No description
e16ade874d
This introduces a new way of doing local discovery: when tinc has local address information for the recipient node, it will send local discovery packets directly to the local address of that node, instead of using broadcast packets. This new way of doing local discovery provides numerous advantages compared to using broadcasts: - No broadcast packets "polluting" the local network; - Reliable even if the sending host has multiple network interfaces (in contrast, broadcasts will only be sent through one unpredictable interface) - Works even if the two hosts are not on the same broadcast domain. One example is a large LAN where the two hosts might be on different local subnets. In fact, thanks to UDP hole punching this might even work if there is a NAT sitting in the middle of the LAN between the two nodes! - Sometimes a node is reachable through its "normal" address, and via a local subnet as well. One might think the local subnet is the best route to the node in this case, but more often than not it's actually worse - one example is where the local segment is a third party VPN running in parallel, or ironically it can be the local segment formed by the tinc VPN itself! Because this new algorithm only checks the addresses for which an edge is already established, it is less likely to fall into these traps. |
||
|---|---|---|
| bash_completion.d | ||
| doc | ||
| gui | ||
| m4 | ||
| src | ||
| test | ||
| .gitignore | ||
| AUTHORS | ||
| configure.ac | ||
| COPYING | ||
| COPYING.README | ||
| Makefile.am | ||
| NEWS | ||
| README | ||
| README.android | ||
| README.git | ||
| THANKS | ||
This is the README file for tinc version 1.1pre10. Installation instructions may be found in the INSTALL file. tinc is Copyright (C) 1998-2014 by: Ivo Timmermans, Guus Sliepen <guus@tinc-vpn.org>, and others. For a complete list of authors see the AUTHORS file. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. See the file COPYING for more details. This is a pre-release --------------------- Please note that this is NOT a stable release. Until version 1.1.0 is released, please use one of the 1.0.x versions if you need a stable version of tinc. Although tinc 1.1 will be protocol compatible with tinc 1.0.x, the functionality of the tinc program may still change, and the control socket protocol is not fixed yet. Security statement ------------------ This version uses an experimental and unfinished cryptographic protocol. Use it at your own risk. Compatibility ------------- Version 1.1pre10 is compatible with 1.0pre8, 1.0 and later, but not with older versions of tinc. When the ExperimentalProtocol option is used, tinc is still compatible with 1.0.X and 1.1pre10 itself, but not with any other 1.1preX version. Requirements ------------ In order to compile tinc, you will need a GNU C compiler environment. Please ensure you have the latest stable versions of all the required libraries: - OpenSSL (http://www.openssl.org/) version 1.0.0 or later, with support for elliptic curve cryptography (ECC) and Galois counter mode (GCM) enabled. The following libraries are used by default, but can be disabled if necessary: - zlib (http://www.gzip.org/zlib/) - lzo (http://www.oberhumer.com/opensource/lzo/) - ncurses (http://invisible-island.net/ncurses/) - readline (ftp://ftp.gnu.org/pub/gnu/readline/) Features -------- Tinc is a peer-to-peer VPN daemon that supports VPNs with an arbitrary number of nodes. Instead of configuring tunnels, you give tinc the location and public key of a few nodes in the VPN. After making the initial connections to those nodes, tinc will learn about all other nodes on the VPN, and will make connections automatically. When direct connections are not possible, data will be forwarded by intermediate nodes. By default, nodes authenticate each other using 2048 bit RSA (or 521 bit ECDSA*) keys. Traffic is encrypted using Blowfish in CBC mode (or AES-256 in GCM mode*), authenticated using HMAC-SHA1 (or GCM*), and is protected against replay attacks. *) When using the ExperimentalProtocol option. Tinc fully supports IPv6. Tinc can operate in several routing modes. In the default mode, "router", every node is associated with one or more IPv4 and/or IPv6 Subnets. The other two modes, "switch" and "hub", let the tinc daemons work together to form a virtual Ethernet network switch or hub. Normally, when started tinc will detach and run in the background. In a native Windows environment this means tinc will intall itself as a service, which will restart after reboots. To prevent tinc from detaching or running as a service, use the -D option. The status of the VPN can be queried using the "tinc" command, which connects to a running tinc daemon via a control connection. The same tool also makes it easy to start and stop tinc, and to change its configuration.