rtl8710_Raw_Packets/flasher/gdb_wrfile.jlink

###############
# FlasherInit #
###############
define FlasherInit
set $rtl8710_flasher_capacity = 0
set $rtl8710_flasher_auto_erase = 1
set $rtl8710_flasher_auto_verify = 1
set $rtl8710_flasher_firmware_ptr = 0x10001000
set $rtl8710_flasher_buffer = 0x10008000
set $rtl8710_flasher_buffer_size = 421888
set $rtl8710_flasher_sector_size = 4096
set $rtl8710_flasher_auto_erase_sector = 0xFFFFFFFF
end
###############
# FlasherWait #
###############
define FlasherWait
set $fresult = {int}($rtl8710_flasher_buffer)
while ($fresult != 0)
set $fresult = {int}($rtl8710_flasher_buffer)
end
end
###############
# FlasherLoad #
###############
define FlasherLoad
if $rtl8710_flasher_capacity == 0
 printf "initializing RTL8710 flasher\n"
 restore $arg0 binary $rtl8710_flasher_firmware_ptr 0 968
 monitor reset
 set $pc = $rtl8710_flasher_firmware_ptr
 set $sp = 0x1ffffffc
 set {int}($rtl8710_flasher_buffer + 0x08) = 0
 set {int}($rtl8710_flasher_buffer + 0x00) = 1
 #continue
 monitor go
 FlasherWait
 set $id = {int}($rtl8710_flasher_buffer + 0x0C)
 set $rtl8710_flasher_capacity = 1 << (($id >> 16) & 0x0ff)
 if ($id == 0x1420c2) 
  printf "Flash ID = 0x%08x : MX25L8006E (%d kbytes)\n", $id, $rtl8710_flasher_capacity>>10
 else 
  printf "Flash ID = 0x%08x : (%d kbytes)\n", $id, $rtl8710_flasher_capacity>>10
 end
 printf "RTL8710 flasher initialized\n"
else
printf "reinitializing RTL8710 flasher\n"
end
end
##################
# FlasherWrBlock #
##################
define FlasherWrBlock
#printf "FlashWrBlock 0x%08x, 0x%08x\n", $arg0, $arg1 
set {int}($rtl8710_flasher_buffer + 0x04) = 4
set {int}($rtl8710_flasher_buffer + 0x08) = 0
set {int}($rtl8710_flasher_buffer + 0x10) = $arg0
set {int}($rtl8710_flasher_buffer + 0x14) = $arg1
set {int}($rtl8710_flasher_buffer + 0x00) = 1
FlasherWait
set $status = {int}($rtl8710_flasher_buffer + 0x08)
if $status > 0
 error "write error, offset 0x%08x", $arg0
end
end
##################
# FlasherVrBlock #
##################
define FlasherVrBlock
#printf "FlashVrBlock 0x%08x, 0x%08x\n", $arg0, $arg1 
set {int}($rtl8710_flasher_buffer + 0x04) = 5
set {int}($rtl8710_flasher_buffer + 0x08) = 0
set {int}($rtl8710_flasher_buffer + 0x10) = $arg0
set {int}($rtl8710_flasher_buffer + 0x14) = $arg1
set {int}($rtl8710_flasher_buffer + 0x00) = 1
FlasherWait
set $status = {int}($rtl8710_flasher_buffer + 0x08)
if $status > 0
 set $status = {int}($rtl8710_flasher_buffer + 0x0C)
 set $status = {int}($status + $arg0)
 error "verify error, offset 0x%08x", $status
end
end
#################
# FlashSecErase #
#################
define FlashSecErase
#printf "FlashSecErase 0x%08x, 0x%08x\n", $rtl8710_flasher_buffer, $arg0
set {int}($rtl8710_flasher_buffer + 0x04) = 2
set {int}($rtl8710_flasher_buffer + 0x08) = 0
set {int}($rtl8710_flasher_buffer + 0x10) = $arg0
set {int}($rtl8710_flasher_buffer + 0x00) = 1
FlasherWait
end
################
# FlasherWrite #
################
define FlasherWrite
set $sector = 0
set $offset = 0
set $size = $arg2
while $offset < $size
 set $len = $size - $offset
 if $len > $rtl8710_flasher_buffer_size
  set $len = $rtl8710_flasher_buffer_size
 end
 set $flash_offset = $arg1 + $offset
 printf "write offset 0x%08x\n", $flash_offset
 set $parms1 = $rtl8710_flasher_buffer + 0x20 - $offset
 set $parms2 = $offset
 set $parms3 = $offset + $len
 restore $arg0 binary $parms1 $parms2 $parms3
 if $rtl8710_flasher_auto_erase != 0
  set $count_i = $flash_offset
  while $count_i < ($flash_offset + $len)
   set $sector = $count_i/$rtl8710_flasher_sector_size
   if $rtl8710_flasher_auto_erase_sector != $sector
	set $parms1 = $sector * $rtl8710_flasher_sector_size
    printf "erase sector %d at 0x%08x\n", $sector, $parms1 
    FlashSecErase $parms1
    set $rtl8710_flasher_auto_erase_sector = $sector
   end
   set $count_i = $count_i + 1
  end
 end
 FlasherWrBlock $flash_offset $len
 printf "wrote %d bytes at 0x%08x\n", $len, $flash_offset
 if $rtl8710_flasher_auto_verify != 0
  printf "verify offset 0x%08x len %d\n", $flash_offset, $len
  FlasherVrBlock $flash_offset $len
 end
 set $offset = $offset + $rtl8710_flasher_buffer_size
end
end
#########################################
source -v flasher/gdb_flasher.jlink
source -v flasher/file_info.jlink
InitJlink
SystemInit
SetClk83MHz
SPI_Init
FlasherInit
FlasherLoad flasher/rtl8710_flasher.bin
call1
if $ImageSize != 0
set $ImageEnd = $ImageSize + $ImageAddr + 0x4000
if $rtl8710_flasher_capacity >= $ImageEnd
 printf "Write Image size %d to Flash addr 0x%08x:\n", $ImageSize, $ImageAddr
 call2
else
 printf "Error: Image size is too big!\n"
end
else
 printf "Error: Image size is zero!\n"
end
quit