first add sdk

component/soc/realtek/8711b/misc/gcc_utility/Check_Jtag.sh

@@ -0,0 +1,77 @@
+#!/bin/sh
+
+#===============================================================================
+CURRENT_UTILITY_DIR=$(pwd)
+GDBSCPTFILE="../../../component/soc/realtek/8195a/misc/gcc_utility/rtl_gdb_flash_write.txt"
+
+#===============================================================================
+RLXSTS=$(ps -W | grep "rlx_probe_driver.exe" | grep -v "grep" | wc -l)
+echo $RLXSTS
+JLKSTS=$(ps -W | grep "JLinkGDBServer.exe" | grep -v "grep" | wc -l)
+echo $JLKSTS
+
+echo $CURRENT_UTILITY_DIR
+
+#===============================================================================
+#make the new string for being written
+if [ $RLXSTS = 1 ]
+then
+	echo "probe get"
+	
+	#-------------------------------------------
+	LINE_NUMBER=$(grep -n "monitor reset " $GDBSCPTFILE | awk -F":" '{print $1}')
+	DEFAULT_STR=$(grep -n "monitor reset " $GDBSCPTFILE | awk -F":" '{print $2}')
+	#echo $LINE_NUMBER
+	echo $DEFAULT_STR
+	STRLEN_DFT=$(expr length "$DEFAULT_STR")
+	DEFAULT_STR="#monitor reset 1"
+	echo $DEFAULT_STR               
+	#-------------------------------------------
+	SED_PARA="$LINE_NUMBER""c""$DEFAULT_STR"
+	sed -i "$SED_PARA" $GDBSCPTFILE
+	
+	#===========================================
+	LINE_NUMBER=$(grep -n "monitor sleep " $GDBSCPTFILE | awk -F":" '{print $1}')
+	DEFAULT_STR=$(grep -n "monitor sleep " $GDBSCPTFILE | awk -F":" '{print $2}')
+	#echo $LINE_NUMBER
+	echo $DEFAULT_STR
+	STRLEN_DFT=$(expr length "$DEFAULT_STR")
+	DEFAULT_STR="#monitor sleep 20"
+	echo $DEFAULT_STR               
+	#-------------------------------------------
+	SED_PARA="$LINE_NUMBER""c""$DEFAULT_STR"
+	sed -i "$SED_PARA" $GDBSCPTFILE
+else
+
+if [ $JLKSTS = 1 ]
+then
+	echo "jlink get"
+	
+	#-------------------------------------------
+	LINE_NUMBER=$(grep -n "monitor reset " $GDBSCPTFILE | awk -F":" '{print $1}')
+	DEFAULT_STR=$(grep -n "monitor reset " $GDBSCPTFILE | awk -F":" '{print $2}')
+	#echo $LINE_NUMBER
+	echo $DEFAULT_STR
+	STRLEN_DFT=$(expr length "$DEFAULT_STR")
+	DEFAULT_STR="monitor reset 1"
+	echo $DEFAULT_STR               
+	#-------------------------------------------
+	SED_PARA="$LINE_NUMBER""c""$DEFAULT_STR"
+	sed -i "$SED_PARA" $GDBSCPTFILE
+	
+	#===========================================
+	LINE_NUMBER=$(grep -n "monitor sleep " $GDBSCPTFILE | awk -F":" '{print $1}')
+	DEFAULT_STR=$(grep -n "monitor sleep " $GDBSCPTFILE | awk -F":" '{print $2}')
+	#echo $LINE_NUMBER
+	echo $DEFAULT_STR
+	STRLEN_DFT=$(expr length "$DEFAULT_STR")
+	DEFAULT_STR="monitor sleep 20"
+	echo $DEFAULT_STR               
+	#-------------------------------------------
+	SED_PARA="$LINE_NUMBER""c""$DEFAULT_STR"
+	sed -i "$SED_PARA" $GDBSCPTFILE
+	
+fi
+fi
+
+#===============================================================================

component/soc/realtek/8711b/misc/gcc_utility/openocd/amebaz.cfg

@@ -0,0 +1,62 @@
+# Main file for Ameba1 series Cortex-M3 parts
+#
+# !!!!!!
+#
+
+set CHIPNAME rtl8711b
+set CHIPSERIES amebaz
+
+# Adapt based on what transport is active.
+source [find target/swj-dp.tcl]
+
+if { [info exists CHIPNAME] } {
+	set _CHIPNAME $CHIPNAME
+} else {
+	error "CHIPNAME not set. Please do not include amebaz.cfg directly."
+}
+
+if { [info exists CHIPSERIES] } {
+	# Validate chip series is supported
+	if { $CHIPSERIES != "amebaz" } {
+		error "Unsupported chip series specified."
+	}
+	set _CHIPSERIES $CHIPSERIES
+} else {
+	error "CHIPSERIES not set. Please do not include amebaz.cfg directly."
+}
+
+if { [info exists CPUTAPID] } {
+	# Allow user override
+	set _CPUTAPID $CPUTAPID
+} else {
+	# Amebaz use a Cortex M4 core.
+	if { $_CHIPSERIES == "amebaz" } {
+		
+		set _CPUTAPID 0x2ba01477
+		
+	}
+}
+
+swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
+
+
+# Run with *real slow* clock by default since the
+# boot rom could have been playing with the PLL, so
+# we have no idea what clock the target is running at.
+adapter_khz 10
+
+# delays on reset lines
+adapter_nsrst_delay 200
+
+
+# Ameba1 (Cortex M3 core) support SYSRESETREQ
+if {![using_hla]} {
+    # if srst is not fitted use SYSRESETREQ to
+    # perform a soft reset
+    cortex_m reset_config sysresetreq
+}
+
+#$_TARGETNAME configure -event reset-init {amebaz_init}

component/soc/realtek/8711b/misc/gcc_utility/rtl_gdb_debug_jlink.txt

@@ -0,0 +1,55 @@
+# GDB script for loading ram.bin process
+
+#===============================================================================
+#set GDB connection 
+set remotetimeout 100000
+target remote :2331
+
+#===============================================================================
+#Message display setting
+#disable all messages
+
+set verbose off
+set complaints 0
+set confirm off
+set exec-done-display off
+show exec-done-display
+set trace-commands off
+#set debug aix-thread off
+#set debug dwarf2-die 0
+set debug displaced off 
+set debug expression 0
+set debug frame 0
+set debug infrun 0
+set debug observer 0
+set debug overload 0
+set debugvarobj 0
+set pagination off
+set print address off
+set print symbol-filename off
+set print symbol off
+set print pretty off
+set print object off
+#set debug notification off
+set debug parser off
+set debug remote 0
+
+#===============================================================================
+monitor reset 1
+monitor sleep 20
+monitor clrbp
+#===============================================================================
+#Load flash download file
+file ./application/Debug/bin/application.axf
+
+#x /1xw 0x40000210
+
+b main
+continue
+clear main
+#Load the file
+#lo
+
+
+
+

component/soc/realtek/8711b/misc/gcc_utility/rtl_gdb_debug_openocd.txt

@@ -0,0 +1,58 @@
+# GDB script for loading ram.bin process
+
+#===============================================================================
+#set GDB connection 
+set remotetimeout 100000
+target remote :3333
+
+#===============================================================================
+#Message display setting
+#disable all messages
+
+set verbose off
+set complaints 0
+set confirm off
+set exec-done-display off
+show exec-done-display
+set trace-commands off
+#set debug aix-thread off
+#set debug dwarf2-die 0
+set debug displaced off 
+set debug expression 0
+set debug frame 0
+set debug infrun 0
+set debug observer 0
+set debug overload 0
+set debugvarobj 0
+set pagination off
+set print address off
+set print symbol-filename off
+set print symbol off
+set print pretty off
+set print object off
+#set debug notification off
+set debug parser off
+set debug remote 0
+
+#===============================================================================
+#monitor reset init
+#monitor halt
+monitor soft_reset_halt
+monitor sleep 20
+#===============================================================================
+#Load flash download file
+file ./application/Debug/bin/application.axf
+
+#skip sdram init, it has been init in openocd config
+set {int}0x40000210=0x211157
+#x /1xw 0x40000210
+
+b main
+continue
+clear main
+#Load the file
+#lo
+
+
+
+

component/soc/realtek/8711b/misc/gnu_utility/flash_download/Makefile

@@ -0,0 +1,34 @@
+
+include $(MAKE_INCLUDE_GEN)
+
+.PHONY: all clean
+
+
+#*****************************************************************************#
+#                               Object FILE LIST                              #
+#*****************************************************************************#
+OBJS = 
+
+#*****************************************************************************#
+#                        RULES TO GENERATE TARGETS                            #
+#*****************************************************************************#
+
+# Define the Rules to build the core targets
+all: CORE_TARGETS
+	make -C src all
+
+#*****************************************************************************#
+#              GENERATE OBJECT FILE 
+#*****************************************************************************#
+CORE_TARGETS: $(OBJS)
+
+
+#*****************************************************************************#
+#                        RULES TO CLEAN TARGETS                               #
+#*****************************************************************************#
+clean: 
+	make -C src clean
+
+
+
+

