sdk-ameba-v4.0c_180328/component/soc/realtek/8711b/fwlib/include/rtl8711b_rtc.h

480 lines
16 KiB
C
Raw Permalink Normal View History

2019-04-02 08:34:25 +00:00
/**
******************************************************************************
* @file rtl8711b_rtc.h
* @author
* @version V1.0.0
* @date 2016-05-17
* @brief This file contains all the functions prototypes for the RTC firmware
* library.
******************************************************************************
* @attention
*
* This module is a confidential and proprietary property of RealTek and
* possession or use of this module requires written permission of RealTek.
*
* Copyright(c) 2015, Realtek Semiconductor Corporation. All rights reserved.
******************************************************************************
*/
#ifndef _RTL8711B_RTC_H_
#define _RTL8711B_RTC_H_
/** @addtogroup AmebaZ_Periph_Driver
* @{
*/
/** @defgroup RTC
* @brief RTC driver modules
* @{
*/
/** @addtogroup RTC
* @verbatim
*****************************************************************************************
* Introduction
*****************************************************************************************
* The real-time clock (RTC) is an independent BCD timer/counter.
* One 32-bit register contains the seconds, minutes, hours (12 or 24-hour format)
* expressed in binary coded decimal format (BCD).
* One 32-bit register contains the days expressed in binary format.
* Daylight saving time compensation can also be performed.
* One programmable alarm contains seconds, minutes, hours and days with interrupt function,
* and can be triggered by any combination of the time fields.
* A digital calibration feature is available to compensate for some deviation.
* After backup domain reset, all RTC registers are protected against possible parasitic
* write accesses.
* As long as the supply voltage remains in the operating range, the RTC never stops,
* regardless of the device status (Run mode, low power mode or under reset).
*
*****************************************************************************************
* How to use RTC
*****************************************************************************************
* To use the RTC, the following steps are mandatory:
*
* 1. Initialize the RTC Clock Source.
* RTC_ClockSource()
*
* 2. Fill the variable RTC_InitStruct with default parameters, or set the desired parameters manually:
* RTC_StructInit(&RTC_InitStruct)
*
* 3. configure the RTC peripheral with the corresponding configurations contained in RTC_InitStruct:
* Call RTC_Init(&RTC_InitStruct)
*
* 4. Fill the variable RTC_TimeStruct with default parameters() (Time = 00d:00h:00min:00sec)
* RTC_TimeStructInit(&RTC_TimeStruct)
* setting the desired calendar time parameters manually.
*
* 5. Set calendar time:
* RTC_SetTime(RTC_Format_BIN, &RTC_TimeStruct).
*
* 6. If RTC_OUT output is needed, the pinmux configuration is as follows:
* Pinmux_Config(PinName, PINMUX_FUNCTION_RTCOUT)
*
* RTC_OUT output pinmux:
* S0: PA_30
* S1: PA_16
*
*****************************************************************************************
* How to use Alarm
*****************************************************************************************
* To use the Alarm, the following steps are mandatory:
*
* 1. Configure the RTC as described in the first part of this driver.
*
* 2. Fill the variable RTC_AlarmStruct of type RTC_AlarmTypeDef with default parameters
* RTC_AlarmStructInit(&RTC_AlarmStruct)
* or setting the desired Alarm time parameters manually.
*
* 3. configure Alarm:
* RTC_SetAlarm(RTC_Format_BIN, &RTC_AlarmStruct)
*
* 4. Enable alarm and alarm interrupt.
* RTC_AlarmCmd(ENABLE)
*
* 5. Enable IRQ as follows:
* InterruptRegister(RTC_IntHandler, RTC_IRQ, NULL, 4);
* InterruptEn(RTC_IRQ, 4);
*
* @endverbatim
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup RTC_Exported_Types RTC Exported Types
* @{
*/
/**
* @brief RTC Init structure definition
*/
typedef struct {
u32 RTC_HourFormat; /*!< Specifies the RTC Hour Format.
This parameter can be a value of @ref RTC_Hour_Formats */
u32 RTC_AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
This parameter must be a value of @ref RTC_Asynchronous_Predivider */
u32 RTC_SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
This parameter must be a value of @ref RTC_Synchronous_Predivider */
} RTC_InitTypeDef;
/**
* @brief RTC Time structure definition
*/
typedef struct
{
u16 RTC_Days; /*!< Day in binary format 9bits 0~0x1FF */
u8 RTC_Hours; /*!< Specifies the RTC Time Hour.
