add and update

RTL00_SDKV35a/component/common/api/at_cmd/atcmd_sys.c

@@ -581,12 +581,11 @@ void fATSM(void *arg)
 }
 #endif
 
-extern u8 __HeapLimit, __StackTop;
 void fATSt(void *arg)
 {
 	AT_PRINTK("[ATS#]: _AT_SYSTEM_TEST_");
-	DBG_8195A("\nCLK CPU\t\t%d Hz\nRAM heap\t%d bytes\nRAM stack\t%d bytes\nTCM heap\t%d bytes\n",
-			HalGetCpuClk(), xPortGetFreeHeapSize(), (int)&__StackTop - (int)&__HeapLimit, tcm_heap_freeSpace());
+	DBG_8195A("\nCLK CPU\t\t%d Hz\nRAM heap\t%d bytes\nTCM heap\t%d bytes\n",
+			HalGetCpuClk(), xPortGetFreeHeapSize(), tcm_heap_freeSpace());
 	dump_mem_block_list();
 	tcm_heap_dump();
 	DBG_8195A("\n");
@@ -1159,16 +1158,13 @@ void fATSX(void *arg)
 
 void fATST(void *arg){
 	extern void dump_mem_block_list(void); // heap_5.c
-	extern u8 __HeapLimit, __StackTop;
-	extern struct Heap g_tcm_heap;
 		//DBG_INFO_MSG_ON(_DBG_TCM_HEAP_); // On Debug TCM MEM
 #if	DEBUG_AT_USER_LEVEL > 1
 		printf("ATST: Mem info:\n");
 #endif
 //		vPortFree(pvPortMalloc(4)); // Init RAM heap
-		printf("\nCLK CPU\t\t%d Hz\nRAM heap\t%d bytes\nRAM free\t%d bytes\nTCM heap\t%d bytes\n",
-				HalGetCpuClk(), xPortGetFreeHeapSize(), (int)&__StackTop - (int)&__HeapLimit, tcm_heap_freeSpace());
-		printf("TCM ps_monitor\t%d bytes\n", 0x20000000 - (u32)&tcm_heap - tcm_heap_size);
+		printf("\nCLK CPU\t\t%d Hz\nRAM heap\t%d bytes\nTCM heap\t%d bytes\n",
+				HalGetCpuClk(), xPortGetFreeHeapSize(), tcm_heap_freeSpace());
 		dump_mem_block_list();
 		u32 saved = ConfigDebugInfo;
 		DBG_INFO_MSG_ON(_DBG_TCM_HEAP_); // On Debug TCM MEM

RTL00_SDKV35a/component/common/api/wifi/rtw_wowlan/dev_wowlan.c

@@ -0,0 +1,149 @@
+#include <PinNames.h>
+#include <pinmap.h>
+#include <gpio_api.h>
+#include <wifi_wowlan.h>
+#include <freertos_pmu.h>
+#include <wifi_conf.h>
+
+#define CONFIG_WOWLAN_DEV_NT96658 //build for Nova NT96658
+//#define CONFIG_WOWLAN_DEV_OV788     //build for OmniVision OV788
+
+#if defined(CONFIG_WOWLAN_DEV_NT96658) && defined(CONFIG_WOWLAN_DEV_OV788)
+#error "CONFIG_WOWLAN_DEV_NT96658 and CONFIG_WOWLAN_DEV_OV788 are mutually exclusive. "
+#endif
+
+#ifdef CONFIG_WOWLAN_DEV_NT96658
+#define WOW_WIFI_IN_PIN			PE_4 //JTAG pin, so JTAG must be disable before using this pin as wakeup pin
+#define WOW_TRIGGER_INTERVAL		500
+#elif defined(CONFIG_WOWLAN_DEV_OV788)
+#define WOW_WIFI_IN_PIN			PD_5
+#define WOW_WLAN_ON_PIN			PB_3
+#define WOW_TRIGGER_INTERVAL		200
+#else
+#error "Either CONFIG_WOWLAN_DEV_NT96658 or CONFIG_WOWLAN_DEV_OV788 should be defined, but not both. "
+#endif
+
+//pin assignment for SDIO, default pull high
+#define SD_D2	PA_0
+#define SD_D3	PA_1
+#define SD_CMD	PA_2
+#define SD_CLK	PA_3
+#define SD_D0	PA_4
+#define SD_D1	PA_5
+#define SD_CD	PA_6
+
+gpio_t wow_gpio_wifi_in; //WOWLAN WAKEUP TRIGGER PORT
+gpio_t wow_gpio_wlan_on; //RECORD WOWLAN STATUS: 1:OFF, 0:ON
+
+int dev_wowlan_init(void){
+	WOWLAN_PRINTK("WOWLAN: device init!");
+
+#ifdef CONFIG_WOWLAN_DEV_OV788	       
+	// Initial WLAN_ON pin
+	gpio_init(&wow_gpio_wlan_on, WOW_WLAN_ON_PIN);
+	gpio_dir(&wow_gpio_wlan_on, PIN_OUTPUT); 
+	gpio_mode(&wow_gpio_wlan_on, PullNone); 
+	gpio_write(&wow_gpio_wlan_on, 1);
+#endif
+
+	return 0;
+}
+
+int dev_wowlan_enable(void){
+	WOWLAN_PRINTK("WOWLAN: device enable!");
+
+	// Init WIFI_IN pin (wakeup pin)
+	gpio_init(&wow_gpio_wifi_in, WOW_WIFI_IN_PIN);
+	gpio_dir(&wow_gpio_wifi_in, PIN_OUTPUT); 
+	gpio_mode(&wow_gpio_wifi_in, PullNone);
+	gpio_write(&wow_gpio_wifi_in, 0);
+	
+#ifdef CONFIG_WOWLAN_DEV_OV788
+	gpio_write(&wow_gpio_wlan_on, 0);
+#endif
+
+#if CONFIG_WLAN
+	wifi_set_power_mode(0xff, 1);
+#endif
+
+	return 0;
+}
+
+int dev_wowlan_wakeup_process(void){
+	WOWLAN_PRINTK("WOWLAN: device wake up!");
+
+#if defined(CONFIG_WOWLAN_DEV_NT96658) || defined(CONFIG_WOWLAN_DEV_OV788)
+#if defined(configUSE_WAKELOCK_PMU) && (configUSE_WAKELOCK_PMU == 1)
+	//acquire wakelock to keep system awake
+	acquire_wakelock(WAKELOCK_SDIO_DEVICE);
+#endif	
+#endif
+
+#ifdef CONFIG_WOWLAN_DEV_OV788
+	//record wowlan status
+	gpio_write(&wow_gpio_wlan_on, 1);
+#endif
+
+#if defined(CONFIG_WOWLAN_DEV_NT96658)
+	//restore SDIO pin status for bus communication
+	pin_mode(SD_D0, PullUp);
+	pin_mode(SD_D1, PullUp);
+	pin_mode(SD_D2, PullUp);
+	pin_mode(SD_D3, PullUp);
+	pin_mode(SD_CMD, PullUp);
+	pin_mode(SD_CLK, PullDown);
+#endif
+
+	//send signal to awake host
+	gpio_write(&wow_gpio_wifi_in, 0);
+	wowlan_mdelay_os(WOW_TRIGGER_INTERVAL);
+	gpio_write(&wow_gpio_wifi_in, 1);
+	wowlan_mdelay_os(WOW_TRIGGER_INTERVAL);
+	gpio_write(&wow_gpio_wifi_in, 0);
+	wowlan_mdelay_os(WOW_TRIGGER_INTERVAL);
+
+	return 0;
+}
+
+int dev_wowlan_sleep_process(void){
+
+#if defined(CONFIG_WOWLAN_DEV_NT96658)
+	//pull control for SDIO pin only when host is already power off 
+	if(rtw_wowlan_is_enabled() && (rtw_wowlan_get_wk_reason() == 0)){
+		WOWLAN_PRINTK("pull control");
+		//configure SDIO pin status for avoiding current leakage 
+		pin_mode(SD_D0, PullNone);
+		pin_mode(SD_D1, PullNone);
+		pin_mode(SD_D2, PullNone);
+		pin_mode(SD_D3, PullNone);
+		pin_mode(SD_CMD, PullNone);
+		pin_mode(SD_CLK, PullNone);
+	}
+#endif
+
+	return 0;
+}
+
+int dev_wowlan_disable(void){
+	WOWLAN_PRINTK("WOWLAN: device disable!");
+
+#if CONFIG_WLAN
+	wifi_set_power_mode(0xff, 0);
+#endif
+
+#ifdef CONFIG_WOWLAN_DEV_OV788
+	gpio_write(&wow_gpio_wlan_on, 1);
+#endif
+
+	return 0;
+}
+
+void dev_wowlan_ops_init(void *dev_ops){
+	struct rtw_wowlan_ops *ops = (struct rtw_wowlan_ops *)dev_ops;
+	WOWLAN_PRINTK("WOWLAN: device ops init!");
+	ops->DevWowlanInit = dev_wowlan_init;
+	ops->DevWowlanEnable = dev_wowlan_enable;
+	ops->DevWowlanDisable = dev_wowlan_disable;
+	ops->DevWowlanWakeUp = dev_wowlan_wakeup_process;
+	ops->DevWowlanSleep = dev_wowlan_sleep_process;
+}

RTL00_SDKV35a/component/common/api/wifi/rtw_wowlan/wifi_wowlan.h

@@ -0,0 +1,381 @@
+#ifndef _WIFI_WOWLAN_H_
+#define _WIFI_WOWLAN_H_
+
+#include <platform_stdlib.h>
+#include <osdep_service.h>
+#include <FreeRTOS.h>
+#include <timers.h>
+
+#define WOWLAN_DBG 1
+
+enum{
+	WOWLAN_DBG_OFF = 0,
+	WOWLAN_DBG_ALWAYS,
+	WOWLAN_DBG_ERROR,
+	WOWLAN_DBG_WARNING,
+	WOWLAN_DBG_INFO
+};
+
+#if WOWLAN_DBG
+	//#define WOWLAN_DUMP_MSG
+	#define WOWLAN_DUMP_MSG_1 //dump packet when setting
+	static unsigned char  gWowlanDbgLevel = WOWLAN_DBG_ERROR;
+	#define WOWLAN_PRINTK(fmt, args...)		printf(fmt"\r\n",## args)
+	#define _WOWLAN_PRINTK(fmt, args...)	printf(fmt,## args)
+	#define WOWLAN_DBG_MSG(level, fmt, args...)					\
+			do{														\
+				if(level <= gWowlanDbgLevel){	\
+					WOWLAN_PRINTK(fmt,## args);							\
+				}													\
+			}while(0)
+#else
+	#define WOWLAN_PRINTK(fmt, args...)
+	#define WOWLAN_DBG_MSG(level, fmt, args...)	
+#endif
+
+#ifndef u8
+typedef unsigned char		u8;
+typedef unsigned short		u16;
+typedef unsigned int		u32;
+#endif
+
+#ifndef BIT
+#define BIT(x)	((u32)1 << (x))
+#endif
+
+#ifndef le16_to_cpu //need a general definition for the whole system
+#define cpu_to_le32(x) ((u32)(x))
+#define le32_to_cpu(x) ((u32)(x))
+#define cpu_to_le16(x) ((u16)(x))
+#define le16_to_cpu(x) ((u16)(x))
+#endif
+
+#ifndef IP_FMT
+#define IP_FMT "%d.%d.%d.%d"
+#endif
+
+#ifndef IP_ARG
+#define IP_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3]
+#endif
+
+#ifndef MAC_FMT
+#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+#endif
+
+#ifndef MAC_ARG
+#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
+#endif
+
+#ifndef ETH_ALEN
+#define ETH_ALEN 6
+#endif
+
+#ifndef ethhdr
+struct ethhdr 
+{
+	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
+	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
+	unsigned short	h_proto;		/* packet type ID field	*/
+};
+#endif
+
+#ifndef wowlan_memcpy
+	#define wowlan_memcpy(d, s, n)	rtw_memcpy((void*)(d), ((void*)(s)), (n))
+#endif
+
+#ifndef wowlan_malloc
+	#define wowlan_malloc(sz)	rtw_malloc(sz)
+#endif
+
+#ifndef wowlan_zmalloc
+	#define wowlan_zmalloc(sz)	rtw_zmalloc(sz)
+#endif
+
+#ifndef wowlan_memset
+	#define wowlan_memset(pbuf, c, sz)	rtw_memset(pbuf, c, sz)
+#endif
+
+#ifndef wowlan_mfree
+	#define wowlan_mfree(p, sz)	rtw_mfree(((u8*)(p)), (sz))
+#endif
+
+#ifndef wowlan_memcmp
+	#define wowlan_memcmp(s1, s2, n) rtw_memcmp(((void*)(s1)), ((void*)(s2)), (n))
+#endif
+
+#ifndef wowlan_mdelay_os
+	#define wowlan_mdelay_os(ms) rtw_mdelay_os(ms)
+#endif
+
+/*Mutex services*/
+typedef _mutex _wowlock;
+
+__inline static void _init_wowlock(_wowlock *plock)
+{
+	rtw_mutex_init(plock);
+}
+
+__inline static void _free_wowlock(_wowlock *plock)
+{
+	rtw_mutex_free(plock);
+}
+
+__inline static void _enter_wowlock(_wowlock *plock)
+{
+	rtw_mutex_get(plock);
+}
+
+__inline static void _exit_wowlock(_wowlock *plock)
+{
+	rtw_mutex_put(plock);
+}
+
+/*Timer services*/
+typedef TimerHandle_t _wowTimer;
+#define TMR_AUTO_RELOAD_EN	_TRUE
+#define TMR_AUTO_RELOAD_DIS	_FALSE
+
+__inline static void
+_wowlan_init_timer(_wowTimer *ptimer, void *adapter, TIMER_FUN pfunc,void* cntx, const char *name, u32 auto_reload)
+{
+	*ptimer = rtw_timerCreate(
+				(signed const char *)name, 		// Just a text name, not used by the RTOS kernel. 
+				TIMER_MAX_DELAY,		// Timer Period, not 0
+				auto_reload,		// Whether timer will auto-load themselves when expires
+				cntx,		// Uniq id used to identify which timer expire.. 
+				pfunc		// Timer callback							
+			);
+}
+
+__inline static void 
+_wowlan_set_timer(_wowTimer *ptimer, u32 delay_time_ms)
+{
+	if(rtw_timerChangePeriod(*ptimer, rtw_ms_to_systime(delay_time_ms), TIMER_MAX_DELAY) == _FAIL)
+		WOWLAN_PRINTK("Fail to set timer period");
+}
+
+__inline static void 
+_wowlan_cancel_timer(_wowTimer *ptimer)
+{
+	rtw_timerStop(*ptimer, TIMER_MAX_DELAY);
+}
+
+__inline static void 
+_wowlan_del_timer(_wowTimer *ptimer)
+{
+	rtw_timerDelete(*ptimer, TIMER_MAX_DELAY);
+}
+
+__inline static void *
+_wowlan_get_timer_cntx(_wowTimer timer)
+{
+	return pvTimerGetTimerID(timer);
+}
+
+enum rtw_wowlan_wakeup_reason {
+	RTW_WOWLAN_WAKEUP_BY_PATTERN				= BIT(0),
+	RTW_WOWLAN_WAKEUP_BY_DISCONNECTION			= BIT(1),
+	RTW_WOWLAN_WAKEUP_MAX 						= 0x7FFFFFFF
+}; 
+
+enum rtw_wowlan_cmd_id{
+	RTW_WOWLAN_CMD_ENABLE = 0x01, // enable wowlan service
+	RTW_WOWLAN_CMD_PATTERNS = 0x02, // wowlan pattern setting
+	RTW_WOWLAN_CMD_PROT_OFFLOAD_CONFIG = 0x03, //ARP offload setting
+	RTW_WOWLAN_CMD_GET_STATUS = 0x04, // get rtw_wowlan_status
+	RTW_WOWLAN_CMD_CLEAR_ALL = 0x05, //clear wowlan content
+	RTW_WOWLAN_CMD_KEEPALIVE = 0x06, //for keep alive packet setting
+	RTW_WOWLAN_CMD_MAX = 0xff
+};
+
+#define RTW_WOWLAN_MAX_RX_FILTERS			(5)
+#define RTW_WOWLAN_RX_FILTER_MAX_FIELDS	(8)
+#define RTW_WOWLAN_ID_OFFSET				(100) //to match some application, ID starts from 100
+#define RTW_WOWLAN_MIN_FILTERS_ID			(RTW_WOWLAN_ID_OFFSET)
+#define RTW_WOWLAN_MAX_FILTERS_ID			(RTW_WOWLAN_ID_OFFSET+RTW_WOWLAN_MAX_RX_FILTERS-1)
+
+struct rtw_wowlan_rx_filter_field {
+	u16 offset;
+	u8 len;
+	u8 flags;
+	u8 *mask;
+	u8 *pattern;
+};
+
+struct rtw_wowlan_rx_filter {
+	u8 action;
+	u8 offset;
+	u8 num_fields;
+	struct rtw_wowlan_rx_filter_field fields[RTW_WOWLAN_RX_FILTER_MAX_FIELDS];
+};
+
+#if defined(__IAR_SYSTEMS_ICC__)
+#pragma pack(1)
+#else
+#error "this structure needs to be packed!"
+#endif
+struct rtw_wowlan_status {
+	u32 wakeup_reasons; //record wake up reason
+	u32 filter_id; //record which pattern is matched
+};
+#if defined(__IAR_SYSTEMS_ICC__)
+#pragma pack()
+#else
+#error "this structure needs to be packed!"
+#endif
+
+/**
+ * struct rtw_wowlan_keepalive_packet
+ *
+ * @payload_len: data payload length
+ * @payload: data payload buffer
+ * @data_interval: interval at which to send data packets
+**/
+#define RTW_WOWLAN_MAX_KPALIVE_PKT 3
+#define RTW_WOWLAN_MAX_KPALIVE_PKT_SZ 512
+struct rtw_wowlan_keepalive_packet{
+	u8 packet_id;
+	int payload_len;
+	u8 *payload;
+	u32 data_interval;
+	_wowTimer keepalive_tmr;
+};
+
+struct rtw_wowlan_ops {
+	int (*DevWowlanInit)(void);	
+	int (*DevWowlanEnable)(void);
+	int (*DevWowlanDisable)(void);
+	int (*DevWowlanWakeUp)(void);
+	int (*DevWowlanSleep)(void);
+};
+
+/**
+ * enum rtw_wowlan_proto_offloads - enabled protocol offloads
+ * @RTW_WOWLAN_PROTO_OFFLOAD_ARP: ARP data is enabled
+ */
+enum rtw_wowlan_proto_offloads {
+	RTW_WOWLAN_PROTO_OFFLOAD_ARP	= BIT(0),
+	RTW_WOWLAN_PROTO_OFFLOAD_MAX	= 0x7FFFFFFF
+};
+
+/**
+ * struct rtw_wowlan_proto_offload_common - ARP/NS offload common part
+ * @enabled: enable flags
+ * @remote_ipv4_addr: remote address to answer to (or zero if all)
+ * @host_ipv4_addr: our IPv4 address to respond to queries for
+ * @arp_mac_addr: our MAC address for ARP responses
+ * @reserved: unused
+ */
+struct rtw_wowlan_proto_offload_common{
+	int proto_enabled;
+	u32 remote_ipv4_addr;
+	u32 host_ipv4_addr;
+	u8 host_mac_addr[ETH_ALEN];	
+	u16 reserved;
+};
+
+struct rtw_wowlan {
+	_wowlock wow_mutex;
+	bool enabled;
+	struct rtw_wowlan_status status;
+	struct rtw_wowlan_ops ops;
+	struct rtw_wowlan_proto_offload_common proto;
+	bool proto_offload_enabled;
+	struct rtw_wowlan_rx_filter *rx_filter[RTW_WOWLAN_MAX_RX_FILTERS];
+	bool rx_filter_enabled[RTW_WOWLAN_MAX_RX_FILTERS];/* RX Data filter rule state - enabled/disabled */
+	struct rtw_wowlan_keepalive_packet *tx_keepalive[RTW_WOWLAN_MAX_KPALIVE_PKT];
+	bool tx_keepalive_enabled[RTW_WOWLAN_MAX_KPALIVE_PKT];/* TX keep avlive rule state - enabled/disabled */
+};
+
+#define eqMacAddr(a,b)						( ((a)[0]==(b)[0] && (a)[1]==(b)[1] && (a)[2]==(b)[2] && (a)[3]==(b)[3] && (a)[4]==(b)[4] && (a)[5]==(b)[5]) ? 1:0 )
+#define cpMacAddr(des,src)					((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3],(des)[4]=(src)[4],(des)[5]=(src)[5])
+#define cpIpAddr(des,src)					((des)[0]=(src)[0],(des)[1]=(src)[1],(des)[2]=(src)[2],(des)[3]=(src)[3])
+
+#define RTW_WOWLAN_GET_ARP_PKT_OPERATION(__pHeader) 				ReadEF2Byte( ((u8*)(__pHeader)) + 6)
+#define RTW_WOWLAN_GET_ARP_PKT_SENDER_MAC_ADDR(__pHeader, _val) 	cpMacAddr((u8*)(_val), ((u8*)(__pHeader))+8)
+#define RTW_WOWLAN_GET_ARP_PKT_SENDER_IP_ADDR(__pHeader, _val) 		cpIpAddr((u8*)(_val), ((u8*)(__pHeader))+14)
+#define RTW_WOWLAN_GET_ARP_PKT_TARGET_MAC_ADDR(__pHeader, _val) 	cpMacAddr((u8*)(_val), ((u8*)(__pHeader))+18)
+#define RTW_WOWLAN_GET_ARP_PKT_TARGET_IP_ADDR(__pHeader, _val) 	cpIpAddr((u8*)(_val), ((u8*)(__pHeader))+24)
+
+#define RTW_WOWLAN_SET_ARP_PKT_HW(__pHeader, __Value)  				WriteEF2Byte( ((u8*)(__pHeader)) + 0, __Value)
+#define RTW_WOWLAN_SET_ARP_PKT_PROTOCOL(__pHeader, __Value)  			WriteEF2Byte( ((u8*)(__pHeader)) + 2, __Value)
+#define RTW_WOWLAN_SET_ARP_PKT_HW_ADDR_LEN(__pHeader, __Value)  		WriteEF1Byte( ((u8*)(__pHeader)) + 4, __Value)
+#define RTW_WOWLAN_SET_ARP_PKT_PROTOCOL_ADDR_LEN(__pHeader, __Value)  	WriteEF1Byte( ((u8*)(__pHeader)) + 5, __Value)
+#define RTW_WOWLAN_SET_ARP_PKT_OPERATION(__pHeader, __Value) 		WriteEF2Byte( ((u8*)(__pHeader)) + 6, __Value)
+#define RTW_WOWLAN_SET_ARP_PKT_SENDER_MAC_ADDR(__pHeader, _val) 	cpMacAddr(((u8*)(__pHeader))+8, (u8*)(_val))
+#define RTW_WOWLAN_SET_ARP_PKT_SENDER_IP_ADDR(__pHeader, _val) 		cpIpAddr(((u8*)(__pHeader))+14, (u8*)(_val))
+#define RTW_WOWLAN_SET_ARP_PKT_TARGET_MAC_ADDR(__pHeader, _val) 	cpMacAddr(((u8*)(__pHeader))+18, (u8*)(_val))
+#define RTW_WOWLAN_SET_ARP_PKT_TARGET_IP_ADDR(__pHeader, _val) 		cpIpAddr(((u8*)(__pHeader))+24, (u8*)(_val))
+
+#define RTW_WOWLAN_ARP_PKT_LEN		0x2A
+#define RTW_WOWLAN_ARP_PKT_OPERATION_REQ		0x0100 //arp request
+#define RTW_WOWLAN_ARP_PKT_OPERATION_RSP		0x0200 //arp response
+
+extern u8 key_2char2num(u8 hch, u8 lch);
+extern _LONG_CALL_ void __rtl_memDump_v1_00(const u8 *start, u32 size, char * strHeader);
+#define rtw_wowlan_DumpForBytes(pData, Len) __rtl_memDump_v1_00(pData, Len, NULL)
+
+#define PWOWLAN_TO_STATUS(pwowlan)			(&pwowlan->status)
+#define PWOWLAN_TO_OPS(pwowlan)			(&pwowlan->ops)
+#define PWOWLAN_TO_PROTO(pwowlan)			(&pwowlan->proto)
+#define PWOWLAN_TO_RX_FILTER(pwowlan)		(pwowlan->rx_filter)
+#define PWOWLAN_TO_TX_KEEPALIVE(pwowlan)	(pwowlan->tx_keepalive)
+
+/**
+ * rtw_wowlan_init: initialize wowlan service
+ * arg: None
+ * return: _SUCCESS or _FAIL
+ */
+extern int rtw_wowlan_init(void);
+
+/**
+ * cmd_wowlan_service: input commands to configure wowlan service
+ * arg:
+ * @argc: number of input parameter
+ * @argv: content of input string
+ * return: None
+ */
+extern void cmd_wowlan_service(int argc, char **argv);
+
+/**
+ * rtw_wowlan_process_rx_packet: entry for packet process in wowlan service once it starts
+ * arg: 
+ * @rx_pkt: receive packet from wlan/ethernet 
+ * @pkt_len: receive packet length
+ * return: _SUCCESS or _FAIL
+ */
+extern int rtw_wowlan_process_rx_packet(char *rx_pkt, u16 pkt_len);
+
+/**
+ * rtw_wowlan_wakeup_process: wake up process once the reasons are matched, 
+ *       refer to enum rtw_wowlan_wakeup_reason
+ * arg: 
+ * @reason: wake up reason, refer to enum rtw_wowlan_wakeup_reason  
+ * return: None
+ */
+extern void rtw_wowlan_wakeup_process(int reason);
+
+/**
+ * rtw_wowlan_is_enabled: if wowlan service is already enabled
+ * this function is called in rx path and wifi_inidication when wowlan service is running
+ * arg: None
+ * return: _True if enable or _False if disable
+ */
+extern int rtw_wowlan_is_enabled(void);
+
+/**
+ * rtw_wowlan_get_wk_reason: query wake up reason, refer to enum rtw_wowlan_wakeup_reason
+ * arg: None
+ * return: wakeup_reason
+ */
+extern int rtw_wowlan_get_wk_reason(void);
+
+/**
+ * rtw_wowlan_dev_sleep: sleep process on Ameba side, pull control for example
+ * this function is linked to dev_wowlan_sleep_process() in dev_wowlan.c
+ * arg: None
+ * return: None
+ */
+extern void rtw_wowlan_dev_sleep(void);
+
+#endif

RTL00_SDKV35a/component/common/api/wifi/wifi_conf.c

@@ -178,9 +178,9 @@ typedef struct net_device
 extern struct net_device *rltk_wlan_info;
 void patch_rltk_wlan_deinit(void)
 {
-	struct net_device *v0; // r6@1
-  int v1; // r5@2
-  char *v4; // r7@3
+	struct net_device *v0;
+  int v1;
+  char *v4;
 
   v0 = rltk_wlan_info;
 
@@ -998,7 +998,7 @@ int wifi_rf_off(void)
 //----------------------------------------------------------------------------//
 int wifi_on(rtw_mode_t mode)
 {
-	int ret = 1;
+	int ret = 0;
 //pvvx	int timeout = 20; // 20 sec ??!!
 	int timeout = wifi_test_timeout_ms/wifi_test_timeout_step_ms;
 	int idx;
@@ -1007,7 +1007,7 @@ int wifi_on(rtw_mode_t mode)
 	
 	if(rltk_wlan_running(WLAN0_IDX)) {
 		printf("WIFI is already running\n");
-		return 1;
+		return 0;
 	}
 
 	if(event_init == 0){
@@ -1061,7 +1061,7 @@ int wifi_on(rtw_mode_t mode)
 
 int wifi_off(void)
 {
-	int ret = 0;
+//	int ret = 0;
 //pvvx	int timeout = 20; // 20 sec ??!!
 	int timeout = wifi_test_timeout_ms/10;
 
@@ -1105,7 +1105,7 @@ int wifi_off(void)
 	inic_stop();
 #endif
 
-	return ret;
+	return 1;
 }
 
 int wifi_set_power_mode(unsigned char ips_mode, unsigned char lps_mode)

