j3d1/rtl00TstMinAmebaV35a
1
0
Fork 0
mirror of https://github.com/pvvx/rtl00TstMinAmebaV35a.git synced 2024-11-25 02:34:15 +00:00
Code Issues Projects Releases Packages Wiki Activity
rtl00TstMinAmebaV35a/component/soc/realtek/8195a/fwlib/rtl8195a/rtl8195a_sdio_host.h
pvvx c399bf5be0 first commit
2016-09-23 07:21:45 +03:00

809 lines
19 KiB
C
Raw Blame History

/*
* Routines to access hardware
*
* Copyright (c) 2013 Realtek Semiconductor Corp.
*
* This module is a confidential and proprietary property of RealTek and
* possession or use of this module requires written permission of RealTek.
*/
#ifndef _RTL8195A_SDIO_HOST_H_
#define _RTL8195A_SDIO_HOST_H_
#include "hal_api.h"
#include "osdep_api.h"
#define HAL_SDIO_HOST_READ32(addr) HAL_READ32(SDIO_HOST_REG_BASE, addr)
#define HAL_SDIO_HOST_WRITE32(addr, value) HAL_WRITE32(SDIO_HOST_REG_BASE, addr, value)
#define HAL_SDIO_HOST_READ16(addr) HAL_READ16(SDIO_HOST_REG_BASE, addr)
#define HAL_SDIO_HOST_WRITE16(addr, value) HAL_WRITE16(SDIO_HOST_REG_BASE, addr, value)
#define HAL_SDIO_HOST_READ8(addr) HAL_READ8(SDIO_HOST_REG_BASE, addr)
#define HAL_SDIO_HOST_WRITE8(addr, value) HAL_WRITE8(SDIO_HOST_REG_BASE, addr, value)
/* =============== Register Offset Definition =============== */
#define REG_SDIO_HOST_SDMA_SYS_ADDR 0x00 // 4byte
#define REG_SDIO_HOST_BLK_SIZE 0x04 // 2byte
#define REG_SDIO_HOST_BLK_CNT 0x06 // 2byte
#define REG_SDIO_HOST_ARG 0x08 // 4byte
#define REG_SDIO_HOST_XFER_MODE 0x0C // 2byte
#define REG_SDIO_HOST_CMD 0x0E // 2byte
#define REG_SDIO_HOST_RSP0 0x10 // 4byte
#define REG_SDIO_HOST_RSP2 0x14 // 4byte
#define REG_SDIO_HOST_RSP4 0x18 // 4byte
#define REG_SDIO_HOST_RSP6 0x1C // 4byte
#define REG_SDIO_HOST_BUF_DATA_PORT 0x20 // 4byte
#define REG_SDIO_HOST_PRESENT_STATE 0x24 // 4byte
#define REG_SDIO_HOST_HOST_CTRL 0x28 // 1byte
#define REG_SDIO_HOST_PWR_CTRL 0x29 // 1byte
#define REG_SDIO_HOST_BLK_GAP_CTRL 0x2A // 1byte
#define REG_SDIO_HOST_WAKEUP_CTRL 0x2B // 1byte
#define REG_SDIO_HOST_CLK_CTRL 0x2C // 2byte
#define REG_SDIO_HOST_TIMEOUT_CTRL 0x2E // 1byte
#define REG_SDIO_HOST_SW_RESET 0x2F // 1byte
#define REG_SDIO_HOST_NORMAL_INT_STATUS 0x30 // 2byte
#define REG_SDIO_HOST_ERROR_INT_STATUS 0x32 // 2byte
#define REG_SDIO_HOST_NORMAL_INT_STATUS_EN 0x34 // 2byte
#define REG_SDIO_HOST_ERROR_INT_STATUS_EN 0x36 // 2byte
