mirror of
https://github.com/drasko/open-ameba.git
synced 2024-12-28 00:55:19 +00:00
594 lines
24 KiB
C
594 lines
24 KiB
C
/*
|
|
* Routines to access hardware
|
|
*
|
|
* Copyright (c) 2013 Realtek Semiconductor Corp.
|
|
*
|
|
* This module is a confidential and proprietary property of RealTek and
|
|
* possession or use of this module requires written permission of RealTek.
|
|
*/
|
|
|
|
#ifndef _HAL_I2C_H_ //#ifndef _HAL_I2C_H_
|
|
#define _HAL_I2C_H_
|
|
|
|
#include "rtl8195a_i2c.h"
|
|
#include "hal_gdma.h"
|
|
|
|
//================= I2C CONFIGURATION START ==================
|
|
// I2C SAL User Configuration Flags
|
|
|
|
// I2C SAL operation types
|
|
#define I2C_POLL_OP_TYPE 1
|
|
#define I2C_INTR_OP_TYPE 1
|
|
#define I2C_DMA_OP_TYPE 1
|
|
|
|
// I2C supports user register address
|
|
#define I2C_USER_REG_ADDR 1 //I2C User specific register address by using
|
|
//the first I2C data as the register
|
|
//address
|
|
|
|
// I2C SAL used module. Please set the I2C module flag to 1 to enable the related
|
|
// I2C module functions.
|
|
#define I2C0_USED 1
|
|
#define I2C1_USED 1
|
|
#define I2C2_USED 1
|
|
#define I2C3_USED 1
|
|
//================= I2C CONFIGURATION END ===================
|
|
|
|
|
|
//================= I2C HAL START ==========================
|
|
// I2C debug output
|
|
#define I2C_PREFIX "RTL8195A[i2c]: "
|
|
#define I2C_PREFIX_LVL " [i2c_DBG]: "
|
|
|
|
typedef enum _I2C_DBG_LVL_ {
|
|
HAL_I2C_LVL = 0x01,
|
|
SAL_I2C_LVL = 0x02,
|
|
VERI_I2C_LVL = 0x03,
|
|
}I2C_DBG_LVL,*PI2C_DBG_LVL;
|
|
|
|
#if CONFIG_DEBUG_LOG > 0
|
|
#ifdef CONFIG_DEBUG_LOG_I2C_HAL
|
|
#define DBG_I2C_LOG_PERD 100
|
|
|
|
#define I2CDBGLVL 0xFF
|
|
#define DBG_8195A_I2C(...) do{ \
|
|
_DbgDump(I2C_PREFIX __VA_ARGS__);\
|
|
}while(0)
|
|
|
|
#define DBG_8195A_I2C_LVL(LVL,...) do{\
|
|
if (LVL&I2CDBGLVL){\
|
|
_DbgDump(I2C_PREFIX_LVL __VA_ARGS__);\
|
|
}\
|
|
}while(0)
|
|
#else
|
|
#define DBG_I2C_LOG_PERD 100
|
|
#define DBG_8195A_I2C(...)
|
|
#define DBG_8195A_I2C_LVL(...)
|
|
#endif
|
|
#else
|
|
#define DBG_I2C_LOG_PERD 100
|
|
#define DBG_8195A_I2C(...)
|
|
#define DBG_8195A_I2C_LVL(...)
