/* * Routines to access hardware * * Copyright (c) 2013 Realtek Semiconductor Corp. * * This module is a confidential and proprietary property of RealTek and * possession or use of this module requires written permission of RealTek. */ #ifndef _HAL_IRQN_H_ #define _HAL_IRQN_H_ #define PERIPHERAL_IRQ_BASE_NUM 64 typedef enum _IRQn_Type_ { #if 0 /****** Cortex-M3 Processor Exceptions Numbers ********/ NON_MASKABLE_INT_IRQ = -14, HARD_FAULT_IRQ = -13, MEM_MANAGE_FAULT_IRQ = -12, BUS_FAULT_IRQ = -11, USAGE_FAULT_IRQ = -10, SVCALL_IRQ = -5, DEBUG_MONITOR_IRQ = -4, PENDSVC_IRQ = -2, SYSTICK_IRQ = -1, #else /****** Cortex-M3 Processor Exceptions Numbers ********/ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ #endif /****** RTL8195A Specific Interrupt Numbers ************/ SYSTEM_ON_IRQ = 0, WDG_IRQ = 1, TIMER0_IRQ = 2, TIMER1_IRQ = 3, I2C3_IRQ = 4, TIMER2_7_IRQ = 5, SPI0_IRQ = 6, GPIO_IRQ = 7, UART0_IRQ = 8, SPI_FLASH_IRQ = 9, USB_OTG_IRQ = 10, SDIO_HOST_IRQ = 11, SDIO_DEVICE_IRQ = 12, I2S0_PCM0_IRQ = 13, I2S1_PCM1_IRQ = 14, WL_DMA_IRQ = 15, WL_PROTOCOL_IRQ = 16, CRYPTO_IRQ = 17, GMAC_IRQ = 18, PERIPHERAL_IRQ = 19, GDMA0_CHANNEL0_IRQ = 20, GDMA0_CHANNEL1_IRQ = 21, GDMA0_CHANNEL2_IRQ = 22, GDMA0_CHANNEL3_IRQ = 23, GDMA0_CHANNEL4_IRQ = 24, GDMA0_CHANNEL5_IRQ = 25, GDMA1_CHANNEL0_IRQ = 26, GDMA1_CHANNEL1_IRQ = 27, GDMA1_CHANNEL2_IRQ = 28, GDMA1_CHANNEL3_IRQ = 29, GDMA1_CHANNEL4_IRQ = 30, GDMA1_CHANNEL5_IRQ = 31, /****** RTL8195A Peripheral Interrupt Numbers ************/ I2C0_IRQ = 64,// 0 + 64, I2C1_IRQ = 65,// 1 + 64, I2C2_IRQ = 66,// 2 + 64, SPI1_IRQ = 72,// 8 + 64, SPI2_IRQ = 73,// 9 + 64, UART1_IRQ = 80,// 16 + 64, UART2_IRQ = 81,// 17 + 64, UART_LOG_IRQ = 88,// 24 + 64, ADC_IRQ = 89,// 25 + 64, DAC0_IRQ = 91,// 27 + 64, DAC1_IRQ = 92,// 28 + 64, //RXI300_IRQ = 93// 29 + 64 LP_EXTENSION_IRQ = 93,// 29+64 PTA_TRX_IRQ = 95,// 31+64 RXI300_IRQ = 96,// 0+32 + 64 NFC_IRQ = 97// 1+32+64 } IRQn_Type, *PIRQn_Type; typedef VOID (*HAL_VECTOR_FUN) (VOID); typedef enum _VECTOR_TABLE_TYPE_{ DEDECATED_VECTRO_TABLE, PERIPHERAL_VECTOR_TABLE }VECTOR_TABLE_TYPE, *PVECTOR_TABLE_TYPE; typedef void (*IRQ_FUN)(VOID *Data); typedef struct _IRQ_HANDLE_ { IRQ_FUN IrqFun; IRQn_Type IrqNum; u32 Data; u32 Priority; }IRQ_HANDLE, *PIRQ_HANDLE; #endif //_HAL_IRQN_H_