RTL00_SDKV35a/component/common/application/jd_joinlink/example_joinlink.c

@@ -0,0 +1,675 @@
+/*******************************example_joinlink **************************/
+
+#include "autoconf.h"
+#include "platform_stdlib.h"
+#include "wifi_conf.h"
+#include "wifi_structures.h"
+#include "osdep_service.h"
+#include "lwip_netconf.h"
+#include "task.h"
+#include "joinlink.h"
+#include "cJSON.h"
+
+#include <lwip/sockets.h>
+#include <lwip/raw.h>
+#include <lwip/icmp.h>
+#include <lwip/inet_chksum.h>
+#include <platform/platform_stdlib.h>
+
+#define MASK_SIZE_JOINLINK  3
+#define SOURCE_PORT         101
+
+//gloable 
+static unsigned char cur_channel = 1;                                    
+static unsigned char lock_channel = 1;
+static _timer timer_handler_phase2;
+static _timer timer_handler_phase1;
+static u8 joinlink_finished = 0;
+static u8 security_type = 0xff;
+static u8 jl_rx_flag = 0;
+static rtw_scan_result_t *all_channel_scan_result = NULL;
+static rtw_scan_result_t *p_result = NULL;
+static int all_channel_ret = 0;
+static int phase1_finished = 0;
+static int phase2_started = 0;
+static u32 start_time = 0;
+static u32 current_time = 0;
+static int idx = 1;
+static int phase1_scanned_channel[14];
+static char ap_bssid[6];
+static char aes_key[] = "123456789";
+
+static void* pre_scan_sema;
+static int ack_socket;
+static struct sockaddr_in to_addr;
+static struct sockaddr_in from_addr;
+static char header_cmd[] = "cmd";
+static cJSON *ack_content = NULL;
+extern struct netif xnetif[];
+
+void example_joinlink(void);
+
+static rtw_result_t joinlink_scan_result_handler(rtw_scan_handler_result_t* malloced_scan_result )
+{
+
+	static int ApNum = 0;
+  //TODO: add timer of 2s, wf, 1021
+	if (malloced_scan_result->scan_complete != RTW_TRUE) {
+		rtw_scan_result_t* record = &malloced_scan_result->ap_details;
+		record->SSID.val[record->SSID.len] = 0; /* Ensure the SSID is null terminated */
+		++ApNum;
+		
+		if(malloced_scan_result->user_data)
+			memcpy((void *)((char *)malloced_scan_result->user_data+(ApNum-1)*sizeof(rtw_scan_result_t)), (char *)record, sizeof(rtw_scan_result_t));
+	}
+	// scan finished, wf, 1022 
+	else
+	{
+		rtw_up_sema(&pre_scan_sema);
+		ApNum = 0;
+	}
+	return RTW_SUCCESS;
+}
+
+void* joinlink_all_scan()
+{      
+	int ret = 0;
+	rtw_scan_result_t *joinlink_scan_buf = NULL; 
+	
+	if(joinlink_scan_buf != NULL)
+		free(joinlink_scan_buf);
+		
+	joinlink_scan_buf = (rtw_scan_result_t *)malloc(65*sizeof(rtw_scan_result_t));
+	if(joinlink_scan_buf == NULL){
+		return 0;
+	}
+  memset(joinlink_scan_buf, 0, 65*sizeof(rtw_scan_result_t));
+  
+	if((ret = wifi_scan_networks(joinlink_scan_result_handler, joinlink_scan_buf)) != RTW_SUCCESS){
+		printf("[ATWS]ERROR: wifi scan failed\n\r");
+		free(joinlink_scan_buf);
+		return 0;
+	}	
+	return joinlink_scan_buf;
+}
+
+void joinlink_deinit_content()
+{
+	rtw_del_timer(&timer_handler_phase2);
+	rtw_del_timer(&timer_handler_phase1);
+	if(all_channel_scan_result)
+	{
+		free(all_channel_scan_result);
+		all_channel_scan_result = NULL;
+	}
+	rtw_free_sema(&pre_scan_sema);
+	joinlink_deinit();
+	
+	return;
+}
+static char *jl_itoa(int value)
+{
+	char *val_str;
+	int tmp = value, len = 1;
+
+	while((tmp /= 10) > 0)
+		len ++;
+
+	val_str = (char *) malloc(len + 1);
+	sprintf(val_str, "%d", value);
+
+	return val_str;
+}
+
+static void get_ip_str(int *ip_int, char *ip_ch)
+{ 
+	char *ip_single = NULL;
+	u8 pos = 0, len = 0;
+	
+	for(int i = 0; i < 4; i++)
+	{
+		ip_single = jl_itoa(ip_int[i]);
+		len = strlen(ip_single);
+		memcpy(ip_ch + pos, ip_single,len);
+		free(ip_single);
+		ip_single = NULL;
+		pos += len;
+		if(i == 3) 
+		{
+			*(ip_ch + pos) = 0;
+			break;	
+		}
+		*(ip_ch + pos) = '.';
+		pos++;
+	} 
+}
+
+static int joinlink_set_ack_content(u8 check_sum)
+{
+	cJSON_Hooks memoryHook;
+	memoryHook.malloc_fn = malloc;
+	memoryHook.free_fn = free;
+	cJSON_InitHooks(&memoryHook);
+	
+	if(ack_content != NULL)
+	{
+		cJSON_Delete(ack_content);
+		ack_content = NULL;
+	}
+	if((ack_content = cJSON_CreateObject()) != NULL)
+	{
+		char mac_str[18];
+		u8 pos = 0;
+		memset(mac_str, 0, sizeof(mac_str));
+		for(int i = 0; i < 6; i++)
+		{
+			sprintf(mac_str + pos, "%02x", xnetif[0].hwaddr[i]);
+			pos += 2;
+			if(i != 5)
+				mac_str[pos++] = ':';
+		}
+		
+		cJSON_AddItemToObject(ack_content, "deviceid", cJSON_CreateString(mac_str));
+		cJSON_AddItemToObject(ack_content, "code", cJSON_CreateNumber(check_sum));
+	}
+	else
+	{
+		printf("create jSON object failure\n");
+		return -1;
+	}
+		
+  return 0;
+}
+
+#if 1
+
+static void recv_cmd(void *para)
+{
+	int rev_len = 0;
+	char pkt_buf[16];
+	while(1)
+	{
+		vTaskDelay(500);
+		if((rev_len = recvfrom(ack_socket, pkt_buf, sizeof(pkt_buf), 0, NULL, NULL)) >= 0)
+		{
+			if(memcmp(pkt_buf, header_cmd, sizeof(header_cmd)) == 0)
+			{
+				printf("received reboot command, restart join_link process\n");
+				// do we need to reboot?
+				example_joinlink();
+				close(ack_socket);
+				break;
+			}
+		}		
+	}
+	vTaskDelete(NULL);
+	return;
+}
+
+static int send_ack(int *dest_ip, int dest_port, u8 sum)
+{
+#if CONFIG_LWIP_LAYER
+	int ack_transmit_round;
+	char ip[16];
+	char *jsonString = NULL;
+	int sended_data = 0;
+
+	if(joinlink_set_ack_content(sum) == -1)
+		return -1;
+		
+	jsonString = cJSON_Print(ack_content);
+	if(jsonString == NULL)
+	{
+		printf("json string convert failure\n");
+		cJSON_Delete(ack_content);
+		return -1;
+	}
+	
+	get_ip_str(dest_ip, ip);
+	
+	ack_socket = socket(PF_INET, SOCK_DGRAM, IP_PROTO_UDP);
+	if (ack_socket == -1) {
+		printf("create socket failure\n");
+		return 	-1;
+	}
+	
+	FD_ZERO(&to_addr);
+	to_addr.sin_family = AF_INET;
+	to_addr.sin_port = htons(dest_port);
+	to_addr.sin_addr.s_addr = htonl(INADDR_ANY);
+	
+	FD_ZERO(&from_addr);
+	from_addr.sin_family = AF_INET;
+	from_addr.sin_port = htons(SOURCE_PORT);
+	to_addr.sin_addr.s_addr = inet_addr(ip);
+	
+	if(bind(ack_socket, (struct sockaddr *)&from_addr, sizeof(from_addr)) < 0)
+	{
+		printf("bind to source port error\n");
+		return -1;
+	}
+
+	for (ack_transmit_round = 0; ack_transmit_round < 5; ack_transmit_round++) {
+		sended_data = sendto(ack_socket, (unsigned char *)jsonString, strlen(jsonString), 0, (struct sockaddr *) &to_addr, sizeof(struct sockaddr));
+		//printf("\r\nAlready send %d bytes data\n", sended_data);
+		vTaskDelay(100);	/* delay 100 ms */		
+	}
+	
+	if(xTaskCreate(recv_cmd, (char const *)"recv_cmd", 1512, NULL, tskIDLE_PRIORITY + 2, NULL) != pdPASS)
+		printf("%s xTaskCreate failed\n", __FUNCTION__);
+		
+	close(ack_socket);
+	if(jsonString) 
+	{
+		free(jsonString);
+		jsonString = NULL;
+	}
+	cJSON_Delete(ack_content);
+#endif
+
+	return 0;	
+}
+#endif
+static void remove_filter()
+{
+	wifi_disable_packet_filter(1);
+	wifi_disable_packet_filter(2);
+	wifi_remove_packet_filter(1);
+	wifi_remove_packet_filter(2);
+}
+
+int joinlink_finish(unsigned char security_type)
+{
+	int ret = 0;
+	int retry = 3;
+	unsigned char pscan_config = 1;
+	joinlink_result_t result;
+	rtw_security_t security_mode;
+	
+	wifi_set_promisc(RTW_PROMISC_DISABLE,NULL,0);
+	remove_filter();
+	
+	pscan_config = PSCAN_ENABLE | PSCAN_SIMPLE_CONFIG;
+	ret = joinlink_get_result(&result);
+	if (ret == 0) {
+		printf("get result OK\n");
+		//printf("\r\n joinlink get result ok,ssid = %s, pwd = %s,ssid length = %d,pwd length = %d",
+		//	       result.ssid, result.pwd, result.ssid_length,result.pwd_length);
+	}
+	else{
+		printf("joinlink result not get!\n");
+		joinlink_deinit_content();
+		return -1;
+	}
+	//ap security type
+	switch(security_type){
+	case RTW_ENCRYPTION_OPEN:
+		security_mode = RTW_SECURITY_OPEN;
+		break;
+	case RTW_ENCRYPTION_WEP40:
+	case RTW_ENCRYPTION_WEP104:
+		security_mode = RTW_SECURITY_WEP_PSK;
+		break;
+	case RTW_ENCRYPTION_WPA_TKIP:
+	case RTW_ENCRYPTION_WPA_AES:
+	case RTW_ENCRYPTION_WPA2_TKIP:
+	case RTW_ENCRYPTION_WPA2_AES:
+	case RTW_ENCRYPTION_WPA2_MIXED:
+		security_mode = RTW_SECURITY_WPA2_AES_PSK;
+		break;
+	case RTW_ENCRYPTION_UNKNOWN:
+	case RTW_ENCRYPTION_UNDEF:
+	default:
+		printf("unknow security mode,connect fail!\n");
+	}
+
+#if 1
+	while(1){
+		if(wifi_set_pscan_chan(&lock_channel, &pscan_config, 1) < 0){
+			printf("ERROR: wifi set partial scan channel fail\n");
+			break;
+		}
+		printf("wifi_connect\n");
+		//printf("ap_bssid: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n", ap_bssid[0],ap_bssid[1],ap_bssid[2],ap_bssid[3],ap_bssid[4],ap_bssid[5]);
+
+
+		ret = wifi_connect((unsigned char *)result.ssid, security_mode, 
+				   (unsigned char *)result.pwd, result.ssid_length, 
+				   result.pwd_length, 
+				   0,NULL);			   
+				   
+		if(ret == RTW_SUCCESS){
+			printf("Connect ok!\n");
+#if CONFIG_LWIP_LAYER
+			/* If not rise priority, LwIP DHCP may timeout */
+			vTaskPrioritySet(NULL, tskIDLE_PRIORITY + 3);	
+			/* Start DHCP Client */
+			ret = LwIP_DHCP(0, DHCP_START);
+			vTaskPrioritySet(NULL, tskIDLE_PRIORITY + 1);	
+#endif
+			break;
+		}
+	  if (retry == 0) {
+			break;
+		}
+		
+		retry--;
+	}	
+	if(send_ack(result.source_ip, result.source_port, result.sum) != 0)
+		printf("send ack failure\n");
+#endif	
+	
+	joinlink_deinit_content();
+	return 0;
+	
+}
+// handler for phase2
+void timer_handler_phase2_func(void *FunctionContext)
+{
+	// do not switch channel while handle frames, wf, 1021
+	if(jl_rx_flag){
+		rtw_set_timer(&timer_handler_phase2, CHANNEL_SWITCH_TIME - 25);
+	} else {
+		if(cur_channel >= 13)
+			{cur_channel = 1;}
+		else
+			cur_channel ++;
+		wifi_set_channel(cur_channel);
+		rtw_set_timer(&timer_handler_phase2, CHANNEL_SWITCH_TIME);
+	}
+	
+	//printf("phase2:wifi switch channel to %d\n",cur_channel);
+	return;
+}
+
+// timer handler for the 1st phase, wf, 1022
+void timer_handler_phase1_func(void *FunctionContext)
+{
+	// do not switch channel while handle frames, wf, 1021
+	if(jl_rx_flag){
+		rtw_set_timer(&timer_handler_phase1, SSID_SWITCH_TIME - 25);
+	}
+	// switch ssid, wf, 1022 
+	else 
+	{
+		if(idx >= 14)
+    {
+    	phase1_finished = 1;
+    	printf("wifi: phase1 scan finished\n");
+    	printf("wifi: start phase2 scan\n");
+// move from pkt handler to here in case no pkt to trigue phase2
+#if 1
+		if(phase1_finished)
+		{
+			phase1_finished = 0;
+			phase2_started = 1;
+			rtw_cancel_timer(&timer_handler_phase1);
+			//start phase2 for ch1~ch13
+			cur_channel = 1;	
+			wifi_set_channel(cur_channel);
+			
+		  rtw_init_timer(&timer_handler_phase2, NULL, &timer_handler_phase2_func, NULL, "phase_2");
+		  rtw_set_timer(&timer_handler_phase2, CHANNEL_SWITCH_TIME);					
+		}
+#endif
+    	return;
+    }
+    
+    while(idx < 14)
+    {
+      if(phase1_scanned_channel[idx])
+      {
+      	wifi_set_channel(idx);
+   			rtw_set_timer(&timer_handler_phase1, SSID_SWITCH_TIME);
+      	//printf("phase1: wifi switch channel to %d\n",idx);
+      	idx++;
+      	break;      	
+      }
+      else
+      {
+      	if(idx == 13)
+      		rtw_set_timer(&timer_handler_phase1, SSID_SWITCH_TIME);
+      	idx++;
+      }
+
+    }
+
+	}
+	return;
+}
+
+static void rtl_frame_recv_handle(unsigned char *buf, int len, unsigned char *da, unsigned char *sa, void *user_data) {
+	
+	int ret = 0;
+	int fixed_channel;
+	char scanned_ssid[50] = {0};
+	unsigned char *current_bssid = NULL;
+	int scanned_ssid_len = 0;
+	
+	//set this flag prevent joinlink_recv interruptted by timer,since timer has higher priority
+	jl_rx_flag = 1;
+	if (joinlink_finished) {
+		jl_rx_flag = 0;
+		return;
+	}
+
+	ret = joinlink_recv(da, sa, len, user_data);
+	if(ret == JOINLINK_STATUS_CHANNEL_LOCKED)
+	{
+		if(phase2_started)
+		{
+			phase2_started = 0;
+      rtw_cancel_timer(&timer_handler_phase2);			
+		}
+		else
+			rtw_cancel_timer(&timer_handler_phase1);
+			  
+		lock_channel = cur_channel;
+		security_type = ((ieee80211_frame_info_t *)user_data)->encrypt;
+		printf("JoinLink locked to channel[%d]\n",lock_channel);
+		
+		current_bssid = buf + 4 + ETH_ALEN;
+		memcpy(ap_bssid, current_bssid, 6);
+		
+		fixed_channel = promisc_get_fixed_channel(current_bssid, scanned_ssid, &scanned_ssid_len);
+		if (fixed_channel != 0) {
+			printf("JoinLink force fixed to channel[%d]\r\n",fixed_channel);
+			printf("JoinLink ssid scanned[%s]\r\n",scanned_ssid);
+			wifi_set_channel(fixed_channel);
+		}
+		
+	}
+	else if(ret == JOINLINK_STATUS_COMPLETE){
+		//wifi_set_promisc(RTW_PROMISC_DISABLE,NULL,0);
+		joinlink_finished = 1;
+		printf("quit promisc mode!\r\n");
+	} 
+	//release flag
+	jl_rx_flag = 0;
+	
+	return;
+}
+
+
+// callback for promisc packets, like rtk_start_parse_packet in SC, wf, 1021
+void wifi_promisc_rx(unsigned char* buf, unsigned int len, void* user_data)
+{
+	unsigned char * da = buf;
+	unsigned char * sa = buf + ETH_ALEN;
+	
+	if (joinlink_finished)
+		return;
+	
+	rtl_frame_recv_handle(buf, len, da, sa, user_data);
+	return;
+	
+}
+
+// the entry point for joinlink
+void joinlink_process(void *param)
+{
+	 
+	while(1)
+	{
+		current_time = xTaskGetTickCount();
+		
+		if(joinlink_finished)
+		{
+			printf("joinlink finished\n");
+			break;
+		}
+		
+		if((current_time - start_time) > JOINLINK_TIME * configTICK_RATE_HZ)
+		{
+			printf("joinlink timeout\n");
+			break;
+		}
+		
+		vTaskDelay(500);
+	}
+
+	joinlink_finish(security_type);
+		
+	vTaskDelete(NULL);
+	return;
+}
+
+int joinlink_init_content()
+{
+	
+	int ret = 0;
+	ret = joinlink_init();
+	if(ret < 0){
+		printf("JoinLink init failed!\n");
+		return ret;
+	}
+	memset(phase1_scanned_channel, 0, sizeof(phase1_scanned_channel));
+  security_type = 0xff;
+  cur_channel = 1;
+  lock_channel = 1;
+  joinlink_finished = 0;
+  jl_rx_flag = 0;
+  p_result = NULL;
+  all_channel_ret = 0;
+  phase1_finished = 0;
+  phase2_started = 0;
+  idx = 1;
+  rtw_init_sema(&pre_scan_sema, 0);
+  memset(ap_bssid, 0, sizeof(ap_bssid));
+  set_aes_key(aes_key, sizeof(aes_key) - 1);
+	
+	return 0;
+}
+
+// ret:1 indicate suc, else fail
+int scan_all_channel()
+{
+	all_channel_scan_result = (rtw_scan_result_t *)joinlink_all_scan();
+
+	if(all_channel_scan_result == NULL)
+		return 0;
+	else
+		return 1;	
+			
+}
+
+void get_phase1_channel()
+{
+	p_result = all_channel_scan_result;
+	while(p_result->channel)
+	{
+		if((p_result->channel >= 1) && (p_result->channel <= 13))
+			phase1_scanned_channel[p_result->channel] = 1;
+		p_result++;
+	}
+  return;
+}
+
+// now only accept mcast and bcast pkt
+static void filter_add_enable()
+{
+	u8 mask[MASK_SIZE_JOINLINK]={0xFF,0xFF,0xFF};
+	u8 pattern[MASK_SIZE_JOINLINK]={0x01,0x00,0x5e};
+	u8 pattern_bcast[MASK_SIZE_JOINLINK]={0xff,0xff,0xff};
+	
+	rtw_packet_filter_pattern_t packet_filter;
+	rtw_packet_filter_pattern_t packet_filter_bcast;
+	rtw_packet_filter_rule_e rule;
+
+	packet_filter.offset = 0;
+	packet_filter.mask_size = 3;
+	packet_filter.mask = mask;
+	packet_filter.pattern = pattern;
+	
+	packet_filter_bcast.offset = 0;
+	packet_filter_bcast.mask_size = 3;
+	packet_filter_bcast.mask = mask;
+	packet_filter_bcast.pattern = pattern_bcast;
+	
+	rule = RTW_POSITIVE_MATCHING;
+
+	wifi_init_packet_filter();
+	wifi_add_packet_filter(1, &packet_filter,rule);
+	wifi_add_packet_filter(2, &packet_filter_bcast,rule);
+		
+	wifi_enable_packet_filter(1);
+	wifi_enable_packet_filter(2);
+}
+
+
+void joinlink_start(void *param)
+{
+	joinlink_finished = 0;
+	start_time = xTaskGetTickCount();
+	
+	if(xTaskCreate(joinlink_process, (char const *)"JoinLink", 1512, NULL, tskIDLE_PRIORITY + 2, NULL) != pdPASS)
+		printf("%s xTaskCreate failed\n", __FUNCTION__);
+	
+	if (joinlink_init_content() < 0)
+		printf("joinlink init fail!\n");
+	while(1)
+	{
+		if(wifi_is_ready_to_transceive(RTW_STA_INTERFACE) == RTW_SUCCESS)
+			break;
+		else
+			vTaskDelay(3000);
+	}
+  all_channel_ret = scan_all_channel(); 
+  
+	if (rtw_down_sema(&pre_scan_sema) == _FAIL)
+	  printf("%s, Take Semaphore Fail\n", __FUNCTION__);
+    
+  //printf("\npre scan finished\n");
+
+	//set wifi to station mode,enable promisc mode and timer to change channel
+	wifi_enter_promisc_mode();
+	filter_add_enable();
+	
+	/* enable all 802.11 packets*/
+	wifi_set_promisc(RTW_PROMISC_ENABLE, wifi_promisc_rx, 1);	
+		
+	//init timer handler,and set timer hanler funcion
+	if(all_channel_ret)
+	{
+		printf("\nstart the phase1 scan\n");
+		get_phase1_channel();
+		rtw_init_timer(&timer_handler_phase1, NULL, &timer_handler_phase1_func, NULL, "phase1_timer");
+		rtw_set_timer(&timer_handler_phase1, SSID_SWITCH_TIME);			
+	}
+	else
+	{
+		printf("phase1 scan fail, start phase2 scan\n");
+	  rtw_init_timer(&timer_handler_phase2, NULL, &timer_handler_phase2_func, NULL, "phase2_timer");
+ 	  wifi_set_channel(cur_channel);
+	  rtw_set_timer(&timer_handler_phase2, CHANNEL_SWITCH_TIME);	
+	}
+
+	vTaskDelete(NULL);
+	return;
+}
+
+void example_joinlink(void)
+{
+	if(xTaskCreate(joinlink_start, (char const *)"JoinLink_entry", 1512, NULL, tskIDLE_PRIORITY + 2, NULL) != pdPASS)
+		printf("%s xTaskCreate failed\n", __FUNCTION__);	
+}

RTL00_SDKV35a/component/common/application/jd_joinlink/joinlink.h

@@ -0,0 +1,64 @@
+/******************************* joinlink **************************/
+#ifndef __JOINLINK_H
+#define __JOINLINK_H
+
+#include "autoconf.h"
+#include "platform_stdlib.h"
+#include "wifi_conf.h"
+#include "wifi_structures.h"
+#include "osdep_service.h"
+#include "lwip_netconf.h"
+#include "task.h"
+#include "hal_crypto.h"
+
+#define SSID_SWITCH_TIME    500  //ssid switch time in phase1,units:ms, 50
+#define CHANNEL_SWITCH_TIME 500	//channel switch time in phase2,units:ms, 50
+#define JOINLINK_TIME       120  //timeout for joinlink process, units: s
+
+/*
+ * store AP profile after successfully decode
+ * SUM +£¨length£¬pass£©+£¨IP+Port£©+£¨length£¬SSID)
+ */
+typedef struct
+{
+	unsigned char sum;
+	unsigned char pwd_length;
+	char pwd[65];						
+  int source_ip[4];
+  unsigned int source_port;
+  unsigned char ssid_length;
+	char ssid[65];						
+} joinlink_result_t;
+
+/*
+ * return value of joinlink_recv()
+ */
+typedef enum
+{
+	JOINLINK_STATUS_CONTINUE = 0,
+	JOINLINK_STATUS_CHANNEL_LOCKED = 1,
+	JOINLINK_STATUS_COMPLETE = 2
+} joinlink_status_t;
+
+//initialize the related data structure
+int joinlink_init();
+/*
+  handler to decode pkt
+ */
+joinlink_status_t joinlink_recv(unsigned char *da, unsigned char *sa, int len, void *user_data);
+
+/*
+ * get the AP profile after decode
+ */
+int joinlink_get_result(joinlink_result_t *result);
+
+/*
+ * set the aes_key, the max len should be 16
+ * ret 1: success; ret 0: the len is invalid;
+ */ 
+int set_aes_key(char *key, int len);
+
+// call this after finish join_link process
+void joinlink_deinit();
+
+#endif //__JOINLINK_H	

RTL00_SDKV35a/component/common/audio/g711_codec.h

@@ -0,0 +1,24 @@
+#ifndef _G711_CODEC_H
+#define _G711_CODEC_H
+#include "basic_types.h"
+
+typedef enum {
+	I2S_MODE_UNKNOWN = -1,
+	I2S_MODE_G711A = 1,
+	I2S_MODE_G711U = 2 
+}I2S_mode;
+
+typedef struct {
+	I2S_mode mode;	//intend to encode as G711A or G711U
+	int len;	//data length
+//	_sema RWSema;
+	unsigned char *raw_data;	//address of buffered data (not encoded
+	int data_start; // a shift value to show where the data starts
+	int data_end;	// a shift value shows data ending
+}i2s_buf_context;
+
+//void encoder_init(int mode);
+int G711_encoder(short *source, unsigned char *des, int mode, int size);
+int G711_decoder(unsigned char *source, short *des, int mode, int size);
+int mono2stereo(unsigned char *src, unsigned char *dst, int size, int wl);
+#endif

RTL00_SDKV35a/component/common/drivers/i2s/alc5651.c

@@ -0,0 +1,196 @@
+#include <stdio.h>
+#include "PinNames.h"
+#include "basic_types.h"
+#include "diag.h" 
+#include <osdep_api.h>
+
+#include "i2c_api.h"
+#include "pinmap.h"
+
+//#define I2C_MTR_SDA			PC_4//PB_3
+//#define I2C_MTR_SCL			PC_5//PB_2
+#define I2C_MTR_SDA			PB_3
+#define I2C_MTR_SCL			PB_2
+#define I2C_BUS_CLK			100000  //hz
+
+#define I2C_ALC5651_ADDR	(0x34/2)
+
+#define RT5651_PRIV_INDEX	0x6a
+#define RT5651_PRIV_DATA	0x6c
+	 
+#if defined (__ICCARM__)
+i2c_t   alc5651_i2c;
+#else
+volatile i2c_t   alc5651_i2c;
+#define printf  DBG_8195A
+#endif
+
+static void alc5651_delay(void)
+{
+    int i;
+
+	i=10000;
+    while (i) {
+        i--;
+        asm volatile ("nop\n\t");
+    }
+}
+
+void alc5651_reg_write(unsigned int reg, unsigned int value)
+{
+	char buf[4];
+	buf[0] = (char)reg;
+	buf[1] = (char)(value>>8);
+	buf[2] = (char)(value&0xff);
+	
+	i2c_write(&alc5651_i2c, I2C_ALC5651_ADDR, &buf[0], 3, 1);
+	alc5651_delay();
+}
+
+void alc5651_reg_read(unsigned int reg, unsigned int *value)
+{
+	int tmp;
+	char *buf = (char*)&tmp;	
+	
+	buf[0] = (char)reg;
+	i2c_write(&alc5651_i2c, I2C_ALC5651_ADDR, &buf[0], 1, 1);
+	alc5651_delay();
+	
+	buf[0] = 0xaa;
+	buf[1] = 0xaa;
+	
+	i2c_read(&alc5651_i2c, I2C_ALC5651_ADDR, &buf[0], 2, 1);
+	alc5651_delay();
+	
+	*value= ((buf[0]&0xFF)<<8)|(buf[1]&0xFF); 
+}
+
+void alc5651_index_write(unsigned int reg, unsigned int value)
+{
+	alc5651_reg_write(RT5651_PRIV_INDEX, reg);
+	alc5651_reg_write(RT5651_PRIV_DATA, value);
+}
+
+void alc5651_index_read(unsigned int reg, unsigned int *value)
+{
+	alc5651_reg_write(RT5651_PRIV_INDEX, reg);
+	alc5651_reg_read(RT5651_PRIV_DATA, value);
+}
+
+void alc5651_reg_dump(void)
+{
+	int i;
+	unsigned int value;
+  
+	printf("alc5651 codec reg dump\n\r");
+	printf("------------------------\n\r");
+	for(i=0;i<=0xff;i++){
+		alc5651_reg_read(i, &value);
+		printf("%02x : %04x\n\r", i, (unsigned short)value);
+	}
+	printf("------------------------\n\r");
+}
+
+void alc5651_index_dump(void)
+{
+	int i;
+	unsigned int value;
+  
+	printf("alc5651 codec index dump\n\r");
+	printf("------------------------\n\r");
+	for(i=0;i<=0xff;i++){
+		alc5651_index_read(i, &value);
+		printf("%02x : %04x\n\r", i, (unsigned short)value);
+	}
+	printf("------------------------\n\r");
+}
+
+void alc5651_init(void)
+{
+    i2c_init(&alc5651_i2c, I2C_MTR_SDA, I2C_MTR_SCL);
+    i2c_frequency(&alc5651_i2c, I2C_BUS_CLK);
+}
+
+void alc5651_set_word_len(int len_idx)	// interface2
+{
+	// 0: 16 1: 20 2: 24 3: 8
+	unsigned int val;
+	alc5651_reg_read(0x71,&val);
+	val &= (~(0x3<<2));
+	val |= (len_idx<<2);
+	alc5651_reg_write(0x71,val);
+	alc5651_reg_read(0x70,&val);
+	val &= (~(0x3<<2));
+	val |= (len_idx<<2);
+	alc5651_reg_write(0x70,val);	
+	
+}
+
+void alc5651_init_interface1(void)
+{
+    alc5651_reg_write(0x00,0x0021);
+    alc5651_reg_write(0x63,0xE8FE);
+    alc5651_reg_write(0x61,0x5800);
+    alc5651_reg_write(0x62,0x0C00);
+    alc5651_reg_write(0x73,0x0000);
+    alc5651_reg_write(0x2A,0x4242);
+    alc5651_reg_write(0x45,0x2000);
+    alc5651_reg_write(0x02,0x4848);
+    alc5651_reg_write(0x8E,0x0019);
+    alc5651_reg_write(0x8F,0x3100);
+    alc5651_reg_write(0x91,0x0E00);
+    alc5651_index_write(0x3D,0x3E00);
+    alc5651_reg_write(0xFA,0x0011);
+    alc5651_reg_write(0x83,0x0800);
+    alc5651_reg_write(0x84,0xA000);
+    alc5651_reg_write(0xFA,0x0C11);
+    alc5651_reg_write(0x64,0x4010);
+    alc5651_reg_write(0x65,0x0C00);
+    alc5651_reg_write(0x61,0x5806);
+    alc5651_reg_write(0x62,0xCC00);
+    alc5651_reg_write(0x3C,0x004F);
+    alc5651_reg_write(0x3E,0x004F);
+    alc5651_reg_write(0x27,0x3820);
+    alc5651_reg_write(0x77,0x0000);	
+}
+
+void alc5651_init_interface2(void)
+{
+  	int reg_value=0;
+    alc5651_reg_write(0x00,0x0021);//reset all, device id 1
+	alc5651_reg_write(0x63,0xE8FE);//Power managerment control 3: 
+	//VREF1&2 on, both slow VREF, MBIAS on, MBIAS bandcap power on, L & R HP Amp on, improve HP Amp driving enabled
+	alc5651_reg_write(0x61,0x5800);//power managerment control 1:
+	//I2S2 digital interface on, Analog DACL1 & DACR1 on. 
+    alc5651_reg_write(0x62,0x0C00);//stereo1 & 2 DAC filter power on
+	alc5651_reg_write(0x73,0x0000);//ADC/DAC Clock control 1:
+	//I2S Clock Pre-Divider 1 & 2: /1.  Stereo DAC Over Sample Rate : 128Fs
+    alc5651_reg_write(0x2A,0x4242);//Stereo DAC digital mixer control
+	//Un-mute DACL2 to Stereo DAC Left & Right Mixer
+	alc5651_reg_write(0x45,0x2000);//HPOMIX: Un-mute DAC1 to HPOMIX
+	alc5651_reg_write(0x02,0x4848);//HP Output Control:
+	//Unmute HPOL, HPOR
+//    alc5651_reg_write(0x0F,0x1F1F);//INL & INR Volume Control
+//    alc5651_reg_write(0x0D,0x0800);//IN1/2 Input Control
+//    alc5651_reg_write(0x1C,0x7F7F);//Stereo1 ADC Digital Volume Control
+//    alc5651_reg_write(0x1E,0xF000);// ADC Digital Boost Gain Control
+    alc5651_reg_write(0x8E,0x0019);//HP Amp Control 1
+//	Enable HP Output, Charge Pump Power On, HP Amp All Power On
+    alc5651_reg_write(0x8F,0x3100);//HP Amp Control 2, HP Depop Mode 2
+    alc5651_reg_write(0x91,0x0E00);//HP Amp Control 3, select HP capless power mode
+    alc5651_index_write(0x3D,0x3E00);//unknown
+    alc5651_reg_write(0xFA,0x0011);//enable input clock
+    alc5651_reg_write(0x83,0x0800);//default ASRC control 1
+	alc5651_reg_write(0x84,0xA000);//ASRC control 2: I2S1 enable ASRC mode, Sterol1 DAC filter ASRC mode. 
+//	alc5651_reg_write(0xFA,0x0C11);//?  ?  ?  MX-FAh[15:4]reserved
+	alc5651_reg_write(0x64,0x4010);//power managerment control 4: 
+	//MIC BST2 Power On; MIC2 SE Mode single-end mode or line-input mode
+	alc5651_reg_write(0x65,0x0C00);//power managerment control 5:  RECMIX L & R power on
+	alc5651_reg_write(0x61,0x5806);//power managerment control 1: 
+//	I2S2 Digital Interface On, Analog DACL1, DACR1 power on; Analog ADCL, ADCR power on
+	alc5651_reg_write(0x62,0xCC00);//power managerment control 2: Stereo1&2 ADC/DAC digital filter power on
+    alc5651_reg_write(0x3C,0x004F);//RECMIXL
+    alc5651_reg_write(0x3E,0x004F);//RECMIXR
+	alc5651_reg_write(0x28,0x3030);//stereo2 ADC digital mixer control : Mute Stereo2 ADC L&R channel, ADCR
+	alc5651_reg_write(0x2F,0x0080);	//Interface DAC/ADC Data control: Select IF2 ADCDAT Data Source IF1_ADC2 
+}

RTL00_SDKV35a/component/common/drivers/usb_class/device/class/ethernet/inc/eth_debug.h

@@ -0,0 +1,22 @@
+#ifndef _ETH_DEBUG_H_
+#define _ETH_DEBUG_H_
+
+#define ETH_DEBUG       0
+
+#if ETH_DEBUG
+#define ETH_PRINT(fmt, args...)		            printf("\n\r[%s]%s: " fmt, __FUNCTION__, ## args)
+#define ETH_ERROR(fmt, args...)		            printf("\n\r[%s]%s: " fmt, __FUNCTION__, ## args)
+#define ETH_WARM(fmt, args...)		            printf("\n\r[%s]%s: " fmt, __FUNCTION__, ## args)
+#define FUN_ENTER                                   printf("\n\r[%s ==>]\n", __func__)
+#define FUN_EXIT                                    printf("\n\r[%s <==]\n", __func__)
+#define FUN_TRACE                                   printf("\n\r[%s]:%d \n", __func__, __LINE__)
+#else
+#define ETH_PRINT(fmt, args...)
+#define ETH_ERROR(fmt, args...)		            printf("\n\r%s: " fmt,__FUNCTION__, ## args)
+#define ETH_WARM(fmt, args...)
+#define FUN_ENTER
+#define FUN_EXIT
+#define FUN_TRACE
+#endif
+
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/device/class/ethernet/inc/usb_ethernet.h

@@ -0,0 +1,358 @@
+/*
+ * Ethernet gadget driver -- with CDC and non-CDC options
+ * Builds on hardware support for a full duplex link.
+ *
+ * CDC Ethernet is the standard USB solution for sending Ethernet frames
+ * using USB.  Real hardware tends to use the same framing protocol but look
+ * different for control features.  This driver strongly prefers to use
+ * this USB-IF standard as its open-systems interoperability solution;
+ * most host side USB stacks (except from Microsoft) support it.
+ *
+ * There's some hardware that can't talk CDC.  We make that hardware
+ * implement a "minimalist" vendor-agnostic CDC core:  same framing, but
+ * link-level setup only requires activating the configuration.
+ * Linux supports it, but other host operating systems may not.
+ * (This is a subset of CDC Ethernet.)
+ *
+ * A third option is also in use.  Rather than CDC Ethernet, or something
+ * simpler, Microsoft pushes their own approach: RNDIS.  The published
+ * RNDIS specs are ambiguous and appear to be incomplete, and are also
+ * needlessly complex.
+ */
+#ifndef __USB_ETHERNET_H
+#define __USB_ETHERNET_H
+
+#include "usb.h"
+#include "usb_gadget.h"
+#include "core/inc/usb_composite.h"
+
+//#define DRIVER_DESC		"Ethernet Gadget"
+#define DRIVER_DESC		"USB Network Interface"
+#define DRIVER_VERSION		"May Day 2015"
+#define ETH_ADDR        "00E04C8196C8"
+
+static const char shortname [] = "ether";
+static const char driver_desc [] = DRIVER_DESC;
+
+#define CONFIG_USB_ETH_RNDIS 1
+
+
+#define RNDIS_VENDOR_NUM	ULINKER_ETHER_VID
+#define RNDIS_PRODUCT_NUM	ULINKER_ETHER_PID
+
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ * It's for devices with only CDC Ethernet configurations.
+ */
+#define CDC_VENDOR_NUM	0x0525		/* NetChip */
+#define CDC_PRODUCT_NUM	0xa4a1		/* Linux-USB Ethernet Gadget */
+
+/* USB DRIVER HOOKUP (to the hardware driver, below us), mostly
+ * ep0 implementation:  descriptors, config management, setup().
+ * also optional class-specific notification interrupt transfer.
+ */
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full) configuration
+ * descriptors are built on demand.  For now we do either full CDC, or
+ * our simple subset, with RNDIS as an optional second configuration.
+ *
+ * RNDIS includes some CDC ACM descriptors ... like CDC Ethernet.  But
+ * the class descriptors match a modem (they're ignored; it's really just
+ * Ethernet functionality), they don't need the NOP altsetting, and the
+ * status transfer endpoint isn't optional.
+ */
+
+#define STRING_MANUFACTURER		1
+#define STRING_PRODUCT			2
+#define STRING_ETHADDR			3
+#define STRING_DATA			4
+#define STRING_CONTROL			5
+#define STRING_RNDIS_CONTROL		6
+#define STRING_CDC			7
+#define STRING_SUBSET			8
+#define STRING_RNDIS			9
+#define STRING_SERIALNUMBER		10
+
+/* holds our biggest descriptor (or RNDIS response) */
+#define USB_BUFSIZ	256
+
+#define BUFSIZ_IN	512
+#define BUFSIZ_OUT	512
+/*
+ * This device advertises one configuration, eth_config, unless RNDIS
+ * is enabled (rndis_config) on hardware supporting at least two configs.
+ *
+ * NOTE:  Controllers like superh_udc should probably be able to use
+ * an RNDIS-only configuration.
+ *
+ * FIXME define some higher-powered configurations to make it easier
+ * to recharge batteries ...
+ */
+
+//#define DEV_CONFIG_VALUE	1	/* cdc or subset */
+//#define DEV_RNDIS_CONFIG_VALUE	2	/* rndis; optional */
+#define DEV_CONFIG_VALUE	2	/* cdc or subset */
+#define DEV_RNDIS_CONFIG_VALUE	1	/* rndis; optional */
+
+
+#define	DEVSPEED	USB_SPEED_HIGH
+
+
+/* descriptors that are built on-demand */
+
+static char				manufacturer [50];
+static char				product_desc [40] = DRIVER_DESC;
+static char				serial_number [20];
+
+
+/* address that the host will use ... usually assigned at random */
+//ModifiedByJD    static char				ethaddr [2 * ETH_ALEN + 1];
+static char				ethaddr [2 * 6 + 1] = ETH_ADDR;
+
+/* static strings, in UTF-8 */
+static struct usb_string		strings [] = {
+	{ STRING_MANUFACTURER,	manufacturer, },
+	{ STRING_PRODUCT,	product_desc, },
+	{ STRING_SERIALNUMBER,	serial_number, },
+	{ STRING_DATA,		"Ethernet Data", },
+#if 1//def	DEV_CONFIG_CDC//ModifiedByJD    
+	{ STRING_CDC,		"CDC Ethernet", },
+	{ STRING_ETHADDR,	ethaddr, },
+	{ STRING_CONTROL,	"CDC Communications Control", },
+#endif
+#if 1//def	DEV_CONFIG_SUBSET//ModifiedByJD    
+	{ STRING_SUBSET,	"CDC Ethernet Subset", },
+#endif
+#if 1//def	CONFIG_USB_ETH_RNDIS//ModifiedByJD    
+	{ STRING_RNDIS,		"RNDIS", },
+	{ STRING_RNDIS_CONTROL,	"RNDIS Communications Control", },
+#endif		/* end of list */
+};
+
+static struct usb_gadget_strings	stringtab = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab,
+	NULL,
+};
+
+static struct usb_device_descriptor
+device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	.bcdUSB =		    (0x0200),
+
+	.bDeviceClass =		USB_CLASS_COMM,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
+
+	.idVendor =		(CDC_VENDOR_NUM),
+	.idProduct =		(CDC_PRODUCT_NUM),
+	.iManufacturer =	STRING_MANUFACTURER,
+	.iProduct =		STRING_PRODUCT,
+	.bNumConfigurations =	1,
+};
+
+static struct usb_config_descriptor
+eth_config = {
+	.bLength =		sizeof eth_config,
+	.bDescriptorType =	USB_DT_CONFIG,
+
+	/* compute wTotalLength on the fly */
+	.bNumInterfaces =	1,
+	.bConfigurationValue =	DEV_CONFIG_VALUE,
+	.iConfiguration =	STRING_CDC,
+	.bmAttributes =		USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+	.bMaxPower =		50,
+};
+
+static struct usb_otg_descriptor
+otg_descriptor = {
+	.bLength =		sizeof otg_descriptor,
+	.bDescriptorType =	USB_DT_OTG,
+
+	.bmAttributes =		USB_OTG_SRP,
+};
+
+
+#ifdef	CONFIG_USB_ETH_RNDIS
+
+/* RNDIS doesn't activate by changing to the "real" altsetting */
+
+static struct usb_interface_descriptor
+rndis_data_intf = {
+	.bLength =		sizeof rndis_data_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bInterfaceNumber =	0,
+	.bAlternateSetting =	0,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	0,
+	.iInterface =		STRING_DATA,
+};
+
+#endif
+
+
+static struct usb_endpoint_descriptor
+hs_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	(512),//ModifiedByJD    
+};
+
+static struct usb_endpoint_descriptor
+hs_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	(512),//ModifiedByJD    
+};
+
+static struct usb_endpoint_descriptor
+fs_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor
+fs_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+
+static const struct usb_descriptor_header *fs_rndis_function [] = {
+	(struct usb_descriptor_header *) &otg_descriptor,
+	/* control interface matches ACM, not Ethernet */
+#if 0//ModifiedByJD        
+	(struct usb_descriptor_header *) &rndis_control_intf,
+	(struct usb_descriptor_header *) &header_desc,
+	(struct usb_descriptor_header *) &call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &acm_descriptor,
+	(struct usb_descriptor_header *) &union_desc,
+	(struct usb_descriptor_header *) &fs_status_desc,
+#endif	
+	/* data interface has no altsetting */
+	(struct usb_descriptor_header *) &rndis_data_intf,
+	(struct usb_descriptor_header *) &fs_source_desc,
+	(struct usb_descriptor_header *) &fs_sink_desc,
+	NULL,
+};
+
+
+
+
+static const struct usb_descriptor_header *fs_eth_function [11] = {
+	(struct usb_descriptor_header *) &otg_descriptor,
+#ifdef DEV_CONFIG_CDC
+	/* "cdc" mode descriptors */
+	(struct usb_descriptor_header *) &control_intf,
+	(struct usb_descriptor_header *) &header_desc,
+	(struct usb_descriptor_header *) &union_desc,
+	(struct usb_descriptor_header *) &ether_desc,
+	/* NOTE: status endpoint may need to be removed */
+	(struct usb_descriptor_header *) &fs_status_desc,
+	/* data interface, with altsetting */
+	(struct usb_descriptor_header *) &data_nop_intf,
+	(struct usb_descriptor_header *) &data_intf,
+	(struct usb_descriptor_header *) &fs_source_desc,
+	(struct usb_descriptor_header *) &fs_sink_desc,
+	NULL,
+#endif /* DEV_CONFIG_CDC */
+};
+
+#ifdef	CONFIG_USB_ETH_RNDIS
+static const struct usb_descriptor_header *hs_rndis_function [] = {
+	(struct usb_descriptor_header *) &otg_descriptor,
+	/* control interface matches ACM, not Ethernet */
+#if 0//ModifiedByJD        
+	(struct usb_descriptor_header *) &rndis_control_intf,
+	(struct usb_descriptor_header *) &header_desc,
+	(struct usb_descriptor_header *) &call_mgmt_descriptor,
+	(struct usb_descriptor_header *) &acm_descriptor,
+	(struct usb_descriptor_header *) &union_desc,
+	(struct usb_descriptor_header *) &hs_status_desc,
+#endif	
+	/* data interface has no altsetting */
+	(struct usb_descriptor_header *) &rndis_data_intf,
+	(struct usb_descriptor_header *) &hs_source_desc,
+	(struct usb_descriptor_header *) &hs_sink_desc,
+	NULL,
+};
+#endif
+
+static struct usb_config_descriptor
+rndis_config = {
+	.bLength =              sizeof rndis_config,
+	.bDescriptorType =      USB_DT_CONFIG,
+
+	/* compute wTotalLength on the fly */
+	.bNumInterfaces =       1,
+	.bConfigurationValue =  DEV_RNDIS_CONFIG_VALUE,
+	.iConfiguration =       STRING_RNDIS, 
+	.bmAttributes =		USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+	.bMaxPower =            50,
+};
+
+static struct usb_configuration eth_configuration = {
+	.label = "eth_configuration",
+	.bConfigurationValue	= DEV_CONFIG_VALUE,
+//	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+};
+
+
+static struct eth_dev{
+		struct usb_gadget	*gadget;
+		struct usb_request	*req;		/* for control responses */
+		/* when configured, we have one of two configs:
+		 * - source data (in to host) and sink it (out from host)
+		 * - or loop it back (out from host back in to host)
+		 */
+		u8			config;
+		struct usb_ep	*in_ep;
+		struct usb_ep	*out_ep;
+	    const struct usb_endpoint_descriptor
+					*in, *out, *status;
+	    // lock is held when accessing usb
+	    _Lock	lock;
+		
+	    struct usb_function	func;
+
+		
+
+		/*send (depends on host)*/
+		_Sema	xmit_sema;
+		xTaskHandle	xmit_task;
+		unsigned int	qlen;
+		_Mutex 	xmit_mutex;
+		_LIST	eth2wlan_list;
+		/*receive (debuf_poolpends on host)*/
+		_Sema	recv_sema;
+		xTaskHandle	recv_task;
+		_Mutex	recv_mutex;
+		_LIST	wlan2eth_list;
+};
+
+
+extern int usb_eth_init(void);
+
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/device/class/msc/inc/usbd_msc.h

