mirror of
https://github.com/drasko/open-ameba.git
synced 2024-11-25 15:34:18 +00:00
326 lines
No EOL
13 KiB
Makefile
326 lines
No EOL
13 KiB
Makefile
# RTL8710 Flasher v0.0.alfa
|
|
# pvvx 21.09.2016
|
|
include userset.mk
|
|
include $(SDK_PATH)paths.mk
|
|
#---------------------------
|
|
#FLASHER = stlink-v2-1
|
|
#FLASHER = stlink-v2
|
|
FLASHER ?= Jlink
|
|
JLINK_PATH ?= D:/MCU/SEGGER/JLink_V612i/
|
|
#---------------------------
|
|
# Default
|
|
#---------------------------
|
|
# TARGET dirs
|
|
TARGET ?= build
|
|
OBJ_DIR ?= build/obj
|
|
BIN_DIR ?= build/bin
|
|
ELFFILE ?= $(OBJ_DIR)/$(TARGET).axf
|
|
#---------------------------
|
|
# Compilation tools
|
|
CROSS_COMPILE ?= $(GCC_PATH)arm-none-eabi-
|
|
AR ?= $(CROSS_COMPILE)ar
|
|
CC ?= $(CROSS_COMPILE)gcc
|
|
AS ?= $(CROSS_COMPILE)as
|
|
NM ?= $(CROSS_COMPILE)nm
|
|
LD ?= $(CROSS_COMPILE)gcc
|
|
GDB ?= $(CROSS_COMPILE)gdb
|
|
SIZE ?= $(CROSS_COMPILE)size
|
|
OBJCOPY ?= $(CROSS_COMPILE)objcopy
|
|
OBJDUMP ?= $(CROSS_COMPILE)objdump
|
|
|
|
# Make bunary tools
|
|
TOOLS_PATH ?= component/soc/realtek/8195a/misc/iar_utility/common/tools/
|
|
ifneq ($(shell uname), Linux)
|
|
EXE = .exe
|
|
endif
|
|
PICK = $(TOOLS_PATH)pick$(EXE)
|
|
PADDING = $(TOOLS_PATH)padding$(EXE)
|
|
CHCKSUM = $(TOOLS_PATH)checksum$(EXE)
|
|
|
|
# openocd tools
|
|
OPENOCD = $(OPENOCD_PATH)openocd
|
|
|
|
JLINK_GDB ?= JLinkGDBServer.exe
|
|
JLINK_EXE ?= JLink.exe
|
|
|
|
ifeq ($(FLASHER), Jlink)
|
|
# Jlink FLASHER_SPEED ..4000 kHz
|
|
FLASHER_SPEED = 3500
|
|
else
|
|
ifeq ($(FLASHER),stlink-v2)
