No description
daf65919d1
In this commit, if a node receives a REQ_PUBKEY message from a node it doesn't have the key for, it will send a REQ_PUBKEY message in return *before* sending its own key. The rationale is to prevent delays when establishing communication between two nodes that see each other for the first time. These delays are caused by the first SPTPS packet being dropped on the floor, as shown in the following typical exchange: node1: No Ed25519 key known for node2 REQ_PUBKEY -> <- ANS_PUBKEY node1: Learned Ed25519 public key from node2 REQ_SPTPS_START -> node2: No Ed25519 key known for zyklos <- REQ_PUBKEY ANS_PUBKEY -> node2: Learned Ed25519 public key from node1 -- 10-second delay -- node1: No key from node2 after 10 seconds, restarting SPTPS REQ_SPTPS_START -> <- SPTPS -> node1: SPTPS key exchange with node2 succesful node2: SPTPS key exchange with node1 succesful With this patch, the following happens instead: node1: No Ed25519 key known for node2 REQ_PUBKEY -> node2: Preemptively requesting Ed25519 key for node1 <- REQ_PUBKEY <- ANS_PUBKEY ANS_PUBKEY -> node2: Learned Ed25519 public key from node1 node1: Learned Ed25519 public key from node2 REQ_SPTPS_START -> <- SPTPS -> node1: SPTPS key exchange with node2 succesful node2: SPTPS key exchange with node1 succesful |
||
|---|---|---|
| bash_completion.d | ||
| doc | ||
| gui | ||
| m4 | ||
| src | ||
| test | ||
| .gitignore | ||
| AUTHORS | ||
| configure.ac | ||
| COPYING | ||
| COPYING.README | ||
| Makefile.am | ||
| NEWS | ||
| README | ||
| README.android | ||
| README.git | ||
| THANKS | ||
This is the README file for tinc version 1.1pre10. Installation instructions may be found in the INSTALL file. tinc is Copyright (C) 1998-2014 by: Ivo Timmermans, Guus Sliepen <guus@tinc-vpn.org>, and others. For a complete list of authors see the AUTHORS file. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. See the file COPYING for more details. This is a pre-release --------------------- Please note that this is NOT a stable release. Until version 1.1.0 is released, please use one of the 1.0.x versions if you need a stable version of tinc. Although tinc 1.1 will be protocol compatible with tinc 1.0.x, the functionality of the tinc program may still change, and the control socket protocol is not fixed yet. Security statement ------------------ This version uses an experimental and unfinished cryptographic protocol. Use it at your own risk. Compatibility ------------- Version 1.1pre10 is compatible with 1.0pre8, 1.0 and later, but not with older versions of tinc. When the ExperimentalProtocol option is used, tinc is still compatible with 1.0.X and 1.1pre10 itself, but not with any other 1.1preX version. Requirements ------------ In order to compile tinc, you will need a GNU C compiler environment. Please ensure you have the latest stable versions of all the required libraries: - OpenSSL (http://www.openssl.org/) version 1.0.0 or later, with support for elliptic curve cryptography (ECC) and Galois counter mode (GCM) enabled. The following libraries are used by default, but can be disabled if necessary: - zlib (http://www.gzip.org/zlib/) - lzo (http://www.oberhumer.com/opensource/lzo/) - ncurses (http://invisible-island.net/ncurses/) - readline (ftp://ftp.gnu.org/pub/gnu/readline/) Features -------- Tinc is a peer-to-peer VPN daemon that supports VPNs with an arbitrary number of nodes. Instead of configuring tunnels, you give tinc the location and public key of a few nodes in the VPN. After making the initial connections to those nodes, tinc will learn about all other nodes on the VPN, and will make connections automatically. When direct connections are not possible, data will be forwarded by intermediate nodes. By default, nodes authenticate each other using 2048 bit RSA (or 521 bit ECDSA*) keys. Traffic is encrypted using Blowfish in CBC mode (or AES-256 in GCM mode*), authenticated using HMAC-SHA1 (or GCM*), and is protected against replay attacks. *) When using the ExperimentalProtocol option. Tinc fully supports IPv6. Tinc can operate in several routing modes. In the default mode, "router", every node is associated with one or more IPv4 and/or IPv6 Subnets. The other two modes, "switch" and "hub", let the tinc daemons work together to form a virtual Ethernet network switch or hub. Normally, when started tinc will detach and run in the background. In a native Windows environment this means tinc will intall itself as a service, which will restart after reboots. To prevent tinc from detaching or running as a service, use the -D option. The status of the VPN can be queried using the "tinc" command, which connects to a running tinc daemon via a control connection. The same tool also makes it easy to start and stop tinc, and to change its configuration.