@@ -0,0 +1,183 @@
+#ifndef USBD_MSC_H
+#define USBD_MSC_H
+
+#include "usb.h"
+#include "usb_gadget.h"
+#include "core/inc/usb_composite.h"
+#include "msc/inc/usbd_msc_config.h"
+
+/* config usb msc device debug inforation */
+#define USBD_MSC_DEBUG          0
+
+#if	USBD_MSC_DEBUG
+#define USBD_PRINTF(fmt, args...)		            DBG_8195A("\n\r%s: " fmt, __FUNCTION__, ## args)
+#define USBD_ERROR(fmt, args...)		            DBG_8195A("\n\r%s: " fmt, __FUNCTION__, ## args)
+#define USBD_WARN(fmt, args...)		            	DBG_8195A("\n\r%s: " fmt, __FUNCTION__, ## args)
+#define FUN_ENTER                                   DBG_8195A("\n\r%s ==>\n", __func__)
+#define FUN_EXIT                                    DBG_8195A("\n\r%s <==\n", __func__)
+#define FUN_TRACE                                   DBG_8195A("\n\r%s:%d \n", __func__, __LINE__)
+#else
+#define USBD_PRINTF(fmt, args...)
+#define USBD_ERROR(fmt, args...)		            DBG_8195A("\n\r%s: " fmt, __FUNCTION__, ## args)
+#define USBD_WARN(fmt, args...)
+#define FUN_ENTER
+#define FUN_EXIT
+#define FUN_TRACE
+#endif
+
+/* MSC Request Codes */
+#define MSC_REQUEST_RESET               0xFF
+#define MSC_REQUEST_GET_MAX_LUN         0xFE
+
+/* MSC LUN */
+#define MSC_MAX_LOGIC_UNIT_NUMBER	1
+
+enum data_direction{
+	DATA_DIR_UNKNOWN = 0,
+	DATA_DIR_FROM_HOST,
+	DATA_DIR_TO_HOST,
+	DATA_DIR_NONE
+};
+
+typedef enum _disk_type{
+	DISK_SDCARD,
+	DISK_FLASH
+}disk_type;
+
+//structure predefine
+struct msc_dev;
+struct msc_bufhd;
+
+struct msc_opts{
+	int (*disk_init)(void);
+	int (*disk_deinit)(void);
+	int (*disk_getcapacity)(u32* sectors);
+	int (*disk_read)(u32 sector,u8 *buffer,u32 count);
+	int (*disk_write)(u32 sector,const u8 *buffer,u32 count);
+};
+
+struct msc_lun {
+	unsigned int	initially_ro:1;
+	unsigned int	ro:1;
+	unsigned int	removable:1;
+	unsigned int	cdrom:1;
+	unsigned int	prevent_medium_removal:1;
+	unsigned int	registered:1;
+	unsigned int	info_valid:1;
+	unsigned int	nofua:1;
+
+	u32		sense_data;
+	u32		sense_data_info;
+	u32		unit_attention_data;
+	
+	u64	file_length;
+	unsigned int    num_sectors; /*  */
+	unsigned int	blkbits; /* Bits of logical block size
+						       of bound block device */
+	unsigned int	blksize; /* logical block size of bound block device */
+	const char	*name;		/* "lun.name" */
+
+	unsigned int	lba; // the current read and write logical block address
+	u8 is_open;
+	_mutex	lun_mutex;
+	struct msc_opts *lun_opts;
+};
+
+
+struct msc_common{
+	struct msc_dev	*mscdev;
+	
+	struct msc_lun	**luns;
+	struct msc_lun	*curlun;
+
+	struct usb_gadget	*gadget;
+	struct usb_ep		*ep0;		
+	struct usb_request	*req0;		/* for control responses */
+
+	/* scsi cbw relevant */
+	enum data_direction	data_dir;
+	u32			data_size;
+	u32			data_size_from_cmnd;
+	u32			tag;
+	u32			residue;
+	u32			usb_amount_left;
+	u8			scsi_cmnd[16]; // max command
+	u8			cmnd_size;
+	
+	u8		lun;	/* current lun*/
+	u8		nluns;
+
+	u8	nbufhd;
+	u8	nbufhd_a;
+	_list	bufhd_pool;
+	_mutex  bufhd_mutex;
+	/* bulk out cmd*/
+	_list	boc_list;
+	_mutex  boc_mutex;
+
+	/* bolk out data*/
+	_mutex  bod_mutex;
+	_list	bod_list;
+	/**/
+	struct msc_bufhd* curbh; // current buffer header
+	struct msc_bufhd* cbw_bh; // buffer header for CBW
+	struct msc_bufhd* csw_bh; // buffer header for CSW
+	
+	unsigned int		can_stall:1;
+	unsigned int		phase_error:1;
+	unsigned int		short_packet_received:1;
+	unsigned int		bad_lun_okay:1;
+	unsigned int 		running:1;
+};
+
+typedef enum _bufhd_type{
+	BUFHD_CBW = 0,
+	BUFHD_CSW,
+	BUFHD_DATA,
+}bufhd_type;
+
+struct msc_bufhd{
+	u8* buf;
+	int buf_size;
+	bufhd_type type;
+	_list  list;	
+	struct usb_request	*reqin; 	/* for bulkin responses */
+	struct usb_request	*reqout;
+};
+
+struct msc_dev{
+	struct msc_common 	*common;
+	
+	u16 		interface_number;
+	u8			config;
+
+	struct usb_ep	*in_ep;
+	struct usb_ep	*out_ep;
+	unsigned int	bulk_in_enabled:1;
+	unsigned int	bulk_out_enabled:1;
+
+    const struct usb_endpoint_descriptor
+				*in, *out, *status;
+    // lock is held when accessing usb
+	struct task_struct msc_outCmdTask;
+	struct task_struct msc_outDataTask;
+    struct usb_function	func;
+};
+
+u32 min(u32 value1,u32 value2);
+
+int usbd_msc_halt_bulk_in_endpoint(struct msc_dev *mscdev);
+void usbd_msc_put_bufhd(struct msc_common *common, struct msc_bufhd* bufhd);
+struct msc_bufhd* usbd_msc_get_bufhd(struct msc_common *common);
+int usbd_msc_bulk_in_transfer(struct msc_dev *mscdev, struct usb_request *req);
+int usbd_msc_bulk_out_transfer(struct msc_dev *mscdev, struct usb_request *req);
+
+/*
+* N_bh : number of buffer header
+* Size_bh: buffer size per buffer
+* type:msc physical disk type
+*/
+int usbd_msc_init(int N_bh, int Size_bh, disk_type type);
+void usbd_msc_deinit(void);
+
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/device/class/msc/inc/usbd_msc_config.h

@@ -0,0 +1,8 @@
+#ifndef _USBD_MSC_CONFIG_H
+#define _USBD_MSC_CONFIG_H
+
+/* config usb MSC device buffer resource */
+#define MSC_NBR_BUFHD	2 /* number of buffer header for bulk in/out data*/
+#define MSC_BUFLEN	(20*512)/* Default size of buffer length. Minmun of 512 byte*/
+
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/device/class/msc/inc/usbd_msc_desc.h

@@ -0,0 +1,196 @@
+#include "usb_ch9.h"
+#include "usb_defs.h"
+#include "usb_gadget.h"
+
+//     <i> Enable high-speed functionality (if device supports it)
+#define USBD_HS_ENABLE              1
+
+
+// define string index
+#define STRING_MANUFACTURER		1
+#define STRING_PRODUCT			2
+#define STRING_SERIALNUMBER		3
+#define STRING_INTERFACE		4
+#define STRING_MSC				5
+
+
+#define DEV_CONFIG_VALUE	1
+
+#define DRIVER_DESC		"USB Mass Storage"
+#define DRIVER_VERSION	"Feb 2016"
+
+#define MANUFACTURER 	"Realtek Singapore Semiconductor"
+
+static char	string_manufacturer [50] = MANUFACTURER;
+static char	string_product [40] = DRIVER_DESC;
+static char	string_serial [20] = "0123456789";
+
+struct usb_string		
+usbd_msc_strings [] = {
+	{ STRING_MANUFACTURER,	string_manufacturer, },        
+	{ STRING_PRODUCT,	string_product, },
+	{ STRING_SERIALNUMBER,	string_serial, },
+	{ STRING_INTERFACE,		"USB MSC Interface", },
+	{ STRING_MSC,		"USB MSC", },
+};
+
+struct usb_gadget_strings	msc_stringtab = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= usbd_msc_strings,
+};
+
+struct usb_gadget_strings *dev_msc_strings[] = {
+	&msc_stringtab,
+	NULL,
+};
+
+static struct usb_device_descriptor
+usbd_msc_device_desc = {
+	.bLength =		sizeof usbd_msc_device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	.bcdUSB =		    (0x0200),
+
+	.bDeviceClass =		0x00,// define in interface descriptor
+	.bDeviceSubClass =	0x00,
+	.bDeviceProtocol =	0x00,
+
+	.bMaxPacketSize0 = 	64,	// this will be set automatically depends on ep0 setting
+	.idVendor =			0x0BDA,
+	.idProduct =		0x8195,
+//	.bcdDevice = 		,
+	.iManufacturer =	STRING_MANUFACTURER,
+	.iProduct =			STRING_PRODUCT,
+	.iSerialNumber =	STRING_SERIALNUMBER,
+	.bNumConfigurations=0x01,
+};
+#if 0
+struct usb_config_descriptor
+usbd_msc_config_desc = {
+	.bLength =		sizeof usbd_msc_config_desc,
+	.bDescriptorType =	USB_DT_CONFIG,
+
+	/* compute wTotalLength on the fly */
+	.bNumInterfaces =	1,
+	.bConfigurationValue =	DEV_CONFIG_VALUE,
+	.iConfiguration =	STRING_MSC,
+	.bmAttributes =		USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+	.bMaxPower =		0x32,
+};
+#endif
+
+#if USBD_HS_ENABLE
+/* USB Device Qualifier Descriptor (for Full Speed) */
+static struct usb_qualifier_descriptor
+usbd_msc_qualifier_desc_FS = {
+	.bLength = sizeof usbd_msc_qualifier_desc_FS,
+	.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+	.bcdUSB = 0x0200,
+	.bDeviceClass = 0x00,
+	.bDeviceSubClass = 0x00,
+	.bDeviceProtocol = 0x00,
+	.bMaxPacketSize0 = 64,
+	.bNumConfigurations = 0x01,
+	.bRESERVED = 0x00,
+};
+
+/* USB Device Qualifier Descriptor for High Speed */
+static struct usb_qualifier_descriptor
+usbd_msc_qualifier_desc_HS = {
+	.bLength = sizeof usbd_msc_qualifier_desc_HS,
+	.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+	.bcdUSB = 0x0200,
+	.bDeviceClass = 0x00,
+	.bDeviceSubClass = 0x00,
+	.bDeviceProtocol = 0x00,
+	.bMaxPacketSize0 = 64,
+	.bNumConfigurations = 0x01,
+	.bRESERVED = 0x00,
+};
+#else
+/* USB Device Qualifier Descriptor (for Full Speed) */
+static struct usb_qualifier_descriptor
+usbd_msc_qualifier_desc_FS    = { 0 };
+
+/* USB Device Qualifier Descriptor for High Speed */
+static struct usb_qualifier_descriptor
+usbd_msc_qualifier_desc_HS = { 0 };
+#endif
+
+/* MSC Interface, Alternate Setting 0*/  
+struct usb_interface_descriptor
+usbd_msc_intf_desc = {
+	.bLength =		sizeof usbd_msc_intf_desc,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bInterfaceNumber =	0x00, // this will be assign automatically
+	.bAlternateSetting =0x00,
+	.bNumEndpoints =	0x02,
+	.bInterfaceClass =	USB_CLASS_MASS_STORAGE,
+	.bInterfaceSubClass = US_SC_SCSI,
+	.bInterfaceProtocol = US_PR_BULK,
+	.iInterface =		STRING_INTERFACE,
+};
+
+/* MSC Endpoints for Low-speed/Full-speed */
+/* Endpoint, EP Bulk IN */ 
+struct usb_endpoint_descriptor
+usbd_msc_source_desc_FS = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	(64), 
+	.bInterval = 0x00,
+	
+};
+/* Endpoint, EP Bulk OUT */ 
+struct usb_endpoint_descriptor
+usbd_msc_sink_desc_FS = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	(64), 
+	.bInterval = 0x00,
+};
+
+/* MSC Endpoints for High-speed */
+/* Endpoint, EP Bulk IN */ 
+struct usb_endpoint_descriptor
+usbd_msc_source_desc_HS = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress = USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	(512), 
+	.bInterval = 0x00,
+};
+
+/* Endpoint, EP Bulk OUT */ 
+struct usb_endpoint_descriptor
+usbd_msc_sink_desc_HS = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress = USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	(512),
+	.bInterval = 0x00,
+};
+
+struct usb_descriptor_header *usbd_msc_descriptors_FS [] = {
+	/* data interface has no altsetting */
+	(struct usb_descriptor_header *) &usbd_msc_intf_desc,
+	(struct usb_descriptor_header *) &usbd_msc_source_desc_FS,
+	(struct usb_descriptor_header *) &usbd_msc_sink_desc_FS,
+	NULL,
+};
+struct usb_descriptor_header *usbd_msc_descriptors_HS [] = {
+	/* data interface has no altsetting */
+	(struct usb_descriptor_header *) &usbd_msc_intf_desc,
+	(struct usb_descriptor_header *) &usbd_msc_source_desc_HS,
+	(struct usb_descriptor_header *) &usbd_msc_sink_desc_HS,
+	NULL,
+};

RTL00_SDKV35a/component/common/drivers/usb_class/device/class/msc/inc/usbd_scsi.h

@@ -0,0 +1,110 @@
+#ifndef USBD_SCSI_H
+#define USBD_SCSI_H
+#include "basic_types.h"
+#include "msc/inc/usbd_msc.h"
+
+#define MAX_COMMAND_SIZE 16
+#define MSC_MAX_LUNS	8
+
+/* SCSI Commands */
+#define SCSI_FORMAT_UNIT                            0x04
+#define SCSI_INQUIRY                                0x12
+#define SCSI_MODE_SELECT6                           0x15
+#define SCSI_MODE_SELECT10                          0x55
+#define SCSI_MODE_SENSE6                            0x1A
+#define SCSI_MODE_SENSE10                           0x5A
+#define SCSI_ALLOW_MEDIUM_REMOVAL                   0x1E
+#define SCSI_READ6                                  0x08
+#define SCSI_READ10                                 0x28
+#define SCSI_READ12                                 0xA8
+#define SCSI_READ16                                 0x88
+
+#define SCSI_READ_CAPACITY10                        0x25
+#define SCSI_READ_CAPACITY16                        0x9E
+
+#define SCSI_SYNCHRONIZE_CACHE						0x35
+#define SCSI_REQUEST_SENSE                          0x03
+#define SCSI_START_STOP_UNIT                        0x1B
+#define SCSI_TEST_UNIT_READY                        0x00
+#define SCSI_WRITE6                                 0x0A
+#define SCSI_WRITE10                                0x2A
+#define SCSI_WRITE12                                0xAA
+#define SCSI_WRITE16                                0x8A
+
+#define SCSI_VERIFY10                               0x2F
+#define SCSI_VERIFY12                               0xAF
+#define SCSI_VERIFY16                               0x8F
+
+#define SCSI_SEND_DIAGNOSTIC                        0x1D
+#define SCSI_READ_FORMAT_CAPACITIES                 0x23
+
+#define READ_FORMAT_CAPACITY_DATA_LEN               0x0C
+#define READ_CAPACITY10_DATA_LEN                    0x08
+#define MODE_SENSE10_DATA_LEN                       0x08
+#define MODE_SENSE6_DATA_LEN                        0x04
+#define REQUEST_SENSE_DATA_LEN                      0x12
+#define STANDARD_INQUIRY_DATA_LEN                   0x24
+
+/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */
+#define SS_NO_SENSE				0
+#define SS_COMMUNICATION_FAILURE		0x040800
+#define SS_INVALID_COMMAND			0x052000
+#define SS_INVALID_FIELD_IN_CDB			0x052400
+#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE	0x052100
+#define SS_LOGICAL_UNIT_NOT_SUPPORTED		0x052500
+#define SS_MEDIUM_NOT_PRESENT			0x023a00
+#define SS_MEDIUM_REMOVAL_PREVENTED		0x055302
+#define SS_NOT_READY_TO_READY_TRANSITION	0x062800
+#define SS_RESET_OCCURRED			0x062900
+#define SS_SAVING_PARAMETERS_NOT_SUPPORTED	0x053900
+#define SS_UNRECOVERED_READ_ERROR		0x031100
+#define SS_WRITE_ERROR				0x030c02
+#define SS_WRITE_PROTECTED			0x072700
+
+
+
+#define SK(x)		((u8) ((x) >> 16))	/* Sense Key byte, etc. */
+#define ASC(x)		((u8) ((x) >> 8))
+#define ASCQ(x)		((u8) (x))
+
+/*
+* Bulk only data structures
+*/
+
+/* command block wrapper */
+struct bulk_cb_wrap {
+	unsigned int	Signature;		/* contains 'USBC', denote bulk_cb_wrap */
+	unsigned int	Tag;			/* unique per command id */
+	unsigned int	DataTransferLength;	/* size of data for transfer */
+	unsigned char	Flags;			/* data transfer direction */
+	unsigned char	Lun;			/* LUN normally 0, (which command block is sent) */
+	unsigned char	Length;			/* length of the CDB */
+	unsigned char	CDB[16];		/* max command */
+};
+
+#define US_BULK_CB_WRAP_LEN	31
+#define US_BULK_CB_SIGN		0x43425355	/*spells out USBC */
+#define US_BULK_FLAG_IN		(1 << 7)
+#define US_BULK_FLAG_OUT	0
+
+/* command status wrapper */
+struct bulk_cs_wrap {
+	unsigned int	Signature;	/* should = 'USBS' */
+	unsigned int	Tag;		/* same as original command, echoed by the device as received */
+	unsigned int	Residue;	/* amount not transferred */
+	unsigned char	Status;		/* execute command status */
+};
+
+#define US_BULK_CS_WRAP_LEN	13
+#define US_BULK_CS_SIGN		0x53425355      /* spells out 'USBS' */
+// execute command status
+#define US_BULK_STAT_OK		0
+#define US_BULK_STAT_FAIL	1
+#define US_BULK_STAT_PHASE	2
+
+/* bulk-only class specific requests */
+#define US_BULK_RESET_REQUEST   0xff
+#define US_BULK_GET_MAX_LUN     0xfe
+
+extern int usbd_msc_receive_cbw(struct msc_dev *mscdev, struct usb_request *req);
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/device/core/inc/gadget_debug.h

@@ -0,0 +1,24 @@
+#ifndef _GADEGT_DEBUG_H_
+#define _GADGET_DEBUG_H_
+
+#include "diag.h"
+
+#define GADGET_DEBUG       0
+
+#if GADGET_DEBUG
+#define GADGET_PRINT(fmt, args...)		            DBG_8195A("\n\r[%s]: " fmt, __FUNCTION__, ## args)
+#define GADGET_ERROR(fmt, args...)		            DBG_8195A("\n\r[%s]: " fmt, __FUNCTION__, ## args)
+#define GADGET_WARN(fmt, args...)		            DBG_8195A("\n\r[%s]: " fmt, __FUNCTION__, ## args)
+#define FUN_ENTER                                   DBG_8195A("\n\r[%s ==>]\n", __func__)
+#define FUN_EXIT                                    DBG_8195A("\n\r[%s <==]\n", __func__)
+#define FUN_TRACE                                   DBG_8195A("\n\r[%s]:%d \n", __func__, __LINE__)
+#else
+#define GADGET_PRINT(fmt, args...)
+#define GADGET_ERROR(fmt, args...)		            DBG_8195A("\n\r[%s]: " fmt, __FUNCTION__, ## args)
+#define GADGET_WARN(fmt, args...)
+#define FUN_ENTER
+#define FUN_EXIT
+#define FUN_TRACE
+#endif
+
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/device/core/inc/os_wrapper.h

@@ -0,0 +1,30 @@
+#ifndef _OS_WRAPPER_H_
+#define _OS_WRAPPER_H_
+
+#include "osdep_api.h"
+
+#ifndef spinlock_t
+#define spinlock_t _Lock
+#endif
+
+#ifndef _atomic_spin_lock_irqsave
+#define _atomic_spin_lock_irqsave(p, flags) 		SaveAndCli()
+#endif
+#ifndef _atomic_spin_unlock_irqrestore
+#define _atomic_spin_unlock_irqrestore(p, flags)	RestoreFlags()
+#endif
+
+/* spin lock */
+#ifndef spin_lock_init
+	#define spin_lock_init(plock) 			RtlSpinlockInit((plock))
+#endif
+#ifndef spin_lock_free
+	#define spin_lock_free(plock) 			RtlSpinlockFree((plock))
+#endif
+#ifndef spin_lock
+	#define spin_lock(plock) 			RtlSpinlock((plock))
+#endif
+#ifndef spin_unlock
+	#define spin_unlock(plock) 			RtlSpinunlock((plock))
+#endif
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/device/core/inc/usb_composite.h

@@ -0,0 +1,398 @@
+#ifndef _USB_COMPOSITE_H_
+#define _USB_COMPOSITE_H_
+
+#include "usb_gadget.h"
+#include "usb.h"
+
+/*
+ * USB function drivers should return USB_GADGET_DELAYED_STATUS if they
+ * wish to delay the data/status stages of the control transfer till they
+ * are ready. The control transfer will then be kept from completing till
+ * all the function drivers that requested for USB_GADGET_DELAYED_STAUS
+ * invoke usb_composite_setup_continue().
+ */
+#define USB_GADGET_DELAYED_STATUS       0x7fff	/* Impossibly large value */
+
+
+/* big enough to hold our biggest descriptor */
+#define USB_COMP_EP0_BUFSIZ	1024+24
+#define	MAX_CONFIG_INTERFACES		16	/* arbitrary; max 255 */
+// predefine structure
+struct usb_composite_dev;
+struct usb_composite_driver;
+
+enum control_request_return_codes {
+ 		USBD_REQ_NOTSUPP		= 0,
+ 		USBD_REQ_HANDLED		= 1,
+ 		USBD_REQ_NEXT_CALLBACK	= 2,
+};
+
+
+/**
+ * struct usb_composite_driver - groups configurations into a gadget
+ * @name: For diagnostics, identifies the driver.
+ * @dev: Template descriptor for the device, including default device
+ *	identifiers.
+ * @strings: tables of strings, keyed by identifiers assigned during @bind
+ *	and language IDs provided in control requests. Note: The first entries
+ *	are predefined. The first entry that may be used is
+ *	USB_GADGET_FIRST_AVAIL_IDX
+ * @max_speed: Highest speed the driver supports.
+ * @needs_serial: set to 1 if the gadget needs userspace to provide
+ * 	a serial number.  If one is not provided, warning will be printed.
+ * @bind: (REQUIRED) Used to allocate resources that are shared across the
+ *	whole device, such as string IDs, and add its configurations using
+ *	@usb_add_config(). This may fail by returning a negative errno
+ *	value; it should return zero on successful initialization.
+ * @unbind: Reverses @bind; called as a side effect of unregistering
+ *	this driver.
+ * @disconnect: optional driver disconnect method
+ * @suspend: Notifies when the host stops sending USB traffic,
+ *	after function notifications
+ * @resume: Notifies configuration when the host restarts USB traffic,
+ *	before function notifications
+ * @gadget_driver: Gadget driver controlling this driver
+ *
+ * Devices default to reporting self powered operation.  Devices which rely
+ * on bus powered operation should report this in their @bind method.
+ *
+ * Before returning from @bind, various fields in the template descriptor
+ * may be overridden.  These include the idVendor/idProduct/bcdDevice values
+ * normally to bind the appropriate host side driver, and the three strings
+ * (iManufacturer, iProduct, iSerialNumber) normally used to provide user
+ * meaningful device identifiers.  (The strings will not be defined unless
+ * they are defined in @dev and @strings.)  The correct ep0 maxpacket size
+ * is also reported, as defined by the underlying controller driver.
+ */
+
+struct usb_composite_driver {
+	const char				*name;
+	const struct usb_device_descriptor	*dev;
+	struct usb_gadget_strings		**strings;
+	enum usb_device_speed			max_speed;
+	unsigned		needs_serial:1;
+
+	int			(*bind)(struct usb_composite_dev *cdev);
+	int			(*unbind)(struct usb_composite_dev *);
+
+	void			(*disconnect)(struct usb_composite_dev *);
+
+	/* global suspend hooks */
+	void			(*suspend)(struct usb_composite_dev *);
+	void			(*resume)(struct usb_composite_dev *);
+	struct usb_gadget_driver		gadget_driver;
+};
+/**
+ * struct usb_composite_device - represents one composite usb gadget
+ * @gadget: read-only, abstracts the gadget's usb peripheral controller
+ * @req: used for control responses; buffer is pre-allocated
+ * @os_desc_req: used for OS descriptors responses; buffer is pre-allocated
+ * @config: the currently active configuration
+ * @qw_sign: qwSignature part of the OS string
+ * @b_vendor_code: bMS_VendorCode part of the OS string
+ * @use_os_string: false by default, interested gadgets set it
+ * @os_desc_config: the configuration to be used with OS descriptors
+ *
+ * One of these devices is allocated and initialized before the
+ * associated device driver's bind() is called.
+ *
+ * OPEN ISSUE:  it appears that some WUSB devices will need to be
+ * built by combining a normal (wired) gadget with a wireless one.
+ * This revision of the gadget framework should probably try to make
+ * sure doing that won't hurt too much.
+ *
+ * One notion for how to handle Wireless USB devices involves:
+ * (a) a second gadget here, discovery mechanism TBD, but likely
+ *     needing separate "register/unregister WUSB gadget" calls;
+ * (b) updates to usb_gadget to include flags "is it wireless",
+ *     "is it wired", plus (presumably in a wrapper structure)
+ *     bandgroup and PHY info;
+ * (c) presumably a wireless_ep wrapping a usb_ep, and reporting
+ *     wireless-specific parameters like maxburst and maxsequence;
+ * (d) configurations that are specific to wireless links;
+ * (e) function drivers that understand wireless configs and will
+ *     support wireless for (additional) function instances;
+ * (f) a function to support association setup (like CBAF), not
+ *     necessarily requiring a wireless adapter;
+ * (g) composite device setup that can create one or more wireless
+ *     configs, including appropriate association setup support;
+ * (h) more, TBD.
+ */
+
+#define MAX_USER_CONTROL_CALLBACK	2
+
+typedef int (*user_control_callback)(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl);
+
+struct usb_composite_dev {
+	struct usb_gadget		*gadget;
+	struct usb_request		*req;
+	struct usb_request		*os_desc_req;
+
+	struct usb_configuration	*config;
+//
+//	/* OS String is a custom (yet popular) extension to the USB standard. */
+//	u8				qw_sign[OS_STRING_QW_SIGN_LEN];
+//	u8				b_vendor_code;
+//	struct usb_configuration	*os_desc_config;
+//	unsigned int			use_os_string:1;
+//
+//	/* private: */
+//	/* internals */
+	unsigned int			suspended:1;
+	struct usb_device_descriptor	desc;
+	
+	//_LIST		config_list;
+	dwc_list_link_t config_list; // by jimmy
+	//_LIST		gstring_list; 
+	dwc_list_link_t gstring_list;// by jimmy
+	
+	struct usb_composite_driver	*driver;
+//	u8				next_string_id;
+//	char				*def_manufacturer;
+//
+//	/* the gadget driver won't enable the data pullup
+//	 * while the deactivation count is nonzero.
+//	 */
+//	unsigned			deactivations;
+//
+//	/* the composite driver won't complete the control transfer's
+//	 * data/status stages till delayed_status is zero.
+//	 */
+//	int				delayed_status;
+//
+//	/* protects deactivations and delayed_status counts*/
+	_Lock			lock;
+	/* for unstandard control request handler */
+
+	user_control_callback control_cb[MAX_USER_CONTROL_CALLBACK];
+};
+
+
+#if 0
+#define container_of(p,t,n) (t*)((p)-&(((t*)0)->n))
+
+static inline struct usb_composite_driver *to_cdriver(
+		struct usb_gadget_driver *gdrv)
+{
+	return container_of(gdrv, struct usb_composite_driver, gadget_driver);
+}
+#endif
+#if 1
+/**
+ * struct usb_configuration - represents one gadget configuration
+ * @label: For diagnostics, describes the configuration.
+ * @strings: Tables of strings, keyed by identifiers assigned during @bind()
+ *	and by language IDs provided in control requests.
+ * @descriptors: Table of descriptors preceding all function descriptors.
+ *	Examples include OTG and vendor-specific descriptors.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ *	driver which added this configuration.
+ * @setup: Used to delegate control requests that aren't handled by standard
+ *	device infrastructure or directed at a specific interface.
+ * @bConfigurationValue: Copied into configuration descriptor.
+ * @iConfiguration: Copied into configuration descriptor.
+ * @bmAttributes: Copied into configuration descriptor.
+ * @MaxPower: Power consumtion in mA. Used to compute bMaxPower in the
+ *	configuration descriptor after considering the bus speed.
+ * @cdev: assigned by @usb_add_config() before calling @bind(); this is
+ *	the device associated with this configuration.
+ *
+ * Configurations are building blocks for gadget drivers structured around
+ * function drivers.  Simple USB gadgets require only one function and one
+ * configuration, and handle dual-speed hardware by always providing the same
+ * functionality.  Slightly more complex gadgets may have more than one
+ * single-function configuration at a given speed; or have configurations
+ * that only work at one speed.
+ *
+ * Composite devices are, by definition, ones with configurations which
+ * include more than one function.
+ *
+ * The lifecycle of a usb_configuration includes allocation, initialization
+ * of the fields described above, and calling @usb_add_config() to set up
+ * internal data and bind it to a specific device.  The configuration's
+ * @bind() method is then used to initialize all the functions and then
+ * call @usb_add_function() for them.
+ *
+ * Those functions would normally be independent of each other, but that's
+ * not mandatory.  CDC WMC devices are an example where functions often
+ * depend on other functions, with some functions subsidiary to others.
+ * Such interdependency may be managed in any way, so long as all of the
+ * descriptors complete by the time the composite driver returns from
+ * its bind() routine.
+ */
+struct usb_configuration {
+	const char			*label;
+	struct usb_gadget_strings	**strings;
+	const struct usb_descriptor_header **descriptors;
+
+	/* REVISIT:  bind() functions can be marked __init, which
+	 * makes trouble for section mismatch analysis.  See if
+	 * we can't restructure things to avoid mismatching...
+	 */
+
+	/* configuration management: unbind/setup */
+	void			(*unbind)(struct usb_configuration *);
+	int			(*setup)(struct usb_configuration *,
+					const struct usb_ctrlrequest *);
+
+	/* fields in the config descriptor */
+	u8			bConfigurationValue;
+	u8			iConfiguration;
+	u8			bmAttributes;
+	u16			MaxPower;
+
+	struct usb_composite_dev	*cdev;
+
+	/* private: */
+	/* internals */
+	//_LIST	list;
+	//_LIST	function_lists;
+	dwc_list_link_t list;
+	dwc_list_link_t function_lists; // by jimmy
+	
+	u8			next_interface_id;
+	unsigned		superspeed:1;
+	unsigned		highspeed:1;
+	unsigned		fullspeed:1;
+	struct usb_function	*interface[MAX_CONFIG_INTERFACES];
+};
+
+_LONG_CALL_ int usb_interface_id(struct usb_configuration *config,
+		struct usb_function *function);
+
+_LONG_CALL_ int usb_add_config(struct usb_composite_dev *,
+		struct usb_configuration *,
+		int (*)(struct usb_configuration *));
+
+_LONG_CALL_ void usb_remove_config(struct usb_composite_dev *,
+		struct usb_configuration *);
+
+/**
+ * struct usb_function - describes one function of a configuration
+ * @name: For diagnostics, identifies the function.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ *	and by language IDs provided in control requests
+ * @fs_descriptors: Table of full (or low) speed descriptors, using interface and
+ *	string identifiers assigned during @bind().  If this pointer is null,
+ *	the function will not be available at full speed (or at low speed).
+ * @hs_descriptors: Table of high speed descriptors, using interface and
+ *	string identifiers assigned during @bind().  If this pointer is null,
+ *	the function will not be available at high speed.
+ * @ss_descriptors: Table of super speed descriptors, using interface and
+ *	string identifiers assigned during @bind(). If this
+ *	pointer is null after initiation, the function will not
+ *	be available at super speed.
+ * @config: assigned when @usb_add_function() is called; this is the
+ *	configuration with which this function is associated.
+ * @os_desc_table: Table of (interface id, os descriptors) pairs. The function
+ *	can expose more than one interface. If an interface is a member of
+ *	an IAD, only the first interface of IAD has its entry in the table.
+ * @os_desc_n: Number of entries in os_desc_table
+ * @bind: Before the gadget can register, all of its functions bind() to the
+ *	available resources including string and interface identifiers used
+ *	in interface or class descriptors; endpoints; I/O buffers; and so on.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ *	driver which added this function.
+ * @free_func: free the struct usb_function.
+ * @mod: (internal) points to the module that created this structure.
+ * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
+ *	initialize usb_ep.driver data at this time (when it is used).
+ *	Note that setting an interface to its current altsetting resets
+ *	interface state, and that all interfaces have a disabled state.
+ * @get_alt: Returns the active altsetting.  If this is not provided,
+ *	then only altsetting zero is supported.
+ * @disable: (REQUIRED) Indicates the function should be disabled.  Reasons
+ *	include host resetting or reconfiguring the gadget, and disconnection.
+ * @setup: Used for interface-specific control requests.
+ * @suspend: Notifies functions when the host stops sending USB traffic.
+ * @resume: Notifies functions when the host restarts USB traffic.
+ * @get_status: Returns function status as a reply to
+ *	GetStatus() request when the recipient is Interface.
+ * @func_suspend: callback to be called when
+ *	SetFeature(FUNCTION_SUSPEND) is reseived
+ *
+ * A single USB function uses one or more interfaces, and should in most
+ * cases support operation at both full and high speeds.  Each function is
+ * associated by @usb_add_function() with a one configuration; that function
+ * causes @bind() to be called so resources can be allocated as part of
+ * setting up a gadget driver.  Those resources include endpoints, which
+ * should be allocated using @usb_ep_autoconfig().
+ *
+ * To support dual speed operation, a function driver provides descriptors
+ * for both high and full speed operation.  Except in rare cases that don't
+ * involve bulk endpoints, each speed needs different endpoint descriptors.
+ *
+ * Function drivers choose their own strategies for managing instance data.
+ * The simplest strategy just declares it "static', which means the function
+ * can only be activated once.  If the function needs to be exposed in more
+ * than one configuration at a given speed, it needs to support multiple
+ * usb_function structures (one for each configuration).
+ *
+ * A more complex strategy might encapsulate a @usb_function structure inside
+ * a driver-specific instance structure to allows multiple activations.  An
+ * example of multiple activations might be a CDC ACM function that supports
+ * two or more distinct instances within the same configuration, providing
+ * several independent logical data links to a USB host.
+ */
+
+struct usb_function {
+	const char			*name;
+	struct usb_gadget_strings	**strings;
+	struct usb_descriptor_header	**fs_descriptors;
+	struct usb_descriptor_header	**hs_descriptors;
+//	struct usb_descriptor_header	**ss_descriptors;
+
+	struct usb_configuration	*config;
+
+//	struct usb_os_desc_table	*os_desc_table;
+//	unsigned			os_desc_n;
+
+	/* REVISIT:  bind() functions can be marked __init, which
+	 * makes trouble for section mismatch analysis.  See if
+	 * we can't restructure things to avoid mismatching.
+	 * Related:  unbind() may kfree() but bind() won't...
+	 */
+
+	/* configuration management:  bind/unbind */
+	int			(*bind)(struct usb_configuration *,
+					struct usb_function *);
+	void			(*unbind)(struct usb_configuration *,
+					struct usb_function *);
+	void			(*free_func)(struct usb_function *f);
+	struct module		*mod;
+
+	/* runtime state management */
+	int			(*set_alt)(struct usb_function *,
+					unsigned interface, unsigned alt);
+	int			(*get_alt)(struct usb_function *,
+					unsigned interface);
+	void			(*disable)(struct usb_function *);
+	int			(*setup)(struct usb_function *,
+					const struct usb_ctrlrequest *);
+	void			(*suspend)(struct usb_function *);
+	void			(*resume)(struct usb_function *);
+
+	/* USB 3.0 additions */
+	int			(*get_status)(struct usb_function *);
+	int			(*func_suspend)(struct usb_function *,
+						u8 suspend_opt);
+	/* private: */
+	/* internals */
+	//_LIST		list;
+	dwc_list_link_t list; // by jimmy
+//	DECLARE_BITMAP(endpoints, 32);
+//	const struct usb_function_instance *fi;
+};
+
+#endif
+extern _LONG_CALL_ int usb_add_function(struct usb_configuration *, struct usb_function *);
+extern _LONG_CALL_ void usb_remove_function(struct usb_configuration *, struct usb_function *);
+extern _LONG_CALL_ void usb_put_function(struct usb_function *);
+extern _LONG_CALL_ int usb_function_deactivate(struct usb_function *);
+extern _LONG_CALL_ int usb_function_activate(struct usb_function *);
+
+extern _LONG_CALL_ int usb_interface_id(struct usb_configuration *, struct usb_function *);
+extern _LONG_CALL_ int usb_composite_probe(struct usb_composite_driver *driver);
+extern _LONG_CALL_ int register_class_vendor_control_request_cb(struct usb_composite_dev *cdev, user_control_callback cb);
+extern _LONG_CALL_ void usb_composite_unregister(struct usb_composite_driver *driver);
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/device/core/inc/usb_config.h

@@ -0,0 +1,12 @@
+#ifndef _USB_CONFIG_H_
+#define _USB_CONFIG_H_
+
+#include "core/inc/usb_composite.h"
+
+extern _LONG_CALL_ int usb_assign_descriptors(struct usb_function *f,
+		struct usb_descriptor_header **fs,
+		struct usb_descriptor_header **hs,
+		struct usb_descriptor_header **ss);
+
+extern _LONG_CALL_ void usb_free_all_descriptors(struct usb_function *f);
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/device/core/inc/usb_transport.h

@@ -0,0 +1,5 @@
+#ifndef _USB_BOT_H
+#define _USB_BOT_H
+#include "basic_types.h"
+
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/quirks/quirks.h

@@ -0,0 +1,34 @@
+/*
+ * This file holds the definitions of quirks found in USB devices.
+ * Only quirks that affect the whole device, not an interface,
+ * belong here.
+ */
+
+#ifndef __QUIRKS_H
+#define __QUIRKS_H
+
+/* string descriptors must not be fetched using a 255-byte read */
+#define USB_QUIRK_STRING_FETCH_255		0x00000001
+
+/* device can't resume correctly so reset it instead */
+#define USB_QUIRK_RESET_RESUME			0x00000002
+
+/* device can't handle Set-Interface requests */
+#define USB_QUIRK_NO_SET_INTF			0x00000004
+
+/* device can't handle its Configuration or Interface strings */
+#define USB_QUIRK_CONFIG_INTF_STRINGS	0x00000008
+
+/* device can't be reset(e.g morph devices), don't use reset */
+#define USB_QUIRK_RESET					0x00000010
+
+/* device has more interface descriptions than the bNumInterfaces count,
+   and can't handle talking to these interfaces */
+#define USB_QUIRK_HONOR_BNUMINTERFACES	0x00000020
+
+/* device needs a pause during initialization, after we read the device
+   descriptor */
+#define USB_QUIRK_DELAY_INIT			0x00000040
+
+#endif /* __QUIRKS_H */
+