component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/Check_Jtag.sh

@@ -0,0 +1,75 @@
+#!/bin/sh
+
+#===============================================================================
+CURRENT_UTILITY_DIR=$(pwd)
+GDBSCPTFILE="../../../component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/rtl_gdb_jtag_boot_com.txt"
+
+#===============================================================================
+RLXSTS=$(ps -W | grep "rlx_probe_driver.exe" | grep -v "grep" | wc -l)
+echo $RLXSTS
+JLKSTS=$(ps -W | grep "JLinkGDBServer.exe" | grep -v "grep" | wc -l)
+echo $JLKSTS
+
+#===============================================================================
+#make the new string for being written
+if [ $RLXSTS = 1 ]
+then
+	echo "probe get"
+	
+	#-------------------------------------------
+	LINE_NUMBER=$(grep -n "monitor reset " $GDBSCPTFILE | awk -F":" '{print $1}')
+	DEFAULT_STR=$(grep -n "monitor reset " $GDBSCPTFILE | awk -F":" '{print $2}')
+	#echo $LINE_NUMBER
+	echo $DEFAULT_STR
+	STRLEN_DFT=$(expr length "$DEFAULT_STR")
+	DEFAULT_STR="#monitor reset 1"
+	echo $DEFAULT_STR               
+	#-------------------------------------------
+	SED_PARA="$LINE_NUMBER""c""$DEFAULT_STR"
+	sed -i "$SED_PARA" $GDBSCPTFILE
+	
+	#===========================================
+	LINE_NUMBER=$(grep -n "monitor sleep " $GDBSCPTFILE | awk -F":" '{print $1}')
+	DEFAULT_STR=$(grep -n "monitor sleep " $GDBSCPTFILE | awk -F":" '{print $2}')
+	#echo $LINE_NUMBER
+	echo $DEFAULT_STR
+	STRLEN_DFT=$(expr length "$DEFAULT_STR")
+	DEFAULT_STR="#monitor sleep 20"
+	echo $DEFAULT_STR               
+	#-------------------------------------------
+	SED_PARA="$LINE_NUMBER""c""$DEFAULT_STR"
+	sed -i "$SED_PARA" $GDBSCPTFILE
+else
+
+if [ $JLKSTS = 1 ]
+then
+	echo "jlink get"
+	echo $CURRENT_UTILITY_DIR 
+	#-------------------------------------------
+	LINE_NUMBER=$(grep -n "monitor reset " $GDBSCPTFILE | awk -F":" '{print $1}')
+	DEFAULT_STR=$(grep -n "monitor reset " $GDBSCPTFILE | awk -F":" '{print $2}')
+	#echo $LINE_NUMBER
+	echo $DEFAULT_STR
+	STRLEN_DFT=$(expr length "$DEFAULT_STR")
+	DEFAULT_STR="monitor reset 1"
+	echo $DEFAULT_STR               
+	#-------------------------------------------
+	SED_PARA="$LINE_NUMBER""c""$DEFAULT_STR"
+	sed -i "$SED_PARA" $GDBSCPTFILE
+	
+	#===========================================
+	LINE_NUMBER=$(grep -n "monitor sleep " $GDBSCPTFILE | awk -F":" '{print $1}')
+	DEFAULT_STR=$(grep -n "monitor sleep " $GDBSCPTFILE | awk -F":" '{print $2}')
+	#echo $LINE_NUMBER
+	echo $DEFAULT_STR
+	STRLEN_DFT=$(expr length "$DEFAULT_STR")
+	DEFAULT_STR="monitor sleep 20"
+	echo $DEFAULT_STR               
+	#-------------------------------------------
+	SED_PARA="$LINE_NUMBER""c""$DEFAULT_STR"
+	sed -i "$SED_PARA" $GDBSCPTFILE
+	
+fi
+fi
+
+#===============================================================================

component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/SetupGDB_FPGA.sh

@@ -0,0 +1,31 @@
+#!/bin/sh
+
+#===============================================================================
+CURRENT_UTILITY_DIR=$(pwd)
+FLASHDLIMGDIR=$1
+IMAGE_TARGET_FOLDER=$CURRENT_UTILITY_DIR/image
+echo "..."
+echo $CURRENT_UTILITY_DIR
+echo $IMAGE_TARGET_FOLDER
+GDBSCPTFILE="$FLASHDLIMGDIR/rtl_gdb_flash_write.txt" 
+
+#===============================================================================
+#set image2 code size
+FLASHFILENAME="$IMAGE_TARGET_FOLDER/image2_all_ota1.bin" 
+FLASH_FILE_SIZE=$(stat -c %s $FLASHFILENAME)
+sed -i "s#^set \$FlashFileSize =.*#set \$FlashFileSize =$FLASH_FILE_SIZE#g"  $GDBSCPTFILE
+
+#set boot code size
+FLASHFILENAME="$IMAGE_TARGET_FOLDER/boot_all.bin" 
+FLASH_FILE_SIZE=$(stat -c %s $FLASHFILENAME)
+sed -i "s#^set \$XIPBootSize =.*#set \$XIPBootSize =$FLASH_FILE_SIZE#g"  $GDBSCPTFILE
+
+#set system data size
+FLASHFILENAME="$IMAGE_TARGET_FOLDER/system.bin" 
+FLASH_FILE_SIZE=$(stat -c %s $FLASHFILENAME)
+sed -i "s#^set \$SysDataSize =.*#set \$SysDataSize =$FLASH_FILE_SIZE#g"  $GDBSCPTFILE
+
+#OTA2 size
+FLASHFILENAME="$IMAGE_TARGET_FOLDER/image2_all_ota2.bin" 
+FLASH_FILE_SIZE=$(stat -c %s $FLASHFILENAME)
+sed -i "s#^set \$OTA2Size =.*#set \$OTA2Size =$FLASH_FILE_SIZE#g"  $GDBSCPTFILE

component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/SetupGDB_NORMAL.sh

@@ -0,0 +1,27 @@
+#!/bin/sh
+
+#===============================================================================
+CURRENT_UTILITY_DIR=$(pwd)
+echo "..."
+echo $CURRENT_UTILITY_DIR
+BOOTALLFILENAME="./application/Debug/bin/boot_all.bin"
+RAMFILENAME="./application/Debug/bin/image2_all_ota1.bin"
+
+echo $RAMFILENAME
+#RAMFILENAME="ram_2.bin"
+GDBSCPTFILE="../../../component/soc/realtek/8711b/misc/gcc_utility/flash_download/rtl_gdb_flash_write.txt"
+
+#===============================================================================
+#get file size
+BOOTALL_FILE_SIZE=$(stat -c %s $BOOTALLFILENAME)
+BOOTALL_FILE_SIZE_HEX=`echo "obase=16; $BOOTALL_FILE_SIZE"|bc`
+
+RAM_FILE_SIZE=$(stat -c %s $RAMFILENAME)
+RAM_FILE_SIZE_HEX=`echo "obase=16; $RAM_FILE_SIZE"|bc`
+
+echo "size "$BOOTALL_FILE_SIZE" --> 0x"$BOOTALL_FILE_SIZE_HEX
+echo "size "$RAM_FILE_SIZE" --> 0x"$RAM_FILE_SIZE_HEX
+
+echo "set \$BOOTALLFILESize = 0x$BOOTALL_FILE_SIZE_HEX" > BTAsize.gdb
+echo "set \$RamFileSize = 0x$RAM_FILE_SIZE_HEX" > fwsize.gdb
+exit

component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/rtl_gdb_flash_write.txt

@@ -0,0 +1,190 @@
+# GDB script for loading ram.bin process
+
+source ../../../component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/rtl_gdb_jtag_boot_com.txt
+
+#===============================================================================
+#Macro define
+set $FLASHDATBUFSIZE = 0x800
+
+set $IMAGE_BOOT = 0x001
+set $IMAGE_XIP1 = 0x002
+set $IMAGE_XIP2 = 0x003
+set $IMAGE_SYSD = 0x004
+
+#===============================================================================
+#register define
+set $PERI_ON_BASE = 0x40000000
+set $REG_SOC_PERI_FUNC0_EN = 0x0210
+set $SPI_FLASH_BASE = 0x08000000
+#===============================================================================
+
+#Variables declaration (1)
+#binary file size
+set $BOOTALLFileSize = 0x0000
+set $RamFileSize = 0x0000
+source BTAsize.gdb
+source fwsize.gdb
+printf "-------------------------------\n"
+printf "BOOTALLFileSize: %x\n",$BOOTALLFILESize
+printf "RamFileSize: %x\n",$RamFileSize
+printf "-------------------------------\n"
+
+
+#===============================================================================
+#Load flash download file
+printf "Load flash loader.\n"
+file ../../../component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/target_FPGA.axf
+#Load the file
+#lo
+#restore ./application/Debug/bin/rom.bin binary 0x0
+restore ../../../component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/flash_loader_ram_1.bin binary 0x10002000
+#===============================================================================
+
+
+#===============================================================================
+#flash write function
+define flash_write
+	printf "flash_write FileName:%x \n", $arg0
+	printf "flash_write FileSize:%d \n", $arg1
+	printf "flash_write FlashAddrForWrite:%x \n", FlashAddrForWrite
+
+	set $FileName = $arg0
+	set $FileSize = $arg1
+	set $Loopnumber = ($FileSize / $FLASHDATBUFSIZE)
+	set $TailSize = ($FileSize % $FLASHDATBUFSIZE)
+	printf "FileSize: %x\n",$FileSize
+	printf "Loopnumber = %d\n", $Loopnumber
+	printf "TailSize = %d\n", $TailSize
+	printf "global variables\n"
+
+	set $FILESTARTADDR = 0
+	set $FLASHDATSRC = FlashDatSrc
+	if( $FileSize <  $FLASHDATBUFSIZE )
+		set FlashBlockWriteSize = $FileSize
+	else
+		set FlashBlockWriteSize = $FLASHDATBUFSIZE
+	end
+
+	printf "FlashDatSrc:%x\n", $FLASHDATSRC
+	printf  "FlashBlockWriteSize "
+	printf "FlashBlockWriteSize:%x\n", FlashBlockWriteSize
+	printf  "FlashAddrForWrite:%x", FlashAddrForWrite
+
+	printf  "Flash write start...\n"
+	set $Loop = 0
+	while  ($Loop < $Loopnumber)
+    		set $FILESTARTADDR = $FLASHDATBUFSIZE * $Loop
+    		printf "FILESTARTADDR"
+    		p /x $FILESTARTADDR
+    		p /x FlashAddrForWrite
+    		p /x $Loop
+
+		if ($FileName == $IMAGE_XIP1)
+    			restore ./application/Debug/bin/image2_all_ota1.bin binary ($FLASHDATSRC-$FILESTARTADDR) $FILESTARTADDR ($FILESTARTADDR + $FLASHDATBUFSIZE)
+		end
+		if ($FileName == $IMAGE_XIP2)
+    			restore ./application/Debug/bin/image2_all_ota2.bin binary ($FLASHDATSRC-$FILESTARTADDR) $FILESTARTADDR ($FILESTARTADDR + $FLASHDATBUFSIZE)
+		end
+		if ($FileName == $IMAGE_BOOT)
+			restore ./application/Debug/bin/boot_all.bin binary ($FLASHDATSRC-$FILESTARTADDR) $FILESTARTADDR ($FILESTARTADDR + $FLASHDATBUFSIZE)
+		end
+		if ($FileName == $IMAGE_SYSD)
+			restore ./application/Debug/bin/system.bin binary ($FLASHDATSRC-$FILESTARTADDR) $FILESTARTADDR ($FILESTARTADDR + $FLASHDATBUFSIZE)
+		end
+    		c
+    
+    		set $Loop = $Loop + 0x01
+	end
+
+	if ( $TailSize > 0)
+    		set $FILESTARTADDR = $FLASHDATBUFSIZE * $Loop
+
+		printf "FILESTARTADDR"
+		p /x $FILESTARTADDR
+		p /x FlashAddrForWrite
+		p /x $Loop
+
+		if ($FileName == $IMAGE_XIP1)
+			restore ./application/Debug/bin/image2_all_ota1.bin binary ($FLASHDATSRC-$FILESTARTADDR) $FILESTARTADDR ($FILESTARTADDR + $TailSize)
+		end
+		if ($FileName == $IMAGE_XIP2)
+			restore ./application/Debug/bin/image2_all_ota2.bin binary ($FLASHDATSRC-$FILESTARTADDR) $FILESTARTADDR ($FILESTARTADDR + $TailSize)
+		end
+		if ($FileName == $IMAGE_BOOT)
+			restore ./application/Debug/bin/boot_all.bin binary ($FLASHDATSRC-$FILESTARTADDR) $FILESTARTADDR ($FILESTARTADDR + $TailSize)
+		end
+		if ($FileName == $IMAGE_SYSD)
+			restore ./application/Debug/bin/system.bin binary ($FLASHDATSRC-$FILESTARTADDR) $FILESTARTADDR ($FILESTARTADDR + $TailSize)
+		end
+		c
+	end
+end
+
+#===============================================================================
+#Set rom boot BIT to flash loader
+set $Temp = 0x0
+set $Temp = {int}($PERI_ON_BASE+$REG_SOC_PERI_FUNC0_EN)
+p /x $Temp
+
+set $Temp = ($Temp | (0x01 << 26))
+set $Temp = ($Temp & ~(0x01 << 27))
+set $Temp = ($Temp & ~(0x01 << 28))
+p /x $Temp
+
+set {int}($PERI_ON_BASE+$REG_SOC_PERI_FUNC0_EN) = $Temp
+printf "....\n"
+printf "wakeup bit(%x):%x\n", ($PERI_ON_BASE+$REG_SOC_PERI_FUNC0_EN), {int}($PERI_ON_BASE+$REG_SOC_PERI_FUNC0_EN)
+#===============================================================================
+
+#===============================================================================
+#b RtlFlashProgram:StartOfFlashBlockWrite
+b rtl_flash_download.c:88
+
+#continue
+c
+#=============================================================================== 
+
+#=============================================================================== 
+#flash write
+#set $XIPBootSize =4324
+set $XIPBootSize =$BOOTALLFILESize
+set FlashAddrForWrite =0x00000
+flash_write $IMAGE_BOOT $XIPBootSize
+
+
+#dump binary memory  dump.bin $SPI_FLASH_BASE ($SPI_FLASH_BASE + $XIPBootSize)
+
+set $SysDataSize =32
+set FlashAddrForWrite =0x09000
+#flash_write $IMAGE_SYSD $SysDataSize
+
+#set $FlashFileSize =299200
+set $FlashFileSize =$RamFileSize
+
+set FlashAddrForWrite =0x0B000
+flash_write $IMAGE_XIP1 $FlashFileSize
+
+set $OTA2Size =299200
+set FlashAddrForWrite =0x80000
+#flash_write $IMAGE_XIP2 $OTA2Size
+
+#Tell flashloader complete flag
+set FlashWriteComplete = 0x1
+#=============================================================================== 
+
+#=============================================================================== 
+#dump image from flash
+printf "dump for check\n"
+info b
+delete
+info b
+
+quit
+
+c
+
+#delete
+
+quit
+#===============================================================================
+