|
|
# stlink-v2 FLASHER_SPEED ..1800 kHz
|
|
FLASHER_SPEED = 1800
|
|
else
|
|
# over FLASHER_SPEED ..500 kHz ?
|
|
FLASHER_SPEED = 500
|
|
endif
|
|
endif
|
|
|
|
# COMPILED_BOOT if defined -> extract image1, boot head in elf
|
|
COMPILED_BOOT=1
|
|
# COMPILED_BOOT_BIN if !defined -> use source startup boot
|
|
#COMPILED_BOOT_BIN=1
|
|
# PADDINGSIZE defined -> image2 OTA
|
|
PADDINGSIZE =44k
|
|
|
|
NMAPFILE = $(OBJ_DIR)/$(TARGET).nmap
|
|
|
|
#FLASHER_PATH ?= flasher/
|
|
|
|
#RAM_IMAGE?= $(BIN_DIR)/ram.bin
|
|
|
|
RAM1_IMAGE ?= $(BIN_DIR)/ram_1.bin
|
|
RAM1P_IMAGE ?= $(BIN_DIR)/ram_1.p.bin
|
|
RAM1R_IMAGE ?= $(BIN_DIR)/ram_1.r.bin
|
|
|
|
RAM2_IMAGE = $(BIN_DIR)/ram_2.bin
|
|
RAM2P_IMAGE = $(BIN_DIR)/ram_2.p.bin
|
|
RAM2NS_IMAGE = $(BIN_DIR)/ram_2.ns.bin
|
|
|
|
RAM3_IMAGE = $(BIN_DIR)/sdram.bin
|
|
RAM3P_IMAGE = $(BIN_DIR)/sdram.p.bin
|
|
|
|
FLASH_IMAGE = $(BIN_DIR)/ram_all.bin
|
|
OTA_IMAGE = $(BIN_DIR)/ota.bin
|
|
|
|
#all: FLASH_IMAGE = $(BIN_DIR)/ram_all.bin
|
|
#all: OTA_IMAGE = $(BIN_DIR)/ota.bin
|
|
mp: FLASH_IMAGE = $(BIN_DIR)/ram_all_mp.bin
|
|
mp: OTA_IMAGE = $(BIN_DIR)/ota_mp.bin
|
|
|
|
TST_IMAGE = $(BIN_DIR)/ram_2.bin
|
|
|
|
.PHONY: genbin1 genbin23 flashburn reset test readfullflash flashwebfs flash_OTA
|
|
.NOTPARALLEL: all mp genbin1 genbin23 flashburn reset test readfullflash _endgenbin flashwebfs flash_OTA
|
|
|
|
all: $(ELFFILE) $(OTA_IMAGE) $(FLASH_IMAGE) _endgenbin
|
|
mp: $(ELFFILE) $(OTA_IMAGE) $(FLASH_IMAGE) _endgenbin
|
|
|
|
genbin1: $(ELFFILE) $(RAM1P_IMAGE)
|
|
|
|
genbin23: $(ELFFILE) $(OTA_IMAGE) $(FLASH_IMAGE) _endgenbin
|
|
|
|
|
|
_endgenbin:
|
|
@echo "-----------------------------------------------------------"
|
|
@echo "Image ($(OTA_IMAGE)) size $(shell printf '%d\n' $$(( $$(stat --printf="%s" $(OTA_IMAGE)) )) ) bytes"
|
|
@echo "Image ($(FLASH_IMAGE)) size $(shell printf '%d\n' $$(( $$(stat --printf="%s" $(FLASH_IMAGE)) )) ) bytes"
|
|
@echo "==========================================================="
|
|
|
|
ifeq ($(FLASHER_TYPE), Jlink)
|
|
|
|
reset:
|
|
@$(JLINK_PATH)$(JLINK_EXE) -Device CORTEX-M3 -If SWD -Speed 1000 $(FLASHER_PATH)RTL_Reset.JLinkScript
|
|
|
|
runram:
|
|
@$(JLINK_PATH)$(JLINK_EXE) -Device CORTEX-M3 -If SWD -Speed 1000 $(FLASHER_PATH)RTL_RunRAM.JLinkScript
|
|
|
|
readfullflash:
|
|
@$(JLINK_PATH)$(JLINK_EXE) -Device CORTEX-M3 -If SWD -Speed 1000 $(FLASHER_PATH)RTL_FFlash.JLinkScript
|
|
|
|
|
|
flashburn:
|
|
@echo define call1>$(FLASHER_PATH)flash_file.jlink
|
|
@echo SetFirwareSize build/bin/ram_all.bin>>$(FLASHER_PATH)flash_file.jlink
|
|
@echo end>>$(FLASHER_PATH)flash_file.jlink
|
|
@echo define call2>>$(FLASHER_PATH)flash_file.jlink
|
|
@echo FlasherWrite build/bin/ram_all.bin 0 '$$'Image1Size>>$(FLASHER_PATH)flash_file.jlink