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/scatterlist/scatterlist.h

@@ -0,0 +1,20 @@
+#ifndef _SCATTERLIST_H
+#define _SCATTERLIST_H
+
+struct scatterlist {
+	unsigned long   sg_magic;
+	unsigned long   page_link;
+	unsigned int    offset;
+
+	unsigned int    length;
+
+	dma_addr_t      dma_address;
+	__u32           dma_length;
+};
+
+struct sg_table {
+	struct scatterlist *sgl;	/* the list */
+	unsigned int nents;		/* number of mapped entries */
+	unsigned int orig_nents;	/* original size of list */
+};
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/scsi/dma_direction.h

@@ -0,0 +1,12 @@
+#ifndef _DMA_DIRECTION_H
+#define _DMA_DIRECTION_H
+
+enum dma_data_direction {
+         DMA_BIDIRECTIONAL = 0,
+         DMA_TO_DEVICE = 1,
+         DMA_FROM_DEVICE = 2,
+         DMA_NONE = 3,
+};
+
+#endif
+

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/scsi/scsi.h

@@ -0,0 +1,585 @@
+/*
+ * This header file contains public constants and structures used by
+ * the scsi code for linux.
+ *
+ * For documentation on the OPCODES, MESSAGES, and SENSE values,
+ * please consult the SCSI standard.
+ */
+#ifndef _SCSI_SCSI_H
+#define _SCSI_SCSI_H
+
+#include "us_os_wrap_via_osdep_api.h"
+
+#define HZ 1024
+
+struct scsi_cmnd;
+
+enum scsi_timeouts {
+	SCSI_DEFAULT_EH_TIMEOUT		= 10 * HZ,
+};
+
+/*
+ * The maximum number of SG segments that we will put inside a
+ * scatterlist (unless chaining is used). Should ideally fit inside a
+ * single page, to avoid a higher order allocation.  We could define this
+ * to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order.  The
+ * minimum value is 32
+ */
+#define SCSI_MAX_SG_SEGMENTS	128
+
+/*
+ * Like SCSI_MAX_SG_SEGMENTS, but for archs that have sg chaining. This limit
+ * is totally arbitrary, a setting of 2048 will get you at least 8mb ios.
+ */
+#ifdef ARCH_HAS_SG_CHAIN
+#define SCSI_MAX_SG_CHAIN_SEGMENTS	2048
+#else
+#define SCSI_MAX_SG_CHAIN_SEGMENTS	SCSI_MAX_SG_SEGMENTS
+#endif
+
+/*
+ * DIX-capable adapters effectively support infinite chaining for the
+ * protection information scatterlist
+ */
+#define SCSI_MAX_PROT_SG_SEGMENTS	0xFFFF
+
+/*
+ * Special value for scanning to specify scanning or rescanning of all
+ * possible channels, (target) ids, or luns on a given shost.
+ */
+#define SCAN_WILD_CARD	~0
+
+/*
+ *      SCSI opcodes
+ */
+
+#define TEST_UNIT_READY       0x00
+#define REZERO_UNIT           0x01
+#define REQUEST_SENSE         0x03
+#define FORMAT_UNIT           0x04
+#define READ_BLOCK_LIMITS     0x05
+#define REASSIGN_BLOCKS       0x07
+#define INITIALIZE_ELEMENT_STATUS 0x07
+#define READ_6                0x08
+#define WRITE_6               0x0a
+#define SEEK_6                0x0b
+#define READ_REVERSE          0x0f
+#define WRITE_FILEMARKS       0x10
+#define SPACE                 0x11
+#define INQUIRY               0x12
+#define RECOVER_BUFFERED_DATA 0x14
+#define MODE_SELECT           0x15
+#define RESERVE               0x16
+#define RELEASE               0x17
+#define COPY                  0x18
+#define ERASE                 0x19
+#define MODE_SENSE            0x1a
+#define START_STOP            0x1b
+#define RECEIVE_DIAGNOSTIC    0x1c
+#define SEND_DIAGNOSTIC       0x1d
+#define ALLOW_MEDIUM_REMOVAL  0x1e
+
+#define READ_FORMAT_CAPACITIES 0x23
+#define SET_WINDOW            0x24
+#define READ_CAPACITY         0x25
+#define READ_10               0x28
+#define WRITE_10              0x2a
+#define SEEK_10               0x2b
+#define POSITION_TO_ELEMENT   0x2b
+#define WRITE_VERIFY          0x2e
+#define VERIFY                0x2f
+#define SEARCH_HIGH           0x30
+#define SEARCH_EQUAL          0x31
+#define SEARCH_LOW            0x32
+#define SET_LIMITS            0x33
+#define PRE_FETCH             0x34
+#define READ_POSITION         0x34
+#define SYNCHRONIZE_CACHE     0x35
+#define LOCK_UNLOCK_CACHE     0x36
+#define READ_DEFECT_DATA      0x37
+#define MEDIUM_SCAN           0x38
+#define COMPARE               0x39
+#define COPY_VERIFY           0x3a
+#define WRITE_BUFFER          0x3b
+#define READ_BUFFER           0x3c
+#define UPDATE_BLOCK          0x3d
+#define READ_LONG             0x3e
+#define WRITE_LONG            0x3f
+#define CHANGE_DEFINITION     0x40
+#define WRITE_SAME            0x41
+#define UNMAP		      0x42
+#define READ_TOC              0x43
+#define READ_HEADER           0x44
+#define GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define LOG_SELECT            0x4c
+#define LOG_SENSE             0x4d
+#define XDWRITEREAD_10        0x53
+#define MODE_SELECT_10        0x55
+#define RESERVE_10            0x56
+#define RELEASE_10            0x57
+#define MODE_SENSE_10         0x5a
+#define PERSISTENT_RESERVE_IN 0x5e
+#define PERSISTENT_RESERVE_OUT 0x5f
+#define VARIABLE_LENGTH_CMD   0x7f
+#define REPORT_LUNS           0xa0
+#define SECURITY_PROTOCOL_IN  0xa2
+#define MAINTENANCE_IN        0xa3
+#define MAINTENANCE_OUT       0xa4
+#define MOVE_MEDIUM           0xa5
+#define EXCHANGE_MEDIUM       0xa6
+#define READ_12               0xa8
+#define WRITE_12              0xaa
+#define READ_MEDIA_SERIAL_NUMBER 0xab
+#define WRITE_VERIFY_12       0xae
+#define VERIFY_12	      0xaf
+#define SEARCH_HIGH_12        0xb0
+#define SEARCH_EQUAL_12       0xb1
+#define SEARCH_LOW_12         0xb2
+#define SECURITY_PROTOCOL_OUT 0xb5
+#define READ_ELEMENT_STATUS   0xb8
+#define SEND_VOLUME_TAG       0xb6
+#define WRITE_LONG_2          0xea
+#define EXTENDED_COPY         0x83
+#define RECEIVE_COPY_RESULTS  0x84
+#define ACCESS_CONTROL_IN     0x86
+#define ACCESS_CONTROL_OUT    0x87
+#define READ_16               0x88
+#define COMPARE_AND_WRITE     0x89
+#define WRITE_16              0x8a
+#define READ_ATTRIBUTE        0x8c
+#define WRITE_ATTRIBUTE	      0x8d
+#define VERIFY_16	      0x8f
+#define SYNCHRONIZE_CACHE_16  0x91
+#define WRITE_SAME_16	      0x93
+#define SERVICE_ACTION_IN     0x9e
+/* values for service action in */
+#define	SAI_READ_CAPACITY_16  0x10
+#define SAI_GET_LBA_STATUS    0x12
+#define SAI_REPORT_REFERRALS  0x13
+/* values for VARIABLE_LENGTH_CMD service action codes
+ * see spc4r17 Section D.3.5, table D.7 and D.8 */
+#define VLC_SA_RECEIVE_CREDENTIAL 0x1800
+/* values for maintenance in */
+#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
+#define MI_REPORT_TARGET_PGS  0x0a
+#define MI_REPORT_ALIASES     0x0b
+#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
+#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
+#define MI_REPORT_PRIORITY   0x0e
+#define MI_REPORT_TIMESTAMP  0x0f
+#define MI_MANAGEMENT_PROTOCOL_IN 0x10
+/* value for MI_REPORT_TARGET_PGS ext header */
+#define MI_EXT_HDR_PARAM_FMT  0x20
+/* values for maintenance out */
+#define MO_SET_IDENTIFYING_INFORMATION 0x06
+#define MO_SET_TARGET_PGS     0x0a
+#define MO_CHANGE_ALIASES     0x0b
+#define MO_SET_PRIORITY       0x0e
+#define MO_SET_TIMESTAMP      0x0f
+#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
+/* values for variable length command */
+#define XDREAD_32	      0x03
+#define XDWRITE_32	      0x04
+#define XPWRITE_32	      0x06
+#define XDWRITEREAD_32	      0x07
+#define READ_32		      0x09
+#define VERIFY_32	      0x0a
+#define WRITE_32	      0x0b
+#define WRITE_SAME_32	      0x0d
+
+/* Values for T10/04-262r7 */
+#define	ATA_16		      0x85	/* 16-byte pass-thru */
+#define	ATA_12		      0xa1	/* 12-byte pass-thru */
+
+/*
+ *	SCSI command lengths
+ */
+
+#define SCSI_MAX_VARLEN_CDB_SIZE 260
+
+/* defined in T10 SCSI Primary Commands-2 (SPC2) */
+struct scsi_varlen_cdb_hdr {
+	__u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
+	__u8 control;
+	__u8 misc[5];
+	__u8 additional_cdb_length;         /* total cdb length - 8 */
+	__be16 service_action;
+	/* service specific data follows */
+};
+
+static inline unsigned
+scsi_varlen_cdb_length(const void *hdr)
+{
+	return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
+}
+
+extern const unsigned char scsi_command_size_tbl[8];
+#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
+
+static inline unsigned
+scsi_command_size(const unsigned char *cmnd)
+{
+	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
+}
+
+#ifdef CONFIG_ACPI
+struct acpi_bus_type;
+
+extern int
+scsi_register_acpi_bus_type(struct acpi_bus_type *bus);
+
+extern void
+scsi_unregister_acpi_bus_type(struct acpi_bus_type *bus);
+#endif
+
+/*
+ *  SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
+ *  T10/1561-D Revision 4 Draft dated 7th November 2002.
+ */
+#define SAM_STAT_GOOD            0x00
+#define SAM_STAT_CHECK_CONDITION 0x02
+#define SAM_STAT_CONDITION_MET   0x04
+#define SAM_STAT_BUSY            0x08
+#define SAM_STAT_INTERMEDIATE    0x10
+#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
+#define SAM_STAT_RESERVATION_CONFLICT 0x18
+#define SAM_STAT_COMMAND_TERMINATED 0x22	/* obsolete in SAM-3 */
+#define SAM_STAT_TASK_SET_FULL   0x28
+#define SAM_STAT_ACA_ACTIVE      0x30
+#define SAM_STAT_TASK_ABORTED    0x40
+
+/** scsi_status_is_good - check the status return.
+ *
+ * @status: the status passed up from the driver (including host and
+ *          driver components)
+ *
+ * This returns true for known good conditions that may be treated as
+ * command completed normally
+ */
+static inline int scsi_status_is_good(int status)
+{
+	/*
+	 * FIXME: bit0 is listed as reserved in SCSI-2, but is
+	 * significant in SCSI-3.  For now, we follow the SCSI-2
+	 * behaviour and ignore reserved bits.
+	 */
+	status &= 0xfe;
+	return ((status == SAM_STAT_GOOD) ||
+		(status == SAM_STAT_INTERMEDIATE) ||
+		(status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
+		/* FIXME: this is obsolete in SAM-3 */
+		(status == SAM_STAT_COMMAND_TERMINATED));
+}
+
+/*
+ *  Status codes. These are deprecated as they are shifted 1 bit right
+ *  from those found in the SCSI standards. This causes confusion for
+ *  applications that are ported to several OSes. Prefer SAM Status codes
+ *  above.
+ */
+
+#define GOOD                 0x00
+#define CHECK_CONDITION      0x01
+#define CONDITION_GOOD       0x02
+#define BUSY                 0x04
+#define INTERMEDIATE_GOOD    0x08
+#define INTERMEDIATE_C_GOOD  0x0a
+#define RESERVATION_CONFLICT 0x0c
+#define COMMAND_TERMINATED   0x11
+#define QUEUE_FULL           0x14
+#define ACA_ACTIVE           0x18
+#define TASK_ABORTED         0x20
+
+#define STATUS_MASK          0xfe
+
+/*
+ *  SENSE KEYS
+ */
+
+#define NO_SENSE            0x00
+#define RECOVERED_ERROR     0x01
+#define NOT_READY           0x02
+#define MEDIUM_ERROR        0x03
+#define HARDWARE_ERROR      0x04
+#define ILLEGAL_REQUEST     0x05
+#define UNIT_ATTENTION      0x06
+#define DATA_PROTECT        0x07
+#define BLANK_CHECK         0x08
+#define COPY_ABORTED        0x0a
+#define ABORTED_COMMAND     0x0b
+#define VOLUME_OVERFLOW     0x0d
+#define MISCOMPARE          0x0e
+
+
+/*
+ *  DEVICE TYPES
+ *  Please keep them in 0x%02x format for $MODALIAS to work
+ */
+
+#define TYPE_DISK           0x00
+#define TYPE_TAPE           0x01
+#define TYPE_PRINTER        0x02
+#define TYPE_PROCESSOR      0x03    /* HP scanners use this */
+#define TYPE_WORM           0x04    /* Treated as ROM by our system */
+#define TYPE_ROM            0x05
+#define TYPE_SCANNER        0x06
+#define TYPE_MOD            0x07    /* Magneto-optical disk - 
+				     * - treated as TYPE_DISK */
+#define TYPE_MEDIUM_CHANGER 0x08
+#define TYPE_COMM           0x09    /* Communications device */
+#define TYPE_RAID           0x0c
+#define TYPE_ENCLOSURE      0x0d    /* Enclosure Services Device */
+#define TYPE_RBC	    0x0e
+#define TYPE_OSD            0x11
+#define TYPE_NO_LUN         0x7f
+
+/* SCSI protocols; these are taken from SPC-3 section 7.5 */
+enum scsi_protocol {
+	SCSI_PROTOCOL_FCP = 0,	/* Fibre Channel */
+	SCSI_PROTOCOL_SPI = 1,	/* parallel SCSI */
+	SCSI_PROTOCOL_SSA = 2,	/* Serial Storage Architecture - Obsolete */
+	SCSI_PROTOCOL_SBP = 3,	/* firewire */
+	SCSI_PROTOCOL_SRP = 4,	/* Infiniband RDMA */
+	SCSI_PROTOCOL_ISCSI = 5,
+	SCSI_PROTOCOL_SAS = 6,
+	SCSI_PROTOCOL_ADT = 7,	/* Media Changers */
+	SCSI_PROTOCOL_ATA = 8,
+	SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
+};
+
+/* Returns a human-readable name for the device */
+extern const char * scsi_device_type(unsigned type);
+
+/*
+ * standard mode-select header prepended to all mode-select commands
+ */
+
+struct ccs_modesel_head {
+	__u8 _r1;			/* reserved */
+	__u8 medium;		/* device-specific medium type */
+	__u8 _r2;			/* reserved */
+	__u8 block_desc_length;	/* block descriptor length */
+	__u8 density;		/* device-specific density code */
+	__u8 number_blocks_hi;	/* number of blocks in this block desc */
+	__u8 number_blocks_med;
+	__u8 number_blocks_lo;
+	__u8 _r3;
+	__u8 block_length_hi;	/* block length for blocks in this desc */
+	__u8 block_length_med;
+	__u8 block_length_lo;
+};
+
+/*
+ * ScsiLun: 8 byte LUN.
+ */
+struct scsi_lun {
+	__u8 scsi_lun[8];
+};
+
+/*
+ * The Well Known LUNS (SAM-3) in our int representation of a LUN
+ */
+#define SCSI_W_LUN_BASE 0xc100
+#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
+#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
+#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
+
+static inline int scsi_is_wlun(unsigned int lun)
+{
+	return (lun & 0xff00) == SCSI_W_LUN_BASE;
+}
+
+
+/*
+ *  MESSAGE CODES
+ */
+
+#define COMMAND_COMPLETE    0x00
+#define EXTENDED_MESSAGE    0x01
+#define     EXTENDED_MODIFY_DATA_POINTER    0x00
+#define     EXTENDED_SDTR                   0x01
+#define     EXTENDED_EXTENDED_IDENTIFY      0x02    /* SCSI-I only */
+#define     EXTENDED_WDTR                   0x03
+#define     EXTENDED_PPR                    0x04
+#define     EXTENDED_MODIFY_BIDI_DATA_PTR   0x05
+#define SAVE_POINTERS       0x02
+#define RESTORE_POINTERS    0x03
+#define DISCONNECT          0x04
+#define INITIATOR_ERROR     0x05
+#define ABORT_TASK_SET      0x06
+#define MESSAGE_REJECT      0x07
+#define NOP                 0x08
+#define MSG_PARITY_ERROR    0x09
+#define LINKED_CMD_COMPLETE 0x0a
+#define LINKED_FLG_CMD_COMPLETE 0x0b
+#define TARGET_RESET        0x0c
+#define ABORT_TASK          0x0d
+#define CLEAR_TASK_SET      0x0e
+#define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
+#define RELEASE_RECOVERY    0x10            /* SCSI-II only */
+#define CLEAR_ACA           0x16
+#define LOGICAL_UNIT_RESET  0x17
+#define SIMPLE_QUEUE_TAG    0x20
+#define HEAD_OF_QUEUE_TAG   0x21
+#define ORDERED_QUEUE_TAG   0x22
+#define IGNORE_WIDE_RESIDUE 0x23
+#define ACA                 0x24
+#define QAS_REQUEST         0x55
+
+/* Old SCSI2 names, don't use in new code */
+#define BUS_DEVICE_RESET    TARGET_RESET
+#define ABORT               ABORT_TASK_SET
+
+/*
+ * Host byte codes
+ */
+
+#define DID_OK          0x00	/* NO error                                */
+#define DID_NO_CONNECT  0x01	/* Couldn't connect before timeout period  */
+#define DID_BUS_BUSY    0x02	/* BUS stayed busy through time out period */
+#define DID_TIME_OUT    0x03	/* TIMED OUT for other reason              */
+#define DID_BAD_TARGET  0x04	/* BAD target.                             */
+#define DID_ABORT       0x05	/* Told to abort for some other reason     */
+#define DID_PARITY      0x06	/* Parity error                            */
+#define DID_ERROR       0x07	/* Internal error                          */
+#define DID_RESET       0x08	/* Reset by somebody.                      */
+#define DID_BAD_INTR    0x09	/* Got an interrupt we weren't expecting.  */
+#define DID_PASSTHROUGH 0x0a	/* Force command past mid-layer            */
+#define DID_SOFT_ERROR  0x0b	/* The low level driver just wish a retry  */
+#define DID_IMM_RETRY   0x0c	/* Retry without decrementing retry count  */
+#define DID_REQUEUE	0x0d	/* Requeue command (no immediate retry) also
+				 * without decrementing the retry count	   */
+#define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution
+				      * and the driver blocked the port to
+				      * recover the link. Transport class will
+				      * retry or fail IO */
+#define DID_TRANSPORT_FAILFAST	0x0f /* Transport class fastfailed the io */
+#define DID_TARGET_FAILURE 0x10 /* Permanent target failure, do not retry on
+				 * other paths */
+#define DID_NEXUS_FAILURE 0x11  /* Permanent nexus failure, retry on other
+				 * paths might yield different results */
+#define DID_ALLOC_FAILURE 0x12  /* Space allocation on the device failed */
+#define DID_MEDIUM_ERROR  0x13  /* Medium error */
+#define DRIVER_OK       0x00	/* Driver status                           */
+
+/*
+ *  These indicate the error that occurred, and what is available.
+ */
+
+#define DRIVER_BUSY         0x01
+#define DRIVER_SOFT         0x02
+#define DRIVER_MEDIA        0x03
+#define DRIVER_ERROR        0x04
+
+#define DRIVER_INVALID      0x05
+#define DRIVER_TIMEOUT      0x06
+#define DRIVER_HARD         0x07
+#define DRIVER_SENSE	    0x08
+
+/*
+ * Internal return values.
+ */
+
+#define NEEDS_RETRY     0x2001
+#define SUCCESS         0x2002
+#define FAILED          0x2003
+#define QUEUED          0x2004
+#define SOFT_ERROR      0x2005
+#define ADD_TO_MLQUEUE  0x2006
+#define TIMEOUT_ERROR   0x2007
+#define SCSI_RETURN_NOT_HANDLED   0x2008
+#define FAST_IO_FAIL	0x2009
+
+/*
+ * Midlevel queue return values.
+ */
+#define SCSI_MLQUEUE_HOST_BUSY   0x1055
+#define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
+#define SCSI_MLQUEUE_EH_RETRY    0x1057
+#define SCSI_MLQUEUE_TARGET_BUSY 0x1058
+
+/*
+ *  Use these to separate status msg and our bytes
+ *
+ *  These are set by:
+ *
+ *      status byte = set from target device
+ *      msg_byte    = return status from host adapter itself.
+ *      host_byte   = set by low-level driver to indicate status.
+ *      driver_byte = set by mid-level.
+ */
+#define status_byte(result) (((result) >> 1) & 0x7f)
+#define msg_byte(result)    (((result) >> 8) & 0xff)
+#define host_byte(result)   (((result) >> 16) & 0xff)
+#define driver_byte(result) (((result) >> 24) & 0xff)
+
+#define sense_class(sense)  (((sense) >> 4) & 0x7)
+#define sense_error(sense)  ((sense) & 0xf)
+#define sense_valid(sense)  ((sense) & 0x80)
+
+/*
+ * default timeouts
+*/
+#define FORMAT_UNIT_TIMEOUT		(2 * 60 * 60 * HZ)
+#define START_STOP_TIMEOUT		(60 * HZ)
+#define MOVE_MEDIUM_TIMEOUT		(5 * 60 * HZ)
+#define READ_ELEMENT_STATUS_TIMEOUT	(5 * 60 * HZ)
+#define READ_DEFECT_DATA_TIMEOUT	(60 * HZ )
+
+
+#define IDENTIFY_BASE       0x80
+#define IDENTIFY(can_disconnect, lun)   (IDENTIFY_BASE |\
+		     ((can_disconnect) ?  0x40 : 0) |\
+		     ((lun) & 0x07))
+
+/*
+ *  struct scsi_device::scsi_level values. For SCSI devices other than those
+ *  prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
+ *  where "resp" is a byte array of the response to an INQUIRY. The scsi_level
+ *  variable is visible to the user via sysfs.
+ */
+
+#define SCSI_UNKNOWN    0
+#define SCSI_1          1
+#define SCSI_1_CCS      2
+#define SCSI_2          3
+#define SCSI_3          4        /* SPC */
+#define SCSI_SPC_2      5
+#define SCSI_SPC_3      6
+
+/*
+ * INQ PERIPHERAL QUALIFIERS
+ */
+#define SCSI_INQ_PQ_CON         0x00
+#define SCSI_INQ_PQ_NOT_CON     0x01
+#define SCSI_INQ_PQ_NOT_CAP     0x03
+
+
+/*
+ * Here are some scsi specific ioctl commands which are sometimes useful.
+ *
+ * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
+ */
+
+/* Used to obtain PUN and LUN info.  Conflicts with CDROMAUDIOBUFSIZ */
+#define SCSI_IOCTL_GET_IDLUN		0x5382
+
+/* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
+
+/* Used to obtain the host number of a device. */
+#define SCSI_IOCTL_PROBE_HOST		0x5385
+
+/* Used to obtain the bus number for a device */
+#define SCSI_IOCTL_GET_BUS_NUMBER	0x5386
+
+/* Used to obtain the PCI location of a device */
+#define SCSI_IOCTL_GET_PCI		0x5387
+
+/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
+static inline __u32 scsi_to_u32(__u8 *ptr)
+{
+	return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
+}
+
+#endif /* _SCSI_SCSI_H */

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/scsi/scsi_cmnd.h

@@ -0,0 +1,84 @@
+#ifndef __SCSI_CMND_H_
+#define __SCSI_CMND_H_
+
+#include "us_usb.h"
+#include "us_os_wrap_via_osdep_api.h"
+#include <scsi/scsi.h>
+#include <scsi/dma_direction.h>
+#include <scatterlist/scatterlist.h>
+/**
+ * define flash block size
+ */
+#define BLOCK_SIZE					512
+
+struct scsi_data_buffer {
+	struct sg_table table;
+	unsigned char *data_buffer; /* Data buffer to store read data */
+	unsigned length;
+	int resid;
+};
+
+struct scsi_cmnd{
+	int result;		/* Status code from lower level driver */
+
+	unsigned int channel,id,lun;
+	enum dma_data_direction sc_data_direction;
+	unsigned short cmd_len;
+	unsigned length;
+	_Sema cmnd_done;
+
+	int eh_eflags;		/* Used by error handlr */
+
+	struct scsi_data_buffer sdb;
+
+	unsigned long sector;/* Sector address in LBA */
+	unsigned int count;/* Number of sectors to read */
+	void *request_buffer;
+
+	 /* These elements define the operation we are about to perform */
+#define MAX_COMMAND_SIZE	16
+	unsigned char cmnd[MAX_COMMAND_SIZE];
+
+#define SCSI_SENSE_BUFFERSIZE 	96
+	unsigned char *sense_buffer;		/* obtained by REQUEST SENSE
+						 * when CHECK CONDITION is
+						 * received on original command
+						 * (auto-sense) */
+
+	/* Low-level done function - can be used by low-level driver to point
+		 *        to completion function.  Not used by mid/upper level code. */
+	void (*scsi_done) (struct scsi_cmnd *);
+
+	unsigned underflow;	/* Return error if less than
+						   this amount is transferred */
+};
+
+static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd)
+{
+	return cmd->sdb.table.nents;
+}
+
+static inline struct scatterlist *scsi_sglist(struct scsi_cmnd *cmd)
+{
+	return cmd->sdb.table.sgl;
+}
+
+static inline void scsi_set_resid(struct scsi_cmnd *cmd, int resid)
+{
+	cmd->sdb.resid = resid;
+}
+//
+static inline int scsi_get_resid(struct scsi_cmnd *cmd)
+{
+	return cmd->sdb.resid;
+}
+static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd)
+{
+	return cmd->sdb.length;
+}
+
+extern int scsi_cmnd_execute(char cmnd, unsigned char * _buff,
+		unsigned long _sector, unsigned int _count);
+
+#endif
+

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/scsi/scsi_eh.h

@@ -0,0 +1,52 @@
+#ifndef _SCSI_EH_H_
+#define _SCSI_EH_H_
+
+#include "scsi/scsi_cmnd.h"
+#include "dma_direction.h"
+
+#define BLK_MAX_CDB	16
+/*
+ * This is a slightly modified SCSI sense "descriptor" format header.
+ * The addition is to allow the 0x70 and 0x71 response codes. The idea
+ * is to place the salient data from either "fixed" or "descriptor" sense
+ * format into one structure to ease application processing.
+ *
+ * The original sense buffer should be kept around for those cases
+ * in which more information is required (e.g. the LBA of a MEDIUM ERROR).
+ */
+struct scsi_sense_hdr {		/* See SPC-3 section 4.5 */
+	u8 response_code;	/* permit: 0x0, 0x70, 0x71, 0x72, 0x73 */
+	u8 sense_key;
+	u8 asc;
+	u8 ascq;
+	u8 byte4;
+	u8 byte5;
+	u8 byte6;
+	u8 additional_length;	/* always 0 for fixed sense format */
+};
+
+static inline int scsi_sense_valid(struct scsi_sense_hdr *sshdr)
+{
+	if (!sshdr)
+		return 0;
+	return (sshdr->response_code & 0x70) == 0x70;
+}
+
+struct scsi_eh_save {
+	/* saved state */
+	int result;
+	enum dma_data_direction data_direction;
+	unsigned underflow;
+	unsigned char cmd_len;
+//	unsigned char prot_op;
+	unsigned char cmnd[BLK_MAX_CDB];
+	struct scsi_data_buffer sdb;
+//	struct request *next_rq;
+	/* new command support */
+	unsigned char eh_cmnd[BLK_MAX_CDB];
+//	struct scatterlist sense_sgl;
+};
+const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len,
+				int desc_type);
+#endif
+

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/storage.h

@@ -0,0 +1,78 @@
+#ifndef __STORAGE_H
+#define __STORAGE_H
+
+#include "us_os_wrap_via_osdep_api.h"
+/* Storage subclass codes */
+
+#define USB_SC_RBC			0x01		/* Typically, flash devices */
+#define USB_SC_8020			0x02		/* CD-ROM */
+#define USB_SC_QIC			0x03		/* QIC-157 Tapes */
+#define USB_SC_UFI			0x04		/* Floppy */
+#define USB_SC_8070			0x05		/* Removable media */
+#define USB_SC_SCSI			0x06		/* Transparent */
+#define USB_SC_LOCKABLE		0x07		/* Password-protected */
+
+#define USB_SC_ISD200		0xf0		/* ISD200 ATA */
+#define USB_SC_CYP_ATACB	0xf1		/* Cypress ATACB */
+#define USB_SC_DEVICE		0xff		/* Use device's value */
+
+/* Storage protocol codes */
+
+#define USB_PR_CBI			0x00		/* Control/Bulk/Interrupt */
+#define USB_PR_CB			0x01		/* Control/Bulk w/o interrupt */
+#define USB_PR_BULK			0x50		/* bulk only */
+#define USB_PR_UAS			0x62		/* USB Attached SCSI */
+
+#define USB_PR_USBAT		0x80		/* SCM-ATAPI bridge */
+#define USB_PR_EUSB_SDDR09	0x81		/* SCM-SCSI bridge for SDDR-09 */
+#define USB_PR_SDDR55		0x82		/* SDDR-55 (made up) */
+#define USB_PR_DPCM_USB		0xf0		/* Combination CB/SDDR09 */
+#define USB_PR_FREECOM		0xf1		/* Freecom */
+#define USB_PR_DATAFAB		0xf2		/* Datafab chipsets */
+#define USB_PR_JUMPSHOT		0xf3		/* Lexar Jumpshot */
+#define USB_PR_ALAUDA		0xf4		/* Alauda chipsets */
+#define USB_PR_KARMA		0xf5		/* Rio Karma */
+
+#define USB_PR_DEVICE		0xff		/* Use device's value */
+
+/*
+* Bulk only data structures
+*/
+
+/* command block wrapper */
+struct bulk_cb_wrap {
+	__le32	Signature;		/* contains 'USBC', denote bulk_cb_wrap */
+	__u32	Tag;			/* unique per command id */
+	__le32	DataTransferLength;	/* size of data for transfer */
+	__u8	Flags;			/* data transfer direction */
+	__u8	Lun;			/* LUN normally 0, (which command block is sent) */
+	__u8	Length;			/* length of the CDB */
+	__u8	CDB[16];		/* max command */
+};
+
+#define US_BULK_CB_WRAP_LEN	31
+#define US_BULK_CB_SIGN		0x43425355	/*spells out USBC */
+#define US_BULK_FLAG_IN		(1 << 7)
+#define US_BULK_FLAG_OUT	0
+
+/* command status wrapper */
+struct bulk_cs_wrap {
+	__le32	Signature;	/* should = 'USBS' */
+	__u32	Tag;		/* same as original command, echoed by the device as received */
+	__le32	Residue;	/* amount not transferred */
+	__u8	Status;		/* execute command status */
+};
+
+#define US_BULK_CS_WRAP_LEN	13
+#define US_BULK_CS_SIGN		0x53425355      /* spells out 'USBS' */
+// execute command status
+#define US_BULK_STAT_OK		0
+#define US_BULK_STAT_FAIL	1
+#define US_BULK_STAT_PHASE	2
+
+/* bulk-only class specific requests */
+#define US_BULK_RESET_REQUEST   0xff
+#define US_BULK_GET_MAX_LUN     0xfe
+
+#endif
+

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/transport.h

@@ -0,0 +1,102 @@
+/* Driver for USB Mass Storage compliant devices
+ * Transport Functions Header File
+ *
+ * Current development and maintenance by:
+ *   (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
+ *
+ * This driver is based on the 'USB Mass Storage Class' document. This
+ * describes in detail the protocol used to communicate with such
+ * devices.  Clearly, the designers had SCSI and ATAPI commands in
+ * mind when they created this document.  The commands are all very
+ * similar to commands in the SCSI-II and ATAPI specifications.
+ *
+ * It is important to note that in a number of cases this class
+ * exhibits class-specific exemptions from the USB specification.
+ * Notably the usage of NAK, STALL and ACK differs from the norm, in
+ * that they are used to communicate wait, failed and OK on commands.
+ *
+ * Also, for certain devices, the interrupt endpoint is used to convey
+ * status of a command.
+ *
+ * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
+ * information about this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _US_TRANSPORT_H_
+#define _US_TRANSPORT_H_
+#if 0
+#include <linux/blkdev.h>
+#endif
+/*
+ * usb_stor_bulk_transfer_xxx() return codes, in order of severity
+ */
+
+#define USB_STOR_XFER_GOOD	0	/* good transfer                 */
+#define USB_STOR_XFER_SHORT	1	/* transferred less than expected */
+#define USB_STOR_XFER_STALLED	2	/* endpoint stalled              */
+#define USB_STOR_XFER_LONG	3	/* device tried to send too much */
+#define USB_STOR_XFER_ERROR	4	/* transfer died in the middle   */
+
+/*
+ * Transport return codes
+ */
+
+#define USB_STOR_TRANSPORT_GOOD	   0   /* Transport good, command good	   */
+#define USB_STOR_TRANSPORT_FAILED  1   /* Transport good, command failed   */
+#define USB_STOR_TRANSPORT_NO_SENSE 2  /* Command failed, no auto-sense    */
+#define USB_STOR_TRANSPORT_ERROR   3   /* Transport bad (i.e. device dead) */
+
+/*
+ * We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED
+ * return codes.  But now the transport and low-level transfer routines
+ * treat an abort as just another error (-ENOENT for a cancelled URB).
+ * It is up to the invoke_transport() function to test for aborts and
+ * distinguish them from genuine communication errors.
+ */
+
+/*
+ * CBI accept device specific command
+ */
+#define US_CBI_ADSC		0
+
+//extern int usb_stor_CB_transport(struct scsi_cmnd *, struct us_data*);
+//extern int usb_stor_CB_reset(struct us_data*);
+//
+//extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data*);
+//extern int usb_stor_Bulk_max_lun(struct us_data*);
+//extern int usb_stor_Bulk_reset(struct us_data*);
+//
+//extern void usb_stor_invoke_transport(struct scsi_cmnd *, struct us_data*);
+//extern void usb_stor_stop_transport(struct us_data*);
+
+//extern int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
+//		u8 request, u8 requesttype, u16 value, u16 index,
+//		void *data, u16 size, int timeout);
+//extern int usb_stor_clear_halt(struct us_data *us, unsigned int pipe);
+//
+//extern int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
+//		u8 request, u8 requesttype, u16 value, u16 index,
+//		void *data, u16 size);
+//extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
+//		void *buf, unsigned int length, unsigned int *act_len);
+//extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe,
+//		void *buf, unsigned int length, int use_sg, int *residual);
+//extern int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
+//		struct scsi_cmnd* srb);
+//
+//extern int usb_stor_port_reset(struct us_data *us);
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/unusual_usbat.h

@@ -0,0 +1,32 @@
+#ifndef __UNUSUAL_USBAT_H
+#define __UNUSUAL_USBAT_H
+
+#if defined(CONFIG_USB_STORAGE_USBAT) || \
+		defined(CONFIG_USB_STORAGE_USBAT_MODULE)
+
+UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
+		"HP",
+		"CD-Writer+ 8200e",
+		USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
+
+UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
+		"HP",
+		"CD-Writer+ CD-4e",
+		USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
+
+UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
+		"Shuttle/SCM",
+		"USBAT-02",
+		USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
+		US_FL_SINGLE_LUN),
+
+UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
+		"Sandisk",
+		"ImageMate SDDR-05b",
+		USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
+		US_FL_SINGLE_LUN),
+
+#endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */
+
+#endif
+

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/us_debug.h

@@ -0,0 +1,26 @@
+#ifndef _US_DEBUG_H_
+#define _US_DEBUG_H_
+
+#include "diag.h"
+
+
+#define US_DEBUG    0
+#define US_DRIVER	"US_DRIVER"
+
+#if US_DEBUG
+#define US_INFO(fmt, args...)		            DBG_8195A("\n\r[%s]%s: " fmt, US_DRIVER, __FUNCTION__, ## args)
+#define US_ERR(fmt, args...)		            DBG_8195A("\n\r[%s]%s: " fmt, US_DRIVER,__FUNCTION__, ## args)
+#define US_WARN(fmt, args...)		            DBG_8195A("\n\r[%s]%s: " fmt, US_DRIVER,__FUNCTION__, ## args)
+#define FUN_ENTER                               DBG_8195A("\n\r[%s]%s ==>\n", US_DRIVER,__FUNCTION__)
+#define FUN_EXIT                                DBG_8195A("\n\r[%s]%s <==\n", US_DRIVER,__FUNCTION__)
+#define FUN_TRACE                               DBG_8195A("\n\r[%s]%s:%d \n", US_DRIVER,__FUNCTION__, __LINE__)
+#else
+#define US_INFO(fmt, args...)
+#define US_ERR(fmt, args...)		            DBG_8195A("\n\r[%s]%s: " fmt, US_DRIVER,__FUNCTION__, ## args)
+#define US_WARN(fmt, args...)
+#define FUN_ENTER
+#define FUN_EXIT
+#define FUN_TRACE
+#endif
+
+#endif /* _US_DEBUG_H_ */

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/us_initializers.h

@@ -0,0 +1,14 @@
+#include "usb.h"
+#include "transport.h"
+
+/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
+ * mode */
+int usb_stor_euscsi_init(struct us_data *us);
+
+/* This function is required to activate all four slots on the UCR-61S2B
+ * flash reader */
+int usb_stor_ucr61s2b_init(struct us_data *us);
+
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
+

