The option "--disable-legacy-protocol" was added to the configure
script. The new protocol does not depend on any external crypto
libraries, so when the option is used tinc is no longer linked to
OpenSSL's libcrypto.
The only places where connection_t::status.active is modified is in
ack_h() and terminate_connection(). In both cases, connection_t::edge
is added and removed at the same time, and that's the only places
connection_t::edge is set. Therefore, the following is true at all
times:
!c->status.active == !c->edge
This commit removes the redundant state information by getting rid of
connection_t::status.active, and using connection_t::edge instead.
Commit 86a99c6b99 changed the way we
handle connection events to protect against spurious event loop
callbacks. Unfortunately, it turns out that calling connect() twice on
the same socket results in different behaviors depending on the platform
(even though it seems well defined in POSIX). On Windows this resulted
in the connection handling code being unable to react to connection
errors (such as connection refused), always hitting the timeout; on
Linux this resulted in spurious error messages about connect() returning
success.
In POSIX and on Linux, using connect() on a socket where the previous
attempt failed will attempt to connect again, resulting in unnecessary
network activity. Using getsockopt(SO_ERROR) before connect() solves
that, but introduces a race condition if a connection failure happens
between the two calls.
For this reason, this commit switches from connect() to a zero-sized
send() call, which is more consistent (though not completely, see the
truth table in the comments) and simpler to use for that purpose. Note
that Windows explictly support empty send() calls; POSIX says nothing
on the subject, but testing shows it works at least on Linux.
(Surprisingly enough, Windows seems more POSIX-compliant than Linux on
this one!)
The event loop does not guarantee that spurious write I/O events do not
happen; in fact, they are guaranteed to happen on Windows when
event_flush_output() is called. Because handle_meta_io() does not check
for spurious events, a metaconnection socket might appear connected even
though it's not, and will fail immediately when sending the ID request.
This commit fixes this issue by making handle_meta_io() check the
connection status before assuming the socket is connected. It seems that
the only reliable way to do that is to try to call connect() again and
look at the error code, which will be EISCONN if the socket is
connected, or EALREADY if it's not.
When using socket functions, "sockerrno" is supposed to be used to
retrieve the error code as opposed to "errno", so that it is translated
to the correct call on Windows (WSAGetLastError() - Windows does not
update errno on socket errors). Unfortunately, the use of sockerrno is
inconsistent throughout the tinc codebase, as errno is often used
incorrectly on socket-related calls.
This commit fixes these oversights, which improves socket error
handling on Windows.
Before, when making a meta-connection to a node (either because of a ConnectTo
or because AutoConnect is set), tinc required one or more Address statements
in the corresponding host config file. However, tinc learns addresses from
other nodes that it uses for UDP connections. We can use those just as well for
TCP connections.
ListenAddress works the same as BindToAddress, except that from now on,
explicitly binding outgoing packets to the address of a socket is only done for
sockets specified with BindToAddress.
The restriction of accepting only 1 connection per second from a single address
is a bit too much, especially if one wants to join a VPN using an invitation,
which requires two connections.
Commit cff5a84 removed the feature of binding outgoing TCP sockets to a local
address. We now call bind() again, but only if there is exactly one listening
socket with the same address family as the destination address of the outgoing
socket.
Tinc now strictly limits incoming connections from the same host to 1 per
second. For incoming connections from multiple hosts short bursts of incoming
connections are allowed (by default 100), but on average also only 1 connection
per second is allowed.
When an incoming connection exceeds the limit, tinc will keep the connection in
a tarpit; the connection will be kept open but it is ignored completely. Only
one connection is in a tarpit at a time to limit the number of useless open
connections.
We were checking only for readability, which is not a problem for normal
connections, since the server side of a connection will always send an ID
request. But when using a proxy, the proxy server doesn't send anything before
the client, so tinc would not see that its connection to the proxy had already
been established.
There are several reasons for this:
- MacOS/X doesn't support polling the tap device using kqueue, requiring a
workaround to fall back to select().
- On Windows only sockets are properly handled, therefore tinc uses a second
thread that does a blocking ReadFile() on the TAP-Win32/64 device. However,
this does not mix well with libevent.
- Libevent, event just the core, is quite large, and although it is easy to get
and install on many platforms, it can be a burden.
- Libev is more lightweight and seems technically superior, but it doesn't
abstract away all the platform differences (for example, async events are not
supported on Windows).
The tree functions were never used on the connection_tree, a list is more appropriate.
Also be more paranoid about connections disappearing while traversing the list.
Struct outgoing_ts and connection_ts were depending too much on each other,
causing lots of problems, especially the reuse of a connection_t. Now, whenever
a connection is closed it is immediately removed from the list of connections
and destroyed.
Proxy type "exec" can be used to have an external script or binary set
up an outgoing connection. Standard input and output will be used to
exchange data with the external command. The variables REMOTEADDRESS and
REMOTEPORT are set to the intended destination address and port.
When the Proxy option is used, outgoing connections will be made via the
specified proxy. There is no support for authentication methods or for having
the proxy forward incoming connections, and there is no attempt to proxy UDP.
This allows tincctl to receive log messages from a running tincd,
independent of what is logged to syslog or to file. Tincctl can receive
debug messages with an arbitrary level.
The code introduced in commit 41a05f59ba is not
needed anymore, since tinc has been able to handle UDP packets from a different
source address than those of the TCP packets since 1.0.10. When using multiple
BindToAddress statements, this code does not make sense anymore, we do want the
kernel to choose the source address on its own.
Scripts called by tinc would inherit its open filedescriptors. This could
be a problem if other long-running daemons are started from those scripts,
if those daemons would not close all filedescriptors before going into the
background.
Problem found and solution suggested by Nick Hibma.
