This gets rid of xasprintf() in a number of places, and removes the need
to free() the temporary strings. A few potential memory leaks have been
fixed.
,
# especially if it merges an updated upstream into a topic branch.
#
# Lines starting with '#' will be ignored, and an empty message aborts
# the commit.
read_rsa_public_key() was bailing out early if the given node already has an Ed25519 key, and
returned true even though c->rsa was NULL. The early bailout code isn't necessary anymore, so just
remove it.
Unfortunately, glibc assumes that /etc/resolv.conf is a static file that
never changes. Even on servers, /etc/resolv.conf might be a dynamically
generated file, and we never know when it changes. So just call
res_init() every time, so glibc uses up-to-date nameserver information.
Conflicts:
src/have.h
src/net.c
src/net_setup.c
Average RTT can be used to update edge weight and propagate it to the network.
tinc dump edges has been also extended to give the current RTT.
New edge weight will change only if the config has EdgeUpdateInterval set to other value than 0.
- Ignore local configuration for editors
- Extended manpage with informations about EdgeUpdateInterval
- Added clone_edge and fixed potential segfault when b->from not defined
- Compute avg_rtt based on the time values we got back in PONG
- Add avg_rtt on dump edge
- Send current time on PING and return it on PONG
- Changed last_ping_time to struct timeval
- Extended edge_t with avg_rtt
It may not be obvious, but due to the way tinc operates (single-threaded
control loop with no intermediate packet buffer), UDP send and receive
buffers can have a massive impact on performance. It is therefore of
paramount importance that the buffers be large enough to prevent packet
drops that could occur while tinc is processing a packet.
Leaving that value to the OS default could be reasonable if we weren't
relying on it so much. Instead, this makes performance somewhat
unpredictable.
In practice, the worst case scenario occurs on Windows, where Microsoft
had the brillant idea of making the buffers 8K in size by default, no
matter what the link speed is. Considering that 8K flies past in a
matter of microseconds on >1G links, this is extremely inappropriate. On
these systems, changing the buffer size to 1M results in *obscene*
raw throughput improvements; I have observed a 10X jump from 40 Mbit/s
to 400 Mbit/s on my system.
In this commit, we stop trusting the OS to get this right and we use a
fixed 1M value instead, which should be enough for <=1G links.
HAVE_DECL_RES_INIT is generated using AC_CHECK_DECLS. tinc checks this
symbol using #ifdef, which is wrong because (according to autoconf docs)
the symbol is always defined, it's just set to zero if the check failed.
This broke the Windows build starting from
0b310bf406, because it introduced this
conditional in code that's not excluded from the Windows build.
This makes sure MTU_INFO messages are only sent at the maximum rate of
5 per second (by default). As usual with these "probe" mechanisms, the
rate of these messages cannot be higher than the rate of data packets
themselves, since they are sent from the RX path.
This makes sure UDP_INFO messages are only sent at the maximum rate of
5 per second (by default). As usual with these "probe" mechanisms, the
rate of these messages cannot be higher than the rate of data packets
themselves, since they are sent from the RX path.
Unfortunately, glibc assumes that /etc/resolv.conf is a static file that
never changes. Even on servers, /etc/resolv.conf might be a dynamically
generated file, and we never know when it changes. So just call
res_init() every time, so glibc uses up-to-date nameserver information.
In tinc 1.0.x, this was tracked in node->inkey, however in tinc 1.1 we have an abstraction layer for
the legacy cipher and digest, and we don't keep an explicit copy of the key around. We cannot use
cipher_active() or digest_active(), since it is possible to set both to the null algorithm. So add a bit to
node_status_t.
This introduces a new configuration option,
UDPDiscoveryKeepaliveInterval, which is used as the UDP discovery
interval once the UDP tunnel is established. The pre-existing option,
UDPDiscoveryInterval, is therefore only used before UDP connectivity
is established.
The defaults are set so that tinc sends UDP pings more aggressively
if the tunnel is not established yet. This is appropriate since the
size of probes in that scenario is very small (16 bytes).
This adds a new mechanism by which tinc can determine if a node is
reachable via UDP. The new mechanism is currently redundant with the
PMTU discovery mechanism - that will be fixed in a future commit.
Conceptually, the UDP discovery mechanism works similarly to PMTU
discovery: it sends UDP probes (of minmtu size, to make sure the tunnel
is fully usable), and assumes UDP is usable if it gets replies. It
assumes UDP is broken if too much time has passed since the last reply.
The big difference with the current PMTU discovery mechanism, however,
is that UDP discovery probes are only triggered as part of the
packet TX path (through try_tx()). This is quite interesting, because
it means tinc will never send UDP pings more often than normal packets,
and most importantly, it will automatically stop sending pings as soon
as packets stop flowing, thereby nicely reducing network chatter.
Of course, there are small drawbacks in some edge cases: for example,
if a node only sends one packet every minute to another node, these
packets will only be sent over TCP, because the interval between packets
is too long for tinc to maintain the UDP tunnel. I consider this a
feature, not a bug: I believe it is appropriate to use TCP in scenarios
where traffic is negligible, so that we don't pollute the network with
pings just to maintain a UDP tunnel that's seeing negligible usage.