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/us_intf.h

@@ -0,0 +1,34 @@
+#ifndef __US_INTF_H_
+#define __US_INTF_H_
+
+#include "basic_types.h"
+
+typedef enum
+{
+  MSC_OK = 0,
+  MSC_NOT_READY,
+  MSC_W_PROTECT,
+  MSC_ERROR,
+}MSC_RESULT;
+
+extern MSC_RESULT	us_init(void);
+extern MSC_RESULT	us_isready (void);
+
+extern MSC_RESULT 	us_getStatus(void);
+extern MSC_RESULT	us_getmaxlun (u8* lun_num);
+extern MSC_RESULT	us_unitisready (u8 lun);
+
+extern MSC_RESULT	us_inquiry (u8 *pbuf);
+
+extern MSC_RESULT	us_getcap(u32 *last_blk_addr, u32 *block_size);
+
+extern MSC_RESULT	us_read_blocks( u8 *pbuf, u32 sector, u32 count);
+
+extern MSC_RESULT	us_write_blocks( const u8 *pbuf, u32 sector, u32 count);
+
+
+// indicate usb storage driver status
+extern bool USB_STORAGE_READY;
+
+#endif
+

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/us_os_wrap_via_osdep_api.h

@@ -0,0 +1,313 @@
+/*
+ * umsc_os_wrap_via_osdep_api.h
+ *
+ *  Created on: Sep 5, 2014
+ *      Author: jimmysqf
+ */
+
+#ifndef US_OS_WRAP_VIA_OSDEP_API_H_
+#define US_OS_WRAP_VIA_OSDEP_API_H_
+
+#include "basic_types.h"
+#include "osdep_api.h"
+
+#define GFP_KERNEL		1
+#define GFP_ATOMIC		1
+
+
+typedef unsigned int gfp_t;
+
+/* misc items */
+#ifndef ssize_t
+#define ssize_t SSIZE_T
+#endif
+#ifndef size_t
+#define size_t SIZE_T
+#endif
+
+#ifndef __user
+#define __user
+#endif
+
+#ifndef loff_t
+#define loff_t long
+#endif
+#ifndef __u8
+#define __u8 	u8
+#endif
+#ifndef __u16
+#define __u16	u16
+#endif
+#ifndef __u32
+#define __u32	u32
+#endif
+#ifndef __u64
+#define __u64	u64
+#endif
+#ifndef __s8
+#define __s8	s8
+#endif
+#ifndef __s16
+#define __s16	s16
+#endif
+#ifndef __s32
+#define __s32	s32
+#endif
+#ifndef __s64
+#define __s64	s64
+#endif
+
+typedef __u16 __le16;
+typedef __u16 __be16;
+typedef __u32 __le32;
+typedef __u32 __be32;
+typedef __u64 __le64;
+typedef __u64 __be64;
+typedef __u16 __sum16;
+typedef __u32 __wsum;
+
+
+#ifndef cpu_to_le32
+
+#define cpu_to_le32(x)	rtk_cpu_to_le32(x)
+#endif
+#ifndef le32_to_cpu
+
+#define le32_to_cpu(x)	rtk_le32_to_cpu(x)
+#endif
+#ifndef cpu_to_le16
+
+#define cpu_to_le16(x)	rtk_cpu_to_le16(x)
+#endif
+#ifndef le16_to_cpu
+
+#define le16_to_cpu(x)	rtk_le16_to_cpu(x)
+#endif
+#ifndef cpu_to_be32
+
+#define cpu_to_be32(x)	rtk_cpu_to_be32(x)
+#endif
+#ifndef be32_to_cpu
+
+#define be32_to_cpu(x)	rtk_be32_to_cpu(x)
+#endif
+#ifndef cpu_to_be16
+
+#define cpu_to_be16(x)	rtk_cpu_to_be16(x)
+#endif
+#ifndef be16_to_cpu
+
+#define be16_to_cpu(x)	rtk_be16_to_cpu(x)
+#endif
+
+#ifndef DIV_ROUND_UP
+#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
+#endif
+#ifndef BITS_PER_LONG
+#define BITS_PER_LONG (32)
+#endif
+#ifndef BITS_PER_LONG_LONG
+#define BITS_PER_LONG_LONG (32)
+#endif
+#ifndef BIT
+#define BIT(nr)                 (1UL << (nr))
+#endif
+#ifndef BIT_ULL
+#define BIT_ULL(nr)             (1ULL << (nr))
+#endif
+#ifndef BIT_MASK
+#define BIT_MASK(nr)            (1UL << ((nr) % BITS_PER_LONG))
+#endif
+#ifndef BIT_WORD
+#define BIT_WORD(nr)            ((nr) / BITS_PER_LONG)
+#endif
+#ifndef BIT_ULL_MASK
+#define BIT_ULL_MASK(nr)        (1ULL << ((nr) % BITS_PER_LONG_LONG))
+#endif
+#ifndef BIT_ULL_WORD
+#define BIT_ULL_WORD(nr)        ((nr) / BITS_PER_LONG_LONG)
+#endif
+#ifndef BITS_PER_BYTE
+#define BITS_PER_BYTE           (8)
+#endif
+#ifndef BITS_TO_LONGS
+#define BITS_TO_LONGS(nr)       DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+#endif
+
+#ifndef min
+#define min(x, y) ((x) < (y) ? (x) : (y))
+#endif
+#ifndef max
+#define max(x, y) ((x) > (y) ? (x) : (y))
+#endif
+
+#ifndef min_t
+#define min_t(type, x, y) ({                    \
+         type __min1 = (x);                      \
+         type __min2 = (y);                      \
+         __min1 < __min2 ? __min1 : __min2; })
+#endif
+#ifndef max_t
+#define max_t(type, x, y) ({                    \
+         type __max1 = (x);                      \
+         type __max2 = (y);                      \
+         __max1 > __max2 ? __max1 : __max2; })
+#endif
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @p(ptr):        the pointer to the member.
+ * @t(type):       the type of the container struct this is embedded in.
+ * @m(member):     the name of the member within the struct.
+ *
+ */
+#ifndef container_of
+	#define container_of(ptr, type, member) \
+        ((type *)((char *)(ptr)-(SIZE_T)(&((type *)0)->member)))
+#endif
+
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static inline int test_bit(int nr, const volatile unsigned long *addr)
+{
+        return ((1UL << (nr & 31)) & (addr[nr >> 5])) != 0;
+}
+/**
+* set_bit - Atomically set a bit in memory
+* @nr: the bit to set
+* @addr: the address to start counting from
+*
+* This function is atomic and may not be reordered.  See __set_bit()
+* if you do not require the atomic guarantees.
+*
+* Note: there are no guarantees that this function will not be reordered
+* on non x86 architectures, so if you are writing portable code,
+* make sure not to rely on its reordering guarantees.
+*
+* Note that @nr may be almost arbitrarily large; this function is not
+* restricted to acting on a single-word quantity.
+*/
+static inline void set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+	SaveAndCli();
+	*p  |= mask;
+	RestoreFlags();
+}
+
+/**
+* clear_bit - Clears a bit in memory
+* @nr: Bit to clear
+* @addr: Address to start counting from
+*
+* clear_bit() is atomic and may not be reordered.  However, it does
+* not contain a memory barrier, so if it is used for locking purposes,
+* you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+* in order to ensure changes are visible on other processors.
+*/
+static inline void clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+	SaveAndCli();
+	*p &= ~mask;
+	RestoreFlags();
+}
+
+/**
+* change_bit - Toggle a bit in memory
+* @nr: Bit to change
+* @addr: Address to start counting from
+*
+* change_bit() is atomic and may not be reordered. It may be
+* reordered on other architectures than x86.
+* Note that @nr may be almost arbitrarily large; this function is not
+* restricted to acting on a single-word quantity.
+*/
+static inline void change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+	SaveAndCli();
+	*p ^= mask;
+	RestoreFlags();
+}
+
+/**
+* test_and_set_bit - Set a bit and return its old value
+* @nr: Bit to set
+* @addr: Address to count from
+*
+* This operation is atomic and cannot be reordered.
+* It may be reordered on other architectures than x86.
+* It also implies a memory barrier.
+*/
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	
+	SaveAndCli();
+	old = *p;
+	*p = old | mask;
+	RestoreFlags();
+	return (old & mask) != 0;
+}
+
+/**
+* test_and_clear_bit - Clear a bit and return its old value
+* @nr: Bit to clear
+* @addr: Address to count from
+*
+* This operation is atomic and cannot be reordered.
+* It can be reorderdered on other architectures other than x86.
+* It also implies a memory barrier.
+*/
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	
+	SaveAndCli();
+	old = *p;
+	*p = old & ~mask;
+	RestoreFlags();
+
+	return (old & mask) != 0;
+}
+/**
+* test_and_change_bit - Change a bit and return its old value
+* @nr: Bit to change
+* @addr: Address to count from
+*
+* This operation is atomic and cannot be reordered.
+* It also implies a memory barrier.
+*/
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	
+	SaveAndCli();
+	old = *p;
+	*p = old ^ mask;
+	RestoreFlags();
+
+	return (old & mask) != 0;
+}
+
+#ifndef ARRAY_SIZE
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+#endif
+
+#endif /* US_OS_WRAP_VIA_OSDEP_API_H_ */

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/us_scsi.h

@@ -0,0 +1,19 @@
+#ifndef _US_SCSI_H
+#define _US_SCSI_H
+
+/**
+ * define transfer length
+ */
+#define TRANS_LEN_READ_10			512
+#define TRANS_LEN_WRITE_10			512
+#define TRANS_LEN_INQUIRY			36
+#define TRANS_LEN_TEST_UNIT_READY	0
+#define TRANS_LEN_READ_CAPACITY_10	8
+#define TRANS_LEN_READ_CAPACITY_16	12
+#define TRANS_LEN_REQUEST_SENSE		18
+#define TRANS_LEN_MODE_SENSE		192
+
+extern int scsi_cmnd_execute(char cmnd, unsigned char * _buff,
+						unsigned long _sector, unsigned int _count);
+
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/us_strings.h

@@ -0,0 +1,28 @@
+#ifndef _US_STRINGS_H
+#define _US_STRINGS_H
+/* description of the sense key values */
+static const char * const snstext[] = {
+	"No Sense",	    /* 0: There is no sense information */
+	"Recovered Error",  /* 1: The last command completed successfully
+				  but used error correction */
+	"Not Ready",	    /* 2: The addressed target is not ready */
+	"Medium Error",	    /* 3: Data error detected on the medium */
+	"Hardware Error",   /* 4: Controller or device failure */
+	"Illegal Request",  /* 5: Error in request */
+	"Unit Attention",   /* 6: Removable medium was changed, or
+				  the target has been reset, or ... */
+	"Data Protect",	    /* 7: Access to the data is blocked */
+	"Blank Check",	    /* 8: Reached unexpected written or unwritten
+				  region of the medium */
+	"Vendor Specific(9)",
+	"Copy Aborted",	    /* A: COPY or COMPARE was aborted */
+	"Aborted Command",  /* B: The target aborted the command */
+	"Equal",	    /* C: A SEARCH DATA command found data equal,
+				  reserved in SPC-4 rev 36 */
+	"Volume Overflow",  /* D: Medium full with still data to be written */
+	"Miscompare",	    /* E: Source data and data on the medium
+				  do not agree */
+	"Completed",	    /* F: command completed sense data reported,
+				  may occur for successful command */
+};
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/us_transport.h

@@ -0,0 +1,67 @@
+/* Driver for USB Mass Storage compliant devices
+ * Transport Functions Header File
+ */
+
+#ifndef _US_TRANSPORT_H_
+#define _US_TRANSPORT_H_
+
+/*
+ * usb_stor_bulk_transfer_xxx() return codes, in order of severity
+ */
+
+#define USB_STOR_XFER_GOOD	0	/* good transfer                 */
+#define USB_STOR_XFER_SHORT	1	/* transferred less than expected */
+#define USB_STOR_XFER_STALLED	2	/* endpoint stalled              */
+#define USB_STOR_XFER_LONG	3	/* device tried to send too much */
+#define USB_STOR_XFER_ERROR	4	/* transfer died in the middle   */
+
+/*
+ * Transport return codes
+ */
+
+#define USB_STOR_TRANSPORT_GOOD	   0   /* Transport good, command good	   */
+#define USB_STOR_TRANSPORT_FAILED  1   /* Transport good, command failed   */
+#define USB_STOR_TRANSPORT_NO_SENSE 2  /* Command failed, no auto-sense    */
+#define USB_STOR_TRANSPORT_ERROR   3   /* Transport bad (i.e. device dead) */
+
+/*
+ * We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED
+ * return codes.  But now the transport and low-level transfer routines
+ * treat an abort as just another error (-ENOENT for a cancelled URB).
+ * It is up to the invoke_transport() function to test for aborts and
+ * distinguish them from genuine communication errors.
+ */
+
+/*
+ * CBI accept device specific command
+ */
+#define US_CBI_ADSC		0
+
+//extern int usb_stor_CB_transport(struct scsi_cmnd *, struct us_data*);
+//extern int usb_stor_CB_reset(struct us_data*);
+//
+//extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data*);
+//extern int usb_stor_Bulk_max_lun(struct us_data*);
+//extern int usb_stor_Bulk_reset(struct us_data*);
+//
+//extern void usb_stor_invoke_transport(struct scsi_cmnd *, struct us_data*);
+//extern void usb_stor_stop_transport(struct us_data*);
+
+//extern int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
+//		u8 request, u8 requesttype, u16 value, u16 index,
+//		void *data, u16 size, int timeout);
+//extern int usb_stor_clear_halt(struct us_data *us, unsigned int pipe);
+//
+//extern int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe,
+//		u8 request, u8 requesttype, u16 value, u16 index,
+//		void *data, u16 size);
+//extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe,
+//		void *buf, unsigned int length, unsigned int *act_len);
+//extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe,
+//		void *buf, unsigned int length, int use_sg, int *residual);
+//extern int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
+//		struct scsi_cmnd* srb);
+//
+//extern int usb_stor_port_reset(struct us_data *us);
+#endif
+

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/us_usb.h

@@ -0,0 +1,245 @@
+#ifndef _US_USB_H_
+#define _US_USB_H_
+
+#include "usb.h"
+#include "us_os_wrap_via_osdep_api.h"
+#include "us_debug.h"
+//#include "sg.h"
+
+struct us_data;
+struct scsi_cmnd;
+
+#define CONFIG_SG	0
+#define CONFIG_DMA	0
+
+/*
+ * Unusual device list definitions 
+ */
+
+struct us_unusual_dev {
+	const char* vendorName;
+	const char* productName;
+	__u8  useProtocol;
+	__u8  useTransport;
+	int (*initFunction)(struct us_data *);
+};
+
+/* Flag definitions: these entries are static */
+#define US_FL_SINGLE_LUN      0x00000001 /* allow access to only LUN 0	    */
+//#define US_FL_MODE_XLATE      0          /* [no longer used]                */
+#define US_FL_NEED_OVERRIDE   0x00000004 /* unusual_devs entry is necessary */
+//#define US_FL_IGNORE_SER      0		 /* [no longer used]		    */
+#define US_FL_SCM_MULT_TARG   0x00000020 /* supports multiple targets	    */
+#define US_FL_FIX_INQUIRY     0x00000040 /* INQUIRY response needs faking   */
+#define US_FL_FIX_CAPACITY    0x00000080 /* READ CAPACITY response too big  */
+#define US_FL_IGNORE_RESIDUE  0x00000100 /* reported residue is wrong	    */
+#define US_FL_BULK32          0x00000200 /* Uses 32-byte CBW length         */
+
+
+/* Dynamic bitflag definitions (us->dflags): used in set_bit() etc. */
+#define US_FLIDX_URB_ACTIVE	0	/* current_urb is in use    */
+#define US_FLIDX_SG_ACTIVE	1	/* current_sg is in use     */
+#define US_FLIDX_ABORTING	2	/* abort is in progress     */
+#define US_FLIDX_DISCONNECTING	3	/* disconnect in progress   */
+#define US_FLIDX_RESETTING	4	/* device reset in progress */
+#define US_FLIDX_TIMED_OUT	5	/* SCSI midlayer timed out  */
+#define US_FLIDX_SCAN_PENDING	6	/* scanning not yet done    */
+#define US_FLIDX_REDO_READ10	7	/* redo READ(10) command    */
+#define US_FLIDX_READ10_WORKED	8	/* previous READ(10) succeeded */
+
+#define USB_STOR_STRING_LEN 32
+
+/*
+ * We provide a DMA-mapped I/O buffer for use with small USB transfers.
+ * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a
+ * 31-byte buffer.  But Freecom needs a 64-byte buffer, so that's the
+ * size we'll allocate.
+ */
+
+#define US_IOBUF_SIZE		64	/* Size of the DMA-mapped I/O buffer */
+#define US_SENSE_SIZE		18	/* Size of the autosense data buffer */
+
+typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*);
+typedef int (*trans_reset)(struct us_data*);
+typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*);
+typedef void (*extra_data_destructor)(void *);	/* extra data destructor */
+typedef void (*pm_hook)(struct us_data *, int);	/* power management hook */
+
+#define US_SUSPEND	0
+#define US_RESUME	1
+
+/* we allocate one of these for every device that we remember */
+struct us_data {
+	/* The device we're working with
+	 * It's important to note:
+	 *    (o) you must hold dev_mutex to change pusb_dev
+	 */
+	_Mutex		dev_mutex;
+	struct usb_device	*pusb_dev;	 /* this usb_device */
+	struct usb_interface	*pusb_intf;	 /* this interface */
+	struct us_unusual_dev   *unusual_dev;	 /* device-filter entry     */
+	unsigned long		fflags;		 /* fixed flags from filter */
+	unsigned long		dflags;		 /* dynamic atomic bitflags */
+	unsigned int		send_bulk_pipe;	 /* cached pipe values */
+	unsigned int		recv_bulk_pipe;
+	unsigned int		send_ctrl_pipe;
+	unsigned int		recv_ctrl_pipe;
+	unsigned int		recv_intr_pipe;
+
+	/* information about the device */
+	char			*transport_name;
+	char			*protocol_name;
+	__le32			bcs_signature;
+	u8			subclass;
+	u8			protocol;
+	u8			max_lun;  // max number of logical unit (0,1,2,3...)
+
+	u8			ifnum;		 /* interface number   */
+	u8			ep_bInterval;	 /* interrupt interval */ 
+
+	/* function pointers for this device */
+	trans_cmnd		transport;	 /* transport function	   */
+	trans_reset		transport_reset; /* transport device reset */
+	proto_cmnd		proto_handler;	 /* protocol handler	   */
+
+	/* SCSI interfaces */
+	struct scsi_cmnd	*srb;		 /* current srb		*/
+	unsigned int		tag;		 /* current dCBWTag	*/
+
+	/* control and bulk communications data */
+	struct urb		*current_urb;	 /* USB requests	 */
+	struct usb_ctrlrequest	*cr;		 /* control requests	 */
+//	struct usb_sg_request	current_sg;	 /* scatter-gather req.  */
+	unsigned char		*iobuf;		 /* I/O buffer		 */
+	dma_addr_t		iobuf_dma;	 /* buffer DMA addresses */
+
+	xTaskHandle ctl_task; /*the control task handle*/
+
+	/* mutual exclusion and synchronization structures */
+	_Sema cmnd_ready;	 /* to sleep thread on	    */
+	_Mutex	notify;		 /* thread begin/end	    */
+
+	unsigned no_sg_constraint:1;	/* no sg constraint */
+	unsigned sg_tablesize;		/* 0 or largest number of sg list entries */
+
+	/* subdriver information */
+	void			*extra;		 /* Any extra data          */
+};
+
+/* Convert between us_data and the corresponding Scsi_Host */
+//static inline struct Scsi_Host *us_to_host(struct us_data *us) {
+//	return container_of((void *) us, struct Scsi_Host, hostdata);
+//}
+//static inline struct us_data *host_to_us(struct Scsi_Host *host) {
+//	return (struct us_data *) host->hostdata;
+//}
+
+/* Function to fill an inquiry response. See usb.c for details */
+extern void fill_inquiry_response(struct us_data *us,
+	unsigned char *data, unsigned int data_len);
+
+/* The scsi_lock() and scsi_unlock() macros protect the sm_state and the
+ * single queue element srb for write access */
+//#define scsi_unlock(host)	spin_unlock_irq(host->host_lock)
+//#define scsi_lock(host)		spin_lock_irq(host->host_lock)
+
+#define scsi_unlock(host)	spin_unlock(host->host_lock)
+#define scsi_lock(host)		spin_lock(host->host_lock)
+
+/* General routines provided by the usb-storage standard core */
+#ifdef CONFIG_PM
+extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message);
+extern int usb_stor_resume(struct usb_interface *iface);
+extern int usb_stor_reset_resume(struct usb_interface *iface);
+#else
+#define usb_stor_suspend	NULL
+#define usb_stor_resume		NULL
+#define usb_stor_reset_resume	NULL
+#endif
+
+extern int usb_stor_pre_reset(struct usb_interface *iface);
+extern int usb_stor_post_reset(struct usb_interface *iface);
+
+extern int usb_stor_probe1(struct us_data *us,
+		struct usb_interface *intf,
+		const struct usb_device_id *id,
+		struct us_unusual_dev *unusual_dev);
+extern int usb_stor_probe2(struct us_data *us);
+extern void usb_stor_disconnect(struct usb_interface *intf);
+
+extern void usb_stor_adjust_quirks(struct usb_device *dev,
+		unsigned long *fflags);
+
+// the follow definition should be prot to usb.h for other usb device
+
+
+/* USB autosuspend and autoresume */
+
+#ifdef CONFIG_PM_RUNTIME
+extern void usb_enable_autosuspend(struct usb_device *udev);
+extern void usb_disable_autosuspend(struct usb_device *udev);
+
+extern int usb_autopm_get_interface(struct usb_interface *intf);
+extern void usb_autopm_put_interface(struct usb_interface *intf);
+extern int usb_autopm_get_interface_async(struct usb_interface *intf);
+extern void usb_autopm_put_interface_async(struct usb_interface *intf);
+extern void usb_autopm_get_interface_no_resume(struct usb_interface *intf);
+extern void usb_autopm_put_interface_no_suspend(struct usb_interface *intf);
+
+static inline void usb_mark_last_busy(struct usb_device *udev)
+{
+	pm_runtime_mark_last_busy(&udev->dev);
+}
+
+#else
+
+static inline int usb_enable_autosuspend(struct usb_device *udev)
+{ return 0; }
+static inline int usb_disable_autosuspend(struct usb_device *udev)
+{ return 0; }
+
+static inline int usb_autopm_get_interface(struct usb_interface *intf)
+{ return 0; }
+static inline int usb_autopm_get_interface_async(struct usb_interface *intf)
+{ return 0; }
+
+static inline void usb_autopm_put_interface(struct usb_interface *intf)
+{ }
+static inline void usb_autopm_put_interface_async(struct usb_interface *intf)
+{ }
+static inline void usb_autopm_get_interface_no_resume(
+		struct usb_interface *intf)
+{ }
+static inline void usb_autopm_put_interface_no_suspend(
+		struct usb_interface *intf)
+{ }
+static inline void usb_mark_last_busy(struct usb_device *udev)
+{ }
+#endif
+
+/* USB port reset for device reinitialization */
+extern int usb_reset_device(struct usb_device *dev);
+extern void usb_queue_reset_device(struct usb_interface *dev);
+
+extern void *usb_alloc_coherent(struct usb_device *dev, size_t size,
+	gfp_t mem_flags, dma_addr_t *dma);
+extern void usb_free_coherent(struct usb_device *dev, size_t size,
+	void *addr, dma_addr_t dma);
+
+
+// copy from transport.h
+extern int usb_stor_CB_transport(struct scsi_cmnd *, struct us_data*);
+extern int usb_stor_CB_reset(struct us_data*);
+extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data*);
+extern int usb_stor_Bulk_max_lun(struct us_data*);
+extern int usb_stor_Bulk_reset(struct us_data*);
+
+extern void usb_stor_invoke_transport(struct scsi_cmnd *, struct us_data*);
+extern void usb_stor_stop_transport(struct us_data*);
+
+// copy form protocol.h
+extern void usb_stor_transparent_scsi_command(struct scsi_cmnd* srb, struct us_data* );
+
+extern unsigned char usb_stor_sense_invalidCDB[18];
+
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/host/storage/inc/us_usual.h

@@ -0,0 +1,37 @@
+#ifndef __US_USUAL_H
+#define __US_USUAL_H
+
+#include "usb.h"
+#include "storage.h"
+
+#define US_FL_SINGLE_LUN			0x00000001/* allow access to only LUN 0 */
+//#define US_FL_NEED_OVERRIDE		0x00000002/* unusual_devs entry is necessary */
+//#define US_FL_SCM_MULT_TARG		0x00000004/* supports multiple targets */
+//#define US_FL_FIX_INQUIRY			0x00000008/* INQUIRY response needs faking */
+//#define US_FL_FIX_CAPACITY			0x00000010/* READ CAPACITY response too big */
+//#define US_FL_IGNORE_RESIDUE		0x00000020/* reported residue is wrong */
+//#define US_FL_BULK32				0x00000040/* Uses 32-byte CBW length */
+#define US_FL_NOT_LOCKABLE			0x00000080/* PREVENT/ALLOW not supported */
+#define US_FL_GO_SLOW				0x00000100/* Need delay after Command phase */
+#define US_FL_NO_WP_DETECT			0x00000200/* Don't check for write-protect */
+#define US_FL_MAX_SECTORS_64		0x00000400/* Sets max_sectors to 64    */
+#define US_FL_IGNORE_DEVICE			0x00000800/* Don't claim device */
+#define US_FL_CAPACITY_HEURISTICS	0x00001000/* sometimes sizes is too big */
+#define US_FL_MAX_SECTORS_MIN		0x00002000/* Sets max_sectors to arch min */
+#define US_FL_BULK_IGNORE_TAG		0x00004000/* Ignore tag mismatch in bulk operations */
+#define US_FL_SANE_SENSE		    0x00008000/* Sane Sense (> 18 bytes) */
+#define US_FL_CAPACITY_OK			0x00010000/* READ CAPACITY response is correct */
+#define US_FL_BAD_SENSE				0x00020000/* Bad Sense (never more than 18 bytes) */
+#define US_FL_NO_READ_DISC_INFO 	0x00040000/* cannot handle READ_DISC_INFO */
+#define US_FL_NO_READ_CAPACITY_16	0x00080000/* cannot handle READ_CAPACITY_16*/
+#define US_FL_INITIAL_READ10		0x00100000/* Initial READ(10) (and others) must be retried */
+#define US_FL_WRITE_CACHE			0x00200000/* Write Cache status is not available */
+#define US_FL_NEEDS_CAP16			0x00400000/* cannot handle READ_CAPACITY_10 */
+#define US_FL_IGNORE_UAS			0x00800000/* Device advertises UAS but it is broken */
+#define US_FL_BROKEN_FUA			0x01000000/* Cannot handle FUA in WRITE or READ CDBs */
+
+extern int usb_usual_ignore_device(struct usb_interface *intf);
+extern struct usb_device_id usb_storage_usb_ids[];
+
+#endif /* __US_USUAL_H */
+

RTL00_SDKV35a/component/common/drivers/usb_class/host/uvc/inc/mjpeg/mjpeg_api.h

@@ -0,0 +1,41 @@
+#ifndef _MJPEG_API_H
+#define _MJPEG_API_H
+
+
+/* memory disk type */
+typedef enum _medium_type{
+	medium_SD,
+	medium_USB,
+	medium_FLASH,
+	medium_CACHE
+}medium_type;
+
+/* time unit*/
+typedef enum _time_unit{
+	unit_HR,  // hour
+	unit_MIN, // minute
+	unit_SEC, //second
+}time_unit;
+
+typedef struct _mjpeg_cache{
+	unsigned char* addr;
+	int size;
+}mjpeg_cache;
+
+struct mjpeg_context{
+	/* mjpeg size*/
+	int width;//frame width
+    int height;//frame height
+	/* */
+	medium_type disktype;
+	time_unit timeunit;
+	int interval;
+	unsigned char* name;
+	unsigned char is_periodic;
+	/* store mjpeg in a RAM cache */
+	mjpeg_cache cache;
+};
+
+int mjpeg_get(struct mjpeg_context *context);
+
+#endif

RTL00_SDKV35a/component/common/drivers/usb_class/host/uvc/inc/uvc_intf.h

@@ -38,6 +38,7 @@ int uvc_stream_init(void); //entry function to start uvc
 void uvc_stream_free(void); // free streaming resources
 int uvc_is_stream_ready(void); // return true if uvc device is initialized successfully
 int uvc_is_stream_on(void); //return true if uvc device is streaming now
+int uvc_is_stream_off(void); //return true if uvc device is free already
 int uvc_stream_on(void); //enable camera streaming
 void uvc_stream_off(void); //disable camera streaming
 int uvc_set_param(uvc_fmt_t fmt_type, int *width, int *height, int *frame_rate, int *compression_ratio);//set camera streaming video parameters:video format, resolution and frame rate.

RTL00_SDKV35a/component/common/drivers/usb_class/host/uvc/inc/uvc_os_wrap_via_osdep_api.h

@@ -335,10 +335,10 @@ static inline __u16 le16_to_cpup(const __le16 *p)
 #endif
 
 #ifndef copy_from_user
-#define copy_from_user(to, from, sz) RtlMemcpy((to), (from), (sz))
+#define copy_from_user(to, from, sz) _memcpy((to), (from), (sz))
 #endif
 #ifndef copy_to_user
-#define copy_to_user(to, from, sz)   RtlMemcpy((to), (from), (sz))
+#define copy_to_user(to, from, sz)   _memcpy((to), (from), (sz))
 #endif
 
 typedef u32             compat_caddr_t; //used for compatibility in uvc_v4l2.c
@@ -354,6 +354,7 @@ typedef u32             compat_caddr_t; //used for compatibility in uvc_v4l2.c
 * of course, the buffer size is zero). It does not pad
 * out the result like strncpy() does.
 */
+#ifndef __GNUC__
 static inline size_t strlcpy(char *dest, const char *src, size_t size)
 {
          size_t ret = _strlen(src);
@@ -365,6 +366,7 @@ static inline size_t strlcpy(char *dest, const char *src, size_t size)
          }
          return ret;
 }
+#endif
 
 /**
 * clamp - return a value clamped to a given range with strict typechecking
@@ -505,6 +507,7 @@ static inline size_t memweight(const void *ptr, size_t bytes)
 * @src: The string to append to it
 * @count: The size of the destination buffer.
 */
+#ifndef __GNUC__
 static inline size_t strlcat(char *dest, const char *src, size_t count)
 {
          size_t dsize = _strlen(dest);
@@ -522,7 +525,7 @@ static inline size_t strlcat(char *dest, const char *src, size_t count)
          dest[len] = 0;
          return res;
 }
-
+#endif
 
 /**
  * atomic_dec_and_test - decrement and test

RTL00_SDKV35a/component/common/file_system/fatfs/disk_if/inc/atadrive.h

@@ -0,0 +1,7 @@
+#ifndef _ATADRIVE_H_
+#define _ATADRIVE_H_
+
+#include "fatfs_ext/inc/ff_driver.h"
+
+extern ll_diskio_drv ATA_disk_Driver;
+#endif

RTL00_SDKV35a/component/common/mbed/targets/cmsis/rtl8195a

@@ -0,0 +1,14 @@
+/* mbed Microcontroller Library - CMSIS
+ * Copyright (C) 2009-2011 ARM Limited. All rights reserved.
+ * 
+ * A generic CMSIS include header, pulling in RTL8195A specifics
+ */
+
+#ifndef MBED_CMSIS_H
+#define MBED_CMSIS_H
+
+#include <platform/platform_stdlib.h>
+#include <hal_platform.h>
+
+#endif
+

RTL00_SDKV35a/component/common/media/codec/aac/aac.h

@@ -0,0 +1,42 @@
+#ifndef _AAC_H
+#define _AAC_H
+  
+#include "dlist.h"      //list management
+#include "basic_types.h"
+#include "osdep_service.h"
+//#include "osdep_api.h"
+
+#define AAC_DEBUG 1
+
+#if AAC_DEBUG
+#define AAC_PRINTF(fmt, args...)    printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#define AAC_ERROR(fmt, args...)     printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#else
+#define AAC_PRINTF(fmt, args...)    
+#define AAC_ERROR(fmt, args...)   
+#endif
+
+struct rtp_au_hdr
+{
+        u32 au_size; //contain AU size in octets(header length included)
+#if 0
+        u16 au_index;
+        u16 au_index_delta;
+        u16 cts_flag;
+        u16 cts_delta;
+        u16 dts_flag;
+        u16 dts_delta;
+        u16 rap_flag;
+        u16 stream_state;
+#endif
+        u32 au_header_len; //record AU header size in octets        
+};
+
+struct rtp_aac_obj 
+{
+        u16 au_headers_len; //contain AU header size in octet (we will translate it into bit-wise count before sending)
+        u8 au_header_num; //contain AU header number
+//        struct rtp_au_hdr *au_hdr;
+};
+
+#endif /*_AAC_H*/

RTL00_SDKV35a/component/common/media/codec/avcodec.h

@@ -0,0 +1,139 @@
+#ifndef _AV_CODEC_H_
+#define _AV_CODEC_H_
+
+/* Is this the place to include different codec header for rtp usage?*/
+
+
+struct codec_info
+{
+       int codec_id;
+       const char codec_name[8];
+       u8 pt;
+       u32 clock_rate;
+       u8 audio_channels;
+       void *priv;
+};
+
+/* media type list -- range from 0-255 stored in 1 BYTE*/
+#define AVMEDIA_TYPE_VIDEO 0
+#define AVMEDIA_TYPE_AUDIO 1
+#define AVMEDIA_TYPE_SUBTITLE  2
+#define AVMEDIA_TYPE_UNKNOWN 255
+
+/*codec id list -- id must match its placing order (starting from 0) in av_codec_tables*/
+
+#define AV_CODEC_ID_MJPEG 0
+#define AV_CODEC_ID_H264  1
+#define AV_CODEC_ID_PCMU  2
+#define AV_CODEC_ID_PCMA  3
+#define AV_CODEC_ID_MP4A_LATM 4
+#define AV_CODEC_ID_MP4V_ES 5
+#define AV_CODEC_ID_UNKNOWN -1
+
+/*rtp payload type mapping and standard rtp payload type table -- range from 0-255 in 1 BYTE*/
+#define RTP_PT_PCMU     0
+#define RTP_PT_GSM      3
+#define RTP_PT_G723     4
+#define RTP_PT_DVI4_R8000        5
+#define RTP_PT_DVI4_R16000       6
+#define RTP_PT_LPC      7
+#define RTP_PT_PCMA     8
+#define RTP_PT_G722     9
+#define RTP_PT_L16_C2   10
+#define RTP_PT_L16_C1   11
+#define RTP_PT_QCELP    12
+#define RTP_PT_CN       13
+#define RTP_PT_MPA      14
+#define RTP_PT_G728     15
+#define RTP_PT_DVI4_R11025      16
+#define RTP_PT_DVI4_R22050      17
+#define RTP_PT_G719     18
+#define RTP_PT_CELB     25
+#define RTP_PT_JPEG     26
+#define RTP_PT_NV       28
+#define RTP_PT_H261     31
+#define RTP_PT_MPV      32
+#define RTP_PT_MP2T     33
+#define RTP_PT_H263     34
+#define RTP_PT_RTCP_BASE        72
+#define RTP_PT_DYN_BASE         96
+#define RTP_PT_UNKNOWN          255
+/* AAC PROFILE */
+#define AV_PROFILE_AAC_MAIN 0
+#define AV_PROFILE_AAC_LOW  1
+#define AV_PROFILE_AAC_SSR  2
+#define AV_PROFILE_AAC_LTP  3
+#define AV_PROFILE_AAC_HE   4
+#define AV_PROFILE_AAC_HE_V2 28
+#define AV_PROFILE_AAC_LD   22
+#define AV_PROFILE_AAC_ELD  38
+#define AV_PROFILE_MPEG2_AAC_LOW 128
+#define AV_PROFILE_MPEG2_AAC_HE  131
+
+#if 0
+/* MPEG4 VIDEO PROFILE */
+#define AV_PROFILE_MPEG4_SIMPLE                     0
+#define AV_PROFILE_MPEG4_SIMPLE_SCALABLE            1
+#define AV_PROFILE_MPEG4_CORE                       2
+#define AV_PROFILE_MPEG4_MAIN                       3
+#define AV_PROFILE_MPEG4_N_BIT                      4
+#define AV_PROFILE_MPEG4_SCALABLE_TEXTURE           5
+#define AV_PROFILE_MPEG4_SIMPLE_FACE_ANIMATION      6
+#define AV_PROFILE_MPEG4_BASIC_ANIMATED_TEXTURE     7
+#define AV_PROFILE_MPEG4_HYBRID                     8
+#define AV_PROFILE_MPEG4_ADVANCED_REAL_TIME         9
+#define AV_PROFILE_MPEG4_CORE_SCALABLE             10
+#define AV_PROFILE_MPEG4_ADVANCED_CODING           11
+#define AV_PROFILE_MPEG4_ADVANCED_CORE             12
+#define AV_PROFILE_MPEG4_ADVANCED_SCALABLE_TEXTURE 13
+#define AV_PROFILE_MPEG4_SIMPLE_STUDIO             14
+#define AV_PROFILE_MPEG4_ADVANCED_SIMPLE           15
+/* DTS */
+#define AV_PROFILE_DTS         20
+#define AV_PROFILE_DTS_ES      30
+#define AV_PROFILE_DTS_96_24   40
+#define AV_PROFILE_DTS_HD_HRA  50
+#define AV_PROFILE_DTS_HD_MA   60
+#define AV_PROFILE_DTS_EXPRESS 70
+/* MPEG2 */
+#define AV_PROFILE_MPEG2_422    0
+#define AV_PROFILE_MPEG2_HIGH   1
+#define AV_PROFILE_MPEG2_SS     2
+#define AV_PROFILE_MPEG2_SNR_SCALABLE  3
+#define AV_PROFILE_MPEG2_MAIN   4
+#define AV_PROFILE_MPEG2_SIMPLE 5
+/* H264 */
+#define AV_PROFILE_H264_CONSTRAINED  (1<<9)  // 8+1; constraint_set1_flag
+#define AV_PROFILE_H264_INTRA        (1<<11) // 8+3; constraint_set3_flag
+ 
+#define AV_PROFILE_H264_BASELINE             66
+#define AV_PROFILE_H264_CONSTRAINED_BASELINE (66|FF_PROFILE_H264_CONSTRAINED)
+#define AV_PROFILE_H264_MAIN                 77
+#define AV_PROFILE_H264_EXTENDED             88
+#define AV_PROFILE_H264_HIGH                 100
+#define AV_PROFILE_H264_HIGH_10              110
+#define AV_PROFILE_H264_HIGH_10_INTRA        (110|FF_PROFILE_H264_INTRA)
+#define AV_PROFILE_H264_HIGH_422             122
+#define AV_PROFILE_H264_HIGH_422_INTRA       (122|FF_PROFILE_H264_INTRA)
+#define AV_PROFILE_H264_HIGH_444             144
+#define AV_PROFILE_H264_HIGH_444_PREDICTIVE  244
+#define AV_PROFILE_H264_HIGH_444_INTRA       (244|FF_PROFILE_H264_INTRA)
+#define AV_PROFILE_H264_CAVLC_444            44
+#endif
+
+/*av codec tables*/
+//#include "section_config.h"
+//SDRAM_DATA_SECTION
+static const struct codec_info av_codec_tables[] = {
+  {AV_CODEC_ID_MJPEG, "MJPEG", RTP_PT_JPEG, 90000, 0, 0},
+  {AV_CODEC_ID_H264, "H264", RTP_PT_DYN_BASE, 90000, 0, 0},
+  {AV_CODEC_ID_PCMU, "PCMU", RTP_PT_PCMU, 8000, 1, 0},
+  {AV_CODEC_ID_PCMA, "PCMA", RTP_PT_PCMA, 8000, 1, 0},
+  {AV_CODEC_ID_MP4A_LATM, "MP4A", RTP_PT_DYN_BASE, 16000, 2, 0},
+  {AV_CODEC_ID_MP4V_ES, "MP4V", RTP_PT_DYN_BASE, 90000, 0, 0},
+};
+#define AVCODEC_SIZE  6
+
+void get_codec_by_id(struct codec_info *c, int id);
+
+#endif  //_AV_CODEC_H_