#define REG_SDIO_HOST_NORMAL_INT_SIG_EN 0x38 // 2byte
#define REG_SDIO_HOST_ERROR_INT_SIG_EN 0x3A // 2byte
#define REG_SDIO_HOST_CAPABILITIES 0x40 // 8byte
#define REG_SDIO_HOST_ADMA_SYS_ADDR 0x58 // 8byte
/* =============================================== */
/* Block Count Register (0x06) */
#define BLK_CNT_REG_MAX 0xFFFF // 65535 blocks
/* Transfer Mode Register (0x0C) */
#define XFER_MODE_DMA_EN BIT0
#define XFER_MODE_BLK_CNT_EN BIT1
#define XFER_MODE_AUTO_CMD12_EN BIT2
#define XFER_MODE_DATA_XFER_DIR BIT4
#define XFER_MODE_MULT_SINGLE_BLK BIT5
/* Present State Register (0x24) */
#define PRES_STATE_CMD_INHIBIT_CMD BIT0
#define PRES_STATE_CMD_INHIBIT_DAT BIT1
#define PRES_STATE_DAT_LINE_ACTIVE BIT2
#define PRES_STATE_CARD_INSERTED BIT16
#define PRES_STATE_DAT0_SIGNAL_LEVEL BIT20
/* Power Control Register (0x29) */
#define PWR_CTRL_SD_BUS_PWR BIT0
/* Clock Control Register (0x2C) */
#define CLK_CTRL_INTERAL_CLK_EN BIT0
#define CLK_CTRL_INTERAL_CLK_STABLE BIT1
#define CLK_CTRL_SD_CLK_EN BIT2
/* Software Reset Register (0x2F) */
#define SW_RESET_FOR_ALL BIT0
#define SW_RESET_FOR_CMD BIT1
#define SW_RESET_FOR_DAT BIT2
/* Normal Interrupt Status (0x30) */
#define NOR_INT_STAT_CMD_COMP BIT0
#define NOR_INT_STAT_XFER_COMP BIT1
#define NOR_INT_STAT_BLK_GAP_EVENT BIT2
#define NOR_INT_STAT_DMA_INT BIT3
#define NOR_INT_STAT_BUF_WR_RDY BIT4
#define NOR_INT_STAT_BUF_RD_RDY BIT5
#define NOR_INT_STAT_CARD_INSERT BIT6
#define NOR_INT_STAT_CARD_REMOVAL BIT7
#define NOR_INT_STAT_CARD_INT BIT8
#define NOR_INT_STAT_ERR_INT BIT15
/* Error Interrupt Status (0x32) */
#define ERR_INT_STAT_CMD_TIMEOUT BIT0
#define ERR_INT_STAT_CMD_CRC BIT1
#define ERR_INT_STAT_CMD_END_BIT BIT2
#define ERR_INT_STAT_CMD_IDX BIT3
#define ERR_INT_STAT_DATA_TIMEOUT BIT4
#define ERR_INT_STAT_DATA_CRC BIT5
#define ERR_INT_STAT_DATA_END_BIT BIT6
#define ERR_INT_STAT_CUR_LIMIT BIT7
#define ERR_INT_STAT_AUTO_CMD12 BIT8
#define ERR_INT_STAT_ADMA BIT9
/* Normal Interrupt Status Enable (0x34) */
#define NOR_INT_STAT_EN_CMD_COMP BIT0
#define NOR_INT_STAT_EN_XFER_COMP BIT1
#define NOR_INT_STAT_EN_BLK_GAP_EVENT BIT2
#define NOR_INT_STAT_EN_DMA_INT BIT3
#define NOR_INT_STAT_EN_BUF_WR_RDY BIT4
#define NOR_INT_STAT_EN_BUF_RD_RDY BIT5
#define NOR_INT_STAT_EN_CARD_INSERT BIT6
#define NOR_INT_STAT_EN_CARD_REMOVAL BIT7
