Change SDK dir name. Use OpenOCD only.

Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com>
2026-07-08 04:15:42 +00:00 · 2017-05-14 18:47:13 +02:00 · 2017-05-14 18:47:13 +02:00 · eeb7f808ae
commit eeb7f808ae
parent 05b731b5f3
1446 changed files with 1 additions and 65 deletions
--- a/sdk/component/soc/realtek/8195a/fwlib/src/Descript.ion
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/Descript.ion
@ -0,0 +1,7 @@
+hal_common.c +
+hal_efuse.c +
+hal_misc.c +
+hal_pinmux.c +
+hal_sdio_host.c +
+hal_soc_ps_monitor.c +
+hal_spi_flash_ram.c +
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_32k.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_32k.c
@ -0,0 +1,305 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "rtl8195a.h"
+
+#ifdef CONFIG_TIMER_MODULE
+
+VOID
+En32KCalibration(
+    VOID
+)
+{
+    u32 Rtemp;
+    u32 Ttemp = 0;
+#if CONFIG_DEBUG_LOG > 5
+    DiagPrintf("32K clock source calibration\n");
+#endif
+    //set parameter
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, 0);
+    //offset 1 = 0x1500
+    Rtemp = 0x811500;
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, Rtemp);
+    HalDelayUs(40);
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, 0);
+
+    //offset 2 = 0x01c0
+    Rtemp = 0x8201c0;
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, Rtemp);
+    HalDelayUs(40);
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, 0);
+    
+    //offset 4 = 0x0100
+    Rtemp = 0x840100;
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, Rtemp);
+    HalDelayUs(40);
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, 0);
+
+    //offset 0 = 0xf980
+    Rtemp = 0x80f980;
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, Rtemp);
+    HalDelayUs(40);
+    HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, 0);
+
+    while(1) {
+        //Polling LOCK
+        Rtemp = 0x110000;
+        HAL_WRITE32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL0, Rtemp);
+        //DiagPrintf("Polling lock\n");
+        HalDelayUs(40);
+
+        Rtemp = HAL_READ32(SYSTEM_CTRL_BASE,REG_OSC32K_REG_CTRL1);
+        if ((Rtemp & 0x3000) != 0x0){
+#if CONFIG_DEBUG_LOG > 5
+            DiagPrintf("32.768 Calibration Success\n", Ttemp);
+#endif
+            break;
+        }
+        else {
+            Ttemp++;
+            HalDelayUs(30);
+#if CONFIG_DEBUG_LOG > 5
+            DiagPrintf("Check lock: %d\n", Ttemp);
+            DiagPrintf("0x278: %x\n", Rtemp);
+#endif
+            if (Ttemp > 100000) { /*Delay 100ms*/            
+                DiagPrintf("32K Calibration Fail!\n", Ttemp);
+                break;
+            }
+        }
+    }
+}
+
+#if CONFIG_WDG
+WDG_ADAPTER          WDGAdapter;
+extern HAL_TIMER_OP HalTimerOp;
+
+#ifdef CONFIG_WDG_NORMAL
+/*
+ * pvvx: if WDT RESET_MODE:
+ * HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN, HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) & 0x1FFFFF);
+ */
+VOID
+WDGInitial(
+    IN  u32 Period
+)
+{
+    u8 CountId;
+    u16 DivFactor;
+    u32 CountTemp; 
+    u32 CountProcess = 0;
+    u32 DivFacProcess = 0;
+    u32 PeriodProcess = 100*Period;
+    u32 MinPeriodTemp = 0xFFFFFFFF;
+    u32 PeriodTemp = 0;
+    u32 *Reg = (u32*)&(WDGAdapter.Ctrl);
+    
+#if CONFIG_DEBUG_LOG > 1
+    DBG_8195A("WdgPeriod = %d ms\n", Period);
+#endif
+    for (CountId = 0; CountId < 12; CountId++) {
+        CountTemp = ((0x00000001 << (CountId+1))-1);
+        DivFactor = (u16)((PeriodProcess)/(CountTemp*3));
+        
+        if (DivFactor > 0) {
+            PeriodTemp = 3*(DivFactor+1)*CountTemp;
+            if (PeriodProcess < PeriodTemp) {
+                if (MinPeriodTemp > PeriodTemp) {
+                    MinPeriodTemp = PeriodTemp;
+                    CountProcess = CountId;
+                    DivFacProcess = DivFactor;
+                }
+            }
+        }
+    }
+
+#if CONFIG_DEBUG_LOG > 4
+    DBG_8195A("WdgScalar = %p\n", DivFacProcess);
+    DBG_8195A("WdgCunLimit = %p\n", CountProcess);
+#endif
+    WDGAdapter.Ctrl.WdgScalar   = DivFacProcess;
+    WDGAdapter.Ctrl.WdgEnByte   = 0;
+    WDGAdapter.Ctrl.WdgClear    = 1;
+    WDGAdapter.Ctrl.WdgCunLimit = CountProcess;
+    WDGAdapter.Ctrl.WdgMode     = RESET_MODE;
+    WDGAdapter.Ctrl.WdgToISR    = 0;
+#if CONFIG_DEBUG_LOG > 4
+    DBG_8195A("WdgCtrl = %p\n", (u32)(*Reg));
+#endif
+    HAL_WRITE32(VENDOR_REG_BASE, 0, (*Reg));
+}
+
+VOID
+WDGIrqHandle
+(
+    IN  VOID        *Data
+)
+{
+    u32 temp;
+    WDG_REG *CtrlReg;
+
+    if (NULL != WDGAdapter.UserCallback) {
+        WDGAdapter.UserCallback(WDGAdapter.callback_id);
+    }
+
+    // Clear ISR
+    temp = HAL_READ32(VENDOR_REG_BASE, 0);
+    CtrlReg = (WDG_REG*)&temp;
+    CtrlReg->WdgToISR    = 1;    // write 1 clear
+    HAL_WRITE32(VENDOR_REG_BASE, 0, (temp));
+}
+
+VOID
+WDGIrqInitial(
+    VOID
+)
+{
+    u32 *Temp = (u32*)&(WDGAdapter.Ctrl);
+    
+    WDGAdapter.IrqHandle.Data = (u32)&WDGAdapter;
+    WDGAdapter.IrqHandle.IrqFun = (IRQ_FUN)WDGIrqHandle;
+    WDGAdapter.IrqHandle.IrqNum = WDG_IRQ;
+    WDGAdapter.IrqHandle.Priority = 0;
+         
+    InterruptRegister(&(WDGAdapter.IrqHandle));
+    InterruptEn(&(WDGAdapter.IrqHandle));
+
+
+    WDGAdapter.Ctrl.WdgToISR    = 1;    // clear ISR first
+    WDGAdapter.Ctrl.WdgMode     = INT_MODE;
+    HAL_WRITE32(VENDOR_REG_BASE, 0, ((*Temp)));
+    WDGAdapter.Ctrl.WdgToISR    = 0;
+}
+
+VOID
+WDGStart(
+    VOID
+)
+{
+    u32 *Temp = (u32*)&(WDGAdapter.Ctrl);
+    WDGAdapter.Ctrl.WdgEnByte    = 0xA5;
+    HAL_WRITE32(VENDOR_REG_BASE, 0, ((*Temp)));
+}
+
+VOID
+WDGStop(
+    VOID
+)
+{
+    u32 *Temp = (u32*)&(WDGAdapter.Ctrl);
+    WDGAdapter.Ctrl.WdgEnByte    = 0;
+    HAL_WRITE32(VENDOR_REG_BASE, 0, ((*Temp)));
+}
+
+VOID
+WDGRefresh(
+    VOID
+)
+{
+    u32 *Temp = (u32*)&(WDGAdapter.Ctrl);
+    WDGAdapter.Ctrl.WdgClear    = 1;
+    HAL_WRITE32(VENDOR_REG_BASE, 0, ((*Temp)));
+} 
+
+VOID
+WDGIrqCallBackReg(
+    IN VOID *CallBack,
+    IN u32   Id
+)
+{
+    WDGAdapter.UserCallback = (VOID (*)(u32))CallBack;
+    WDGAdapter.callback_id = Id;
+} 
+
+#endif
+
+#ifdef CONFIG_WDG_TEST
+VOID
+WDGIrqHandle
+(
+    IN  VOID        *Data
+)
+{
+}
+
+
+VOID
+WDGGtimerHandle
+(
+    IN  VOID        *Data
+)
+{
+    u32 *Temp = (u32*)&(WDGAdapter.Ctrl);
+    WDGAdapter.Ctrl.WdgClear    = 1;
+    DBG_8195A("reset WDG\n");
+    if (HAL_READ32(SYSTEM_CTRL_BASE,REG_SYS_DSTBY_INFO2) == 0) {
+        HAL_WRITE32(VENDOR_REG_BASE, 0, ((*Temp)));
+    }
+}
+
+
+VOID
+InitWDGIRQ(VOID)
+{
+    u32 *Temp = (u32*)&(WDGAdapter.Ctrl);
+    
+    WDGAdapter.Ctrl.WdgScalar   = 0x96;
+    WDGAdapter.Ctrl.WdgEnByte   = 0xA5;
+    WDGAdapter.Ctrl.WdgClear    = 1;
+    WDGAdapter.Ctrl.WdgCunLimit = CNTFFFH;
+    WDGAdapter.Ctrl.WdgMode     = RESET_MODE;
+    WDGAdapter.Ctrl.WdgToISR    = 0;
+
+    if (WDGAdapter.Ctrl.WdgMode == INT_MODE) {
+        
+        WDGAdapter.IrqHandle.Data = NULL;
+        WDGAdapter.IrqHandle.IrqFun = (IRQ_FUN)WDGIrqHandle;
+        WDGAdapter.IrqHandle.IrqNum = WDG_IRQ;
+        WDGAdapter.IrqHandle.Priority = 5;
+             
+        InterruptRegister(&(WDGAdapter.IrqHandle));
+        InterruptEn(&(WDGAdapter.IrqHandle));
+    }
+    else {
+        
+        WDGAdapter.WdgGTimer.TimerIrqPriority   = 0;
+        WDGAdapter.WdgGTimer.TimerMode          = USER_DEFINED;
+        WDGAdapter.WdgGTimer.IrqDis             = OFF;
+        WDGAdapter.WdgGTimer.TimerId            = 2;//
+        WDGAdapter.WdgGTimer.IrqHandle.IrqFun   = (IRQ_FUN)WDGGtimerHandle;
+        WDGAdapter.WdgGTimer.IrqHandle.IrqNum   = TIMER2_7_IRQ;
+        WDGAdapter.WdgGTimer.IrqHandle.Priority = 5;
+        WDGAdapter.WdgGTimer.IrqHandle.Data     = NULL;
+        
+        if ((WDGAdapter.Ctrl.WdgCunLimit == CNTFFFH)&&(WDGAdapter.Ctrl.WdgScalar >= 0x8429)){
+            WDGAdapter.WdgGTimer.TimerLoadValueUs = 0xFFFFFFFF - WDGTIMERELY;
+        }
+        else {
+            WDGAdapter.WdgGTimer.TimerLoadValueUs   = (BIT0 << (WDGAdapter.Ctrl.WdgCunLimit+1))
+                *WDGAdapter.Ctrl.WdgScalar*TIMER_TICK_US - WDGTIMERELY;
+        }
+
+        HalTimerOp.HalTimerInit((VOID*) &(WDGAdapter.WdgGTimer));
+    }
+    //fill reg
+    HAL_WRITE32(VENDOR_REG_BASE, 0, ((*Temp)));
+}
+
+
+//WDG
+VOID HalWdgInit(
+    VOID
+)
+{
+        
+}
+#endif  //CONFIG_WDG_TEST
+#endif  //CONFIG_WDG
+#endif  //#ifdef CONFIG_TIMER_MODULE
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_adc.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_adc.c
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_common.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_common.c
@ -0,0 +1,23 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#include "rtl8195a.h"
+#include "hal_common.h"
+
+extern HAL_TIMER_OP        HalTimerOp;
+
+HAL_Status 
+HalCommonInit(void){
+
+#ifdef CONFIG_TIMER_MODULE
+    HalTimerOpInit_Patch((VOID*)(&HalTimerOp));
+#endif
+
+    return HAL_OK;
+}
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_dac.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_dac.c
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_efuse.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_efuse.c
@ -0,0 +1,337 @@
+/*
+* Disassemble hal_efuse.o pvvx 10.2016
+*/
+#include "rtl8195a.h"
+#ifdef CONFIG_EFUSE_EN
+#include "hal_efuse.h"
+
+//#define	NO_ROM_API
+
+#define EFUSE_WRITE_ENABLE 0
+
+#define EFUSE_SECTION_SIZE (1<<7) // 128 bytes
+#define EFUSE_BUF_MAX_LEN (1<<5) // 32 bytes
+#define OTP_START_ADDR EFUSE_SECTION_SIZE
+#define OTP_BUF_MAX_LEN (1<<5) // 32 bytes
+#define	EFUSE_SECTION_CODE 11
+
+#ifdef NO_ROM_API
+//====================================================== Start libs ROM efuse
+//----- HalEFUSEPowerSwitch8195AROM addr 0x6561
+_LONG_CALL_ROM_ int HalEFUSEPowerSwitch8195AROM(IN unsigned char bWrite, IN unsigned char PwrState, IN unsigned char L25OutVoltage) {
+	  if (PwrState == 1) {
+		  HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_EEPROM_CTRL0, (HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EEPROM_CTRL0) & 0xFFFFFF) | 0x69000000); // EFUSE_UNLOCK
+		  if (!(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_FUNC_EN) & BIT_SYS_FEN_EELDR))	// REG_SYS_FUNC_EN BIT_SYS_FEN_EELDR ?
+			  HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_FUNC_EN, HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_FUNC_EN) | BIT_SYS_FEN_EELDR);
+		  if (!(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_CLK_CTRL0) & BIT_SYSON_CK_EELDR_EN))	// REG_SYS_CLK_CTRL0 BIT_SYSON_CK_EELDR_EN ?
+			  HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_CLK_CTRL0, HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_CLK_CTRL0) | BIT_SYSON_CK_EELDR_EN);
+		  if (!(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_CLK_CTRL1) & BIT_PESOC_EELDR_CK_SEL)) // REG_SYS_CLK_CTRL1 BIT_PESOC_EELDR_CK_SEL ?
+			  HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_CLK_CTRL1, HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_CLK_CTRL1) | BIT_PESOC_EELDR_CK_SEL);
+		  if (bWrite == 1)
+			  HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_REGU_CTRL0, (HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_REGU_CTRL0) & 0xFFFFF0FF) | BIT_SYS_REGU_LDO25E_EN | BIT_SYS_REGU_LDO25E_ADJ(L25OutVoltage));
+	  }
+	  else
+	  {
+		  HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_EEPROM_CTRL0, HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EEPROM_CTRL0) & 0xFFFFFF); // EFUSE_UNLOCK
+		  if ( bWrite == 1 )
+			  HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_REGU_CTRL0, (HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_REGU_CTRL0) & (~BIT_SYS_REGU_LDO25E_EN)));
+	  }
+	  return bWrite;
+}
+
+//----- HALEFUSEOneByteReadROM addr 0x6561
+_LONG_CALL_ROM_ int HALEFUSEOneByteReadROM(IN unsigned int CtrlSetting, IN unsigned short Addr, OUT unsigned char *Data, IN unsigned char L25OutVoltage)
+{
+int i = 0, result = 0;
+	if ( (Addr <= 0xFF) || ((CtrlSetting & 0xFFFF) == 0x26AE) ) {
+		HalEFUSEPowerSwitch8195AROM(1, 1, L25OutVoltage);
+
+		HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_TEST, HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_TEST) & (~BIT_SYS_EF_FORCE_PGMEN));
+		HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL,
+				(CtrlSetting & (~(BIT_SYS_EF_RWFLAG | (BIT_MASK_SYS_EF_ADDR << BIT_SHIFT_SYS_EF_ADDR)	| (BIT_MASK_SYS_EF_DATA << BIT_SHIFT_SYS_EF_DATA))))
+				| BIT_SYS_EF_ADDR(Addr));
+		while(1) {
+			if(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL) & BIT_SYS_EF_RWFLAG) {
+				*Data = HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL);
+				result = 1;
+				break;
+			}
+			HalDelayUs(1000);
+			if (i++ >= 100) {
+				*Data = -1;
+				break;
+			};
+		};
+		HalEFUSEPowerSwitch8195AROM(1, 0, L25OutVoltage);
+	}
+	else *Data = -1;
+	return result;
+}
+
+//----- HALEFUSEOneByteWriteROM addr 0x6699
+_LONG_CALL_ROM_ int HALEFUSEOneByteWriteROM(IN unsigned int CtrlSetting, IN unsigned short Addr, IN unsigned char Data, IN unsigned char L25OutVoltage)
+{
+int i = 0, result = 0;
+	if ( (Addr <= 0xFF) || ((CtrlSetting & 0xFFFF) == 0x26AE) ) {
+		HalEFUSEPowerSwitch8195AROM(1, 1, L25OutVoltage);
+		HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_TEST, HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_TEST) | BIT_SYS_EF_FORCE_PGMEN);
+		HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL, Data | BIT_SYS_EF_RWFLAG | BIT_SYS_EF_ADDR(Addr) | BIT_SYS_EF_DATA(Data) |
+				(CtrlSetting & (~(BIT_SYS_EF_RWFLAG | (BIT_MASK_SYS_EF_ADDR << BIT_SHIFT_SYS_EF_ADDR) | (BIT_MASK_SYS_EF_DATA << BIT_SHIFT_SYS_EF_DATA)))));
+		while(1) {
+			HalDelayUs(1000);
+			if(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL) & BIT_SYS_EF_RWFLAG) break;
+			if (i++ >= 100) {
+				result = 1;
+				break;
+			};
+		};
+		HalEFUSEPowerSwitch8195AROM(1, 0, L25OutVoltage);
+	}
+	return result;
+}
+//====================================================== End libs ROM efuse
+#endif
+
+//----- HALOTPOneByteReadRAM
+int HALOTPOneByteReadRAM(IN unsigned int CtrlSetting, IN unsigned short Addr, OUT  unsigned char *Data, IN unsigned char L25OutVoltage)
+{
+	int result;
+	  if ( (unsigned int)(Addr - EFUSE_SECTION_SIZE) > OTP_BUF_MAX_LEN - 1 )
+	    result = 1;
+	  else
+	    result = HALEFUSEOneByteReadROM(CtrlSetting, Addr, Data, L25OutVoltage);
+	return result;
+}
+
+//----- HALOTPOneByteWriteRAM
+int HALOTPOneByteWriteRAM(IN unsigned int CtrlSetting, IN unsigned short Addr, IN unsigned char Data, IN unsigned char L25OutVoltage)
+{
+#if EFUSE_WRITE_ENABLE
+	int result;
+	  if ( (unsigned int)(Addr - EFUSE_SECTION_SIZE) > OTP_BUF_MAX_LEN - 1 )
+	    result = 1;
+	  else
+	    result = HALEFUSEOneByteWriteROM(CtrlSetting, Addr, Data, L25OutVoltage);
+	return result;
+#else
+  return 1;
+#endif
+}
+
+//----- HALEFUSEOneByteReadRAM
+int HALEFUSEOneByteReadRAM(IN unsigned int CtrlSetting, IN unsigned short Addr, IN unsigned char *Data, IN unsigned char L25OutVoltage)
+{
+	int result;
+
+	if ( (unsigned int)(Addr - 160) > 0x33 )
+	{
+		result = HALEFUSEOneByteReadROM(CtrlSetting, Addr, Data, L25OutVoltage);
+	}
+	else
+	{
+		*Data = -1;
+		result = 1;
+	}
