sleep extended functions More...

Data Structures
struct	_SLEEP_WKUP_EVENT_

Functions
void	deepsleep_ex (uint32_t wakeup_event, uint32_t sleep_duration)
	To make the system entering the Deep Sleep power saving mode. The CPU, memory and peripheral power is off when entering deep sleep power saving mode. The program needs to be reload and all peripheral needs be re-configure when system resume. More...

void	standby_wakeup_event_del (uint32_t wakeup_event)
	To delete a wake up event for wakeing up the system from the deep standby power saving mode. More...

Ameba1 Only
typedef struct _SLEEP_WKUP_EVENT_	SLEEP_WAKEUP_EVENT

typedef struct _SLEEP_WKUP_EVENT_ *	PSLEEP_WAKEUP_EVENT

void	deepstandby_ex (void)
	To make the system entering the Deep Standby power saving. The CPU, memory and part fo peripheral power is off when entering deep standby power saving mode. The program needs to be reload from the flash at system resume. More...

void	standby_wakeup_event_add (uint32_t wakeup_event, uint32_t sleep_duration_ms, uint32_t gpio_active)
	To add a wake up event to wake up the system from the deep standby power saving mode. More...

#define	SLEEP_WAKEUP_BY_GTIMER (SLP_GTIMER)

#define	SLEEP_WAKEUP_BY_NFC (SLP_NFC)

#define	STANDBY_WAKEUP_BY_NFC (BIT1)

#define	STANDBY_WAKEUP_BY_PA5 (BIT4)

#define	STANDBY_WAKEUP_BY_PC7 (BIT5)

#define	STANDBY_WAKEUP_BY_PD5 (BIT6)

#define	STANDBY_WAKEUP_BY_PE3 (BIT7)

AmebaZ Only
void	deepstandby_ex (uint32_t sleep_duration_ms)
	To make the system entering the Deep Standby power saving. The CPU, memory and part fo peripheral power is off when entering deep standby power saving mode. The program needs to be reload from the flash at system resume. More...

void	standby_wakeup_event_add (uint32_t wakeup_event, uint32_t gpio_active)
	To add a wake up event to wake up the system from the deep standby power saving mode. More...

#define	SLEEP_WAKEUP_BY_STIMER (SLP_STIMER)

#define	SLEEP_WAKEUP_BY_STIMER (BIT_SYSON_WEVT_SYSTIM_MSK)

#define	SLEEP_WAKEUP_BY_GPIO_INT (SLP_GPIO)

#define	SLEEP_WAKEUP_BY_GPIO_INT (BIT_SYSON_WEVT_GPIO_MSK)

#define	SLEEP_WAKEUP_BY_WLAN (SLP_WL)

#define	SLEEP_WAKEUP_BY_WLAN (BIT_SYSON_WEVT_WLAN_MSK)

#define	SLEEP_WAKEUP_BY_SDIO (SLP_SDIO)

#define	SLEEP_WAKEUP_BY_SDIO (BIT_SYSON_WEVT_SDIO_MSK)

#define	SLEEP_WAKEUP_BY_USB (SLP_USB)

#define	SLEEP_WAKEUP_BY_USB (BIT_SYSON_WEVT_USB_MSK)

#define	STANDBY_WAKEUP_BY_STIMER (BIT0)

#define	STANDBY_WAKEUP_BY_STIMER (BIT_SYSON_WEVT_A33_AND_A33GPIO_MSK)

#define	DSLEEP_WAKEUP_BY_TIMER (DS_TIMER33)

#define	DSLEEP_WAKEUP_BY_TIMER BIT(0)

#define	DSLEEP_WAKEUP_BY_GPIO (DS_GPIO)

#define	DSLEEP_WAKEUP_BY_GPIO BIT(2)

#define	SLEEP_WAKEUP_BY_GPIO (BIT_SYSON_WEVT_GPIO_DSTBY_MSK)

#define	SLEEP_WAKEUP_BY_UART (BIT_SYSON_WEVT_UART0_MSK \| BIT_SYSON_WEVT_UART1_MSK)