RTL00_SDKV35a/component/common/media/codec/g711/g711.h

@@ -0,0 +1,27 @@
+
+#ifndef _G711_H
+#define _G711_H
+  
+#include "dlist.h"      //list management
+#include "basic_types.h"
+#include "osdep_service.h"
+//#include "osdep_api.h"
+
+#define G711_DEBUG 1
+
+#if G711_DEBUG
+#define G711_PRINTF(fmt, args...)    printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#define G711_ERROR(fmt, args...)     printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#else
+#define G711_PRINTF(fmt, args...)    
+#define G711_ERROR(fmt, args...)   
+#endif
+
+
+//struct rtp_g711_obj {
+//};
+
+
+/*for debug purpose*/
+
+#endif /*_G711_H*/

RTL00_SDKV35a/component/common/media/codec/h264/h264.h

@@ -0,0 +1,75 @@
+#ifndef _H264_H
+#define _H264_H
+
+#include "dlist.h"      //list management
+#include "basic_types.h"
+#include "osdep_service.h"
+//#include "osdep_api.h"
+
+#define H264_DEBUG 0
+
+#if H264_DEBUG
+#define H264_PRINTF(fmt, args...)    printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#define H264_ERROR(fmt, args...)     printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#else
+#define H264_PRINTF(fmt, args...)    
+#define H264_ERROR(fmt, args...)     
+#endif
+
+#define MAX_NUM_NAL_PER_FRM     4
+
+struct rtp_nal_obj
+{
+        u8 start_code_len;
+        unsigned char nal_header;
+        u8 is_fu_start;
+        u8 is_fu_end;
+        u8 must_not_drop;
+        u8 do_not_send;
+        int offset;
+};
+
+struct rtp_h264_obj
+{
+        int num_nal;
+        struct rtp_nal_obj nal_obj[MAX_NUM_NAL_PER_FRM];
+};
+
+#endif /*_H264_H*/
+
+#if 0
+
+#ifndef _H264_H
+#define _H264_H
+
+#include "dlist.h"      //list management
+#include "basic_types.h"
+#include "osdep_service.h"
+//#include "osdep_api.h"
+
+#define H264_DEBUG 0
+
+#if H264_DEBUG
+#define H264_PRINTF(fmt, args...)    printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#define H264_ERROR(fmt, args...)     printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#else
+#define H264_PRINTF(fmt, args...)    
+#define H264_ERROR(fmt, args...)     
+#endif
+
+/* in favor of rtp fragmentation */
+struct rtp_h264_obj
+{
+        u8 start_code_len;
+        unsigned char nal_header;
+        u8 is_fu_start;
+        u8 is_fu_end;
+        u8 must_not_drop;
+};
+
+
+/********************************h264 over rtp******************************/
+
+
+#endif /*_H264_H*/
+#endif

RTL00_SDKV35a/component/common/media/codec/mjpeg/mjpeg.h

@@ -0,0 +1,62 @@
+
+#ifndef _MJPEG_H
+#define _MJPEG_H
+  
+#include "dlist.h"      //list management
+#include "basic_types.h"
+#include "osdep_service.h"
+//#include "osdep_api.h"
+
+#define MJPEG_DEBUG 0
+
+#if MJPEG_DEBUG
+#define MJPEG_PRINTF(fmt, args...)    printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#define MJPEG_ERROR(fmt, args...)     printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#else
+#define MJPEG_PRINTF(fmt, args...)    
+#define MJPEG_ERROR(fmt, args...)     
+#endif
+
+struct jpeghdr {
+        unsigned int tspec:8;   /* type-specific field */
+        unsigned int off:24;    /* fragment byte offset */
+        u8 type;            /* id of jpeg decoder params */
+        u8 q;               /* quantization factor (or table id) */
+        u8 width;           /* frame width in 8 pixel blocks */
+        u8 height;          /* frame height in 8 pixel blocks */
+};
+
+struct jpeghdr_rst {
+        u16 dri;                /*restart interval*/
+        unsigned int f:1;       /*restart first bit flag*/
+        unsigned int l:1;       /*restart last bit flag*/
+        unsigned int count:14;  /*restart count*/
+};
+
+
+struct jpeghdr_qtable {
+        u8  mbz;
+        u8  precision;
+        u16 length;
+};
+
+#define RTP_JPEG_RESTART        0x40
+#define USE_EXPLICIT_DQT        128
+#define USE_IMPLICIT_DQT        0
+
+struct rtp_jpeg_obj
+{
+        struct jpeghdr jpghdr;
+        struct jpeghdr_rst rsthdr;
+        struct jpeghdr_qtable qtable;
+        u8     lqt[64*2];          /* Luma Quantizer table               */
+        u8     cqt[64*2];          /* Croma Quantizer table              */
+        int hdr_len;
+        int frame_offset;
+};
+
+/*for debug purpose*/
+void dumpJpegHeader(struct jpeghdr *jpghdr);
+void dumpRstDeader(struct jpeghdr_rst *rsthdr);
+
+#endif /*_MJPEG_H*/

RTL00_SDKV35a/component/common/media/framework/mmf_common.h

@@ -0,0 +1,89 @@
+#ifndef _EXCHBUF_H
+#define _EXCHBUF_H
+#include "cmsis_os.h"
+#include "errno.h"
+
+/*service task state*/
+#define S_STOP 					0x00
+#define S_RUN					0x01
+#define S_FROZEN                                0X02
+
+#define CMD_SET_HEIGHT			0x00
+#define CMD_SET_WIDTH			0x01
+#define CMD_SET_BITRATE			0x02
+#define CMD_SET_FRAMERATE		0x03
+#define CMD_SET_CPZRATIO		0x04
+#define CMD_SET_FRAMETYPE		0x05
+#define CMD_SET_SAMPLERATE		0x06
+#define CMD_SET_CHANNEL			0x07
+#define CMD_SET_CODEC			0x08
+#define CMD_SET_STREAMNUM		0x09
+#define CMD_SET_SPS				0x0a
+#define CMD_SET_PPS				0x0b
+#define CMD_SET_LEVEL			0x0c
+#define CMD_SET_APPLY			0x1f
+#define CMD_SET_STREAMMING		0x20
+#define CMD_SET_INPUT_QUEUE 	0x21
+#define CMD_SET_OUTPUT_QUEUE 	0x22
+#define CMD_SET_PRIV_BUF                0x23
+#define CMD_SET_TASK_ON                 0x24
+#define CMD_SET_TASK_FROZEN             0x25
+#define CMD_SET_TASK_OFF                0x26
+#define CMD_SELECT_CHANNEL		0x30
+#define CMD_SET_CB_START		0x40
+#define CMD_SET_CB_STOP			0x41
+#define CMD_SET_CB_PAUSE		0x42
+#define CMD_SET_CB_CUSTOMCMD	0x43
+#define CMD_FLUSH				0x50
+#define CMD_SET_FLAG                    0X51
+#define CMD_GET_STREAM_READY            0x52
+#define CMD_GET_STREAM_STATUS           0x53
+
+/*mp4 storage*/
+#define CMD_SET_ST_PERIOD               0X60
+#define CMD_SET_ST_TOTAL                0X61
+#define CMD_SET_ST_TYPE                 0X62
+#define CMD_SET_ST_FILENAME             0x63
+#define CMD_SET_ST_START                0x64
+/*mp4 storage*/
+#define STORAGE_ALL     0
+#define STORAGE_VIDEO   1
+#define STORAGE_AUDIO   2
+
+/*exchange buffer state*/
+#define STAT_INIT		0
+#define STAT_USED		1
+#define STAT_READY		2
+#define STAT_RESERVED           3
+
+#define TIME_SYNC_EN            0
+#define TIME_SYNC_DIS           1
+
+#define FMT_V_MJPG			0x00
+#define FMT_V_H264			0x01
+#define FMT_V_MP4V_ES		0x02
+#define FMT_A_PCMU			0x10
+#define FMT_A_PCMA			0x11
+#define FMT_A_MP4A_LATM		0x12
+#define FMT_AV_UNKNOWN		0xFF
+
+#define MFT_CMD	0
+#define MFT_DATA 1
+typedef struct _exch_buf{
+	//_list 		node;		// linking node
+	uint32_t	type;			// CMD, or DATA
+	uint32_t	cmd;			// command 
+	uint32_t	arg;			// command arg
+	
+	uint8_t* 	data;			//
+	uint32_t	index;
+	uint32_t	len;
+	uint32_t 	timestamp;		// 0: not set
+	uint32_t	codec_fmt;		// FMT_V_xx or FMT_A_xx
+	
+	uint32_t	state;		
+	void* 		priv;			// private use
+}exch_buf_t;
+
+typedef int (*mmf_cb_t)(void*);
+#endif

RTL00_SDKV35a/component/common/media/framework/mmf_sink.h

@@ -0,0 +1,30 @@
+#ifndef _STREAM_H
+#define _STREAM_H
+#include "cmsis_os.h"
+#include "mmf_common.h"
+
+typedef struct _media_sink_module{
+	void* (*create)(void);
+	void  (*destroy)(void*);
+	int   (*set_param)(void*, int, int);
+	int   (*handle)(void*, void*);
+}msink_module_t;
+
+typedef struct _media_sink_context{
+	xQueueHandle input_qid;
+	xQueueHandle output_qid;
+	int state;
+	xTaskHandle	hdl_task;
+	
+	void* drv_priv;		// private data for module
+	msink_module_t *sink;
+}msink_context;
+
+void 			mmf_sink_close(msink_context* ctx);
+msink_context* 	mmf_sink_open(msink_module_t *sink);
+int 			mmf_sink_ctrl(msink_context* ctx, int cmd, int arg);
+int 			mmf_sink_put_frame(msink_context* ctx, exch_buf_t* exbuf);
+
+// must be here
+#include "mmf_sink_modules/mmf_sink_list.h"
+#endif

RTL00_SDKV35a/component/common/media/framework/mmf_sink_modules/mmf_sink_list.h

@@ -0,0 +1,10 @@
+#ifndef _STREAM_MODULES_H
+#define _STREAM_MODULES_H
+#include "../mmf_sink.h"
+
+//list all avaliable modules here
+extern msink_module_t rtsp_module;
+extern msink_module_t rtsp2_module;
+extern msink_module_t i2s_sink_module;
+extern msink_module_t mp4_module;
+#endif

RTL00_SDKV35a/component/common/media/framework/mmf_source.h

@@ -0,0 +1,32 @@
+#ifndef _MEDIA_H
+#define _MEDIA_H
+#include "cmsis_os.h"
+#include "mmf_common.h"
+
+typedef struct _media_source_module{
+	void* (*create)(void);
+	void  (*destroy)(void*);
+	int   (*set_param)(void*, int, int);
+	int   (*handle)(void*, void*);		// input output will cast to exch_buf_t
+}msrc_module_t;
+
+
+
+typedef struct _media_source_context{
+	xQueueHandle input_qid;
+	xQueueHandle output_qid;
+	int state;
+	xTaskHandle	hdl_task;
+	
+	void* drv_priv;
+	msrc_module_t* source;
+}msrc_context;
+
+void 			mmf_source_close(msrc_context* ctx);
+msrc_context* 	mmf_source_open(msrc_module_t* source);
+int 			mmf_source_ctrl(msrc_context* ctx, int cmd, int arg);
+int 			mmf_source_get_frame(msrc_context* ctx, exch_buf_t *exbuf);
+
+// must be here
+#include "mmf_source_modules/mmf_source_list.h"
+#endif

RTL00_SDKV35a/component/common/media/framework/mmf_source_modules/mmf_source_i2s_file.h

@@ -0,0 +1,35 @@
+#ifndef MMF_SOURCE_I2S_FILE_H
+#define MMF_SOURCE_I2S_FILE_H
+
+#include "mmf_source.h"
+#include "FreeRTOS.h"
+#include "task.h"
+//#include "example_rtsp_server_i2s.h"
+#include "rtsp/rtsp_api.h"
+#include "sockets.h"
+#include "lwip/netif.h"
+
+#include "i2s_api.h"
+#include "alc5651.c"        
+#include "g711_codec.h"
+#include "gpio_api.h"   // mbed
+#include "gpio_irq_api.h"
+
+#include <platform/platform_stdlib.h>
+#include "platform_opts.h"
+#include "dlist.h"
+#include "basic_types.h"
+#include "osdep_service.h"
+
+#define I2S_DMA_PAGE_SIZE	320   // 2 ~ 4096
+#define I2S_DMA_PAGE_NUM    4   // Vaild number is 2~4
+#define RECV_PAGE_NUM 	I2S_DMA_PAGE_NUM
+
+#define G711_FSIZE 			160
+#define I2S_MODE_SWITCH			PE_5 
+
+#define I2S_SCLK_PIN            PC_1
+#define I2S_WS_PIN              PC_0
+#define I2S_SD_PIN              PC_2
+
+#endif /* MMF_SOURCE_I2S_FILE_H */

RTL00_SDKV35a/component/common/media/framework/mmf_source_modules/mmf_source_list.h

@@ -0,0 +1,14 @@
+#ifndef _MEDIA_MODULES_H
+#define _MEDIA_MODULES_H
+#include "../mmf_source.h"
+
+//list all avaliable modules here
+extern msrc_module_t uvc_module;
+extern msrc_module_t geo_module;
+extern msrc_module_t mjpgf_module;
+extern msrc_module_t h264f_module;
+extern msrc_module_t aacf_module;
+extern msrc_module_t pcmuf_module;
+extern msrc_module_t i2s_module;
+extern msrc_module_t rtp_src_module;
+#endif

RTL00_SDKV35a/component/common/media/muxer/mp4_encap.h

@@ -0,0 +1,110 @@
+#ifndef _MP4_ENCAP_H_
+#define _MP4_ENCAP_H_
+
+#include "basic_types.h"
+#include "osdep_service.h"
+
+#define MAX_BOX_CHILD 8
+#define RBUF_SIZE 1024
+
+typedef struct _mp4root{
+	unsigned int video_len;
+        unsigned int audio_len;
+	unsigned int total;
+	unsigned int keyindex;
+}MP4root,*PMP4root;
+
+#define STORAGE_IDLE            0
+#define STORAGE_START           1
+#define STORAGE_WRITE_ALL       2
+#define STORAGE_WRITE_VIDEO     3
+#define STORAGE_WRITE_AUDIO     4
+#define STORAGE_STOP            5
+#define STORAGE_END             6
+
+
+#define STORAGE_ALL     0
+#define STORAGE_VIDEO   1
+#define STORAGE_AUDIO   2
+
+typedef struct _mp4_payload{
+  unsigned char *addr;
+  unsigned int  len;
+}mp4_payload,pmp4_payload;
+
+typedef struct _mp4_write_info{
+  int mp4_start_position;
+  int mp4_end_position;
+  int mp4_occupy_size;
+  int mp4_empty_size;
+  int mp4_write_start_position;
+  int mp4_write_end_position;
+  int mp4_write_occupy_size;
+  int mp4_write_empty_size;
+  int mp4_write_length;
+}mp4_winfo,*pmp4_winfo;
+
+typedef struct _mp4_context{
+    FATFS       m_fs;
+    int         drv_num;
+    char        _drv[4];
+    FIL         m_file;
+    char        filename[32];
+    int         Fatfs_ok;
+    int         filecount;
+    int         width;
+    int         height;
+    int         sample_rate;
+    int         channel_count;
+    int         frame_rate;
+    u32         start_time;//rtw_get_current_time()
+    u32         file_name_index;
+    u32         storage_state;
+    MP4root     root;
+    MP4root     root_reserve;
+    int         period_time;
+    int         file_total;
+    int         sps_start;
+    int         type;
+    int         sps_len;
+    int         pps_len;
+    int         sps_pps_mark;
+    unsigned    int *video_buffer_index;
+    unsigned    int *video_buffer_size;
+    int         video_size;
+    unsigned    int *audio_buffer_index;
+    unsigned    int *audio_buffer_size;
+    int         audio_size;
+    unsigned    char *moov_box;
+    int         moov_box_size;
+    unsigned    char *h264_buf;
+    int         H264_LENGTH;
+    mp4_payload payload;
+    mp4_payload reserved_payload;
+    int         reserved_start_index;
+    int         iframe;
+    int         reserved_type;
+    _sema       start_fatfs_write;
+    int         write_status;
+    int         audio_write_status;
+    int         video_write_status;
+    int         buffer_write_status;//0: real write 1: virtual write 
+    mp4_winfo   winfo;
+    int         nal_len;
+    int         h264_extra_len;
+    int         mp4_muxer_enable;
+}mp4_context,*pmp4_context;
+#define IDLE            0
+#define FATFS_WRITING   1
+#define FATFS_DONE      2
+
+void mp4_handle(pmp4_context mp4_ctx,unsigned char *buf,unsigned int size,int type);
+void set_mp4_audio_buffer(pmp4_context mp4_ctx,unsigned int *audio_index,unsigned int *audio_size,int size);
+void set_mp4_video_buffer(pmp4_context mp4_ctx,unsigned int *video_index,unsigned int *video_size,int size);
+void set_mp4_moov_buffer(pmp4_context mp4_ctx,unsigned char *moov,int size);
+int mp4_set_record(pmp4_context mp4_ctx,int num);
+void mp4_muxer_init(pmp4_context mp4_ctx);
+void mp4_muxer_close(pmp4_context mp4_ctx);
+int mp4_set_start_status(pmp4_context mp4_ctx);
+
+#endif

RTL00_SDKV35a/component/common/network/lwip/lwip_v1.4.1/port/realtek/freertos/ethernetif.c

@@ -71,10 +71,10 @@
 #include "freertos/inic_intf.h"
 #endif
 
-#define netifMTU                                (1500)
+#define netifMTU                            (1500)
 #define netifINTERFACE_TASK_STACK_SIZE		( 350 )
 #define netifINTERFACE_TASK_PRIORITY		( configMAX_PRIORITIES - 1 )
-#define netifGUARD_BLOCK_TIME			( 250 )
+#define netifGUARD_BLOCK_TIME				( 250 )
 /* The time to block waiting for input. */
 #define emacBLOCK_TIME_WAITING_FOR_INPUT	( ( portTickType ) 100 )
 

RTL00_SDKV35a/component/common/network/rtsp/rtp_api.h

@@ -0,0 +1,134 @@
+#ifndef _RTP_API_H_
+#define _RTP_API_H_
+
+#include "dlist.h"
+#include "basic_types.h"
+#include "osdep_service.h"
+//#include "osdep_api.h"
+#include "avcodec.h"
+#include <lwip/def.h> //for host network byte order convertion
+
+/* from error_base.h */
+#define	EIO		 5	/* I/O error */
+#define	EAGAIN		11	/* Try again */
+#define	ENOMEM		12	/* Out of memory */
+#define	EINVAL		22	/* Invalid argument */
+
+#define RTP_BIG_ENDIAN 0
+#define RTP_HDR_SZ 12
+
+#define RTP_SERVER_PORT_BASE 55608
+#define RTP_PORT_BASE 50020
+#define RTP_CLIENT_PORT_BASE 51020
+/*
+ * RTP data header from RFC1889
+ */
+/*
+ *
+ *
+ *    The RTP header has the following format:
+ *
+ *  0                   1                   2                   3
+ *  0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |V=2|P|X|  CC   |M|     PT      |       sequence number         |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |                           timestamp                           |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |           synchronization source (SSRC) identifier            |
+ * +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
+ * |            contributing source (CSRC) identifiers             |
+ * |                             ....                              |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * RTP data header
+ */
+
+typedef struct {
+#if RTP_BIG_ENDIAN
+        u16 version:2;   /* protocol version */
+        u16 p:1;         /* padding flag */
+        u16 x:1;         /* header extension flag */
+        u16 cc:4;        /* CSRC count */
+        u16 m:1;         /* marker bit */
+        u16 pt:7;        /* payload type */
+#else /*RTP_LITTLE_ENDIAN*/
+        u16 cc:4;        /* CSRC count */
+        u16 x:1;         /* header extension flag */
+        u16 p:1;         /* padding flag */
+        u16 version:2;   /* protocol version */
+        u16 pt:7;        /* payload type */
+        u16 m:1;         /* marker bit */
+#endif
+        u16 seq;              /* sequence number */
+        u32 ts;               /* timestamp */
+        u32 ssrc;             /* synchronization source */
+        u32 *csrc;          /* optional CSRC list, skip if cc is set to 0 here*/
+} rtp_hdr_t;
+
+/*sturcture to hold connect info*/
+struct connect_context
+{
+	int socket_id;	
+	u8 *server_ip;
+	u16 server_port;
+        u8 *remote_ip;
+	u16 remote_port;
+};
+
+struct rtp_statistics
+{
+        u32 rtp_tick;
+        u32 rtp_tick_inc; 
+        u32 base_timestamp;
+        /*for flow control*/
+        u32 delay_threshold; //in ms
+        u32 timer1; //time before send
+        u32 timer2; //time after sent
+        u32 delta_timer;
+        u8 do_start_check; //indicate if start check need to be done
+        u32 sent_packet;
+        u32 drop_packet;
+};
+
+enum rtp_object_state
+{
+    RTP_OBJECT_IDLE = 0,
+    RTP_OBJECT_READY,
+    RTP_OBJECT_INUSE,
+    RTP_OBJECT_USED,
+};
+
+struct stream_context;
+struct rtp_object;
+
+struct rtp_object
+{
+        struct list_head rtp_list;
+        _mutex list_lock;
+        rtp_hdr_t *rtphdr;
+        void *extra;     //pointer to type specific structure
+        int index;      //respective internal buffer index 
+        u8 *data; // respective internal buffer data addr
+        int len;        //one complete frame data length
+        u32 timestamp; //timestamp        
+        u32 fs:1; //fragment start
+        u32 fe:1; //fragment end
+        u32 fk:1;    //fragment keep indicator so that cannot avoid sending by flow control        
+        u32 fd:29; //fragment data size (max size of 2^29-1)
+        enum rtp_object_state state;    
+        struct connect_context connect_ctx;
+        int (*rtp_object_handler)(struct stream_context *stream_ctx, struct rtp_object *payload);
+};
+
+void rtp_object_init(struct rtp_object *payload);
+void rtp_object_deinit(struct rtp_object *payload);
+void rtp_object_set_fs(struct rtp_object *payload, int flag);
+void rtp_object_set_fe(struct rtp_object *payload, int flag);
+void rtp_object_set_fk(struct rtp_object *payload, int flag);
+void rtp_object_set_fd(struct rtp_object *payload, int size);
+void rtp_load_o_handler_by_codec_id(struct rtp_object *payload, int id);
+void rtp_fill_header(rtp_hdr_t *rtphdr, int version, int padding, int extension, int cc, int marker, int pt, u16 seq, u32 ts, u32 ssrc);
+int rtp_parse_header(u8 *src, rtp_hdr_t *rtphdr, int is_nbo);
+void rtp_dump_header(rtp_hdr_t *rtphdr, int is_nbo);
+#endif

RTL00_SDKV35a/component/common/network/rtsp/src2rtsp.h

@@ -0,0 +1,100 @@
+#ifndef _SRC2RTSP_H_
+#define _SRC2RTSP_H_
+
+/* Add by Ian -- This file contains parts used for rtsp to access lower layer stream src information*/
+
+#include "dlist.h"
+#include "basic_types.h"
+#include "osdep_service.h"
+//#include "osdep_api.h"
+#include "rtsp/rtp_api.h"
+#include "avcodec.h"
+
+#define SRC_FROM_UVC
+//#define SRC_FROM_UAC
+//#define SRC_FROM_SPI
+#define SRC_FROM_I2S
+#define SRC_FROM_STA
+
+#define SRC_TYPE_NUL 0
+#define SRC_TYPE_UVC 1
+#define SRC_TYPE_SPI 2
+#define SRC_TYPE_UAC 3
+#define SRC_TYPE_I2S 4
+#define SRC_TYPE_STA 7
+
+struct FormatInfo
+{
+    struct codec_info codec;
+    u8 framerate;
+    u32 bitrate;
+    u32 height;
+    u32 width;
+};
+
+struct stream_flow
+{
+        int id;
+	void *prot_hook; //transport protocol hook
+	void *src;
+	int src_type;
+	struct FormatInfo currentFormatInfo;
+	int (*src_handler) (void *src, struct rtp_object *payload);
+	struct list_head input_queue;
+	_mutex input_lock;
+	struct list_head output_queue;
+	_mutex output_lock;
+        u8 is_src2rtsp_init;
+        u8 is_src2rtsp_start;
+        _sema start_src2rtsp_sema;
+	struct stream_flow *next;
+};
+
+
+#ifdef SRC_FROM_UVC 
+#include "v4l2_intf.h"
+struct uvc_streaming;
+struct uvcManager
+{
+    struct uvc_streaming *stream;
+    streaming_state state;
+    struct FormatInfo currentFormatInfo;
+};
+#endif
+
+#ifdef SRC_FROM_SPI
+
+#endif
+
+#ifdef SRC_FROM_UAC
+
+#endif
+
+#ifdef SRC_FROM_I2S
+struct i2sManager{
+    struct FormatInfo currentFormatInfo;
+};
+
+#endif
+
+#ifdef SRC_FROM_STA
+struct rtsp_static_source_manager
+{
+    struct FormatInfo currentFormatInfo;	
+};
+#endif
+
+struct stream_flow* rtsp_stream_flow_create(void);
+void rtsp_stream_flow_free(struct stream_flow *stream);
+void rtsp_register_src_handler(struct stream_flow *stream, int (*src_handler) (void *stream_src, struct rtp_object *payload));
+int rtsp_get_src_currentFormatInfo(struct stream_flow *stream);
+int rtsp_set_src_FormatInfo(struct stream_flow *stream, int codec_id, u8 framerate, u32 height, u32 width, u32 bitrate);
+extern int rtsp_set_src_extra(struct stream_flow, void *param); 
+int rtsp_stream_flow_set(struct stream_flow *stream, void *source, int src_type);
+int rtsp_stream_flow_update(struct stream_flow *stream);
+int rtsp_stream_flow_concat(struct stream_flow *stream, struct stream_flow *stream_next);
+void rtp_object_in_src_queue(struct rtp_object *payload, struct stream_flow *stream);
+struct rtp_object *rtp_object_out_src_queue(struct stream_flow *stream);
+
+
+#endif

RTL00_SDKV35a/component/common/network/websocket/libwsclient.h

@@ -0,0 +1,120 @@
+#ifndef EASYWSCLIENT_H
+#define EASYWSCLIENT_H
+#include <platform/platform_stdlib.h>
+
+/****************Define the debug message level*********************/
+#define DEBUG_WSCLIENT    1
+
+#define WSCLIENT_LOG(level, fmt, ...) printf("\n\r[WSCLIENT %s] %s: " fmt "\n", level, __FUNCTION__, ##__VA_ARGS__)
+#if DEBUG_WSCLIENT == 2
+#define WSCLIENT_DEBUG(fmt, ...) WSCLIENT_LOG("DEBUG", fmt, ##__VA_ARGS__)
+#else
+#define WSCLIENT_DEBUG(fmt, ...)
+#endif
+#if DEBUG_WSCLIENT
+#define WSCLIENT_ERROR(fmt, ...) WSCLIENT_LOG("ERROR", fmt, ##__VA_ARGS__)
+#else
+#define WSCLIENT_ERROR(fmt, ...)
+#endif
+/*******************************************************************/
+
+/****************Define the structures used*************************/
+typedef enum{ 
+	CLOSING, 
+	CLOSED, 
+	CONNECTING, 
+	OPEN 
+} readyStateValues;
+
+struct wsheader_type{
+	unsigned header_size;
+	int fin;
+	int mask;
+	enum opcode_type {
+		CONTINUATION = 0x0,
+		TEXT_FRAME = 0x1,
+		BINARY_FRAME = 0x2,
+		CLOSE = 8,
+		PING = 9,
+		PONG = 0xa,
+	} opcode;
+	int N0;
+	uint64_t N;
+	uint8_t masking_key[4];
+};
+
+struct _wsclient_context;
+struct _ssl_context;
+
+struct ssl_fun_ops{
+	int (*memory_set_own)( void * (*malloc_func)( size_t ),void (*free_func)( void * ) );
+	int (*net_connect)( int *fd, const char *host, int port );
+	int (*ssl_init)( struct _ssl_context *ssl );
+	void (*ssl_set_endpoint)( struct _ssl_context *ssl, int endpoint );
+	void (*ssl_set_authmode)( struct _ssl_context *ssl, int authmode );
+	void (*ssl_set_rng)( struct _ssl_context *ssl,
+                  int (*f_rng)(void *, unsigned char *, size_t),
+                  void *p_rng );
+	void (*ssl_set_bio)( struct _ssl_context *ssl,
+        int (*f_recv)(void *, unsigned char *, size_t), void *p_recv,
+        int (*f_send)(void *, const unsigned char *, size_t), void *p_send );
+	int (*ssl_handshake)( struct _ssl_context *ssl );
+	void (*net_close)( int fd );
+	void (*ssl_free)( struct _ssl_context *ssl );
+	int (*ssl_read)( struct _ssl_context *ssl, unsigned char *buf, size_t len );
+	int (*ssl_write)( struct _ssl_context *ssl, const unsigned char *buf, size_t len );
+	const char *(*ssl_get_ciphersuite)( const struct _ssl_context *ssl );
+	int (*net_recv)( void *ctx, unsigned char *buf, size_t len );
+	int (*net_send)( void *ctx, const unsigned char *buf, size_t len );
+};
+
+struct ws_fun_ops{
+	int (*hostname_connect)(struct _wsclient_context *wsclient);
+	void (*client_close)(struct _wsclient_context *wsclient);
+	int (*client_send)(struct _wsclient_context *wsclient, unsigned char *data, size_t data_len);
+	int (*client_read)(struct _wsclient_context *wsclient, unsigned char *data, size_t data_len);
+	struct ssl_fun_ops ssl_fun_ops;
+};
+
+typedef struct _wsclient_context{
+	char host[128];
+	char path[128];
+	char origin[200];
+	int port;
+	uint8_t use_ssl;
+	int sockfd;
+	readyStateValues readyState;
+	int tx_len;
+	void *ssl;
+	uint8_t *txbuf;
+	uint8_t *rxbuf;
+	uint8_t *receivedData;
+	struct ws_fun_ops fun_ops;
+}wsclient_context;
+/*******************************************************************/
+
+/****************General functions used by wsclient*****************/
+void ws_get_random_bytes(void *buf, size_t len);
+void* ws_malloc(unsigned int size);
+void ws_free(void *buf);
+int ws_client_handshake(wsclient_context *wsclient);
+int ws_check_handshake(wsclient_context *wsclient);
+void ws_sendData(uint8_t type, size_t message_size, uint8_t* message, int useMask, wsclient_context *wsclient);
+/*******************************************************************/
+
+/*************Functions used by wsclient without SSL****************/
+
+int ws_hostname_connect(wsclient_context *wsclient);
+int ws_client_read(wsclient_context *wsclient, unsigned char *data, size_t data_len);
+int ws_client_send(wsclient_context *wsclient, unsigned char *data, size_t data_len);
+void ws_client_close(wsclient_context *wsclient);
+/*******************************************************************/
+
+/***************Functions used by wsclient with SSL*****************/
+int wss_hostname_connect(wsclient_context *wsclient);
+int wss_client_read(wsclient_context *wsclient, unsigned char *data, size_t data_len);
+int wss_client_send(wsclient_context *wsclient, unsigned char *data, size_t data_len);
+void wss_client_close(wsclient_context *wsclient);
+/*******************************************************************/
+
+#endif

RTL00_SDKV35a/component/common/network/websocket/wsclient_api.h

@@ -0,0 +1,108 @@
+#ifndef WSCLIENT_H
+#define WSCLIENT_H
+#include <websocket/libwsclient.h>
+
+
+/******Define the maximum bytes of data send and receive********/
+#define MAX_DATA_LEN	1500
+/****************Define if using the polarssl*******************/
+#define USING_SSL
+
+
+/******************Define the function used*********************/
+#ifdef USING_SSL
+int wss_set_fun_ops(wsclient_context *wsclient);
+#define wsclient_set_fun_ops(wsclient) wss_set_fun_ops(wsclient)
+#else
+int ws_set_fun_ops(wsclient_context *wsclient);
+#define wsclient_set_fun_ops(wsclient) ws_set_fun_ops(wsclient)
+#endif
+/***************************************************************/
+
+
+
+
+/*************************************************************************************************
+** Function Name  : create_wsclient
+** Description    : Creating the websocket client context structure
+** Input          : url:websocket server's url
+**					port:websocket server's port, if not given, default 80 for "ws", 443 for "wss"
+**					origin: the address or url of your self
+** Return         : Created: websocket client context structure
+**					Failed:  NULL
+**************************************************************************************************/
+wsclient_context *create_wsclient(char *url, int port,char *path, char* origin);
+
+/*************************************************************************************************
+** Function Name  : ws_connect_url
+** Description    : Connecting to the websocket server
+** Input          : wsclient: the websocket client context created by create_wsclientfunction
+** Return         : Connected: the socket value
+**					Failed:    -1
+**************************************************************************************************/
+int ws_connect_url(wsclient_context *wsclient);
+
+/*************************************************************************************************
+** Function Name  : ws_send
+** Description    : Create the sending string data and copy to tx_buf
+** Input          : message: the string that send to server(cannot exceeding the MAX_DATA_LEN
+**					message_len: the length of the string
+**					use_mask: 0/1; 1 means using mask for bynary
+**					wsclient: the websocket client context
+** Return         : None
+**************************************************************************************************/
+void ws_send(char* message, int message_len, int use_mask, wsclient_context *wsclient);
+
+/*************************************************************************************************
+** Function Name  : ws_sendBinary
+** Description    : Create the sending binary data and copy to tx_buf
+** Input          : message: the binary that send to server(cannot exceeding the MAX_DATA_LEN
+**					message_len: the length of the binary
+**					use_mask: 0/1; 1 means using mask for bynary
+**					wsclient: the websocket client context
+** Return         : None
+**************************************************************************************************/
+void ws_sendBinary(uint8_t* message, int message_len, int use_mask, wsclient_context *wsclient);
+
+/*************************************************************************************************
+** Function Name  : ws_sendPing
+** Description    : Sending Ping to websocket server
+** Input          : wsclient: the websocket client context
+** Return         : None
+**************************************************************************************************/
+void ws_sendPing(wsclient_context *wsclient);
+
+/*************************************************************************************************
+** Function Name  : ws_poll
+** Description    : Receicing data from server and send the data in tx_buf
+** Input          : timeout(in milliseconds)
+					wsclient: the websocket client context
+** Return         : None
+**************************************************************************************************/
+void ws_poll(int timeout, wsclient_context *wsclient);
+
+/*************************************************************************************************
+** Function Name  : ws_dispatch
+** Description    : callback function when getting message from server
+** Input          : function that resolve the message received and the message length
+** Return         : None
+**************************************************************************************************/
+void ws_dispatch(void (*callback)(wsclient_context *, int)) ;
+
+/*************************************************************************************************
+** Function Name  : ws_getReadyState
+** Description    : Getting the connection status
+** Input          : wsclient: the websocket client context
+** Return         : readyStateValues(4 types:CLOSING, CLOSED, CONNECTING, OPEN) 
+**************************************************************************************************/
+readyStateValues ws_getReadyState(wsclient_context *wsclient);
+
+/*************************************************************************************************
+** Function Name  : ws_close
+** Description    : Closing the connection with websocket server
+** Input          : wsclient: the websocket client context
+** Return         : None
+**************************************************************************************************/
+void ws_close(wsclient_context *wsclient);
+
+#endif