|
|
@echo end>>$(FLASHER_PATH)flash_file.jlink
|
|
@echo define call3>>$(FLASHER_PATH)flash_file.jlink
|
|
@echo FlasherWrite build/bin/ram_all.bin '$$'Image2Addr '$$'Image2Size>>$(FLASHER_PATH)flash_file.jlink
|
|
@echo end>>$(FLASHER_PATH)flash_file.jlink
|
|
@cmd /K start $(JLINK_PATH)$(JLINK_GDBSRV) -device Cortex-M3 -if SWD -ir -endian little -speed 1000
|
|
@$(GDB) -x $(FLASHER_PATH)gdb_wrflash.jlink
|
|
#@taskkill /F /IM $(JLINK_GDBSRV)
|
|
|
|
flashwebfs:
|
|
@echo define call1>$(FLASHER_PATH)file_info.jlink
|
|
@echo set '$$'ImageSize = $(shell printf '0x%X\n' $$(stat --printf="%s" $(BIN_DIR)/WEBFiles.bin))>>$(FLASHER_PATH)file_info.jlink
|
|
@echo set '$$'ImageAddr = 0x0D0000>>$(FLASHER_PATH)file_info.jlink
|
|
@echo end>>$(FLASHER_PATH)file_info.jlink
|
|
@echo define call2>>$(FLASHER_PATH)file_info.jlink
|
|
@echo FlasherWrite $(BIN_DIR)/WEBFiles.bin '$$'ImageAddr '$$'ImageSize>>$(FLASHER_PATH)file_info.jlink
|
|
@echo end>>$(FLASHER_PATH)file_info.jlink
|
|
@cmd /K start $(JLINK_PATH)$(JLINK_GDBSRV) -device Cortex-M3 -if SWD -ir -endian little -speed 1000
|
|
@$(GDB) -x $(FLASHER_PATH)gdb_wrfile.jlink
|
|
#@taskkill /F /IM $(JLINK_GDBSRV)
|
|
|
|
flashespfs:
|
|
@echo define call1>$(FLASHER_PATH)file_info.jlink
|
|
@echo set '$$'ImageSize = $(shell printf '0x%X\n' $$(stat --printf="%s" $(BIN_DIR)/webpages.espfs))>>$(FLASHER_PATH)file_info.jlink
|
|
@echo set '$$'ImageAddr = 0x0D0000>>$(FLASHER_PATH)file_info.jlink
|
|
@echo end>>$(FLASHER_PATH)file_info.jlink
|
|
@echo define call2>>$(FLASHER_PATH)file_info.jlink
|
|
@echo FlasherWrite $(BIN_DIR)/webpages.espfs '$$'ImageAddr '$$'ImageSize>>$(FLASHER_PATH)file_info.jlink
|
|
@echo end>>$(FLASHER_PATH)file_info.jlink
|
|
@cmd /K start $(JLINK_PATH)$(JLINK_GDBSRV) -device Cortex-M3 -if SWD -ir -endian little -speed 1000
|
|
@$(GDB) -x $(FLASHER_PATH)gdb_wrfile.jlink
|
|
#@taskkill /F /IM $(JLINK_GDBSRV)
|
|
|
|
|
|
flash_OTA:
|
|
@cmd /K start $(JLINK_PATH)$(JLINK_GDBSRV) -device Cortex-M3 -if SWD -ir -endian little -speed 1000
|
|
@$(GDB) -x $(FLASHER_PATH)gdb_ota.jlink
|
|
#@taskkill /F /IM $(JLINK_GDBSRV)
|
|
|
|
else
|
|
|
|
flashburn:
|
|
@$(OPENOCD) -f interface/$(FLASHER).cfg -c "transport select swd" -f $(FLASHER_PATH)rtl8710.ocd -c "init" -c "adapter_khz $(FLASHER_SPEED)" -c "reset halt" \
|
|
-c "rtl8710_flash_auto_erase 1" -c "rtl8710_flash_auto_verify 1" \
|
|
-c "rtl8710_flash_write $(RAM1P_IMAGE) 0" \
|
|
-c "rtl8710_flash_write $(RAM2P_IMAGE) 0xb000" \
|
|
-c "rtl8710_reboot" -c "reset run" -c shutdown
|
|
|
|
flashimage2p:
|
|
@$(OPENOCD) -f interface/$(FLASHER).cfg -c "transport select swd" -f $(FLASHER_PATH)rtl8710.ocd -c "init" -c "adapter_khz $(FLASHER_SPEED)" -c "reset halt" \
