/** ****************************************************************************** * @file lwipopts.h * @author MCD Application Team * @version V1.1.0 * @date 07-October-2011 * @brief lwIP Options Configuration. * This file is based on Utilities\lwip_v1.3.2\src\include\lwip\opt.h * and contains the lwIP configuration for the STM32F2x7 demonstration. ****************************************************************************** * @attention * * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * *

© COPYRIGHT 2011 STMicroelectronics

****************************************************************************** */ #ifndef __LWIPOPTS_H__ #define __LWIPOPTS_H__ #include #include "platform_opts.h" #define WIFI_LOGO_CERTIFICATION_CONFIG 0 //for ping 10k test buffer setting /** * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain * critical regions during buffer allocation, deallocation and memory * allocation and deallocation. */ #define SYS_LIGHTWEIGHT_PROT 1 /* Define LWIP_COMPAT_MUTEX if the port has no mutexes and binary semaphores should be used instead */ #define LWIP_COMPAT_MUTEX 1 #define ETHARP_TRUST_IP_MAC 0 #define IP_REASSEMBLY 1 #define IP_FRAG 1 #define ARP_QUEUEING 0 /** * NO_SYS==1: Provides VERY minimal functionality. Otherwise, * use lwIP facilities. */ #define NO_SYS 0 /* ---------- Memory options ---------- */ /* MEM_ALIGNMENT: should be set to the alignment of the CPU for which lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2 byte alignment -> define MEM_ALIGNMENT to 2. */ #define MEM_ALIGNMENT 4 /* MEM_SIZE: the size of the heap memory. If the application will send a lot of data that needs to be copied, this should be set high. */ #if WIFI_LOGO_CERTIFICATION_CONFIG #define MEM_SIZE (10*1024) //for ping 10k test #else #define MEM_SIZE (5*1024) #endif /* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application sends a lot of data out of ROM (or other static memory), this should be set high. */ #define MEMP_NUM_PBUF 100 /* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One per active UDP "connection". */ #define MEMP_NUM_UDP_PCB 6 /* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. */ #define MEMP_NUM_TCP_PCB 10 /* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. */ #define MEMP_NUM_TCP_PCB_LISTEN 5 /* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. */ #define MEMP_NUM_TCP_SEG 20 /* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. */ #define MEMP_NUM_SYS_TIMEOUT 10 /* ---------- Pbuf options ---------- */ /* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ #if WIFI_LOGO_CERTIFICATION_CONFIG #define PBUF_POOL_SIZE 30 //for ping 10k test #else #define PBUF_POOL_SIZE 20 #endif /* IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.*/ #if WIFI_LOGO_CERTIFICATION_CONFIG #define IP_REASS_MAX_PBUFS 30 //for ping 10k test #else #define IP_REASS_MAX_PBUFS 10 #endif /* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */ #define PBUF_POOL_BUFSIZE 500 /* ---------- TCP options ---------- */ #define LWIP_TCP 1 #define TCP_TTL 255 /* Controls if TCP should queue segments that arrive out of order. Define to 0 if your device is low on memory. */ #define TCP_QUEUE_OOSEQ 1 /* TCP Maximum segment size. */ #define TCP_MSS (1500 - 40) /* TCP_MSS = (Ethernet MTU - IP header size - TCP header size) */ /* TCP sender buffer space (bytes). */ #define TCP_SND_BUF (5*TCP_MSS) /* TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. */ #define TCP_SND_QUEUELEN (4* TCP_SND_BUF/TCP_MSS) /* TCP receive window. */ #define TCP_WND (2*TCP_MSS) /* ---------- ICMP options ---------- */ #define LWIP_ICMP 1 /* ---------- ARP options ----------- */ #define LWIP_ARP 1 /* ---------- DHCP options ---------- */ /* Define LWIP_DHCP to 1 if you want DHCP configuration of interfaces. DHCP is not implemented in lwIP 0.5.1, however, so turning this on does currently not work. */ #define LWIP_DHCP 1 /* ---------- UDP options ---------- */ #define LWIP_UDP 1 #define UDP_TTL 255 /* ---------- DNS options ---------- */ #define LWIP_DNS 1 /* ---------- UPNP options --------- */ #define LWIP_UPNP 0 /* Support Multicast */ #define LWIP_IGMP 1 #define LWIP_RAND() rand() /* Support TCP Keepalive */ #define LWIP_TCP_KEEPALIVE 1 /*LWIP_UART_ADAPTER==1: Enable LWIP_UART_ADAPTER when CONFIG_GAGENT is enabled, because some GAGENT functions denpond on the following macro definitions.