open-ameba/sdk/component/soc/realtek/8195a/fwlib/hal_platform.h
Drasko DRASKOVIC eeb7f808ae Change SDK dir name. Use OpenOCD only.
Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com>
2017-05-14 18:47:13 +02:00

102 lines
3.1 KiB
C

/*
* Routines to access hardware
*
* Copyright (c) 2013 Realtek Semiconductor Corp.
*
* This module is a confidential and proprietary property of RealTek and
* possession or use of this module requires written permission of RealTek.
*/
#ifndef _HAL_PLATFORM_
#define _HAL_PLATFORM_
#define ROMVERSION 0x03
#define ROMINFORMATION (ROMVERSION)
#define SYSTEM_CLK PLATFORM_CLOCK
#define PERIPHERAL_IRQ_STATUS 0x04
#define PERIPHERAL_IRQ_MODE 0x08
#define PERIPHERAL_IRQ_EN 0x0C
#define LP_PERI_EXT_IRQ_STATUS 0x24
#define LP_PERI_EXT_IRQ_MODE 0x28
#define LP_PERI_EXT_IRQ_EN 0x2C
#define PERIPHERAL_IRQ_ALL_LEVEL 0
#define TIMER_CLK 32*1000
#define SDR_SDRAM_BASE 0x30000000
#define SYSTEM_CTRL_BASE 0x40000000
#define PERI_ON_BASE 0x40000000
#define SPI_FLASH_BASE 0x98000000
//3 Peripheral IP Base Address
#define GPIO_REG_BASE 0x40001000
#define TIMER_REG_BASE 0x40002000
#define VENDOR_REG_BASE 0x40002800
#define NFC_INTERFACE_BASE 0x40002400
#define LOG_UART_REG_BASE 0x40003000
#define I2C2_REG_BASE 0x40003400
#define I2C3_REG_BASE 0x40003800
#define SDR_CTRL_BASE 0x40005000
#define SPI_FLASH_CTRL_BASE 0x40006000
#define ADC_REG_BASE 0x40010000
#define DAC_REG_BASE 0x40011000
#define UART0_REG_BASE 0x40040000
#define UART1_REG_BASE 0x40040400
#define UART2_REG_BASE 0x40040800
#define SPI0_REG_BASE 0x40042000
#define SPI1_REG_BASE 0x40042400
#define SPI2_REG_BASE 0x40042800
#define I2C0_REG_BASE 0x40044000
#define I2C1_REG_BASE 0x40044400
#define SDIO_DEVICE_REG_BASE 0x40050000
#define MII_REG_BASE 0x40050000
#define SDIO_HOST_REG_BASE 0x40058000
#define GDMA0_REG_BASE 0x40060000
#define GDMA1_REG_BASE 0x40061000
#define I2S0_REG_BASE 0x40062000
#define I2S1_REG_BASE 0x40063000
#define PCM0_REG_BASE 0x40064000
#define PCM1_REG_BASE 0x40065000
#define CRYPTO_REG_BASE 0x40070000
#define WIFI_REG_BASE 0x40080000
#define USB_OTG_REG_BASE 0x400C0000
#define GDMA1_REG_OFF 0x1000
#define I2S1_REG_OFF 0x1000
#define PCM1_REG_OFF 0x1000
#define SSI_REG_OFF 0x400
#define RUART_REG_OFF 0x400
#define CPU_CLK_TYPE_NO 6
enum _BOOT_TYPE_ {
BOOT_FROM_FLASH = 0,
BOOT_FROM_SDIO = 1,
BOOT_FROM_USB = 2,
BOOT_FROM_RSVD = 3,
};
enum _EFUSE_CPU_CLK_ {
#if 1
CLK_200M = 0,
CLK_100M = 1,
CLK_50M = 2,
CLK_25M = 3,
CLK_12_5M = 4,
CLK_4M = 5,
#else
CLK_25M = 0,
CLK_200M = 1,
CLK_100M = 2,
CLK_50M = 3,
CLK_12_5M = 4,
CLK_4M = 5,
#endif
};
#endif //_HAL_PLATFORM_