This parameter must be set to a value in the 1-12 range
if the RTC_HourFormat_12 is selected or 0-23 range if
the RTC_HourFormat_24 is selected. */
u8 RTC_Minutes; /*!< Specifies the RTC Time Minutes.
This parameter must be set to a value in the 0-59 range. */
u8 RTC_Seconds; /*!< Specifies the RTC Time Seconds.
This parameter must be set to a value in the 0-59 range. */
u8 RTC_H12_PMAM; /*!< Specifies the RTC AM/PM Time.
This parameter can be a value of @ref RTC_AM_PM_Definitions */
}RTC_TimeTypeDef;
/**
* @brief RTC Alarm structure definition
*/
typedef struct
{
RTC_TimeTypeDef RTC_AlarmTime; /*!< Specifies the RTC Alarm Time members. */
u32 RTC_AlarmMask; /*!< Specifies the RTC Alarm1 Masks(H:M:S).
This parameter can be a value of @ref RTC_AlarmMask1_Definitions */
u32 RTC_Alarm2Mask; /*!< Specifies the RTC Alarm2 Masks Day).
This parameter can be a value of @ref RTC_AlarmMask2_Definitions */
}RTC_AlarmTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RTC_Exported_Constants RTC Exported Constants
* @{
*/
/** @defgroup RTC_Input_parameter_format_definitions
* @{
*/
#define RTC_Format_BIN ((u32)0x000000000)
#define RTC_Format_BCD ((u32)0x000000001)
#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_Format_BIN) || ((FORMAT) == RTC_Format_BCD))
/**
* @}
*/
/** @defgroup RTC_Hour_Formats
* @{
*/
#define RTC_HourFormat_24 ((u32)0x00000000)
#define RTC_HourFormat_12 ((u32)0x00000080)
#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HourFormat_12) || \
((FORMAT) == RTC_HourFormat_24))
/**
* @}
*/
/** @defgroup RTC_Asynchronous_Predivider
* @{
*/
#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x1FF)
/**
* @}
*/
/** @defgroup RTC_Synchronous_Predivider
* @{
*/
#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x1FF)
/**
* @}
*/
/** @defgroup RTC_Time_Definitions
* @{
*/
#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0) && ((HOUR) <= 12))
#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23)
#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59)
#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59)
/**
* @}
*/
/** @defgroup RTC_AM_PM_Definitions
* @{
*/
#define RTC_H12_AM ((u8)0x00) //AM or 24-hour format
#define RTC_H12_PM ((u8)0x01) //PM
#define IS_RTC_H12_AMPM(PM) (((PM) == RTC_H12_AM) || ((PM) == RTC_H12_PM))
/**
* @}
*/
/** @defgroup RTC_AlarmMask1_Definitions
* @{
*/
#define RTC_AlarmMask_None ((u32)0x00000000)
#define RTC_AlarmMask_Hours ((u32)0x00800000)
#define RTC_AlarmMask_Minutes ((u32)0x00008000)
#define RTC_AlarmMask_Seconds ((u32)0x00000080)
#define RTC_AlarmMask_All ((u32)0x00808080)
#define IS_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F) == 0)
/**
* @}
*/
/** @defgroup RTC_AlarmMask2_Definitions
* @{
*/
#define RTC_Alarm2Mask_None ((u32)0x00000000)
#define RTC_Alarm2Mask_Days ((u32)0x00000200)
#define IS_ALARM2_MASK(MASK) (((MASK) & ~RTC_Alarm2Mask_Days) == 0)
/**
* @}
*/
/** @defgroup RTC_Alarms_Definitions
* @{
*/
#define RTC_Alarm ((u32)0x00000100)
#define IS_RTC_ALARM(ALARM) ((ALARM) == RTC_Alarm)
#define IS_RTC_CMD_ALARM(ALARM) (((ALARM) & RTC_Alarm) != (u32)0)
/**
* @}
*/
/** @defgroup RTC_Alarms_Interrupt_Definitions
* @{
*/
#define RTC_Alarm_IntEn ((u32)0x00001000)
/**
* @}
*/
/** @defgroup RTC_DayLightSaving_Definitions
* @{
*/
#define RTC_DayLightSaving_SUB1H ((u32)0x00000002)
#define RTC_DayLightSaving_ADD1H ((u32)0x00000001)
#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DayLightSaving_SUB1H) || \
((SAVE) == RTC_DayLightSaving_ADD1H))
