j3d1/rtl00TstMinAmebaV35a
1
0
Fork 0
mirror of https://github.com/pvvx/rtl00TstMinAmebaV35a.git synced 2024-12-30 18:15:18 +00:00
Code Issues Projects Releases Packages Wiki Activity
rtl00TstMinAmebaV35a/component/common/drivers/wlan/realtek/include/autoconf.h
pvvx c399bf5be0 first commit
2016-09-23 07:21:45 +03:00

476 lines
12 KiB
C
Raw Blame History

#ifndef WLANCONFIG_H
#define WLANCONFIG_H
/*
* Include user defined options first. Anything not defined in these files
* will be set to standard values. Override anything you dont like!
*/
#if defined(CONFIG_PLATFORM_8195A) || defined(CONFIG_PLATFORM_8711B) || defined(CONFIG_HARDWARE_8188F)
#include "platform_opts.h"
#endif
#if defined(CONFIG_PLATFORM_8195A) || defined(CONFIG_PLATFORM_8711B)
#define CONFIG_PLATFORM_AMEBA_X
#endif
#if !defined(CONFIG_PLATFORM_AMEBA_X)
#define PLATFORM_FREERTOS 1
#define CONFIG_GSPI_HCI
#else
#define CONFIG_LX_HCI
#endif
#ifndef CONFIG_INIC_EN
#define CONFIG_INIC_EN 0 //For iNIC project
#if CONFIG_INIC_EN
#define CONFIG_LWIP_LAYER 0
#endif
#endif
#define CONFIG_LITTLE_ENDIAN
#define CONFIG_80211N_HT
//#define CONFIG_RECV_REORDERING_CTRL
#define RTW_NOTCH_FILTER 0
#define CONFIG_EMBEDDED_FWIMG
#define CONFIG_PHY_SETTING_WITH_ODM
#if !defined(CONFIG_PLATFORM_AMEBA_X)
#define CONFIG_ODM_REFRESH_RAMASK
#define HAL_MAC_ENABLE 1
#define HAL_BB_ENABLE 1
#define HAL_RF_ENABLE 1
#endif
#if defined(CONFIG_PLATFORM_AMEBA_X)
/* Patch when dynamic mechanism is not ready */
//#define CONFIG_DM_PATCH
#endif
//#define CONFIG_DEBUG
//#define CONFIG_DEBUG_RTL871X
#if defined(CONFIG_PLATFORM_AMEBA_X)
#define CONFIG_MEM_MONITOR MEM_MONITOR_SIMPLE
#define WLAN_INTF_DBG 0
//#define CONFIG_DEBUG_DYNAMIC
//#define DBG_TX 1
//#define DBG_XMIT_BUF 1
//#define DBG_XMIT_BUF_EXT 1
#define DBG_TX_DROP_FRAME
#else
#define CONFIG_MEM_MONITOR MEM_MONITOR_LEAK
//#define CONFIG_TRACE_SKB
//#define WLAN_INTF_DBG
#endif // CONFIG_PLATFORM_AMEBA_X
//#define CONFIG_DONT_CARE_TP
//#define CONFIG_MEMORY_ACCESS_ALIGNED
#define CONFIG_POWER_SAVING
#ifdef CONFIG_POWER_SAVING
#define CONFIG_IPS
#define CONFIG_LPS
//#define CONFIG_LPS_LCLK
#define CONFIG_LPS_32K
#define TDMA_POWER_SAVING
#define CONFIG_WAIT_PS_ACK
#endif
#define BAD_MIC_COUNTERMEASURE 1
#define DEFRAGMENTATION 1
#define WIFI_LOGO_CERTIFICATION 0
#if WIFI_LOGO_CERTIFICATION
#define RX_AGGREGATION 1
#define RX_AMSDU 1
#else
#define RX_AGGREGATION 0
#define RX_AMSDU 0
#endif
#if defined(CONFIG_PLATFORM_AMEBA_X)
#if !defined(CONFIG_PLATFORM_8711B)
