mirror of
https://github.com/jialexd/sdk-ameba-v4.0c_180328.git
synced 2024-11-23 14:34:18 +00:00
481 lines
18 KiB
C
Executable file
481 lines
18 KiB
C
Executable file
/**
|
|
******************************************************************************
|
|
* @file rtl8710b_usb.h
|
|
* @author
|
|
* @version V1.0.0
|
|
* @date 2016-05-17
|
|
* @brief This file contains all the functions prototypes for the USOC firmware
|
|
* library.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* This module is a confidential and proprietary property of RealTek and
|
|
* possession or use of this module requires written permission of RealTek.
|
|
*
|
|
* Copyright(c) 2016, Realtek Semiconductor Corporation. All rights reserved.
|
|
******************************************************************************
|
|
*/
|
|
|
|
#ifndef _RTL8710B_USOC_H_
|
|
#define _RTL8710B_USOC_H_
|
|
|
|
/** @addtogroup AmebaZ_Periph_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup USOC
|
|
* @brief USOC driver modules
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup USOC
|
|
* @verbatim
|
|
*****************************************************************************************
|
|
* Introduction
|
|
*****************************************************************************************
|
|
* USOC:
|
|
* - Base Address: USOC_REG
|
|
* - Clock domains: USOC domain use 62.5M divided by system clock. SIE domain uses 30M UTMI clock
|
|
* - DMA: use descriptor ring, default ring size is 8
|
|
* - IRQ: USB_IRQ
|
|
* - Interrupt mitigation
|
|
* - Error handling
|
|
*
|
|
*****************************************************************************************
|
|
* How to use USOC in iNIC mode
|
|
*****************************************************************************************
|
|
* To use the USOC in iNIC mode, the following steps are mandatory:
|
|
*
|
|
* 1. USOC power on using USOC_POWER_On().
|
|
*
|
|
* 2. Init TXBD and RXBD
|
|
*
|
|
* 3. Disable USOC using USOC_Cmd(USOC_REG, DISABLE).
|
|
*
|
|
* 4. Config USOC work mode using USOC_MODE_Cfg(USOC_REG, USB_INIC_MODE).
|
|
*
|
|
* 5. Call USOC_Init(USOC_REG, &USOCInit_Struct) to configure USOC register with the
|
|
* corresponding configuration.
|
|
*
|
|
* 6. To configure interrupts using USOC_INTCfg() function.
|
|
*
|
|
* 7. Activate the USOC peripheral using USOC_Cmd(USOC_REG, ENABLE) function
|
|
*
|
|
*****************************************************************************************
|
|
* How to use USOC in dongle mode
|
|
*****************************************************************************************
|
|
* To use USOC dongle mode, the following steps are mandatory:
|
|
*
|
|
* 1. Enable WL clock and Lx Bus.
|
|
*
|
|
* 2. USOC power on using USOC_POWER_On().
|
|
*
|
|
* 3. Disable USOC using USOC_Cmd(USOC_REG, DISABLE).
|
|
*
|
|
* 4. Open register(WLON) access channel using USOC_CH_Cmd(USOC_REG, USOC_CH2, ENABLE).
|
|
*
|
|
* 5. Config USOC work mode using USOC_MODE_Cfg(USOC_REG, USB_DONGLE_MODE).