|
|
#endif
|
|
|
|
#define I2C_MTR_RTY_CNT 1024
|
|
//======================================================
|
|
// I2C HAL related enumeration
|
|
// I2C Module Selection
|
|
typedef enum _I2C_MODULE_SEL_ {
|
|
I2C0_SEL = 0x0,
|
|
I2C1_SEL = 0x1,
|
|
I2C2_SEL = 0x2,
|
|
I2C3_SEL = 0x3,
|
|
}I2C_MODULE_SEL,*PI2C_MODULE_SEL;
|
|
|
|
// I2C HAL initial data structure
|
|
typedef struct _HAL_I2C_INIT_DAT_ {
|
|
u8 I2CIdx; //I2C index used
|
|
u8 I2CEn; //I2C module enable
|
|
u8 I2CMaster; //Master or Slave mode
|
|
u8 I2CAddrMod; //I2C addressing mode(7-bit, 10-bit)
|
|
|
|
u8 I2CSpdMod; //I2C speed mode(Standard, Fast, High)
|
|
u8 I2CSetup; //I2C SDA setup time
|
|
u8 I2CRXTL; //I2C RX FIFO Threshold
|
|
u8 I2CTXTL; //I2C TX FIFO Threshold
|
|
|
|
u8 I2CBusLd; //I2C bus load (pf) for high speed mode
|
|
u8 I2CReSTR; //I2C restart support
|
|
u8 I2CGC; //I2C general support
|
|
u8 I2CStartB; //I2C start byte support
|
|
|
|
u8 I2CSlvNoAck; //I2C slave no ack support
|
|
u8 I2CDMACtrl; //I2C DMA feature support
|
|
u8 I2CCmd; //I2C Command
|
|
u8 I2CDataLen; //I2C Data Length
|
|
|
|
u8 I2CSlvAckGC; //I2C slave acks to General Call
|
|
u8 I2CStop; //I2C issues STOP bit or not
|
|
u16 RSVD0; //Bit0: used to control HalI2CMassSendRtl8195a_Patch sending
|
|
// RESTART or not by upper layer SW.
|
|
|
|
u8 *I2CRWData; //I2C Read/Write data pointer
|
|
|
|
u16 I2CIntrMSK; //I2C Interrupt Mask
|
|
u16 I2CIntrClr; //I2C Interrupt register to clear
|
|
|
|
u16 I2CAckAddr; //I2C target address in I2C Master mode,
|
|
//ack address in I2C Slave mode
|
|
u16 I2CSdaHd; //I2C SDA hold time
|
|
|
|
u32 I2CClk; //I2C bus clock (in kHz)
|
|
|
|
u8 I2CTxDMARqLv; //I2C TX DMA Empty Level
|
|
u8 I2CRxDMARqLv; //I2C RX DMA Full Level
|
|
u16 RSVD1; //Reserved
|
|
}HAL_I2C_INIT_DAT,*PHAL_I2C_INIT_DAT;
|
|
|
|
// I2C HAL Operations
|
|
typedef struct _HAL_I2C_OP_ {
|
|
HAL_Status (*HalI2CInit) (VOID *Data); //HAL I2C initialization
|
|
HAL_Status (*HalI2CDeInit) (VOID *Data); //HAL I2C de-initialization
|
|
HAL_Status (*HalI2CSend) (VOID *Data); //HAL I2C send
|
|
u8 (*HalI2CReceive) (VOID *Data); //HAL I2C receive
|
|
HAL_Status (*HalI2CEnable) (VOID *Data); //HAL I2C enable module
|
|
HAL_Status (*HalI2CIntrCtrl) (VOID *Data); //HAL I2C interrupt control
|
|
u32 (*HalI2CReadReg) (VOID *Data, u8 I2CReg);//HAL I2C read register
|
|
HAL_Status (*HalI2CWriteReg) (VOID *Data, u8 I2CReg, u32 RegVal);//HAL I2C write register
|
|
HAL_Status (*HalI2CSetCLK) (VOID *Data); //HAL I2C set bus clock
|
|
HAL_Status (*HalI2CMassSend) (VOID *Data); //HAL I2C mass send
|
|
HAL_Status (*HalI2CClrIntr) (VOID *Data); //HAL I2C clear interrupts
|
|
HAL_Status (*HalI2CClrAllIntr) (VOID *Data); //HAL I2C clear all interrupts
|
|
HAL_Status (*HalI2CDMACtrl) (VOID *Data); //HAL I2C DMA control
|
|
}HAL_I2C_OP, *PHAL_I2C_OP;
|
|
//================= I2C HAL END ===========================
|
|
|
|
|
|
//================= I2C SAL START ==========================
|
|
//I2C SAL Macros
|
|
|
|
//======================================================
|
|
// I2C SAL related enumerations
|
|
// I2C Extend Features
|
|
typedef enum _I2C_EXD_SUPPORT_{
|
|
I2C_EXD_RESTART = 0x1, //BIT_0, RESTART bit
|
|
I2C_EXD_GENCALL = 0x2, //BIT_1, Master generates General Call. All "send" operations generate General Call addresss
|
|
I2C_EXD_STARTB = 0x4, //BIT_2, Using START BYTE, instead of START Bit
|
|
I2C_EXD_SLVNOACK = 0x8, //BIT_3, Slave no ack to master
|
|
I2C_EXD_BUS400PF = 0x10, //BIT_4, I2C bus loading is 400pf
|
|
I2C_EXD_SLVACKGC = 0x20, //BIT_5, Slave acks to a General Call
|
|
I2C_EXD_USER_REG = 0x40, //BIT_6, Using User Register Address
|
|
I2C_EXD_USER_TWOB = 0x80, //BIT_7, User Register Address is 2-byte
|
|
I2C_EXD_MTR_ADDR_RTY= 0x100, //BIT_8, Master retries to send start condition and Slave address when the slave doesn't ack
|
|
// the address.