+	return result;
+}
+
+//----- HALEFUSEOneByteWriteRAM
+int HALEFUSEOneByteWriteRAM(IN unsigned int CtrlSetting, IN unsigned short Addr, IN unsigned char Data, IN unsigned char L25OutVoltage)
+{
+#if EFUSE_WRITE_ENABLE
+	int result;
+	if ( (unsigned int)(Addr - 127) <= 0x54 )
+	    result = 1;
+	else {
+		result = HALEFUSEOneByteWriteROM(CtrlSetting, Addr, Data, L25OutVoltage);
+	}
+	return result;
+#else
+  return 1;
+#endif
+}
+
+//----- ReadEfuseContant
+void ReadEfuseContant(IN unsigned char UserCode, IN unsigned char *pContant)
+{
+  unsigned int i, offset, bcnt, eFuse_Addr = 0;
+  unsigned char DataTemp0;
+  unsigned char DataTemp1;
+  unsigned char * pbuf = pContant;
+
+  do {
+    HALEFUSEOneByteReadRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), eFuse_Addr, &DataTemp0, L25EOUTVOLTAGE);
+    if (DataTemp0 == 0x0FF)  break;
+    if ((DataTemp0 & 0x0F) == 0x0F) {
+      HALEFUSEOneByteReadRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), ++eFuse_Addr, &DataTemp1, L25EOUTVOLTAGE);
+      offset = ((DataTemp1 & 0x0F0) | (DataTemp0 >> 4)) >> 1;
+      bcnt = (~DataTemp1) & 0x0F;
+      if (((UserCode + EFUSE_SECTION_CODE) << 2) > offset || offset >= ((UserCode + EFUSE_SECTION_CODE + 1) << 2))  {
+        while(bcnt) {
+          if (bcnt & 1) eFuse_Addr += 2;
+          bcnt >>= 1;
+        }
+      }
+      else {
+        int base = (offset - ((EFUSE_SECTION_CODE + UserCode) << 2)) << 3;
+        i = 0;
+        while(bcnt) {
+          if (bcnt & 1) {
+            HALEFUSEOneByteReadRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), ++eFuse_Addr, &pbuf[base + i], L25EOUTVOLTAGE);
+            HALEFUSEOneByteReadRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), ++eFuse_Addr, &pbuf[base + i + 1], L25EOUTVOLTAGE);
+          }
+          bcnt >>= 1;
+          i += 2;
+        }
+      }
+    }
+    else for(i = (~DataTemp0) & 0x0F; i; i >>= 1) if (i & 1) eFuse_Addr += 2;
+    eFuse_Addr++;
+  }
+  while(eFuse_Addr < EFUSE_SECTION_SIZE - 1);
+}
+
+//----- ReadEfuseContant1
+void ReadEfuseContant1(OUT unsigned char *pContant)
+{
+	ReadEfuseContant(0, pContant);
+}
+
+//----- ReadEfuseContant2
+void ReadEfuseContant2(OUT unsigned char *pContant)
+{
+	ReadEfuseContant(1, pContant);
+}
+
+//----- ReadEfuseContant3
+void ReadEfuseContant3(OUT unsigned char *pContant)
+{
+	ReadEfuseContant(2, pContant);
+}
+
+//----- GetRemainingEfuseLength
+int GetRemainingEfuseLength(void)
+{
+  unsigned int i, eFuse_Addr = 0;
+  unsigned char DataTemp0;
+  do
+  {
+	  HALEFUSEOneByteReadRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), eFuse_Addr, &DataTemp0, L25EOUTVOLTAGE);
+	  if(DataTemp0 == 0x0FF)  break;
+	  if((DataTemp0 & 0x0F) == 0x0F)
+		  HALEFUSEOneByteReadRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), ++eFuse_Addr, &DataTemp0, L25EOUTVOLTAGE);
+	  for (i = (~DataTemp0) & 0x0F; i; i >>= 1 ) if (i & 1) eFuse_Addr += 2;
+	  eFuse_Addr++;
+  }
+  while(eFuse_Addr < EFUSE_SECTION_SIZE - 1);
+  return (EFUSE_SECTION_SIZE - 1 - eFuse_Addr);
+}
+
+//----- WriteEfuseContant
+int WriteEfuseContant(IN unsigned char UserCode, IN unsigned char CodeWordNum, IN unsigned char WordEnable, IN unsigned char *pContant)
+{
+#if EFUSE_WRITE_ENABLE
+  int result = 0;
+  unsigned int i, j, eFuse_Addr; // r4@3
+  unsigned char DataTemp0; 
+  unsigned int bmask = WordEnable & 0xF;
+  
+  if (bmask) {
+	  eFuse_Addr = 0;
+	  do { // eFuse_Addr = 128 - _GetRemainingEfuseLength
+		    HALEFUSEOneByteReadRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), eFuse_Addr, &DataTemp0, L25EOUTVOLTAGE);
+		  if (DataTemp0 == 0x0ff) break;
+		  if ((DataTemp0 & 0x0F) == 0x0F) 
+			 HALEFUSEOneByteReadRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), ++eFuse_Addr, &DataTemp0, L25EOUTVOLTAGE);
+		  for (i = (~DataTemp0) & 0x0F; i; i >>= 1) if (i & 1) eFuse_Addr += 2;
+		  eFuse_Addr++;
+	  }
+	  while (eFuse_Addr <= EFUSE_SECTION_SIZE - 2);
+	  
+	  j = 0;
+	  do
+	  {
+	    if (bmask & 1) j += 2;
+	    bmask >>= 1;
+	  }
+	  while (bmask);
+	  if ((eFuse_Addr + j) <= EFUSE_SECTION_SIZE - 4)
+	  {
+	    HALEFUSEOneByteWriteRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), eFuse_Addr, (((UserCode + EFUSE_SECTION_CODE) << 7) | 0x0F) + ((CodeWordNum & 3) << 5), L25EOUTVOLTAGE);
+	    HALEFUSEOneByteWriteRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), eFuse_Addr + 1, (((UserCode + EFUSE_SECTION_CODE) << 3) & 0xF0) | ((~bmask) & 0xF), L25EOUTVOLTAGE);
+	    i = 0;
+	    while (i < j)
+	    {
+	      HALEFUSEOneByteWriteRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), eFuse_Addr + 2 + i, pContant[i], L25EOUTVOLTAGE);
+	      i++;
+	    }
+	    result = 1;
+	  }
+  }
+  return result;
+#else  
+  return 1;
+#endif
+}
+
+//----- WriteEfuseContant1
+int WriteEfuseContant1(IN unsigned char CodeWordNum, IN unsigned char WordEnable, IN unsigned char *pContant)
+{
+#if EFUSE_WRITE_ENABLE
+  return WriteEfuseContant(0, CodeWordNum, WordEnable, pContant);
+#else  
+  return 1;
+#endif
+}
+
+//----- WriteEfuseContant2
+int WriteEfuseContant2(IN unsigned char CodeWordNum, IN unsigned char WordEnable, IN unsigned char *pContant)
+{
+#if EFUSE_WRITE_ENABLE
+  return WriteEfuseContant(1, CodeWordNum, WordEnable, pContant);
+#else  
+  return 1;
+#endif
+}
+
+//----- WriteEfuseContant2
+int WriteEfuseContant3(IN unsigned char CodeWordNum, IN unsigned char WordEnable, IN unsigned char *pContant)
+{
+#if EFUSE_WRITE_ENABLE
+  return WriteEfuseContant(2, CodeWordNum, WordEnable, pContant);
+#else  
+  return 1;
+#endif
+}
+
+//----- ReadEOTPContant
+void ReadEOTPContant(IN unsigned char *pContant)
+{
+	int i;
+	for(i = 0; i < OTP_BUF_MAX_LEN; i++ )
+	    HALOTPOneByteReadRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), i+EFUSE_SECTION_SIZE, &pContant[i], L25EOUTVOLTAGE);
+}
+
+//----- WriteEOTPContant
+void WriteEOTPContant(IN unsigned char *pContant)
+{
+#if EFUSE_WRITE_ENABLE
+	int i;
+	unsigned char DataTemp0;
+	for(i = 0; i < OTP_BUF_MAX_LEN; i++ ) {
+		HALOTPOneByteReadRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), i+EFUSE_SECTION_SIZE, &DataTemp0, L25EOUTVOLTAGE);
+		if (DataTemp0 == 0xFF)
+			HALOTPOneByteWriteRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), i+EFUSE_SECTION_SIZE, pContant[i], L25EOUTVOLTAGE);
+	}
+#endif	
+}
+
+//----- HALJtagOff
+void HALJtagOff(void)
+{
+#if EFUSE_WRITE_ENABLE
+	HALEFUSEOneByteWriteROM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), 211, 0xFE, L25EOUTVOLTAGE);
+#endif	
+}
+
+#endif //CONFIG_EFUSE_EN
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_gdma.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_gdma.c
@ -0,0 +1,578 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "rtl8195a.h"
+#include "hal_gdma.h"
+
+#ifdef CONFIG_GDMA_EN
+
+#define MAX_GDMA_INDX       1
+#define MAX_GDMA_CHNL       6
+
+static u8 HalGdmaReg[MAX_GDMA_INDX+1];
+
+const HAL_GDMA_CHNL GDMA_Chnl_Option[] = { 
+        {0,0,GDMA0_CHANNEL0_IRQ,0},
+        {1,0,GDMA1_CHANNEL0_IRQ,0},
+        {0,1,GDMA0_CHANNEL1_IRQ,0},
+        {1,1,GDMA1_CHANNEL1_IRQ,0},
+        {0,2,GDMA0_CHANNEL2_IRQ,0},
+        {1,2,GDMA1_CHANNEL2_IRQ,0},
+        {0,3,GDMA0_CHANNEL3_IRQ,0},
+        {1,3,GDMA1_CHANNEL3_IRQ,0},
+        {0,4,GDMA0_CHANNEL4_IRQ,0},
+        {1,4,GDMA1_CHANNEL4_IRQ,0},
+        {0,5,GDMA0_CHANNEL5_IRQ,0},
+        {1,5,GDMA1_CHANNEL5_IRQ,0},
+        
+        {0xff,0,0,0}    // end
+};
+
+const HAL_GDMA_CHNL GDMA_Multi_Block_Chnl_Option[] = { 
+        {0,4,GDMA0_CHANNEL4_IRQ,0},
+        {1,4,GDMA1_CHANNEL4_IRQ,0},
+        {0,5,GDMA0_CHANNEL5_IRQ,0},
+        {1,5,GDMA1_CHANNEL5_IRQ,0},
+        
+        {0xff,0,0,0}    // end
+};
+
+
+const u16 HalGdmaChnlEn[6] = {
+    GdmaCh0, GdmaCh1, GdmaCh2, GdmaCh3,
+    GdmaCh4, GdmaCh5
+};
+
+
+    
+VOID HalGdmaOpInit(
+    IN  VOID *Data
+)
+{
+    PHAL_GDMA_OP pHalGdmaOp = (PHAL_GDMA_OP) Data;
+
+    pHalGdmaOp->HalGdmaOnOff = HalGdmaOnOffRtl8195a;
+    pHalGdmaOp->HalGdamChInit = HalGdamChInitRtl8195a;
+    pHalGdmaOp->HalGdmaChDis = HalGdmaChDisRtl8195a;
+    pHalGdmaOp->HalGdmaChEn = HalGdmaChEnRtl8195a;
+    pHalGdmaOp->HalGdmaChSeting = HalGdmaChSetingRtl8195a;
+#ifndef CONFIG_CHIP_E_CUT
+    pHalGdmaOp->HalGdmaChBlockSeting = HalGdmaChBlockSetingRtl8195a_Patch;
+#else
+    pHalGdmaOp->HalGdmaChBlockSeting = HalGdmaChBlockSetingRtl8195a_V04;
+#endif
+    pHalGdmaOp->HalGdmaChIsrEnAndDis = HalGdmaChIsrEnAndDisRtl8195a;
+    pHalGdmaOp->HalGdmaChIsrClean = HalGdmaChIsrCleanRtl8195a;
+    pHalGdmaOp->HalGdmaChCleanAutoSrc = HalGdmaChCleanAutoSrcRtl8195a;
+    pHalGdmaOp->HalGdmaChCleanAutoDst = HalGdmaChCleanAutoDstRtl8195a;
+}
+
+VOID HalGdmaOn(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    pHalGdmaAdapter->GdmaOnOff = ON;
+    HalGdmaOnOffRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+VOID HalGdmaOff(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    pHalGdmaAdapter->GdmaOnOff = OFF;
+    HalGdmaOnOffRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+BOOL HalGdmaChInit(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    return (HalGdamChInitRtl8195a((VOID*)pHalGdmaAdapter));
+}
+
+VOID HalGdmaChDis(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    HalGdmaChDisRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+VOID HalGdmaChEn(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    HalGdmaChEnRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+BOOL HalGdmaChSeting(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    return (HalGdmaChSetingRtl8195a((VOID*)pHalGdmaAdapter));
+}
+
+BOOL HalGdmaChBlockSeting(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+#ifndef CONFIG_CHIP_E_CUT
+    return (HalGdmaChBlockSetingRtl8195a_Patch((VOID*)pHalGdmaAdapter));
+#else
+    return (HalGdmaChBlockSetingRtl8195a_V04((VOID*)pHalGdmaAdapter));
+#endif
+}
+
+VOID HalGdmaChIsrEn(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    pHalGdmaAdapter->IsrCtrl = ENABLE;
+    HalGdmaChIsrEnAndDisRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+VOID HalGdmaChIsrDis(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    pHalGdmaAdapter->IsrCtrl = DISABLE;
+    HalGdmaChIsrEnAndDisRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+u8 HalGdmaChIsrClean(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    return (HalGdmaChIsrCleanRtl8195a((VOID*)pHalGdmaAdapter));
+}
+
+VOID HalGdmaChCleanAutoSrc(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    HalGdmaChCleanAutoSrcRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+VOID HalGdmaChCleanAutoDst(PHAL_GDMA_ADAPTER pHalGdmaAdapter)
+{
+    HalGdmaChCleanAutoDstRtl8195a((VOID*)pHalGdmaAdapter);
+}
+
+HAL_Status HalGdmaChnlRegister (u8 GdmaIdx, u8 ChnlNum)
+{
+    u32 mask;
+
+    if ((GdmaIdx > MAX_GDMA_INDX) || (ChnlNum > MAX_GDMA_CHNL)) {
+        // Invalid GDMA Index or Channel Number
+        return HAL_ERR_PARA;
+    }
+
+    mask = 1 << ChnlNum;
+
+    if ((HalGdmaReg[GdmaIdx] & mask) != 0) {
+        return HAL_BUSY;
+    }
+    else {
+#if 1
+        if (HalGdmaReg[GdmaIdx] == 0) {
+            if (GdmaIdx == 0) {
+                ACTCK_GDMA0_CCTRL(ON);
+                GDMA0_FCTRL(ON);
+            }
+            else {
+                ACTCK_GDMA1_CCTRL(ON);
+                GDMA1_FCTRL(ON);
+            }
+        }
+#endif    
+        HalGdmaReg[GdmaIdx] |= mask;
+        return HAL_OK;
+    }
+}
+
+VOID HalGdmaChnlUnRegister (u8 GdmaIdx, u8 ChnlNum)
+{
+    u32 mask;
+
+    if ((GdmaIdx > MAX_GDMA_INDX) || (ChnlNum > MAX_GDMA_CHNL)) {
+        // Invalid GDMA Index or Channel Number
+        return;
+    }
+    
+    mask = 1 << ChnlNum;
+
+    HalGdmaReg[GdmaIdx] &= ~mask;
+#if 1
+    if (HalGdmaReg[GdmaIdx] == 0) {
+        if (GdmaIdx == 0) {
+            ACTCK_GDMA0_CCTRL(OFF);
+            GDMA0_FCTRL(OFF);
+        }
+        else {
+            ACTCK_GDMA1_CCTRL(OFF);
+            GDMA1_FCTRL(OFF);
+        }
+    }
+#endif    
+}
+
+PHAL_GDMA_CHNL HalGdmaChnlAlloc (HAL_GDMA_CHNL *pChnlOption)
+{
+    HAL_GDMA_CHNL *pgdma_chnl;
+
+    pgdma_chnl = pChnlOption;
+    if (pChnlOption == NULL) {
+        // Use default GDMA Channel Option table
+        pgdma_chnl = (HAL_GDMA_CHNL*)&GDMA_Chnl_Option[0];
+    }
+    else{
+        pgdma_chnl = (HAL_GDMA_CHNL*) pgdma_chnl;
+    }
+
+    while (pgdma_chnl->GdmaIndx <= MAX_GDMA_INDX) {
+        if (HalGdmaChnlRegister(pgdma_chnl->GdmaIndx, pgdma_chnl->GdmaChnl) == HAL_OK) {
+            // This GDMA Channel is available
+            break;
+        }
+        pgdma_chnl += 1;
+    }
+
+    if (pgdma_chnl->GdmaIndx > MAX_GDMA_INDX) {
+        pgdma_chnl = NULL;
+    }
+    
+    return pgdma_chnl;
+}
+
+VOID HalGdmaChnlFree (HAL_GDMA_CHNL *pChnl)
+{
+    IRQ_HANDLE IrqHandle;
+
+    IrqHandle.IrqNum = pChnl->IrqNum;
+    InterruptDis(&IrqHandle);
+    InterruptUnRegister(&IrqHandle);
+    HalGdmaChnlUnRegister(pChnl->GdmaIndx, pChnl->GdmaChnl);
+}
+
+VOID HalGdmaMemIrqHandler(VOID *pData)
+{
+    PHAL_GDMA_OBJ pHalGdmaObj=(PHAL_GDMA_OBJ)pData;
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PIRQ_HANDLE pGdmaIrqHandle;
+    
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+    pGdmaIrqHandle = &(pHalGdmaObj->GdmaIrqHandle);
+    // Clean Auto Reload Bit
+    HalGdmaChCleanAutoDst((VOID*)pHalGdmaAdapter);
+
+    // Clear Pending ISR
+    HalGdmaChIsrClean((VOID*)pHalGdmaAdapter);
+
+    HalGdmaChDis((VOID*)(pHalGdmaAdapter));
+    pHalGdmaObj->Busy = 0;
+
+    if (pGdmaIrqHandle->IrqFun != NULL) {
+        pGdmaIrqHandle->IrqFun((VOID*)pGdmaIrqHandle->Data);
+    }
+}
+
+BOOL HalGdmaMemCpyAggrInit(PHAL_GDMA_OBJ pHalGdmaObj)
+{
+    HAL_GDMA_CHNL *pgdma_chnl;
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PIRQ_HANDLE pGdmaIrqHandle;
+    IRQ_HANDLE IrqHandle;
+
+    pgdma_chnl = HalGdmaChnlAlloc((PHAL_GDMA_CHNL) &GDMA_Multi_Block_Chnl_Option[0]);    // get a whatever GDMA channel
+    if (NULL == pgdma_chnl) {        
+        DBG_GDMA_ERR("%s: Cannot allocate a GDMA Channel\n", __FUNCTION__);
+        return _FALSE;
+    }
+
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+    pGdmaIrqHandle = &(pHalGdmaObj->GdmaIrqHandle);
+    
+    DBG_GDMA_INFO("%s: Use GDMA%d CH%d\n", __FUNCTION__, pgdma_chnl->GdmaIndx, pgdma_chnl->GdmaChnl);
+
+    _memset((void *)pHalGdmaAdapter, 0, sizeof(HAL_GDMA_ADAPTER));
+
+    pHalGdmaAdapter->GdmaCtl.TtFc = TTFCMemToMem;
+    pHalGdmaAdapter->GdmaCtl.Done = 1;
+    pHalGdmaAdapter->MuliBlockCunt = 0;
+    pHalGdmaAdapter->MaxMuliBlock = 1;
+    pHalGdmaAdapter->ChNum = pgdma_chnl->GdmaChnl;
+    pHalGdmaAdapter->GdmaIndex = pgdma_chnl->GdmaIndx;
+    pHalGdmaAdapter->ChEn = 0x0101 << pgdma_chnl->GdmaChnl;
+    pHalGdmaAdapter->GdmaIsrType = (TransferType|ErrType);
+    pHalGdmaAdapter->IsrCtrl = ENABLE;
+    pHalGdmaAdapter->GdmaOnOff = ON;
+    pHalGdmaAdapter->GdmaCtl.IntEn      = 1;
+    pHalGdmaAdapter->Rsvd4to7 = 1;
+    pHalGdmaAdapter->Llpctrl = 1;
+    pGdmaIrqHandle->IrqNum = pgdma_chnl->IrqNum;
+    pGdmaIrqHandle->Priority = 10;
+
+    IrqHandle.IrqFun = (IRQ_FUN) HalGdmaMemIrqHandler;
+    IrqHandle.Data = (u32) pHalGdmaObj;