|
|
*
|
|
* @note All other functions can be used separately to modify, if needed,
|
|
* a specific feature of the USOC
|
|
*
|
|
*****************************************************************************************
|
|
* @endverbatim
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
|
|
/** @defgroup USOC_Exported_Types USOC Exported Types
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief USOC Init structure definition
|
|
*/
|
|
typedef struct {
|
|
/* TXBD */
|
|
u32 TXBD_BAR; /*!< Specifies TXBD base address */
|
|
|
|
u32 TXBD_RING_SIZE; /*!< Specifies TXBD ring size
|
|
This parameter must be set to a value in the 0-32 range. */
|
|
|
|
u32 TX_BUFFER_SIZE; /*!< Specifies TX buffer size
|
|
In iNIC mode, this parameter must be set to a value in the 0-1536 range. */
|
|
|
|
u32 TX_BLK_SIZE; /*!< Specifies AHB TX block size
|
|
This parameter must be set to a value in the 0-15 range. */
|
|
|
|
u32 TX_MIT_TIME; /*!< Specifies TX time mitigation
|
|
This parameter must be set to a value in the 0-65535 range. */
|
|
|
|
u32 TX_MIT_PKT_CNT; /*!< Specifies TX packet count mitigation
|
|
This parameter must be set to a value in the 0-63 range. */
|
|
|
|
/* RXBD */
|
|
u32 RXBD_BAR; /*!< Specifies RXBD base address */
|
|
|
|
u32 RXBD_RING_SIZE; /*!< Specifies RXBD ring size
|
|
This parameter must be set to a value in the 0-32 range. */
|
|
|
|
u32 RX_BUFFER_SIZE; /*!< Specifies RX buffer size
|
|
In iNIC mode, this parameter must be set to a value in the 0-1536 range. */
|
|
|
|
u32 RX_BLK_SIZE; /*!< Specifies AHB RX block size
|
|
This parameter must be set to a value in the 0-15 range. */
|
|
|
|
u32 RX_MIT_TIME; /*!< Specifies RX time mitigation
|
|
This parameter must be set to a value in the 0-65535 range. */
|
|
|
|
u32 RX_MIT_PKT_CNT; /*!< Specifies RX packet count mitigation
|
|
This parameter must be set to a value in the 0-63 range. */
|
|
} USOC_InitTypeDef;
|
|
|
|
/**
|
|
* @brief USOC TXBD structure definition
|
|
*/
|
|
typedef struct {
|
|
u32 pktSize:14; /*!< bit[0:13], specifies tx packet size */
|
|
|
|
u32 status:2; /*!< bit[14:15], specifies the txbd status
|
|
This parameter can be set to 00(init), or 01(ready), or 10(ok), or 11(err) */
|
|
|
|
u32 seqNum:16; /*!< bit[16:31], specifies txbd sequence number */
|
|
|
|
u32 address; /*!< Specifies the TX buffer physical address
|
|
@note This parameter must be 64-bytes aligned */
|
|
}USOC_TX_BD, *PUSOC_TX_BD;
|
|
|
|
/**
|
|
* @brief USOC RXBD structure definition
|
|
*/
|
|
typedef struct {
|
|
u32 pktSize:14; /*!< bit[0:13], specifies rx packet size */
|
|
|
|
u32 status:2; /*!< bit[14:15], specifies the rxbd status
|
|
This parameter can be set to 00(init), or 01(ready), or 10(ok), or 11(err) */
|
|
|
|
u32 seqNum:16; /*!< bit[16:31], specifies rxbd sequence number */
|
|
|
|
u32 address; /*!< Specifies the RX buffer physical address