#define NOR_INT_STAT_EN_CARD_INT BIT8
/* Error Interrupt Status Enable (0x36) */
#define ERR_INT_STAT_EN_CMD_TIMEOUT BIT0
#define ERR_INT_STAT_EN_CMD_CRC BIT1
#define ERR_INT_STAT_EN_CMD_END_BIT BIT2
#define ERR_INT_STAT_EN_CMD_IDX BIT3
#define ERR_INT_STAT_EN_DATA_TIMEOUT BIT4
#define ERR_INT_STAT_EN_DATA_CRC BIT5
#define ERR_INT_STAT_EN_DATA_END_BIT BIT6
#define ERR_INT_STAT_EN_CUR_LIMIT BIT7
#define ERR_INT_STAT_EN_AUTO_CMD BIT8
#define ERR_INT_STAT_EN_ADMA BIT9
/* Normal Interrupt Signal Enable (0x38) */
#define NOR_INT_SIG_EN_CMD_COMP BIT0
#define NOR_INT_SIG_EN_XFER_COMP BIT1
#define NOR_INT_SIG_EN_BLK_GAP_EVENT BIT2
#define NOR_INT_SIG_EN_DMA_INT BIT3
#define NOR_INT_SIG_EN_BUF_WR_RDY BIT4
#define NOR_INT_SIG_EN_BUF_RD_RDY BIT5
#define NOR_INT_SIG_EN_CARD_INSERT BIT6
#define NOR_INT_SIG_EN_CARD_REMOVAL BIT7
#define NOR_INT_SIG_EN_CARD_INT BIT8
/* Error Interrupt Signal Enable (0x3A) */
#define ERR_INT_SIG_EN_CMD_TIMEOUT BIT0
#define ERR_INT_SIG_EN_CMD_CRC BIT1
#define ERR_INT_SIG_EN_CMD_END_BIT BIT2
#define ERR_INT_SIG_EN_CMD_IDX BIT3
#define ERR_INT_SIG_EN_DATA_TIMEOUT BIT4
#define ERR_INT_SIG_EN_DATA_CRC BIT5
#define ERR_INT_SIG_EN_DATA_END_BIT BIT6
#define ERR_INT_SIG_EN_CUR_LIMIT BIT7
#define ERR_INT_SIG_EN_AUTO_CMD BIT8
#define ERR_INT_SIG_EN_ADMA BIT9
/* Capabilities Register (0x40) */
#define CAPA_TIMEOUT_CLK_UNIT BIT7
#define CAPA_ADMA2_SUPPORT BIT19
#define CAPA_HIGH_SPEED_SUPPORT BIT21
#define CAPA_VOLT_SUPPORT_33V BIT24
#define CAPA_VOLT_SUPPORT_30V BIT25
#define CAPA_VOLT_SUPPORT_18V BIT26
#define DATA_BLK_LEN 512
#define SCR_REG_LEN 8 // 64 bits
#define SWITCH_FN_STATUS_LEN 64 // 512 bits
#define SD_STATUS_LEN 64 // 512 bits
#define CSD_REG_LEN 16 // 128 bits
/* Switch Function (CMD6) Group */
#define SWITCH_FN_GRP1_DEFAULT BIT0
#define SWITCH_FN_GRP1_HIGH_SPEED BIT1
#define SWITCH_FN_GRP2_DEFAULT BIT0
#define SWITCH_FN_GRP2_FOR_EC BIT1
#define SWITCH_FN_GRP2_VENDOR_SPECIFIC BIT14
/* Operating Condition (ACMD41) */
#define ACMD41_POLL_INTERVAL 10000 // 10 ms
#define ACMD41_INIT_TIMEOUT 1000000 // 1 sec
/* Card Status (R1) */
#define R1_APP_CMD BIT5
#define R1_WP_VIOLATION BIT26
/* Error Interrupt Recovery */
#define HAL_SDH_RECOVERED 0x10
/* 0x0C */
typedef enum
{
WRITE_OP = 0,
READ_OP = 1
}DATA_OPERATION;
/* 0x0E */
typedef enum
{