|
|
I2C_EXD_MTR_ADDR_UPD= 0x200, //BIT_9, Master dynamically updates slave address
|
|
I2C_EXD_MTR_HOLD_BUS= 0x400, //BIT_10, Master doesn't generate STOP when the FIFO is empty. This would make Master hold
|
|
// the bus.
|
|
}I2C_EXD_SUPPORT,*PI2C_EXD_SUPPORT;
|
|
|
|
// I2C operation type
|
|
typedef enum _I2C_OP_TYPE_ {
|
|
I2C_POLL_TYPE = 0x0,
|
|
I2C_DMA_TYPE = 0x1,
|
|
I2C_INTR_TYPE = 0x2,
|
|
}I2C_OP_TYPE, *PI2C_OP_TYPE;
|
|
|
|
// I2C pinmux selection
|
|
typedef enum _I2C_PINMUX_ {
|
|
I2C_PIN_S0 = 0x0,
|
|
I2C_PIN_S1 = 0x1,
|
|
I2C_PIN_S2 = 0x2,
|
|
I2C_PIN_S3 = 0x3, //Only valid for I2C0 and I2C3
|
|
}I2C_PINMUX, *PI2C_PINMUX;
|
|
|
|
// I2C module status
|
|
typedef enum _I2C_MODULE_STATUS_ {
|
|
I2C_DISABLE = 0x0,
|
|
I2C_ENABLE = 0x1,
|
|
}I2C_MODULE_STATUS, *PI2C_MODULE_STATUS;
|
|
|
|
// I2C device status
|
|
typedef enum _I2C_Device_STATUS_ {
|
|
I2C_STS_UNINITIAL = 0x00,
|
|
I2C_STS_INITIALIZED = 0x01,
|
|
I2C_STS_IDLE = 0x02,
|
|
|
|
I2C_STS_TX_READY = 0x03,
|
|
I2C_STS_TX_ING = 0x04,
|
|
|
|
I2C_STS_RX_READY = 0x05,
|
|
I2C_STS_RX_ING = 0x06,
|
|
|
|
I2C_STS_ERROR = 0x10,
|
|
I2C_STS_TIMEOUT = 0x11,
|
|
}I2C_Device_STATUS, *PI2C_Device_STATUS;
|
|
|
|
// I2C feature status
|
|
typedef enum _I2C_FEATURE_STATUS_{
|
|
I2C_FEATURE_DISABLED = 0,
|
|
I2C_FEATURE_ENABLED = 1,
|
|
}I2C_FEATURE_STATUS,*PI2C_FEATURE_STATUS;
|
|
|
|
// I2C device mode
|
|
typedef enum _I2C_DEV_MODE_ {
|
|
I2C_SLAVE_MODE = 0x0,
|
|
I2C_MASTER_MODE = 0x1,
|
|
}I2C_DEV_MODE, *PI2C_DEV_MODE;
|
|
|
|
// I2C Bus Transmit/Receive
|
|
typedef enum _I2C_DIRECTION_ {
|
|
I2C_ONLY_TX = 0x1,
|
|
I2C_ONLY_RX = 0x2,
|
|
I2C_TXRX = 0x3,
|
|
}I2C_DIRECTION, *PI2C_DIRECTION;
|
|
|
|
//I2C DMA module number
|
|
typedef enum _I2C_DMA_MODULE_SEL_ {
|
|
I2C_DMA_MODULE_0 = 0x0,
|
|
I2C_DMA_MODULE_1 = 0x1
|
|
}I2C_DMA_MODULE_SEL, *PI2C_DMA_MODULE_SEL;
|
|
|
|
// I2C0 DMA peripheral number
|
|
typedef enum _I2C0_DMA_PERI_NUM_ {
|
|
I2C0_DMA_TX_NUM = 0x8,
|
|
I2C0_DMA_RX_NUM = 0x9,
|
|
}I2C0_DMA_PERI_NUM,*PI2C0_DMA_PERI_NUM;
|
|
|
|
// I2C1 DMA peripheral number
|
|
typedef enum _I2C1_DMA_PERI_NUM_ {
|
|
I2C1_DMA_TX_NUM = 0xA,
|
|
I2C1_DMA_RX_NUM = 0xB,