|
|
@note This parameter must be 64-bytes aligned */
|
|
} USOC_RX_BD, *PUSOC_RX_BD;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
|
|
/** @defgroup USOC_Exported_Constants USOC Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup USOC_TXBD_definitions The TX Buffer Descriptor format
|
|
* @{
|
|
*/
|
|
#define TXBD_STAT_INIT 0
|
|
#define TXBD_STAT_RDY 1
|
|
#define TXBD_STAT_OK 2
|
|
#define TXBD_STAT_ERR 3
|
|
|
|
#define USOC_TXBD_SIZE 8
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USOC_RXBD_definitions The RX Buffer Descriptor format
|
|
* @{
|
|
*/
|
|
#define RXBD_STAT_INIT 0
|
|
#define RXBD_STAT_RDY 1
|
|
#define RXBD_STAT_OK 2
|
|
#define RXBD_STAT_ERR 3
|
|
|
|
#define USOC_RXBD_SIZE 8
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USOC_Mode_definitions
|
|
* @{
|
|
*/
|
|
#define USB_INIC_MODE 0 /*!< INIC */
|
|
#define USB_DONGLE_MODE 1 /*!< WIFI dongle mode */
|
|
#define USB_AINST_MODE 2 /*!< AUTO install */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USOC_Chan_definitions
|
|
* @{
|
|
*/
|
|
#define USOC_CH0 0 /*!< iTDE */
|
|
#define USOC_CH1 1 /*!< iRDE */
|
|
#define USOC_CH2 2 /*!< iREG */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USOC_TX_Ring_definitions
|
|
* @{
|
|
*/
|
|
#define USOC_TXBD_RING_SIZE 8
|
|
#define USOC_TX_BUFFER_SIZE 1536
|
|
#define USOC_TX_BLK_SIZE 6
|
|
#define USOC_TX_BUFFER_SIZE_ALIGN (USOC_TX_BUFFER_SIZE+(1 << USOC_TX_BLK_SIZE))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USOC_RX_Ring_definitions
|
|
* @{
|
|
*/
|
|
#define USOC_RXBD_RING_SIZE 8
|
|
#define USOC_RX_BUFFER_SIZE 1536
|
|
#define USOC_RX_BLK_SIZE 6
|
|
#define USOC_RX_BUFFER_SIZE_ALIGN (USOC_RX_BUFFER_SIZE+(1 << USOC_RX_BLK_SIZE))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USOC_INTR_MIT_definitions
|
|
* @{
|
|
*/
|
|
#define USOC_INTR_TX_MIT_TIME 625
|
|
#define USOC_INTR_RX_MIT_TIME 625
|
|
#define USOC_INTR_TX_MIT_PKT_CNT 4
|
|
#define USOC_INTR_RX_MIT_PKT_CNT 4
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USOC_STUCK_TIME_definitions
|
|
* @{
|
|
*/
|
|
#define USOC_TX_STUCK_TIME 4096/*!< Specifies TX DMA stuck time, must be set to a value in the 0-65535 range. */
|
|
#define USOC_RX_STUCK_TIME 4096/*!< Specifies RX DMA stuck time, must be set to a value in the 0-65535 range. */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USOC_Exported_Functions USOC Exported Functions
|
|
* @{
|
|
*/
|
|
_LONG_CALL_ VOID USOC_Cmd(USOC_REG_TypeDef * usoc_reg, u32 NewStatus);
|
|
_LONG_CALL_ VOID USOC_PHY_Cmd(USOC_REG_TypeDef * usoc_reg, u32 NewStatus);
|
|
_LONG_CALL_ VOID USOC_MODE_Cfg(USOC_REG_TypeDef * usoc_reg, u32 mode);
|
|
_LONG_CALL_ VOID USOC_TXBD_SWIDX_Cfg(USOC_REG_TypeDef * usoc_reg, u32 index);
|
|
_LONG_CALL_ u32 USOC_TXBD_SWIDX_Get(USOC_REG_TypeDef * usoc_reg);
|
|
_LONG_CALL_ VOID USOC_RXBD_SWIDX_Cfg(USOC_REG_TypeDef * usoc_reg, u32 index);