+    IrqHandle.IrqNum = pGdmaIrqHandle->IrqNum;
+    IrqHandle.Priority = pGdmaIrqHandle->Priority;
+
+    InterruptRegister(&IrqHandle);
+    InterruptEn(&IrqHandle);
+    pHalGdmaObj->Busy = 0;
+    
+    return _TRUE;
+}
+
+
+VOID HalGdmaMultiBlockSetting(PHAL_GDMA_OBJ pHalGdmaObj, PHAL_GDMA_BLOCK pHalGdmaBlock)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    u8 BlockNumber;
+    u8 BlockIndex;
+    u8 FourBytesAlign;
+
+    BlockNumber = pHalGdmaObj->BlockNum;
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+
+    pHalGdmaAdapter->GdmaCtl.LlpSrcEn = 1;
+    pHalGdmaAdapter->GdmaCtl.LlpDstEn = 1;
+
+    if(((pHalGdmaBlock[0].SrcAddr & 0x03) == 0) &&((pHalGdmaBlock[0].DstAddr & 0x03) == 0) 
+        && ((pHalGdmaBlock[0].BlockLength & 0X03) == 0)){   
+        pHalGdmaAdapter->GdmaCtl.SrcMsize   = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthFourBytes;
+        pHalGdmaAdapter->GdmaCtl.DestMsize = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthFourBytes; 
+        FourBytesAlign = 1;
+    }
+    else{
+        pHalGdmaAdapter->GdmaCtl.SrcMsize   = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthOneByte;
+        pHalGdmaAdapter->GdmaCtl.DestMsize = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthOneByte;
+        FourBytesAlign = 0;
+    }
+    
+    for(BlockIndex = 0; BlockIndex < BlockNumber; BlockIndex++){
+       
+        pHalGdmaObj->GdmaChLli[BlockIndex].Sarx = pHalGdmaBlock[BlockIndex].SrcAddr;
+        pHalGdmaObj->GdmaChLli[BlockIndex].Darx = pHalGdmaBlock[BlockIndex].DstAddr;
+        pHalGdmaObj->BlockSizeList[BlockIndex].pNextBlockSiz = &pHalGdmaObj->BlockSizeList[BlockIndex + 1];
+
+        if(FourBytesAlign){
+            pHalGdmaObj->BlockSizeList[BlockIndex].BlockSize = pHalGdmaBlock[BlockIndex].BlockLength >> 2;
+        }
+        else{
+            pHalGdmaObj->BlockSizeList[BlockIndex].BlockSize = pHalGdmaBlock[BlockIndex].BlockLength;
+        }
+        
+        pHalGdmaObj->Lli[BlockIndex].pLliEle = (GDMA_CH_LLI_ELE*) &pHalGdmaObj->GdmaChLli[BlockIndex];
+        pHalGdmaObj->Lli[BlockIndex].pNextLli = &pHalGdmaObj->Lli[BlockIndex + 1];
+
+
+        if(BlockIndex == BlockNumber - 1){
+            pHalGdmaObj->BlockSizeList[BlockIndex].pNextBlockSiz = NULL;
+            pHalGdmaObj->Lli[BlockIndex].pNextLli = NULL;
+        }
+        //DBG_GDMA_INFO("Lli[%d].pLiEle = %x\r\n", BlockIndex,Lli[BlockIndex].pLliEle);
+        //DBG_GDMA_INFO("Lli[%d].pNextLli = %x\r\n", BlockIndex,Lli[BlockIndex].pNextLli);
+    }
+
+    pHalGdmaAdapter->pBlockSizeList = (struct BLOCK_SIZE_LIST*) &pHalGdmaObj->BlockSizeList;
+    pHalGdmaAdapter->pLlix = (struct GDMA_CH_LLI*) &pHalGdmaObj->Lli;
+    //DBG_GDMA_INFO("pHalGdmaAdapter->pBlockSizeList = %x\r\n", pHalGdmaAdapter->pBlockSizeList);
+    //DBG_GDMA_INFO("pHalGdmaAdapter->pLlix  = %x\r\n", pHalGdmaAdapter->pLlix );
+}
+
+VOID HalGdmaLLPMemAlign(PHAL_GDMA_OBJ pHalGdmaObj, PHAL_GDMA_BLOCK pHalGdmaBlock)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PGDMA_CH_LLI_ELE pLliEle;
+    struct GDMA_CH_LLI *pGdmaChLli;
+    struct BLOCK_SIZE_LIST *pGdmaChBkLi;
+    u32 CtlxLow;
+    u32 CtlxUp;
+    u8 BlockNumber;
+    u8 BlockIndex;
+    
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+    BlockNumber = pHalGdmaObj->BlockNum;
+    
+    pLliEle = pHalGdmaAdapter->pLlix->pLliEle;
+    pGdmaChLli = pHalGdmaAdapter->pLlix->pNextLli;
+    pGdmaChBkLi = pHalGdmaAdapter->pBlockSizeList;
+    
+    //4 Move to the second block to configure Memory Alginment setting
+    pLliEle->Llpx = (u32) pGdmaChLli->pLliEle;
+    pGdmaChBkLi = pGdmaChBkLi ->pNextBlockSiz;
+    
+    for(BlockIndex = 1; BlockIndex < BlockNumber; BlockIndex++){
+        pLliEle = pGdmaChLli->pLliEle;
+        CtlxLow = pLliEle->CtlxLow;
+        CtlxLow &= (BIT_INVC_CTLX_LO_DST_TR_WIDTH & BIT_INVC_CTLX_LO_SRC_TR_WIDTH);
+        CtlxUp = pLliEle->CtlxUp;    
+        CtlxUp &= (BIT_INVC_CTLX_UP_BLOCK_BS);
+
+        if(((pHalGdmaBlock[BlockIndex].SrcAddr & 0x03) == 0) &&((pHalGdmaBlock[BlockIndex].DstAddr & 0x03) == 0) 
+            && ((pHalGdmaBlock[BlockIndex].BlockLength & 0X03) == 0)){
+            pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthFourBytes;
+            pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthFourBytes;
+            pGdmaChBkLi->BlockSize = pHalGdmaBlock[BlockIndex].BlockLength>> 2;
+
+        }
+        else{
+            pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthOneByte;
+            pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthOneByte;
+            pGdmaChBkLi->BlockSize = pHalGdmaBlock[BlockIndex].BlockLength;
+        }
+
+        CtlxLow |= (BIT_CTLX_LO_DST_TR_WIDTH(pHalGdmaAdapter->GdmaCtl.DstTrWidth) |
+              BIT_CTLX_LO_SRC_TR_WIDTH(pHalGdmaAdapter->GdmaCtl.SrcTrWidth));
+        CtlxUp |= BIT_CTLX_UP_BLOCK_BS(pGdmaChBkLi->BlockSize);  
+
+        pGdmaChLli = pGdmaChLli->pNextLli;
+        pGdmaChBkLi = pGdmaChBkLi->pNextBlockSiz;    
+        pLliEle->CtlxLow = CtlxLow;
+        pLliEle->CtlxUp = CtlxUp;
+        pLliEle->Llpx = (u32)(pGdmaChLli->pLliEle);
+
+    }
+}
+
+VOID HalGdmaMemAggr(PHAL_GDMA_OBJ pHalGdmaObj, PHAL_GDMA_BLOCK pHalGdmaBlock)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    
+    u8 BlockNumber;
+
+    BlockNumber = pHalGdmaObj->BlockNum;
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+
+    if (pHalGdmaObj->Busy) {
+        DBG_GDMA_ERR("%s: ==> GDMA is Busy\r\n", __FUNCTION__);
+        return;
+    }
+    pHalGdmaObj->Busy = 1;
+
+    pHalGdmaAdapter->MaxMuliBlock = BlockNumber;
+    pHalGdmaAdapter->ChSar = pHalGdmaBlock[0].SrcAddr;
+    pHalGdmaAdapter->ChDar = pHalGdmaBlock[0].DstAddr;
+    
+    HalGdmaMultiBlockSetting(pHalGdmaObj, pHalGdmaBlock);    
+    HalGdmaOn((pHalGdmaAdapter));
+    HalGdmaChIsrEn((pHalGdmaAdapter));
+    HalGdmaChBlockSeting((pHalGdmaAdapter));
+    HalGdmaLLPMemAlign(pHalGdmaObj, pHalGdmaBlock);
+    HalGdmaChEn((pHalGdmaAdapter));
+
+}
+
+
+
+BOOL HalGdmaMemCpyInit(PHAL_GDMA_OBJ pHalGdmaObj)
+{
+    HAL_GDMA_CHNL *pgdma_chnl;
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PIRQ_HANDLE pGdmaIrqHandle;
+    IRQ_HANDLE IrqHandle;
+
+    pgdma_chnl = HalGdmaChnlAlloc(NULL);    // get a whatever GDMA channel
+    if (NULL == pgdma_chnl) {        
+        DBG_GDMA_ERR("%s: Cannot allocate a GDMA Channel\n", __FUNCTION__);
+        return _FALSE;
+    }
+
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+    pGdmaIrqHandle = &(pHalGdmaObj->GdmaIrqHandle);
+    
+    DBG_GDMA_INFO("%s: Use GDMA%d CH%d\n", __FUNCTION__, pgdma_chnl->GdmaIndx, pgdma_chnl->GdmaChnl);
+#if 0
+    if (pgdma_chnl->GdmaIndx == 0) {
+        ACTCK_GDMA0_CCTRL(ON);
+        GDMA0_FCTRL(ON);
+    }
+    else if (pgdma_chnl->GdmaIndx == 1) {
+        ACTCK_GDMA1_CCTRL(ON);
+        GDMA1_FCTRL(ON);
+    }
+#endif    
+    _memset((void *)pHalGdmaAdapter, 0, sizeof(HAL_GDMA_ADAPTER));
+
+//    pHalGdmaAdapter->GdmaCtl.TtFc = TTFCMemToMem;
+    pHalGdmaAdapter->GdmaCtl.Done = 1;
+//    pHalGdmaAdapter->MuliBlockCunt = 0;
+//    pHalGdmaAdapter->MaxMuliBlock = 1;
+    pHalGdmaAdapter->ChNum = pgdma_chnl->GdmaChnl;
+    pHalGdmaAdapter->GdmaIndex = pgdma_chnl->GdmaIndx;
+    pHalGdmaAdapter->ChEn = 0x0101 << pgdma_chnl->GdmaChnl;
+    pHalGdmaAdapter->GdmaIsrType = (TransferType|ErrType);
+    pHalGdmaAdapter->IsrCtrl = ENABLE;
+    pHalGdmaAdapter->GdmaOnOff = ON;
+
+    pHalGdmaAdapter->GdmaCtl.IntEn      = 1;
+//    pHalGdmaAdapter->GdmaCtl.SrcMsize   = MsizeEight;
+//    pHalGdmaAdapter->GdmaCtl.DestMsize  = MsizeEight;
+//    pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthFourBytes;
+//    pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthFourBytes;
+//    pHalGdmaAdapter->GdmaCtl.Dinc = IncType;
+//    pHalGdmaAdapter->GdmaCtl.Sinc = IncType;
+
+    pGdmaIrqHandle->IrqNum = pgdma_chnl->IrqNum;
+    pGdmaIrqHandle->Priority = 10;
+
+    IrqHandle.IrqFun = (IRQ_FUN) HalGdmaMemIrqHandler;
+    IrqHandle.Data = (u32) pHalGdmaObj;
+    IrqHandle.IrqNum = pGdmaIrqHandle->IrqNum;
+    IrqHandle.Priority = pGdmaIrqHandle->Priority;
+
+    InterruptRegister(&IrqHandle);
+    InterruptEn(&IrqHandle);
+    pHalGdmaObj->Busy = 0;
+    
+    return _TRUE;
+}
+
+VOID HalGdmaMemCpyDeInit(PHAL_GDMA_OBJ pHalGdmaObj)
+{
+    HAL_GDMA_CHNL GdmaChnl;
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PIRQ_HANDLE pGdmaIrqHandle;
+
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+    pGdmaIrqHandle = &(pHalGdmaObj->GdmaIrqHandle);
+
+    GdmaChnl.GdmaIndx = pHalGdmaAdapter->GdmaIndex;
+    GdmaChnl.GdmaChnl = pHalGdmaAdapter->ChNum;
+    GdmaChnl.IrqNum = pGdmaIrqHandle->IrqNum;
+    HalGdmaChnlFree(&GdmaChnl);
+}
+
+// If multi-task using the same GDMA Object, then it needs a mutex to protect this procedure
+VOID* HalGdmaMemCpy(PHAL_GDMA_OBJ pHalGdmaObj, void* pDest, void* pSrc, u32 len)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+
+    if (pHalGdmaObj->Busy) {
+        DBG_GDMA_ERR("%s: ==> GDMA is Busy\r\n", __FUNCTION__);
+        return 0;
+    }
+    pHalGdmaObj->Busy = 1;
+    pHalGdmaAdapter = &(pHalGdmaObj->HalGdmaAdapter);
+
+    DBG_GDMA_INFO("%s: ==> Src=0x%x Dst=0x%x Len=%d\r\n", __FUNCTION__, pSrc, pDest, len);
+    if ((((u32)pSrc & 0x03)==0) &&
+        (((u32)pDest & 0x03)==0) &&        
+        ((len & 0x03)== 0)) {
+        // 4-bytes aligned, move 4 bytes each transfer
+        pHalGdmaAdapter->GdmaCtl.SrcMsize   = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthFourBytes;
+        pHalGdmaAdapter->GdmaCtl.DestMsize = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthFourBytes;
+        pHalGdmaAdapter->GdmaCtl.BlockSize = len >> 2;
+    }
+    else {
+        pHalGdmaAdapter->GdmaCtl.SrcMsize   = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.SrcTrWidth = TrWidthOneByte;
+        pHalGdmaAdapter->GdmaCtl.DestMsize = MsizeEight;
+        pHalGdmaAdapter->GdmaCtl.DstTrWidth = TrWidthOneByte;
+        pHalGdmaAdapter->GdmaCtl.BlockSize = len;
+    }
+
+    pHalGdmaAdapter->ChSar = (u32)pSrc;
+    pHalGdmaAdapter->ChDar = (u32)pDest;                
+    pHalGdmaAdapter->PacketLen = len;
+
+    HalGdmaOn((pHalGdmaAdapter));
+    HalGdmaChIsrEn((pHalGdmaAdapter));
+    HalGdmaChSeting((pHalGdmaAdapter));
+    HalGdmaChEn((pHalGdmaAdapter));
+
+    return (pDest);
+}
+
+#endif // CONFIG_GDMA_EN
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_gpio.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_gpio.c
@ -0,0 +1,207 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#include "rtl8195a.h"
+
+#ifdef CONFIG_GPIO_EN
+
+HAL_GPIO_ADAPTER gHAL_Gpio_Adapter;
+extern PHAL_GPIO_ADAPTER _pHAL_Gpio_Adapter;
+
+extern VOID GPIO_PullCtrl_8195a(u32 chip_pin, u8 pull_type);
+
+/**
+  * @brief  To get the GPIO IP Pin name for the given chip pin name
+  *
+  * @param  chip_pin: The chip pin name.
+  *
+  * @retval The gotten GPIO IP pin name
+  */
+u32 
+HAL_GPIO_GetPinName(
+    u32 chip_pin
+)
+{
+    return HAL_GPIO_GetIPPinName_8195a((u32)chip_pin);
+}
+
+/**
+  * @brief  Set the GPIO pad Pull type
+  *
+  *  @param    pin: The pin for pull type control.
+  *  @param    mode: the pull type for the pin.
+  *  @return   None
+  */
+VOID 
+HAL_GPIO_PullCtrl(
+    u32 pin,
+    u32 mode    
+)
+{
+    u8 pull_type;
+
+    switch (mode) {
+        case hal_PullNone:
+            pull_type = DIN_PULL_NONE;
+            break;
+            
+        case hal_PullDown:
+            pull_type = DIN_PULL_LOW;
+            break;
+            
+        case hal_PullUp:
+            pull_type = DIN_PULL_HIGH;
+            break;
+            
+        case hal_OpenDrain:
+        default:
+            pull_type = DIN_PULL_NONE;
+            break;
+    }
+
+//    HAL_GPIO_PullCtrl_8195a (pin, pull_type);
+    GPIO_PullCtrl_8195a (pin, pull_type);
+}
+
+
+/**
+  * @brief  Initializes a GPIO Pin by the GPIO_Pin parameters.
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin initialization.
+  *
+  * @retval HAL_Status
+  */
+VOID 
+HAL_GPIO_Init(
+    HAL_GPIO_PIN  *GPIO_Pin
+)
+{
+    u8 port_num;
+    u8 pin_num;
+    u32 chip_pin;
+    HAL_Status ret;
+
+    if (_pHAL_Gpio_Adapter == NULL) {
+        _pHAL_Gpio_Adapter = &gHAL_Gpio_Adapter;
+//        DBG_GPIO_INFO("HAL_GPIO_Init: Initial GPIO Adapter\n ");
+    }
+
+    port_num = HAL_GPIO_GET_PORT_BY_NAME(GPIO_Pin->pin_name);
+    pin_num = HAL_GPIO_GET_PIN_BY_NAME(GPIO_Pin->pin_name);
+    chip_pin = GPIO_GetChipPinName_8195a(port_num, pin_num);
+    if (GpioFunctionChk(chip_pin, ENABLE) == _FALSE) {
+//    	if((chip_pin > 0x03) && (chip_pin != 0x25)) {
+    		DBG_GPIO_ERR("HAL_GPIO_Init: GPIO Pin(%x) Unavailable\n ", chip_pin);
+    		return;
+//    	}
+//    	else DBG_GPIO_WARN("HAL_GPIO_Init: GPIO Pin(%x) Warning for RTL8710AF!\n ", chip_pin);
+    }
+
+    // Make the pin pull control default as High-Z
+    GPIO_PullCtrl_8195a(chip_pin, HAL_GPIO_HIGHZ);
+
+    ret = HAL_GPIO_Init_8195a(GPIO_Pin);
+    
+    if (ret != HAL_OK) {
+        GpioFunctionChk(chip_pin, DISABLE);
+    }
+}
+
+/**
+  * @brief  Initializes a GPIO Pin as a interrupt signal
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin initialization.
+  *
+  * @retval HAL_Status
+  */
+VOID 
+HAL_GPIO_Irq_Init(
+    HAL_GPIO_PIN  *GPIO_Pin
+)
+{
+    u8 port_num;
+    u8 pin_num;
+    u32 chip_pin;
+    HAL_Status ret;
+    
+    if (_pHAL_Gpio_Adapter == NULL) {
+        _pHAL_Gpio_Adapter = &gHAL_Gpio_Adapter;
+//        DBG_GPIO_INFO("%s: Initial GPIO Adapter\n ", __FUNCTION__);
+    }
+
+    if (_pHAL_Gpio_Adapter->IrqHandle.IrqFun == NULL) {
+        _pHAL_Gpio_Adapter->IrqHandle.IrqFun = (IRQ_FUN)HAL_GPIO_MbedIrqHandler_8195a;
+        _pHAL_Gpio_Adapter->IrqHandle.Priority = 6;
+        HAL_GPIO_RegIrq_8195a(&_pHAL_Gpio_Adapter->IrqHandle);        
+        InterruptEn(&_pHAL_Gpio_Adapter->IrqHandle);
+//        DBG_GPIO_INFO("%s: Initial GPIO IRQ Adapter\n ", __FUNCTION__);
+    }
+
+    port_num = HAL_GPIO_GET_PORT_BY_NAME(GPIO_Pin->pin_name);
+    pin_num = HAL_GPIO_GET_PIN_BY_NAME(GPIO_Pin->pin_name);
+    chip_pin = GPIO_GetChipPinName_8195a(port_num, pin_num);
+    if (GpioFunctionChk(chip_pin, ENABLE) == _FALSE) {
+        DBG_GPIO_ERR("HAL_GPIO_Irq_Init: GPIO Pin(%x) Unavailable\n ", chip_pin);
+        return;
+    }
+
+    DBG_GPIO_INFO("HAL_GPIO_Irq_Init: GPIO(name=0x%x)(mode=%d)\n ", GPIO_Pin->pin_name, 
+        GPIO_Pin->pin_mode);
+    HAL_GPIO_MaskIrq_8195a(GPIO_Pin);
+    ret = HAL_GPIO_Init_8195a(GPIO_Pin);
+    if (ret != HAL_OK) {
+        GpioFunctionChk(chip_pin, DISABLE);
+    }    
+}
+
+/**
+  * @brief  UnInitial GPIO Adapter
+  *
+  *
+  * @retval HAL_Status
+  */
+VOID
+HAL_GPIO_IP_DeInit(
+    VOID
+)
+{
+    if (_pHAL_Gpio_Adapter != NULL) {
+        InterruptDis(&_pHAL_Gpio_Adapter->IrqHandle);
+        HAL_GPIO_UnRegIrq_8195a(&_pHAL_Gpio_Adapter->IrqHandle);                
+        _pHAL_Gpio_Adapter = NULL;
+    }
+    
+}
+
+/**
+  * @brief  De-Initializes a GPIO Pin, reset it as default setting.
+  *
+  * @param  GPIO_Pin: The data structer which contains the parameters for the GPIO Pin.