CMD_GO_IDLE_STATE = 0,
CMD_ALL_SEND_CID = 2,
CMD_SEND_RELATIVE_ADDR = 3,
CMD_SET_DSR = 4,
CMD_SWITCH_FUNC = 6,
CMD_SELECT_DESELECT_CARD = 7,
CMD_SEND_IF_COND = 8,
CMD_SEND_CSD = 9,
CMD_SEND_CID = 10,
CMD_VOLTAGE_SWITCH = 11,
CMD_STOP_TRANSMISSION = 12,
CMD_SEND_STATUS = 13,
CMD_GO_INACTIVE_STATE = 15,
CMD_SET_BLOCKLEN = 16,
CMD_READ_SINGLE_BLOCK = 17,
CMD_READ_MULTIPLE_BLOCK = 18,
CMD_SET_BLOCK_COUNT = 23,
CMD_WRITE_BLOCK = 24,
CMD_WRITE_MULTIPLE_BLOCK = 25,
CMD_PROGRAM_CSD = 27,
CMD_ERASE_WR_BLK_START = 32,
CMD_ERASE_WR_BLK_END = 33,
CMD_ERASE = 38,
CMD_SD_SEND_OP_COND = 41,
CMD_LOCK_UNLOCK = 42,
CMD_SEND_SCR = 51,
CMD_APP_CMD = 55
}CMD_IDX;
typedef enum
{
NORMAL, // 00b
SUSPEND, // 01b
RESUME, // 10b
ABORT // 11b
}CMD_TYPE;
typedef enum
{
NO_DATA, // 00b
WITH_DATA // 01b
}DATA_PRESENT_SEL;
typedef enum
{
NO_RSP, // 00b
RSP_LEN_136, // 01b
RSP_LEN_48, // 10b
RSP_LEN_48_CHK_BUSY // 11b
}RSP_TYPE;
/* 0x28 */
typedef enum
{
SDMA, // 00b
RESERVED, // 01b
ADMA2_32BIT, // 10b
ADMA2_64BIT // 11b
}HOST_DMA_SELECT;
typedef enum
{
MODE_1_BIT = 0,
MODE_4_BIT = 1
}HOST_DATA_WIDTH;
/* 0x29 */
typedef enum
{
VOLT_33V = 7,// 111b
VOLT_30V = 6,// 110b
VOLT_18V = 5 // 101b
}HOST_SD_BUS_VOLT;
/* 0x2C */
typedef enum
{
BASE_CLK = 0x00,
BASE_CLK_DIVIDED_BY_2 = 0x01,
BASE_CLK_DIVIDED_BY_4 = 0x02,
BASE_CLK_DIVIDED_BY_8 = 0x04,
BASE_CLK_DIVIDED_BY_16 = 0x08,
BASE_CLK_DIVIDED_BY_32 = 0x10,
BASE_CLK_DIVIDED_BY_64 = 0x20,
BASE_CLK_DIVIDED_BY_128 = 0x40,
BASE_CLK_DIVIDED_BY_256 = 0x80
}SD_CLK_DIVISOR;
typedef enum
{
SD_CLK_162KHZ,
SD_CLK_325KHZ,
SD_CLK_650KHZ,
SD_CLK_1_3MHZ,
SD_CLK_2_6MHZ,
SD_CLK_5_2MHZ,
SD_CLK_10_4MHZ,
SD_CLK_20_8MHZ,
SD_CLK_41_6MHZ
}SD_CLK_FREQUENCY;
/* Card Status Register */
typedef enum
{
IDLE, // 0
READY, // 1
IDENTIFICATION, // 2
STAND_BY, // 3
TRANSFER, // 4
SENDING_DATA, // 5
RECEIVE_DATA, // 6
PROGRAMMING, // 7
DISCONNECT, // 8
UNKNOWN = 0xFF
}CURRENT_STATE;
/* OCR Register */
typedef enum
{
VDD_27_28 = BIT15,
VDD_28_29 = BIT16,
VDD_29_30 = BIT17,
VDD_30_31 = BIT18,
VDD_31_32 = BIT19,
VDD_32_33 = BIT20,
VDD_33_34 = BIT21,
VDD_34_35 = BIT22,
VDD_35_36 = BIT23,
CARD_CAPA_STATUS = BIT30,
CARD_PWR_UP_STATUS = BIT31
}OCR_VOLTAGE_PROFILE;
/* SCR Register */
typedef enum
{
SD_VER_10 = 0,
SD_VER_110 = 1,
SD_VER_200 = 2
}PHYSICAL_LAYER_SPEC_VER;
/* CSD Register */