|
|
_LONG_CALL_ u32 USOC_RXBD_SWIDX_Get(USOC_REG_TypeDef * usoc_reg);
|
|
_LONG_CALL_ u32 USOC_TXBD_HWIDX_Get(USOC_REG_TypeDef * usoc_reg);
|
|
_LONG_CALL_ u32 USOC_RXBD_HWIDX_Get(USOC_REG_TypeDef * usoc_reg);
|
|
_LONG_CALL_ VOID USOC_INTCfg(USOC_REG_TypeDef * usoc_reg, u32 mask);
|
|
_LONG_CALL_ VOID USOC_INTClr(USOC_REG_TypeDef * usoc_reg, u32 mask);
|
|
_LONG_CALL_ u32 USOC_INTGet(USOC_REG_TypeDef * usoc_reg);
|
|
_LONG_CALL_ VOID USOC_StructInit(USOC_InitTypeDef* USOCInit_Struct);
|
|
_LONG_CALL_ VOID USOC_Init(USOC_REG_TypeDef * usoc_reg, USOC_InitTypeDef* USOCInit_Struct);
|
|
_LONG_CALL_ VOID USOC_POWER_On(VOID);
|
|
_LONG_CALL_ VOID USOC_CH_Cmd(USOC_REG_TypeDef * usoc_reg, u32 ch, u32 NewStatus);
|
|
_LONG_CALL_ VOID USOC_SW_RST(USOC_REG_TypeDef * usoc_reg);
|
|
_LONG_CALL_ VOID USOC_TXSTUCK_Cfg(USOC_REG_TypeDef * usoc_reg, u32 NewStatus, u32 TVal);
|
|
_LONG_CALL_ VOID USOC_RXSTUCK_Cfg(USOC_REG_TypeDef * usoc_reg, u32 NewStatus, u32 RVal);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Registers Definitions --------------------------------------------------------*/
|
|
/**************************************************************************//**
|
|
* @defgroup USOC_Register_Definitions USOC Register Definitions
|
|
* @{
|
|
*****************************************************************************/
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup REG_USOC_CR
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_CR_INIC_MODE_EN ((u32)0x00000001 << 0) /*!< enable inic mode(usoc) */
|
|
#define BIT_CR_AUTO_LOAD_DONE ((u32)0x00000001 << 1) /*!< indicate SIE autoload done. HW autoclear. */
|
|
#define BIT_CR_USB_RF_EN ((u32)0x00000001 << 2) /*!< CM4 read SIE EN */
|
|
#define BIT_CR_USB_PHY_EN ((u32)0x00000001 << 3) /*!< enable USB PHY */
|
|
#define BIT_CR_SIE_RERUN ((u32)0x00000001 << 4) /*!< Rerun USB SIE. HW autoclear. */
|
|
#define BIT_CR_WLAN_USB_EN ((u32)0x00000001 << 5) /*!< enable SIE dongle mode */
|
|
#define BIT_CR_INIC_USB_EN ((u32)0x00000001 << 6) /*!< enable SIE iNIC mode */
|
|
#define BIT_CR_AINST_USB_EN ((u32)0x00000001 << 7) /*!< enable SIE autoinstall mode */
|
|
#define BIT_CR_USB1D1_EN ((u32)0x00000001 << 8) /*!< enable SIE USB 1.1 */
|
|
#define BIT_CR_RST_SIE_TX ((u32)0x00000001 << 9) /*!< SIE TX software reset. Active low. */
|
|
#define BIT_CR_RST_SIE_RX ((u32)0x00000001 << 10) /*!< SIE RX software reset. Active low. */
|
|
#define BIT_CR_SIE_LOAD_FAIL ((u32)0x00000001 << 11) /*!< SIE autoload fail */
|
|
/** @} */
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup CLK_RST_CTRL
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_RST_ITDE ((u32)0x00000001 << 24)
|
|
#define BIT_RST_IRDE ((u32)0x00000001 << 25)
|
|
#define BIT_RST_TX_HW_IDX ((u32)0x00000001 << 26)
|
|
#define BIT_RST_RX_HW_IDX ((u32)0x00000001 << 27)
|
|