|
|
}I2C1_DMA_PERI_NUM,*PI2C1_DMA_PERI_NUM;
|
|
|
|
// I2C0 DMA module used
|
|
typedef enum _I2C0_DMA_MODULE_ {
|
|
I2C0_DMA0 = 0x0,
|
|
I2C0_DMA1 = 0x1,
|
|
}I2C0_DMA_MODULE,*PI2C0_DMA_MODULE;
|
|
|
|
// I2C0 DMA module used
|
|
typedef enum _I2C1_DMA_MODULE_ {
|
|
I2C1_DMA0 = 0x0,
|
|
I2C1_DMA1 = 0x1,
|
|
}I2C1_DMA_MODULE,*PI2C1_DMA_MODULE;
|
|
|
|
// I2C command type
|
|
typedef enum _I2C_COMMAND_TYPE_ {
|
|
I2C_WRITE_CMD = 0x0,
|
|
I2C_READ_CMD = 0x1,
|
|
}I2C_COMMAND_TYPE,*PI2C_COMMAND_TYPE;
|
|
|
|
// I2C STOP BIT
|
|
typedef enum _I2C_STOP_TYPE_ {
|
|
I2C_STOP_DIS = 0x0,
|
|
I2C_STOP_EN = 0x1,
|
|
}I2C_STOP_TYPE, *PI2C_STOP_TYPE;
|
|
|
|
// I2C error type
|
|
typedef enum _I2C_ERR_TYPE_ {
|
|
I2C_ERR_RX_UNDER = 0x01, //I2C RX FIFO Underflow
|
|
I2C_ERR_RX_OVER = 0x02, //I2C RX FIFO Overflow
|
|
I2C_ERR_TX_OVER = 0x04, //I2C TX FIFO Overflow
|
|
I2C_ERR_TX_ABRT = 0x08, //I2C TX terminated
|
|
I2C_ERR_SLV_TX_NACK = 0x10, //I2C slave transmission terminated by master NACK,
|
|
//but there are data in slave TX FIFO
|
|
I2C_ERR_MST_A_NACK = 0x12,
|
|
I2C_ERR_MST_D_NACK = 0x13,
|
|
I2C_ERR_USER_REG_TO = 0x20,
|
|
|
|
I2C_ERR_RX_CMD_TO = 0x21,
|
|
I2C_ERR_RX_FF_TO = 0x22,
|
|
I2C_ERR_TX_CMD_TO = 0x23,
|
|
I2C_ERR_TX_FF_TO = 0x24,
|
|
|
|
I2C_ERR_TX_ADD_TO = 0x25,
|
|
I2C_ERR_RX_ADD_TO = 0x26,
|
|
}I2C_ERR_TYPE, *PI2C_ERR_TYPE;
|
|
|
|
// I2C Time Out type
|
|
typedef enum _I2C_TIMEOUT_TYPE_ {
|
|
I2C_TIMEOOUT_DISABLE = 0x00,
|
|
I2C_TIMEOOUT_ENDLESS = 0xFFFFFFFF,
|
|
}I2C_TIMEOUT_TYPE, *PI2C_TIMEOUT_TYPE;
|
|
|
|
//======================================================
|
|
// SAL I2C related data structures
|
|
// I2C user callback adapter
|
|
typedef struct _SAL_I2C_USERCB_ADPT_ {
|
|
VOID (*USERCB) (VOID *Data);
|
|
u32 USERData;
|
|
}SAL_I2C_USERCB_ADPT, *PSAL_I2C_USERCB_ADPT;
|
|
|
|
// I2C user callback structure
|
|
typedef struct _SAL_I2C_USER_CB_ {
|
|
PSAL_I2C_USERCB_ADPT pTXCB; //I2C Transmit Callback
|
|
PSAL_I2C_USERCB_ADPT pTXCCB; //I2C Transmit Complete Callback
|
|
PSAL_I2C_USERCB_ADPT pRXCB; //I2C Receive Callback
|
|
PSAL_I2C_USERCB_ADPT pRXCCB; //I2C Receive Complete Callback
|
|