#define CONFIG_USE_TCM_HEAP 1 /* USE TCM HEAP */
#endif
#define CONFIG_RECV_TASKLET_THREAD
#define CONFIG_XMIT_TASKLET_THREAD
#else
#define CONFIG_XMIT_THREAD_MODE
#endif // CONFIG_PLATFORM_AMEBA_X
//#define CONFIG_RECV_THREAD_MODE /* Wlan IRQ Polling Mode*/
//#define CONFIG_ISR_THREAD_MODE_POLLING /* Wlan IRQ Polling Mode*/
//1 Chris
#ifndef CONFIG_SDIO_HCI
#define CONFIG_ISR_THREAD_MODE_INTERRUPT /* Wlan IRQ Interrupt Mode*/
#endif
#if defined(CONFIG_ISR_THREAD_MODE_POLLING) && defined(CONFIG_ISR_THREAD_MODE_INTERRUPT)
#error "CONFIG_ISR_THREAD_MODE_POLLING and CONFIG_ISR_THREAD_MODE_INTERRUPT are mutually exclusive. "
#endif
#if defined(CONFIG_PLATFORM_AMEBA_X)
/* CRC DMEM optimized mode consume 1k less SRM memory consumption */
#define CRC_IMPLEMENTATION_MODE CRC_IMPLEMENTATION_DMEM_OPTIMIZED
#endif
/* AES DMEM optimized mode comsume 10k less memory compare to
IMEM optimized mode AES_IMPLEMENTATION_IMEM_OPTIMIZED */
#define AES_IMPLEMENTATION_MODE AES_IMPLEMENTATION_DMEM_OPTIMIZED
#define USE_SKB_AS_XMITBUF 1
#if defined(CONFIG_PLATFORM_AMEBA_X)
#define USE_XMIT_EXTBUFF 1
#else
#define USE_XMIT_EXTBUFF 0
#endif
#define USE_MUTEX_FOR_SPINLOCK 1
// remove function to reduce code
#define NOT_SUPPORT_5G
#define NOT_SUPPORT_RF_MULTIPATH
#define NOT_SUPPORT_VHT
#define NOT_SUPPORT_40M
#define NOT_SUPPORT_80M
#define NOT_SUPPORT_BBSWING
#define NOT_SUPPORT_OLD_CHANNEL_PLAN
#define NOT_SUPPORT_BT
#define CONFIG_WIFI_SPEC 0
#define CONFIG_FAKE_EFUSE 0
#if CONFIG_FAKE_EFUSE
#define FAKE_CHIPID CHIPID_8711AN
#endif
#define CONFIG_AUTO_RECONNECT 1
#define ENABLE_HWPDN_PIN
#define SUPPORT_SCAN_BUF 1
#if !defined(CONFIG_PLATFORM_AMEBA_X)
#define BE_I_CUT 1
#endif
/* For WPA2 */
#define CONFIG_INCLUDE_WPA_PSK
#ifdef CONFIG_INCLUDE_WPA_PSK
#define CONFIG_MULTIPLE_WPA_STA
//#define CONFIG_WPA2_PREAUTH
#define PSK_SUPPORT_TKIP 1
#endif
//#define AP_PSK_SUPPORT_TKIP
/* For promiscuous mode */
#define CONFIG_PROMISC
#ifdef CONFIG_PROMISC
//#define CONFIG_PROMISC_SCAN_CONCURENT
#endif
#define PROMISC_DENY_PAIRWISE 0
/* For Simple Link */
#ifndef CONFIG_INCLUDE_SIMPLE_CONFIG
//#define CONFIG_INCLUDE_SIMPLE_CONFIG 1
#endif
// for probe request with custom vendor specific IE
#define CONFIG_CUSTOM_IE
#if !defined(CONFIG_PLATFORM_AMEBA_X)
/* For multicast */
#define CONFIG_MULTICAST
#endif
/* For STA+AP Concurrent MODE */
#if !defined(CONFIG_PLATFORM_8711B)
#define CONFIG_CONCURRENT_MODE
#endif
#ifdef CONFIG_CONCURRENT_MODE
#if defined(CONFIG_PLATFORM_8195A)
#define CONFIG_RUNTIME_PORT_SWITCH
#endif