component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/rtl_gdb_jtag_boot.txt

@@ -0,0 +1,36 @@
+# GDB script for loading ram.bin process
+
+source gnu_utility/flash_download/image/rtl_gdb_jtag_boot_com.txt
+
+#===============================================================================
+#Load the file
+file ./image/target.axf
+#lo
+#restore ./image/rom.bin binary 0x0
+restore ./image/ram_1.bin binary 0x10002000
+restore ./image/ram_2.bin binary 0x10005000
+
+printf "Load image to sram.\n"
+#set $dumpstartaddr = 0x00000000
+#set $dumpendaddr = 0x10000
+#dump binary memory  rom.bin $dumpstartaddr $dumpendaddr
+
+#===============================================================================
+set $Temp = 0x0
+set $Temp = {int}($PERI_ON_BASE+$REG_SOC_PERI_FUNC0_EN)
+p /x $Temp
+
+set $Temp = ($Temp & ~(0x01 << 26))
+set $Temp = ($Temp & ~(0x01 << 27))
+set $Temp = ($Temp & ~(0x01 << 28))
+set $Temp = ($Temp | (0x01 << 28))
+p /x $Temp
+
+set {int}($PERI_ON_BASE+$REG_SOC_PERI_FUNC0_EN) = $Temp
+printf "....\n"
+printf "wakeup bit(%x):%x\n", ($PERI_ON_BASE+$REG_SOC_PERI_FUNC0_EN), {int}($PERI_ON_BASE+$REG_SOC_PERI_FUNC0_EN)
+
+c
+
+#quit
+

component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/rtl_gdb_jtag_boot_com_jlink.txt

@@ -0,0 +1,55 @@
+# GDB script for loading ram.bin process
+
+#===============================================================================
+#set GDB connection 
+set remotetimeout 100000
+target remote : 2331
+
+#===============================================================================
+
+#===============================================================================
+#Message display setting
+#disable all messages
+
+set verbose off
+set complaints 0
+set confirm off
+set exec-done-display off
+show exec-done-display
+set trace-commands off
+#set debug aix-thread off
+#set debug dwarf2-die 0
+set debug displaced off 
+set debug expression 0
+set debug frame 0
+set debug infrun 0
+set debug observer 0
+set debug overload 0
+#set debugvarobj 0
+set pagination off
+set print address off
+set print symbol-filename off
+set print symbol off
+set print pretty off
+set print object off
+#set debug notification off
+set debug parser off
+set debug remote 0
+
+#===============================================================================
+#set JTAG and external SRAM
+#source ../../utility/jtag_cfg/J-Link_with_JTAG_and_external_SRAM.txt
+monitor reset 1
+monitor sleep 20
+
+#===============================================================================
+set $FLASHDATBUFSIZE = 0x800
+
+#===============================================================================
+#define PERI_ON_BASE 0x40000000
+set $PERI_ON_BASE = 0x40000000
+#define REG_SOC_PERI_FUNC0_EN 0x0218
+set $REG_SOC_PERI_FUNC0_EN = 0x0210
+
+#define SPI_FLASH_BASE 0x4000000
+set $SPI_FLASH_BASE = 0x08000000

component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/rtl_gdb_jtag_boot_com_openocd.txt

@@ -0,0 +1,59 @@
+# GDB script for loading ram.bin process
+
+#===============================================================================
+#set GDB connection 
+set remotetimeout 100000
+target remote : 3333
+
+#===============================================================================
+
+#===============================================================================
+#Message display setting
+#disable all messages
+
+set verbose off
+set complaints 0
+set confirm off
+set exec-done-display off
+show exec-done-display
+set trace-commands off
+#set debug aix-thread off
+#set debug dwarf2-die 0
+set debug displaced off 
+set debug expression 0
+set debug frame 0
+set debug infrun 0
+set debug observer 0
+set debug overload 0
+#set debugvarobj 0
+set pagination off
+set print address off
+set print symbol-filename off
+set print symbol off
+set print pretty off
+set print object off
+#set debug notification off
+set debug parser off
+set debug remote 0
+
+#===============================================================================
+#set JTAG and external SRAM
+#source ../../utility/jtag_cfg/J-Link_with_JTAG_and_external_SRAM.txt
+
+#monitor reset init
+#monitor halt
+monitor soft_reset_halt
+monitor sleep 20
+
+
+#===============================================================================
+set $FLASHDATBUFSIZE = 0x800
+
+#===============================================================================
+#define PERI_ON_BASE 0x40000000
+set $PERI_ON_BASE = 0x40000000
+#define REG_SOC_PERI_FUNC0_EN 0x0218
+set $REG_SOC_PERI_FUNC0_EN = 0x0210
+
+#define SPI_FLASH_BASE 0x4000000
+set $SPI_FLASH_BASE = 0x08000000

component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/rtl_gdb_jtag_boot_xip.txt

@@ -0,0 +1,31 @@
+# GDB script for loading ram.bin process
+
+source gnu_utility/flash_download/image/rtl_gdb_jtag_boot_com.txt
+
+#===============================================================================
+#load rom.bin
+#restore ./image/rom.bin binary 0x0
+
+printf "Load image to sram.\n"
+set $dumpstartaddr = 0x00000000
+set $dumpendaddr = 0x10000
+dump binary memory  rom.bin $dumpstartaddr $dumpendaddr
+
+#===============================================================================
+set $Temp = 0x0
+set $Temp = {int}($PERI_ON_BASE+$REG_SOC_PERI_FUNC0_EN)
+p /x $Temp
+
+set $Temp = ($Temp & ~(0x01 << 26))
+set $Temp = ($Temp & ~(0x01 << 27))
+set $Temp = ($Temp & ~(0x01 << 28))
+p /x $Temp
+
+set {int}($PERI_ON_BASE+$REG_SOC_PERI_FUNC0_EN) = $Temp
+printf "....\n"
+printf "wakeup bit(%x):%x\n", ($PERI_ON_BASE+$REG_SOC_PERI_FUNC0_EN), {int}($PERI_ON_BASE+$REG_SOC_PERI_FUNC0_EN)
+
+c
+
+#quit
+

component/soc/realtek/8711b/misc/gnu_utility/flash_download/image/rtl_gdb_jtag_load_rom.txt

