixed:
- Every NIC of the clone gets a new random MAC when the form opens.
Only the first did, so a VM with two NICs gave its clone the second
NIC's MAC. Guess MAC is offered for the first NIC only: a name's DHCP
host entry holds one address.
- A VM without a NIC can be cloned: the first NIC's MAC was required.
- The disk name script uses the persistent disks, as the form does; a
disk added pending the next start kept the source's volume name.
- A running or paused VM is not cloned while a copied disk changes at
the next start: the backup copies the running disk, so the clone
would get the old contents under the new definition.
- A derived volume name that does not start with the source's name now
starts with the clone's name and the disk's device, so a second clone
or a second disk does not take the same name.
- Guess for the clone name says when the DHCP file has no free name; it
stopped with a script error.
- The qcow2 metadata preallocation box shows only for a shut-off VM: a
live clone's backup ignores it.
Other users no longer get hidden MAC and disk inputs or the scripts that
filled them: the server derives those values and ignored the posted ones.
The Disks tab has a Move button for each disk: it opens a dialog to
choose another storage pool of the same host, and the move runs as a job.
- Running or paused VM: libvirt copies the disk with a block job
(TRANSIENT_JOB, as the VM is persistent) into a file it creates in the
pool, then pivots. The pivot names the copy in both the running and
the next start's definition.
- Shut-off VM: the volume is copied into the pool and the copy named in
the definition.
The source file goes then, unless a VM or volume of any compute uses it
(shared storage holds it for every host that mounts it), a compute
cannot be read, or the delete fails: the job lists such a file under
"Left behind", and the move stands.
A disk moves when:
- the VM is defined and running, paused or shut off, without snapshots,
a saved state or a block job;
- the disk is a writable, unshared, unencrypted raw or qcow2 file of a
storage pool, without a backing file, and the same file in both
definitions;
- the pool keeps disk files, is another directory, and has no file of
that name (libvirt would write into it).
Otherwise it is refused with the reason before anything changes.
The job claims the VM and the file's name in both pools. A cancel aborts
the block copy, and ends the job cancelled once the VM is back on its
file. A failed move deletes the copy it made, unless a definition names
it (a lost reply after the pivot); a file there before the copy began is
never deleted. Recovery after a stopped worker
ends a copy left mirroring, matched by its destination, and reads the
outcome from the definitions.
Superusers only, like the other disk edits.
A migration needed every disk on storage both hosts share: it was refused
when the destination lacked a disk file, and a file of the same name
there was taken for the VM's own disk.
The Migrate tab now lists the VM's disk files for the chosen destination.
For each disk it offers the destination's pools that keep disk files
(directory, filesystem and NFS pools). A disk on storage both hosts share
can also stay where it is.
A directory counts as shared when both hosts have it as a storage pool
and a marker file created on the source exists on the destination. A
directory the probe cannot tell is never taken as shared.
libvirt copies the chosen disks during the migration: migrate3 with
NON_SHARED_DISK for those targets, and destination and persistent
definitions naming the new paths, where libvirt creates the files.
- A shut-off VM is started paused for the copy and shut off on the
destination; its CPUs never run. Its UEFI variables are copied first,
as the destination would start from the firmware's template. If the
migration fails, the VM is shut off on the source again.
- Refused before anything changes, each disk with its reason:
- a disk neither shared nor given a pool, also one only the next
start's definition has;
- CD-ROM images, read-only or encrypted disks, formats other than raw
and qcow2, and disks with a backing file;
- a pool that is not of disk files, or that has a file of that name,
which libvirt would reuse and overwrite;
- two disks copied to one file.
- The job claims each copy's name in its pool, and the source volume.
- A failed or cancelled migration deletes the copies libvirt made, and
the UEFI variables copy, unless a VM on the destination has them.
- The source files stay and are named in the log. With "Delete the
source files of copied disks" they go, except one another VM or volume
uses; a failed delete is logged and the migration stands.
The NVRAM sharing check uses the same probe: a shut-off move stops when
it cannot be told, and the source file stays.
The API's migrate call takes disk_pools ({target: pool}) and
delete_source.
- A Host devices tab on the VM page lists the VM's USB host devices, each
once: how it is chosen (its address, or any device of its model), the
device the running VM holds and whether its next start has it; its other
host devices (PCI, SCSI, mediated) are listed for the XML editor.
- Superusers add a USB device of the host and take it back, on a running
VM too. The add form is loaded when the tab opens, as its choices read
every VM of the host; a hub, a device the host has its own disks or
network interfaces on, or one another VM names is not offered, with the
reason, and refused on the server under the compute's claim. A device is
chosen by model when the host has one of it, else by its address.
- A VM without a USB controller is refused; a device is taken from each
definition as that definition describes it.
- A clone gets none of the VM's host devices (the clone form says so), and
a VM with host devices is not migrated. A snapshot revert is refused when
it would give the VM a device another VM names or the host uses.
- A NIC that is a host device is no longer edited or removed from the
Network tab: the XML editor changes it.
- A named CPU model is written without check='none' and with
fallback='forbid': libvirt checks before the start that the host runs
it, and it is not swapped for another model.
- Mode maximum is written as that mode; it was written as a model named
maximum.
- Model names up to 64 characters: the -noTSX and -IBRS models, the ones a
mixed set of hosts needs, were refused at 20.
- The mode or model is checked against the host's capabilities when the VM
is defined, from the page and the API alike; no CPU element (QEMU's
oldest default CPU) is no longer offered.