#if defined(CONFIG_HARDWARE_8188F)
#define NET_IF_NUM 2
#else
#define NET_IF_NUM ((CONFIG_ETHERNET) + (CONFIG_WLAN) + 1)
#endif
#else
#if defined(CONFIG_HARDWARE_8188F)
#define NET_IF_NUM 1
#else
#define NET_IF_NUM ((CONFIG_ETHERNET) + (CONFIG_WLAN))
#endif
#endif
/****************** For EAP auth configurations *******************/
#define CONFIG_TLS 0
#define CONFIG_PEAP 0
#define CONFIG_TTLS 0
// DO NOT change the below config of EAP
#ifdef PRE_CONFIG_EAP
#define CONFIG_TLS 1
#define CONFIG_PEAP 1
#define CONFIG_TTLS 1
#endif
// enable 1X code in lib_wlan as default (increase 380 bytes)
#define CONFIG_EAP
#if CONFIG_TLS || CONFIG_PEAP || CONFIG_TTLS
#define EAP_REMOVE_UNUSED_CODE 1
#endif
#define EAP_SSL_VERIFY_SERVER
#if CONFIG_TLS
#define EAP_SSL_VERIFY_CLIENT
#endif
#if CONFIG_TTLS
#define EAP_MSCHAPv2
#define EAP_TTLS_MSCHAPv2
//#define EAP_TTLS_EAP
//#define EAP_TTLS_MSCHAP
//#define EAP_TTLS_PAP
//#define EAP_TTLS_CHAP
#endif
/****************** End of EAP configurations *******************/
/* For WPS and P2P */
#define CONFIG_WPS
#if 1
#define CONFIG_WPS_AP
#define CONFIG_P2P_NEW
#if (!defined(SUPPORT_SCAN_BUF)||!defined(CONFIG_WPS_AP)) && defined(CONFIG_P2P_NEW)
#error "If CONFIG_P2P_NEW, need to SUPPORT_SCAN_BUF"
#endif
#endif
#define CONFIG_NEW_SIGNAL_STAT_PROCESS
/* For AP_MODE */
#define CONFIG_AP_MODE
extern unsigned char g_user_ap_sta_num;
#define USER_AP_STA_NUM g_user_ap_sta_num
#if defined(CONFIG_PLATFORM_AMEBA_X)
#define AP_STA_NUM 3 //2014/10/27 modify to 3
#define USE_DEDICATED_BCN_TX 0
#if USE_DEDICATED_BCN_TX
#error "WLAN driver for Ameba should not enable USE_DEDICATED_BCN_TX"
#endif
#else
extern unsigned int g_ap_sta_num;
#define AP_STA_NUM 3//g_ap_sta_num
#endif
#ifdef CONFIG_AP_MODE
#define CONFIG_NATIVEAP_MLME
#if defined(CONFIG_PLATFORM_AMEBA_X)
#define CONFIG_INTERRUPT_BASED_TXBCN
#endif
#ifdef CONFIG_INTERRUPT_BASED_TXBCN
//#define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT
#define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
#endif
// #define CONFIG_GK_REKEY
#if !defined(CONFIG_PLATFORM_AMEBA_X)
#define USE_DEDICATED_BCN_TX 1
#endif
#if CONFIG_INIC_EN
// #define REPORT_STA_EVENT //useless
#endif
#else
#if !defined(CONFIG_PLATFORM_AMEBA_X)
#define USE_DEDICATED_BCN_TX 0
#endif
#endif
#if defined(CONFIG_AP_MODE) && defined(CONFIG_GK_REKEY) && !defined(CONFIG_MULTIPLE_WPA_STA)
#error "If CONFIG_GK_REKEY when CONFIG_AP_MODE, need to CONFIG_MULTIPLE_WPA_STA"
#endif
#if !defined(CONFIG_PLATFORM_AMEBA_X)