+  *
+  * @retval HAL_Status
+  */
+VOID 
+HAL_GPIO_DeInit(
+    HAL_GPIO_PIN  *GPIO_Pin
+)
+{
+    u8 port_num;
+    u8 pin_num;
+    u32 chip_pin;
+    
+    port_num = HAL_GPIO_GET_PORT_BY_NAME(GPIO_Pin->pin_name);
+    pin_num = HAL_GPIO_GET_PIN_BY_NAME(GPIO_Pin->pin_name);
+    chip_pin = GPIO_GetChipPinName_8195a(port_num, pin_num);
+    HAL_GPIO_DeInit_8195a(GPIO_Pin);
+
+    GpioFunctionChk(chip_pin, DISABLE);
+}
+
+
+#endif // CONFIG_GPIO_EN
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_i2c.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_i2c.c
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_i2s.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_i2s.c
@ -0,0 +1,562 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "rtl8195a.h"
+#include "hal_i2s.h"
+#include "rand.h"
+#include "rtl_utility.h"
+
+#ifdef CONFIG_I2S_EN
+
+//1 need to be modified 
+
+
+/*======================================================
+    Local used variables
+*/
+SRAM_BF_DATA_SECTION
+HAL_I2S_OP HalI2SOpSAL={0};
+
+
+VOID
+I2SISRHandle(
+    IN  VOID *Data
+)
+{
+    PHAL_I2S_ADAPTER pI2SAdp = (PHAL_I2S_ADAPTER) Data;
+    PHAL_I2S_OP     pHalI2SOP = &HalI2SOpSAL;
+    PHAL_I2S_INIT_DAT pI2SCfg = pI2SAdp->pInitDat;
+    u32 I2STxIsr, I2SRxIsr;
+    u8  I2SPageNum = pI2SCfg->I2SPageNum+1;
+//    u32 I2SPageSize = (pI2SAdp->I2SPageSize+1)<<2;
+    u32 i;
+    u32 pbuf;
+
+    I2STxIsr = pHalI2SOP->HalI2SReadReg(pI2SCfg, REG_I2S_TX_STATUS_INT);
+    I2SRxIsr = pHalI2SOP->HalI2SReadReg(pI2SCfg, REG_I2S_RX_STATUS_INT);
+
+    pI2SCfg->I2STxIntrClr = I2STxIsr;
+    pI2SCfg->I2SRxIntrClr = I2SRxIsr;
+    pHalI2SOP->HalI2SClrIntr(pI2SCfg);
+
+    for (i=0 ; i<I2SPageNum ; i++) { // page 0, 1, 2, 3
+        if (I2STxIsr & (1<<pI2SCfg->I2SHWTxIdx)) {
+//            pbuf = ((u32)(pI2SCfg->I2STxData)) + (I2SPageSize*pI2SCfg->I2SHWTxIdx);
+            pbuf = (u32)pI2SAdp->TxPageList[pI2SCfg->I2SHWTxIdx];
+            pI2SAdp->UserCB.TxCCB(pI2SAdp->UserCB.TxCBId, (char*)pbuf);
+            I2STxIsr &= ~(1<<pI2SCfg->I2SHWTxIdx);
+            pI2SCfg->I2SHWTxIdx += 1;
+            if (pI2SCfg->I2SHWTxIdx == I2SPageNum) {
+                pI2SCfg->I2SHWTxIdx = 0;
+            }
+        }
+        
+        if (I2SRxIsr & (1<<pI2SCfg->I2SHWRxIdx)) {
+//            pbuf = ((u32)(pI2SCfg->I2SRxData)) + (I2SPageSize*pI2SCfg->I2SHWRxIdx);
+            pbuf = (u32)pI2SAdp->RxPageList[pI2SCfg->I2SHWRxIdx];
+            pI2SAdp->UserCB.RxCCB(pI2SAdp->UserCB.RxCBId, (char*)pbuf);
+            I2SRxIsr &= ~(1<<pI2SCfg->I2SHWRxIdx);
+            pI2SCfg->I2SHWRxIdx += 1;
+            if (pI2SCfg->I2SHWRxIdx == I2SPageNum) {
+                pI2SCfg->I2SHWRxIdx = 0;
+            }
+        }
+    }
+}
+
+
+static HAL_Status
+RtkI2SIrqInit(
+    IN  PHAL_I2S_ADAPTER pI2SAdapter
+)
+{
+    PIRQ_HANDLE pIrqHandle;
+
+    if (pI2SAdapter->DevNum > I2S_MAX_ID) {
+        DBG_I2S_ERR("RtkI2SIrqInit: Invalid I2S Index(&d)\r\n", pI2SAdapter->DevNum);
+        return HAL_ERR_PARA;
+    }
+    
+    pIrqHandle = &pI2SAdapter->IrqHandle;
+    
+    switch (pI2SAdapter->DevNum){
+        case I2S0_SEL:
+            pIrqHandle->IrqNum = I2S0_PCM0_IRQ;
+            break;
+            
+        case I2S1_SEL:
+            pIrqHandle->IrqNum = I2S1_PCM1_IRQ;
+            break;
+            
+        default:
+            return HAL_ERR_PARA;
+    }
+
+    pIrqHandle->Data = (u32) (pI2SAdapter);
+    pIrqHandle->IrqFun = (IRQ_FUN) I2SISRHandle;
+    pIrqHandle->Priority = 6;
+    InterruptRegister(pIrqHandle);
+    InterruptEn(pIrqHandle);
+    
+    return HAL_OK;
+}
+
+static HAL_Status
+RtkI2SIrqDeInit(
+    IN  PHAL_I2S_ADAPTER pI2SAdapter
+)
+{
+    if (pI2SAdapter->DevNum > I2S_MAX_ID) {
+        DBG_I2S_ERR("RtkI2SIrqDeInit: Invalid I2S Index(&d)\r\n", pI2SAdapter->DevNum);
+        return HAL_ERR_PARA;
+    }
+
+    InterruptDis(&pI2SAdapter->IrqHandle);
+    InterruptUnRegister(&pI2SAdapter->IrqHandle);  
+
+    return HAL_OK;
+}
+
+static HAL_Status
+RtkI2SPinMuxInit(
+    IN  PHAL_I2S_ADAPTER pI2SAdapter
+)
+{
+    u32 I2Stemp;
+
+    if (pI2SAdapter->DevNum > I2S_MAX_ID) {
+        DBG_I2S_ERR("RtkI2SPinMuxInit: Invalid I2S Index(&d)\r\n", pI2SAdapter->DevNum);
+        return HAL_ERR_PARA;
+    }
+
+    // enable system pll
+    I2Stemp = HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_SYSPLL_CTRL1) | (1<<9) | (1<<10);
+    HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_SYSPLL_CTRL1, I2Stemp);
+
+    switch (pI2SAdapter->DevNum){
+        case I2S0_SEL:
+            ACTCK_I2S_CCTRL(ON);
+            SLPCK_I2S_CCTRL(ON);
+            LXBUS_FCTRL(ON); // enable lx bus for i2s
+            
+            /*I2S0 Pin Mux Setting*/
+            PinCtrl(I2S0, pI2SAdapter->PinMux, ON);
+            if (pI2SAdapter->PinMux == I2S_S0) {
+                DBG_I2S_WARN(ANSI_COLOR_MAGENTA"I2S0 Pin may conflict with JTAG\r\n"ANSI_COLOR_RESET);
+            }
+            I2S0_MCK_CTRL(ON);
+            I2S0_PIN_CTRL(ON);
+            I2S0_FCTRL(ON);
+            
+            break;
+        case I2S1_SEL:
+            ACTCK_I2S_CCTRL(ON);
+            SLPCK_I2S_CCTRL(ON);
+            LXBUS_FCTRL(ON); // enable lx bus for i2s
+            
+            /*I2S1 Pin Mux Setting*/
+            PinCtrl(I2S1, pI2SAdapter->PinMux, ON);
+            if (pI2SAdapter->PinMux == I2S_S2) {
+                DBG_I2S_WARN(ANSI_COLOR_MAGENTA"I2S1 Pin may conflict with JTAG\r\n"ANSI_COLOR_RESET);
+            }
+            I2S1_MCK_CTRL(ON);
+            I2S1_PIN_CTRL(ON);
+            I2S0_FCTRL(ON); //i2s 1 is control by bit 24 BIT_PERI_I2S0_EN
+            I2S1_FCTRL(ON);
+            break;
+        default:
+            return HAL_ERR_PARA;
+    }
+    
+    return HAL_OK;
+}
+
+
+static HAL_Status
+RtkI2SPinMuxDeInit(
+    IN  PHAL_I2S_ADAPTER pI2SAdapter
+)
+{
+    if (pI2SAdapter->DevNum > I2S_MAX_ID) {
+        DBG_I2S_ERR("RtkI2SPinMuxDeInit: Invalid I2S Index(&d)\r\n", pI2SAdapter->DevNum);
+        return HAL_ERR_PARA;
+    }
+
+    switch (pI2SAdapter->DevNum){
+        case I2S0_SEL:
+            /*I2S0 Pin Mux Setting*/
+            //ACTCK_I2C0_CCTRL(OFF);
+            PinCtrl(I2S0, pI2SAdapter->PinMux, OFF);
+            I2S0_MCK_CTRL(OFF);
+            I2S0_PIN_CTRL(OFF);
+            //I2S0_FCTRL(OFF);
+            
+            break;
+        case I2S1_SEL:
+            /*I2S1 Pin Mux Setting*/
+            //ACTCK_I2C1_CCTRL(OFF);
+            PinCtrl(I2S1, pI2SAdapter->PinMux, OFF);
+            I2S1_MCK_CTRL(OFF);
+            I2S1_PIN_CTRL(OFF);
+            //I2S1_FCTRL(OFF);
+            break;
+        default:
+            return HAL_ERR_PARA;
+    }
+    
+    return HAL_OK;
+}
+
+
+HAL_Status
+RtkI2SInit(
+    IN  VOID *Data
+)
+{
+    PHAL_I2S_ADAPTER pI2SAdapter = (PHAL_I2S_ADAPTER) Data;
+    PHAL_I2S_OP     pHalI2SOP  = &HalI2SOpSAL;
+    PHAL_I2S_INIT_DAT pI2SCfg;
+
+    if (pI2SAdapter == 0) {
+        DBG_I2S_ERR("RtkI2SInit: Null Pointer\r\n");
+        return HAL_ERR_PARA;
+    }
+    
+    if (pI2SAdapter->DevNum > I2S_MAX_ID) {
+        DBG_I2S_ERR("RtkI2SInit: Invalid I2S Index(&d)\r\n", pI2SAdapter->DevNum);
+        return HAL_ERR_PARA;
+    }
+
+    pI2SCfg = pI2SAdapter->pInitDat;
+
+    /*I2S Initialize HAL Operations*/
+    HalI2SOpInit(pHalI2SOP);
+    
+    /*I2S Interrupt Initialization*/
+    RtkI2SIrqInit(pI2SAdapter);
+
+    /*I2S Pin Mux Initialization*/
+    RtkI2SPinMuxInit(pI2SAdapter);
+
+    /*I2S Load User Setting*/
+    pI2SCfg->I2SIdx = pI2SAdapter->DevNum;
+
+    /*I2S HAL Initialization*/
+    pHalI2SOP->HalI2SInit(pI2SCfg);
+
+    /*I2S Device Status Update*/
+    pI2SAdapter->DevSts  = I2S_STS_INITIALIZED;
+    
+    /*I2S Enable Module*/
+    pI2SCfg->I2SEn = I2S_ENABLE;
+    pHalI2SOP->HalI2SEnable(pI2SCfg);
+
+    /*I2S Device Status Update*/
+    pI2SAdapter->DevSts  = I2S_STS_IDLE;    
+    
+    return HAL_OK;
+}
+
+HAL_Status
+RtkI2SDeInit(
+    IN  VOID *Data
+)
+{
+    PHAL_I2S_ADAPTER pI2SAdapter = (PHAL_I2S_ADAPTER) Data;
+    PHAL_I2S_OP     pHalI2SOP  = &HalI2SOpSAL;
+    PHAL_I2S_INIT_DAT pI2SCfg;
+    u32 I2Stemp;
+
+    if (pI2SAdapter == 0) {
+        DBG_I2S_ERR("RtkI2SDeInit: Null Pointer\r\n");
+        return HAL_ERR_PARA;
+    }
+
+    pI2SCfg = pI2SAdapter->pInitDat;
+
+    /*I2S Disable Module*/
+    pI2SCfg->I2SEn = I2S_DISABLE;
+    pHalI2SOP->HalI2SEnable(pI2SCfg);
+    HalI2SClearAllOwnBit((VOID*)pI2SCfg);
+
+    /*I2C HAL DeInitialization*/
+    //pHalI2SOP->HalI2SDeInit(pI2SCfg);
+    
+    /*I2S Interrupt DeInitialization*/
+    RtkI2SIrqDeInit(pI2SAdapter);
+
+    /*I2S Pin Mux DeInitialization*/
+    RtkI2SPinMuxDeInit(pI2SAdapter);
+    
+    /*I2S HAL DeInitialization*/
+    pHalI2SOP->HalI2SDeInit(pI2SCfg);
+
+    /*I2S CLK Source Close*/
+    I2Stemp = HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_SYSPLL_CTRL1) & (~((1<<9) | (1<<10)));
+    HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_SYSPLL_CTRL1, I2Stemp);     
+
+    /*I2S Device Status Update*/
+    pI2SAdapter->DevSts  = I2S_STS_UNINITIAL;
+    
+    return HAL_OK;
+}
+
+HAL_Status
+RtkI2SEnable(
+    IN  VOID *Data
+)
+{
+    PHAL_I2S_ADAPTER pI2SAdapter = (PHAL_I2S_ADAPTER) Data;
+    PHAL_I2S_OP     pHalI2SOP  = &HalI2SOpSAL;
+    PHAL_I2S_INIT_DAT pI2SCfg;
+    u32 I2Stemp;
+
+    // Enable IP Clock
+    I2Stemp = HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_SYSPLL_CTRL1) | (1<<9) | (1<<10);
+    HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_SYSPLL_CTRL1, I2Stemp);  
+    ACTCK_I2S_CCTRL(ON);
+    SLPCK_I2S_CCTRL(ON);
+
+    pI2SCfg = pI2SAdapter->pInitDat;
+    pI2SCfg->I2SEn = I2S_ENABLE;
+    pHalI2SOP->HalI2SEnable(pI2SCfg);
+
+    return HAL_OK;
+}
+
+HAL_Status
+RtkI2SDisable(
+    IN  VOID *Data
+)
+{
+    PHAL_I2S_ADAPTER pI2SAdapter = (PHAL_I2S_ADAPTER) Data;
+    PHAL_I2S_OP     pHalI2SOP  = &HalI2SOpSAL;
+    PHAL_I2S_INIT_DAT pI2SCfg;
+    u32 I2Stemp;
+
+    pI2SCfg = pI2SAdapter->pInitDat;
+    pI2SCfg->I2SEn = I2S_DISABLE;
+    pHalI2SOP->HalI2SEnable(pI2SCfg);
+
+    // Gate IP Clock
+    ACTCK_I2S_CCTRL(OFF);
+    SLPCK_I2S_CCTRL(OFF);
+
+    // Close I2S bus clock(WS,SCLK,MCLK). If needs that clock, mark this. 
+    I2Stemp = HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_SYSPLL_CTRL1) & (~((1<<9) | (1<<10)));
+    HAL_WRITE32(SYSTEM_CTRL_BASE, REG_SYS_SYSPLL_CTRL1, I2Stemp);    
+   
+    return HAL_OK;
+}
+
+RTK_STATUS
+RtkI2SIoCtrl(
+    IN  VOID *Data
+)
+{
+    return _EXIT_SUCCESS;
+}
+
+RTK_STATUS
+RtkI2SPowerCtrl(
+    IN  VOID *Data
+)
+{
+    return _EXIT_SUCCESS;
+}
+
+HAL_Status
+RtkI2SLoadDefault( 
+    IN  VOID *Adapter,
+    IN  VOID *Setting
+)
+{
+    PHAL_I2S_ADAPTER pI2SAdapter = (PHAL_I2S_ADAPTER) Adapter;
+    PHAL_I2S_INIT_DAT pI2SCfg = pI2SAdapter->pInitDat;
+    PHAL_I2S_DEF_SETTING pLoadSetting = (PHAL_I2S_DEF_SETTING)Setting;
+
+    if (pI2SAdapter == 0) {
+        DBG_I2S_ERR("RtkI2SLoadDefault: Null Pointer\r\n");
+        return HAL_ERR_PARA;
+    }
+
+    if (pI2SAdapter->pInitDat == NULL) {
+        DBG_I2S_ERR("RtkI2SLoadDefault: pInitDat is NULL!\r\n", pI2SAdapter->DevNum);
+        return HAL_ERR_PARA;
+    }
+
+    pI2SAdapter->DevSts          = pLoadSetting->DevSts;
+    pI2SAdapter->ErrType         = 0;
+    pI2SAdapter->TimeOut         = 0;
+    
+    pI2SCfg->I2SIdx        = pI2SAdapter->DevNum;
+    pI2SCfg->I2SEn         = I2S_DISABLE;
+    pI2SCfg->I2SMaster     = pLoadSetting->I2SMaster;
+    pI2SCfg->I2SWordLen    = pLoadSetting->I2SWordLen;
+    pI2SCfg->I2SChNum      = pLoadSetting->I2SChNum;
+    pI2SCfg->I2SPageNum    = pLoadSetting->I2SPageNum;
+    pI2SCfg->I2SPageSize   = pLoadSetting->I2SPageSize;
+    pI2SCfg->I2SRate       = pLoadSetting->I2SRate;
+    pI2SCfg->I2STRxAct     = pLoadSetting->I2STRxAct;
+    pI2SCfg->I2STxIntrMSK  = pLoadSetting->I2STxIntrMSK;
+    pI2SCfg->I2SRxIntrMSK  = pLoadSetting->I2SRxIntrMSK;
+
+    return HAL_OK;
+}
+
+VOID HalI2SOpInit(
+    IN  VOID *Data
+)
+{
+    PHAL_I2S_OP pHalI2SOp = (PHAL_I2S_OP) Data;
+
+    pHalI2SOp->HalI2SDeInit      = HalI2SDeInitRtl8195a;
+    pHalI2SOp->HalI2STx          = HalI2STxRtl8195a;
+    pHalI2SOp->HalI2SRx          = HalI2SRxRtl8195a;
+    pHalI2SOp->HalI2SEnable      = HalI2SEnableRtl8195a;
+    pHalI2SOp->HalI2SIntrCtrl    = HalI2SIntrCtrlRtl8195a;
+    pHalI2SOp->HalI2SReadReg     = HalI2SReadRegRtl8195a;
+    pHalI2SOp->HalI2SClrIntr     = HalI2SClrIntrRtl8195a;
+    pHalI2SOp->HalI2SClrAllIntr  = HalI2SClrAllIntrRtl8195a;
+    pHalI2SOp->HalI2SDMACtrl     = HalI2SDMACtrlRtl8195a;
+
+#ifndef CONFIG_CHIP_E_CUT
+    pHalI2SOp->HalI2SInit        = HalI2SInitRtl8195a_Patch;
+    pHalI2SOp->HalI2SSetRate     = HalI2SSetRateRtl8195a;
+    pHalI2SOp->HalI2SSetWordLen  = HalI2SSetWordLenRtl8195a;
+    pHalI2SOp->HalI2SSetChNum    = HalI2SSetChNumRtl8195a;
+    pHalI2SOp->HalI2SSetPageNum  = HalI2SSetPageNumRtl8195a;
+    pHalI2SOp->HalI2SSetPageSize = HalI2SSetPageSizeRtl8195a;
+#else
+    pHalI2SOp->HalI2SInit        = HalI2SInitRtl8195a_V04;
+    pHalI2SOp->HalI2SSetRate     = HalI2SSetRateRtl8195a_V04;
+    pHalI2SOp->HalI2SSetWordLen  = HalI2SSetWordLenRtl8195a_V04;
+    pHalI2SOp->HalI2SSetChNum    = HalI2SSetChNumRtl8195a_V04;
+    pHalI2SOp->HalI2SSetPageNum  = HalI2SSetPageNumRtl8195a_V04;
+    pHalI2SOp->HalI2SSetPageSize = HalI2SSetPageSizeRtl8195a_V04;
+#endif  // #ifndef CONFIG_CHIP_E_CUT
+}
+
+HAL_Status 
+HalI2SInit(
+    IN VOID *Data
+)
+{
+    HAL_Status ret;
+    PHAL_I2S_ADAPTER pI2SAdapter = (PHAL_I2S_ADAPTER) Data;
+    u32 Function;
+    u8 funret;    
+    
+#ifdef CONFIG_SOC_PS_MODULE
+    REG_POWER_STATE I2sPwrState;
+#endif
+
+    if(pI2SAdapter->DevNum == 0){
+        Function = I2S0;
+    }
+    else {
+        Function = I2S1;
+    }
+        
+    funret = FunctionChk(Function, (u32)pI2SAdapter->PinMux);
+
+    if (funret == _FALSE){
+        return HAL_ERR_HW;
+    }
+
+    ret = RtkI2SInit(Data);
+#ifdef CONFIG_SOC_PS_MODULE
+    if(ret == HAL_OK) {
+        // To register a new peripheral device power state
+        I2sPwrState.FuncIdx = I2S0 + pI2SAdapter->DevNum;
+        I2sPwrState.PwrState = ACT;
+        RegPowerState(I2sPwrState);
+    }
+#endif
+
+    return ret;
+
+}
+
+VOID 
+HalI2SDeInit(
+    IN VOID *Data
+)
+{
+#ifdef CONFIG_SOC_PS_MODULE
+    REG_POWER_STATE I2sPwrState;
+    PHAL_I2S_ADAPTER pI2SAdapter = (PHAL_I2S_ADAPTER) Data;
+    u8 HwState;
+
+    I2sPwrState.FuncIdx = I2S0 + pI2SAdapter->DevNum;
+    QueryRegPwrState(I2sPwrState.FuncIdx, &(I2sPwrState.PwrState), &HwState);
+
+    // if the power state isn't ACT, then switch the power state back to ACT first
+    if ((I2sPwrState.PwrState != ACT) && (I2sPwrState.PwrState != INACT)) {
+        HalI2SEnable(Data);
+        QueryRegPwrState(I2sPwrState.FuncIdx, &(I2sPwrState.PwrState), &HwState);
+    }
+
+    if (I2sPwrState.PwrState == ACT) {
+        I2sPwrState.PwrState = INACT;
+        RegPowerState(I2sPwrState);
+    }   
+#endif
+
+    RtkI2SDeInit(Data);  
+
+}
+
+
+HAL_Status 
+HalI2SDisable(
+    IN VOID *Data
+)
+{
+    HAL_Status ret;
+#ifdef CONFIG_SOC_PS_MODULE
+    REG_POWER_STATE I2sPwrState;
+    PHAL_I2S_ADAPTER pI2SAdapter = (PHAL_I2S_ADAPTER) Data;
+#endif
+
+    ret = RtkI2SDisable(Data);
+#ifdef CONFIG_SOC_PS_MODULE
+    if (ret == HAL_OK) {
+        I2sPwrState.FuncIdx = I2S0 + pI2SAdapter->DevNum;
+        I2sPwrState.PwrState = SLPCG;
+        RegPowerState(I2sPwrState);
+    }
+#endif
+    return ret;
+}
+
+HAL_Status 
+HalI2SEnable(
+    IN VOID *Data
+)
+{
+    HAL_Status ret;
+#ifdef CONFIG_SOC_PS_MODULE
+    REG_POWER_STATE I2sPwrState;
+    PHAL_I2S_ADAPTER pI2SAdapter = (PHAL_I2S_ADAPTER) Data;
+#endif
+
+    ret = RtkI2SEnable(Data);
+#ifdef CONFIG_SOC_PS_MODULE
+    if (ret == HAL_OK) {
+        I2sPwrState.FuncIdx = I2S0 + pI2SAdapter->DevNum;
+        I2sPwrState.PwrState = ACT;
+        RegPowerState(I2sPwrState);
+    }
+#endif
+    return ret;
+}
+
+#endif // CONFIG_I2S_EN
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_log_uart.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_log_uart.c
@ -0,0 +1,442 @@
+/*
+ * hal_log_uart.c
+ *
+ *  Created on: 08/10/2016
+ *      Author: pvvx
+ */
+#include "rtl8195a.h"
+
+#ifdef CONFIG_LOG_UART_EN
+
+#include "hal_log_uart.h"
+
+//-------------------------------------------------------------------------
+// Function declarations
+/*
+VOID HalLogUartIrqHandle(VOID * Data);
+VOID HalLogUartSetBaudRate(HAL_LOG_UART_ADAPTER *pUartAdapter);
+VOID HalLogUartSetLineCtrl(HAL_LOG_UART_ADAPTER *pUartAdapter);
+VOID HalLogUartSetIntEn(HAL_LOG_UART_ADAPTER *pUartAdapter);
+u32 HalLogUartInitSetting(HAL_LOG_UART_ADAPTER *pUartAdapter);
+u32 HalLogUartRecv(HAL_LOG_UART_ADAPTER *pUartAdapter,
+                    u8  *pRxData, u32 Length, u32 TimeoutMS);
+u32 HalLogUartSend(HAL_LOG_UART_ADAPTER *pUartAdapter,
+        u8 *pTxData, u32 Length, u32 TimeoutMS);
+HAL_Status HalLogUartIntSend(HAL_LOG_UART_ADAPTER *pUartAdapter,
+        u8 *pTxData, u32 Length);
+HAL_Status HalLogUartIntRecv(HAL_LOG_UART_ADAPTER *pUartAdapter,
+        u8  *pRxData, u32 Length);
+VOID HalLogUartAbortIntSend(HAL_LOG_UART_ADAPTER *pUartAdapter);
+VOID HalLogUartAbortIntRecv(HAL_LOG_UART_ADAPTER *pUartAdapter);
+HAL_Status HalLogUartRstFIFO(HAL_LOG_UART_ADAPTER *pUartAdapter, u8 RstCtrl);
+VOID HalLogUartEnable(HAL_LOG_UART_ADAPTER *pUartAdapter);
+VOID HalLogUartDisable(HAL_LOG_UART_ADAPTER *pUartAdapter);
+ */
+extern VOID UartLogIrqHandleRam(VOID * Data);
+// extern DiagPrintf();
+// extern HalGetCpuClk(void);
+// extern VectorIrqUnRegisterRtl8195A();
+// extern VectorIrqRegisterRtl8195A();
+// extern VectorIrqEnRtl8195A();
+// extern RuartIsTimeout();
+// extern HalDelayUs();
+// extern HalPinCtrlRtl8195A();
+// extern HalLogUartInit();
+//-------------------------------------------------------------------------
+// Data declarations
+// extern ConfigDebugWarn;
+// extern ConfigDebugErr;
+// extern HalTimerOp;
+// extern ConfigDebugInfo;
+// extern UartLogIrqHandleRam;
+//-------------------------------------------------------------------------
+/*
+ *  16 bytes FIFO ... 16*11/38400 = 0.004583 sec
+ *  (0.005/5)*166666666 = 166666.666
+ */
+VOID HalLogUartWaitTxFifoEmpty(VOID) {
+	int x = 16384;
+	while((!(HAL_READ8(LOG_UART_REG_BASE, 0x14) & BIT6)) && x--);
+}
+
+//----- HalLogUartIrqRxRdyHandle
+void HalLogUartIrqRxRdyHandle(HAL_LOG_UART_ADAPTER *pUartAdapter) {
+	volatile uint8_t *pRxBuf = pUartAdapter->pRxBuf;
+	if (pRxBuf != NULL) {
+		while (pUartAdapter->RxCount) {
+			if (!(HAL_UART_READ32(UART_INTERRUPT_EN_REG_OFF) & 1)) // v40003014
+			{
+				if (pUartAdapter->RxCount <= 7) {
+					pUartAdapter->FIFOControl = pUartAdapter->FIFOControl
+							& (~(FCR_RX_TRIG_MASK)); // & 0xFFFFFF3F;
+					HAL_UART_WRITE32(UART_FIFO_CTL_REG_OFF,
+							pUartAdapter->FIFOControl); // 40003008
+				}
+				break;
+			}
+			*pRxBuf++ = HAL_UART_READ32(UART_REV_BUF_OFF); // 40003000;
+			--pUartAdapter->RxCount;
+		}
+		if (!pUartAdapter->RxCount) {
+			pUartAdapter->IntEnReg = pUartAdapter->IntEnReg
+					& (~(IER_ERBFI | IER_ELSI)); // & 0xFFFFFFFA;
+			HAL_UART_WRITE32(UART_INTERRUPT_EN_REG_OFF, pUartAdapter->IntEnReg); // 40003004
+			if (pUartAdapter->pRxBuf != pRxBuf) {
+				if (pUartAdapter->RxCompCallback)
+					pUartAdapter->RxCompCallback(pUartAdapter->RxCompCbPara);
+			}
+			if (pUartAdapter->FIFOControl & FCR_RX_TRIG_MASK) // 0xC0
+					{
+				pUartAdapter->FIFOControl = pUartAdapter->FIFOControl
+						& (~(FCR_RX_TRIG_MASK)); // & 0xFFFFFF3F;
+				HAL_UART_WRITE32(UART_FIFO_CTL_REG_OFF,
+						pUartAdapter->FIFOControl); // 40003008
+			}
+		}
+		pUartAdapter->pRxBuf = pRxBuf;
+	} else
+		DBG_UART_WARN("HalLogUartIrqRxDataHandle: No RX Buffer\n");
+}
+
+//----- HalLogUartIrqHandle
+void HalLogUartIrqHandle(VOID * Data) {
+  PHAL_LOG_UART_ADAPTER pUartAdapter = (PHAL_LOG_UART_ADAPTER) Data;
+  u32 iir = HAL_UART_READ32(UART_INTERRUPT_IDEN_REG_OFF) & 0x0F; // v40003008 & 0xF;
+  switch(iir) {
+	case IIR_MODEM_STATUS: // Clear to send or data set ready or ring indicator or data carrier detect.