- The default CPU mode setting offers the modes the new VM dialog has;
no-model and custom, which matched none of them, become host-model.
- A VM delete reads delete_disk and delete_nvram as booleans from a JSON
or form body. The view read them as HTML checkboxes from the form body
only: JSON {"delete_disk": true} kept the disks while reporting success,
and a form "delete_disk=false" deleted them. Refused options stop
nothing; the API schema names both options.
- Power on and power cycle of a template answer 409 instead of reporting a
start that did not happen.
- The VM details leave out the host's ISO images for non-superusers, as
the VM page does; reading them also refreshed every pool of the host.
- Flavors take values of at least 1, as the web form does, and show their
id for later changes; a migration needs neither live nor offline; a VM
create on an unknown compute answers 404 instead of 500.
Only external snapshots had their name checked. An internal one could be
taken with an empty name: libvirt named it, the job and its log row named
nothing, and a recovery looked for "" and marked the job failed though the
snapshot existed. Both kinds now pass the same check when queued, and the
internal form asks for a name as the external one does.
Snapshot dates showed no year, so last year's snapshot looked like this
year's in the list one reverts from; they now read 2026-10-13 23:04:00
under "Date (time zone)", as on the Jobs page.
Cloud images read their first-boot settings with cloud-init. The panel
served them only over HTTP, which a VM reaches only with the network
and a reverse DNS name for its address. A new VM can now carry them
itself: Cloud-init seed (Advanced) on the create form, or cloud_init in
the API.
The job writes a NoCloud seed, an ISO labelled cidata, into the disk's
directory pool as cidata-<uuid>.iso and puts it in the VM's CD-ROM
drive. Its meta-data holds the VM's UUID as instance-id and its name as
hostname, written as JSON so a VM named 123 or yes keeps a string
hostname; its user-data is what the HTTP datasource serves, with the
creating user's SSH keys. The ISO is built with pycdlib and written
through a libvirt stream, as the NVRAM copy is, now one helper for both.
A seed needs a CD-ROM bus and a directory pool, else the create is
refused. A failed create deletes the seed with the new disk, recovery
names one left behind, and deleting the VM with its disks deletes its
seed, found in the pools by name even when ejected. A clone's drive is
left empty: the seed is the source VM's identity.
Operations on a VM now write their rows the way the admin audit does: one
row per operation, done or failed with a safe reason, with the user, IP and
host. Each row names the VM ("VM web-1: delete snapshot snap1") and carries
its UUID in the new Logs.instance_uuid column.
- audit_vm and failed_vm wrap audit() and failed() for a VM. A failure the
view turns into a message is caught outside the block, so its failed row
is written; busy claims, permission and quota refusals and invalid input
write nothing. No password, key or XML goes into a row.
- All VM page operations move from addlogmsg to audit_vm, and addlogmsg
goes. QoS changes and defining a VM from XML are logged now; a gstfsd
error reply (root password, SSH key) is a failed row, not a done one.
- Partial results are rows of their own: the VM delete, then each disk
delete; the disk detach, then the volume delete; the migration, then a
failed autostart restore, NVRAM removal or record on the target.
- Migration rows use the compute name as the host column, as every other
row does.
- VM job rows (create, clone, snapshots) and their resolutions carry the
VM's UUID; snapshot job intents now record it. The owner rows of the VM
page and the accounts pages, and the ownership system rows, carry it too.
- The Logs tab loads vm_logs/<pk>/ and shows the rows with the VM's UUID,
so a rename keeps the history, two VMs with one name are told apart and
a VM on two computes is one VM. It gains a Result column. Rows from
before this change have no UUID and stay on the Logs page only.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The create page had three tabs (flavor, custom, template), each with its
own copy of the same create form; every flavor rendered one more copy in
a dialog, and fixes had to be made in each copy. All of them posted the
same form to the same job, differing only in where the disk comes from.
The page is now one form in sections: name and size, disk, networks and
an Advanced section. The disk section offers three sources as radio
cards (a new disk, existing volumes, a copy of a template); only the
chosen source's fields are shown, and the others are disabled, so they
are neither sent nor validated. A template's copy goes into the
template's pool unless another is picked. Flavors are presets that fill
vCPU, memory and disk size and pick a new disk; they are added and
deleted in a dialog outside the form. Every source uses the
per-interface network rows, so a new disk no longer requires a MAC:
libvirt gives an interface without one its address, as it did for the
other sources. A refused form comes back with its source, volumes,
template and networks, and the focus on its first error. Without a
storage pool or a network the page shows why instead of the form, and a
host that cannot be read is a message, not a 500.
The host dialog and the machine page share the form's look: hosts are
rows with their CPU and memory use, the machine page is a card with
Cancel/Next and the XML way is a collapsible section. All three steps
show the same step indicator, done steps linking back.
The create job refuses more than one disk source (the page sends one; a
crafted request could send two, and the job would have used the first).
A field with help text is described by its help and its error.
Frontend review fixes: the presets and the disclosure buttons show a
focus ring for keyboard users; a disclosure spans its card and its
chevron turns while open; a preset says it picks a new disk; numeric
fields bring a numeric keyboard and MAC fields no autocorrection; the
machine page's Next waits for a machine type. Tom Select's control
keeps the text colour of the select it replaces: its own fixed colour
made typed text invisible on dark Bootswatch themes, on every page that
uses it.
libvirt's backup copies the disks of a running or paused VM from one
instant into new volumes while it keeps running; the clone is defined
shut off as before. The VM is held for the copy, the copy can be
cancelled, and recovery reads the job's records and libvirt.