#define	SLEEP_WAKEUP_BY_I2C (BIT_SYSON_WEVT_I2C0_MSK \| BIT_SYSON_WEVT_I2C1_MSK)

#define	SLEEP_WAKEUP_BY_RTC (BIT_SYSON_WEVT_RTC_MSK)

#define	STANDBY_WAKEUP_BY_GPIO (BIT_SYSON_WEVT_GPIO_DSTBY_MSK)

#define	STANDBY_WAKEUP_BY_RTC (BIT_SYSON_WEVT_RTC_MSK)

Ameba Common
void	sleep_ex (uint32_t wakeup_event, uint32_t sleep_duration)
	To make the system entering the Clock Gated power saving. This function just make the system to enter the clock gated power saving mode and pending on wake up event waitting. The user application need to configure the peripheral to generate system wake up event, like GPIO interrupt, G-Timer timeout, etc. befor entering power saving mode. More...

void	sleep_ex_selective (uint32_t wakeup_event, uint32_t sleep_duration, uint32_t clk_sourec_enable, uint32_t sdr_enable)
	To make the system entering the Clock Gated power saving. This function just make the system to enter the clock gated power saving mode and pending on wake up event waitting. The user application need to configure the peripheral to generate system wake up event, like GPIO interrupt , G-Timer timeout, etc. befor entering power saving mode. More...

Detailed Description

sleep extended functions

Function Documentation

void deepsleep_ex	(	uint32_t	wakeup_event,
		uint32_t	sleep_duration
	)

To make the system entering the Deep Sleep power saving mode. The CPU, memory and peripheral power is off when entering deep sleep power saving mode. The program needs to be reload and all peripheral needs be re-configure when system resume.

Parameters

wakeup_event	A bit map of wake up event. This parameter can be any combination of the following values: DSLEEP_WAKEUP_BY_TIMER DSLEEP_WAKEUP_BY_GPIO
sleep_duration	the system sleep duration in ms, only valid for DSLEEP_WAKEUP_BY_TIMER wake up event.

Return values

None

void deepstandby_ex ( void )

To make the system entering the Deep Standby power saving. The CPU, memory and part fo peripheral power is off when entering deep standby power saving mode. The program needs to be reload from the flash at system resume.

Return values

None

void deepstandby_ex ( uint32_t sleep_duration_ms )

To make the system entering the Deep Standby power saving. The CPU, memory and part fo peripheral power is off when entering deep standby power saving mode. The program needs to be reload from the flash at system resume.

Parameters

sleep_duration_ms the system sleep duration in ms, only valid for STANDBY_WAKEUP_BY_STIMER wake up event.

Return values

None

void sleep_ex	(	uint32_t	wakeup_event,
		uint32_t	sleep_duration
	)

To make the system entering the Clock Gated power saving. This function just make the system to enter the clock gated power saving mode and pending on wake up event waitting. The user application need to configure the peripheral to generate system wake up event, like GPIO interrupt, G-Timer timeout, etc. befor entering power saving mode.

Parameters

wakeup_event	A bit map of wake up event. This parameter can be any combination of the following values: SLEEP_WAKEUP_BY_STIMER SLEEP_WAKEUP_BY_GTIMER SLEEP_WAKEUP_BY_GPIO_INT SLEEP_WAKEUP_BY_WLAN SLEEP_WAKEUP_BY_SDIO SLEEP_WAKEUP_BY_USB SLEEP_WAKEUP_BY_GPIO SLEEP_WAKEUP_BY_UART SLEEP_WAKEUP_BY_I2C SLEEP_WAKEUP_BY_RTC SLEEP_WAKEUP_BY_RESETPIN
sleep_duration	the system sleep duration in ms, only valid for SLEEP_WAKEUP_BY_STIMER wake up event.

Return values

None

void sleep_ex_selective	(	uint32_t	wakeup_event,
		uint32_t	sleep_duration,
		uint32_t	clk_sourec_enable,
		uint32_t	sdr_enable
	)

To make the system entering the Clock Gated power saving. This function just make the system to enter the clock gated power saving mode and pending on wake up event waitting. The user application need to configure the peripheral to generate system wake up event, like GPIO interrupt , G-Timer timeout, etc. befor entering power saving mode.

