open-ameba/RTL00_SDKV35a/component/soc/realtek/8195a/fwlib/hal_adc.h

/*
 *  Routines to access hardware
 *
 *  Copyright (c) 2013 Realtek Semiconductor Corp.
 *
 *  This module is a confidential and proprietary property of RealTek and
 *  possession or use of this module requires written permission of RealTek.
 */

#ifndef _HAL_ADC_H_
#define _HAL_ADC_H_

#include "rtl8195a.h"
#include "rtl8195a_adc.h"
#include "hal_gdma.h"

//================ ADC Configuration  =========================
#define ADC_INTR_OP_TYPE    1
#define ADC_DMA_OP_TYPE     1

// ADC SAL management macros
#define SAL_ADC_USER_CB_NUM     (sizeof(SAL_ADC_USER_CB) / sizeof(PSAL_ADC_USERCB_ADPT))

// ADC used module. 
// Please set the ADC module flag to 1 to enable the related 
#define ADC0_USED                   1
#define ADC1_USED                   1
#define ADC2_USED                   1
#define ADC3_USED                   1


//================ Debug MSG Definition =======================
#define ADC_PREFIX      "RTL8195A[adc]: "
#define ADC_PREFIX_LVL  "    [ADC_DBG]: "

typedef enum _ADC_DBG_LVL_ {
    HAL_ADC_LVL         =   0x01,
    SAL_ADC_LVL         =   0x02,
    VERI_ADC_LVL        =   0x04,
}ADC_DBG_LVL,*PADC_DBG_LVL;

#if CONFIG_DEBUG_LOG > 0
#ifdef CONFIG_DEBUG_LOG_ADC_HAL

    #define DBG_8195A_ADC(...)  do{ \
        _DbgDump(ADC_PREFIX __VA_ARGS__);\
    }while(0)


    #define ADCDBGLVL   0xFF   
    #define DBG_8195A_ADC_LVL(LVL,...)  do{\
            if (LVL&ADCDBGLVL){\
                _DbgDump(ADC_PREFIX_LVL __VA_ARGS__);\
            }\
    }while(0)
#else
    #define DBG_ADC_LOG_PERD    100
    #define DBG_8195A_ADC(...)
    #define DBG_8195A_ADC_LVL(...)
#endif
#endif


//================ ADC HAL Related Enumeration ==================
// ADC Module Selection 
typedef enum _ADC_MODULE_SEL_ {
        ADC0_SEL    =   0x0,
        ADC1_SEL    =   0x1,
        ADC2_SEL    =   0x2,
        ADC3_SEL    =   0x3,
}ADC_MODULE_SEL,*PADC_MODULE_SEL;

// ADC module status 
typedef enum _ADC_MODULE_STATUS_ {
    ADC_DISABLE     =   0x0,
    ADC_ENABLE      =   0x1,
}ADC_MODULE_STATUS, *PADC_MODULE_STATUS;

// ADC Data Endian
typedef enum _ADC_DATA_ENDIAN_ {
    ADC_DATA_ENDIAN_LITTLE      =   0x0,
    ADC_DATA_ENDIAN_BIG         =   0x1,
}ADC_DATA_ENDIAN,*PADC_DATA_ENDIAN;

// ADC Debug Select
typedef enum _ADC_DEBUG_SEL_ {
    ADC_DBG_SEL_DISABLE         =   0x0,
    ADC_DBG_SEL_ENABLE          =   0x1,
}ADC_DEBUG_SEL,*PADC_DEBUG_SEL;

typedef enum _ADC_COMPARE_SET_ {
    ADC_COMP_SMALLER_THAN       =   0x0,
    ADC_COMP_GREATER_THAN       =   0x1,
}ADC_COMPARE_SET, *PADC_COMPARE_SET;