|
|
-c "rtl8710_flash_auto_erase 1" -c "rtl8710_flash_auto_verify 1" \
|
|
-c "rtl8710_flash_write $(RAM2P_IMAGE) 0xb000" \
|
|
-c "rtl8710_reboot" -c "reset run" -c shutdown
|
|
|
|
flashwebfs:
|
|
@$(OPENOCD) -f interface/$(FLASHER).cfg -c "transport select swd" -f $(FLASHER_PATH)rtl8710.ocd -c "init" -c "adapter_khz $(FLASHER_SPEED)" -c "reset halt" \
|
|
-c "rtl8710_flash_auto_erase 1" -c "rtl8710_flash_auto_verify 1" \
|
|
-c "rtl8710_flash_write $(BIN_DIR)/WEBFiles.bin 0xd0000" \
|
|
-c "rtl8710_reboot" -c "reset run" -c shutdown
|
|
|
|
flashespfs:
|
|
@$(OPENOCD) -f interface/$(FLASHER).cfg -c "transport select swd" -f $(FLASHER_PATH)rtl8710.ocd -c "init" -c "adapter_khz $(FLASHER_SPEED)" -c "reset halt" \
|
|
-c "rtl8710_flash_auto_erase 1" -c "rtl8710_flash_auto_verify 1" \
|
|
-c "rtl8710_flash_write $(BIN_DIR)/webpages.espfs 0xd0000" \
|
|
-c "rtl8710_reboot" -c "reset run" -c shutdown
|
|
|
|
reset:
|
|
# @$(JLINK_PATH)$(JLINK_EXE) -Device CORTEX-M3 -If SWD -Speed $(FLASHER_SPEED) flasher/RTLreset.JLinkScript
|
|
@$(OPENOCD) -f interface/$(FLASHER).cfg -c "transport select swd" -f $(FLASHER_PATH)rtl8710.ocd -c "init" -c "adapter_khz $(FLASHER_SPEED)" -c "reset halt" \
|
|
-c "rtl8710_reboot" -c shutdown
|
|
|
|
runram:
|
|
# @$(JLINK_PATH)$(JLINK_GDB) -device Cortex-M3 -if SWD -ir -endian little -speed $(FLASHER_SPEED)
|
|
# @$(GDB) -x flasher/gdb_run_ram.jlink
|
|
# @taskkill.exe -F -IM $(JLINK_GDB)
|
|
@$(OPENOCD) -f interface/$(FLASHER).cfg -c "transport select swd" -f $(FLASHER_PATH)rtl8710.ocd -c "init" -c "adapter_khz $(FLASHER_SPEED)" -c "reset halt" \
|
|
-c "load_image $(RAM1R_IMAGE) 0x10000bc8 bin" \
|
|
-c "load_image $(RAM2_IMAGE) 0x10006000 bin" \
|
|
-c "mww 0x40000210 0x20200113" \
|
|
-c "reset run" -c shutdown
|
|
|
|
endif
|
|
|
|
$(NMAPFILE): $(ELFFILE)
|
|
@echo "==========================================================="
|
|
@echo "Build names map file"
|
|
@echo $@
|
|
@$(NM) $< | sort > $@
|
|
# @echo "==========================================================="
|
|
|
|
$(FLASH_IMAGE): $(RAM1P_IMAGE) $(RAM2P_IMAGE) $(RAM3P_IMAGE)
|
|
@echo "==========================================================="
|
|
@echo "Make Flash image ($(FLASH_IMAGE))"
|
|
# @echo "==========================================================="
|
|
@mkdir -p $(BIN_DIR)
|
|
@rm -f $(FLASH_IMAGE)
|
|
@cat $(RAM1P_IMAGE) > $(FLASH_IMAGE)
|
|
# @chmod 777 $(FLASH_IMAGE)
|
|
ifdef PADDINGSIZE
|
|
@$(PADDING) $(PADDINGSIZE) 0xFF $(FLASH_IMAGE)
|
|
endif
|
|
@cat $(RAM2P_IMAGE) >> $(FLASH_IMAGE)
|
|
@cat $(RAM3P_IMAGE) >> $(FLASH_IMAGE)
|
|
# @echo "Image ($(FLASH_IMAGE)) size $(shell printf '%d\n' $$(( $$(stat --printf="%s" $(FLASH_IMAGE)) )) ) bytes"
|
|
