diff --git a/README.md b/README.md
index 6607a55..ec0231a 100644
--- a/README.md
+++ b/README.md
@@ -36,7 +36,7 @@ openocd -f interface/stlink-v2-1.cfg -f rtl8710.ocd -c "init" -c "reset halt" -c
 ```
 openocd -f interface/stlink-v2-1.cfg -f rtl8710.ocd -c "init" -c "reset halt" -c "rtl8710_flash_auto_erase 1" -c "rtl8710_flash_auto_verify 1" -c "rtl8710_flash_write dump.bin 0" -c "shutdown"
 ```
-## About
+# About
 RTL8710 OpenOCD support is created by Rebane (rebane@alkohol.ee)
 
 This document and the attached source code is released under GPLv2.
diff --git a/script/rtl8710.ocd b/script/rtl8710.ocd
index 226f061..c2f78e8 100644
--- a/script/rtl8710.ocd
+++ b/script/rtl8710.ocd
@@ -17,8 +17,6 @@ if { [info exists ENDIAN] } {
 	set _ENDIAN little
 }
 
-# Work-area is a space in RAM used for flash programming
-# By default use 2kB
 if { [info exists WORKAREASIZE] } {
 	set _WORKAREASIZE $WORKAREASIZE
 } else {
@@ -42,8 +40,6 @@ adapter_khz 500
 adapter_nsrst_delay 100
 
 if {![using_hla]} {
-	# if srst is not fitted use SYSRESETREQ to
-	# perform a soft reset
 	cortex_m reset_config sysresetreq
 }