*/ #if CONFIG_EXAMPLE_UART_ADAPTER #define LWIP_UART_ADAPTER 1 #else #define LWIP_UART_ADAPTER 0 #endif #if LWIP_UART_ADAPTER #undef LWIP_SO_SNDTIMEO #define LWIP_SO_SNDTIMEO 1 #undef SO_REUSE #define SO_REUSE 1 #undef MEMP_NUM_NETCONN #define MEMP_NUM_NETCONN 10 #undef TCP_WND #define TCP_WND (4*TCP_MSS) #define TCP_KEEPIDLE_DEFAULT 10000UL #define TCP_KEEPINTVL_DEFAULT 1000UL #define TCP_KEEPCNT_DEFAULT 10U #endif #if CONFIG_EXAMPLE_UART_ATCMD #undef LWIP_SO_SNDTIMEO #define LWIP_SO_SNDTIMEO 1 #undef SO_REUSE #define SO_REUSE 1 #undef MEMP_NUM_NETCONN #define MEMP_NUM_NETCONN 10 #undef MEMP_NUM_TCP_PCB #define MEMP_NUM_TCP_PCB (MEMP_NUM_NETCONN) #undef MEMP_NUM_UDP_PCB #define MEMP_NUM_UDP_PCB (MEMP_NUM_NETCONN) #undef TCP_WND #define TCP_WND (4*TCP_MSS) #define TCP_KEEPIDLE_DEFAULT 10000UL #define TCP_KEEPINTVL_DEFAULT 1000UL #define TCP_KEEPCNT_DEFAULT 10U #define ERRNO 1 #endif /* ---------- Statistics options ---------- */ #define LWIP_STATS 0 #define LWIP_PROVIDE_ERRNO 1 /* -------------------------------------- ---------- Checksum options ---------- -------------------------------------- */ /* The STM32F2x7 allows computing and verifying the IP, UDP, TCP and ICMP checksums by hardware: - To use this feature let the following define uncommented. - To disable it and process by CPU comment the the checksum. */ //Do checksum by lwip - WLAN nic does not support Checksum offload //#define CHECKSUM_BY_HARDWARE #ifdef CHECKSUM_BY_HARDWARE /* CHECKSUM_GEN_IP==0: Generate checksums by hardware for outgoing IP packets.*/ #define CHECKSUM_GEN_IP 0 /* CHECKSUM_GEN_UDP==0: Generate checksums by hardware for outgoing UDP packets.*/ #define CHECKSUM_GEN_UDP 0 /* CHECKSUM_GEN_TCP==0: Generate checksums by hardware for outgoing TCP packets.*/ #define CHECKSUM_GEN_TCP 0 /* CHECKSUM_CHECK_IP==0: Check checksums by hardware for incoming IP packets.*/ #define CHECKSUM_CHECK_IP 0 /* CHECKSUM_CHECK_UDP==0: Check checksums by hardware for incoming UDP packets.*/ #define CHECKSUM_CHECK_UDP 0 /* CHECKSUM_CHECK_TCP==0: Check checksums by hardware for incoming TCP packets.*/ #define CHECKSUM_CHECK_TCP 0 #else /* CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.*/ #define CHECKSUM_GEN_IP 1 /* CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.*/ #define CHECKSUM_GEN_UDP 1 /* CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.*/ #define CHECKSUM_GEN_TCP 1 /* CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.*/ #define CHECKSUM_CHECK_IP 1 /* CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.*/ #define CHECKSUM_CHECK_UDP 1 /* CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.*/ #define CHECKSUM_CHECK_TCP 1 #endif /* ---------------------------------------------- ---------- Sequential layer options ---------- ---------------------------------------------- */ /** * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c) */ #define LWIP_NETCONN 1 /* ------------------------------------ ---------- Socket options ---------- ------------------------------------ */ /** * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c) */ #define LWIP_SOCKET 1 /* ----------------------------------- ---------- DEBUG options ---------- ----------------------------------- */ #define LWIP_DEBUG 0 /* --------------------------------- ---------- OS options ---------- --------------------------------- */ #define TCPIP_THREAD_STACKSIZE 1000 #define TCPIP_MBOX_SIZE 6 #define DEFAULT_UDP_RECVMBOX_SIZE 6 #define DEFAULT_TCP_RECVMBOX_SIZE 6 #define DEFAULT_RAW_RECVMBOX_SIZE 6 #define DEFAULT_ACCEPTMBOX_SIZE 6 #define DEFAULT_THREAD_STACKSIZE 500 #define TCPIP_THREAD_PRIO (configMAX_PRIORITIES - 2) /** LWIP_TIMEVAL_PRIVATE: if you want to use the struct timeval provided * by your system, set this to 0 and include in cc.h */ #if defined(_SYS__TIMEVAL_H_) #define LWIP_TIMEVAL_PRIVATE 0 #endif #endif /* __LWIPOPTS_H__ */ /******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/