# @echo "==========================================================="
|
|
# @rm $(BIN_DIR)/ram_*.p.bin
|
|
|
|
$(OTA_IMAGE): $(RAM2NS_IMAGE) $(RAM3_IMAGE)
|
|
@echo "==========================================================="
|
|
@echo "Make OTA image ($(OTA_IMAGE))"
|
|
@rm -f $(OTA_IMAGE)
|
|
@cat $(RAM2NS_IMAGE) > $(OTA_IMAGE)
|
|
@cat $(RAM3P_IMAGE) >> $(OTA_IMAGE)
|
|
# @chmod 777 $(OTA_IMAGE)
|
|
@$(CHCKSUM) $(OTA_IMAGE) || true
|
|
# @echo "==========================================================="
|
|
|
|
$(RAM1P_IMAGE): $(ELFFILE) $(NMAPFILE)
|
|
@echo "==========================================================="
|
|
@echo "Create image1r ($(RAM1R_IMAGE))"
|
|
# @echo "===========================================================" .bootloader
|
|
ifdef COMPILED_BOOT
|
|
@mkdir -p $(BIN_DIR)
|
|
@rm -f $(RAM1_IMAGE) $(RAM1R_IMAGE)
|
|
ifdef COMPILED_BOOT_BIN
|
|
@$(eval RAM1_START_ADDR := $(shell grep _binary_build_bin_ram_1_r_bin_start $(NMAPFILE) | awk '{print $$1}'))
|
|
@$(eval RAM1_END_ADDR := $(shell grep _binary_build_bin_ram_1_r_bin_end $(NMAPFILE) | awk '{print $$1}'))
|
|
else
|
|
@$(eval RAM1_START_ADDR := $(shell grep __ram_image1_text_start__ $(NMAPFILE) | awk '{print $$1}'))
|
|
@$(eval RAM1_END_ADDR := $(shell grep __ram_image1_text_end__ $(NMAPFILE) | awk '{print $$1}'))
|
|
endif
|
|
$(if $(RAM1_START_ADDR),,$(error "Not found __ram_image1_text_start__!"))
|
|
$(if $(RAM1_END_ADDR),,$(error "Not found __ram_image1_text_end__!"))
|
|
ifeq ($(RAM1_START_ADDR),$(RAM1_END_ADDR))
|
|
ifdef COMPILED_BOOT_BIN
|
|
$(OBJCOPY) --change-section-address .boot.head=0x10000ba8 -j .boot.head -j .bootloader -Obinary $(ELFFILE) $(RAM1P_IMAGE)
|
|
else
|
|
# $(OBJCOPY) -j .rom_ram -Obinary $(ELFFILE) $(RAM_IMAGE)
|
|
$(OBJCOPY) -j .ram.start.table -j .ram_image1.text -Obinary $(ELFFILE) $(RAM1R_IMAGE)
|
|
$(PICK) 0x$(RAM1_START_ADDR) 0x$(RAM1_END_ADDR) $(RAM1R_IMAGE) $(RAM1P_IMAGE) head+reset_offset 0x0B000
|
|
endif
|
|
else
|
|
$(error "BOOT-image size = 0")
|
|
# $(error Flasher: COMPILE_BOOT = No)
|
|
endif
|
|
else
|
|
@if [ -s $(RAM1R_IMAGE) ]; then echo "Use external $(RAM1R_IMAGE)!"; fi
|
|
endif
|
|
|
|
$(RAM2P_IMAGE): $(ELFFILE) $(NMAPFILE)
|
|
@echo "==========================================================="
|
|
@echo "Create image2p ($(RAM2P_IMAGE))"
|
|
# @echo "==========================================================="
|
|
@mkdir -p $(BIN_DIR)
|
|
@rm -f $(RAM2_IMAGE) $(RAM2P_IMAGE)
|
|
@$(eval RAM2_START_ADDR = $(shell grep __ram_image2_text $(NMAPFILE) | grep _start__ | awk '{print $$1}'))
|
|
@$(eval RAM2_END_ADDR = $(shell grep __ram_image2_text $(NMAPFILE) | grep _end__ | awk '{print $$1}'))
|
|
$(if $(RAM2_START_ADDR),,$(error "Not found __ram_image2_text_start__!"))