typedef enum
{
CLEAR_WRITE_PROTECT = 0,
SET_WRITE_PROTECT = 1
}TEMPORARY_WRITE_PROTECT_STATUS;
/* Switch Function (CMD6) Status Data Structure Version */
typedef enum
{
BUSY_STATUS_UNDEFINED = 0, // bits [511:376] are defined
BUSY_STATUS_DEFINED = 1 // bits [511:272] are defined
}SWITCH_FN_STATUS_DATA_STRUCTURE_VER;
/* Switch Function (CMD6) Busy Status */
typedef enum
{
READY_STATUS = 0,
BUSY_STATUS = 1
}SWITCH_FN_BUSY_STATUS;
/* Switch Function (CMD6) Mode */
typedef enum
{
CHECK_FN = 0x0,
SWITCH_FN = 0x1
}SWITCH_FN_MODE;
/* Switch Function (CMD6) Group 1 */
typedef enum
{
FN1_DEFAULT = 0x0,
FN1_HIGH_SPEED = 0x1,
FN1_KEEP_CURRENT = 0xF
}SWITCH_FN_GROUP_1;
/* Switch Function (CMD6) Group 2 */
typedef enum
{
FN2_DEFAULT = 0x0,
FN2_FOR_EC = 0x1,
FN2_VENDOR_SPECIFIC = 0xE,
FN2_KEEP_CURRENT = 0xF
}SWITCH_FN_GROUP_2;
typedef enum
{
DESEL_CARD = 0,
SEL_CARD = 1
}CARD_SELECTION;
typedef enum
{
SDSC_ONLY = 0,
SDHC_SUPPORT = 1
}HOST_CAPACITY_SUPPORT;
typedef enum
{
BUS_1_BIT = 0,
BUS_4_BIT = 2
}DATA_BUS_WIDTH;
typedef struct _ADMA2_ATTRIB_
{
u16 Valid:1;
u16 End:1;
u16 Int:1;
u16 Rsvd1:1;
u16 Act1:1;
u16 Act2:1;
u16 Rsvd2:10;
}ADMA2_ATTRIB, *PADMA2_ATTRIB;
typedef struct _ADMA2_DESC_FMT_
{
ADMA2_ATTRIB Attrib1;
u16 Len1;
u32 Addr1;
/* Link to next descriptor (if needed) */
ADMA2_ATTRIB Attrib2;
u16 Len2;
u32 Addr2;
}ADMA2_DESC_FMT, *PADMA2_DESC_FMT;
/* 0x0E */
typedef struct _SDIO_HOST_CMD_FMT_
{
u16 RespType:2;
u16 Rsvd0:1;
u16 CmdCrcChkEn:1;
u16 CmdIdxChkEn:1;
u16 DataPresent:1;
u16 CmdType:2;
u16 CmdIdx:6;
u16 Rsvd1:2;
}SDIO_HOST_CMD_FMT, *PSDIO_HOST_CMD_FMT;
typedef struct _SDIO_HOST_CMD_
{
SDIO_HOST_CMD_FMT CmdFmt;
u32 Arg;
}SDIO_HOST_CMD, *PSDIO_HOST_CMD;
HAL_Status
HalSdioHostInitHostRtl8195a(
IN VOID *Data
);
HAL_Status
HalSdioHostInitCardRtl8195a(
IN VOID *Data
);
HAL_Status
HalSdioHostDeInitRtl8195a(
IN VOID *Data
);
HAL_Status
HalSdioHostEnableRtl8195a(
IN VOID *Data
);
HAL_Status
HalSdioHostDisableRtl8195a(
IN VOID *Data
);
HAL_Status
HalSdioHostIrqInitRtl8195a(
IN VOID *Data
);
HAL_Status
HalSdioHostReadBlocksDmaRtl8195a(
IN VOID *Data,
IN u64 ReadAddr,
IN u32 BlockCnt
);
HAL_Status
HalSdioHostWriteBlocksDmaRtl8195a(
IN VOID *Data,
IN u64 WriteAddr,
IN u32 BlockCnt
);
HAL_Status
HalSdioHostStopTransferRtl8195a(
IN VOID *Data
);
HAL_Status
HalSdioHostGetCardStatusRtl8195a(