@@ -0,0 +1,16 @@
+# GDB script for loading ram.bin process
+
+source gnu_utility/flash_download/image/rtl_gdb_jtag_boot_com.txt
+
+#===============================================================================
+#Load the file
+file ./image/target.axf
+restore ./image/rom.bin binary 0x0
+
+#dump binary memory  dump.bin 0x00000000 0x00080000
+
+#===============================================================================
+#c
+
+quit
+

component/soc/realtek/8711b/misc/gnu_utility/flash_download/src/Makefile

@@ -0,0 +1,35 @@
+
+include $(MAKE_INCLUDE_GEN)
+
+.PHONY: all clean
+
+MODULE_IFLAGS = -I../include
+
+
+#*****************************************************************************#
+#                               Object FILE LIST                              #
+#*****************************************************************************#
+OBJS = rtl_flash_download.o rtl_flash_download_entry.o
+
+#*****************************************************************************#
+#                        RULES TO GENERATE TARGETS                            #
+#*****************************************************************************#
+
+# Define the Rules to build the core targets
+all: CORE_TARGETS RENAME_LOADER_OBJS COPY_RAM_OBJS
+
+	
+#*****************************************************************************#
+#              GENERATE OBJECT FILE 
+#*****************************************************************************#
+CORE_TARGETS:	$(OBJS)
+
+
+#*****************************************************************************#
+#                        RULES TO CLEAN TARGETS                               #
+#*****************************************************************************#
+clean:
+	$(REMOVE) *.o
+	$(REMOVE) *.i
+	$(REMOVE) *.s
+	$(REMOVE) *.d

component/soc/realtek/8711b/misc/gnu_utility/flash_download/src/flash_to_flash.c

@@ -0,0 +1,145 @@
+#include "rtl8710b.h"
+#include "build_info.h"
+
+
+#define INH_PIN	_PA_0
+#define CTRL_PIN	_PA_5
+
+#define CHN_Y1	0
+#define CHN_Y2	1
+
+#define FLASHDATALEN		128*1024
+BOOT_RAM_BSS_SECTION volatile u8*  FlashDataBuf;
+
+/* channel : the parameter can be CHN_Y1 or CHN_Y2 */
+BOOT_RAM_TEXT_SECTION
+static VOID SPDT_Switch(u32 channel)
+{
+	GPIO_WriteBit(CTRL_PIN, channel);
+}
+
+
+BOOT_RAM_TEXT_SECTION
+static VOID SPDT_Initial_Setup(VOID)
+{
+	GPIO_InitTypeDef GPIO_InitStruct;
+
+	/* INH pin: enables or disables the switch. 0: Enable, 1: Disable */
+	GPIO_InitStruct.GPIO_Pin = INH_PIN;
+	GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_NOPULL;
+	GPIO_InitStruct.GPIO_Mode = GPIO_Mode_OUT;
+	GPIO_Init(&GPIO_InitStruct);
+	/* Enable the switch */
+	GPIO_WriteBit(INH_PIN, 0);
+
+	/* CTRL pin: controls the switch. 0: Y1 channel is on, 1: Y2 channel is on */
+	GPIO_InitStruct.GPIO_Pin = CTRL_PIN;
+	GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_NOPULL;
+	GPIO_InitStruct.GPIO_Mode = GPIO_Mode_OUT;
+	GPIO_Init(&GPIO_InitStruct);
+	/* Default on-channel is Y1 */
+	SPDT_Switch(CHN_Y1);
+
+}
+
+BOOT_RAM_TEXT_SECTION
+VOID BOOT_RAM_InitFlash(void)
+{
+	u32 Value32;
+
+	/* disable cache first  */
+	Cache_Enable(DISABLE); /* cahce enable becuase flash init will flush cahce */
+	RCC_PeriphClockCmd(APBPeriph_FLASH, APBPeriph_FLASH_CLOCK, DISABLE);
+
+	/* set 500MHz Div to gen spic clock 200MHz */
+	FLASH_ClockDiv(FLASH_CLK_DIV2P5);
+	RCC_PeriphClockCmd(APBPeriph_FLASH, APBPeriph_FLASH_CLOCK, ENABLE);
+	
+	PinCtrl(PERIPHERAL_SPI_FLASH, S0, ON);
+	FLASH_StructInit(&flash_init_para);
+	flash_init_para.FLASH_cur_cmd = FLASH_CMD_READ;
+	flash_init_para.FLASH_baud_rate = 1;
+	flash_init_para.FLASH_baud_boot = 1;
+	FLASH_Init(SpicOneBitMode);
+
+	DBG_8195A("Init flash baudrate: %d\n", flash_init_para.FLASH_baud_rate);
+
+	/* enable cache before XIP */
+	Cache_Enable(ENABLE);
+	Cache_Flush();
+}
+
+BOOT_RAM_TEXT_SECTION
+VOID BOOT_RAM_FlashtoFlash(VOID)
+{
+	u32 addr = 0;
+	u32 image_size = 512; 		 //test size is 512KB
+	u32 tail_size;
+	u32 times = image_size / (FLASHDATALEN / 1024);
+	int i = 0, j = 0;
+
+	BOOT_RAM_InitFlash();
+	DBG_8195A("Flash init done!\n");
+	
+	FlashDataBuf = __image2_entry_func__;
+	
+	DBG_8195A("Start copy data from source flash to destination flash...\n");
+	SPDT_Initial_Setup();
+
+	/* Erase Destination flash */
+	SPDT_Switch(CHN_Y2);
+	FLASH_Erase(EraseChip, 0);
+	DBG_8195A("Erase Destination flash done!\n");
+
+	for(; i < times; i++){
+		/* SPDT switch to Source flash */
+		SPDT_Switch(CHN_Y1);
+
+		_memcpy(FlashDataBuf, SPI_FLASH_BASE + addr, FLASHDATALEN);
+		
+		/* SPDT switch to Destination flash */
+		SPDT_Switch(CHN_Y2);
+
+		for(j = 0; j < FLASHDATALEN; j += 8){
+			FLASH_TxData12B(addr + j, 8, FlashDataBuf + j);
+		}
+		
+		addr += FLASHDATALEN;
+		DBG_8195A("128KB copied done!\n");
+
+	}
+
+	tail_size = image_size % (FLASHDATALEN / 1024);
+	if(tail_size != 0){
+		/* SPDT switch to Source flash */
+		SPDT_Switch(CHN_Y1);
+
+		_memcpy(FlashDataBuf, SPI_FLASH_BASE + addr, tail_size * 1024);
+		
+		/* SPDT switch to Destination flash */
+		SPDT_Switch(CHN_Y2);
+
+		for(j = 0; j < tail_size * 1024; j += 4){
+			FLASH_TxData12B(addr + j, 4, FlashDataBuf + j);
+		}
+
+		addr += tail_size * 1024;
+		DBG_8195A("%d KB done!\n", tail_size);
+	}
+
+	DBG_8195A("Flash to flash done!\n");
+	while(1){}
+
+}
+
+
+IMAGE1_ENTRY_SECTION
+RAM_FUNCTION_START_TABLE RamStartTable = {
+	.RamStartFun = BOOT_RAM_FlashtoFlash,
+	.RamWakeupFun = NULL, /* init in socps SOCPS_InitSYSIRQ */
+	.RamPatchFun0 = BOOT_RAM_FlashtoFlash,
+	.RamPatchFun1 = BOOT_RAM_FlashtoFlash,
+	.RamPatchFun2 = BOOT_RAM_FlashtoFlash,
+	.FlashStartFun = NULL
+};
+

component/soc/realtek/8711b/misc/gnu_utility/flash_download/src/rtl_flash_download.c

@@ -0,0 +1,124 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *                                        
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#include "rtl8710b.h"
+#include "build_info.h"
+
+
+
+#define FLASHDATALEN 2048
+BOOT_RAM_BSS_SECTION volatile u8  FlashDataBuf[FLASHDATALEN];
+BOOT_RAM_BSS_SECTION volatile u32 *pFlashDatSrc;
+BOOT_RAM_BSS_SECTION volatile u32 FlashBlockWriteSize;    //The maximum size of each block write is FLASHDATALEN,
+                            //The actual value MUST be given by GDB.
+BOOT_RAM_BSS_SECTION volatile u32 FlashAddrForWrite;      //The flash address to be written.
+                            //The actual value MUST be given by GDB.      
+BOOT_RAM_BSS_SECTION volatile u8  FlashWriteComplete;                            
+BOOT_RAM_BSS_SECTION volatile u32 FlashDatSrc;
+BOOT_RAM_BSS_SECTION u32 erase_sector_addr = 0;
+	
+extern u8 __rom_bss_start__[];
+extern u8 __rom_bss_end__[];
+extern u8 __ram_start_table_start__[];
+
+extern u32 ConfigDebugErr;
+extern u32 ConfigDebugInfo;
+extern u32 ConfigDebugWarn;
+
+void BOOT_RAM_TEXT_SECTION
+RtlFlashProgram(VOID)
+{
+	volatile u32 FlashWriteCnt = 0;
+	u8 flash_ID[3];
+
+	//2 Need Modify
+	VECTOR_TableInit(0x1003EFFC);
+	DBG_8195A("==========================================================\n");
+	DBG_8195A("Flash Downloader Build Time: "UTS_VERSION"\n");  
+	DBG_8195A("==========================================================\n");
+
+	FlashDatSrc = (u32)&FlashDataBuf;
+	pFlashDatSrc = (u32 *)&FlashDataBuf;
+	FlashWriteComplete = 0;
+	FlashBlockWriteSize = 0;
+	FlashAddrForWrite = 0;
+	erase_sector_addr = 0;
+
+	Cache_Enable(DISABLE);
+	RCC_PeriphClockCmd(APBPeriph_FLASH, APBPeriph_FLASH_CLOCK, DISABLE);
+	FLASH_CalibrationNewCmd(DISABLE);
+
+	/* set 500MHz Div to gen spic clock 100MHz, flash baudrate = 50MHz */
+	FLASH_ClockDiv(FLASH_CLK_DIV5P0);
+	RCC_PeriphClockCmd(APBPeriph_FLASH, APBPeriph_FLASH_CLOCK, ENABLE);
+	PinCtrl(PERIPHERAL_SPI_FLASH,S0,ON);
+
+	DBG_8195A("Flash init start\n");
+	FLASH_StructInit(&flash_init_para);
+	FLASH_Init(SpicOneBitMode);
+	DBG_8195A("Flash init done\n");
+
+	FLASH_RxCmd(flash_init_para.FLASH_cmd_rd_id, 3, flash_ID);
+	if(flash_ID[0] == 0x20){
+		flash_init_para.FLASH_cmd_chip_e = 0xC7;}
+
+	//4 Erase the flash before writing it
+	//FLASH_Erase(EraseChip, 0);
+	DBG_8195A("Flash download start\n");
+	//4 Program the flash from memory data
+	while(1)
+	{
+StartOfFlashBlockWrite:
+		asm("nop");
+		asm("nop");
+		asm("nop");
+		asm("nop");
+       
+		FlashWriteCnt = 0;
+		pFlashDatSrc = (u32 *)&FlashDataBuf[0];
+		if (FlashWriteComplete == 1)
+			break;
+
+		while (FlashWriteCnt < FlashBlockWriteSize)
+		{
+			u32 sector_addr1 = FlashAddrForWrite  & 0xFFFFF000; /* sector of first byte */
+
+			if(sector_addr1 >= erase_sector_addr) {
+				FLASH_Erase(EraseSector, sector_addr1);
+				erase_sector_addr = sector_addr1 + 0x1000; /* next sector we should erase */
+			}
+
+			FLASH_TxData12B(FlashAddrForWrite, 4, pFlashDatSrc);
+			
+			FlashAddrForWrite += 4;
+			FlashWriteCnt += 4;
+			pFlashDatSrc+= 1; 			
+		}   
+
+		goto StartOfFlashBlockWrite;
+	}
+
+	DBG_8195A("Flash download done\n");
+    
+	while(1){
+		if  (FlashWriteComplete == 1) {           
+			FlashWriteComplete = 0;
+		}
+	}    
+}

component/soc/realtek/8711b/misc/gnu_utility/flash_download/src/rtl_flash_download_entry.c