+		break;
+	case IIR_NO_PENDING:
+		return;
+	case IIR_THR_EMPTY: // TX FIFO level lower than threshold or FIFO empty
+	{
+		volatile u8 * pTxBuf = pUartAdapter->pTxBuf;
+		if (pTxBuf != NULL) {
+			while (pUartAdapter->TxCount) {
+				if (!(HAL_UART_READ32(UART_LINE_STATUS_REG_OFF) & LSR_THRE)) { // v40003014 & 0x20 // Transmit Holding Register Empty bit(IER_PTIME=0)
+					HAL_UART_WRITE32(UART_REV_BUF_OFF, *pTxBuf++);
+					pUartAdapter->TxCount--; // *((_DWORD *)v1 + 4);
+				}
+			}
+			pUartAdapter->pTxBuf = pTxBuf;
+			if (!(pUartAdapter->TxCount)) {
+				pUartAdapter->IntEnReg = pUartAdapter->IntEnReg & (~IER_PTIME); // & 0xFFFFFF7F
+				HAL_UART_WRITE32(UART_INTERRUPT_EN_REG_OFF,
+						pUartAdapter->IntEnReg); // 40003004
+				if (HAL_UART_READ32(UART_LINE_STATUS_REG_OFF) & LSR_THRE) { // 40003014 & 0x20 )
+					pUartAdapter->IntEnReg = pUartAdapter->IntEnReg
+							& (~IER_ETBEI); // & 0xFFFFFFFD
+					HAL_UART_WRITE32(UART_INTERRUPT_EN_REG_OFF,
+							pUartAdapter->IntEnReg); // 40003004
+					if (pUartAdapter->TxCompCallback != NULL)
+						pUartAdapter->TxCompCallback(
+								pUartAdapter->TxCompCbPara);
+				}
+			}
+		} else {
+			pUartAdapter->IntEnReg = pUartAdapter->IntEnReg & (~IER_ETBEI); // & 0xFFFFFFFD
+			HAL_UART_WRITE32(UART_INTERRUPT_EN_REG_OFF, pUartAdapter->IntEnReg); // 40003004
+		}
+	}
+		break;
+	case IIR_RX_RDY:     // RX data ready
+	case IIR_CHAR_TIMEOUT:  // timeout: Rx dara ready but no read
+		HalLogUartIrqRxRdyHandle(pUartAdapter); // (HAL_LOG_UART_ADAPTER *)
+		break;
+	case IIR_RX_LINE_STATUS: // Overrun/parity/framing errors or break interrupt
+		pUartAdapter->LineStatus = HAL_UART_READ32(UART_LINE_STATUS_REG_OFF); //  *((_BYTE *)v1 + 15) = v40003014; // LineStatusCallback
+		if (pUartAdapter->LineStatusCallback != NULL)
+			pUartAdapter->LineStatusCallback(pUartAdapter->LineStatusCbPara, pUartAdapter->LineStatus); // v3(*((_DWORD *)v1 + 17)); RxCompCallback
+		break;
+	case IIR_BUSY:
+		break;
+	default:
+		DBG_UART_WARN("HalLogUartIrqHandle: UnKnown Interrupt ID!\n");
+		break;
+	}
+	if (pUartAdapter->api_irq_handler)
+		pUartAdapter->api_irq_handler(pUartAdapter->api_irq_id, iir);
+}
+
+//----- HalLogUartSetBaudRate
+void HalLogUartSetBaudRate(HAL_LOG_UART_ADAPTER *pUartAdapter) {
+	u32 clk4 = HalGetCpuClk() >> 2; // PLATFORM_CLOCK/2; // (unsigned int) HalGetCpuClk() >> 2; // div 4
+	if (pUartAdapter->BaudRate == 0)
+		pUartAdapter->BaudRate = DEFAULT_BAUDRATE;
+	u32 br16 = pUartAdapter->BaudRate << 4; // * 16
+	if ((br16 != 0) && (br16 <= clk4)) {
+		unsigned int dll = clk4 / br16;
+		if ((((10 * clk4) / br16) - (10 * dll)) > 4)
+			dll++;
+		HAL_UART_WRITE32(UART_LINE_CTL_REG_OFF,
+				HAL_UART_READ32(UART_LINE_CTL_REG_OFF) | LCR_DLAB);
+		HAL_UART_WRITE32(UART_DLL_OFF, dll);
+		HAL_UART_WRITE32(UART_DLH_OFF, dll >> 8);
+		HAL_UART_WRITE32(UART_LINE_CTL_REG_OFF,
+				HAL_UART_READ32(UART_LINE_CTL_REG_OFF) & (~LCR_DLAB));
+	} else
+		DBG_UART_ERR("Cannot support Baud Sample Rate which bigger than Serial Clk!\n");
+}
+
+//----- HalLogUartSetLineCtrl
+void HalLogUartSetLineCtrl(HAL_LOG_UART_ADAPTER *pUartAdapter) {
+	HAL_UART_WRITE32(UART_LINE_CTL_REG_OFF,
+			pUartAdapter->Stop | pUartAdapter->Parity
+					| pUartAdapter->DataLength);
+}
+
+//----- HalLogUartSetIntEn
+void HalLogUartSetIntEn(HAL_LOG_UART_ADAPTER *pUartAdapter) {
+	HAL_UART_WRITE32(UART_INTERRUPT_EN_REG_OFF, pUartAdapter->IntEnReg);
+}
+
+//----- HalLogUartInitSetting
+u32 HalLogUartInitSetting(HAL_LOG_UART_ADAPTER *pUartAdapter) {
+	HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN,
+			HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) & (~BIT_SOC_LOG_UART_EN)); // 40000210 &= 0xFFFFEFFF;
+	HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN,
+			HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) | BIT_SOC_LOG_UART_EN); // 40000210 |= 0x1000;
+	HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL,
+			HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) | BIT_SOC_ACTCK_LOG_UART_EN); // 40000230 |= 0x1000;
+//  HalPinCtrlRtl8195A(LOG_UART, 0, 1); ????
+	u32 clk4 = HalGetCpuClk() >> 2; // PLATFORM_CLOCK/2; // (unsigned int) HalGetCpuClk() >> 2; // div 4
+	if (pUartAdapter->BaudRate == 0)
+		pUartAdapter->BaudRate = DEFAULT_BAUDRATE;
+	u32 br16 = pUartAdapter->BaudRate << 4; // * 16
+	HAL_UART_WRITE32(UART_INTERRUPT_EN_REG_OFF, 0); // 40003004 = 0;
+	if (br16 <= clk4) {
+		u32 dll = clk4 / br16;
+		if ((((10 * clk4) / br16) - (10 * dll)) > 4)
+			dll++;
+		HAL_UART_WRITE32(UART_LINE_CTL_REG_OFF, LCR_DLAB); // 4000300C = 128;
+		HAL_UART_WRITE32(UART_DLL_OFF, dll); // v40003000 =
+		HAL_UART_WRITE32(UART_DLH_OFF, dll >> 8); // v40003004 =
+		HAL_UART_WRITE32(UART_LINE_CTL_REG_OFF, 0);
+	}
+	HAL_UART_WRITE32(UART_LINE_CTL_REG_OFF,
+			pUartAdapter->Parity | pUartAdapter->Stop
+					| pUartAdapter->DataLength); // 4000300C =
+	HAL_UART_WRITE32(UART_FIFO_CTL_REG_OFF, pUartAdapter->FIFOControl);
+	HAL_UART_WRITE32(UART_INTERRUPT_EN_REG_OFF, pUartAdapter->IntEnReg);
+
+	pUartAdapter->IrqHandle.IrqNum = UART_LOG_IRQ;
+	pUartAdapter->IrqHandle.Data = (u32)pUartAdapter;
+	pUartAdapter->IrqHandle.IrqFun = HalLogUartIrqHandle;
+	pUartAdapter->IrqHandle.Priority = 14;
+	VectorIrqUnRegisterRtl8195A(&pUartAdapter->IrqHandle);
+	VectorIrqRegisterRtl8195A(&pUartAdapter->IrqHandle);
+	VectorIrqEnRtl8195A(&pUartAdapter->IrqHandle);
+	return 0;
+}
+
+//----- HalLogUartRecv
+u32 HalLogUartRecv(HAL_LOG_UART_ADAPTER *pUartAdapter, u8 *pRxData, u32 Length, u32 TimeoutMS) {
+	u32 result, i, timecnt, timeout; // v4 , v10
+	volatile u8 LineStatus;
+
+	if ((pRxData != NULL) && Length) {
+		if (TimeoutMS - 1 > 0xFFFFFFFD)
+			timeout = 0;
+		else {
+			timeout = 1000 * TimeoutMS / 0x1F;
+			timecnt = HalTimerOp.HalTimerReadCount(1);
+		}
+		i = 0;
+		while (i < Length) {
+			LineStatus = HAL_UART_READ32(UART_LINE_STATUS_REG_OFF);
+			if (LineStatus & LSR_DR) {
+				pRxData[i++] = HAL_UART_READ32(UART_REV_BUF_OFF);
+			} else if (timeout) {
+				if (RuartIsTimeout(timecnt, timeout) == HAL_TIMEOUT) {
+					DBG_UART_INFO("HalLogUartRecv: Rx Timeout, RxCount=%d\n",
+							timecnt, timeout);
+					break;
+				}
+			} else if (!TimeoutMS)
+				break;
+		}
+		result = i;
+		pUartAdapter->LineStatus = LineStatus;
+	} else {
+		DBG_UART_ERR("HalLogUartRecv: Err: pRxData=0x%x,  Length=%d!\n",
+				pRxData, Length);
+		result = 0;
+	}
+	return result;
+}
+
+//----- HalLogUartSend
+u32 HalLogUartSend(HAL_LOG_UART_ADAPTER *pUartAdapter,
+        u8 *pTxData, u32 Length, u32 TimeoutMS) {
+	u32 i, result, timeout, timecnt;
+
+	if ((pTxData != NULL) && Length) {
+		if (TimeoutMS - 1 > 0xFFFFFFFD) {
+			timeout = 0;
+		} else {
+			timeout = 1000 * TimeoutMS / 0x1F;
+			timecnt = HalTimerOp.HalTimerReadCount(1); //  v4 = (*((int (__fastcall **)(_DWORD))&HalTimerOp + 2))(1);
+		}
+		i = 0;
+		while (i < Length) {
+			if (HAL_UART_READ32(UART_LINE_STATUS_REG_OFF) & LSR_THRE) { //  v40003014 & 0x20 )
+				HAL_UART_WRITE32(UART_REV_BUF_OFF, pTxData[i++]); // 40003000 = pTxData[i++];
+			} else if (timeout) {
+				if (RuartIsTimeout(timecnt, timeout) == HAL_TIMEOUT) {
+					DBG_UART_INFO("HalLogUartSend: Tx Timeout, TxCount=%d\n",
+							timecnt, timeout);
+					break;
+				}
+			} else if (!TimeoutMS)
+				break;
+		}
+		if (i == Length)
+			while (!(HAL_UART_READ32(UART_LINE_STATUS_REG_OFF) & LSR_TEMT)
+					&& (!timeout
+							|| RuartIsTimeout(timecnt, timeout) != HAL_TIMEOUT))
+				; // 40003014 & 0x40
+		result = i;
+	} else {
+		DBG_UART_ERR("HalLogUartSend: Err: pTxData=0x%x,  Length=%d!\n",
+				pTxData, Length);
+		result = 0;
+	}
+	return result;
+}
+
+//----- HalLogUartIntSend
+HAL_Status HalLogUartIntSend(HAL_LOG_UART_ADAPTER *pUartAdapter,
+        u8 *pTxData, u32 Length) {
+	HAL_Status result;
+	if (pTxData && Length) {
+		pUartAdapter->TxCount = Length;
+		pUartAdapter->pTxBuf = pTxData;
+		pUartAdapter->pTxStartAddr = pTxData;
+		pUartAdapter->IntEnReg = pUartAdapter->IntEnReg
+				| (IER_PTIME | IER_ETBEI); // | 0x82;
+		HAL_UART_WRITE32(UART_INTERRUPT_EN_REG_OFF, pUartAdapter->IntEnReg); // 40003004
+		result = HAL_OK; // 0;
+	} else {
+		DBG_UART_ERR("HalLogUartIntSend: Err: pTxData=0x%x, Length=%d!\n",
+				pTxData, Length);
+		result = HAL_ERR_PARA; //3;
+	}
+	return result;
+}
+
+//----- HalLogUartIntRecv
+HAL_Status HalLogUartIntRecv(HAL_LOG_UART_ADAPTER *pUartAdapter,
+        u8  *pRxData, u32 Length) {
+	HAL_Status result;
+
+	if (pRxData && Length) {
+		pUartAdapter->pRxBuf = pRxData;
+		pUartAdapter->pRxStartAddr = pRxData;
+		pUartAdapter->RxCount = Length;
+		if (Length > 8) {
+			pUartAdapter->FIFOControl = pUartAdapter->FIFOControl
+					| FCR_RX_TRIG_HF; // | 0x80 RCVR Trigger: FIFO 1/2 full
+			HAL_UART_WRITE32(UART_FIFO_CTL_REG_OFF, pUartAdapter->FIFOControl); // 40003008
+		}
+		pUartAdapter->IntEnReg = pUartAdapter->IntEnReg
+				| (IER_ERBFI | IER_ELSI); // | 5
+		HAL_UART_WRITE32(UART_INTERRUPT_EN_REG_OFF, pUartAdapter->IntEnReg); // 40003004
+		result = HAL_OK;
+	} else {
+		DBG_UART_ERR("HalLogUartIntRecv: Err: pRxData=0x%x, Length=%d\n",
+				pRxData, Length);
+		result = HAL_ERR_PARA; // 3;
+	}
+	return result;
+}
+
+//----- HalLogUartAbortIntSend
+void HalLogUartAbortIntSend(HAL_LOG_UART_ADAPTER *pUartAdapter) {
+	pUartAdapter->IntEnReg = pUartAdapter->IntEnReg
+			& (~(IER_PTIME | IER_ETBEI)); // & 0xFFFFFF7D
+	HAL_UART_WRITE32(UART_INTERRUPT_EN_REG_OFF, pUartAdapter->IntEnReg); // 40003004
+}
+
+//----- HalLogUartAbortIntRecv
+void HalLogUartAbortIntRecv(HAL_LOG_UART_ADAPTER *pUartAdapter) {
+	pUartAdapter->IntEnReg = pUartAdapter->IntEnReg & (~(IER_ERBFI | IER_ELSI)); // & 0xFFFFFFFA
+	HAL_UART_WRITE32(UART_INTERRUPT_EN_REG_OFF, pUartAdapter->IntEnReg); // 40003004
+	while (pUartAdapter->RxCount
+			&& (HAL_UART_READ32(UART_LINE_STATUS_REG_OFF) & LSR_DR)) {
+		*pUartAdapter->pRxBuf++ = HAL_UART_READ32(UART_REV_BUF_OFF); // 40003000
+		pUartAdapter->RxCount--;
+	}
+}
+
+//----- HalLogUartRstFIFO
+HAL_Status HalLogUartRstFIFO(HAL_LOG_UART_ADAPTER *pUartAdapter, u8 RstCtrl) {
+	u32 RegValue = pUartAdapter->FIFOControl;
+	if (RstCtrl & LOG_UART_RST_TX_FIFO)
+		RegValue |= FCR_RST_TX;
+	if (RstCtrl & LOG_UART_RST_RX_FIFO)
+		RegValue |= FCR_RST_RX;
+	HAL_UART_WRITE32(UART_FIFO_CTL_REG_OFF, RegValue); // 40003008 = RegValue;
+	if (RstCtrl & LOG_UART_RST_TX_FIFO) {
+		int i = 100;
+		for (RegValue = HAL_UART_READ32(UART_LINE_STATUS_REG_OFF);
+				!(RegValue & LSR_TEMT);
+				HAL_UART_WRITE32(UART_LINE_STATUS_REG_OFF, RegValue)) {
+			if (!(i--))
+				break;
+			HalDelayUs(100);
+		}
+	}
+	return HAL_OK;
+}
+
+//----- HalLogUartEnable
+void HalLogUartEnable(HAL_LOG_UART_ADAPTER *pUartAdapter) {
+	HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN,
+			HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) | BIT_SOC_LOG_UART_EN); // 40000210 |= 0x1000u;
+	HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL,
+			HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) | BIT_SOC_ACTCK_LOG_UART_EN); // 40000230 |= 0x1000u;
+	HalPinCtrlRtl8195A(LOG_UART, 0, 1);
+}
+
+//----- HalLogUartDisable
+void HalLogUartDisable(HAL_LOG_UART_ADAPTER *pUartAdapter) {
+	HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN,
+			HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) & (~BIT_SOC_LOG_UART_EN)); // 40000210 &= 0xFFFFEFFF;
+	HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL,
+			HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) & (~BIT_SOC_ACTCK_LOG_UART_EN)); // 40000230 &= 0xFFFFEFFF;
+	HalPinCtrlRtl8195A(LOG_UART, 0, 0);
+}
+
+//----- HalInitLogUart
+void HalInitLogUart(void) {
+	IRQ_HANDLE UartIrqHandle;
+	LOG_UART_ADAPTER UartAdapter;
+
+	HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN,
+			HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) & (~BIT_SOC_LOG_UART_EN)); // 40000210 &= 0xFFFFEFFF;
+	HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN,
+			HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) | BIT_SOC_LOG_UART_EN);
+	HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL,
+			HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) | BIT_SOC_ACTCK_LOG_UART_EN); // 40000230 |= 0x1000u;
+	HalPinCtrlRtl8195A(LOG_UART, 0, 1);
+	UartAdapter.BaudRate = DEFAULT_BAUDRATE;
+	UartAdapter.DataLength = UART_DATA_LEN_8BIT;
+	UartAdapter.FIFOControl = FCR_RX_TRIG_MASK | FCR_FIFO_EN; // 0xC1;
+	UartAdapter.IntEnReg = IER_ERBFI | IER_ELSI; // 5
+	UartAdapter.Parity = LCR_PARITY_NONE;
+	UartAdapter.Stop = LCR_STOP_1B;
+	HalLogUartInit(UartAdapter);
+	UartIrqHandle.IrqNum = UART_LOG_IRQ;
+	UartIrqHandle.IrqFun = (IRQ_FUN) &UartLogIrqHandleRam;
+	UartIrqHandle.Data = 0;
+	UartIrqHandle.Priority = 0;
+	VectorIrqUnRegisterRtl8195A(&UartIrqHandle);
+	VectorIrqRegisterRtl8195A(&UartIrqHandle);
+}
+
+//----- HalDeinitLogUart
+void HalDeinitLogUart(void) {
+	HalLogUartWaitTxFifoEmpty();
+	HalPinCtrlRtl8195A(LOG_UART, 0, 0);
+}
+
+#endif // CONFIG_LOG_UART_EN