IN VOID *Data
);
HAL_Status
HalSdioHostGetSdStatusRtl8195a(
IN VOID *Data
);
HAL_Status
HalSdioHostChangeSdClockRtl8195a(
IN VOID *Data,
IN u8 Frequency
);
HAL_Status
HalSdioHostEraseRtl8195a(
IN VOID *Data,
IN u64 StartAddr,
IN u64 EndAddr
);
HAL_Status
HalSdioHostGetWriteProtectRtl8195a(
IN VOID *Data
);
HAL_Status
HalSdioHostSetWriteProtectRtl8195a(
IN VOID *Data,
IN u8 Setting
);
#ifdef CONFIG_SDIO_HOST_VERIFY
#define HAL_MMC_HOST_READ32(addr) HAL_READ32(SDIO_HOST_REG_BASE, addr)
#define HAL_MMC_HOST_WRITE32(addr, value) HAL_WRITE32(SDIO_HOST_REG_BASE, addr, value)
#define HAL_MMC_HOST_READ16(addr) HAL_READ16(SDIO_HOST_REG_BASE, addr)
#define HAL_MMC_HOST_WRITE16(addr, value) HAL_WRITE16(SDIO_HOST_REG_BASE, addr, value)
#define HAL_MMC_HOST_READ8(addr) HAL_READ8(SDIO_HOST_REG_BASE, addr)
#define HAL_MMC_HOST_WRITE8(addr, value) HAL_WRITE8(SDIO_HOST_REG_BASE, addr, value)
/* RTL8195A Register */
// REG_SOC_HCI_COM_FUNC_EN (0x214)
#define SD_DEVICE_IP_ON_BLK BIT0
#define SD_DEVICE_IP_OFF_BLK BIT1
#define SD_HOST_IP_BLK BIT2
// REG_PESOC_HCI_CLK_CTRL0 (0x240)
#define SD_HOST_CLKEN_IN_CPU_RUN_MODE BIT2
// REG_HCI_PINMUX_CTRL (0x2A0)
#define SD_DEVICE_MODE_PINMUX_EN BIT0
#define SD_HOST_MODE_PINMUX_EN BIT1
// 0x40059000
#define SD_HOST_CARD_DETECT_CIRCUIT BIT10
/* SD Host Register */
#define REG_SDMA_SYS_ADDR_ARG 0x00 // 4byte
#define REG_BLOCK_SIZE 0x04 // 2byte
#define REG_BLOCK_COUNT 0x06 // 2byte
#define REG_ARGUMENT1 0x08 // 4byte
#define REG_TRANSFER_MODE 0x0C // 2byte
#define REG_COMMAND 0x0E // 2byte
#define REG_RESPONSE0 0x10 // 4byte
#define REG_RESPONSE2 0x14 // 4byte
#define REG_RESPONSE4 0x18 // 4byte
#define REG_RESPONSE6 0x1C // 4byte
#define REG_BUFFER_DATA_PORT 0x20 // 4byte
#define REG_PRESENT_STATE 0x24 // 4byte
#define REG_HOST_CONTROL1 0x28 // 1byte
#define REG_POWER_CONTROL 0x29 // 1byte
#define REG_BLOCK_GAP_CONTROL 0x2A // 1byte
#define REG_WAKEUP_CONTROL 0x2B // 1byte
#define REG_CLOCK_CONTROL 0x2C // 2byte
#define REG_TIMEOUT_CONTROL 0x2E // 1byte
#define REG_SW_RESET 0x2F // 1byte
#define REG_NORMAL_INT_STATUS 0x30 // 2byte
#define REG_ERROR_INT_STATUS 0x32 // 2byte
#define REG_NORMAL_INT_STATUS_ENABLE 0x34 // 2byte
#define REG_ERROR_INT_STATUS_ENABLE 0x36 // 2byte
#define REG_NORMAL_INT_SIGNAL_ENABLE 0x38 // 2byte