#define BIT_RST_TX_IF ((u32)0x00000001 << 28)
|
|
#define BIT_RST_RX_IF ((u32)0x00000001 << 29)
|
|
#define BIT_RST_AHB_AUX ((u32)0x00000001 << 30)
|
|
#define BIT_RST_UTMI_AUX ((u32)0x00000001 << 31)
|
|
|
|
#define USOC_SW_RST_MASK (BIT_RST_ITDE | BIT_RST_IRDE | \
|
|
BIT_RST_TX_HW_IDX | BIT_RST_RX_HW_IDX | \
|
|
BIT_RST_TX_IF | BIT_RST_RX_IF | \
|
|
BIT_RST_UTMI_AUX)
|
|
/** @} */
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup CHANN_CTRL
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_PRI_CH0_CFG ((u32)0x00000007 << 0)
|
|
#define BIT_PRI_CH1_CFG ((u32)0x00000007 << 4)
|
|
#define BIT_PRI_CH2_CFG ((u32)0x00000007 << 8)
|
|
|
|
#define BIT_EN_CH0 ((u32)0x00000001 << 3) /*!< enable iTDE */
|
|
#define BIT_EN_CH1 ((u32)0x00000001 << 7) /*!< enable iRDE */
|
|
#define BIT_EN_CH2 ((u32)0x00000001 << 11) /*!< enable iREG */
|
|
|
|
#define BIT_TX_BLK_SZ_CFG(x) ((u32)((x) & 0x0000000f) << 16)
|
|
#define BIT_RX_BLK_SZ_CFG(x) ((u32)((x) & 0x0000000f) << 20)
|
|
/** @} */
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup BUFFER_SIZE
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_TXBUF_SIZE_CFG(x) ((u32)((x) & 0x00000fff) << 0)
|
|
#define BIT_RXBUF_SIZE_CFG(x) ((u32)((x) & 0x00000fff) << 16)
|
|
/** @} */
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup RING_SIZE
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_TXBD_RING_SZ_CFG(x) ((u32)((x) & 0x000000ff) << 0)
|
|
#define BIT_RXBD_RING_SZ_CFG(x) ((u32)((x) & 0x000000ff) << 8)
|
|
|
|
#define BIT_MASK_TXBD_SW_IDX ((u32)0x000000ff)
|
|
#define BIT_MASK_RXBD_SW_IDX ((u32)0x000000ff)
|
|
#define BIT_MASK_TXBD_HW_IDX ((u32)0x000000ff)
|
|
#define BIT_MASK_RXBD_HW_IDX ((u32)0x000000ff)
|
|
|
|
/** @} */
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup REG_USOC_INTR_MASK_or_REG_USOC_INTR_STAT
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_INTR_TX_PKT_OK ((u32)0x00000001 << 0)
|
|
#define BIT_INTR_RX_PKT_OK ((u32)0x00000001 << 1)
|
|
#define BIT_INTR_SIE_TX_FAIL ((u32)0x00000001 << 2)
|
|
#define BIT_INTR_SIE_RX_FAIL ((u32)0x00000001 << 3)
|
|
#define BIT_INTR_TX_TIMEOUT ((u32)0x00000001 << 4)
|
|
#define BIT_INTR_RX_TIMEOUT ((u32)0x00000001 << 5)
|
|
#define BIT_INTR_TX_BUS_ERR ((u32)0x00000001 << 6)
|
|
#define BIT_INTR_RX_BUS_ERR ((u32)0x00000001 << 7)
|
|
#define BIT_INTR_BAD_TX_BD ((u32)0x00000001 << 8)
|
|
#define BIT_INTR_BAD_RX_BD ((u32)0x00000001 << 9)
|
|
#define BIT_INTR_NO_TX_BD ((u32)0x00000001 << 10)
|
|
#define BIT_INTR_NO_RX_BD ((u32)0x00000001 << 11)
|
|
|
|
#define BIT_INTR_TX_AB_WERR ((u32)0x00000001 << 16)
|
|
#define BIT_INTR_TX_AB_RERR ((u32)0x00000001 << 17)
|
|
#define BIT_INTR_TX_MB_WERR ((u32)0x00000001 << 18)
|
|
#define BIT_INTR_TX_MB_RERR ((u32)0x00000001 << 19)
|
|
#define BIT_INTR_TX_DB_WERR ((u32)0x00000001 << 20)
|
|
#define BIT_INTR_TX_DB_RERR ((u32)0x00000001 << 21)
|
|
|
|