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_mii.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_mii.c
@ -0,0 +1,134 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#include "rtl8195a.h"
+
+#ifdef CONFIG_MII_EN
+
+#include "hal_mii.h"
+
+HAL_ETHER_ADAPTER HalEtherAdp;
+
+
+
+s32
+HalMiiInit(
+	IN VOID
+)
+{
+	if (FunctionChk(MII, S0) == _FALSE)
+		return HAL_ERR_UNKNOWN;
+	else
+		return HalMiiInitRtl8195a();
+}
+
+
+VOID
+HalMiiDeInit(
+	IN VOID
+)
+{
+	HalMiiDeInitRtl8195a();
+}
+
+
+s32
+HalMiiWriteData(
+	IN const char *Data,
+	IN u32 Size
+)
+{
+	return HalMiiWriteDataRtl8195a(Data, Size);
+}
+
+
+u32
+HalMiiSendPacket(
+	IN VOID
+)
+{
+	return HalMiiSendPacketRtl8195a();
+}
+
+
+u32
+HalMiiReceivePacket(
+	IN VOID
+)
+{
+	return HalMiiReceivePacketRtl8195a();
+}
+
+
+u32
+HalMiiReadData(
+	IN u8 *Data,
+	IN u32 Size
+)
+{
+	return HalMiiReadDataRtl8195a(Data, Size);
+}
+
+
+VOID
+HalMiiGetMacAddress(
+	IN u8 *Addr
+)
+{
+	HalMiiGetMacAddressRtl8195a(Addr);
+}
+
+
+u32
+HalMiiGetLinkStatus(
+	IN VOID
+)
+{
+	return HalMiiGetLinkStatusRtl8195a();
+}
+
+
+VOID
+HalMiiForceLink(
+	IN s32 Speed,
+	IN s32 Duplex
+)
+{
+	HalMiiForceLinkRtl8195a(Speed, Duplex);
+}
+
+
+#ifdef CONFIG_MII_VERIFY
+VOID
+HalMiiOpInit(
+    IN VOID *Data
+)
+{
+    PHAL_MII_OP pHalMiiOp = (PHAL_MII_OP) Data;
+
+
+    pHalMiiOp->HalMiiGmacInit          = HalMiiGmacInitRtl8195a;
+    pHalMiiOp->HalMiiGmacReset         = HalMiiGmacResetRtl8195a;
+    pHalMiiOp->HalMiiGmacEnablePhyMode = HalMiiGmacEnablePhyModeRtl8195a;
+    pHalMiiOp->HalMiiGmacXmit          = HalMiiGmacXmitRtl8195a;
+    pHalMiiOp->HalMiiGmacCleanTxRing   = HalMiiGmacCleanTxRingRtl8195a;
+    pHalMiiOp->HalMiiGmacFillTxInfo    = HalMiiGmacFillTxInfoRtl8195a;
+    pHalMiiOp->HalMiiGmacFillRxInfo    = HalMiiGmacFillRxInfoRtl8195a;
+    pHalMiiOp->HalMiiGmacTx            = HalMiiGmacTxRtl8195a;
+    pHalMiiOp->HalMiiGmacRx            = HalMiiGmacRxRtl8195a;
+    pHalMiiOp->HalMiiGmacSetDefaultEthIoCmd   = HalMiiGmacSetDefaultEthIoCmdRtl8195a;
+    pHalMiiOp->HalMiiGmacInitIrq       = HalMiiGmacInitIrqRtl8195a;
+    pHalMiiOp->HalMiiGmacGetInterruptStatus   = HalMiiGmacGetInterruptStatusRtl8195a;
+    pHalMiiOp->HalMiiGmacClearInterruptStatus = HalMiiGmacClearInterruptStatusRtl8195a;
+}
+#endif  // #ifdef CONFIG_MII_VERIFY
+
+#endif  // #ifdef CONFIG_MII_EN
+
+
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_misc.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_misc.c
@ -0,0 +1,69 @@
+/*
+ * hal_misc.c
+ *
+ *  Created on: 08/10/2016
+ *      Author: pvvx
+*/
+#include "rtl8195a.h"
+
+//-------------------------------------------------------------------------
+// Function declarations
+/*
+void HalReInitPlatformTimer(void);
+void HalSetResetCause(IN HAL_RESET_REASON reason);
+HAL_RESET_REASON HalGetResetCause(void);
+*/
+// void HalTimerOpInit_Patch(IN void *Data); // in hal_timer.h 
+//-------------------------------------------------------------------------
+// Data declarations
+// extern HAL_TIMER_OP HalTimerOp; // This variable declared in ROM code (in hal_timer.h )
+
+
+//----- HalReInitPlatformTimer
+void HalReInitPlatformTimer(void)
+{
+  TIMER_ADAPTER TimerAdapter;
+  HAL_PERI_ON_WRITE32(REG_OSC32K_CTRL, HAL_PERI_ON_READ32(REG_OSC32K_CTRL) | BIT_32K_POW_CKGEN_EN); // 40000270 |= 1
+  HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN, HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) | BIT_SOC_GTIMER_EN); // 40000210 |= 0x10000
+  HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL, HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) | BIT_SOC_ACTCK_TIMER_EN); // 40000230 |= 0x4000
+  HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL, HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) | BIT_SOC_SLPCK_TIMER_EN); // 40000230 |= 0x8000
+  HAL_PERI_ON_WRITE32(REG_PON_ISO_CTRL, HAL_PERI_ON_READ32(REG_PON_ISO_CTRL) & (~BIT_ISO_OSC32K_EN)); // 40000204 &= 0xFFFFFFEF
+  TimerAdapter.TimerIrqPriority = 0;
+  TimerAdapter.TimerLoadValueUs = 0;
+  TimerAdapter.TimerMode = FREE_RUN_MODE;
+  TimerAdapter.IrqDis = 1;
+  TimerAdapter.TimerId = 1;
+  HalTimerOpInit_Patch(&HalTimerOp);
+  HAL_TIMER_OP x;
+  HalTimerOp.HalTimerInit(&TimerAdapter);
+  HalTimerOp.HalTimerEn(1);
+}
+
+//----- HalSetResetCause
+void HalSetResetCause(HAL_RESET_REASON reason)
+{
+	HAL_PERI_ON_WRITE32(REG_SYS_DSLP_TIM_CTRL, HAL_PERI_ON_READ32(REG_SYS_DSLP_TIM_CTRL) | BIT31); // 40000094 |= 0x80000000
+	HAL_PERI_ON_WRITE32(REG_SYS_DSLP_TIM_CTRL, (HAL_PERI_ON_READ32(REG_SYS_DSLP_TIM_CTRL) & 0xffff0000) | 0x9700 | (reason & 0xff)); // 40000094 = (40000094 >> 16 << 16) | 0x9700 | (u8)reason;
+    while(HAL_PERI_ON_READ32(REG_SYS_DSLP_TIM_CTRL) &  0x8000);
+}
+
+//----- HalGetResetCause
+HAL_RESET_REASON HalGetResetCause(void)
+{
+	HAL_PERI_ON_WRITE32(REG_SYS_DSLP_TIM_CTRL, HAL_PERI_ON_READ32(REG_SYS_DSLP_TIM_CTRL) | BIT31); // 40000094 |= 0x80000000
+	HAL_PERI_ON_WRITE32(REG_SYS_DSLP_TIM_CTRL, (HAL_PERI_ON_READ32(REG_SYS_DSLP_TIM_CTRL) & 0xFFFF00FF) | 0x8700); // 40000094 = 40000094 & 0xFFFF00FF | 0x8700
+	while(HAL_PERI_ON_READ32(REG_SYS_DSLP_TIM_CTRL) &  0x8000);
+	return HAL_PERI_ON_READ32(REG_SYS_DSLP_TIM_CTRL);
+}
+
+u8 HalGetChipId(void) {
+	u8 chip_id = CHIP_ID_8195AM;
+#if CONFIG_DEBUG_LOG > 3
+	if (HALEFUSEOneByteReadROM(HAL_SYS_CTRL_READ32(REG_SYS_EFUSE_CTRL), 0xF8, &chip_id, L25EOUTVOLTAGE) != 1)
+		DBG_MISC_INFO("Get Chip ID Failed\r");
+#else
+	HALEFUSEOneByteReadROM(HAL_SYS_CTRL_READ32(REG_SYS_EFUSE_CTRL), 0xF8, &chip_id, L25EOUTVOLTAGE);
+#endif
+	return chip_id;
+}
+
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_nfc.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_nfc.c
@ -0,0 +1,23 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "rtl8195a.h"
+#include "hal_nfc.h"
+
+#ifdef CONFIG_NFC_EN
+
+VOID HalNFCOpInit(
+    IN  VOID *Data
+)
+{
+
+}
+
+#endif //CONFIG_NFC_EN
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_pcm.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_pcm.c
@ -0,0 +1,31 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "platform_autoconf.h"
+#include "hal_pcm.h"
+
+#ifdef CONFIG_PCM_EN
+
+VOID HalPcmOpInit(
+    IN  VOID *Data
+)
+{
+    PHAL_PCM_OP pHalPcmOp = (PHAL_PCM_OP) Data;
+
+    pHalPcmOp->HalPcmOnOff = HalPcmOnOffRtl8195a;
+    pHalPcmOp->HalPcmInit = HalPcmInitRtl8195a;
+    pHalPcmOp->HalPcmSetting = HalPcmSettingRtl8195a;
+    pHalPcmOp->HalPcmEn = HalPcmEnRtl8195a;
+    pHalPcmOp->HalPcmIsrEnAndDis= HalPcmIsrEnAndDisRtl8195a;
+    pHalPcmOp->HalPcmDumpReg= HalPcmDumpRegRtl8195a;
+    pHalPcmOp->HalPcm= HalPcmRtl8195a;
+}
+
+#endif //CONFIG_PCM_EN
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_pinmux.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_pinmux.c
@ -0,0 +1,140 @@
+/*
+ * hal_pinmux.c
+ *
+ *  Created on: 08/10/2016
+ *      Author: pvvx
+*/
+#include "rtl8195a.h"
+
+//-------------------------------------------------------------------------
+// Function declarations
+/*
+u8 GpioFunctionChk(IN u32  chip_pin, IN u8 Operation);
+u32 GpioIcFunChk(IN u32 chip_pin, IN u8 Operation);
+u8 FunctionChk(IN u32 Function, IN u32 PinLocation);
+u8 RTL8710afFunChk(IN u32 Function, IN u32 PinLocation);
+void HalJtagPinOff();
+*/
+// extern _LONG_CALL_ u8 HalPinCtrlRtl8195A(IN u32  Function, IN u32  PinLocation, IN BOOL   Operation);
+// extern HALEFUSEOneByteReadRAM();
+//-------------------------------------------------------------------------
+// Data declarations
+extern u16 GPIOState[];
+#define REG_EFUSE_0xF8 0xF8 // [0xF8] = 0xFC RTL8710AF
+
+#define RTL8710_DEF_PIN_ON 0
+
+//----- HalJtagPinOff
+void HalJtagPinOff(void)
+{
+	HalPinCtrlRtl8195A(JTAG, 0, 0);
+}
+
+
+#if RTL8710_DEF_PIN_ON
+
+//----- GpioIcFunChk
+u8 GpioIcFunChk(IN u32 chip_pin, IN u8 Operation)
+{
+  u8 tst, result;
+  HALEFUSEOneByteReadRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), REG_EFUSE_0xF8, &tst, L25EOUTVOLTAGE);
+
+  tst += 8; // tst = 0xfc+8 = 0x04
+  if ( tst > 7 ) result = 0;
+  else {
+	  tst = 1 << tst;  // v6 = 0x10
+	  if (tst & 0xEF) result = 1;
+	  else {
+		  result = tst & 0x10;
+	      if(result) { // RTL8710AF ?
+	          if (chip_pin - 1 <= 2) result = 0; // PA_1, PA_2, PA_3
+	          else {
+	            result = chip_pin - PC_5;  // PC_5
+	            if (chip_pin != PC_5)
+	              result = 1;
+	          }
+	      }
+	  }
+  }
+  return result;
+}
+
+#endif // RTL8710_DEF_PIN_ON
+
+//----- GpioFunctionChk
+u8 GpioFunctionChk(IN u32 chip_pin, IN u8 Operation)
+{
+  u8 result;
+  u16 tst;
+
+#if RTL8710_DEF_PIN_ON
+  result = GpioIcFunChk(chip_pin, Operation);
+#else
+  result = 1;
+#endif
+  if(result) {
+    result = 1;
+    tst = 1 << (chip_pin & 0xF);
+    if (!Operation) {
+      tst = GPIOState[chip_pin >> 4] & (~tst);
+      GPIOState[chip_pin >> 4] = tst;
+      return result;
+    }
+    if (!(GPIOState[chip_pin >> 4] & tst)) {
+      tst |= GPIOState[chip_pin >> 4];
+      GPIOState[chip_pin >> 4] = tst;
+      return result;
+    }
+    result = 0;
+  }
+  return result;
+}
+
+#if RTL8710_DEF_PIN_ON
+//----- RTL8710afFunChk
+u8 RTL8710afFunChk(IN u32 Function, IN u32  PinLocation)
+{
+  u8 result;
+  if (Function == SPI0_MCS) //  SPI0_MCS
+    return PinLocation - 1 + (PinLocation - 1 <= 0) - (PinLocation - 1);
+  if (Function > I2C0) {
+    if (Function == I2S1) goto LABEL_15;
+    if(Function > I2S1) {
+    	if(Function == JTAG || Function == LOG_UART) return 1;
+    }
+    else if(Function == I2C3) goto LABEL_15;
+    return 0;
+  }
+  if(Function == UART2) goto LABEL_15;
+  if(Function == SPI0)
+    return PinLocation - 1 + (PinLocation - 1 <= 0) - (PinLocation - 1);
+  if (Function != UART0) return 0;
+LABEL_15:
+  result = 1 - PinLocation;
+  if (PinLocation > 1) result = 0;
+  return result;
+}
+#endif // RTL8710_DEF_PIN_ON
+
+//----- FunctionChk
+u8 FunctionChk( IN u32  Function, IN u32 PinLocation)
+{
+#if RTL8710_DEF_PIN_ON
+  u8 result, tst;
+  HALEFUSEOneByteReadRAM(HAL_READ32(SYSTEM_CTRL_BASE, REG_SYS_EFUSE_CTRL), REG_EFUSE_0xF8, &tst, L25EOUTVOLTAGE);
+  tst += 8; // tst = 0xfc+8 = 0x04
+  if ( tst > 7 ) result = 0;
+  else {
+	tst = 1 << tst;  // v6 = 0x10
+    if (tst & 0xEF) result = 1;
+    else {
+      result = tst & 0x10;
+      if (tst & 0x10)
+        result = RTL8710afFunChk(Function, PinLocation);
+    }
+  }
+  return result;
+#else
+  return 1;
+#endif // RTL8710_DEF_PIN_ON
+}
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_pwm.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_pwm.c
@ -0,0 +1,142 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ * --------------------------
+ *  bug fixing: pvvx
+ */
+ 
+
+#include "rtl8195a.h"
+
+#ifdef CONFIG_PWM_EN
+#include "hal_pwm.h"
+#include "hal_timer.h"
+
+const u8 PWMTimerIdx[MAX_PWM_CTRL_PIN]= {3,4,5,2};  // the G-timer ID used for PWM pin 0~3
+
+/**
+  * @brief  Initializes and enable a PWM control pin.
+  *
+  * @param  pwm_id: the PWM pin index
+  * @param  sel: pin mux selection
+  *
+  * @retval HAL_Status
+  */
+HAL_Status 
+HAL_Pwm_Init(
+    HAL_PWM_ADAPTER *pPwmAdapt,
+    u32 pwm_id,
+    u32 sel
+)
+{
+    u32 timer_id;
+
+    if (NULL == pPwmAdapt) {
+        DBG_PWM_ERR ("HAL_Pwm_Init: NULL adapter\n");
+        return HAL_ERR_PARA;
+    }
+
+    if ((pwm_id >= MAX_PWM_CTRL_PIN) || (sel > 3)) {
+        DBG_PWM_ERR ("HAL_Pwm_Init: Invalid PWM index(%d), sel(%d)\n", pwm_id, sel);
+        return HAL_ERR_PARA;
+    }
+    
+    pPwmAdapt->pwm_id = pwm_id;
+    pPwmAdapt->sel = sel;
+    timer_id = PWMTimerIdx[pwm_id];
+    pPwmAdapt->gtimer_id = timer_id;
+/*
+    if (_FALSE == FunctionChk((pPwmAdapt->pwm_id + PWM0), pPwmAdapt->sel)) {
+    	DBG_PWM_WARN("HAL_Pwm_Init: Warning for RTL8710AF\n");
+	     // return HAL_ERR_HW;
+    }
+*/
+#ifndef CONFIG_CHIP_E_CUT
+    return HAL_Pwm_Init_8195a(pPwmAdapt);
+#else
+    return HAL_Pwm_Init_8195a_V04(pPwmAdapt);
+#endif
+}
+
+
+/**
+  * @brief  Disable a PWM control pin.
+  *
+  * @param  pwm_id: the PWM pin index
+  *
+  * @retval None
+  */
+void 
+HAL_Pwm_Enable(
+    HAL_PWM_ADAPTER *pPwmAdapt
+)
+{
+    if (NULL == pPwmAdapt) {
+        DBG_PWM_ERR ("HAL_Pwm_Enable: NULL adapter\n");
+        return;
+    }
+    
+#ifndef CONFIG_CHIP_E_CUT
+    HAL_Pwm_Enable_8195a(pPwmAdapt);
+#else
+    HAL_Pwm_Enable_8195a_V04(pPwmAdapt);
+#endif
+}
+
+
+/**
+  * @brief  Disable a PWM control pin.
+  *
+  * @param  pwm_id: the PWM pin index
+  *
+  * @retval None
+  */
+void 
+HAL_Pwm_Disable(
+    HAL_PWM_ADAPTER *pPwmAdapt
+)
+{
+    if (NULL == pPwmAdapt) {
+        DBG_PWM_ERR ("HAL_Pwm_Disable: NULL adapter\n");
+        return;
+    }
+    
+#ifndef CONFIG_CHIP_E_CUT
+    HAL_Pwm_Disable_8195a(pPwmAdapt);
+#else
+    HAL_Pwm_Disable_8195a_V04(pPwmAdapt);
+#endif
+}
+
+/**
+  * @brief  Set the duty ratio of the PWM pin.
+  *
+  * @param  pwm_id: the PWM pin index
+  * @param  period: the period time, in micro-second.
+  * @param  pulse_width: the pulse width time, in micro-second.