#define REG_ERROR_INT_SIGNAL_ENABLE 0x3A // 2byte
#define REG_CAPABILITIES 0x40 // 8byte
#define REG_ADMA_ADDRESS 0x58 // 8byte
// Transfer Mode (0x0C)
#define BIT_DMA_EN BIT0
#define BIT_BLK_CNT_EN BIT1
#define BIT_AUTO_CMD12_EN BIT2
#define BIT_AUTO_CMD23_EN BIT3
#define BIT_READ_TRANS BIT4
#define BIT_MULTI_BLK BIT5
// Present State (0x24)
#define BIT_CMD_INHIBIT_CMD BIT0
#define BIT_CMD_INHIBIT_DAT BIT1
#define BIT_CARD_INSERTED BIT16
#define BIT_WRITE_PROTECT_SWITCH_PIN BIT19
// Power Control (0x29)
#define BIT_POWER_33 0xE
#define BIT_POWER_30 0xC
#define BIT_POWER_18 0xA
// Clock Control (0x2C)
#define BIT_INTERNAL_CLK_EN BIT0
#define BIT_INTERNAL_CLK_STABLE BIT1
#define BIT_SD_CLK_EN BIT2
// Software Reset (0x2F)
#define BIT_SW_RESET_ALL BIT0
#define BIT_SW_RESET_CMD_LINE BIT1
#define BIT_SW_RESET_DAT_LINE BIT2
// Norma Interrupt Status (0x30)
#define BIT_COMMAND_COMPLETE BIT0
#define BIT_TRANSFER_COMPLETE BIT1
#define BIT_BLOCK_GAP_EVENT BIT2
#define BIT_DMA_INT BIT3
#define BIT_BUFFER_WRITE_RDY BIT4
#define BIT_BUFFER_READ_RDY BIT5
#define BIT_CARD_INSERTION BIT6
#define BIT_CARD_REMOVAL BIT7
#define BIT_CARD_INT BIT8
#define BIT_ERROR_INT BIT15
// Error Interrupt Status (0x32)
#define BIT_DATA_TIME_OUT_ERROR BIT4
#define BIT_DATA_CRC_ERROR BIT5
#define BIT_ADMA_ERROR BIT9
// Capabilities (0x40)
#define BIT_VDD_33 BIT24
#define BIT_VDD_30 BIT25
#define BIT_VDD_18 BIT26
#define ENABLE 1
#define DISABLE 0
#define ADMA_DESC_NUM 50
#define BUFFER_UNIT_SIZE 512
typedef enum _MMC_HOST_TEST_FUNC_ {
MMC_HOST_TEST_HW_INIT, // 0
MMC_HOST_TEST_CARD_INIT, // 1
MMC_HOST_TEST_SEND_CMD, // 2
MMC_HOST_TEST_DEBUG, // 3
MMC_HOST_TEST_SW_RESET, // 4
MMC_HOST_TEST_READ_SINGLE, // 5
MMC_HOST_TEST_WRITE_SINGLE, // 6
MMC_HOST_TEST_READ_MULTI, // 7
MMC_HOST_TEST_WRITE_MULTI, // 8
MMC_HOST_TEST_SINGLE_LONGRUN, // 9
MMC_HOST_TEST_MULTI_LONGRUN, // 10
MMC_HOST_TEST_CARD_DETECTION, // 11
MMC_HOST_TEST_WRITE_PROTECT, // 12
MMC_HOST_TEST_REGISTER_RW, // 13
SD_HOST_HAL_API_VERIFY = 20,
SD_HOST_ERASE_TEST = 21,
SD_HOST_WP_TEST = 22,
SD_HOST_MB_TEST = 23,
SD_HOST_ADMA_MAX_TEST = 24
}MMC_HOST_TEST_FUNC;
typedef enum _RESPONSE_TYPE_ {
No_Response, // 00b
Response_136, // 01b
Response_48, // 10b
Response_48_Busy // 11b
}RESPONSE_TYPE;
typedef enum _COMMAND_TYPE_ {
Normal, // 00b
Suspend, // 01b
Resume, // 10b