Parameters

wakeup_event	A bit map of wake up event. This parameter can be any combination of the following values: SLEEP_WAKEUP_BY_STIMER SLEEP_WAKEUP_BY_GTIMER SLEEP_WAKEUP_BY_GPIO_INT SLEEP_WAKEUP_BY_WLAN SLEEP_WAKEUP_BY_SDIO SLEEP_WAKEUP_BY_USB SLEEP_WAKEUP_BY_GPIO SLEEP_WAKEUP_BY_UART SLEEP_WAKEUP_BY_I2C SLEEP_WAKEUP_BY_RTC SLEEP_WAKEUP_BY_RESETPIN
sleep_duration	the system sleep duration in ms, only valid for SLEEP_WAKEUP_BY_STIMER wake up event.
clk_sourec_enable	the option for SCLK on(1)/off(0)
sdr_enable	the option for turn off the SDR controller (1:off, 0:on)

Return values

None

void standby_wakeup_event_add	(	uint32_t	wakeup_event,
		uint32_t	sleep_duration_ms,
		uint32_t	gpio_active
	)

To add a wake up event to wake up the system from the deep standby power saving mode.

Parameters

wakeup_event	A bit map of wake up event. This parameter can be any combination of the following values: STANDBY_WAKEUP_BY_STIMER STANDBY_WAKEUP_BY_GPIO STANDBY_WAKEUP_BY_RTC STANDBY_WAKEUP_BY_RESETPIN
sleep_duration_ms	the system sleep duration in ms, only valid for STANDBY_WAKEUP_BY_STIMER wake up event.
gpio_option	for a GPIO pin to wake up the system by goes high or low This parameter can be any combination of the following values: WAKEUP_BY_GPIO_NONE WAKEUP_BY_GPIO_WAKEUP0_LOW WAKEUP_BY_GPIO_WAKEUP0_HIG WAKEUP_BY_GPIO_WAKEUP1_LOW WAKEUP_BY_GPIO_WAKEUP1_HIG WAKEUP_BY_GPIO_WAKEUP2_LOW WAKEUP_BY_GPIO_WAKEUP2_HIG WAKEUP_BY_GPIO_WAKEUP3_LOW WAKEUP_BY_GPIO_WAKEUP3_HIG

Return values

None

void standby_wakeup_event_add	(	uint32_t	wakeup_event,
		uint32_t	gpio_active
	)

To add a wake up event to wake up the system from the deep standby power saving mode.

Parameters

wakeup_event	A bit map of wake up event. This parameter can be any combination of the following values: STANDBY_WAKEUP_BY_STIMER STANDBY_WAKEUP_BY_GPIO STANDBY_WAKEUP_BY_RTC STANDBY_WAKEUP_BY_RESETPIN
gpio_option	for a GPIO pin to wake up the system by goes high or low This parameter can be any combination of the following values: WAKEUP_BY_GPIO_NONE WAKEUP_BY_GPIO_WAKEUP0_LOW WAKEUP_BY_GPIO_WAKEUP0_HIG WAKEUP_BY_GPIO_WAKEUP1_LOW WAKEUP_BY_GPIO_WAKEUP1_HIG WAKEUP_BY_GPIO_WAKEUP2_LOW WAKEUP_BY_GPIO_WAKEUP2_HIG WAKEUP_BY_GPIO_WAKEUP3_LOW WAKEUP_BY_GPIO_WAKEUP3_HIG

Return values

None

void standby_wakeup_event_del ( uint32_t wakeup_event )

To delete a wake up event for wakeing up the system from the deep standby power saving mode.

Parameters

wakeup_event

A bit map of wake up event. This parameter can be any combination of the following values:

STANDBY_WAKEUP_BY_STIMER
STANDBY_WAKEUP_BY_GPIO
STANDBY_WAKEUP_BY_RTC
STANDBY_WAKEUP_BY_RESETPIN

Return values

None

Data Structures

Functions

Ameba1 Only

AmebaZ Only

Ameba Common

Detailed Description

Function Documentation