initial commit

component/common/example/high_load_memory_use/readme.txt

@@ -0,0 +1,41 @@
+HIGH-LOAD USE CASE MEMORY USAGE EXAMPLE
+
+Description:
+Example to monitor the memory usage for high-load use case.
+Includes:
+	- 3 TLS sessions
+	- 6 UDP sessions including 5 UDP servers on different ports and 1 UDP client
+
+Configuration:
+[platform_opts.h]
+	#define CONFIG_EXAMPLE_WLAN_FAST_CONNECT	0
+	#define CONFIG_EXAMPLE_HIGH_LOAD_MEMORY_USE	1
+[lwipopts.h]
+	#define MEMP_NUM_NETCONN		20
+	#define MEMP_NUM_UDP_PCB		MEMP_NUM_NETCONN
+[FreeRTOSConfig.h]
+	// Configure this if the heap size is not enough
+	#define configTOTAL_HEAP_SIZE		( ( size_t ) ( 80 * 1024 ) )
+
+Execution:
+The example thread will be started automatically when booting.
+You may need to change the IP/Port used in this example to make it work properly.
+To verify the TLS sessions, you can setup an apache server for yourself and make sure the KeepAliveTimeout is larger than 5s.
+To verify UDP server session, you can use iperf with following command to send UDP data:
+	$ iperf.exe -c 192.168.1.123 -u -p 6001 -t 30 -i 1
+To verify UDP client session, you can use iperf with following command to start UDP server:
+	$ iperf.exe -s -p 6001 -u -i 1
+
+Note:
+Example work flow:
+	Start heap monitor thread
+	-> Enable Wi-Fi with STA mode
+	-> Connect to AP by WPA2-AES
+	-> Start 3 TLS sessions
+	-> Start 6 UDP sessions
+
+If you want to use ECDHE as TLS cipher suite, you can modify:
+[config_rsa.h]
+	#define POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED
+	#define POLARSSL_ECDH_C
+	#define POLARSSL_ECP_C