// ADC feature status 
typedef enum _ADC_FEATURE_STATUS_{
    ADC_FEATURE_DISABLED    =   0,
    ADC_FEATURE_ENABLED     =   1,
}ADC_FEATURE_STATUS,*PADC_FEATURE_STATUS;

// ADC operation type
typedef enum _ADC_OP_TYPE_ {
    ADC_RDREG_TYPE  =   0x0,
    ADC_DMA_TYPE    =   0x1,
    ADC_INTR_TYPE   =   0x2,
}ADC_OP_TYPE, *PADC_OP_TYPE;

// ADC device status 
typedef enum _ADC_DEVICE_STATUS_ {
    ADC_STS_UNINITIAL   =   0x00,
    ADC_STS_INITIALIZED =   0x01,
    ADC_STS_IDLE        =   0x02,
    
    ADC_STS_TX_READY    =   0x03,    
    ADC_STS_TX_ING      =   0x04,
    
    ADC_STS_RX_READY    =   0x05,
    ADC_STS_RX_ING      =   0x06,

    ADC_STS_ERROR       =   0x07,
    ADC_STS_FULL        =   0x08,
}ADC_DEVICE_STATUS, *PADC_DEVICE_STATUS;

// ADC error type
typedef enum _ADC_ERR_TYPE_ {
    ADC_ERR_FIFO_RD_ERROR           =   0x40,       //ADC FIFO read error
}ADC_ERR_TYPE, *PADC_ERR_TYPE;

// ADC initial status
typedef enum _ADC_INITAIL_STATUS_ {
    ADC0_INITED     =   0x1,
    ADC1_INITED     =   0x2,
    ADC2_INITED     =   0x4,
    ADC3_INITED     =   0x8,
}ADC_INITAIL_STATUS, *PADC_INITAIL_STATUS;


//================ ADC HAL Data Structure ======================
// ADC HAL initial data structure
typedef struct _HAL_ADC_INIT_DAT_ {
    u8                  ADCIdx;         //ADC index used
    u8                  ADCEn;          //ADC module enable
    u8                  ADCEndian;      //ADC endian selection, 
                                        //but actually it's for 32-bit ADC data swap control
                                        //1'b0: no swap, 
                                        //1'b1: swap the upper 16-bit and the lower 16-bit
    u8                  ADCBurstSz;     //ADC DMA operation threshold

    u8                  ADCCompOnly;    //ADC compare mode only enable (without FIFO enable)
    u8                  ADCOneShotEn;   //ADC one-shot mode enable
    u8                  ADCOverWREn;    //ADC overwrite mode enable
    u8                  ADCOneShotTD;   //ADC one shot mode threshold

    u16                 ADCCompCtrl;    //ADC compare mode control,
                                        //1'b0:less than the compare threshold
                                        //1'b1:greater than the compare threshod
    u16                 ADCCompTD;      //ADC compare mode threshold
    
    u8                  ADCDataRate;    //ADC down sample data rate, 
    u8                  ADCAudioEn;     //ADC audio mode enable
    u8                  ADCEnManul;     //ADC enable manually
    u8                  ADCDbgSel;
    
    u32                  RSVD0;
    
    u32                 *ADCData;       //ADC data pointer
    u32                 ADCPWCtrl;      //ADC0 power control
    u32                 ADCIntrMSK;     //ADC Interrupt Mask
    u32                 ADCAnaParAd3;   //ADC analog parameter 3
    u32                 ADCInInput;     //ADC Input is internal?
}HAL_ADC_INIT_DAT,*PHAL_ADC_INIT_DAT;

// ADC HAL Operations
typedef struct _HAL_ADC_OP_ {
    RTK_STATUS  (*HalADCInit)       (VOID *Data);   //HAL ADC initialization
    RTK_STATUS  (*HalADCDeInit)     (VOID *Data);   //HAL ADC de-initialization
    RTK_STATUS  (*HalADCEnable)     (VOID *Data);   //HAL ADC de-initialization
    u32         (*HalADCReceive)    (VOID *Data);   //HAL ADC receive
    RTK_STATUS  (*HalADCIntrCtrl)   (VOID *Data);   //HAL ADC interrupt control
    u32         (*HalADCReadReg)    (VOID *Data, u8 ADCReg);//HAL ADC read register
}HAL_ADC_OP, *PHAL_ADC_OP;