@@ -0,0 +1,33 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *                                        
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#include "rtl8710b.h"
+#include "build_info.h"
+#include "rtl8711b_flash.h"
+
+void RtlFlashProgram(VOID);
+
+IMAGE1_ENTRY_SECTION
+RAM_FUNCTION_START_TABLE RamStartTable = {
+	.RamStartFun = RtlFlashProgram,
+	.RamWakeupFun = RtlFlashProgram,
+	.RamPatchFun0 = RtlFlashProgram,
+	.RamPatchFun1 = RtlFlashProgram,
+	.RamPatchFun2 = RtlFlashProgram
+};

component/soc/realtek/8711b/misc/iar_utility/common/8710b.ddf

@@ -0,0 +1,22 @@
+;; Memory information ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; 
+;; Used to define address zones within the ARM address space (Memory). 
+;;
+;;   Name      may be almost anything
+;;   AdrSpace  must be Memory
+;;   StartAdr  start of memory block
+;;   EndAdr    end of memory block
+;;   AccType   type of access, read-only (R), read-write (RW) or SFR (W)
+
+[Memory]
+;;         Name             AdrSpace    StartAdr    EndAdr      AccType   Width
+Memory =  ROM              Memory      0x00000000  0x003FFFFF  RW
+Memory =  SRAM             Memory      0x10000000  0x1003FFFF  RW
+Memory =  SFR              Memory      0x40000000  0x41FFFFFF  RW
+Memory =  SFR_Bitband      Memory      0x42000000  0x43FFFFFF  RW
+Memory =  PPB              Memory      0xE0000000  0xFFFFFFFF  RW  
+
+TrustedRanges = true
+UseSfrFilter = true
+
+[SfrInclude]

component/soc/realtek/8711b/misc/iar_utility/common/flashloader/FlashRTL8195aMP.board

@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="iso-8859-1"?> 
+
+<flash_board> 
+  <pass> 
+  	<range>CODE 0x10000bc0 0x10003FFF</range> 
+    <loader>$PROJ_DIR$\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash</loader>    
+    <abs_offset>0x00000000</abs_offset>
+    <args>--head</args>
+  </pass> 
+  <pass> 
+  	<range>CODE 0x10004000 0x1006FFFF</range> 
+    <loader>$PROJ_DIR$\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash</loader>  
+    <abs_offset>0x00000000</abs_offset> 
+    <args>--cascade</args>
+  </pass>  
+  <pass>
+    <range>CODE 0x30000000 0x301FFFFF</range> 
+    <loader>$PROJ_DIR$\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash</loader>
+    <abs_offset>0x00000000</abs_offset>
+    <args>--cascade</args>
+  </pass>  
+  <ignore>CODE 0x00000000 0x000FFFFF</ignore> 
+  <ignore>CODE 0x10000000 0x10000bbf</ignore> 
+</flash_board> 

component/soc/realtek/8711b/misc/iar_utility/common/flashloader/FlashRTL8195aMP.flash

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<flash_device>
+  <exe>$PROJ_DIR$\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.out</exe>
+  <flash_base>0x00000000</flash_base>
+  <page>4</page>
+  <block>256 0x1000</block>
+  <macro>$PROJ_DIR$\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.mac</macro>
+  <aggregate>1</aggregate>
+</flash_device>

component/soc/realtek/8711b/misc/iar_utility/common/flashloader/FlashRTL8195aMP.mac

@@ -0,0 +1,74 @@
+setup()
+{
+	__var tmp;
+
+	__hwResetWithStrategy(0, 2);
+	__hwReset(1);
+
+	__delay(200);
+	
+/*
+	tmp = __readMemory32(0x40000014,"Memory");	__delay(10);
+	__message "0x40000014=",tmp:%x;
+
+	__writeMemory32(0x21, 			0x40000014, "Memory");	__delay(10);
+
+	__writeMemory32(0x1FC00002,     0x40000304, "Memory");	__delay(10);
+	__writeMemory32(0x400,          0x40000250, "Memory");	__delay(10);
+	__writeMemory32(0x0,            0x40000340, "Memory");	__delay(10);
+	__writeMemory32(0xc04,			0x40000230, "Memory");	__delay(10);
+	__writeMemory32(0x1157, 		0x40000210, "Memory");	__delay(10);
+	__writeMemory32(0x110011, 		0x400002c0, "Memory");	__delay(10);
+	__writeMemory32(0xffffffff,     0x40000320, "Memory");	__delay(10);
+*/
+/*      
+	__writeMemory32(0x1, 		0x40005224, "Memory");	__delay(10);
+	__writeMemory32(0x2c8, 		0x40005004, "Memory");	__delay(10);
+	__writeMemory32(0xffffd000,	0x40005008, "Memory");	__delay(10);
+	__delay(3);
+	__writeMemory32(0x22, 		0x40005020, "Memory");	__delay(10);
+	__delay(3);
+	__writeMemory32(0x09032001,	0x40005010, "Memory");	__delay(10);
+	__delay(3);
+	__writeMemory32(0x2611, 	0x40005014, "Memory");	__delay(10);
+	__delay(3);
+	__writeMemory32(0x68413, 	0x40005018, "Memory");	__delay(10);
+	__delay(3);
+	__writeMemory32(0x42, 		0x4000501c, "Memory");	__delay(10);
+	__delay(3);
+        
+        // Enable
+ 	__writeMemory32(0x700, 		0x4000500c, "Memory");	__delay(10);
+	__delay(20);
+	__writeMemory32(0x1, 		0x40005000, "Memory");	__delay(10);
+	__delay(100);
+	tmp = __readMemory32(0x40005000,"Memory");	__delay(10);
+	__writeMemory32(0x600, 		0x4000500c, "Memory");	__delay(10);
+	__delay(30);  
+*/
+}
+
+execUserPreload()
+{
+		__var tmp;
+		setup();
+		tmp = __readMemory32(0x40000210, "Memory")|(1<<28);
+		__writeMemory32(tmp, 0x40000210, "Memory");
+}
+
+execUserSetup()
+{
+		//execUserPreload();
+		//__loadImage("$TARGET_PATH$ ", 0, 0);
+		//__writeMemory32(0x80000000, 0x40000218, "Memory");
+}
+
+execUserFlashInit()  // Called by debugger before loading flash loader in RAM.
+{
+		__var tmp;
+		__message "----- Prepare hardware for Flashloader -----\n";
+		setup();
+		tmp = __readMemory32(0x40000210, "Memory")|(1<<28);
+		__writeMemory32(tmp, 0x40000210, "Memory");
+		
+}

component/soc/realtek/8711b/misc/iar_utility/common/flashloader/FlashRTL8195aMP_img1.board

@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<flash_board>
+  <pass>
+    <loader>$PROJ_DIR$\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash</loader>
+    <range>CODE 0x8000020 0x8003fff</range>
+    <abs_offset>0x20</abs_offset>
+    <args>--boot   </args>
+  </pass>
+  <pass>
+    <loader>$PROJ_DIR$\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash</loader>
+    <range>CODE 0x10002000 0x10004fff</range>
+    <abs_offset>0x0</abs_offset>
+    <args>--concat   
+   --boot   </args>
+  </pass>
+  <ignore>CODE 0x00000000 0x0007ffff</ignore>
+  <ignore>CODE 0x10000000 0x10001fff</ignore>
+  <ignore>CODE 0x10005000 0x10006000</ignore>
+</flash_board>
+
+

component/soc/realtek/8711b/misc/iar_utility/common/flashloader/FlashRTL8195aQA.board

@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<flash_board>
+  <pass>
+  	<range>CODE 0x200006b4 0x2002FFFF</range>
+    <loader>$PROJ_DIR$\flashloader\FlashRTL8195aQA.flash</loader>   
+    <abs_offset>0x00000000</abs_offset> 
+  </pass>
+  <pass>
+  	<range>CODE 0x30000000 0x301FFFFF</range>
+    <loader>$PROJ_DIR$\flashloader\FlashRTL8195aQA.flash</loader>   
+    <abs_offset>0x00010000</abs_offset> 
+    <ignore>DATA_Z 0x30000000 0x301FFFFF</ignore>
+  </pass>
+  <pass>
+  	<range>CODE 0x20080000 0x200BFFFF</range>
+    <loader>$PROJ_DIR$\flashloader\FlashRTL8195aQA.flash</loader>   
+    <abs_offset>0x00020000</abs_offset>
+    <ignore>DATA_Z 0x20080000 0x200BFFFF</ignore>
+  </pass>  
+  <pass>
+  	<range>CODE 0x00000000 0x00000000</range>
+    <loader>$PROJ_DIR$\flashloader\FlashRTL8195aQA.flash</loader>   
+    <abs_offset>0x00030000</abs_offset>
+  </pass> 
+  <ignore>CODE 0x00000001 0x000BFFFF</ignore>
+  <ignore>CODE 0x20000000 0x200006b3</ignore>
+</flash_board>
+
+

component/soc/realtek/8711b/misc/iar_utility/common/flashloader/FlashRTL8195aQA.flash

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<flash_device>
+  <exe>$PROJ_DIR$\flashloader\FlashRTL8195aQA.out</exe>
+  <flash_base>0x00000000</flash_base>
+  <page>8</page>
+  <block>256 0x1000</block>
+  <macro>$PROJ_DIR$\flashloader\FlashRTL8195aQA.mac</macro>
+  <aggregate>1</aggregate>
+</flash_device>

component/soc/realtek/8711b/misc/iar_utility/common/flashloader/FlashRTL8195aQA.mac

