/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_OBJECTS_H #define MBED_OBJECTS_H #include "cmsis.h" #include "PortNames.h" #include "PeripheralNames.h" #include "PinNames.h" #ifdef __cplusplus extern "C" { #endif #ifdef CONFIG_GPIO_EN struct gpio_irq_s { PinName pin; uint32_t event; HAL_GPIO_PIN hal_pin; uint8_t hal_port_num; uint8_t hal_pin_num; }; typedef struct gpio_irq_s gpio_irq_t; struct gpio_s { PinName pin; PinMode mode; PinDirection direction; HAL_GPIO_PIN hal_pin; uint8_t hal_port_num; uint8_t hal_pin_num; }; typedef struct gpio_s gpio_t; struct port_s { PortName port; uint32_t mask; PinDirection direction; uint8_t *pin_def; }; #endif // end of "#ifdef CONFIG_GPIO_EN" #ifdef CONFIG_UART_EN struct serial_s { HAL_RUART_OP hal_uart_op; HAL_RUART_ADAPTER hal_uart_adp; #ifdef CONFIG_GDMA_EN UART_DMA_CONFIG uart_gdma_cfg; HAL_GDMA_ADAPTER uart_gdma_adp_tx; HAL_GDMA_ADAPTER uart_gdma_adp_rx; UART_DMA_MULTIBLK gdma_multiblk_list_tx; UART_DMA_MULTIBLK gdma_multiblk_list_rx; #endif uint32_t tx_len; uint32_t rx_len; }; #endif // end of "#ifdef CONFIG_UART_EN" struct log_uart_s { HAL_LOG_UART_ADAPTER log_hal_uart; }; #ifdef CONFIG_SPI_COM_EN #endif #ifdef CONFIG_PWM_EN struct pwmout_s { uint8_t pwm_idx; uint8_t pin_sel; uint32_t period; uint32_t pulse; HAL_PWM_ADAPTER pwm_hal_adp; }; #endif #ifdef CONFIG_I2C_EN struct i2c_s { SAL_I2C_MNGT_ADPT SalI2CMngtAdpt; SAL_I2C_HND_PRIV SalI2CHndPriv; HAL_I2C_INIT_DAT HalI2CInitData; HAL_I2C_OP HalI2COp; IRQ_HANDLE I2CIrqHandleDat; HAL_GDMA_ADAPTER HalI2CTxGdmaAdpt; HAL_GDMA_ADAPTER HalI2CRxGdmaAdpt; HAL_GDMA_OP HalI2CGdmaOp; IRQ_HANDLE I2CTxGdmaIrqHandleDat; IRQ_HANDLE I2CRxGdmaIrqHandleDat; SAL_I2C_USER_CB SalI2CUserCB; SAL_I2C_USERCB_ADPT SalI2CUserCBAdpt[SAL_USER_CB_NUM]; SAL_I2C_DMA_USER_DEF SalI2CDmaUserDef; }; #endif struct flash_s { SPIC_INIT_PARA SpicInitPara; u32 Length; }; #ifdef CONFIG_ADC_EN struct analogin_s { SAL_ADC_MNGT_ADPT SalADCMngtAdpt; SAL_ADC_HND_PRIV SalADCHndPriv; HAL_ADC_INIT_DAT HalADCInitData; HAL_ADC_OP HalADCOp; IRQ_HANDLE ADCIrqHandleDat; HAL_GDMA_ADAPTER HalADCGdmaAdpt; HAL_GDMA_OP HalADCGdmaOp; IRQ_HANDLE ADCGdmaIrqHandleDat; SAL_ADC_USER_CB SalADCUserCB; SAL_ADC_USERCB_ADPT SalADCUserCBAdpt[SAL_ADC_USER_CB_NUM]; }; #endif #if 0 struct i2c_s { I2C_Type *i2c; }; struct spi_s { SPI_Type *spi; }; #endif #ifdef CONFIG_NFC_EN struct nfctag_s { NFC_ADAPTER NFCAdapter; void *nfc_rd_cb; // read callback function void *rd_cb_arg; void *nfc_wr_cb; // write callback function void *wr_cb_arg; void *nfc_ev_cb; // event callback function void *ev_cb_arg; void *nfc_cache_rd_cb; // cache read callback function void *cache_read_cb_arg; unsigned int event_mask; int pwr_status; }; #endif #ifdef CONFIG_TIMER_EN struct gtimer_s { TIMER_ADAPTER hal_gtimer_adp; void *handler; u32 hid; u8 timer_id; u8 is_periodcal; }; #endif #ifdef CONFIG_I2S_EN struct i2s_s { HAL_I2S_ADAPTER I2SAdapter; HAL_I2S_INIT_DAT InitDat; u8 sampling_rate; u8 channel_num; u8 word_length; u8 direction; }; #endif #ifdef CONFIG_DAC_EN /** \file objects.h * \brief A Documented file. * * A documented file. */ /** \struct dac_s objects.h "rtl8195a/objects.h" * \brief This is a dac_s structure. * * For analogout APIs, a pointer to dac_s is used as an input paras. * A DAC initial data structure is the major element of dac_s. */ struct dac_s { HAL_DAC_INIT_DAT DACpara; }; #endif #ifdef __cplusplus } #endif #endif