+  *
+  * @retval None
+  */
+void
+HAL_Pwm_SetDuty(
+    HAL_PWM_ADAPTER *pPwmAdapt,
+    u32 period,
+    u32 pulse_width
+)
+{
+    if (NULL == pPwmAdapt) {
+        DBG_PWM_ERR ("HAL_Pwm_SetDuty: NULL adapter\n");
+        return;
+    }
+    
+#ifndef CONFIG_CHIP_E_CUT
+    HAL_Pwm_SetDuty_8195a(pPwmAdapt, period, pulse_width);
+#else
+    HAL_Pwm_SetDuty_8195a_V04(pPwmAdapt, period, pulse_width);
+#endif
+}
+
+
+#endif  // end of "#ifdef CONFIG_PWM_EN"
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_sdio_host.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_sdio_host.c
@ -0,0 +1,128 @@
+/*
+ * hal_sdio_host.c (disasm hal_sdio_host.o)
+ *
+ * RTL8710/11 pvvx 12/2016
+ */
+#include "rtl8195a.h"
+#ifdef CONFIG_SDIO_HOST_EN
+#include "sd.h"
+#include "sdio_host.h"
+#include "hal_sdio_host.h"
+#include "rtl8195a_sdio_host.h"
+#include "hal_pinmux.h"
+//#ifdef RTL8710AF
+	#include "hal_gpio.h"
+	#include "PinNames.h"
+	#include "hal_gpio.h"
+//#endif
+//-------------------------------------------------------------------------
+// Function declarations
+
+//-------------------------------------------------------------------------
+// Data declarations
+
+//----- HalSdioHostInit(PHAL_SDIO_HOST_ADAPTER)
+HAL_Status HalSdioHostInit(IN VOID *Data) {
+	PHAL_SDIO_HOST_ADAPTER pSdioHostAdapter = (PHAL_SDIO_HOST_ADAPTER) Data;
+	HAL_Status result;
+	if (FunctionChk(SDIOH, 0) != 0) {
+		if (pSdioHostAdapter != NULL) {
+			if (HalSdioHostInitHostRtl8195a(pSdioHostAdapter) != HAL_OK) {
+				result = HAL_ERR_HW;
+			} else {
+				result = HalSdioHostInitCardRtl8195a(pSdioHostAdapter);
+				if (result == HAL_OK) {
+					REG_POWER_STATE RegPwrState;
+					RegPwrState.FuncIdx = SDIOH;
+					RegPwrState.PwrState = ACT;
+					RegPowerState(RegPwrState);
+				}
+			}
+		} else
+			result = HAL_ERR_PARA;
+	} else
+		result = HAL_ERR_UNKNOWN;
+	return result;
+}
+
+//----- HalSdioHostEnable(PHAL_SDIO_HOST_ADAPTER)
+HAL_Status HalSdioHostEnable(void *Data) {
+//	PHAL_SDIO_HOST_ADAPTER pSdioHostAdapter = (PHAL_SDIO_HOST_ADAPTER) Data;
+	HAL_Status result = HalSdioHostEnableRtl8195a(Data);
+	REG_POWER_STATE RegPwrState;
+	RegPwrState.FuncIdx = SDIOH;
+	RegPwrState.PwrState = ACT;
+	if (result == HAL_OK)
+		RegPowerState(RegPwrState);
+	return result;
+}
+
+//----- HalSdioHostDeInit(PHAL_SDIO_HOST_ADAPTER)
+HAL_Status HalSdioHostDeInit(IN VOID *Data) {
+	PHAL_SDIO_HOST_ADAPTER pSdioHostAdapter = (PHAL_SDIO_HOST_ADAPTER) Data;
+	REG_POWER_STATE SdioHostPwrState;
+	u8 HwState;
+	HAL_Status result;
+	SdioHostPwrState.FuncIdx = SDIOH;
+	SdioHostPwrState.PwrState = ACT;
+
+	QueryRegPwrState(SdioHostPwrState.FuncIdx, &SdioHostPwrState.PwrState,
+			&HwState);
+	if (SdioHostPwrState.PwrState & 0xF7) {
+		HalSdioHostEnable(pSdioHostAdapter);
+		QueryRegPwrState(SdioHostPwrState.FuncIdx, &SdioHostPwrState.PwrState,
+				&HwState);
+	}
+	if (SdioHostPwrState.PwrState == ACT) {
+		SdioHostPwrState.PwrState = INACT;
+		RegPowerState(SdioHostPwrState);
+	}
+	if (pSdioHostAdapter != NULL)
+		result = HalSdioHostDeInitRtl8195a(pSdioHostAdapter);
+	else
+		result = HAL_ERR_PARA;
+	return result;
+}
+
+//----- HalSdioHostDisable(PHAL_SDIO_HOST_ADAPTER)
+HAL_Status HalSdioHostDisable(IN VOID *Data) {
+	HAL_Status result = HalSdioHostDisableRtl8195a(Data);
+	if (result == HAL_OK) {
+		REG_POWER_STATE RegPwrState;
+		RegPwrState.FuncIdx = SDIOH;
+		RegPwrState.PwrState = SLPCG;
+		RegPowerState(RegPwrState); // 0x0441
+	}
+	return result;
+}
+
+//----- HalSdioHostOpInit(PHAL_SDIO_HOST_ADAPTER)
+void HalSdioHostOpInit(void *Data) {
+	PHAL_SDIO_HOST_OP phsha = (PHAL_SDIO_HOST_ADAPTER)Data;
+	phsha->HalSdioHostInitHost = &HalSdioHostInitHostRtl8195a;
+	phsha->HalSdioHostInitCard = &HalSdioHostInitCardRtl8195a;
+	phsha->HalSdioHostDeInit = &HalSdioHostDeInitRtl8195a;
+	phsha->HalSdioHostRegIrq = &HalSdioHostIrqInitRtl8195a;
+	phsha->HalSdioHostReadBlocksDma = &HalSdioHostReadBlocksDmaRtl8195a;
+	phsha->HalSdioHostWriteBlocksDma = &HalSdioHostWriteBlocksDmaRtl8195a;
+	phsha->HalSdioHostStopTransfer = &HalSdioHostStopTransferRtl8195a;
+	phsha->HalSdioHostGetCardStatus = &HalSdioHostGetCardStatusRtl8195a;
+	phsha->HalSdioHostGetSdStatus = &HalSdioHostGetSdStatusRtl8195a;
+	phsha->HalSdioHostChangeSdClock = &HalSdioHostChangeSdClockRtl8195a;
+	phsha->HalSdioHostErase = &HalSdioHostEraseRtl8195a;
+	phsha->HalSdioHostGetWriteProtect = &HalSdioHostGetWriteProtectRtl8195a;
+	phsha->HalSdioHostSetWriteProtect = &HalSdioHostSetWriteProtectRtl8195a;
+//#ifdef RTL8710AF
+	if(HalGetChipId() != CHIP_ID_8195AM) {
+		GPIOState[0] &= ~((1 << 8) - 1);
+		{
+			for (int i = 0; i <= 6; i++)
+				HAL_GPIO_PullCtrl(i, PullNone);
+			HAL_GPIO_PullCtrl(PA_6, PullDown);
+			HAL_GPIO_PullCtrl(PA_7, PullDown);
+		}
+	}
+//#endif
+}
+
+#endif // CONFIG_SDIO_HOST_EN
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_sdr_controller.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_sdr_controller.c
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_soc_ps_monitor.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_soc_ps_monitor.c
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_spi_flash_ram.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_spi_flash_ram.c
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_ssi.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_ssi.c
@ -0,0 +1,689 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+#include "rtl8195a.h"
+#include "hal_ssi.h"
+
+#ifdef CONFIG_SOC_PS_EN
+
+const HAL_GDMA_CHNL Ssi2_TX_GDMA_Chnl_Option[] = { 
+    {0,4,GDMA0_CHANNEL4_IRQ,0},
+    {0,5,GDMA0_CHANNEL5_IRQ,0},
+    {0,3,GDMA0_CHANNEL3_IRQ,0},
+    {0,0,GDMA0_CHANNEL0_IRQ,0},
+    {0,1,GDMA0_CHANNEL1_IRQ,0},
+    {0,2,GDMA0_CHANNEL2_IRQ,0},
+    
+    {0xff,0,0,0}    // end
+};
+
+const HAL_GDMA_CHNL Ssi2_RX_GDMA_Chnl_Option[] = { 
+    {1,4,GDMA1_CHANNEL4_IRQ,0},
+    {1,5,GDMA1_CHANNEL5_IRQ,0},
+    {1,3,GDMA1_CHANNEL3_IRQ,0},
+    {1,0,GDMA1_CHANNEL0_IRQ,0},
+    {1,1,GDMA1_CHANNEL1_IRQ,0},
+    {1,2,GDMA1_CHANNEL2_IRQ,0},
+    
+    {0xff,0,0,0}    // end
+};
+
+const HAL_GDMA_CHNL Ssi_MultiBlk_GDMA_Chnl_Option[] = {
+    {0,4,GDMA0_CHANNEL4_IRQ,0},
+    {0,5,GDMA0_CHANNEL5_IRQ,0},
+    {1,4,GDMA1_CHANNEL4_IRQ,0},
+    {1,5,GDMA1_CHANNEL5_IRQ,0},
+    {0xff,0,0,0}    // end
+};
+
+//TODO: Load default Setting: It should be loaded from external setting file.
+const DW_SSI_DEFAULT_SETTING SpiDefaultSetting =
+{
+    .RxCompCallback    = NULL,
+    .RxCompCbPara      = NULL,
+    .RxData            = NULL,
+    .TxCompCallback    = NULL,
+    .TxCompCbPara      = NULL,
+    .TxData            = NULL,
+    .DmaRxDataLevel    =    7,  // RX FIFO stored bytes > (DMARDLR(7) + 1) then trigger DMA transfer
+    .DmaTxDataLevel    =   48,  // TX FIFO free space > (FIFO_SPACE(64)-DMATDLR(48)) then trigger DMA transfer
+    .InterruptPriority =   10,
+    .RxLength          =    0,
+    .RxLengthRemainder =    0,
+    .RxThresholdLevel  =    7,  // if number of entries in th RX FIFO >= (RxThresholdLevel+1), RX interrupt asserted
+    .TxLength          =    0,
+    .TxThresholdLevel  =    8,  // if number of entries in th TX FIFO <= TxThresholdLevel, TX interrupt asserted
+    .SlaveSelectEnable =    0,
+    .ClockDivider      = SSI_CLK_SPI0_2/1000000,    // SCLK=1M
+    .DataFrameNumber   =    0,
+    .ControlFrameSize  = CFS_1_BIT,
+    .DataFrameFormat   = FRF_MOTOROLA_SPI,
+    .DataFrameSize     = DFS_8_BITS,
+    .DmaControl        = 0, // default DMA is disable
+    .InterruptMask     =  0x0,
+    .MicrowireDirection    = MW_DIRECTION_MASTER_TO_SLAVE,
+    .MicrowireHandshaking  = MW_HANDSHAKE_DISABLE,
+    .MicrowireTransferMode = MW_TMOD_NONSEQUENTIAL,
+    .SclkPhase             = SCPH_TOGGLES_AT_START,
+    .SclkPolarity          = SCPOL_INACTIVE_IS_HIGH,
+    .SlaveOutputEnable     = SLV_TXD_ENABLE,  // Slave
+    .TransferMode          = TMOD_TR,
+    .TransferMechanism     = SSI_DTM_INTERRUPT
+};
+
+extern HAL_Status HalSsiInitRtl8195a_Patch(VOID *Adaptor);
+extern HAL_Status HalSsiPinmuxEnableRtl8195a_Patch(VOID *Adaptor);
+extern HAL_Status HalSsiPinmuxDisableRtl8195a(VOID *Adaptor);
+extern HAL_Status HalSsiDeInitRtl8195a(VOID * Adapter);
+extern HAL_Status HalSsiClockOffRtl8195a(VOID * Adapter);
+extern HAL_Status HalSsiClockOnRtl8195a(VOID * Adapter);
+extern HAL_Status HalSsiIntReadRtl8195a(VOID *Adapter, VOID *RxData, u32 Length);
+extern HAL_Status HalSsiIntWriteRtl8195a(VOID *Adapter, u8 *pTxData, u32 Length);
+extern HAL_Status HalSsiEnterCriticalRtl8195a(VOID * Data);
+extern HAL_Status HalSsiExitCriticalRtl8195a(VOID * Data);
+extern HAL_Status HalSsiIsTimeoutRtl8195a(u32 StartCount, u32 TimeoutCnt);
+extern HAL_Status HalSsiStopRecvRtl8195a(VOID * Data);
+extern HAL_Status HalSsiSetFormatRtl8195a(VOID * Adaptor);
+extern VOID HalSsiSetSclkRtl8195a(VOID *Adapter, u32 ClkRate);
+#ifdef CONFIG_GDMA_EN
+extern VOID HalSsiDmaInitRtl8195a(VOID *Adapter);
+#endif
+
+VOID HalSsiOpInit(VOID *Adaptor)
+{
+    PHAL_SSI_OP pHalSsiOp = (PHAL_SSI_OP) Adaptor;
+
+//    pHalSsiOp->HalSsiPinmuxEnable            = HalSsiPinmuxEnableRtl8195a;
+#if CONFIG_CHIP_E_CUT
+    pHalSsiOp->HalSsiPinmuxEnable            = HalSsiPinmuxEnableRtl8195a_V04;
+    pHalSsiOp->HalSsiPinmuxDisable           = HalSsiPinmuxDisableRtl8195a_V04;
+#else
+    pHalSsiOp->HalSsiPinmuxEnable            = HalSsiPinmuxEnableRtl8195a_Patch;
+    pHalSsiOp->HalSsiPinmuxDisable           = HalSsiPinmuxDisableRtl8195a;
+#endif
+
+    pHalSsiOp->HalSsiEnable                  = HalSsiEnableRtl8195a;
+    pHalSsiOp->HalSsiDisable                 = HalSsiDisableRtl8195a;
+//    pHalSsiOp->HalSsiInit                    = HalSsiInitRtl8195a;
+#if CONFIG_CHIP_E_CUT
+    pHalSsiOp->HalSsiInit                    = HalSsiInitRtl8195a_V04;
+#else
+    pHalSsiOp->HalSsiInit                    = HalSsiInitRtl8195a_Patch;
+#endif
+    pHalSsiOp->HalSsiSetSclkPolarity         = HalSsiSetSclkPolarityRtl8195a;
+    pHalSsiOp->HalSsiSetSclkPhase            = HalSsiSetSclkPhaseRtl8195a;
+    pHalSsiOp->HalSsiWrite                   = HalSsiWriteRtl8195a;
+    pHalSsiOp->HalSsiRead                    = HalSsiReadRtl8195a;
+    pHalSsiOp->HalSsiGetRxFifoLevel          = HalSsiGetRxFifoLevelRtl8195a;
+    pHalSsiOp->HalSsiGetTxFifoLevel          = HalSsiGetTxFifoLevelRtl8195a;
+    pHalSsiOp->HalSsiGetStatus               = HalSsiGetStatusRtl8195a;
+    pHalSsiOp->HalSsiGetInterruptStatus      = HalSsiGetInterruptStatusRtl8195a;
+    pHalSsiOp->HalSsiLoadSetting             = HalSsiLoadSettingRtl8195a;
+    pHalSsiOp->HalSsiSetInterruptMask        = HalSsiSetInterruptMaskRtl8195a;
+    pHalSsiOp->HalSsiGetInterruptMask        = HalSsiGetInterruptMaskRtl8195a;
+    pHalSsiOp->HalSsiSetDeviceRole           = HalSsiSetDeviceRoleRtl8195a;
+    pHalSsiOp->HalSsiWriteable               = HalSsiWriteableRtl8195a;
+    pHalSsiOp->HalSsiReadable                = HalSsiReadableRtl8195a;
+    pHalSsiOp->HalSsiBusy                    = HalSsiBusyRtl8195a;
+    pHalSsiOp->HalSsiInterruptEnable         = HalSsiInterruptEnableRtl8195a;
+    pHalSsiOp->HalSsiInterruptDisable        = HalSsiInterruptDisableRtl8195a;
+//    pHalSsiOp->HalSsiReadInterrupt           = HalSsiReadInterruptRtl8195a;
+#if CONFIG_CHIP_E_CUT
+    pHalSsiOp->HalSsiReadInterrupt           = HalSsiIntReadRtl8195a_V04;
+#else
+    pHalSsiOp->HalSsiReadInterrupt           = HalSsiIntReadRtl8195a;
+#endif
+    pHalSsiOp->HalSsiSetRxFifoThresholdLevel = HalSsiSetRxFifoThresholdLevelRtl8195a;
+    pHalSsiOp->HalSsiSetTxFifoThresholdLevel = HalSsiSetTxFifoThresholdLevelRtl8195a;
+//    pHalSsiOp->HalSsiWriteInterrupt          = HalSsiWriteInterruptRtl8195a;
+#if CONFIG_CHIP_E_CUT
+    pHalSsiOp->HalSsiWriteInterrupt          = HalSsiIntWriteRtl8195a_V04;
+#else
+    pHalSsiOp->HalSsiWriteInterrupt          = HalSsiIntWriteRtl8195a;
+#endif
+    pHalSsiOp->HalSsiGetRawInterruptStatus   = HalSsiGetRawInterruptStatusRtl8195a;
+    pHalSsiOp->HalSsiGetSlaveEnableRegister  = HalSsiGetSlaveEnableRegisterRtl8195a;
+    pHalSsiOp->HalSsiSetSlaveEnableRegister  = HalSsiSetSlaveEnableRegisterRtl8195a;
+}
+
+
+#ifdef CONFIG_GDMA_EN    
+HAL_Status
+HalSsiTxMultiBlkChnl(
+    IN PHAL_SSI_ADAPTOR pHalSsiAdapter
+)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PSSI_DMA_CONFIG pDmaConfig;    
+    HAL_GDMA_CHNL *pgdma_chnl;
+
+    pDmaConfig = &pHalSsiAdapter->DmaConfig;
+    pHalGdmaAdapter = (PHAL_GDMA_ADAPTER)pDmaConfig->pTxHalGdmaAdapter;
+
+    if((pHalSsiAdapter->HaveTxChannel == 1) && (pHalGdmaAdapter->ChNum != 4) && (pHalGdmaAdapter->ChNum != 5)){
+        HalSsiTxGdmaDeInit(pHalSsiAdapter);
+    }
+    if(pHalSsiAdapter->HaveTxChannel == 0){
+        pgdma_chnl = HalGdmaChnlAlloc((HAL_GDMA_CHNL*)Ssi_MultiBlk_GDMA_Chnl_Option);
+        if (pgdma_chnl == NULL) {
+            DBG_SSI_ERR("No Available DMA channel\n");
+            return HAL_BUSY;
+        }
+        else {
+            pHalGdmaAdapter->GdmaIndex   = pgdma_chnl->GdmaIndx;
+            pHalGdmaAdapter->ChNum       = pgdma_chnl->GdmaChnl;
+            pHalGdmaAdapter->ChEn        = 0x0101 << pgdma_chnl->GdmaChnl;
+            pDmaConfig->TxGdmaIrqHandle.IrqNum = pgdma_chnl->IrqNum;       
+            pHalSsiAdapter->HaveTxChannel = 1;
+            InterruptRegister(&pDmaConfig->TxGdmaIrqHandle);
+            InterruptEn(&pDmaConfig->TxGdmaIrqHandle);    
+        }
+        HalSsiDmaInit(pHalSsiAdapter);  
+    }
+    DBG_SSI_INFO("TX GDMA Index = %x, Channel = %x\n",pHalGdmaAdapter->GdmaIndex,pHalGdmaAdapter->ChNum);
+    return HAL_OK;
+}
+
+HAL_Status
+HalSsiTxSingleBlkChnl(
+    IN PHAL_SSI_ADAPTOR pHalSsiAdapter
+)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PSSI_DMA_CONFIG pDmaConfig;    
+    HAL_GDMA_CHNL *pgdma_chnl;
+
+    pDmaConfig = &pHalSsiAdapter->DmaConfig;
+    pHalGdmaAdapter = (PHAL_GDMA_ADAPTER)pDmaConfig->pTxHalGdmaAdapter;
+
+    if(pHalSsiAdapter->HaveTxChannel == 0){
+        if (HalGdmaChnlRegister(pHalGdmaAdapter->GdmaIndex, pHalGdmaAdapter->ChNum) != HAL_OK) {
+            // The default GDMA Channel is not available, try others
+            if (pHalSsiAdapter->Index == 2) {
+                // SSI2 TX Only can use GDMA 0
+                pgdma_chnl = HalGdmaChnlAlloc((HAL_GDMA_CHNL*)Ssi2_TX_GDMA_Chnl_Option);
+            }
+            else {
+                pgdma_chnl = HalGdmaChnlAlloc(NULL);
+            }
+
+            if (pgdma_chnl == NULL) {
+                DBG_SSI_ERR("No Available DMA channel\n");
+                return HAL_BUSY;
+            }
+            else {
+                pHalGdmaAdapter->GdmaIndex   = pgdma_chnl->GdmaIndx;
+                pHalGdmaAdapter->ChNum       = pgdma_chnl->GdmaChnl;
+                pHalGdmaAdapter->ChEn        = 0x0101 << pgdma_chnl->GdmaChnl;
+                pDmaConfig->TxGdmaIrqHandle.IrqNum = pgdma_chnl->IrqNum;
+                pHalSsiAdapter->HaveTxChannel = 1;
+            }
+        }
+        else{
+            pHalSsiAdapter->HaveTxChannel = 1;
+        }
+        InterruptRegister(&pDmaConfig->TxGdmaIrqHandle);
+        InterruptEn(&pDmaConfig->TxGdmaIrqHandle);            