// ADC user callback adapter
typedef struct _SAL_ADC_USERCB_ADPT_ {
    VOID (*USERCB)      (VOID *Data);
    u32  USERData;
}SAL_ADC_USERCB_ADPT, *PSAL_ADC_USERCB_ADPT;

// ADC user callback structure
typedef struct _SAL_ADC_USER_CB_ {
    PSAL_ADC_USERCB_ADPT    pTXCB;          //ADC Transmit Callback
    PSAL_ADC_USERCB_ADPT    pTXCCB;         //ADC Transmit Complete Callback
    PSAL_ADC_USERCB_ADPT    pRXCB;          //ADC Receive Callback
    PSAL_ADC_USERCB_ADPT    pRXCCB;         //ADC Receive Complete Callback
    PSAL_ADC_USERCB_ADPT    pRDREQCB;       //ADC Read Request Callback
    PSAL_ADC_USERCB_ADPT    pERRCB;         //ADC Error Callback
    PSAL_ADC_USERCB_ADPT    pDMATXCB;       //ADC DMA Transmit Callback
    PSAL_ADC_USERCB_ADPT    pDMATXCCB;      //ADC DMA Transmit Complete Callback
    PSAL_ADC_USERCB_ADPT    pDMARXCB;       //ADC DMA Receive Callback
    PSAL_ADC_USERCB_ADPT    pDMARXCCB;      //ADC DMA Receive Complete Callback
}SAL_ADC_USER_CB, *PSAL_ADC_USER_CB;

// ADC Transmit Buffer
typedef struct _SAL_ADC_TRANSFER_BUF_ {
    u32     DataLen;                        //ADC Transmfer Length
    u32     *pDataBuf;                      //ADC Transfer Buffer Pointer
    u32     RSVD;                           //
}SAL_ADC_TRANSFER_BUF,*PSAL_ADC_TRANSFER_BUF;

typedef struct _SAL_ADC_DMA_USER_DEF_ {
    
    u8      TxDatSrcWdth;
    u8      TxDatDstWdth;
    u8      TxDatSrcBstSz;
    u8      TxDatDstBstSz;

    u8      TxChNo;
    u8      LlpCtrl;
    u16     RSVD0;

    u32     MaxMultiBlk;    
    u32     pLlix;
    u32     pBlockSizeList;
}SAL_ADC_DMA_USER_DEF, *PSAL_ADC_DMA_USER_DEF;

// Software API Level ADC Handler 
typedef struct _SAL_ADC_HND_ {
    u8                      DevNum;             //ADC device number
    u8                      PinMux;             //ADC pin mux seletion
    u8                      OpType;             //ADC operation type selection
    volatile u8             DevSts;             //ADC device status
    
    u32                     ADCExd;             //ADC extended options:
                                                //bit 0: example
                                                //bit 31~bit 1: Reserved
    u32                     ErrType;            //
    u32                     TimeOut;            //ADC IO Timeout count
                                                                            
    PHAL_ADC_INIT_DAT       pInitDat;           //Pointer to ADC initial data struct
    PSAL_ADC_TRANSFER_BUF   pRXBuf;             //Pointer to ADC TX buffer
    PSAL_ADC_USER_CB        pUserCB;            //Pointer to ADC User Callback
}SAL_ADC_HND, *PSAL_ADC_HND;

// ADC SAL handle private 
typedef struct _SAL_ADC_HND_PRIV_ {
    VOID            **ppSalADCHnd;              //Pointer to SAL_ADC_HND pointer
    SAL_ADC_HND     SalADCHndPriv;              //Private SAL_ADC_HND
}SAL_ADC_HND_PRIV, *PSAL_ADC_HND_PRIV;

