mirror of
https://github.com/drasko/open-ameba.git
synced 2024-11-22 14:04:19 +00:00
25 lines
No EOL
1 KiB
Text
25 lines
No EOL
1 KiB
Text
Example Description
|
|
|
|
This example describes how to use SPI stream read/write by mbed api.
|
|
|
|
|
|
The SPI Interface provides a "Serial Peripheral Interface" Master.
|
|
|
|
This interface can be used for communication with SPI slave devices,
|
|
such as FLASH memory, LCD screens and other modules or integrated circuits.
|
|
|
|
|
|
In this example, we use config SPI_IS_AS_MASTER to decide if device is master or slave.
|
|
If SPI_IS_AS_MASTER is 1, then device is master.
|
|
If SPI_IS_AS_MASTER is 0, then device is slave.
|
|
|
|
We connect wires as below:
|
|
master's MOSI (PC_2) connect to slave's MOSI (PC_2)
|
|
master's MISO (PC_3) connect to slave's MISO (PC_3)
|
|
master's SCLK (PC_1) connect to slave's SCLK (PC_1)
|
|
master's CS (PC_0) connect to slave's CS (PC_0)
|
|
|
|
This example shows master sends data to slave.
|
|
We bootup slave first, and then bootup master.
|
|
Then log will presents that master sending data to slave.
|
|
To ensure the order is correct, we use a GPIO pin to notify the master that the slave device is ready to write or read data. |