#if !defined(CONFIG_AP_MODE) && defined(CONFIG_CONCURRENT_MODE)
#error "If CONFIG_CONCURRENT_MODEE, need to CONFIG_AP_MODE"
#endif
#endif
/* For efuse or flash config */
#if defined(CONFIG_PLATFORM_AMEBA_X)
#define CONFIG_RW_PHYSICAL_EFUSE 0 // Mask efuse user blocks
#define CONFIG_HIDE_PROTECT_EFUSE 1
#define CONFIG_ADAPTOR_INFO_CACHING_FLASH 1
#define CHECK_FLASH_VALID_MASK 1
#define CHECK_EFUSE_VALID_MASK 1
/* For K-free */
// #if !defined(CONFIG_PLATFORM_8711B)
#define CONFIG_RF_GAIN_OFFSET
// #endif
#endif // CONFIG_PLATFORM_AMEBA_X
/* For MP_MODE */
//#define CONFIG_MP_INCLUDED
#ifdef CONFIG_MP_INCLUDED
#define MP_DRIVER 1
#define CONFIG_MP_IWPRIV_SUPPORT
// #define HAL_EFUSE_MEMORY
#if defined(CONFIG_PLATFORM_AMEBA_X)
#define MP_REG_TEST
#endif
#else
#define MP_DRIVER 0
#if defined(CONFIG_PLATFORM_8195A)
//Control wifi mcu function
#define CONFIG_LITTLE_WIFI_MCU_FUNCTION_THREAD
#define CONFIG_ODM_REFRESH_RAMASK
#define CONFIG_ANTENNA_DIVERSITY
#endif
#endif // #ifdef CONFIG_MP_INCLUDED
#if defined(CONFIG_PLATFORM_AMEBA_X)
#if defined(CONFIG_PLATFORM_8195A)
#define CONFIG_RTL8195A
#endif
#if defined(CONFIG_PLATFORM_8711B)
#ifndef CONFIG_RTL8711B
#define CONFIG_RTL8711B
#endif
#endif
#elif defined(CONFIG_HARDWARE_8188F)
#define CONFIG_RTL8188F
#else
#define CONFIG_RTL8188E
#endif
#define RTL8192C_SUPPORT 0
#define RTL8192CE_SUPPORT 0
#define RTL8192CU_SUPPORT 0
#define RTL8192D_SUPPORT 0
#define RTL8192DE_SUPPORT 0
#define RTL8192DU_SUPPORT 0
#define RTL8723A_SUPPORT 0
#define RTL8723AU_SUPPORT 0
#define RTL8723AS_SUPPORT 0
#define RTL8192E_SUPPORT 0
#define RTL8812A_SUPPORT 0
#define RTL8821A_SUPPORT 0
#define RTL8723B_SUPPORT 0
#define RTL8195A_SUPPORT 0
#define RTL8188E_SUPPORT 0
#define RTL8188F_SUPPORT 0
#define RTL8711B_SUPPORT 0
#if defined(CONFIG_PLATFORM_8195A)
#undef RTL8195A_SUPPORT
#define RTL8195A_SUPPORT 1
#elif defined(CONFIG_PLATFORM_8711B)
#undef RTL8711B_SUPPORT
#define RTL8711B_SUPPORT 1
#elif defined(CONFIG_HARDWARE_8188F)
#undef RTL8188F_SUPPORT
#define RTL8188F_SUPPORT 1
#else
#undef RTL8188E_SUPPORT
#define RTL8188E_SUPPORT 1
#endif
#define TEST_CHIP_SUPPORT 0
#define RTL8188E_FOR_TEST_CHIP 0
#define RTL8188E_FPGA_TRUE_PHY_VERIFICATION 0
// for Debug message
#define DBG 0
#if defined(CONFIG_PLATFORM_AMEBA_X)
#if(DBG == 0)
#define ROM_E_RTW_MSG 1
/* For DM debug*/
// BB
#define DBG_RX_INFO 1
#define DBG_TX_RATE 1 // DebugComponents: bit9
#define DBG_DM_RA 1 // DebugComponents: bit9
#define DBG_DM_DIG 1 // DebugComponents: bit0
#define DBG_DM_ANT_DIV 1 // DebugComponents: bit6