PSAL_I2C_USERCB_ADPT pRDREQCB; //I2C Read Request Callback
|
|
PSAL_I2C_USERCB_ADPT pERRCB; //I2C Error Callback
|
|
PSAL_I2C_USERCB_ADPT pDMATXCB; //I2C DMA Transmit Callback
|
|
PSAL_I2C_USERCB_ADPT pDMATXCCB; //I2C DMA Transmit Complete Callback
|
|
PSAL_I2C_USERCB_ADPT pDMARXCB; //I2C DMA Receive Callback
|
|
PSAL_I2C_USERCB_ADPT pDMARXCCB; //I2C DMA Receive Complete Callback
|
|
PSAL_I2C_USERCB_ADPT pGENCALLCB; //I2C General Call Callback
|
|
}SAL_I2C_USER_CB, *PSAL_I2C_USER_CB;
|
|
|
|
// I2C Transmit Buffer
|
|
typedef struct _SAL_I2C_TRANSFER_BUF_ {
|
|
u16 DataLen; //I2C Transmfer Length
|
|
u16 TargetAddr; //I2C Target Address. It's only valid in Master Mode.
|
|
u32 RegAddr; //I2C Register Address. It's only valid in Master Mode.
|
|
u32 RSVD; //
|
|
u8 *pDataBuf; //I2C Transfer Buffer Pointer
|
|
}SAL_I2C_TRANSFER_BUF,*PSAL_I2C_TRANSFER_BUF;
|
|
|
|
typedef struct _SAL_I2C_DMA_USER_DEF_ {
|
|
u8 TxDatSrcWdth;
|
|
u8 TxDatDstWdth;
|
|
u8 TxDatSrcBstSz;
|
|
u8 TxDatDstBstSz;
|
|
u8 TxChNo;
|
|
u8 RSVD0;
|
|
u16 RSVD1;
|
|
u8 RxDatSrcWdth;
|
|
u8 RxDatDstWdth;
|
|
u8 RxDatSrcBstSz;
|
|
u8 RxDatDstBstSz;
|
|
u8 RxChNo;
|
|
u8 RSVD2;
|
|
u16 RSVD3;
|
|
}SAL_I2C_DMA_USER_DEF, *PSAL_I2C_DMA_USER_DEF;
|
|
|
|
// RTK I2C OP
|
|
typedef struct _RTK_I2C_OP_ {
|
|
HAL_Status (*Init) (VOID *Data);
|
|
HAL_Status (*DeInit) (VOID *Data);
|
|
HAL_Status (*Send) (VOID *Data);
|
|
HAL_Status (*Receive) (VOID *Data);
|
|
HAL_Status (*IoCtrl) (VOID *Data);
|
|
HAL_Status (*PowerCtrl) (VOID *Data);
|
|
}RTK_I2C_OP, *PRTK_I2C_OP;
|
|
|
|
// Software API Level I2C Handler
|
|
typedef struct _SAL_I2C_HND_ {
|
|
u8 DevNum; //I2C device number
|
|
u8 PinMux; //I2C pin mux seletion
|
|
u8 OpType; //I2C operation type selection
|
|
volatile u8 DevSts; //I2C device status
|
|
|
|
u8 I2CMaster; //I2C Master or Slave mode
|
|
u8 I2CAddrMod; //I2C 7-bit or 10-bit mode
|
|
u8 I2CSpdMod; //I2C SS/ FS/ HS speed mode
|
|
u8 I2CAckAddr; //I2C target address in Master
|
|
//mode or ack address in Slave
|
|
//mode
|
|
|
|
u16 I2CClk; //I2C bus clock
|
|
u8 MasterRead; //I2C Master Read Supported,
|
|
//An Address will be sent before
|
|
//read data back.