RTL00_SDKV35a/component/common/utilities/tcpecho.c

@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2001-2003 Swedish Institute of Computer Science.
+ * All rights reserved. 
+ * 
+ * Redistribution and use in source and binary forms, with or without modification, 
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ * 
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ */
+
+
+#include "lwip/opt.h"
+
+#if LWIP_NETCONN
+
+#include "lwip/sys.h"
+#include "lwip/api.h"
+
+#define TCPECHO_THREAD_PRIO  ( tskIDLE_PRIORITY + 3 )
+
+
+
+/*-----------------------------------------------------------------------------------*/
+static void tcpecho_thread(void *arg)
+{
+  struct netconn *conn, *newconn;
+  err_t err;
+
+  LWIP_UNUSED_ARG(arg);
+
+  /* Create a new connection identifier. */
+  conn = netconn_new(NETCONN_TCP);
+  
+  if (conn!=NULL)
+  {  
+    /* Bind connection to well known port number 7. */
+    err = netconn_bind(conn, NULL, 7);
+    
+    if (err == ERR_OK)
+    {
+      /* Tell connection to go into listening mode. */
+      netconn_listen(conn);
+    
+      while (1) 
+      {
+        /* Grab new connection. */
+        newconn = netconn_accept(conn);
+    
+        /* Process the new connection. */
+        if (newconn) 
+        {
+          struct netbuf *buf;
+          void *data;
+          u16_t len;
+      
+          while ((buf = netconn_recv(newconn)) != NULL) 
+          {
+            do 
+            {
+              netbuf_data(buf, &data, &len);
+              netconn_write(newconn, data, len, NETCONN_COPY);
+          
+            } 
+            while (netbuf_next(buf) >= 0);
+          
+            netbuf_delete(buf);
+          }
+        
+          /* Close connection and discard connection identifier. */
+          netconn_close(newconn);
+          netconn_delete(newconn);
+        }
+      }
+    }
+    else
+    {
+      printf(" can not bind TCP netconn");
+    }
+  }
+  else
+  {
+    printf("can not create TCP netconn");
+  }
+}
+/*-----------------------------------------------------------------------------------*/
+
+void tcpecho_init(void)
+{
+  sys_thread_new("tcpecho_thread", tcpecho_thread, NULL, DEFAULT_THREAD_STACKSIZE, TCPECHO_THREAD_PRIO);
+}
+/*-----------------------------------------------------------------------------------*/
+
+void cmd_tcpecho(int argc, char **argv)
+{
+	printf("\n\rInit TCP ECHO Server ...");
+	tcpecho_init();
+	printf("\n\r\nPlease use echotool to connect to this echo server. ex. echotool 192.168.0.1 /p tcp /r 7 /n 0");
+}
+#endif /* LWIP_NETCONN */

RTL00_SDKV35a/component/common/utilities/udpecho.c

@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2001-2003 Swedish Institute of Computer Science.
+ * All rights reserved. 
+ * 
+ * Redistribution and use in source and binary forms, with or without modification, 
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ * 
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ */
+
+
+#include "lwip/opt.h"
+
+#if LWIP_NETCONN
+
+#include "lwip/api.h"
+#include "lwip/sys.h"
+
+
+#define UDPECHO_THREAD_PRIO  ( tskIDLE_PRIORITY + 3 )
+
+static struct netconn *conn;
+static struct netbuf *buf;
+static struct ip_addr *addr;
+static unsigned short port;
+/*-----------------------------------------------------------------------------------*/
+static void udpecho_thread(void *arg)
+{
+  err_t err;
+  
+  LWIP_UNUSED_ARG(arg);
+
+  conn = netconn_new(NETCONN_UDP);
+  if (conn!= NULL)
+  {
+    err = netconn_bind(conn, IP_ADDR_ANY, 7);
+    if (err == ERR_OK)
+    {
+      while (1) 
+      {
+        buf = netconn_recv(conn);
+      
+        if (buf!= NULL) 
+        {
+          addr = netbuf_fromaddr(buf);
+          port = netbuf_fromport(buf);
+          netconn_connect(conn, addr, port);
+          buf->addr = NULL;
+          netconn_send(conn,buf);
+          netbuf_delete(buf);
+        }
+      }
+    }
+    else
+    {
+      printf("can not bind netconn");
+    }
+  }
+  else
+  {
+    printf("can create new UDP netconn");
+  }
+}
+/*-----------------------------------------------------------------------------------*/
+void udpecho_init(void)
+{
+  sys_thread_new("udpecho_thread", udpecho_thread, NULL, DEFAULT_THREAD_STACKSIZE,UDPECHO_THREAD_PRIO );
+}
+
+#endif /* LWIP_NETCONN */

RTL00_SDKV35a/component/common/video/v4l2/inc/media-device.h

@@ -0,0 +1,105 @@
+/*
+ * Media device
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _MEDIA_DEVICE_H
+#define _MEDIA_DEVICE_H
+
+#if 0
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#endif
+
+#include "v4l2-osdep.h"
+#include "media-devnode.h"
+#include "media-entity.h"
+
+
+//struct device;
+
+/**
+ * struct media_device - Media device
+ * @dev:	Parent device
+ * @devnode:	Media device node
+ * @model:	Device model name
+ * @serial:	Device serial number (optional)
+ * @bus_info:	Unique and stable device location identifier
+ * @hw_revision: Hardware device revision
+ * @driver_version: Device driver version
+ * @entity_id:	ID of the next entity to be registered
+ * @entities:	List of registered entities
+ * @lock:	Entities list lock
+ * @graph_mutex: Entities graph operation lock
+ * @link_notify: Link state change notification callback
+ *
+ * This structure represents an abstract high-level media device. It allows easy
+ * access to entities and provides basic media device-level support. The
+ * structure can be allocated directly or embedded in a larger structure.
+ *
+ * The parent @dev is a physical device. It must be set before registering the
+ * media device.
+ *
+ * @model is a descriptive model name exported through sysfs. It doesn't have to
+ * be unique.
+ */
+struct media_device {
+	/* dev->driver_data points to this struct. */
+	//struct device *dev;
+	struct media_devnode devnode;
+
+	char model[32];
+	char serial[40];
+	char bus_info[32];
+	u32 hw_revision;
+	u32 driver_version;
+
+	u32 entity_id;
+	struct list_head entities;
+
+	/* Protects the entities list */
+	spinlock_t lock;
+	/* Serializes graph operations. */
+	//struct mutex graph_mutex;
+	_Mutex graph_mutex;
+
+	int (*link_notify)(struct media_link *link, u32 flags, unsigned int notification);
+};
+
+/* Supported link_notify @notification values. */
+#define MEDIA_DEV_NOTIFY_PRE_LINK_CH	0
+#define MEDIA_DEV_NOTIFY_POST_LINK_CH	1
+
+/* media_devnode to media_device */
+#define to_media_device(node) container_of(node, struct media_device, devnode)
+
+int media_device_register(struct media_device *mdev);
+void media_device_unregister(struct media_device *mdev);
+
+int media_device_register_entity(struct media_device *mdev,
+					      struct media_entity *entity);
+void media_device_unregister_entity(struct media_entity *entity);
+
+/* Iterate over all entities. */
+#define media_device_for_each_entity(entity, mdev, type)			\
+	list_for_each_entry(entity, &(mdev)->entities, list, type)
+
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/media-devnode.h

@@ -0,0 +1,104 @@
+/*
+ * Media device node
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * --
+ *
+ * Common functions for media-related drivers to register and unregister media
+ * device nodes.
+ */
+
+#ifndef _MEDIA_DEVNODE_H
+#define _MEDIA_DEVNODE_H
+
+#if 0
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+#endif
+
+
+/*
+ * Flag to mark the media_devnode struct as registered. Drivers must not touch
+ * this flag directly, it will be set and cleared by media_devnode_register and
+ * media_devnode_unregister.
+ */
+#define MEDIA_FLAG_REGISTERED	0
+
+struct media_file_operations {
+	//struct module *owner;
+#if 0	
+	ssize_t (*read) (char __user *, size_t, loff_t *);
+	ssize_t (*write) (const char __user *, size_t, loff_t *);
+	unsigned int (*poll) (struct poll_table_struct *);
+#endif
+	long (*ioctl) (unsigned int, unsigned long);
+	long (*compat_ioctl) (unsigned int, unsigned long);
+	int (*open) ();
+	int (*release) ();
+};
+
+/**
+ * struct media_devnode - Media device node
+ * @parent:	parent device
+ * @minor:	device node minor number
+ * @flags:	flags, combination of the MEDIA_FLAG_* constants
+ *
+ * This structure represents a media-related device node.
+ *
+ * The @parent is a physical device. It must be set by core or device drivers
+ * before registering the node.
+ */
+struct media_devnode {
+	/* device ops */
+	const struct media_file_operations *fops;
+
+	/* sysfs */
+#if 0	
+	struct device dev;		/* media device */
+	struct cdev cdev;		/* character device */
+	struct device *parent;		/* device parent */
+#endif
+	/* device info */
+	int minor;
+	unsigned long flags;		/* Use bitops to access flags */
+
+	/* callbacks */
+	void (*release)(struct media_devnode *mdev);
+};
+
+/* dev to media_devnode */
+#define to_media_devnode(minor) container_of(minor, struct media_devnode, dev)
+
+int media_devnode_register(struct media_devnode *mdev);
+void media_devnode_unregister(struct media_devnode *mdev);
+#if 0
+static inline struct media_devnode *media_devnode_data()
+{
+	return private_data;
+}
+#endif
+static inline int media_devnode_is_registered(struct media_devnode *mdev)
+{
+	return test_bit(MEDIA_FLAG_REGISTERED, &mdev->flags);
+}
+
+#endif /* _MEDIA_DEVNODE_H */

RTL00_SDKV35a/component/common/video/v4l2/inc/media-entity.h

@@ -0,0 +1,164 @@
+/*
+ * Media entity
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *	     Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _MEDIA_ENTITY_H
+#define _MEDIA_ENTITY_H
+
+#if 0
+#include <linux/bitops.h>
+#include <linux/list.h>
+#include <linux/media.h>
+#endif
+#include "v4l2-osdep.h"
+
+
+struct media_pipeline {
+  int media_test;
+};
+
+struct media_link {
+	struct media_pad *source;	/* Source pad */
+	struct media_pad *sink;		/* Sink pad  */
+	struct media_link *reverse;	/* Link in the reverse direction */
+	unsigned long flags;		/* Link flags (MEDIA_LNK_FL_*) */
+};
+
+struct media_pad {
+	struct media_entity *entity;	/* Entity this pad belongs to */
+	u16 index;			/* Pad index in the entity pads array */
+	unsigned long flags;		/* Pad flags (MEDIA_PAD_FL_*) */
+};
+
+struct media_entity_operations {
+	int (*link_setup)(struct media_entity *entity,
+			  const struct media_pad *local,
+			  const struct media_pad *remote, u32 flags);
+	int (*link_validate)(struct media_link *link);
+};
+
+struct media_entity {
+	//struct LISlist;
+	struct media_device *parent;	/* Media device this entity belongs to*/
+	u32 id;				/* Entity ID, unique in the parent media
+					 * device context */
+	const char *name;		/* Entity name */
+	u32 type;			/* Entity type (MEDIA_ENT_T_*) */
+	u32 revision;			/* Entity revision, driver specific */
+	unsigned long flags;		/* Entity flags (MEDIA_ENT_FL_*) */
+	u32 group_id;			/* Entity group ID */
+
+	u16 num_pads;			/* Number of sink and source pads */
+	u16 num_links;			/* Number of existing links, both
+					 * enabled and disabled */
+	u16 num_backlinks;		/* Number of backlinks */
+	u16 max_links;			/* Maximum number of links */
+
+	struct media_pad *pads;		/* Pads array (num_pads elements) */
+	struct media_link *links;	/* Links array (max_links elements)*/
+
+	const struct media_entity_operations *ops;	/* Entity operations */
+
+	/* Reference counts must never be negative, but are signed integers on
+	 * purpose: a simple WARN_ON(<0) check can be used to detect reference
+	 * count bugs that would make them negative.
+	 */
+	int stream_count;		/* Stream count for the entity. */
+	int use_count;			/* Use count for the entity. */
+
+	struct media_pipeline *pipe;	/* Pipeline this entity belongs to. */
+
+	union {
+		/* Node specifications */
+		struct {
+			u32 major;
+			u32 minor;
+		} v4l;
+		struct {
+			u32 major;
+			u32 minor;
+		} fb;
+		struct {
+			u32 card;
+			u32 device;
+			u32 subdevice;
+		} alsa;
+		int dvb;
+
+		/* Sub-device specifications */
+		/* Nothing needed yet */
+	} info;
+};
+#if 0
+static inline u32 media_entity_type(struct media_entity *entity)
+{
+	return entity->type & MEDIA_ENT_TYPE_MASK;
+}
+
+static inline u32 media_entity_subtype(struct media_entity *entity)
+{
+	return entity->type & MEDIA_ENT_SUBTYPE_MASK;
+}
+
+#define MEDIA_ENTITY_ENUM_MAX_DEPTH	16
+#define MEDIA_ENTITY_ENUM_MAX_ID	64
+
+struct media_entity_graph {
+	struct {
+		struct media_entity *entity;
+		int link;
+	} stack[MEDIA_ENTITY_ENUM_MAX_DEPTH];
+
+	DECLARE_BITMAP(entities, MEDIA_ENTITY_ENUM_MAX_ID);
+	int top;
+};
+
+int media_entity_init(struct media_entity *entity, u16 num_pads,
+		struct media_pad *pads, u16 extra_links);
+void media_entity_cleanup(struct media_entity *entity);
+
+int media_entity_create_link(struct media_entity *source, u16 source_pad,
+		struct media_entity *sink, u16 sink_pad, u32 flags);
+void __media_entity_remove_links(struct media_entity *entity);
+void media_entity_remove_links(struct media_entity *entity);
+
+int __media_entity_setup_link(struct media_link *link, u32 flags);
+int media_entity_setup_link(struct media_link *link, u32 flags);
+struct media_link *media_entity_find_link(struct media_pad *source,
+		struct media_pad *sink);
+struct media_pad *media_entity_remote_pad(struct media_pad *pad);
+
+struct media_entity *media_entity_get(struct media_entity *entity);
+void media_entity_put(struct media_entity *entity);
+
+void media_entity_graph_walk_start(struct media_entity_graph *graph,
+		struct media_entity *entity);
+struct media_entity *
+media_entity_graph_walk_next(struct media_entity_graph *graph);
+int media_entity_pipeline_start(struct media_entity *entity,
+					     struct media_pipeline *pipe);
+void media_entity_pipeline_stop(struct media_entity *entity);
+
+#define media_entity_call(entity, operation, args...)			\
+	(((entity)->ops && (entity)->ops->operation) ?			\
+	 (entity)->ops->operation((entity) , ##args) : -ENOIOCTLCMD)
+#endif
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/uapi_v4l2-common.h

@@ -0,0 +1,71 @@
+/*
+ * include/linux/v4l2-common.h
+ *
+ * Common V4L2 and V4L2 subdev definitions.
+ *
+ * Users are advised to #include this file either through videodev2.h
+ * (V4L2) or through v4l2-subdev.h (V4L2 subdev) rather than to refer
+ * to this file directly.
+ *
+ * Copyright (C) 2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __V4L2_COMMON__
+#define __V4L2_COMMON__
+
+/*
+ *
+ * Selection interface definitions
+ *
+ */
+
+/* Current cropping area */
+#define V4L2_SEL_TGT_CROP		0x0000
+/* Default cropping area */
+#define V4L2_SEL_TGT_CROP_DEFAULT	0x0001
+/* Cropping bounds */
+#define V4L2_SEL_TGT_CROP_BOUNDS	0x0002
+/* Current composing area */
+#define V4L2_SEL_TGT_COMPOSE		0x0100
+/* Default composing area */
+#define V4L2_SEL_TGT_COMPOSE_DEFAULT	0x0101
+/* Composing bounds */
+#define V4L2_SEL_TGT_COMPOSE_BOUNDS	0x0102
+/* Current composing area plus all padding pixels */
+#define V4L2_SEL_TGT_COMPOSE_PADDED	0x0103
+
+/* Backward compatibility target definitions --- to be removed. */
+#define V4L2_SEL_TGT_CROP_ACTIVE	V4L2_SEL_TGT_CROP
+#define V4L2_SEL_TGT_COMPOSE_ACTIVE	V4L2_SEL_TGT_COMPOSE
+#define V4L2_SUBDEV_SEL_TGT_CROP_ACTUAL	V4L2_SEL_TGT_CROP
+#define V4L2_SUBDEV_SEL_TGT_COMPOSE_ACTUAL V4L2_SEL_TGT_COMPOSE
+#define V4L2_SUBDEV_SEL_TGT_CROP_BOUNDS	V4L2_SEL_TGT_CROP_BOUNDS
+#define V4L2_SUBDEV_SEL_TGT_COMPOSE_BOUNDS V4L2_SEL_TGT_COMPOSE_BOUNDS
+
+/* Selection flags */
+#define V4L2_SEL_FLAG_GE		(1 << 0)
+#define V4L2_SEL_FLAG_LE		(1 << 1)
+#define V4L2_SEL_FLAG_KEEP_CONFIG	(1 << 2)
+
+/* Backward compatibility flag definitions --- to be removed. */
+#define V4L2_SUBDEV_SEL_FLAG_SIZE_GE	V4L2_SEL_FLAG_GE
+#define V4L2_SUBDEV_SEL_FLAG_SIZE_LE	V4L2_SEL_FLAG_LE
+#define V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG V4L2_SEL_FLAG_KEEP_CONFIG
+
+#endif /* __V4L2_COMMON__ */

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-async.h

@@ -0,0 +1,99 @@
+/*
+ * V4L2 asynchronous subdevice registration API
+ *
+ * Copyright (C) 2012-2013, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef V4L2_ASYNC_H
+#define V4L2_ASYNC_H
+#if 0
+#include <linux/list.h>
+#include <linux/mutex.h>
+#endif
+#include "v4l2-osdep.h"
+
+
+//struct device;
+//struct device_node;
+struct v4l2_device;
+struct v4l2_subdev;
+struct v4l2_async_notifier;
+
+/* A random max subdevice number, used to allocate an array on stack */
+#define V4L2_MAX_SUBDEVS 128U
+
+enum v4l2_async_match_type {
+	V4L2_ASYNC_MATCH_CUSTOM,
+	V4L2_ASYNC_MATCH_DEVNAME,
+	V4L2_ASYNC_MATCH_I2C,
+	V4L2_ASYNC_MATCH_OF,
+};
+
+/**
+ * struct v4l2_async_subdev - sub-device descriptor, as known to a bridge
+ * @bus_type:	subdevice bus type to select the appropriate matching method
+ * @match:	union of per-bus type matching data sets
+ * @list:	used to link struct v4l2_async_subdev objects, waiting to be
+ *		probed, to a notifier->waiting list
+ */
+struct v4l2_async_subdev {
+	enum v4l2_async_match_type match_type;
+	union {
+		struct {
+			const struct device_node *node;
+		} of;
+		struct {
+			const char *name;
+		} device_name;
+		struct {
+			int adapter_id;
+			unsigned short address;
+		} i2c;
+		struct {
+			bool (*match)(const char *dev_init_name, struct v4l2_async_subdev *);
+			void *priv;
+		} custom;
+	} match;
+
+	/* v4l2-async core private: not to be used by drivers */
+	struct list_head list;
+};
+
+/**
+ * v4l2_async_notifier - v4l2_device notifier data
+ * @num_subdevs:number of subdevices
+ * @subdevs:	array of pointers to subdevice descriptors
+ * @v4l2_dev:	pointer to struct v4l2_device
+ * @waiting:	list of struct v4l2_async_subdev, waiting for their drivers
+ * @done:	list of struct v4l2_subdev, already probed
+ * @list:	member in a global list of notifiers
+ * @bound:	a subdevice driver has successfully probed one of subdevices
+ * @complete:	all subdevices have been probed successfully
+ * @unbind:	a subdevice is leaving
+ */
+struct v4l2_async_notifier {
+	unsigned int num_subdevs;
+	struct v4l2_async_subdev **subdevs;
+	struct v4l2_device *v4l2_dev;
+	struct list_head waiting;
+	struct list_head done;
+	struct list_head list;
+	int (*bound)(struct v4l2_async_notifier *notifier,
+		     struct v4l2_subdev *subdev,
+		     struct v4l2_async_subdev *asd);
+	int (*complete)(struct v4l2_async_notifier *notifier);
+	void (*unbind)(struct v4l2_async_notifier *notifier,
+		       struct v4l2_subdev *subdev,
+		       struct v4l2_async_subdev *asd);
+};
+
+int v4l2_async_notifier_register(struct v4l2_device *v4l2_dev,
+				 struct v4l2_async_notifier *notifier);
+void v4l2_async_notifier_unregister(struct v4l2_async_notifier *notifier);
+int v4l2_async_register_subdev(struct v4l2_subdev *sd);
+void v4l2_async_unregister_subdev(struct v4l2_subdev *sd);
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-clk.h

@@ -0,0 +1,59 @@
+/*
+ * V4L2 clock service
+ *
+ * Copyright (C) 2012-2013, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ATTENTION: This is a temporary API and it shall be replaced by the generic
+ * clock API, when the latter becomes widely available.
+ */
+
+#ifndef MEDIA_V4L2_CLK_H
+#define MEDIA_V4L2_CLK_H
+
+#if 0
+#include <linux/atomic.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#endif
+#include "v4l2-osdep.h"
+
+
+//struct module;
+//struct device;
+
+struct v4l2_clk {
+	struct LIST_HEADER list;
+	const struct v4l2_clk_ops *ops;
+	const char *dev_id;
+	const char *id;
+	int enable;
+	//struct mutex lock; /* Protect the enable count */
+	_Mutex lock;
+	atomic_t use_count;
+	void *priv;
+};
+
+struct v4l2_clk_ops {
+	//struct module	*owner;
+	int		(*enable)(struct v4l2_clk *clk);
+	void		(*disable)(struct v4l2_clk *clk);
+	unsigned long	(*get_rate)(struct v4l2_clk *clk);
+	int		(*set_rate)(struct v4l2_clk *clk, unsigned long);
+};
+
+struct v4l2_clk *v4l2_clk_register(const struct v4l2_clk_ops *ops,
+				   const char *dev_name,
+				   const char *name, void *priv);
+void v4l2_clk_unregister(struct v4l2_clk *clk);
+struct v4l2_clk *v4l2_clk_get(const char *id);
+void v4l2_clk_put(struct v4l2_clk *clk);
+int v4l2_clk_enable(struct v4l2_clk *clk);
+void v4l2_clk_disable(struct v4l2_clk *clk);
+unsigned long v4l2_clk_get_rate(struct v4l2_clk *clk);
+int v4l2_clk_set_rate(struct v4l2_clk *clk, unsigned long rate);
+
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-common.h

@@ -0,0 +1,210 @@
+/*
+    v4l2 common internal API header
+
+    This header contains internal shared ioctl definitions for use by the
+    internal low-level v4l2 drivers.
+    Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal
+    define,
+
+    Copyright (C) 2005  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef V4L2_COMMON_H_
+#define V4L2_COMMON_H_
+
+#include "v4l2-dev.h"
+
+
+/* Common printk constucts for v4l-i2c drivers. These macros create a unique
+   prefix consisting of the driver name, the adapter number and the i2c
+   address. */
+#if 0   
+#define v4l_printk(level, name, adapter, addr, fmt, arg...) \
+	printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg)
+
+#define v4l_client_printk(level, client, fmt, arg...)			    \
+	v4l_printk(level, (client)->driver->driver.name, (client)->adapter, \
+		   (client)->addr, fmt , ## arg)
+
+#define v4l_err(client, fmt, arg...) \
+	v4l_client_printk(KERN_ERR, client, fmt , ## arg)
+
+#define v4l_warn(client, fmt, arg...) \
+	v4l_client_printk(KERN_WARNING, client, fmt , ## arg)
+
+#define v4l_info(client, fmt, arg...) \
+	v4l_client_printk(KERN_INFO, client, fmt , ## arg)
+
+/* These three macros assume that the debug level is set with a module
+   parameter called 'debug'. */
+#define v4l_dbg(level, debug, client, fmt, arg...)			     \
+	do { 								     \
+		if (debug >= (level))					     \
+			v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
+	} while (0)
+#endif
+/* ------------------------------------------------------------------------- */
+#if 0
+/* These printk constructs can be used with v4l2_device and v4l2_subdev */
+#define v4l2_printk(level, dev, fmt, arg...) \
+	printk(level "%s: " fmt, (dev)->name , ## arg)
+
+#define v4l2_err(dev, fmt, arg...) \
+	v4l2_printk(KERN_ERR, dev, fmt , ## arg)
+
+#define v4l2_warn(dev, fmt, arg...) \
+	v4l2_printk(KERN_WARNING, dev, fmt , ## arg)
+
+#define v4l2_info(dev, fmt, arg...) \
+	v4l2_printk(KERN_INFO, dev, fmt , ## arg)
+
+/* These three macros assume that the debug level is set with a module
+   parameter called 'debug'. */
+#define v4l2_dbg(level, debug, dev, fmt, arg...)			\
+	do { 								\
+		if (debug >= (level))					\
+			v4l2_printk(KERN_DEBUG, dev, fmt , ## arg); 	\
+	} while (0)
+#endif
+/* ------------------------------------------------------------------------- */
+//edit by Ian -- remove control helper functions
+#if 0
+/* Control helper functions */
+
+int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl,
+		const char * const *menu_items);
+const char *v4l2_ctrl_get_name(u32 id);
+const char * const *v4l2_ctrl_get_menu(u32 id);
+const s64 *v4l2_ctrl_get_int_menu(u32 id, u32 *len);
+int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def);
+int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu,
+		struct v4l2_queryctrl *qctrl, const char * const *menu_items);
+#define V4L2_CTRL_MENU_IDS_END (0xffffffff)
+int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids);
+#endif
+/* Note: ctrl_classes points to an array of u32 pointers. Each u32 array is a
+   0-terminated array of control IDs. Each array must be sorted low to high
+   and belong to the same control class. The array of u32 pointers must also
+   be sorted, from low class IDs to high class IDs. */
+//u32 v4l2_ctrl_next(const u32 * const *ctrl_classes, u32 id);
+
+/* ------------------------------------------------------------------------- */
+
+/* I2C Helper functions */
+#if 0
+struct i2c_driver;
+struct i2c_adapter;
+struct i2c_client;
+struct i2c_device_id;
+struct v4l2_device;
+struct v4l2_subdev;
+struct v4l2_subdev_ops;
+
+
+/* Load an i2c module and return an initialized v4l2_subdev struct.
+   The client_type argument is the name of the chip that's on the adapter. */
+struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter, const char *client_type,
+		u8 addr, const unsigned short *probe_addrs);
+
+struct i2c_board_info;
+
+struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
+		struct i2c_adapter *adapter, struct i2c_board_info *info,
+		const unsigned short *probe_addrs);
+
+/* Initialize a v4l2_subdev with data from an i2c_client struct */
+void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
+		const struct v4l2_subdev_ops *ops);
+/* Return i2c client address of v4l2_subdev. */
+unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd);
+
+enum v4l2_i2c_tuner_type {
+	ADDRS_RADIO,	/* Radio tuner addresses */
+	ADDRS_DEMOD,	/* Demod tuner addresses */
+	ADDRS_TV,	/* TV tuner addresses */
+	/* TV tuner addresses if demod is present, this excludes
+	   addresses used by the demodulator from the list of
+	   candidates. */
+	ADDRS_TV_WITH_DEMOD,
+};
+/* Return a list of I2C tuner addresses to probe. Use only if the tuner
+   addresses are unknown. */
+const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type);
+
+/* ------------------------------------------------------------------------- */
+
+/* SPI Helper functions */
+#if defined(CONFIG_SPI)
+
+#include <linux/spi/spi.h>
+
+struct spi_device;
+
+/* Load an spi module and return an initialized v4l2_subdev struct.
+   The client_type argument is the name of the chip that's on the adapter. */
+struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev,
+		struct spi_master *master, struct spi_board_info *info);
+
+/* Initialize a v4l2_subdev with data from an spi_device struct */
+void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi,
+		const struct v4l2_subdev_ops *ops);
+#endif
+#endif
+/* ------------------------------------------------------------------------- */
+#if 0
+/* Note: these remaining ioctls/structs should be removed as well, but they are
+   still used in tuner-simple.c (TUNER_SET_CONFIG), cx18/ivtv (RESET) and
+   v4l2-int-device.h (v4l2_routing). To remove these ioctls some more cleanup
+   is needed in those modules. */
+
+/* s_config */
+struct v4l2_priv_tun_config {
+	int tuner;
+	void *priv;
+};
+#define TUNER_SET_CONFIG           _IOW('d', 92, struct v4l2_priv_tun_config)
+
+#define VIDIOC_INT_RESET            	_IOW ('d', 102, u32)
+
+struct v4l2_routing {
+	u32 input;
+	u32 output;
+};
+#endif
+/* ------------------------------------------------------------------------- */
+
+/* Miscellaneous helper functions */
+#if 0
+void v4l_bound_align_image(u32*w, unsigned int wmin,
+			   unsigned int wmax, unsigned int walign,
+			   u32 *h, unsigned int hmin,
+			   unsigned int hmax, unsigned int halign,
+			   unsigned int salign);
+
+struct v4l2_discrete_probe {
+	const struct v4l2_frmsize_discrete	*sizes;
+	int					num_sizes;
+};
+
+const struct v4l2_frmsize_discrete *v4l2_find_nearest_format(
+		const struct v4l2_discrete_probe *probe,
+		s32 width, s32 height);
+#endif
+//void v4l2_get_timestamp(struct timeval *tv);
+
+#endif /* V4L2_COMMON_H_ */