|
|
$(if $(RAM2_END_ADDR),,$(error "Not found __ram_image2_text_end__!"))
|
|
@$(OBJCOPY) -j .image2.start.table -j .ram_image2.text -j .ram_image2.rodata -j .ram.data -Obinary $(ELFFILE) $(RAM2_IMAGE)
|
|
@$(PICK) 0x$(RAM2_START_ADDR) 0x$(RAM2_END_ADDR) $(RAM2_IMAGE) $(RAM2P_IMAGE) body+reset_offset+sig
|
|
|
|
$(RAM2NS_IMAGE):$(ELFFILE) $(NMAPFILE)
|
|
@echo "==========================================================="
|
|
@echo "Create image2ns ($(RAM2NS_IMAGE))"
|
|
# @echo "==========================================================="
|
|
mkdir -p $(BIN_DIR)
|
|
rm -f $(RAM2_IMAGE) $(RAM2NS_IMAGE)
|
|
$(eval RAM2_START_ADDR = $(shell grep __ram_image2_text $(NMAPFILE) | grep _start__ | awk '{print $$1}'))
|
|
$(eval RAM2_END_ADDR = $(shell grep __ram_image2_text $(NMAPFILE) | grep _end__ | awk '{print $$1}'))
|
|
$(if $(RAM2_START_ADDR),,$(error "Not found __ram_image2_text_start__!"))
|
|
$(if $(RAM2_END_ADDR),,$(error "Not found __ram_image2_text_end__!"))
|
|
$(OBJCOPY) -j .image2.start.table -j .ram_image2.text -j .ram_image2.rodata -j .ram.data -Obinary $(ELFFILE) $(RAM2_IMAGE)
|
|
$(PICK) 0x$(RAM2_START_ADDR) 0x$(RAM2_END_ADDR) $(RAM2_IMAGE) $(RAM2NS_IMAGE) body+reset_offset
|
|
|
|
$(RAM3_IMAGE): $(ELFFILE) $(NMAPFILE)
|
|
@echo "==========================================================="
|
|
@echo "Create image3 (SDRAM, $(RAM3P_IMAGE))"
|
|
# @echo "==========================================================="
|
|
@mkdir -p $(BIN_DIR)
|
|
@rm -f $(RAM3_IMAGE) $(RAM3P_IMAGE)
|
|
@$(eval RAM3_START_ADDR = $(shell grep __sdram_data_ $(NMAPFILE) | grep _start__ | awk '{print $$1}'))
|
|
@$(eval RAM3_END_ADDR = $(shell grep __sdram_data_ $(NMAPFILE) | grep _end__ | awk '{print $$1}'))
|
|
$(if $(RAM3_START_ADDR),,$(error "Not found __sdram_data_start__!"))
|
|
$(if $(RAM3_END_ADDR),,$(error "Not found __sdram_data_end__!"))
|
|
#ifneq ($(RAM3_START_ADDR),$(RAM3_END_ADDR))
|
|
@echo $(RAM3_START_ADDR) $(RAM3_END_ADDR)
|
|
@$(OBJCOPY) -j .image3 -j .sdr_text -j .sdr_rodata -j .sdr_data -Obinary $(ELFFILE) $(RAM3_IMAGE)
|
|
$(PICK) 0x$(RAM3_START_ADDR) 0x$(RAM3_END_ADDR) $(RAM3_IMAGE) $(RAM3P_IMAGE) body+reset_offset
|
|
#else
|
|
# @rm -f $(RAM3_IMAGE) $(RAM3P_IMAGE)
|
|
# @echo "SDRAM not used (size = 0)"
|
|
#endif
|
|
|
|
$(ELFFILE):
|
|
$(error Falsher: file $@ not found)
|
|
|
|
clean:
|
|
@rm -f $(BIN_DIR)/*.bin
|
|
|