The option "--disable-legacy-protocol" was added to the configure
script. The new protocol does not depend on any external crypto
libraries, so when the option is used tinc is no longer linked to
OpenSSL's libcrypto.
Setting the Port configuration variable to zero can be used to make tinc
listen on a system-assigned port. Unfortunately, in this scenario myport
will be zero, which means that tinc won't transmit its actual UDP
listening port to other nodes. This breaks UDP hole punching and local
discovery.
This adds a new option, BroadcastSubnet, that allows the user to
declare broadcast subnets, i.e. subnets which are considered broadcast
addresses by the tinc routing layer. Previously only the global IPv4
and IPv6 broadcast addresses were supported by virtue of being
hardcoded.
This is useful when using tinc in router mode with Ethernet virtual
devices, as it can be used to provide broadcast support for a local
broadcast address (e.g. 10.42.255.255) instead of just the global
address (255.255.255.255).
This is implemented by removing hardcoded broadcast addresses and
introducing "broadcast subnets", which are subnets with a NULL owner.
By default, behavior is unchanged; this is accomplished by adding
the global broadcast addresses for Ethernet, IPv4 and IPv6 at start
time.
The new local address based local discovery mechanism is technically
superior to the old broadcast-based one. In fact, the old algorithm
can technically make things worse by e.g. sending broadcasts over the
VPN itself and then selecting the VPN address as the node's UDP
address. This cannot happen with the new mechanism.
Note that this means old nodes that don't send their local addresses in
ADD_EDGE messages can't be discovered, because there is no address to
send discovery packets to. Old nodes can still discover new nodes by
sending them broadcasts, though.
When using socket functions, "sockerrno" is supposed to be used to
retrieve the error code as opposed to "errno", so that it is translated
to the correct call on Windows (WSAGetLastError() - Windows does not
update errno on socket errors). Unfortunately, the use of sockerrno is
inconsistent throughout the tinc codebase, as errno is often used
incorrectly on socket-related calls.
This commit fixes these oversights, which improves socket error
handling on Windows.
Besides controlling when tinc-up and tinc-down get called, this commit makes
DeviceStandby control when the virtual network interface "cable" is "plugged"
on Windows. This is more user-friendly as the status of the tinc network can
be seen just by looking at the state of the network interface, and it makes
Windows behave better when isolated.
This adds a new DeviceStandby option; when it is disabled (the default),
behavior is unchanged. If it is enabled, tinc-up will not be called during
tinc initialization, but will instead be deferred until the first node is
reachable, and it will be closed as soon as no nodes are reachable.
This is useful because it means the device won't be set up until we are fairly
sure there is something listening on the other side. This is more user-friendly,
as one can check on the status of the tinc network connection just by checking
the status of the network interface. Besides, it prevents the OS from thinking
it is connected to some network when it is in fact completely isolated.
ListenAddress works the same as BindToAddress, except that from now on,
explicitly binding outgoing packets to the address of a socket is only done for
sockets specified with BindToAddress.
If the Port statement is not used, there are two other ways to let tinc listen
on a non-default port: either by specifying one or more BindToAddress
statements including port numbers, or by starting it from systemd with socket
activation. Tinc announces its own port to other nodes, but before it only
announced what was set using the Port statement.
It seems like a lot of overhead to call access() for every possible extension
defined in PATHEXT, but apparently this is what Windows does itself too. At
least this avoids calling system() when the script one is looking for does not
exist at all.
Since the tinc utility also needs to call scripts, execute_script() is now
split off into its own source file.
The order in which tinc initialized things was not completely correct. Now, it
is done as follows:
- Load and parse configuration files.
- Create all TCP and UDP listening sockets.
- Create PID file and UNIX socket.
- Run the tinc-up script.
- Drop privileges.
- Start outgoing connections.
- Run the main loop.
The PID file can only be created correctly if the listening sockets have been
set up ,as it includes the address and port of the first listening socket. The
tinc-up script has to be run after the PID file and UNIX socket have been
created so it can change their permissions if necessary. Outgoing connections
should only be started right before the main loop, because this is not really
part of the initialization.
The PID file was created before tinc-up was called, but the UNIX socket was
created afterwards, which meant one could not change the UNIX socket's owner or
permissions from the tinc-up script.
As mentioned by Erik Tews, calling fchmod() after fopen() leaves a small window
for exploits. As long as tinc is single-threaded, we can use umask() instead to
reduce file permissions. This also works when creating the AF_UNIX control socket.
The umask of the user running tinc(d) is used for most files, except for the
private keys, invitation files, PID file and control socket.
Tinc now strictly limits incoming connections from the same host to 1 per
second. For incoming connections from multiple hosts short bursts of incoming
connections are allowed (by default 100), but on average also only 1 connection
per second is allowed.
When an incoming connection exceeds the limit, tinc will keep the connection in
a tarpit; the connection will be kept open but it is ignored completely. Only
one connection is in a tarpit at a time to limit the number of useless open
connections.