#define BIT_INTR_RX_AB_WERR ((u32)0x00000001 << 24)
|
|
#define BIT_INTR_RX_AB_RERR ((u32)0x00000001 << 25)
|
|
#define BIT_INTR_RX_MB_WERR ((u32)0x00000001 << 26)
|
|
#define BIT_INTR_RX_MB_RERR ((u32)0x00000001 << 27)
|
|
#define BIT_INTR_RX_SB_WERR ((u32)0x00000001 << 28)
|
|
#define BIT_INTR_RX_SB_RERR ((u32)0x00000001 << 29)
|
|
|
|
#define USOC_INIT_INTR_MASK (BIT_INTR_TX_PKT_OK | BIT_INTR_RX_PKT_OK | \
|
|
BIT_INTR_SIE_TX_FAIL | BIT_INTR_SIE_RX_FAIL | \
|
|
BIT_INTR_TX_TIMEOUT | BIT_INTR_RX_TIMEOUT| \
|
|
BIT_INTR_TX_BUS_ERR | BIT_INTR_RX_BUS_ERR | \
|
|
BIT_INTR_NO_TX_BD | BIT_INTR_NO_RX_BD | \
|
|
BIT_INTR_BAD_TX_BD |BIT_INTR_BAD_RX_BD)
|
|
/** @} */
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup INTR_TX_MITIGATION
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_TX_MIT_TIME_CFG(x) ((u32)((x) & 0x0000ffff) << 0)
|
|
#define BIT_TX_MIT_PKT_CNT_CFG(x) ((u32)((x) & 0x0000003f) << 16)
|
|
#define BIT_TX_MIT_EN ((u32)0x00000001 << 31)
|
|
/** @} */
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup INTR_RX_MITIGATION
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_RX_MIT_TIME_CFG(x) ((u32)((x) & 0x0000ffff) << 0)
|
|
#define BIT_RX_MIT_PKT_CNT_CFG(x) ((u32)((x) & 0x0000003f) << 16)
|
|
#define BIT_RX_MIT_EN ((u32)0x00000001 << 31)
|
|
/** @} */
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup REG_TX_STUCK_TIMER
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_TX_STUCK_TIME_CFG(x) ((u32)((x) & 0x0000ffff) << 0)
|
|
#define BIT_TX_STUCK_TIMER_EN ((u32)0x00000001 << 16)
|
|
/** @} */
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup REG_RX_STUCK_TIMER
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_RX_STUCK_TIME_CFG(x) ((u32)((x) & 0x0000ffff) << 0)
|
|
#define BIT_RX_STUCK_TIMER_EN ((u32)0x00000001 << 16)
|
|
/** @} */
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup REG_OTG_PWCSEQ_PWC
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_PWC_USBD_EN ((u32)0x00000001 << 0)
|
|
#define BIT_PWC_UPLV_EN ((u32)0x00000001 << 1)
|
|
#define BIT_PWC_UPHV_EN ((u32)0x00000001 << 2)
|
|
/** @} */
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup REG_OTG_PWCSEQ_ISO
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_ISO_USBD_EN ((u32)0x00000001 << 0)
|
|
#define BIT_ISO_USBA_EN ((u32)0x00000001 << 1)
|
|
/** @} */
|
|
|
|
/**************************************************************************//**
|
|
* @defgroup REG_OTG_PWCSEQ_OTG
|
|
* @{
|
|
*****************************************************************************/
|
|
#define BIT_UPLL_CKRDY ((u32)0x00000001 << 5)
|
|
#define BIT_USBOTG_EN ((u32)0x00000001 << 8)
|
|
#define BIT_USBPHY_EN ((u32)0x00000001 << 9)
|
|
/** @} */
|
|
/** @} */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif //_RTL8710B_USOC_H_
|
|
/******************* (C) COPYRIGHT 2016 Realtek Semiconductor *****END OF FILE****/
|