|
|
|
|
u8 I2CDmaSel; //I2C DMA module select
|
|
// 0 for DMA0,
|
|
// 1 for DMA1
|
|
u8 I2CTxDMARqLv; //I2C TX DMA Empty Level
|
|
u8 I2CRxDMARqLv; //I2C RX DMA Full Level
|
|
u16 RSVD0; //Reserved
|
|
|
|
u32 AddRtyTimeOut; //I2C TimeOut Value for master send address retry
|
|
//(Originally Reserved.)
|
|
|
|
u32 I2CExd; //I2C extended options:
|
|
//bit 0: I2C RESTART supported,
|
|
// 0 for NOT supported,
|
|
// 1 for supported
|
|
//bit 1: I2C General Call supported
|
|
// 0 for NOT supported,
|
|
// 1 for supported
|
|
//bit 2: I2C START Byte supported
|
|
// 0 for NOT supported,
|
|
// 1 for supported
|
|
//bit 3: I2C Slave-No-Ack
|
|
// supported
|
|
// 0 for NOT supported,
|
|
// 1 for supported
|
|
//bit 4: I2C bus loading,
|
|
// 0 for 100pf,
|
|
// 1 for 400pf
|
|
//bit 5: I2C slave ack to General
|
|
// Call
|
|
//bit 6: I2C User register address
|
|
//bit 7: I2C 2-Byte User register
|
|
// address
|
|
//bit 8: I2C slave address no ack retry,
|
|
// It's only for Master mode,
|
|
// when slave doesn't ack the
|
|
// address
|
|
//bit 31~bit 8: Reserved
|
|
u32 ErrType; //
|
|
u32 TimeOut; //I2C IO Timeout count, in ms
|
|
|
|
PHAL_I2C_INIT_DAT pInitDat; //Pointer to I2C initial data struct
|
|
PSAL_I2C_TRANSFER_BUF pTXBuf; //Pointer to I2C TX buffer
|
|
PSAL_I2C_TRANSFER_BUF pRXBuf; //Pointer to I2C RX buffer
|
|
PSAL_I2C_USER_CB pUserCB; //Pointer to I2C User Callback
|
|
PSAL_I2C_DMA_USER_DEF pDMAConf; //Pointer to I2C User Define DMA config
|
|
}SAL_I2C_HND, *PSAL_I2C_HND;
|
|
|
|
|
|
|
|
//======================================================
|
|
// I2C SAL Function Prototypes
|
|
|
|
// For checking I2C input index valid or not
|
|
static inline HAL_Status
|
|
RtkI2CIdxChk(
|
|
IN u8 I2CIdx
|
|
)
|
|
{
|
|
if (I2CIdx > I2C3_SEL)
|
|
return HAL_ERR_UNKNOWN;
|
|
|
|
return HAL_OK;
|
|
}
|
|
#if 0
|
|
//For checking I2C operation type valid or not
|
|
static inline HAL_Status
|
|
RtkI2COpTypeChk(
|
|
IN VOID *Data
|
|
)
|
|
{
|
|
PSAL_I2C_HND pSalI2CHND = (PSAL_I2C_HND) Data;
|
|
|
|
if (pSalI2CHND->OpType == I2C_POLL_TYPE)
|
|
return HAL_ERR_UNKNOWN;
|
|
|
|
if (pSalI2CHND->OpType == I2C_DMA_TYPE)
|
|
return HAL_ERR_UNKNOWN;
|
|
|
|
if (pSalI2CHND->OpType == I2C_INTR_TYPE)
|
|
return HAL_ERR_UNKNOWN;
|
|
|
|
pSalI2CHND = pSalI2CHND;
|
|
|
|
return HAL_OK;
|
|
}
|
|
#endif
|
|
//For checking I2C DMA available or not
|
|
static inline HAL_Status
|
|
RtkI2CDMAChk(
|
|
IN VOID *Data
|
|
)
|
|
{
|
|
PSAL_I2C_HND pSalI2CHND = (PSAL_I2C_HND) Data;
|
|
|
|
if (pSalI2CHND->OpType == I2C_DMA_TYPE) {
|
|
if (pSalI2CHND->DevNum >= I2C2_SEL)
|
|
return HAL_ERR_UNKNOWN;
|
|
}
|
|
else {
|
|
return HAL_ERR_UNKNOWN;
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
