/* * wifi_user_set.h * * Created on: 01/04/2017 * Author: pvvx */ #ifndef _WIFI_USER_SET_H_ #define _WIFI_USER_SET_H_ //========================================= //==== Wlan Config ======================== #define DEF_WIFI_MODE RTW_MODE_STA // RTW_MODE_STA_AP, RTW_MODE_AP, RTW_MODE_STA #define DEF_WIFI_AP_STATIONS 3 // Max number of STAs, should be 1..3, default is 3 #define DEF_WIFI_COUNTRY RTW_COUNTRY_RU #define DEF_WIFI_TX_PWR RTW_TX_PWR_PERCENTAGE_100 #define DEF_WIFI_BGN RTW_NETWORK_BGN // rtw_network_mode_t #define DEF_WIFI_ST_SLEEP 0 // 0 - none, 1 - on #define USE_NETBIOS 3 // 0 - off, 1 - ST, 2 - AP, 3 - AP+ST #define DEF_LOAD_CFG ( 0 \ | BID_WIFI_AP_CFG \ | BID_WIFI_ST_CFG \ | BID_AP_DHCP_CFG \ | BID_ST_DHCP_CFG \ )// | BID_WIFI_CFG \ #define DEF_SAVE_CFG ( 0 \ | BID_WIFI_AP_CFG \ | BID_WIFI_ST_CFG \ | BID_AP_DHCP_CFG \ | BID_ST_DHCP_CFG \ | BID_WIFI_CFG \ ) //==== Interface 0 - wlan0 = AP =========== #define DEF_AP_SSID "RTL871X" #define DEF_AP_PASSWORD "0123456789" #define DEF_AP_SECURITY RTW_SECURITY_OPEN #define DEF_AP_BEACON 100 // 100...6000 ms #define DEF_AP_CHANNEL 1 // 1..14 #define DEF_AP_CHANNEL 1 // 1..14 #define DEF_AP_DHCP_MODE 1 // =0 dhcp off, =1 - dhcp on #define DEF_AP_IP IP4ADDR(192,168,4,1) #define DEF_AP_MSK IP4ADDR(255,255,255,0) #define DEF_AP_GW IP4ADDR(192,168,4,1) #define DEF_AP_DHCP_START 2 #define DEF_AP_DHCP_STOP 15 //==== Interface 1 - wlan1 = STA ========== #define DEF_ST_SSID "HOMEAP" #define DEF_ST_PASSWORD "0123456789" #define DEF_ST_SECURITY RTW_SECURITY_WPA_WPA2_MIXED #define DEF_ST_BSSID { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff } // If bssid set is not ff.ff.ff.ff.ff.ff, // station will connect to the router with both ssid[] and bssid[] matched. #define DEF_ST_CHANNEL 1 // 1..14 #define DEF_ST_AUTORECONNECT 3 // 0 - none, 1..254 - count, 255 - all #define DEF_ST_RECONNECT_PAUSE 1 // 1 sec #define DEF_ST_DHCP_MODE 1 // =0 dhcp off, =1 - dhcp on, =2 Static ip, =3 - auto #define DEF_ST_IP IP4ADDR(192,168,1,100) #define DEF_ST_MSK IP4ADDR(255,255,255,0) #define DEF_ST_GW IP4ADDR(192,168,1,1) //==== Interface 2 - eth0 ================= #define DEF_EH_DHCP_MODE 1 // =0 dhcp off, =1 - dhcp on #define DEF_EH_IP IP4ADDR(192,168,7,200) #define DEF_EH_MSK IP4ADDR(255,255,255,0) #define DEF_EH_GW IP4ADDR(192,168,7,1) //========================================= #endif /* _WIFI_USER_SET_H_ */