#define DBG_DM_ADAPTIVITY 1 // DebugComponents: bit17
// RF
#define DBG_PWR_TRACKING 1 // DebugComponents: bit24
#define DBG_RF_IQK 1 // DebugComponents: bit26
// Common
#define DBG_PWR_INDEX 1 // DebugComponents: bit30
#endif
#endif
/* For DM support */
#if defined(CONFIG_RTL8188F)
#define RATE_ADAPTIVE_SUPPORT 0
#else
#define RATE_ADAPTIVE_SUPPORT 1
#endif
// adaptivity
#define RTW_ADAPTIVITY_EN_DISABLE 0
#define RTW_ADAPTIVITY_EN_ENABLE 1
#define CONFIG_RTW_ADAPTIVITY_EN RTW_ADAPTIVITY_EN_DISABLE
#define RTW_ADAPTIVITY_MODE_NORMAL 0
#define RTW_ADAPTIVITY_MODE_CARRIER_SENSE 1
#define CONFIG_RTW_ADAPTIVITY_MODE RTW_ADAPTIVITY_MODE_CARRIER_SENSE
#define CONFIG_RTW_ADAPTIVITY_DML 0
#if defined(CONFIG_PLATFORM_AMEBA_X)
#define CONFIG_POWER_TRAINING_WIL 0 // in RA
#else
#define POWER_BY_RATE_SUPPORT 0
#endif
#if defined(CONFIG_PLATFORM_AMEBA_X)
#define RTL8195A_FOR_TEST_CHIP 0
//#define CONFIG_WIFI_TEST 1
//#define CONFIG_MAC_LOOPBACK_DRIVER 1
//#define CONFIG_WLAN_HAL_TEST 1
//#define SKB_PRE_ALLOCATE_TX 1
#define SKB_PRE_ALLOCATE_RX 0
#define TX_CHECK_DSEC_ALWAYS 1
#define CONFIG_DBG_DISABLE_RDU_INTERRUPT
//#define CONFIG_WLAN_HAL_RX_TASK
#if (SKB_PRE_ALLOCATE_RX == 1)
#define EXCHANGE_LXBUS_RX_SKB 0
#endif
#if defined(CONFIG_PLATFORM_8711B)
//Enable mac loopback for test mode (Ameba)
#define CONFIG_TWO_MAC_DRIVER // for test mode
#endif
#ifdef ENABLE_MAC_LB_FOR_TEST_MODE
#define CONFIG_SUDO_PHY_SETTING
#define INT_HANDLE_IN_ISR 1
#define CONFIG_LWIP_LAYER 0
#define CONFIG_WLAN_HAL_TEST
#define CONFIG_WLAN_HAL_RX_TASK
#define CONFIG_MAC_LOOPBACK_DRIVER_RTL8711B 1
#define HAL_MAC_ENABLE 1
#define CONFIG_TWO_MAC_TEST_MODE
#define DISABLE_BB_RF 1
#else
//#define CONFIG_TWO_MAC_DRIVER //for mornal driver; two mac
#ifdef CONFIG_TWO_MAC_DRIVER
#define CONFIG_SUDO_PHY_SETTING
#define HAL_MAC_ENABLE 1
#define DISABLE_BB_RF 1
#else
#define HAL_MAC_ENABLE 1
#define HAL_BB_ENABLE 1
#define HAL_RF_ENABLE 1
#define DISABLE_BB_RF 0
#endif
//#define INT_HANDLE_IN_ISR 1
#endif
#endif // CONFIG_PLATFORM_AMEBA_X
#ifndef CONFIG_LWIP_LAYER
#define CONFIG_LWIP_LAYER 1
#endif
#define CONFIG_MAC_ADDRESS 0
//fast reconnection
//#define CONFIG_FAST_RECONNECTION 1
#if defined(CONFIG_INIC_EN)&&(CONFIG_INIC_EN==1)
#define CONFIG_RECV_REORDERING_CTRL //enable reordering for iNIC high throughput
#undef RX_AGGREGATION
#define RX_AGGREGATION 1
#undef NOT_SUPPORT_40M
#undef CONFIG_CONCURRENT_MODE
#endif
#endif //WLANCONFIG_H
Reference in a new issue View git blame Copy permalink