@@ -0,0 +1,60 @@
+setup()
+{
+	__var tmp;
+
+	__hwReset(1);
+
+	__writeMemory32(0x21, 		0x40000014, "Memory");	__delay(10);
+	__writeMemory32(0x1FC00002,     0x40000304, "Memory");	__delay(10);
+	__writeMemory32(0x400,          0x40000250, "Memory");	__delay(10);
+	__writeMemory32(0x0,            0x40000340, "Memory");	__delay(10);
+	__writeMemory32(0xc04,		0x40000230, "Memory");	__delay(10);
+	__writeMemory32(0x1157, 	0x40000210, "Memory");	__delay(10);
+	__writeMemory32(0x110011, 	0x400002c0, "Memory");	__delay(10);
+	__writeMemory32(0xffffffff,     0x40000320, "Memory");	__delay(10);
+        
+	__writeMemory32(0x1, 		0x40005224, "Memory");	__delay(10);
+	__writeMemory32(0x2c8, 		0x40005004, "Memory");	__delay(10);
+	__writeMemory32(0xffffd000,	0x40005008, "Memory");	__delay(10);
+	__delay(3);
+	__writeMemory32(0x22, 		0x40005020, "Memory");	__delay(10);
+	__delay(3);
+	__writeMemory32(0x09032001,	0x40005010, "Memory");	__delay(10);
+	__delay(3);
+	__writeMemory32(0x2611, 	0x40005014, "Memory");	__delay(10);
+	__delay(3);
+	__writeMemory32(0x68413, 	0x40005018, "Memory");	__delay(10);
+	__delay(3);
+	__writeMemory32(0x42, 		0x4000501c, "Memory");	__delay(10);
+	__delay(3);
+        
+        // Enable
+ 	__writeMemory32(0x700, 		0x4000500c, "Memory");	__delay(10);
+	__delay(20);
+	__writeMemory32(0x1, 		0x40005000, "Memory");	__delay(10);
+	__delay(100);
+	tmp = __readMemory32(0x40005000,"Memory");	__delay(10);
+	__writeMemory32(0x600, 		0x4000500c, "Memory");	__delay(10);
+	__delay(30);  
+}
+
+execUserPreload()
+{
+	__message "----- Prepare hardware for Flashloader -----\n";
+	setup();
+	__writeMemory32(0x80000000, 0x40000218, "Memory");
+}
+
+execUserSetup()
+{
+	//execUserPreload();
+	//__loadImage("$TARGET_PATH$ ", 0, 0);
+	//__writeMemory32(0x80000000, 0x40000218, "Memory");
+}
+
+execUserFlashInit()  // Called by debugger before loading flash loader in RAM.
+{
+	__message "----- Prepare hardware for Flashloader -----\n";
+	setup();
+	__writeMemory32(0x80000000, 0x40000218, "Memory");
+}

component/soc/realtek/8711b/misc/iar_utility/common/gen_board.bat

@@ -0,0 +1,53 @@
+@set /a tmp = %1-1 
+@call :toHex %tmp% end1
+@set /a tmp2 = %2-1
+@call :toHex %tmp2% end2
+@set /a tmp3 = %3-1
+@call :toHex %tmp3% end0
+
+@echo echo image 2 start %1
+@echo echo image 1 end 0x%end1%
+@echo off
+@echo ^<?xml version="1.0" encoding="iso-8859-1"?^> > tmp.board
+@echo.  >> tmp.board
+@echo ^<flash_board^> >> tmp.board
+@echo   ^<pass^> >> tmp.board
+@echo   	^<range^>CODE %3 0x%end1%^</range^> >> tmp.board
+@echo     ^<loader^>$PROJ_DIR$\..\..\..\component\soc\realtek\8195a\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash^</loader^>    >> tmp.board
+@echo     ^<abs_offset^>0x00000000^</abs_offset^>  >> tmp.board
+@echo     ^<args^>--head^</args^>  >> tmp.board
+@echo   ^</pass^> >> tmp.board
+@echo   ^<pass^> >> tmp.board
+@echo   	^<range^>CODE %1 0x%end2%^</range^> >> tmp.board
+@echo     ^<loader^>$PROJ_DIR$\..\..\..\component\soc\realtek\8195a\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash^</loader^>    >> tmp.board
+@echo     ^<abs_offset^>0x00000000^</abs_offset^> >> tmp.board
+@echo     ^<args^>--cascade^</args^>  >> tmp.board
+@echo   ^</pass^>  >> tmp.board
+@echo   ^<pass^>    >> tmp.board
+@echo   	^<range^>CODE 0x30000000 0x301FFFFF^</range^>    >> tmp.board
+@echo     ^<loader^>$PROJ_DIR$\..\..\..\component\soc\realtek\8195a\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash^</loader^>    >> tmp.board    
+@echo     ^<abs_offset^>0x00000000^</abs_offset^>    >> tmp.board 
+@echo     ^<args^>--cascade^</args^>  >> tmp.board
+@echo   ^</pass^>    >> tmp.board
+@echo   ^<ignore^>CODE 0x00000000 0x000FFFFF^</ignore^> >> tmp.board 
+@echo   ^<ignore^>CODE 0x10000000 0x%end0%^</ignore^> >> tmp.board
+@echo   ^<ignore^>CODE %2 0x1006FFFF^</ignore^> >> tmp.board
+@echo ^</flash_board^> >> tmp.board    >> tmp.board
+
+exit
+
+:toHex dec hex -- convert a decimal number to hexadecimal, i.e. -20 to FFFFFFEC or 26 to 0000001A
+@echo off
+SETLOCAL ENABLEDELAYEDEXPANSION
+set /a dec=%~1
+set "hex="
+set "map=0123456789ABCDEF"
+for /L %%N in (1,1,8) do (
+    set /a "d=dec&15,dec>>=4"
+    for %%D in (!d!) do set "hex=!map:~%%D,1!!hex!"
+)
+
+( ENDLOCAL & REM RETURN VALUES
+    IF "%~2" NEQ "" (SET %~2=%hex%) ELSE ECHO.%hex%
+)
+EXIT /b

component/soc/realtek/8711b/misc/iar_utility/common/gen_board_img2.bat

@@ -0,0 +1,49 @@
+@set /a tmp1 = %1 
+@call :toHex %tmp1% ram_start
+@set /a tmp2 = %2-1
+@call :toHex %tmp2% ram_end
+
+@echo echo image 2 start %1
+@echo echo image 2 end %2
+@echo off
+@echo ^<?xml version="1.0" encoding="iso-8859-1"?^> > tmp.board
+@echo.  >> tmp.board
+@echo ^<flash_board^> >> tmp.board
+@echo   ^<pass^>    >> tmp.board
+@echo     ^<range^>CODE 0x8000000 0x8004fff^</range^>    >> tmp.board
+@echo     ^<loader^>$PROJ_DIR$\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash^</loader^>    >> tmp.board
+@echo     ^<abs_offset^>0x00000000^</abs_offset^>    >> tmp.board
+@echo     ^<args^>--noheader^</args^>  >> tmp.board 
+@echo   ^</pass^>    >> tmp.board
+@echo   ^<pass^> >> tmp.board
+@echo     ^<range^>CODE 0x800b020 0x807ffff^</range^> >> tmp.board
+@echo     ^<loader^>$PROJ_DIR$\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash^</loader^>    >> tmp.board
+@echo     ^<abs_offset^>0xb020^</abs_offset^>  >> tmp.board
+@echo   ^</pass^> >> tmp.board
+@echo   ^<pass^>    >> tmp.board
+@echo     ^<range^>CODE %1 0x%ram_end%^</range^>    >> tmp.board
+@echo     ^<loader^>$PROJ_DIR$\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\flashloader\FlashRTL8195aMP.flash^</loader^>    >> tmp.board  
+@echo     ^<abs_offset^>0xb000^</abs_offset^>  >> tmp.board  
+@echo     ^<args^>--concat^</args^>  >> tmp.board  
+@echo   ^</pass^>    >> tmp.board
+
+@echo   ^<ignore^>CODE %2 0x1003dfff^</ignore^> >> tmp.board
+@echo ^</flash_board^> >> tmp.board    >> tmp.board
+
+exit
+
+:toHex dec hex -- convert a decimal number to hexadecimal, i.e. -20 to FFFFFFEC or 26 to 0000001A
+@echo off
+SETLOCAL ENABLEDELAYEDEXPANSION
+set /a dec=%~1
+set "hex="
+set "map=0123456789ABCDEF"
+for /L %%N in (1,1,8) do (
+    set /a "d=dec&15,dec>>=4"
+    for %%D in (!d!) do set "hex=!map:~%%D,1!!hex!"
+)
+
+( ENDLOCAL & REM RETURN VALUES
+    IF "%~2" NEQ "" (SET %~2=%hex%) ELSE ECHO.%hex%
+)
+EXIT /b

