rtl8710_Raw_Packets/project/inc/platform_opts.h

/**
 ******************************************************************************
 *This file contains general configurations for ameba platform
 ******************************************************************************
*/
#ifndef __PLATFORM_OPTS_H__
#define __PLATFORM_OPTS_H__

/*For MP mode setting*/
#define SUPPORT_MP_MODE			0

/**
 * For AT cmd Log service configurations
 */
#define SUPPORT_LOG_SERVICE	0
#if SUPPORT_LOG_SERVICE
#define LOG_SERVICE_BUFLEN     100 //can't larger than UART_LOG_CMD_BUFLEN(127)
#define CONFIG_LOG_HISTORY	0
#if CONFIG_LOG_HISTORY
#define LOG_HISTORY_LEN    5
#endif
#define SUPPORT_INTERACTIVE_MODE 0 //on/off wifi_interactive_mode
#define CONFIG_LOG_SERVICE_LOCK 0
#endif

/**
 * For interactive mode configurations, depends on log service
 */
#if SUPPORT_INTERACTIVE_MODE
#define CONFIG_INTERACTIVE_MODE		1
#define CONFIG_INTERACTIVE_EXT		0
#else
#define CONFIG_INTERACTIVE_MODE		0
#define CONFIG_INTERACTIVE_EXT		0
#endif

/**
 * For FreeRTOS tickless configurations
 */
#define FREERTOS_PMU_TICKLESS_PLL_RESERVED   0   // In sleep mode, 0: close PLL clock, 1: reserve PLL clock
#define FREERTOS_PMU_TICKLESS_SUSPEND_SDRAM  1   // In sleep mode, 1: suspend SDRAM, 0: no act

/******************************************************************************/

/**
* For common flash usage  
*/
#define AP_SETTING_SECTOR		0x000FE000
#define UART_SETTING_SECTOR		0x000FC000
#define FAST_RECONNECT_DATA 	(0x80000 - 0x1000)

/**
 * For Wlan configurations
 */
#define CONFIG_WLAN			1
#if CONFIG_WLAN
#define CONFIG_LWIP_LAYER	1
#define CONFIG_AT_USR			1	// add pvxx
//#define CONFIG_AT_LWIP 		1	// add pvxx
//#define CONFIG_AT_SYS  		1	// add pvxx
//#define CONFIG_AT_WIFI 		1	// add pvxx
#define CONFIG_INIT_NET		1 	// init lwip layer when start up
#define CONFIG_WIFI_IND_USE_THREAD	0	// wifi indicate worker thread

//on/off relative commands in log service
#define CONFIG_SSL_CLIENT	0
#define CONFIG_WEBSERVER	0
#define CONFIG_OTA_UPDATE	1
#define CONFIG_BSD_TCP		1	//NOTE : Enable CONFIG_BSD_TCP will increase about 11KB code size
#define CONFIG_AIRKISS		0	//on or off tencent airkiss
#define CONFIG_UART_SOCKET	0 	// Set: CONFIG_UART_EN, CONFIG_UART_SOCKET
#define CONFIG_UART_XMODEM	0	//support uart xmodem upgrade or not
#define CONFIG_TRANSPORT	0	//on or off the at command for transport socket

/* For WPS and P2P */
#define CONFIG_ENABLE_WPS		1 //SK Hack
#define CONFIG_ENABLE_P2P		1 //SK Hack
#if CONFIG_ENABLE_P2P
#define CONFIG_ENABLE_WPS_AP		1
#undef CONFIG_WIFI_IND_USE_THREAD
#define CONFIG_WIFI_IND_USE_THREAD	1
#endif
#if (CONFIG_ENABLE_P2P && ((CONFIG_ENABLE_WPS_AP == 0) || (CONFIG_ENABLE_WPS == 0)))
#error "If CONFIG_ENABLE_P2P, need to define CONFIG_ENABLE_WPS_AP 1" 
#endif

/* For Simple Link */
#define CONFIG_INCLUDE_SIMPLE_CONFIG		0

/*For wowlan service settings*/
#define CONFIG_WOWLAN_SERVICE           	0

#endif //end of #if CONFIG_WLAN
/*******************************************************************************/

/**
 * For Ethernet configurations
 */
#define CONFIG_ETHERNET 	0
#if CONFIG_ETHERNET

#define CONFIG_LWIP_LAYER	1
#define CONFIG_INIT_NET     1	//init lwip layer when start up

//on/off relative commands in log service
#define CONFIG_SSL_CLIENT	0
#define CONFIG_BSD_TCP		0	//NOTE : Enable CONFIG_BSD_TCP will increase about 11KB code size

#endif


/**
 * For iNIC configurations
 */
#ifdef CONFIG_INIC 				//this flag is defined in IAR project
#define CONFIG_INIC_EN 		1	//enable iNIC mode
#undef CONFIG_ENABLE_WPS
#define CONFIG_ENABLE_WPS 	1
#undef CONFIG_INCLUDE_SIMPLE_CONFIG
#define CONFIG_INCLUDE_SIMPLE_CONFIG	1
#undef CONFIG_WOWLAN_SERVICE
#define CONFIG_WOWLAN_SERVICE 1
#undef LOG_SERVICE_BUFLEN
#define LOG_SERVICE_BUFLEN 	256
#undef CONFIG_LWIP_LAYER
#define CONFIG_LWIP_LAYER	0
#undef CONFIG_OTA_UPDATE
#define CONFIG_OTA_UPDATE 	0
#undef CONFIG_EXAMPLE_WLAN_FAST_CONNECT
#define CONFIG_EXAMPLE_WLAN_FAST_CONNECT 0
#define CONFIG_INIC_SDIO_HCI	1 //for SDIO or USB iNIC
#define CONFIG_INIC_USB_HCI		0
#define CONFIG_INIC_CMD_RSP     1 //need to return msg to host
#endif
/******************End of iNIC configurations*******************/

/* For UART Module AT command example */
#define CONFIG_EXAMPLE_UART_ATCMD			0
#if CONFIG_EXAMPLE_UART_ATCMD
#undef FREERTOS_PMU_TICKLESS_PLL_RESERVED
#define FREERTOS_PMU_TICKLESS_PLL_RESERVED  1
#undef CONFIG_OTA_UPDATE
#define CONFIG_OTA_UPDATE 	1
#undef CONFIG_TRANSPORT
#define CONFIG_TRANSPORT 	1
#undef LOG_SERVICE_BUFLEN
#define LOG_SERVICE_BUFLEN 1600
#undef CONFIG_LOG_SERVICE_LOCK
#define CONFIG_LOG_SERVICE_LOCK 1
#else
#define CONFIG_EXAMPLE_WLAN_FAST_CONNECT 0
#endif

//#define CONFIG_EXAMPLE_UART_ADAPTER 1
//#define CONFIG_EXAMPLE_MDNS
#define USE_FLASH_EEP 1
#define CONFIG_WLAN_CONNECT_CB 1

//#define CONFIG_FATFS_EN	1 // FatFs & SD

#ifdef CONFIG_FATFS_EN
// fatfs version
#define FATFS_R_10C
// fatfs disk interface
#define FATFS_DISK_USB	0
#define FATFS_DISK_SD 	1
#undef CONFIG_SDIO_HOST_EN
#define CONFIG_SDIO_HOST_EN   1
#endif

#endif // __PLATFORM_OPTS_H__