Abort // 11b
}COMMAND_TYPE;
typedef enum _DATA_PRESENT_ {
No_Data_Present, // 00b
Data_Present, // 01b
}DATA_PRESENT;
typedef enum _SUPPLY_VOLTAGE_ {
MMC_VDD_27_28 = BIT15,
MMC_VDD_28_29 = BIT16,
MMC_VDD_29_30 = BIT17,
MMC_VDD_30_31 = BIT18,
MMC_VDD_31_32 = BIT19,
MMC_VDD_32_33 = BIT20,
MMC_VDD_33_34 = BIT21,
MMC_VDD_34_35 = BIT22,
MMC_VDD_35_36 = BIT23,
}SUPPLY_VOLTAGE;
typedef enum _COMMAND_INDEX_ {
GO_IDLE_STATE = 0,
ALL_SEND_CID = 2,
SEND_RELATIVE_ADDR = 3,
SET_BUS_WIDTH = 6,
SELECT_CARD = 7,
SEND_IF_COND = 8,
SEND_CSD = 9,
STOP_TRANSMISSION = 12,
SEND_STATUS = 13,
READ_SINGLE_BLOCK = 17,
READ_MULTIPLE_BLOCK = 18,
WRITE_BLOCK = 24,
WRITE_MULTIPLE_BLOCK = 25,
SD_SEND_OP_COND = 41,
APP_CMD = 55,
}COMMAND_INDEX;
typedef enum _TRANSFER_CONFIG_ {
Read_Data = 0,
Write_Data = 1,
Single_Block = 0,
Multiple_Block = 1,
}TRANSFER_CONFIG;
typedef enum _ERROR_STATUS_ {
General_Error, // 0
CRC_Error, // 1
TIME_OUT_ERROR, // 2
CRC_Error_NeedCMD12, // 3
Transfer_OK // 4
}ERROR_STATUS;
typedef enum _CARD_CURRENT_STATE_ {
IDLE_STATE,
READY_STATE,
IDENT_STATE,
STBY_STATE,
TRAN_STATE,
DATA_STATE,
RCV_STATE,
PRG_STATE,
DIS_STATE,
UNKNOWN_STATE
}CARD_CURRENT_STATE;
typedef struct _COMMAND_FORMAT_
{
u16 Resp_Type:2;
u16 Rsvd0:1;
u16 CMD_CRC_Chk:1;
u16 CMD_Idx_Chk:1;
u16 Data_Present:1;
u16 CMD_Type:2;
u16 CMD_Idx:6;
u16 Rsvd1:2;
}COMMAND_FORMAT, *PCOMMAND_FPRMAT;
typedef struct _MMC_COMMAND
{
COMMAND_FORMAT Cmd_Format;
u32 Arg;
}MMC_COMMAND;
typedef struct _MMC_HOST_
{
u32 OCR_Avail;
u32 Resp[4];
u32 CID[4];
u32 RCA;
}MMC_HOST, *PMMC_HOST;
typedef struct _ADMA_ATTR_
{
u16 Valid:1;
u16 End:1;
u16 Int:1;
u16 Rsvd1:1;
u16 Act1:1;
u16 Act2:1;
u16 Rsvd2:10;
}ADMA_ATTR, *PADMA_ATTR;
// 24 bytes
typedef struct _ADMA_DESC_TABLE_
{
// 1st buffer desc
ADMA_ATTR Attribute1;
u16 Length1;
u32 Address1;
// 2nd buffer desc
ADMA_ATTR Attribute2;
u16 Length2;
u32 Address2;
// 3rd buffer desc
ADMA_ATTR Attribute3;
u16 Length3;
u32 Address3;
}ADMA_DESC_TABLE, *PADMA_DESC_TABLE;
// 1024 bytes
typedef struct _ADMA_BUFFER_
{
u8 Data1[512]; /* 1st buffer */
u8 Data2[512]; /* 2nd buffer */
}ADMA_BUFFER, *PADMA_BUFFER;
VOID
SdHostTestApp(
IN u8 *argv[]
);
#endif // end of "#ifdef CONFIG_SDIO_HOST_VERIFY"
#endif /* #ifndef _RTL8195A_SDIO_HOST_H_ */
Reference in a new issue View git blame Copy permalink