component/soc/realtek/8711b/misc/iar_utility/common/postbuild_img1.bat

@@ -0,0 +1,130 @@
+cd /D %2
+set tooldir=%2\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\tools
+set libdir=%2\..\..\..\component\soc\realtek\8711b\misc\bsp
+
+del Debug\Exe\bootloader.map Debug\Exe\bootloader.asm *.bin
+cmd /c "%tooldir%\nm Debug/Exe/bootloader.axf | %tooldir%\sort > Debug/Exe/bootloader.map"
+cmd /c "%tooldir%\objdump -d Debug/Exe/bootloader.axf > Debug/Exe/bootloader.asm"
+
+for /f "delims=" %%i in ('cmd /c "%tooldir%\grep IMAGE1 Debug/Exe/bootloader.map | %tooldir%\grep Base | %tooldir%\gawk '{print $1}'"') do set ram1_start=0x%%i
+for /f "delims=" %%i in ('cmd /c "%tooldir%\grep IMAGE1 Debug/Exe/bootloader.map | %tooldir%\grep Limit | %tooldir%\gawk '{print $1}'"') do set ram1_end=0x%%i
+
+for /f "delims=" %%i in ('cmd /c "%tooldir%\grep xip_image1 Debug/Exe/bootloader.map | %tooldir%\grep Base | %tooldir%\gawk '{print $1}'"') do set xip_image1_start=0x%%i
+for /f "delims=" %%i in ('cmd /c "%tooldir%\grep xip_image1 Debug/Exe/bootloader.map | %tooldir%\grep Limit | %tooldir%\gawk '{print $1}'"') do set xip_image1_end=0x%%i
+
+::echo ram1_start: %ram1_start% > tmp.txt
+::echo ram1_end: %ram1_end% >> tmp.txt
+::echo xip_image_start: %xip_image1_start% >> tmp.txt
+::echo xip_image1_end: %xip_image1_end% >> tmp.txt
+
+
+
+
+
+
+@echo off&setlocal enabledelayedexpansion
+for /f "delims=:" %%i in ('findstr /n /c:"PLACEMENT" Debug\List\bootloader.map') do (
+   set skipline=%%i
+)
+@echo off&setlocal enabledelayedexpansion
+for /f "delims=:" %%i in ('findstr /n /c:"Kind" Debug\List\bootloader.map') do (
+    set endline=%%i
+)
+set /a line=endline-skipline
+
+@echo off&setlocal enabledelayedexpansion
+set n=0
+(for /f "skip=%skipline% delims=" %%a in (Debug\List\bootloader.map) do (
+set /a n+=1
+if !n! leq %line% echo %%a
+))>bootloader1.txt
+
+(for /f "delims=" %%a in (bootloader1.txt) do (
+set /p="%%a"<nul | find /V "<Block>"
+))>bootloader2.txt
+
+@echo off&setlocal enabledelayedexpansion
+set strstart={
+set strend=}
+set /a m=1
+(for /f "delims=" %%a in (bootloader2.txt) do (
+set /p="%%a"<nul
+echo %%a | find "%strstart%" >nul && set /a m-=1
+echo %%a | find "%strend%" >nul && set /a m+=1
+if !m!==1 (echo.)
+))>bootloader3.txt
+findstr /rg "place" bootloader3.txt > tmp.txt
+
+del bootloader1.txt
+del bootloader2.txt
+del bootloader3.txt
+
+
+
+::findstr /rg "place" Debug\List\bootloader.map > tmp.txt
+setlocal enabledelayedexpansion
+for /f "delims=:" %%i in ('findstr /rg "IMAGE1" tmp.txt') do (
+    set "var=%%i"
+    set "sectname_ram1=!var:~1,2!"
+)
+for /f "delims=:" %%i in ('findstr /rg "xip_image1.text" tmp.txt') do (
+    set "var=%%i"
+    set "sectname_xip1=!var:~1,2!"
+)
+setlocal disabledelayedexpansion
+del tmp.txt
+::echo sectname_ram1: %sectname_ram1% sectname_xip: %sectname_xip1% >tmp.txt
+
+:: pick ram_1.bin
+%tooldir%\objcopy -j "%sectname_ram1% rw" -Obinary Debug/Exe/bootloader.axf Debug/Exe/ram_1.bin
+:: add header
+%tooldir%\pick %ram1_start% %ram1_end% Debug\Exe\ram_1.bin Debug\Exe\ram_1.p.bin boot
+
+:: pick xip_image1.bin
+%tooldir%\objcopy -j "%sectname_xip1% rw" -Obinary Debug/Exe/bootloader.axf Debug/Exe/xip_image1.bin
+:: add header
+%tooldir%\pick %xip_image1_start% %xip_image1_end% Debug\Exe\xip_image1.bin Debug\Exe\xip_image1.p.bin boot
+
+:: aggregate boot_all.bin
+copy /b Debug\Exe\xip_image1.p.bin+Debug\Exe\ram_1.p.bin Debug\Exe\boot_all.bin
+
+:: update boot_all.bin, raw file for application
+copy Debug\Exe\boot_all.bin %libdir%\image\boot_all.bin
+
+::padding boot_all.bin to 32K+4K+4K+4K, LOADER/RSVD/SYSTEM/CALIBRATION
+::%tooldir%\padding 44k 0xFF Debug\Exe\boot_all.bin
+
+:: create bootloader extern symbols
+echo /* Bootloader symbol list */ > bootloader_symbol.icf
+setlocal enabledelayedexpansion
+for /f "tokens=1,2,3 delims= " %%i in ( Debug/Exe/bootloader.map ) do (
+    set "var=%%i"
+    if /i "!var:~7!"=="a" (
+        if %%j==T (echo %%k 0x!var:~0,7!b >> test1.txt)
+    ) else (
+        if  /i "!var:~7!"=="c" (
+            if %%j==T (echo %%k 0x!var:~0,7!d >> test1.txt)
+        ) else (
+            if  /i "!var:~7!"=="e" (
+                if %%j==T (echo %%k 0x!var:~0,7!f >> test1.txt)
+            ) else (
+                set "n=!var:~7!"
+                set /a n+=1
+                if %%j==T (echo %%k 0x!var:~0,7!!n! >> test1.txt)
+            )
+        )
+    )
+)
+for /f "eol=. tokens=1,2" %%i in ( test1.txt ) do echo %%i %%j >> test2.txt
+findstr /v "Region" "test2.txt">>test3.txt
+for /f "eol=_ tokens=1,2" %%i in ( test3.txt ) do echo define exported symbol %%i = %%j; >> bootloader_symbol.icf 
+del test1.txt
+del test2.txt
+del test3.txt
+
+del Debug\Exe\ram_1.bin
+del Debug\Exe\ram_1.p.bin
+del Debug\Exe\xip_image1.bin
+del Debug\Exe\xip_image1.p.bin
+
+exit

component/soc/realtek/8711b/misc/iar_utility/common/postbuild_img1.vbs

@@ -0,0 +1,5 @@
+Dim WshShell
+
+Set WshShell = WScript.CreateObject("WScript.Shell")
+
+WshShell.Run "cmd /c "+WScript.Arguments.Item(1)+"\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\postbuild_img1.bat "+WScript.Arguments.Item(0)+" "+WScript.Arguments.Item(1), 0

component/soc/realtek/8711b/misc/iar_utility/common/postbuild_img2.bat

@@ -0,0 +1,137 @@
+cd /D %2
+set tooldir=%2\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\tools
+set libdir=%2\..\..\..\component\soc\realtek\8711b\misc\bsp
+set ota_bin_ver=0x%date:~0,4%%date:~5,2%%date:~8,2%
+
+::echo input1=%1 >tmp.txt
+::echo input2=%2 >>tmp.txt
+::echo ota_bin_ver=%ota_bin_ver% >>tmp.txt
+ 
+del Debug\Exe\target.map Debug\Exe\application.asm *.bin
+cmd /c "%tooldir%\nm Debug/Exe/application.axf | %tooldir%\sort > Debug/Exe/application.map"
+cmd /c "%tooldir%\objdump -d Debug/Exe/application.axf > Debug/Exe/application.asm"
+
+for /f "delims=" %%i in ('cmd /c "%tooldir%\grep IMAGE2 Debug/Exe/application.map | %tooldir%\grep Base | %tooldir%\gawk '{print $1}'"') do set ram2_start=0x%%i
+for /f "delims=" %%i in ('cmd /c "%tooldir%\grep IMAGE2 Debug/Exe/application.map | %tooldir%\grep Limit | %tooldir%\gawk '{print $1}'"') do set ram2_end=0x%%i
+
+for /f "delims=" %%i in ('cmd /c "%tooldir%\grep xip_image2 Debug/Exe/application.map | %tooldir%\grep Base | %tooldir%\gawk '{print $1}'"') do set xip_image2_start=0x%%i
+for /f "delims=" %%i in ('cmd /c "%tooldir%\grep xip_image2 Debug/Exe/application.map | %tooldir%\grep Limit | %tooldir%\gawk '{print $1}'"') do set xip_image2_end=0x%%i
+
+::echo ram2_start: %ram2_start% > tmp.txt
+::echo ram2_end: %ram2_end% >> tmp.txt
+::echo xip_image2_start: %xip_image2_start% >> tmp.txt
+::echo xip_image2_end: %xip_image2_end% >> tmp.txt
+
+
+@echo off&setlocal enabledelayedexpansion
+for /f "delims=:" %%i in ('findstr /n /c:"PLACEMENT" Debug\List\application.map') do (
+   set skipline=%%i
+)
+@echo off&setlocal enabledelayedexpansion
+for /f "delims=:" %%i in ('findstr /n /c:"Kind" Debug\List\application.map') do (
+    set endline=%%i
+)
+set /a line=endline-skipline
+
+@echo off&setlocal enabledelayedexpansion
+set n=0
+(for /f "skip=%skipline% delims=" %%a in (Debug\List\application.map) do (
+set /a n+=1
+if !n! leq %line% echo %%a
+))>application1.txt
+
+(for /f "delims=" %%a in (application1.txt) do (
+set /p="%%a"<nul | find /V "<Block>"
+))>application2.txt
+
+@echo off&setlocal enabledelayedexpansion
+set strstart={
+set strend=}
+set /a m=1
+(for /f "delims=" %%a in (application2.txt) do (
+set /p="%%a"<nul
+echo %%a | find "%strstart%" >nul && set /a m-=1
+echo %%a | find "%strend%" >nul && set /a m+=1
+if !m!==1 (echo.)
+))>application3.txt
+findstr /rg "place" application3.txt > tmp.txt
+
+del application1.txt
+del application2.txt
+del application3.txt
+
+
+::findstr /rg "place" Debug\List\application.map > tmp.txt
+setlocal enabledelayedexpansion
+for /f "delims=:" %%i in ('findstr /rg "0x1000" tmp.txt') do (
+    set "var=%%i"
+    set "sectname_ram2=!var:~1,2!"
+)
+for /f "delims=:" %%i in ('findstr /rg "xip_image2.text" tmp.txt') do (
+    set "var=%%i"
+    set "sectname_xip=!var:~1,2!"
+)
+for /f "delims=:" %%i in ('findstr /rg "0x1003f000" tmp.txt') do (
+    set "var=%%i"
+    set "sectname_rdp=!var:~1,2!"
+)
+setlocal disabledelayedexpansion
+del tmp.txt
+::echo sectname_ram2: %sectname_ram2% sectname_xip: %sectname_xip% sectname_rdp: %sectname_rdp% >tmp1.txt
+
+%tooldir%\objcopy -j "%sectname_ram2% rw" -Obinary Debug/Exe/application.axf Debug/Exe/ram_2.r.bin
+%tooldir%\objcopy -j "%sectname_xip% rw" -Obinary Debug/Exe/application.axf Debug/Exe/xip_image2.bin
+%tooldir%\objcopy -j "%sectname_rdp% rw" -Obinary Debug/Exe/application.axf Debug/Exe/rdp.bin
+
+:: remove bss sections
+%tooldir%\pick %ram2_start% %ram2_end% Debug\Exe\ram_2.r.bin Debug\Exe\ram_2.bin raw
+del Debug\Exe\ram_2.r.bin
+
+:: add header
+%tooldir%\pick %ram2_start% %ram2_end% Debug\Exe\ram_2.bin Debug\Exe\ram_2.p.bin
+%tooldir%\pick %xip_image2_start% %xip_image2_end% Debug\Exe\xip_image2.bin Debug\Exe\xip_image2.p.bin
+
+:: get ota_idx and ota_offset from image2.icf
+setlocal enabledelayedexpansion
+findstr /rg "__ICFEDIT_region_XIP_OTA1_start__" image2.icf>test.txt
+for /f "tokens=1,2,3,4,5*" %%i in ('findstr /rg "symbol" test.txt') do (
+    set "var=%%m"
+    set "ota_offset=!var:~0,10!"
+)
+setlocal disabledelayedexpansion
+if "%ota_offset%"=="0x0800B000" (  
+    set ota_idx=1
+) else (
+    set ota_idx=2
+)
+del test.txt
+::echo ota_idx=%ota_idx% >tmp.txt
+::echo ota_offset=%ota_offset% >>tmp.txt
+
+:: aggregate image2_all.bin and add checksum
+if "%ota_idx%"=="2" (
+    copy /b Debug\Exe\xip_image2.p.bin+Debug\Exe\ram_2.p.bin Debug\Exe\image2_all_ota2.bin
+    %tooldir%\checksum Debug\Exe\image2_all_ota2.bin
+    %tooldir%\ota Debug\Exe\image2_all_ota1.bin 0x800B000 Debug\Exe\image2_all_ota2.bin %ota_offset% %ota_bin_ver% Debug\Exe\ota_all.bin
+) else (
+    copy /b Debug\Exe\xip_image2.p.bin+Debug\Exe\ram_2.p.bin Debug\Exe\image2_all_ota1.bin
+    %tooldir%\checksum Debug\Exe\image2_all_ota1.bin
+)
+
+del Debug\Exe\ram_2.bin
+del Debug\Exe\ram_2.p.bin
+del Debug\Exe\xip_image2.bin
+del Debug\Exe\xip_image2.p.bin
+
+:: force update boot_all.bin
+del Debug\Exe\boot_all.bin
+
+:: check boot_all.bin exist, copy default
+if not exist Debug\Exe\boot_all.bin (
+	copy %libdir%\image\boot_all.bin Debug\Exe\boot_all.bin
+)
+
+:: board generator
+%tooldir%\..\gen_board_img2.bat %ram2_start% %ram2_end%
+
+exit