#define RTC_StoreOperation_Reset ((u32)0x00000000)
#define RTC_StoreOperation_Set ((u32)0x00000004)
#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_StoreOperation_Reset) || \
((OPERATION) == RTC_StoreOperation_Set))
/**
* @}
*/
/** @defgroup RTC_Output_selection_Definitions
* @{
*/
#define RTC_Output_Disable ((u32)0x00000000)
#define RTC_Output_Alarm ((u32)0x00000020) ////wakeup
#define RTC_Output_clkspre ((u32)0x00000040) ////1Hz
#define RTC_Output_clkapre ((u32)0x00000060) ////256Hz
#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_Output_Disable) || \
((OUTPUT) == RTC_Output_Alarm) || \
((OUTPUT) == RTC_Output_clkspre) || \
((OUTPUT) == RTC_Output_clkapre))
/**
* @}
*/
/** @defgroup RTC_Smooth_Calibration_Definitions
* @{
*/
#define RTC_CalibPeriod_1MIN ((u32)0x00000000)
#define RTC_CalibPeriod_2MIN ((u32)0x00010000)
#define RTC_CalibPeriod_3MIN ((u32)0x00020000)
#define RTC_CalibPeriod_4MIN ((u32)0x00030000)
#define RTC_CalibPeriod_5MIN ((u32)0x00040000)
#define RTC_CalibPeriod_6MIN ((u32)0x00050000)
#define RTC_CalibPeriod_7MIN ((u32)0x00060000)
#define RTC_CalibPeriod_8MIN ((u32)0x00070000)
#define IS_RTC_CALIB_PERIOD(DCP) (((DCP) == RTC_CalibPeriod_1MIN) || \
((DCP) == RTC_CalibPeriod_2MIN) || \
((DCP) == RTC_CalibPeriod_3MIN) || \
((DCP) == RTC_CalibPeriod_4MIN) || \
((DCP) == RTC_CalibPeriod_5MIN) || \
((DCP) == RTC_CalibPeriod_6MIN) || \
((DCP) == RTC_CalibPeriod_7MIN) || \
((DCP) == RTC_CalibPeriod_8MIN))
#define RTC_Calib_Disable ((u32)0x00000000)
#define RTC_Calib_Enable ((u32)0x00008000)
#define IS_RTC_CALIB_ENABLE(DCE) (((DCE) == RTC_Calib_Disable) || \
((DCE) == RTC_Calib_Enable))
#define RTC_CalibSign_Positive ((u32)0x00000000)
#define RTC_CalibSign_Negative ((u32)0x00004000)
#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CalibSign_Positive) || \
((SIGN) == RTC_CalibSign_Negative))
#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) <= 0x7F)
/**
* @}
*/
/**
* @}
*/
/** @defgroup RTC_Exported_Functions RTC Exported Functions
* @{
*/
_LONG_CALL_ void RTC_BypassShadowCmd(u32 NewState);
_LONG_CALL_ void RTC_StructInit(RTC_InitTypeDef* RTC_InitStruct);
_LONG_CALL_ u32 RTC_Init(RTC_InitTypeDef* RTC_InitStruct);
_LONG_CALL_ void RTC_TimeStructInit(RTC_TimeTypeDef* RTC_TimeStruct);
_LONG_CALL_ u32 RTC_SetTime(u32 RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct);
_LONG_CALL_ void RTC_GetTime(u32 RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct);
_LONG_CALL_ u32 RTC_SetAlarm(u32 RTC_Format, RTC_AlarmTypeDef* RTC_AlarmStruct);
_LONG_CALL_ void RTC_AlarmStructInit(RTC_AlarmTypeDef* RTC_AlarmStruct);
_LONG_CALL_ void RTC_GetAlarm(u32 RTC_Format, RTC_AlarmTypeDef* RTC_AlarmStruct);
_LONG_CALL_ void RTC_AlarmCmd(u32 NewState);
_LONG_CALL_ void RTC_AlarmClear(void);
_LONG_CALL_ void RTC_DayLightSavingConfig(u32 RTC_DayLightSaving, u32 RTC_StoreOperation);
_LONG_CALL_ u32 RTC_GetStoreOperation(void);
_LONG_CALL_ void RTC_OutputConfig(u32 RTC_Output);
_LONG_CALL_ u32 RTC_SmoothCalibConfig(u32 CalibSign, u32 Value, u32 CalibPeriod, u32 Calib_Enable);
/**
* @}
*/
/* Registers Definitions --------------------------------------------------------*/
/**************************************************************************//**
* @defgroup RTC_Register_Definitions RTC Register Definitions
* @{
*****************************************************************************/
/**************************************************************************//**
* @defgroup RTC_TR
* @{
