diff --git a/flasher/gdb_rdflash.jlink b/flasher/gdb_rdflash.jlink
new file mode 100644
index 0000000..9016cf7
--- /dev/null
+++ b/flasher/gdb_rdflash.jlink
@@ -0,0 +1,102 @@
+#Message display setting
+#disable all messages
+
+set verbose off
+set complaints 0
+set confirm off
+set exec-done-display off
+show exec-done-display
+set trace-commands off
+#set debug aix-thread off
+#set debug dwarf2-die 0
+set debug displaced off 
+set debug expression 0
+set debug frame 0
+set debug infrun 0
+set debug observer 0
+set debug overload 0
+#set debugvarobj 0
+set pagination off
+set print address off
+set print symbol-filename off
+set print symbol off
+set print pretty off
+set print object off
+#set debug notification off
+set debug parser off
+set debug remote 0
+#
+# J-LINK GDB SERVER initialization
+#
+target remote localhost:2331
+set remotetimeout 10000
+monitor device Cortex-M3
+monitor endian little
+monitor reset
+# Set max speed
+monitor speed 4000
+set mem inaccessible-by-default off
+# Setup GDB FOR FASTER DOWNLOADS
+set remote memory-write-packet-size 4096
+set remote memory-write-packet-size fixed
+#------------------------------------------------------------------
+# Boot Flash
+monitor long 0x40000210 = 0x211157
+# CPU CLK 83 MHz?
+monitor long 0x40000014 = 0x21
+#------------------------------------------------------------------
+# System init 
+monitor long 0x40000304 = 0x1FC00002
+monitor long 0x40000250 = 0x400
+monitor long 0x40000340 = 0x0
+monitor long 0x40000230 = 0xdcc4
+monitor long 0x40000210 = 0x11117
+monitor long 0x40000210 = 0x11157
+monitor long 0x400002c0 = 0x110011
+monitor long 0x40000320 = 0xffffffff
+#------------------------------------------------------------------
+# SPI Init
+#enable spi flash peripheral clock
+set $Temp = {int}(0x40000230)
+set $Temp = ($Temp | 0x300)
+set {int}(0x40000230) = $Temp
+#enable spi flash peripheral
+set $Temp = {int}(0x40000210)
+set $Temp = ($Temp | 0x10)
+set {int}(0x40000210) = $Temp
+#select spi flash pinout (0 - internal), enable spi flash pins 
+set $Temp = {int}(0x400002C0)
+set $Temp = (($Temp & 0xFFFFFFF8) | 1)
+set {int}(0x400002C0) = $Temp
+#disable SPI FLASH operation
+monitor long 0x40006008 = 0
+#disable all interrupts
+monitor long 0x4000602C = 0
+#use first "slave select" pin
+monitor long 0x40006010 = 1
+#baud rate, default value
+monitor long 0x40006014 = 2
+#tx fifo threshold
+monitor long 0x40006018 = 0
+#rx fifo threshold
+monitor long 0x4000601C = 0
+#disable DMA
+monitor long 0x4000604C = 0
+#------------------------------------------------------------------
+# Read FullFlash
+set $SPI_FLASH_BASE = 0x98000000
+set $dumpstartaddr = $SPI_FLASH_BASE
+set $dumpendaddr = $SPI_FLASH_BASE + 0x100000
+printf "start addr of dumping"
+p /x $dumpstartaddr
+printf "end addr of dumping"
+p /x $dumpendaddr
+dump binary memory ./build/bin/fullflash.bin $dumpstartaddr $dumpendaddr
+printf "FullFlash saved in ./build/bin/fullflash.bin - OK.\n"
+#------------------------------------------------------------------
+# Reset
+monitor reset
+# Boot Flash
+monitor long 0x40000210 = 0x211157
+monitor go
+quit