component/soc/realtek/8711b/misc/iar_utility/common/postbuild_img2.vbs

@@ -0,0 +1,5 @@
+Dim WshShell
+
+Set WshShell = WScript.CreateObject("WScript.Shell")
+
+WshShell.Run "cmd /c "+WScript.Arguments.Item(1)+"\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\postbuild_img2.bat "+WScript.Arguments.Item(0)+" "+WScript.Arguments.Item(1), 0

component/soc/realtek/8711b/misc/iar_utility/common/prebuild.bat

@@ -0,0 +1,50 @@
+cd /D %1
+set ota_idx=%2
+set ota_offset=%3
+
+:: Generate build_info.h
+::echo off
+::echo %date:~0,10%-%time:~0,8%
+::echo %USERNAME%
+for /f "usebackq" %%i in (`hostname`) do set hostname=%%i
+::echo %hostname%
+
+echo #define UTS_VERSION "%date:~0,10%-%time:~0,8%" > ..\inc\build_info.h
+echo #define RTL8195AFW_COMPILE_TIME "%date:~0,10%-%time:~0,8%" >> ..\inc\build_info.h
+echo #define RTL8195AFW_COMPILE_DATE "%date:~0,10%" >> ..\inc\build_info.h
+echo #define RTL8195AFW_COMPILE_BY "%USERNAME%" >> ..\inc\build_info.h
+echo #define RTL8195AFW_COMPILE_HOST "%hostname%" >> ..\inc\build_info.h
+echo #define RTL8195AFW_COMPILE_DOMAIN >> ..\inc\build_info.h
+echo #define RTL8195AFW_COMPILER "IAR compiler" >> ..\inc\build_info.h
+
+if "%ota_idx%"=="0" (
+    goto :end
+)
+
+set cf=image2.icf
+if "%ota_idx%"=="2" (
+    set dt=%ota_offset%
+) else (
+    set dt=0x0800B000
+)
+
+findstr /rg "__ICFEDIT_region_XIP_OTA1_start__" %cf%>ttst.txt
+setlocal enabledelayedexpansion
+for /f "tokens=1,2,3,4,5*" %%i in ('findstr /rg "symbol" ttst.txt') do (
+    set "var=%%m"
+    set "st=!var:~0,10!"
+)
+setlocal disabledelayedexpansion
+del ttst.txt
+
+echo /*###ICF### Section handled by ICF editor, don't touch! ****/>root.txt
+setlocal enabledelayedexpansion
+for /f "skip=1 tokens=1,2* delims=@" %%i in ('findstr ".*" %cf%') do (
+    set txt=%%i
+    echo !txt:%st%=%dt%!>>root.txt
+)
+move /y root.txt image2.icf
+
+:end
+exit
+

component/soc/realtek/8711b/misc/iar_utility/common/prebuild.vbs

@@ -0,0 +1,5 @@
+Dim WshShell
+
+Set WshShell = WScript.CreateObject("WScript.Shell")
+
+WshShell.Run "cmd /c "+WScript.Arguments.Item(0)+"\..\..\..\component\soc\realtek\8711b\misc\iar_utility\common\prebuild.bat "+WScript.Arguments.Item(0)+" "+WScript.Arguments.Item(1)+" "+WScript.Arguments.Item(2), 0

component/soc/realtek/8711b/misc/iar_utility/common/preload.mac

@@ -0,0 +1,100 @@
+//DRAM_INFO
+__var DeviceType;
+__var Page;
+__var Bank;
+__var DqWidth;
+
+//DRAM_MODE_REG_INFO
+__var BstLen;
+__var BstType;
+__var Mode0Cas;
+__var Mode0Wr;
+__var Mode1DllEnN;
+__var Mode1AllLat;
+__var Mode2Cwl;
+
+//DRAM_TIMING_INFO, additional parameter, to config DRAM_TIMING INFO
+__var DramTimingTref;
+__var DramRowNum;
+__var Tck;
+
+//DRAM_TIMING_INFO
+__var TrfcPs;
+__var TrefiPs;
+__var WrMaxTck;
+__var TrcdPs; 
+__var TrpPs;
+__var TrasPs;
+__var TrrdTck;
+__var TwrPs;
+__var TwtrTck; 
+__var TmrdTck;
+__var TrtpTck;
+__var TccdTck;
+__var TrcPs;
+
+//DRAM_DEVICE_INFO
+__var DdrPeriodPs;
+__var DfiRate;
+
+__mem_test(){
+	__var i;
+        __var vaddr;
+        __var tmp;
+        
+        i=0;
+        while(i<10){
+            vaddr = 0x30000000+((i*23)&0x1FFFFC);
+            __writeMemory32(0x55AA55AA,	vaddr, "Memory");
+            tmp = __readMemory32(vaddr,"Memory");
+            if(tmp!=0x55AA55AA)
+                return 1;
+            i=i+1;
+        }
+        return 0;
+}
+
+__var ok_pipe_id0;
+__var ok_pipe_id1;
+__var ok_tpc_min0;
+__var ok_tpc_max0;
+__var ok_tpc_min1;
+__var ok_tpc_max1;
+__var tpc0_cnt;
+__var tpc1_cnt;
+
+__setup_system()
+{
+	__var tmp;
+
+	__hwReset(1);
+}
+
+execUserPreload()
+{
+        __message "User execUserPreload....";
+        __setup_system();
+}
+
+execUserSetup()
+{
+	//__var tmp;
+        //__message "User Setup....";
+        // if use normal reset, please unmark those 2 lines
+        //execUserPreload();
+        //__setup_system();
+        //__message "User __loadImage....";
+        //__loadImage("$TARGET_PATH$ ", 0, 0);
+
+}
+
+execUserReset()
+{
+                __var tmp;
+                __message "User Reset....";
+                tmp = __readMemory32(0x40000210, "Memory")&(~(1<<28));
+                tmp = tmp & (~(1<<21));        
+                __writeMemory32(tmp, 0x40000210, "Memory");
+}
+
+

component/soc/realtek/8711b/misc/rtl8710b_freertos_pmu.h

@@ -0,0 +1,47 @@
+#ifndef _FREERTOS_PMU_8710B_H_
+#define _FREERTOS_PMU_8710B_H_
+
+
+
+#define PMU_DEVICE_TIMER_DEFAULT_INTERVAL	2000
+#define PMU_DEVICE_TIMER_MAX_INTERVAL		(1000*30) /* max 30sec */
+
+typedef struct
+{
+	u32					nDeviceId;
+	PSM_HOOK_FUN		sleep_hook_fun;
+	void*				sleep_param_ptr;
+	PSM_HOOK_FUN		wakeup_hook_fun;
+	void*				wakeup_param_ptr;
+}PSM_DD_HOOK_INFO;
+
+typedef struct
+{
+	u32					nDeviceId;
+	PSM_HOOK_FUN		late_resume_hook_fun;
+	void*				late_resume_param_ptr;
+}PSM_DD_DELAY_HOOK_INFO;
+
+/**
+  * @brief  init system active timer for PMU.
+  * @param  none.          
+  * @retval status value:
+  *          - 0: _FAIL
+  *          - 1: _SUCCESS
+  * @note can just used in late resume or later, can not used in wakeup_hook_fun.
+  */
+uint32_t pmu_yield_os_check(void);
+uint32_t pmu_sysactive_timer_init(void);
+void pmu_register_delay_callback(u32 nDeviceId, PSM_HOOK_FUN late_resume_hook_fun, void* late_resume_param_ptr);
+void pmu_unregister_delay_callback(u32 nDeviceId);
+u32 pmu_exec_sleep_hook_funs(void);
+void pmu_exec_wakeup_hook_funs(u32 nDeviceIdMax);
+uint32_t pmu_set_sleep_type(uint32_t type);
+uint32_t pmu_set_delta_tick(float value);
+#if CONFIG_LWIP_LAYER
+ extern uint32_t LWIP_Get_Dynamic_Sleep_Interval();
+#endif
+
+extern u32 tickless_debug;
+extern u32 tick_last_tcp;
+#endif