+        DBG_SSI_INFO("TX GDMA Index = %x, Channle number = %x\n",pHalGdmaAdapter->GdmaIndex,pHalGdmaAdapter->ChNum);
+        HalSsiDmaInit(pHalSsiAdapter);  
+    }
+    
+    return HAL_OK;
+
+}
+
+HAL_Status
+HalSsiTxGdmaInit(
+    IN PHAL_SSI_OP pHalSsiOp,
+    IN PHAL_SSI_ADAPTOR pHalSsiAdapter
+)
+{
+    
+    if ((NULL == pHalSsiOp) || (NULL == pHalSsiAdapter)) {
+        return HAL_ERR_PARA;
+    }
+
+    // Load default setting
+    #if CONFIG_CHIP_E_CUT
+    HalSsiTxGdmaLoadDefRtl8195a_V04((void*)pHalSsiAdapter);
+    #else
+    HalSsiTxGdmaLoadDefRtl8195a((void*)pHalSsiAdapter);
+    #endif
+    return HAL_OK;
+}
+
+VOID
+HalSsiTxGdmaDeInit(
+    IN PHAL_SSI_ADAPTOR pHalSsiAdapter
+)
+{
+    PSSI_DMA_CONFIG pDmaConfig;    
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    HAL_GDMA_CHNL GdmaChnl;
+    
+    if (NULL == pHalSsiAdapter) {
+        return;
+    }
+
+    pDmaConfig = &pHalSsiAdapter->DmaConfig;
+
+    pHalGdmaAdapter = (PHAL_GDMA_ADAPTER)pDmaConfig->pTxHalGdmaAdapter;
+    GdmaChnl.GdmaIndx = pHalGdmaAdapter->GdmaIndex;
+    GdmaChnl.GdmaChnl = pHalGdmaAdapter->ChNum;
+    GdmaChnl.IrqNum = pDmaConfig->TxGdmaIrqHandle.IrqNum;
+    HalGdmaChnlFree(&GdmaChnl);
+    pHalSsiAdapter->HaveTxChannel = 0;
+}
+
+
+HAL_Status
+HalSsiDmaSend(
+    IN VOID *Adapter,      // PHAL_SSI_ADAPTOR
+    IN u8  *pTxData,  ///< Rx buffer
+    IN u32 Length      // buffer length
+)
+{
+    PHAL_SSI_ADAPTOR pHalSsiAdapter = (PHAL_SSI_ADAPTOR) Adapter;
+    PSSI_DMA_CONFIG pDmaConfig;
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PHAL_GDMA_OP pHalGdmaOp;
+    
+    pDmaConfig = &pHalSsiAdapter->DmaConfig;    
+    pHalGdmaAdapter = (PHAL_GDMA_ADAPTER)pDmaConfig->pTxHalGdmaAdapter;
+
+    #if CONFIG_CHIP_E_CUT
+    HalSsiDmaSendRtl8195a_V04(pHalSsiAdapter,pTxData,Length);
+    #else
+    HalSsiDmaSendRtl8195a(pHalSsiAdapter,pTxData,Length);
+    #endif
+    if (pHalGdmaAdapter->GdmaCtl.BlockSize > MAX_DMA_BLOCK_SIZE) {
+        // Maximum Data Length is 4092*16
+        #if CONFIG_CHIP_E_CUT
+        HalSsiDmaSendMultiBlockRtl8195a_V04(pHalSsiAdapter, pTxData, pHalGdmaAdapter->GdmaCtl.BlockSize);
+        #else
+        HalSsiDmaSendMultiBlockRtl8195a(pHalSsiAdapter, pTxData, pHalGdmaAdapter->GdmaCtl.BlockSize);
+        #endif
+        HalSsiTxMultiBlkChnl(pHalSsiAdapter);
+    }
+    else{
+        pHalGdmaAdapter->ChSar= (u32)pTxData;
+        HalSsiTxSingleBlkChnl(pHalSsiAdapter);
+        pHalGdmaAdapter->Rsvd4to7 = 0;
+        pHalGdmaAdapter->Llpctrl = 0;
+        pHalGdmaAdapter->GdmaCtl.LlpSrcEn = 0;
+        pHalGdmaAdapter->GdmaCtl.LlpDstEn = 0;
+        pHalGdmaAdapter->GdmaCfg.ReloadDst = 0;
+        pHalGdmaAdapter->GdmaCfg.ReloadSrc = 0;        
+    }
+
+    // Enable GDMA for TX
+    pHalGdmaOp = (PHAL_GDMA_OP)pDmaConfig->pHalGdmaOp;
+    pHalGdmaOp->HalGdmaOnOff((VOID*)(pHalGdmaAdapter));
+    pHalGdmaOp->HalGdmaChIsrEnAndDis((VOID*)(pHalGdmaAdapter));
+
+    if(pHalGdmaAdapter->Llpctrl)
+        pHalGdmaOp->HalGdmaChBlockSeting((VOID*)(pHalGdmaAdapter));
+    else
+        pHalGdmaOp->HalGdmaChSeting((VOID*)(pHalGdmaAdapter));
+    pHalGdmaOp->HalGdmaChEn((VOID*)(pHalGdmaAdapter));
+
+    return HAL_OK;
+}
+
+
+HAL_Status
+HalSsiRxMultiBlkChnl(
+    IN PHAL_SSI_ADAPTOR pHalSsiAdapter
+)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PSSI_DMA_CONFIG pDmaConfig;    
+    HAL_GDMA_CHNL *pgdma_chnl;
+
+    pDmaConfig = &pHalSsiAdapter->DmaConfig;
+    pHalGdmaAdapter = (PHAL_GDMA_ADAPTER)pDmaConfig->pRxHalGdmaAdapter;
+    
+    if((pHalSsiAdapter->HaveRxChannel == 1) && (pHalGdmaAdapter->ChNum != 4) && (pHalGdmaAdapter->ChNum != 5)){
+        HalSsiRxGdmaDeInit(pHalSsiAdapter);
+    }
+    if(pHalSsiAdapter->HaveRxChannel == 0){
+        pgdma_chnl = HalGdmaChnlAlloc((HAL_GDMA_CHNL*)Ssi_MultiBlk_GDMA_Chnl_Option);
+        if (pgdma_chnl == NULL) {
+            DBG_SSI_ERR("No Available DMA channel\n");
+            return HAL_BUSY;
+        }
+        else {
+            pHalGdmaAdapter->GdmaIndex   = pgdma_chnl->GdmaIndx;
+            pHalGdmaAdapter->ChNum       = pgdma_chnl->GdmaChnl;
+            pHalGdmaAdapter->ChEn        = 0x0101 << pgdma_chnl->GdmaChnl;
+            pDmaConfig->RxGdmaIrqHandle.IrqNum = pgdma_chnl->IrqNum; 
+            pHalSsiAdapter->HaveRxChannel = 1;
+            InterruptRegister(&pDmaConfig->RxGdmaIrqHandle);
+            InterruptEn(&pDmaConfig->RxGdmaIrqHandle);
+        }
+        HalSsiDmaInit(pHalSsiAdapter);  
+    }
+    DBG_SSI_INFO("RX GDMA index = %x, Channel = %x\n",pHalGdmaAdapter->GdmaIndex,pHalGdmaAdapter->ChNum);
+    return HAL_OK;
+}
+
+HAL_Status
+HalSsiRxSingleBlkChnl(
+    IN PHAL_SSI_ADAPTOR pHalSsiAdapter
+)
+{
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PSSI_DMA_CONFIG pDmaConfig;    
+    HAL_GDMA_CHNL *pgdma_chnl;
+
+    pDmaConfig = &pHalSsiAdapter->DmaConfig;
+    pHalGdmaAdapter = (PHAL_GDMA_ADAPTER)pDmaConfig->pRxHalGdmaAdapter;
+
+    if(pHalSsiAdapter->HaveRxChannel == 0){    
+        if (HalGdmaChnlRegister(pHalGdmaAdapter->GdmaIndex, pHalGdmaAdapter->ChNum) != HAL_OK) {
+            // The default GDMA Channel is not available, try others
+            if (pHalSsiAdapter->Index == 2) {
+                // SSI2 RX Only can use GDMA 1
+                pgdma_chnl = HalGdmaChnlAlloc((HAL_GDMA_CHNL*)Ssi2_RX_GDMA_Chnl_Option);
+            }
+            else {
+                pgdma_chnl = HalGdmaChnlAlloc(NULL);
+            }
+
+            if (pgdma_chnl == NULL) {
+                DBG_SSI_ERR("No Available DMA channel\n");
+                return HAL_BUSY;
+            }
+            else {
+                pHalGdmaAdapter->GdmaIndex   = pgdma_chnl->GdmaIndx;
+                pHalGdmaAdapter->ChNum       = pgdma_chnl->GdmaChnl;
+                pHalGdmaAdapter->ChEn        = 0x0101 << pgdma_chnl->GdmaChnl;
+                pDmaConfig->RxGdmaIrqHandle.IrqNum = pgdma_chnl->IrqNum; 
+                pHalSsiAdapter->HaveRxChannel = 1;
+            }
+        }
+        else{
+            pHalSsiAdapter->HaveRxChannel = 1;
+        }
+        InterruptRegister(&pDmaConfig->RxGdmaIrqHandle);
+        InterruptEn(&pDmaConfig->RxGdmaIrqHandle);
+        DBG_SSI_INFO("RX GDMA Index = %x, Channle number = %x\n",pHalGdmaAdapter->GdmaIndex,pHalGdmaAdapter->ChNum);
+        HalSsiDmaInit(pHalSsiAdapter);  
+    }   
+    return HAL_OK;
+
+}
+
+HAL_Status
+HalSsiRxGdmaInit(
+    IN PHAL_SSI_OP pHalSsiOp,
+    IN PHAL_SSI_ADAPTOR pHalSsiAdapter
+)
+{
+    
+    if ((NULL == pHalSsiOp) || (NULL == pHalSsiAdapter)) {
+        return HAL_ERR_PARA;
+    }
+
+    // Load default setting
+    #if CONFIG_CHIP_E_CUT
+    HalSsiRxGdmaLoadDefRtl8195a_V04((void*)pHalSsiAdapter);
+    #else
+    HalSsiRxGdmaLoadDefRtl8195a((void*)pHalSsiAdapter);
+    #endif
+    return HAL_OK;
+}
+
+VOID
+HalSsiRxGdmaDeInit(
+    IN PHAL_SSI_ADAPTOR pHalSsiAdapter
+)
+{
+    PSSI_DMA_CONFIG pDmaConfig;    
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    HAL_GDMA_CHNL GdmaChnl;
+    
+    if (NULL == pHalSsiAdapter) {
+        return;
+    }
+
+    pDmaConfig = &pHalSsiAdapter->DmaConfig;
+
+    pHalGdmaAdapter = (PHAL_GDMA_ADAPTER)pDmaConfig->pRxHalGdmaAdapter;
+    GdmaChnl.GdmaIndx = pHalGdmaAdapter->GdmaIndex;
+    GdmaChnl.GdmaChnl = pHalGdmaAdapter->ChNum;
+    GdmaChnl.IrqNum = pDmaConfig->RxGdmaIrqHandle.IrqNum;
+    HalGdmaChnlFree(&GdmaChnl);
+    pHalSsiAdapter->HaveRxChannel = 0;
+}
+
+HAL_Status
+HalSsiDmaRecv(
+    IN VOID *Adapter,      // PHAL_SSI_ADAPTOR
+    IN u8  *pRxData,  ///< Rx buffer
+    IN u32 Length      // buffer length
+)
+{
+    PHAL_SSI_ADAPTOR pHalSsiAdapter = (PHAL_SSI_ADAPTOR) Adapter;
+    PSSI_DMA_CONFIG pDmaConfig;
+    PHAL_GDMA_ADAPTER pHalGdmaAdapter;
+    PHAL_GDMA_OP pHalGdmaOp;
+    
+    pDmaConfig = &pHalSsiAdapter->DmaConfig;    
+    pHalGdmaAdapter = (PHAL_GDMA_ADAPTER)pDmaConfig->pRxHalGdmaAdapter;
+
+    #if CONFIG_CHIP_E_CUT
+    HalSsiDmaRecvRtl8195a_V04(pHalSsiAdapter,pRxData,Length);
+    #else
+    HalSsiDmaRecvRtl8195a(pHalSsiAdapter,pRxData,Length);
+    #endif
+    
+    if (pHalGdmaAdapter->GdmaCtl.BlockSize > MAX_DMA_BLOCK_SIZE) {
+        // Maximum Data Length is 4092*16
+        #if CONFIG_CHIP_E_CUT
+        HalSsiDmaRecvMultiBlockRtl8195a_V04(pHalSsiAdapter, pRxData, pHalGdmaAdapter->GdmaCtl.BlockSize);
+        #else
+        HalSsiDmaRecvMultiBlockRtl8195a(pHalSsiAdapter, pRxData, pHalGdmaAdapter->GdmaCtl.BlockSize);
+        #endif
+        HalSsiRxMultiBlkChnl(pHalSsiAdapter);
+    }
+    else{
+        pHalGdmaAdapter->ChDar = (u32)pRxData;
+        HalSsiRxSingleBlkChnl(pHalSsiAdapter);
+        pHalGdmaAdapter->Rsvd4to7 = 0;
+        pHalGdmaAdapter->Llpctrl = 0;
+        pHalGdmaAdapter->GdmaCtl.LlpSrcEn = 0;
+        pHalGdmaAdapter->GdmaCtl.LlpDstEn = 0;
+        pHalGdmaAdapter->GdmaCfg.ReloadDst = 0;
+        pHalGdmaAdapter->GdmaCfg.ReloadSrc = 0;     
+
+    }
+
+    // Enable GDMA for RX
+    pHalGdmaOp = (PHAL_GDMA_OP)pDmaConfig->pHalGdmaOp;
+    pHalGdmaOp->HalGdmaOnOff((VOID*)(pHalGdmaAdapter));
+    pHalGdmaOp->HalGdmaChIsrEnAndDis((VOID*)(pHalGdmaAdapter));
+    
+    if(pHalGdmaAdapter->Llpctrl)
+        pHalGdmaOp->HalGdmaChBlockSeting((VOID*)(pHalGdmaAdapter));
+    else
+        pHalGdmaOp->HalGdmaChSeting((VOID*)(pHalGdmaAdapter));
+    pHalGdmaOp->HalGdmaChEn((VOID*)(pHalGdmaAdapter));
+    
+    return HAL_OK;
+
+}
+
+#endif  // end of "#ifdef CONFIG_GDMA_EN"
+
+HAL_Status
+HalSsiInit(VOID *Data)
+{
+    HAL_Status ret;
+    PHAL_SSI_ADAPTOR pHalSsiAdapter = (PHAL_SSI_ADAPTOR) Data;
+    u32 Function;
+    u8 PinmuxSelect;
+    u8 Index;
+
+    PinmuxSelect = pHalSsiAdapter->PinmuxSelect;
+    Index = pHalSsiAdapter->Index;
+    switch (Index){
+        case 0:
+            Function = SPI0;
+            break;
+        case 1:
+            Function = SPI1;
+            break;
+        case 2:
+            Function = SPI2;
+            break;
+        default:
+            DBG_SSI_ERR("Invalid SPI Index.\n");
+            break;
+    }
+
+    ret = FunctionChk(Function, (u32)PinmuxSelect);
+    if(ret == _FALSE){
+        DBG_SSI_ERR("Invalid Pinmux Setting.\n");
+        return HAL_ERR_PARA;
+    }
+
+#ifdef CONFIG_SOC_PS_MODULE
+        REG_POWER_STATE SsiPwrState;
+#endif
+#if CONFIG_CHIP_E_CUT
+    ret = HalSsiInitRtl8195a_V04(pHalSsiAdapter);    
+#else
+    ret = HalSsiInitRtl8195a_Patch(pHalSsiAdapter);
+#endif
+#ifdef CONFIG_SOC_PS_MODULE
+        if(ret == HAL_OK) {
+            // To register a new peripheral device power state
+            SsiPwrState.FuncIdx = SPI0+ pHalSsiAdapter->Index;
+            SsiPwrState.PwrState = ACT;
+            RegPowerState(SsiPwrState);
+        }
+#endif
+
+    return ret;   
+}
+
+HAL_Status
+HalSsiDeInit(VOID *Data)
+{
+    HAL_Status ret;
+    PHAL_SSI_ADAPTOR pHalSsiAdapter = (PHAL_SSI_ADAPTOR) Data;
+#ifdef CONFIG_SOC_PS_MODULE
+        REG_POWER_STATE SsiPwrState;
+        u8 HardwareState;
+
+        SsiPwrState.FuncIdx= SPI0+ pHalSsiAdapter->Index;
+        QueryRegPwrState(SsiPwrState.FuncIdx, &(SsiPwrState.PwrState), &HardwareState);
+
+        if(SsiPwrState.PwrState != HardwareState){
+            DBG_SSI_ERR("Registered State is not the Hardware State");
+            return HAL_ERR_UNKNOWN;
+        }
+        else{
+            if((SsiPwrState.PwrState != INACT) && (SsiPwrState.PwrState !=ACT)){
+                    DBG_SSI_INFO("Return to ACT state before DeInit");
+                    HalSsiEnable(pHalSsiAdapter);
+                    QueryRegPwrState(SsiPwrState.FuncIdx, &(SsiPwrState.PwrState), &HardwareState);
+            }
+            if(SsiPwrState.PwrState == ACT){
+                SsiPwrState.PwrState = INACT;
+                RegPowerState(SsiPwrState);
+            }          
+        }
+#endif
+#if CONFIG_CHIP_E_CUT
+    ret = HalSsiDeInitRtl8195a_V04(pHalSsiAdapter);
+#else
+    ret = HalSsiDeInitRtl8195a(pHalSsiAdapter);
+#endif
+    return ret;
+}
+
+
+HAL_Status
+HalSsiEnable(VOID *Data)
+{
+    HAL_Status ret;
+    PHAL_SSI_ADAPTOR pHalSsiAdapter = (PHAL_SSI_ADAPTOR) Data;
+#ifdef CONFIG_SOC_PS_MODULE
+        REG_POWER_STATE SsiPwrState;
+#endif
+#if CONFIG_CHIP_E_CUT
+    ret = HalSsiClockOnRtl8195a_V04(pHalSsiAdapter);
+#else
+    ret = HalSsiClockOnRtl8195a(pHalSsiAdapter);
+#endif
+#ifdef CONFIG_SOC_PS_MODULE
+        if(ret == HAL_OK) {
+            // To register a new peripheral device power state
+            SsiPwrState.FuncIdx = SPI0+ pHalSsiAdapter->Index;
+            SsiPwrState.PwrState = ACT;
+            RegPowerState(SsiPwrState);
+        }
+#endif
+
+    return ret;   
+}
+
+HAL_Status
+HalSsiDisable(VOID *Data)
+{
+    HAL_Status ret;
+    PHAL_SSI_ADAPTOR pHalSsiAdapter = (PHAL_SSI_ADAPTOR) Data;
+#ifdef CONFIG_SOC_PS_MODULE
+        REG_POWER_STATE SsiPwrState;
+#endif
+#if CONFIG_CHIP_E_CUT
+    ret = HalSsiClockOffRtl8195a_V04(pHalSsiAdapter);
+#else
+    ret = HalSsiClockOffRtl8195a(pHalSsiAdapter);
+#endif
+#ifdef CONFIG_SOC_PS_MODULE
+        if(ret == HAL_OK) {
+            // To register a new peripheral device power state
+            SsiPwrState.FuncIdx = SPI0+ pHalSsiAdapter->Index;
+            SsiPwrState.PwrState = SLPCG;
+            RegPowerState(SsiPwrState);
+        }
+#endif
+
+    return ret;   
+}
+
+HAL_Status HalSsiEnterCritical(VOID *Data)
+{
+    return HalSsiEnterCriticalRtl8195a(Data);
+}
+
+HAL_Status HalSsiExitCritical(VOID *Data)
+{
+    return HalSsiExitCriticalRtl8195a(Data);
+}
+
+HAL_Status HalSsiTimeout(u32 StartCount, u32 TimeoutCnt)
+{
+    return HalSsiIsTimeoutRtl8195a(StartCount,TimeoutCnt);
+}
+
+HAL_Status HalSsiStopRecv(VOID * Data)
+{
+    return HalSsiStopRecvRtl8195a(Data);
+}
+
+HAL_Status HalSsiSetFormat(VOID * Data)
+{
+    return HalSsiSetFormatRtl8195a(Data);
+}
+
+#endif // CONFIG_SOC_PS_EN
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_timer.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_timer.c
@ -0,0 +1,38 @@
+/*
+ *  Routines to access hardware
+ *
+ *  Copyright (c) 2013 Realtek Semiconductor Corp.
+ *
+ *  This module is a confidential and proprietary property of RealTek and
+ *  possession or use of this module requires written permission of RealTek.
+ */
+
+
+#include "rtl8195a.h"
+
+#ifdef CONFIG_TIMER_EN
+VOID 
+HalTimerOpInit_Patch(
+    IN  VOID *Data
+)
+{
+    PHAL_TIMER_OP pHalTimerOp = (PHAL_TIMER_OP) Data;
+
+    pHalTimerOp->HalGetTimerId = HalGetTimerIdRtl8195a;    
+#ifdef CONFIG_CHIP_E_CUT
+    pHalTimerOp->HalTimerInit = (BOOL (*)(void*))HalTimerInitRtl8195a_V04;   
+#else
+    pHalTimerOp->HalTimerInit = (BOOL (*)(void*))HalTimerInitRtl8195a_Patch;   
+#endif
+#if defined(CONFIG_CHIP_C_CUT) || defined(CONFIG_CHIP_E_CUT)
+    pHalTimerOp->HalTimerReadCount = HalTimerReadCountRtl8195aV02;    
+#else
+    pHalTimerOp->HalTimerReadCount = HalTimerReadCountRtl8195a_Patch;    
+#endif
+    pHalTimerOp->HalTimerIrqClear = HalTimerIrqClearRtl8195a;
+    pHalTimerOp->HalTimerDis = HalTimerDisRtl8195a_Patch;
+    pHalTimerOp->HalTimerEn = HalTimerEnRtl8195a_Patch;
+    pHalTimerOp->HalTimerDumpReg = HalTimerDumpRegRtl8195a;
+}
+
+#endif // CONFIG_TIMER_EN
--- a/sdk/component/soc/realtek/8195a/fwlib/src/hal_uart.c
+++ b/sdk/component/soc/realtek/8195a/fwlib/src/hal_uart.c