//ADC SAL management adapter
typedef struct _SAL_ADC_MNGT_ADPT_ {
    PSAL_ADC_HND_PRIV       pSalHndPriv;        //Pointer to SAL_ADC_HND
    PHAL_ADC_INIT_DAT       pHalInitDat;        //Pointer to HAL ADC initial data( HAL_ADC_INIT_DAT )
    PHAL_ADC_OP             pHalOp;             //Pointer to HAL ADC operation( HAL_ADC_OP )
    VOID                    (*pHalOpInit)(VOID*);//Pointer to HAL ADC initialize function

    PIRQ_HANDLE             pIrqHnd;            //Pointer to IRQ handler in SAL layer( IRQ_HANDLE )
    VOID                    (*pSalIrqFunc)(VOID*);      //Used for SAL ADC interrupt function

    PSAL_ADC_DMA_USER_DEF   pDMAConf;                   //Pointer to DAC User Define DMA config
    PHAL_GDMA_ADAPTER       pHalGdmaAdp;
    PHAL_GDMA_OP            pHalGdmaOp;
    PIRQ_HANDLE             pIrqGdmaHnd;
    VOID                    (*pHalGdmaOpInit)(VOID*);   //Pointer to HAL DAC initialize function    
    PSAL_ADC_USER_CB        pUserCB;                    //Pointer to SAL user callbacks (SAL_ADC_USER_CB )
    VOID                    (*pSalDMAIrqFunc)(VOID*);   //Used for SAL DAC interrupt function
}SAL_ADC_MNGT_ADPT, *PSAL_ADC_MNGT_ADPT;


//================ ADC HAL Function Prototype ===================
// ADC HAL inline function
// For checking I2C input index valid or not
static inline RTK_STATUS
RtkADCIdxChk(
    IN  u8  ADCIdx
)
{
#if !ADC0_USED
    if (ADCIdx == ADC0_SEL)
        return _EXIT_FAILURE;
#endif

#if !ADC1_USED
    if (ADCIdx == ADC1_SEL)
        return _EXIT_FAILURE;
#endif

#if !ADC2_USED
    if (ADCIdx == ADC2_SEL)
        return _EXIT_FAILURE;
#endif

#if !ADC3_USED
        if (ADCIdx == ADC3_SEL)
            return _EXIT_FAILURE;
#endif
	ADCIdx++; //for compile warning.
    return _EXIT_SUCCESS;
}

VOID HalADCOpInit(IN VOID *Data);
PSAL_ADC_HND RtkADCGetSalHnd(IN  u8  DACIdx);
RTK_STATUS RtkADCFreeSalHnd(IN  PSAL_ADC_HND    pSalADCHND);
RTK_STATUS RtkADCLoadDefault(IN  VOID *Data);
RTK_STATUS RtkADCInit(IN  VOID *Data);
RTK_STATUS RtkADCDeInit(IN  VOID *Data);
//RTK_STATUS RtkADCReceive(IN  VOID *Data);
u32 RtkADCReceive(IN  VOID *Data);
u32 RtkADCReceiveBuf(IN  VOID *Data,IN  u32  *pBuf);
u32 RtkADCRxManualRotate(IN  VOID *Data,IN  u32  *pBuf);

PSAL_ADC_MNGT_ADPT RtkADCGetMngtAdpt(IN  u8  ADCIdx);
RTK_STATUS RtkADCFreeMngtAdpt(IN  PSAL_ADC_MNGT_ADPT  pSalADCMngtAdpt);
VOID ADCISRHandle(IN  VOID *Data);
VOID ADCGDMAISRHandle(IN  VOID *Data);
HAL_Status RtkADCDisablePS(IN  VOID *Data);
HAL_Status RtkADCEnablePS(IN  VOID *Data);

#endif