*****************************************************************************/
#define RTC_TR_DAY ((u32)0xFF800000)
#define RTC_TR_PM ((u32)0x00400000)
#define RTC_TR_HT ((u32)0x00300000)
#define RTC_TR_HU ((u32)0x000F0000)
#define RTC_TR_MNT ((u32)0x00007000)
#define RTC_TR_MNU ((u32)0x00000F00)
#define RTC_TR_ST ((u32)0x00000070)
#define RTC_TR_SU ((u32)0x0000000F)
/** @} */
/**************************************************************************//**
* @defgroup RTC_CR
* @{
*****************************************************************************/
#define RTC_CR_ALRAIE ((u32)0x00001000)
#define RTC_CR_ALRAE ((u32)0x00000100)
#define RTC_CR_FMT ((u32)0x00000080)
#define RTC_CR_OSEL ((u32)0x00000060)
#define RTC_CR_BYPSHAD ((u32)0x00000008)
#define RTC_CR_BCK ((u32)0x00000004)
#define RTC_CR_SUB1H ((u32)0x00000002)
#define RTC_CR_ADD1H ((u32)0x00000001)
/** @} */
/**************************************************************************//**
* @defgroup RTC_ISR
* @{
*****************************************************************************/
#define RTC_ISR_RECALPF ((u32)0x00010000)
#define RTC_ISR_ALRAF ((u32)0x00000100)
#define RTC_ISR_INIT ((u32)0x00000080)
#define RTC_ISR_INITF ((u32)0x00000040)
#define RTC_ISR_RSF ((u32)0x00000020)
#define RTC_ISR_INITS ((u32)0x00000010)
#define RTC_ISR_ALMWF ((u32)0x00000001)
/** @} */
/**************************************************************************//**
* @defgroup RTC_PRER
* @{
*****************************************************************************/
#define RTC_PRER_PREDIV_A ((u32)0x01FF0000)
#define RTC_PRER_PREDIV_S ((u32)0x000001FF)
/** @} */
/**************************************************************************//**
* @defgroup RTC_CALIBR
* @{
*****************************************************************************/
#define RTC_CALIBR_CALP ((u32)0x00070000)
#define RTC_CALIBR_DCE ((u32)0x00008000)
#define RTC_CALIBR_DCS ((u32)0x00004000)
#define RTC_CALIBR_DC ((u32)0x0000007F)
/** @} */
/**************************************************************************//**
* @defgroup RTC_ALRMAR
* @{
*****************************************************************************/
#define RTC_ALRMAR_MSK2 ((u32)0x00800000)
#define RTC_ALRMAR_PM ((u32)0x00400000)
#define RTC_ALRMAR_HT ((u32)0x00300000)
#define RTC_ALRMAR_HU ((u32)0x000F0000)
#define RTC_ALRMAR_MSK1 ((u32)0x00008000)
#define RTC_ALRMAR_MNT ((u32)0x00007000)
#define RTC_ALRMAR_MNU ((u32)0x00000F00)
#define RTC_ALRMAR_MSK0 ((u32)0x00000080)
#define RTC_ALRMAR_ST ((u32)0x00000070)
#define RTC_ALRMAR_SU ((u32)0x0000000F)
/** @} */
/**************************************************************************//**
* @defgroup RTC_ALRMBR
* @{
*****************************************************************************/
#define RTC_ALRMBR_MSK3 ((u32)0x00000200)
#define RTC_ALRMBR_DT ((u32)0x000001FF)
/** @} */
/**************************************************************************//**
* @defgroup RTC_WPR
* @{
*****************************************************************************/
#define RTC_WPR_KEY ((u32)0x000000FF)
/** @} */
/** @} */
/**
* @}
*/
/**
* @}
*/
/* Masks Definition */
#define RTC_TR_RESERVED_MASK ((u32)0xFFFF7F7F)
#define INITMODE_TIMEOUT ((u32) 0x00010000)
#define SYNCHRO_TIMEOUT ((u32) 0x00020000)
#define RECALPF_TIMEOUT ((u32) 0x00020000)
#define ALARMDIS_TIMEOUT ((u32) 0x00020000)
#define RTC_DIV_XTAL_MASK ((u32) 0x07FF0000)
#endif //_RTL8711B_RTC_H_
/******************* (C) COPYRIGHT 2016 Realtek Semiconductor *****END OF FILE****/