//For checking I2C DMA available or not
|
|
static inline HAL_Status
|
|
RtkI2CDMAInitChk(
|
|
IN VOID *Data
|
|
)
|
|
{
|
|
PSAL_I2C_HND pSalI2CHND = (PSAL_I2C_HND) Data;
|
|
|
|
if (pSalI2CHND->OpType != I2C_DMA_TYPE) {
|
|
return HAL_ERR_UNKNOWN;
|
|
}
|
|
else {
|
|
return HAL_OK;
|
|
}
|
|
|
|
}
|
|
|
|
//======================================================
|
|
//SAL I2C management function prototype
|
|
_LONG_CALL_ROM_ HAL_Status RtkI2CLoadDefault(IN VOID *Data);
|
|
_LONG_CALL_ROM_ HAL_Status RtkI2CInit(IN VOID *Data);
|
|
_LONG_CALL_ROM_ HAL_Status RtkI2CDeInit(IN VOID *Data);
|
|
_LONG_CALL_ROM_ HAL_Status RtkI2CSend(IN VOID *Data);
|
|
_LONG_CALL_ROM_ HAL_Status RtkI2CReceive(IN VOID *Data);
|
|
_LONG_CALL_ROM_ VOID RtkSalI2COpInit(IN VOID *Data);
|
|
_LONG_CALL_ROM_ HAL_Status RtkI2CSendUserAddr(IN VOID *Data,IN u8 MtrWr);
|
|
_LONG_CALL_ROM_ HAL_Status RtkI2CIoCtrl(IN VOID *Data);
|
|
_LONG_CALL_ROM_ HAL_Status RtkI2CPowerCtrl(IN VOID *Data);
|
|
_LONG_CALL_ HAL_Status RtkI2CInitForPS(IN VOID *Data);
|
|
_LONG_CALL_ HAL_Status RtkI2CDeInitForPS(IN VOID *Data);
|
|
_LONG_CALL_ HAL_Status RtkI2CDisablePS(IN VOID *Data);
|
|
_LONG_CALL_ HAL_Status RtkI2CEnablePS(IN VOID *Data);
|
|
//================= I2C SAL END ===========================
|
|
|
|
|
|
//================= I2C SAL MANAGEMENT START =================
|
|
// I2C SAL management macros
|
|
#define SAL_USER_CB_NUM (sizeof(SAL_I2C_USER_CB) / sizeof(PSAL_I2C_USERCB_ADPT))
|
|
|
|
//======================================================
|
|
// I2C SAL management data structures
|
|
// I2C SAL handle private
|
|
typedef struct _SAL_I2C_HND_PRIV_ {
|
|
VOID **ppSalI2CHnd; //Pointer to SAL_I2C_HND pointer
|
|
SAL_I2C_HND SalI2CHndPriv; //Private SAL_I2C_HND
|
|
}SAL_I2C_HND_PRIV, *PSAL_I2C_HND_PRIV;
|
|
|
|
//I2C SAL management adapter
|
|
typedef struct _SAL_I2C_MNGT_ADPT_ {
|
|
PSAL_I2C_HND_PRIV pSalHndPriv; //Pointer to SAL_I2C_HND
|
|
PHAL_I2C_INIT_DAT pHalInitDat; //Pointer to HAL I2C initial data( HAL_I2C_INIT_DAT )
|
|
PHAL_I2C_OP pHalOp; //Pointer to HAL I2C operation( HAL_I2C_OP )
|
|
VOID (*pHalOpInit)(VOID*); //Pointer to HAL I2C initialize function
|
|
PIRQ_HANDLE pIrqHnd; //Pointer to IRQ handler in SAL layer( IRQ_HANDLE )
|
|
PSAL_I2C_USER_CB pUserCB; //Pointer to SAL user callbacks (SAL_I2C_USER_CB )
|
|
volatile u32 MstRDCmdCnt; //Used for Master Read command count
|
|
volatile u32 InnerTimeOut; //Used for SAL internal timeout count
|
|
VOID (*pSalIrqFunc)(VOID*); //Used for SAL I2C interrupt function
|
|
|
|
PSAL_I2C_DMA_USER_DEF pDMAConf; //Pointer to I2C User Define DMA config
|
|
PHAL_GDMA_ADAPTER pHalTxGdmaAdp; //Pointer to HAL_GDMA_ADAPTER
|
|
PHAL_GDMA_ADAPTER pHalRxGdmaAdp; //Pointer to HAL_GDMA_ADAPTER
|
|
PHAL_GDMA_OP pHalGdmaOp; //Pointer to HAL_GDMA_OP
|
|
VOID (*pHalGdmaOpInit)(VOID*); //Pointer to HAL I2C initialize function
|
|
PIRQ_HANDLE pIrqTxGdmaHnd; //Pointer to IRQ handler for Tx GDMA
|
|
PIRQ_HANDLE pIrqRxGdmaHnd; //Pointer to IRQ handler for Rx GDMA
|
|
VOID (*pSalDMATxIrqFunc)(VOID*); //Used for SAL I2C interrupt function
|
|
VOID (*pSalDMARxIrqFunc)(VOID*); //Used for SAL I2C interrupt function
|
|
u32 RSVD; //Reserved
|
|
}SAL_I2C_MNGT_ADPT, *PSAL_I2C_MNGT_ADPT;
|
|
|
|
//======================================================
|
|
//SAL I2C management function prototype
|
|
PSAL_I2C_MNGT_ADPT RtkI2CGetMngtAdpt(IN u8 I2CIdx);
|
|
HAL_Status RtkI2CFreeMngtAdpt(IN PSAL_I2C_MNGT_ADPT pSalI2CMngtAdpt);
|
|
PSAL_I2C_HND RtkI2CGetSalHnd(IN u8 I2CIdx);
|
|
HAL_Status RtkI2CFreeSalHnd(IN PSAL_I2C_HND pSalI2CHND);
|
|
u32 RtkSalI2CSts(IN VOID *Data);
|
|
|
|
extern _LONG_CALL_ VOID I2CISRHandle(IN VOID *Data);
|
|
extern _LONG_CALL_ VOID I2CTXGDMAISRHandle(IN VOID *Data);
|
|
extern _LONG_CALL_ VOID I2CRXGDMAISRHandle(IN VOID *Data);
|
|
extern HAL_Status I2CIsTimeout (IN u32 StartCount, IN u32 TimeoutCnt);
|
|
extern HAL_TIMER_OP HalTimerOp;
|
|
//======================================================
|
|
// Function Prototypes
|
|
_LONG_CALL_ VOID HalI2COpInit(IN VOID *Data);
|
|
//================= I2C SAL MANAGEMENT END ==================
|
|
|
|
//================= Rtl8195a I2C V02 function prototype ============
|
|
_LONG_CALL_ VOID HalI2COpInitV02(IN VOID *Data);
|
|
_LONG_CALL_ VOID I2CISRHandleV02(IN VOID *Data);
|
|
_LONG_CALL_ HAL_Status RtkI2CSendV02(IN VOID *Data);
|
|
_LONG_CALL_ HAL_Status RtkI2CReceiveV02(IN VOID *Data);
|
|
_LONG_CALL_ VOID RtkSalI2COpInitV02(IN VOID *Data);
|
|
//================= Rtl8195a I2C V02 function prototype END==========
|
|
|
|
//================= Rtl8195a I2C V04 function prototype ============
|
|
_LONG_CALL_ VOID HalI2COpInit_V04(IN VOID *Data);
|
|
_LONG_CALL_ VOID I2CISRHandle_V04(IN VOID *Data);
|
|
//================= Rtl8195a I2C V04 function prototype END==========
|
|
|
|
//======================================================
|
|
//SAL I2C patch function prototype
|
|
HAL_Status RtkI2CSend_Patch(IN VOID *Data);
|
|
HAL_Status RtkI2CReceive_Patch(IN VOID *Data);
|
|
VOID HalI2COpInit_Patch(IN VOID *Data);
|
|
VOID I2CISRHandle_Patch(IN VOID *Data);
|
|
|
|
#ifndef CONFIG_RELEASE_BUILD_LIBRARIES
|
|
#define RtkI2CSend RtkI2CSend_Patch
|
|
#define RtkI2CReceive RtkI2CReceive_Patch
|
|
#endif
|
|
HAL_Status RtkI2CSend_Patch(IN VOID *Data);
|
|
HAL_Status RtkI2CReceive_Patch(IN VOID *Data);
|
|
//================= I2C SAL END ===========================
|
|
|
|
#endif //#ifndef _HAL_I2C_H_
|