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-controls.h

@@ -0,0 +1,885 @@
+/*
+ *  Video for Linux Two controls header file
+ *
+ *  Copyright (C) 1999-2012 the contributors
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  Alternatively you can redistribute this file under the terms of the
+ *  BSD license as stated below:
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *  3. The names of its contributors may not be used to endorse or promote
+ *     products derived from this software without specific prior written
+ *     permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  The contents of this header was split off from videodev2.h. All control
+ *  definitions should be added to this header, which is included by
+ *  videodev2.h.
+ */
+
+#ifndef __LINUX_V4L2_CONTROLS_H
+#define __LINUX_V4L2_CONTROLS_H
+
+/* Control classes */
+#define V4L2_CTRL_CLASS_USER		0x00980000	/* Old-style 'user' controls */
+#define V4L2_CTRL_CLASS_MPEG		0x00990000	/* MPEG-compression controls */
+#define V4L2_CTRL_CLASS_CAMERA		0x009a0000	/* Camera class controls */
+#define V4L2_CTRL_CLASS_FM_TX		0x009b0000	/* FM Modulator controls */
+#define V4L2_CTRL_CLASS_FLASH		0x009c0000	/* Camera flash controls */
+#define V4L2_CTRL_CLASS_JPEG		0x009d0000	/* JPEG-compression controls */
+#define V4L2_CTRL_CLASS_IMAGE_SOURCE	0x009e0000	/* Image source controls */
+#define V4L2_CTRL_CLASS_IMAGE_PROC	0x009f0000	/* Image processing controls */
+#define V4L2_CTRL_CLASS_DV		0x00a00000	/* Digital Video controls */
+#define V4L2_CTRL_CLASS_FM_RX		0x00a10000	/* FM Receiver controls */
+
+/* User-class control IDs */
+
+#define V4L2_CID_BASE			(V4L2_CTRL_CLASS_USER | 0x900)
+#define V4L2_CID_USER_BASE 		V4L2_CID_BASE
+#define V4L2_CID_USER_CLASS 		(V4L2_CTRL_CLASS_USER | 1)
+#define V4L2_CID_BRIGHTNESS		(V4L2_CID_BASE+0)
+#define V4L2_CID_CONTRAST		(V4L2_CID_BASE+1)
+#define V4L2_CID_SATURATION		(V4L2_CID_BASE+2)
+#define V4L2_CID_HUE			(V4L2_CID_BASE+3)
+#define V4L2_CID_AUDIO_VOLUME		(V4L2_CID_BASE+5)
+#define V4L2_CID_AUDIO_BALANCE		(V4L2_CID_BASE+6)
+#define V4L2_CID_AUDIO_BASS		(V4L2_CID_BASE+7)
+#define V4L2_CID_AUDIO_TREBLE		(V4L2_CID_BASE+8)
+#define V4L2_CID_AUDIO_MUTE		(V4L2_CID_BASE+9)
+#define V4L2_CID_AUDIO_LOUDNESS		(V4L2_CID_BASE+10)
+#define V4L2_CID_BLACK_LEVEL		(V4L2_CID_BASE+11) /* Deprecated */
+#define V4L2_CID_AUTO_WHITE_BALANCE	(V4L2_CID_BASE+12)
+#define V4L2_CID_DO_WHITE_BALANCE	(V4L2_CID_BASE+13)
+#define V4L2_CID_RED_BALANCE		(V4L2_CID_BASE+14)
+#define V4L2_CID_BLUE_BALANCE		(V4L2_CID_BASE+15)
+#define V4L2_CID_GAMMA			(V4L2_CID_BASE+16)
+#define V4L2_CID_WHITENESS		(V4L2_CID_GAMMA) /* Deprecated */
+#define V4L2_CID_EXPOSURE		(V4L2_CID_BASE+17)
+#define V4L2_CID_AUTOGAIN		(V4L2_CID_BASE+18)
+#define V4L2_CID_GAIN			(V4L2_CID_BASE+19)
+#define V4L2_CID_HFLIP			(V4L2_CID_BASE+20)
+#define V4L2_CID_VFLIP			(V4L2_CID_BASE+21)
+
+#define V4L2_CID_POWER_LINE_FREQUENCY	(V4L2_CID_BASE+24)
+enum v4l2_power_line_frequency {
+	V4L2_CID_POWER_LINE_FREQUENCY_DISABLED	= 0,
+	V4L2_CID_POWER_LINE_FREQUENCY_50HZ	= 1,
+	V4L2_CID_POWER_LINE_FREQUENCY_60HZ	= 2,
+	V4L2_CID_POWER_LINE_FREQUENCY_AUTO	= 3,
+};
+#define V4L2_CID_HUE_AUTO			(V4L2_CID_BASE+25)
+#define V4L2_CID_WHITE_BALANCE_TEMPERATURE	(V4L2_CID_BASE+26)
+#define V4L2_CID_SHARPNESS			(V4L2_CID_BASE+27)
+#define V4L2_CID_BACKLIGHT_COMPENSATION 	(V4L2_CID_BASE+28)
+#define V4L2_CID_CHROMA_AGC                     (V4L2_CID_BASE+29)
+#define V4L2_CID_COLOR_KILLER                   (V4L2_CID_BASE+30)
+#define V4L2_CID_COLORFX			(V4L2_CID_BASE+31)
+enum v4l2_colorfx {
+	V4L2_COLORFX_NONE			= 0,
+	V4L2_COLORFX_BW				= 1,
+	V4L2_COLORFX_SEPIA			= 2,
+	V4L2_COLORFX_NEGATIVE			= 3,
+	V4L2_COLORFX_EMBOSS			= 4,
+	V4L2_COLORFX_SKETCH			= 5,
+	V4L2_COLORFX_SKY_BLUE			= 6,
+	V4L2_COLORFX_GRASS_GREEN		= 7,
+	V4L2_COLORFX_SKIN_WHITEN		= 8,
+	V4L2_COLORFX_VIVID			= 9,
+	V4L2_COLORFX_AQUA			= 10,
+	V4L2_COLORFX_ART_FREEZE			= 11,
+	V4L2_COLORFX_SILHOUETTE			= 12,
+	V4L2_COLORFX_SOLARIZATION		= 13,
+	V4L2_COLORFX_ANTIQUE			= 14,
+	V4L2_COLORFX_SET_CBCR			= 15,
+};
+#define V4L2_CID_AUTOBRIGHTNESS			(V4L2_CID_BASE+32)
+#define V4L2_CID_BAND_STOP_FILTER		(V4L2_CID_BASE+33)
+
+#define V4L2_CID_ROTATE				(V4L2_CID_BASE+34)
+#define V4L2_CID_BG_COLOR			(V4L2_CID_BASE+35)
+
+#define V4L2_CID_CHROMA_GAIN                    (V4L2_CID_BASE+36)
+
+#define V4L2_CID_ILLUMINATORS_1			(V4L2_CID_BASE+37)
+#define V4L2_CID_ILLUMINATORS_2			(V4L2_CID_BASE+38)
+
+#define V4L2_CID_MIN_BUFFERS_FOR_CAPTURE	(V4L2_CID_BASE+39)
+#define V4L2_CID_MIN_BUFFERS_FOR_OUTPUT		(V4L2_CID_BASE+40)
+
+#define V4L2_CID_ALPHA_COMPONENT		(V4L2_CID_BASE+41)
+#define V4L2_CID_COLORFX_CBCR			(V4L2_CID_BASE+42)
+
+/* last CID + 1 */
+#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+43)
+
+/* USER-class private control IDs */
+
+/* The base for the meye driver controls. See linux/meye.h for the list
+ * of controls. We reserve 16 controls for this driver. */
+#define V4L2_CID_USER_MEYE_BASE			(V4L2_CID_USER_BASE + 0x1000)
+
+/* The base for the bttv driver controls.
+ * We reserve 32 controls for this driver. */
+#define V4L2_CID_USER_BTTV_BASE			(V4L2_CID_USER_BASE + 0x1010)
+
+
+/* The base for the s2255 driver controls.
+ * We reserve 16 controls for this driver. */
+#define V4L2_CID_USER_S2255_BASE		(V4L2_CID_USER_BASE + 0x1030)
+
+/* The base for the si476x driver controls. See include/media/si476x.h for the list
+ * of controls. Total of 16 controls is reserved for this driver */
+#define V4L2_CID_USER_SI476X_BASE		(V4L2_CID_USER_BASE + 0x1040)
+
+/* MPEG-class control IDs */
+/* The MPEG controls are applicable to all codec controls
+ * and the 'MPEG' part of the define is historical */
+
+#define V4L2_CID_MPEG_BASE 			(V4L2_CTRL_CLASS_MPEG | 0x900)
+#define V4L2_CID_MPEG_CLASS 			(V4L2_CTRL_CLASS_MPEG | 1)
+
+/*  MPEG streams, specific to multiplexed streams */
+#define V4L2_CID_MPEG_STREAM_TYPE 		(V4L2_CID_MPEG_BASE+0)
+enum v4l2_mpeg_stream_type {
+	V4L2_MPEG_STREAM_TYPE_MPEG2_PS   = 0, /* MPEG-2 program stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG2_TS   = 1, /* MPEG-2 transport stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG1_SS   = 2, /* MPEG-1 system stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG2_DVD  = 3, /* MPEG-2 DVD-compatible stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG1_VCD  = 4, /* MPEG-1 VCD-compatible stream */
+	V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD = 5, /* MPEG-2 SVCD-compatible stream */
+};
+#define V4L2_CID_MPEG_STREAM_PID_PMT 		(V4L2_CID_MPEG_BASE+1)
+#define V4L2_CID_MPEG_STREAM_PID_AUDIO 		(V4L2_CID_MPEG_BASE+2)
+#define V4L2_CID_MPEG_STREAM_PID_VIDEO 		(V4L2_CID_MPEG_BASE+3)
+#define V4L2_CID_MPEG_STREAM_PID_PCR 		(V4L2_CID_MPEG_BASE+4)
+#define V4L2_CID_MPEG_STREAM_PES_ID_AUDIO 	(V4L2_CID_MPEG_BASE+5)
+#define V4L2_CID_MPEG_STREAM_PES_ID_VIDEO 	(V4L2_CID_MPEG_BASE+6)
+#define V4L2_CID_MPEG_STREAM_VBI_FMT 		(V4L2_CID_MPEG_BASE+7)
+enum v4l2_mpeg_stream_vbi_fmt {
+	V4L2_MPEG_STREAM_VBI_FMT_NONE = 0,  /* No VBI in the MPEG stream */
+	V4L2_MPEG_STREAM_VBI_FMT_IVTV = 1,  /* VBI in private packets, IVTV format */
+};
+
+/*  MPEG audio controls specific to multiplexed streams  */
+#define V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ 	(V4L2_CID_MPEG_BASE+100)
+enum v4l2_mpeg_audio_sampling_freq {
+	V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100 = 0,
+	V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000 = 1,
+	V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000 = 2,
+};
+#define V4L2_CID_MPEG_AUDIO_ENCODING 		(V4L2_CID_MPEG_BASE+101)
+enum v4l2_mpeg_audio_encoding {
+	V4L2_MPEG_AUDIO_ENCODING_LAYER_1 = 0,
+	V4L2_MPEG_AUDIO_ENCODING_LAYER_2 = 1,
+	V4L2_MPEG_AUDIO_ENCODING_LAYER_3 = 2,
+	V4L2_MPEG_AUDIO_ENCODING_AAC     = 3,
+	V4L2_MPEG_AUDIO_ENCODING_AC3     = 4,
+};
+#define V4L2_CID_MPEG_AUDIO_L1_BITRATE 		(V4L2_CID_MPEG_BASE+102)
+enum v4l2_mpeg_audio_l1_bitrate {
+	V4L2_MPEG_AUDIO_L1_BITRATE_32K  = 0,
+	V4L2_MPEG_AUDIO_L1_BITRATE_64K  = 1,
+	V4L2_MPEG_AUDIO_L1_BITRATE_96K  = 2,
+	V4L2_MPEG_AUDIO_L1_BITRATE_128K = 3,
+	V4L2_MPEG_AUDIO_L1_BITRATE_160K = 4,
+	V4L2_MPEG_AUDIO_L1_BITRATE_192K = 5,
+	V4L2_MPEG_AUDIO_L1_BITRATE_224K = 6,
+	V4L2_MPEG_AUDIO_L1_BITRATE_256K = 7,
+	V4L2_MPEG_AUDIO_L1_BITRATE_288K = 8,
+	V4L2_MPEG_AUDIO_L1_BITRATE_320K = 9,
+	V4L2_MPEG_AUDIO_L1_BITRATE_352K = 10,
+	V4L2_MPEG_AUDIO_L1_BITRATE_384K = 11,
+	V4L2_MPEG_AUDIO_L1_BITRATE_416K = 12,
+	V4L2_MPEG_AUDIO_L1_BITRATE_448K = 13,
+};
+#define V4L2_CID_MPEG_AUDIO_L2_BITRATE 		(V4L2_CID_MPEG_BASE+103)
+enum v4l2_mpeg_audio_l2_bitrate {
+	V4L2_MPEG_AUDIO_L2_BITRATE_32K  = 0,
+	V4L2_MPEG_AUDIO_L2_BITRATE_48K  = 1,
+	V4L2_MPEG_AUDIO_L2_BITRATE_56K  = 2,
+	V4L2_MPEG_AUDIO_L2_BITRATE_64K  = 3,
+	V4L2_MPEG_AUDIO_L2_BITRATE_80K  = 4,
+	V4L2_MPEG_AUDIO_L2_BITRATE_96K  = 5,
+	V4L2_MPEG_AUDIO_L2_BITRATE_112K = 6,
+	V4L2_MPEG_AUDIO_L2_BITRATE_128K = 7,
+	V4L2_MPEG_AUDIO_L2_BITRATE_160K = 8,
+	V4L2_MPEG_AUDIO_L2_BITRATE_192K = 9,
+	V4L2_MPEG_AUDIO_L2_BITRATE_224K = 10,
+	V4L2_MPEG_AUDIO_L2_BITRATE_256K = 11,
+	V4L2_MPEG_AUDIO_L2_BITRATE_320K = 12,
+	V4L2_MPEG_AUDIO_L2_BITRATE_384K = 13,
+};
+#define V4L2_CID_MPEG_AUDIO_L3_BITRATE 		(V4L2_CID_MPEG_BASE+104)
+enum v4l2_mpeg_audio_l3_bitrate {
+	V4L2_MPEG_AUDIO_L3_BITRATE_32K  = 0,
+	V4L2_MPEG_AUDIO_L3_BITRATE_40K  = 1,
+	V4L2_MPEG_AUDIO_L3_BITRATE_48K  = 2,
+	V4L2_MPEG_AUDIO_L3_BITRATE_56K  = 3,
+	V4L2_MPEG_AUDIO_L3_BITRATE_64K  = 4,
+	V4L2_MPEG_AUDIO_L3_BITRATE_80K  = 5,
+	V4L2_MPEG_AUDIO_L3_BITRATE_96K  = 6,
+	V4L2_MPEG_AUDIO_L3_BITRATE_112K = 7,
+	V4L2_MPEG_AUDIO_L3_BITRATE_128K = 8,
+	V4L2_MPEG_AUDIO_L3_BITRATE_160K = 9,
+	V4L2_MPEG_AUDIO_L3_BITRATE_192K = 10,
+	V4L2_MPEG_AUDIO_L3_BITRATE_224K = 11,
+	V4L2_MPEG_AUDIO_L3_BITRATE_256K = 12,
+	V4L2_MPEG_AUDIO_L3_BITRATE_320K = 13,
+};
+#define V4L2_CID_MPEG_AUDIO_MODE 		(V4L2_CID_MPEG_BASE+105)
+enum v4l2_mpeg_audio_mode {
+	V4L2_MPEG_AUDIO_MODE_STEREO       = 0,
+	V4L2_MPEG_AUDIO_MODE_JOINT_STEREO = 1,
+	V4L2_MPEG_AUDIO_MODE_DUAL         = 2,
+	V4L2_MPEG_AUDIO_MODE_MONO         = 3,
+};
+#define V4L2_CID_MPEG_AUDIO_MODE_EXTENSION 	(V4L2_CID_MPEG_BASE+106)
+enum v4l2_mpeg_audio_mode_extension {
+	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4  = 0,
+	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_8  = 1,
+	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_12 = 2,
+	V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16 = 3,
+};
+#define V4L2_CID_MPEG_AUDIO_EMPHASIS 		(V4L2_CID_MPEG_BASE+107)
+enum v4l2_mpeg_audio_emphasis {
+	V4L2_MPEG_AUDIO_EMPHASIS_NONE         = 0,
+	V4L2_MPEG_AUDIO_EMPHASIS_50_DIV_15_uS = 1,
+	V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17    = 2,
+};
+#define V4L2_CID_MPEG_AUDIO_CRC 		(V4L2_CID_MPEG_BASE+108)
+enum v4l2_mpeg_audio_crc {
+	V4L2_MPEG_AUDIO_CRC_NONE  = 0,
+	V4L2_MPEG_AUDIO_CRC_CRC16 = 1,
+};
+#define V4L2_CID_MPEG_AUDIO_MUTE 		(V4L2_CID_MPEG_BASE+109)
+#define V4L2_CID_MPEG_AUDIO_AAC_BITRATE		(V4L2_CID_MPEG_BASE+110)
+#define V4L2_CID_MPEG_AUDIO_AC3_BITRATE		(V4L2_CID_MPEG_BASE+111)
+enum v4l2_mpeg_audio_ac3_bitrate {
+	V4L2_MPEG_AUDIO_AC3_BITRATE_32K  = 0,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_40K  = 1,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_48K  = 2,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_56K  = 3,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_64K  = 4,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_80K  = 5,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_96K  = 6,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_112K = 7,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_128K = 8,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_160K = 9,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_192K = 10,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_224K = 11,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_256K = 12,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_320K = 13,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_384K = 14,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_448K = 15,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_512K = 16,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17,
+	V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18,
+};
+#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK	(V4L2_CID_MPEG_BASE+112)
+enum v4l2_mpeg_audio_dec_playback {
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO	    = 0,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO	    = 1,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT	    = 2,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT	    = 3,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO	    = 4,
+	V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5,
+};
+#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_MPEG_BASE+113)
+
+/*  MPEG video controls specific to multiplexed streams */
+#define V4L2_CID_MPEG_VIDEO_ENCODING 		(V4L2_CID_MPEG_BASE+200)
+enum v4l2_mpeg_video_encoding {
+	V4L2_MPEG_VIDEO_ENCODING_MPEG_1     = 0,
+	V4L2_MPEG_VIDEO_ENCODING_MPEG_2     = 1,
+	V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC = 2,
+};
+#define V4L2_CID_MPEG_VIDEO_ASPECT 		(V4L2_CID_MPEG_BASE+201)
+enum v4l2_mpeg_video_aspect {
+	V4L2_MPEG_VIDEO_ASPECT_1x1     = 0,
+	V4L2_MPEG_VIDEO_ASPECT_4x3     = 1,
+	V4L2_MPEG_VIDEO_ASPECT_16x9    = 2,
+	V4L2_MPEG_VIDEO_ASPECT_221x100 = 3,
+};
+#define V4L2_CID_MPEG_VIDEO_B_FRAMES 		(V4L2_CID_MPEG_BASE+202)
+#define V4L2_CID_MPEG_VIDEO_GOP_SIZE 		(V4L2_CID_MPEG_BASE+203)
+#define V4L2_CID_MPEG_VIDEO_GOP_CLOSURE 	(V4L2_CID_MPEG_BASE+204)
+#define V4L2_CID_MPEG_VIDEO_PULLDOWN 		(V4L2_CID_MPEG_BASE+205)
+#define V4L2_CID_MPEG_VIDEO_BITRATE_MODE 	(V4L2_CID_MPEG_BASE+206)
+enum v4l2_mpeg_video_bitrate_mode {
+	V4L2_MPEG_VIDEO_BITRATE_MODE_VBR = 0,
+	V4L2_MPEG_VIDEO_BITRATE_MODE_CBR = 1,
+};
+#define V4L2_CID_MPEG_VIDEO_BITRATE 		(V4L2_CID_MPEG_BASE+207)
+#define V4L2_CID_MPEG_VIDEO_BITRATE_PEAK 	(V4L2_CID_MPEG_BASE+208)
+#define V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (V4L2_CID_MPEG_BASE+209)
+#define V4L2_CID_MPEG_VIDEO_MUTE 		(V4L2_CID_MPEG_BASE+210)
+#define V4L2_CID_MPEG_VIDEO_MUTE_YUV 		(V4L2_CID_MPEG_BASE+211)
+#define V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE		(V4L2_CID_MPEG_BASE+212)
+#define V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER	(V4L2_CID_MPEG_BASE+213)
+#define V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB		(V4L2_CID_MPEG_BASE+214)
+#define V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE			(V4L2_CID_MPEG_BASE+215)
+#define V4L2_CID_MPEG_VIDEO_HEADER_MODE				(V4L2_CID_MPEG_BASE+216)
+enum v4l2_mpeg_video_header_mode {
+	V4L2_MPEG_VIDEO_HEADER_MODE_SEPARATE			= 0,
+	V4L2_MPEG_VIDEO_HEADER_MODE_JOINED_WITH_1ST_FRAME	= 1,
+
+};
+#define V4L2_CID_MPEG_VIDEO_MAX_REF_PIC			(V4L2_CID_MPEG_BASE+217)
+#define V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE		(V4L2_CID_MPEG_BASE+218)
+#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_BYTES	(V4L2_CID_MPEG_BASE+219)
+#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MAX_MB		(V4L2_CID_MPEG_BASE+220)
+#define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE		(V4L2_CID_MPEG_BASE+221)
+enum v4l2_mpeg_video_multi_slice_mode {
+	V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE		= 0,
+	V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB		= 1,
+	V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES	= 2,
+};
+#define V4L2_CID_MPEG_VIDEO_VBV_SIZE			(V4L2_CID_MPEG_BASE+222)
+#define V4L2_CID_MPEG_VIDEO_DEC_PTS			(V4L2_CID_MPEG_BASE+223)
+#define V4L2_CID_MPEG_VIDEO_DEC_FRAME			(V4L2_CID_MPEG_BASE+224)
+#define V4L2_CID_MPEG_VIDEO_VBV_DELAY			(V4L2_CID_MPEG_BASE+225)
+#define V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER		(V4L2_CID_MPEG_BASE+226)
+
+#define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP		(V4L2_CID_MPEG_BASE+300)
+#define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP		(V4L2_CID_MPEG_BASE+301)
+#define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP		(V4L2_CID_MPEG_BASE+302)
+#define V4L2_CID_MPEG_VIDEO_H263_MIN_QP			(V4L2_CID_MPEG_BASE+303)
+#define V4L2_CID_MPEG_VIDEO_H263_MAX_QP			(V4L2_CID_MPEG_BASE+304)
+#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP		(V4L2_CID_MPEG_BASE+350)
+#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_QP		(V4L2_CID_MPEG_BASE+351)
+#define V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP		(V4L2_CID_MPEG_BASE+352)
+#define V4L2_CID_MPEG_VIDEO_H264_MIN_QP			(V4L2_CID_MPEG_BASE+353)
+#define V4L2_CID_MPEG_VIDEO_H264_MAX_QP			(V4L2_CID_MPEG_BASE+354)
+#define V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM		(V4L2_CID_MPEG_BASE+355)
+#define V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE		(V4L2_CID_MPEG_BASE+356)
+#define V4L2_CID_MPEG_VIDEO_H264_ENTROPY_MODE		(V4L2_CID_MPEG_BASE+357)
+enum v4l2_mpeg_video_h264_entropy_mode {
+	V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CAVLC	= 0,
+	V4L2_MPEG_VIDEO_H264_ENTROPY_MODE_CABAC	= 1,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_I_PERIOD		(V4L2_CID_MPEG_BASE+358)
+#define V4L2_CID_MPEG_VIDEO_H264_LEVEL			(V4L2_CID_MPEG_BASE+359)
+enum v4l2_mpeg_video_h264_level {
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_0	= 0,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1B	= 1,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_1	= 2,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_2	= 3,
+	V4L2_MPEG_VIDEO_H264_LEVEL_1_3	= 4,
+	V4L2_MPEG_VIDEO_H264_LEVEL_2_0	= 5,
+	V4L2_MPEG_VIDEO_H264_LEVEL_2_1	= 6,
+	V4L2_MPEG_VIDEO_H264_LEVEL_2_2	= 7,
+	V4L2_MPEG_VIDEO_H264_LEVEL_3_0	= 8,
+	V4L2_MPEG_VIDEO_H264_LEVEL_3_1	= 9,
+	V4L2_MPEG_VIDEO_H264_LEVEL_3_2	= 10,
+	V4L2_MPEG_VIDEO_H264_LEVEL_4_0	= 11,
+	V4L2_MPEG_VIDEO_H264_LEVEL_4_1	= 12,
+	V4L2_MPEG_VIDEO_H264_LEVEL_4_2	= 13,
+	V4L2_MPEG_VIDEO_H264_LEVEL_5_0	= 14,
+	V4L2_MPEG_VIDEO_H264_LEVEL_5_1	= 15,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA	(V4L2_CID_MPEG_BASE+360)
+#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA	(V4L2_CID_MPEG_BASE+361)
+#define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_MODE	(V4L2_CID_MPEG_BASE+362)
+enum v4l2_mpeg_video_h264_loop_filter_mode {
+	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_ENABLED				= 0,
+	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED				= 1,
+	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY	= 2,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_PROFILE		(V4L2_CID_MPEG_BASE+363)
+enum v4l2_mpeg_video_h264_profile {
+	V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE			= 0,
+	V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_BASELINE	= 1,
+	V4L2_MPEG_VIDEO_H264_PROFILE_MAIN			= 2,
+	V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED			= 3,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH			= 4,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10			= 5,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422			= 6,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_PREDICTIVE	= 7,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_10_INTRA		= 8,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_422_INTRA		= 9,
+	V4L2_MPEG_VIDEO_H264_PROFILE_HIGH_444_INTRA		= 10,
+	V4L2_MPEG_VIDEO_H264_PROFILE_CAVLC_444_INTRA		= 11,
+	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_BASELINE		= 12,
+	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH		= 13,
+	V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA	= 14,
+	V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH		= 15,
+	V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH		= 16,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT	(V4L2_CID_MPEG_BASE+364)
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH	(V4L2_CID_MPEG_BASE+365)
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE		(V4L2_CID_MPEG_BASE+366)
+#define V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC		(V4L2_CID_MPEG_BASE+367)
+enum v4l2_mpeg_video_h264_vui_sar_idc {
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_UNSPECIFIED	= 0,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_1x1		= 1,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_12x11		= 2,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_10x11		= 3,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_16x11		= 4,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_40x33		= 5,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_24x11		= 6,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_20x11		= 7,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_32x11		= 8,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_80x33		= 9,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_18x11		= 10,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_15x11		= 11,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_64x33		= 12,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_160x99		= 13,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_4x3		= 14,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_3x2		= 15,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1		= 16,
+	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED	= 17,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING		(V4L2_CID_MPEG_BASE+368)
+#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0		(V4L2_CID_MPEG_BASE+369)
+#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE	(V4L2_CID_MPEG_BASE+370)
+enum v4l2_mpeg_video_h264_sei_fp_arrangement_type {
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHECKERBOARD	= 0,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN		= 1,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW		= 2,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE	= 3,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM		= 4,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL		= 5,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_FMO			(V4L2_CID_MPEG_BASE+371)
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE		(V4L2_CID_MPEG_BASE+372)
+enum v4l2_mpeg_video_h264_fmo_map_type {
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES		= 0,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES		= 1,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER	= 2,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT			= 3,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN			= 4,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN			= 5,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT			= 6,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP	(V4L2_CID_MPEG_BASE+373)
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION	(V4L2_CID_MPEG_BASE+374)
+enum v4l2_mpeg_video_h264_fmo_change_dir {
+	V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT	= 0,
+	V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT	= 1,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE	(V4L2_CID_MPEG_BASE+375)
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH		(V4L2_CID_MPEG_BASE+376)
+#define V4L2_CID_MPEG_VIDEO_H264_ASO			(V4L2_CID_MPEG_BASE+377)
+#define V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER	(V4L2_CID_MPEG_BASE+378)
+#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING		(V4L2_CID_MPEG_BASE+379)
+#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE	(V4L2_CID_MPEG_BASE+380)
+enum v4l2_mpeg_video_h264_hierarchical_coding_type {
+	V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B	= 0,
+	V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P	= 1,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER	(V4L2_CID_MPEG_BASE+381)
+#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP	(V4L2_CID_MPEG_BASE+382)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP	(V4L2_CID_MPEG_BASE+400)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP	(V4L2_CID_MPEG_BASE+401)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP	(V4L2_CID_MPEG_BASE+402)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_MIN_QP	(V4L2_CID_MPEG_BASE+403)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_MAX_QP	(V4L2_CID_MPEG_BASE+404)
+#define V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL		(V4L2_CID_MPEG_BASE+405)
+enum v4l2_mpeg_video_mpeg4_level {
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_0	= 0,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_0B	= 1,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_1	= 2,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_2	= 3,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_3	= 4,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_3B	= 5,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_4	= 6,
+	V4L2_MPEG_VIDEO_MPEG4_LEVEL_5	= 7,
+};
+#define V4L2_CID_MPEG_VIDEO_MPEG4_PROFILE	(V4L2_CID_MPEG_BASE+406)
+enum v4l2_mpeg_video_mpeg4_profile {
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE				= 0,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_SIMPLE			= 1,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_CORE				= 2,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE			= 3,
+	V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY	= 4,
+};
+#define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL		(V4L2_CID_MPEG_BASE+407)
+
+/*  Control IDs for VP8 streams
+ *  Although VP8 is not part of MPEG we add these controls to the MPEG class
+ *  as that class is already handling other video compression standards
+ */
+#define V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS		(V4L2_CID_MPEG_BASE+500)
+enum v4l2_vp8_num_partitions {
+	V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION	= 0,
+	V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS	= 1,
+	V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS	= 2,
+	V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS	= 3,
+};
+#define V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4		(V4L2_CID_MPEG_BASE+501)
+#define V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES		(V4L2_CID_MPEG_BASE+502)
+enum v4l2_vp8_num_ref_frames {
+	V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME	= 0,
+	V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME	= 1,
+	V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME	= 2,
+};
+#define V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL		(V4L2_CID_MPEG_BASE+503)
+#define V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS	(V4L2_CID_MPEG_BASE+504)
+#define V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD	(V4L2_CID_MPEG_BASE+505)
+#define V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL	(V4L2_CID_MPEG_BASE+506)
+enum v4l2_vp8_golden_frame_sel {
+	V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV		= 0,
+	V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD	= 1,
+};
+
+/*  MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
+#define V4L2_CID_MPEG_CX2341X_BASE 				(V4L2_CTRL_CLASS_MPEG | 0x1000)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE 	(V4L2_CID_MPEG_CX2341X_BASE+0)
+enum v4l2_mpeg_cx2341x_video_spatial_filter_mode {
+	V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL = 0,
+	V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO   = 1,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER 		(V4L2_CID_MPEG_CX2341X_BASE+1)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE 	(V4L2_CID_MPEG_CX2341X_BASE+2)
+enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type {
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF                  = 0,
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR               = 1,
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_VERT              = 2,
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_HV_SEPARABLE      = 3,
+	V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE = 4,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE 	(V4L2_CID_MPEG_CX2341X_BASE+3)
+enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type {
+	V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF    = 0,
+	V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR = 1,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE 	(V4L2_CID_MPEG_CX2341X_BASE+4)
+enum v4l2_mpeg_cx2341x_video_temporal_filter_mode {
+	V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL = 0,
+	V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO   = 1,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER 		(V4L2_CID_MPEG_CX2341X_BASE+5)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE 		(V4L2_CID_MPEG_CX2341X_BASE+6)
+enum v4l2_mpeg_cx2341x_video_median_filter_type {
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF      = 0,
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR      = 1,
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_VERT     = 2,
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_HOR_VERT = 3,
+	V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG     = 4,
+};
+#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM 	(V4L2_CID_MPEG_CX2341X_BASE+7)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP 	(V4L2_CID_MPEG_CX2341X_BASE+8)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM	(V4L2_CID_MPEG_CX2341X_BASE+9)
+#define V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP 	(V4L2_CID_MPEG_CX2341X_BASE+10)
+#define V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS 	(V4L2_CID_MPEG_CX2341X_BASE+11)
+
+/*  MPEG-class control IDs specific to the Samsung MFC 5.1 driver as defined by V4L2 */
+#define V4L2_CID_MPEG_MFC51_BASE				(V4L2_CTRL_CLASS_MPEG | 0x1100)
+
+#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY		(V4L2_CID_MPEG_MFC51_BASE+0)
+#define V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY_ENABLE	(V4L2_CID_MPEG_MFC51_BASE+1)
+#define V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE			(V4L2_CID_MPEG_MFC51_BASE+2)
+enum v4l2_mpeg_mfc51_video_frame_skip_mode {
+	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED		= 0,
+	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT	= 1,
+	V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT		= 2,
+};
+#define V4L2_CID_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE			(V4L2_CID_MPEG_MFC51_BASE+3)
+enum v4l2_mpeg_mfc51_video_force_frame_type {
+	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_DISABLED		= 0,
+	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME		= 1,
+	V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_NOT_CODED	= 2,
+};
+#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING				(V4L2_CID_MPEG_MFC51_BASE+4)
+#define V4L2_CID_MPEG_MFC51_VIDEO_PADDING_YUV				(V4L2_CID_MPEG_MFC51_BASE+5)
+#define V4L2_CID_MPEG_MFC51_VIDEO_RC_FIXED_TARGET_BIT			(V4L2_CID_MPEG_MFC51_BASE+6)
+#define V4L2_CID_MPEG_MFC51_VIDEO_RC_REACTION_COEFF			(V4L2_CID_MPEG_MFC51_BASE+7)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_ACTIVITY		(V4L2_CID_MPEG_MFC51_BASE+50)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_DARK			(V4L2_CID_MPEG_MFC51_BASE+51)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_SMOOTH		(V4L2_CID_MPEG_MFC51_BASE+52)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_ADAPTIVE_RC_STATIC		(V4L2_CID_MPEG_MFC51_BASE+53)
+#define V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P		(V4L2_CID_MPEG_MFC51_BASE+54)
+
+
+/*  Camera class control IDs */
+
+#define V4L2_CID_CAMERA_CLASS_BASE 	(V4L2_CTRL_CLASS_CAMERA | 0x900)
+#define V4L2_CID_CAMERA_CLASS 		(V4L2_CTRL_CLASS_CAMERA | 1)
+
+#define V4L2_CID_EXPOSURE_AUTO			(V4L2_CID_CAMERA_CLASS_BASE+1)
+enum  v4l2_exposure_auto_type {
+	V4L2_EXPOSURE_AUTO = 0,
+	V4L2_EXPOSURE_MANUAL = 1,
+	V4L2_EXPOSURE_SHUTTER_PRIORITY = 2,
+	V4L2_EXPOSURE_APERTURE_PRIORITY = 3
+};
+#define V4L2_CID_EXPOSURE_ABSOLUTE		(V4L2_CID_CAMERA_CLASS_BASE+2)
+#define V4L2_CID_EXPOSURE_AUTO_PRIORITY		(V4L2_CID_CAMERA_CLASS_BASE+3)
+
+#define V4L2_CID_PAN_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+4)
+#define V4L2_CID_TILT_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+5)
+#define V4L2_CID_PAN_RESET			(V4L2_CID_CAMERA_CLASS_BASE+6)
+#define V4L2_CID_TILT_RESET			(V4L2_CID_CAMERA_CLASS_BASE+7)
+
+#define V4L2_CID_PAN_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+8)
+#define V4L2_CID_TILT_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+9)
+
+#define V4L2_CID_FOCUS_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+10)
+#define V4L2_CID_FOCUS_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+11)
+#define V4L2_CID_FOCUS_AUTO			(V4L2_CID_CAMERA_CLASS_BASE+12)
+
+#define V4L2_CID_ZOOM_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+13)
+#define V4L2_CID_ZOOM_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+14)
+#define V4L2_CID_ZOOM_CONTINUOUS		(V4L2_CID_CAMERA_CLASS_BASE+15)
+
+#define V4L2_CID_PRIVACY			(V4L2_CID_CAMERA_CLASS_BASE+16)
+
+#define V4L2_CID_IRIS_ABSOLUTE			(V4L2_CID_CAMERA_CLASS_BASE+17)
+#define V4L2_CID_IRIS_RELATIVE			(V4L2_CID_CAMERA_CLASS_BASE+18)
+
+#define V4L2_CID_AUTO_EXPOSURE_BIAS		(V4L2_CID_CAMERA_CLASS_BASE+19)
+
+#define V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE	(V4L2_CID_CAMERA_CLASS_BASE+20)
+enum v4l2_auto_n_preset_white_balance {
+	V4L2_WHITE_BALANCE_MANUAL		= 0,
+	V4L2_WHITE_BALANCE_AUTO			= 1,
+	V4L2_WHITE_BALANCE_INCANDESCENT		= 2,
+	V4L2_WHITE_BALANCE_FLUORESCENT		= 3,
+	V4L2_WHITE_BALANCE_FLUORESCENT_H	= 4,
+	V4L2_WHITE_BALANCE_HORIZON		= 5,
+	V4L2_WHITE_BALANCE_DAYLIGHT		= 6,
+	V4L2_WHITE_BALANCE_FLASH		= 7,
+	V4L2_WHITE_BALANCE_CLOUDY		= 8,
+	V4L2_WHITE_BALANCE_SHADE		= 9,
+};
+
+#define V4L2_CID_WIDE_DYNAMIC_RANGE		(V4L2_CID_CAMERA_CLASS_BASE+21)
+#define V4L2_CID_IMAGE_STABILIZATION		(V4L2_CID_CAMERA_CLASS_BASE+22)
+
+#define V4L2_CID_ISO_SENSITIVITY		(V4L2_CID_CAMERA_CLASS_BASE+23)
+#define V4L2_CID_ISO_SENSITIVITY_AUTO		(V4L2_CID_CAMERA_CLASS_BASE+24)
+enum v4l2_iso_sensitivity_auto_type {
+	V4L2_ISO_SENSITIVITY_MANUAL		= 0,
+	V4L2_ISO_SENSITIVITY_AUTO		= 1,
+};
+
+#define V4L2_CID_EXPOSURE_METERING		(V4L2_CID_CAMERA_CLASS_BASE+25)
+enum v4l2_exposure_metering {
+	V4L2_EXPOSURE_METERING_AVERAGE		= 0,
+	V4L2_EXPOSURE_METERING_CENTER_WEIGHTED	= 1,
+	V4L2_EXPOSURE_METERING_SPOT		= 2,
+	V4L2_EXPOSURE_METERING_MATRIX		= 3,
+};
+
+#define V4L2_CID_SCENE_MODE			(V4L2_CID_CAMERA_CLASS_BASE+26)
+enum v4l2_scene_mode {
+	V4L2_SCENE_MODE_NONE			= 0,
+	V4L2_SCENE_MODE_BACKLIGHT		= 1,
+	V4L2_SCENE_MODE_BEACH_SNOW		= 2,
+	V4L2_SCENE_MODE_CANDLE_LIGHT		= 3,
+	V4L2_SCENE_MODE_DAWN_DUSK		= 4,
+	V4L2_SCENE_MODE_FALL_COLORS		= 5,
+	V4L2_SCENE_MODE_FIREWORKS		= 6,
+	V4L2_SCENE_MODE_LANDSCAPE		= 7,
+	V4L2_SCENE_MODE_NIGHT			= 8,
+	V4L2_SCENE_MODE_PARTY_INDOOR		= 9,
+	V4L2_SCENE_MODE_PORTRAIT		= 10,
+	V4L2_SCENE_MODE_SPORTS			= 11,
+	V4L2_SCENE_MODE_SUNSET			= 12,
+	V4L2_SCENE_MODE_TEXT			= 13,
+};
+
+#define V4L2_CID_3A_LOCK			(V4L2_CID_CAMERA_CLASS_BASE+27)
+#define V4L2_LOCK_EXPOSURE			(1 << 0)
+#define V4L2_LOCK_WHITE_BALANCE			(1 << 1)
+#define V4L2_LOCK_FOCUS				(1 << 2)
+
+#define V4L2_CID_AUTO_FOCUS_START		(V4L2_CID_CAMERA_CLASS_BASE+28)
+#define V4L2_CID_AUTO_FOCUS_STOP		(V4L2_CID_CAMERA_CLASS_BASE+29)
+#define V4L2_CID_AUTO_FOCUS_STATUS		(V4L2_CID_CAMERA_CLASS_BASE+30)
+#define V4L2_AUTO_FOCUS_STATUS_IDLE		(0 << 0)
+#define V4L2_AUTO_FOCUS_STATUS_BUSY		(1 << 0)
+#define V4L2_AUTO_FOCUS_STATUS_REACHED		(1 << 1)
+#define V4L2_AUTO_FOCUS_STATUS_FAILED		(1 << 2)
+
+#define V4L2_CID_AUTO_FOCUS_RANGE		(V4L2_CID_CAMERA_CLASS_BASE+31)
+enum v4l2_auto_focus_range {
+	V4L2_AUTO_FOCUS_RANGE_AUTO		= 0,
+	V4L2_AUTO_FOCUS_RANGE_NORMAL		= 1,
+	V4L2_AUTO_FOCUS_RANGE_MACRO		= 2,
+	V4L2_AUTO_FOCUS_RANGE_INFINITY		= 3,
+};
+
+
+/* FM Modulator class control IDs */
+
+#define V4L2_CID_FM_TX_CLASS_BASE		(V4L2_CTRL_CLASS_FM_TX | 0x900)
+#define V4L2_CID_FM_TX_CLASS			(V4L2_CTRL_CLASS_FM_TX | 1)
+
+#define V4L2_CID_RDS_TX_DEVIATION		(V4L2_CID_FM_TX_CLASS_BASE + 1)
+#define V4L2_CID_RDS_TX_PI			(V4L2_CID_FM_TX_CLASS_BASE + 2)
+#define V4L2_CID_RDS_TX_PTY			(V4L2_CID_FM_TX_CLASS_BASE + 3)
+#define V4L2_CID_RDS_TX_PS_NAME			(V4L2_CID_FM_TX_CLASS_BASE + 5)
+#define V4L2_CID_RDS_TX_RADIO_TEXT		(V4L2_CID_FM_TX_CLASS_BASE + 6)
+
+#define V4L2_CID_AUDIO_LIMITER_ENABLED		(V4L2_CID_FM_TX_CLASS_BASE + 64)
+#define V4L2_CID_AUDIO_LIMITER_RELEASE_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 65)
+#define V4L2_CID_AUDIO_LIMITER_DEVIATION	(V4L2_CID_FM_TX_CLASS_BASE + 66)
+
+#define V4L2_CID_AUDIO_COMPRESSION_ENABLED	(V4L2_CID_FM_TX_CLASS_BASE + 80)
+#define V4L2_CID_AUDIO_COMPRESSION_GAIN		(V4L2_CID_FM_TX_CLASS_BASE + 81)
+#define V4L2_CID_AUDIO_COMPRESSION_THRESHOLD	(V4L2_CID_FM_TX_CLASS_BASE + 82)
+#define V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 83)
+#define V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME	(V4L2_CID_FM_TX_CLASS_BASE + 84)
+
+#define V4L2_CID_PILOT_TONE_ENABLED		(V4L2_CID_FM_TX_CLASS_BASE + 96)
+#define V4L2_CID_PILOT_TONE_DEVIATION		(V4L2_CID_FM_TX_CLASS_BASE + 97)
+#define V4L2_CID_PILOT_TONE_FREQUENCY		(V4L2_CID_FM_TX_CLASS_BASE + 98)
+
+#define V4L2_CID_TUNE_PREEMPHASIS		(V4L2_CID_FM_TX_CLASS_BASE + 112)
+enum v4l2_preemphasis {
+	V4L2_PREEMPHASIS_DISABLED	= 0,
+	V4L2_PREEMPHASIS_50_uS		= 1,
+	V4L2_PREEMPHASIS_75_uS		= 2,
+};
+#define V4L2_CID_TUNE_POWER_LEVEL		(V4L2_CID_FM_TX_CLASS_BASE + 113)
+#define V4L2_CID_TUNE_ANTENNA_CAPACITOR		(V4L2_CID_FM_TX_CLASS_BASE + 114)
+
+
+/* Flash and privacy (indicator) light controls */
+
+#define V4L2_CID_FLASH_CLASS_BASE		(V4L2_CTRL_CLASS_FLASH | 0x900)
+#define V4L2_CID_FLASH_CLASS			(V4L2_CTRL_CLASS_FLASH | 1)
+
+#define V4L2_CID_FLASH_LED_MODE			(V4L2_CID_FLASH_CLASS_BASE + 1)
+enum v4l2_flash_led_mode {
+	V4L2_FLASH_LED_MODE_NONE,
+	V4L2_FLASH_LED_MODE_FLASH,
+	V4L2_FLASH_LED_MODE_TORCH,
+};
+
+#define V4L2_CID_FLASH_STROBE_SOURCE		(V4L2_CID_FLASH_CLASS_BASE + 2)
+enum v4l2_flash_strobe_source {
+	V4L2_FLASH_STROBE_SOURCE_SOFTWARE,
+	V4L2_FLASH_STROBE_SOURCE_EXTERNAL,
+};
+
+#define V4L2_CID_FLASH_STROBE			(V4L2_CID_FLASH_CLASS_BASE + 3)
+#define V4L2_CID_FLASH_STROBE_STOP		(V4L2_CID_FLASH_CLASS_BASE + 4)
+#define V4L2_CID_FLASH_STROBE_STATUS		(V4L2_CID_FLASH_CLASS_BASE + 5)
+
+#define V4L2_CID_FLASH_TIMEOUT			(V4L2_CID_FLASH_CLASS_BASE + 6)
+#define V4L2_CID_FLASH_INTENSITY		(V4L2_CID_FLASH_CLASS_BASE + 7)
+#define V4L2_CID_FLASH_TORCH_INTENSITY		(V4L2_CID_FLASH_CLASS_BASE + 8)
+#define V4L2_CID_FLASH_INDICATOR_INTENSITY	(V4L2_CID_FLASH_CLASS_BASE + 9)
+
+#define V4L2_CID_FLASH_FAULT			(V4L2_CID_FLASH_CLASS_BASE + 10)
+#define V4L2_FLASH_FAULT_OVER_VOLTAGE		(1 << 0)
+#define V4L2_FLASH_FAULT_TIMEOUT		(1 << 1)
+#define V4L2_FLASH_FAULT_OVER_TEMPERATURE	(1 << 2)
+#define V4L2_FLASH_FAULT_SHORT_CIRCUIT		(1 << 3)
+#define V4L2_FLASH_FAULT_OVER_CURRENT		(1 << 4)
+#define V4L2_FLASH_FAULT_INDICATOR		(1 << 5)
+
+#define V4L2_CID_FLASH_CHARGE			(V4L2_CID_FLASH_CLASS_BASE + 11)
+#define V4L2_CID_FLASH_READY			(V4L2_CID_FLASH_CLASS_BASE + 12)
+
+
+/* JPEG-class control IDs */
+
+#define V4L2_CID_JPEG_CLASS_BASE		(V4L2_CTRL_CLASS_JPEG | 0x900)
+#define V4L2_CID_JPEG_CLASS			(V4L2_CTRL_CLASS_JPEG | 1)
+
+#define	V4L2_CID_JPEG_CHROMA_SUBSAMPLING	(V4L2_CID_JPEG_CLASS_BASE + 1)
+enum v4l2_jpeg_chroma_subsampling {
+	V4L2_JPEG_CHROMA_SUBSAMPLING_444	= 0,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_422	= 1,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_420	= 2,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_411	= 3,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_410	= 4,
+	V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY	= 5,
+};
+#define	V4L2_CID_JPEG_RESTART_INTERVAL		(V4L2_CID_JPEG_CLASS_BASE + 2)
+#define	V4L2_CID_JPEG_COMPRESSION_QUALITY	(V4L2_CID_JPEG_CLASS_BASE + 3)
+
+#define	V4L2_CID_JPEG_ACTIVE_MARKER		(V4L2_CID_JPEG_CLASS_BASE + 4)
+#define	V4L2_JPEG_ACTIVE_MARKER_APP0		(1 << 0)
+#define	V4L2_JPEG_ACTIVE_MARKER_APP1		(1 << 1)
+#define	V4L2_JPEG_ACTIVE_MARKER_COM		(1 << 16)
+#define	V4L2_JPEG_ACTIVE_MARKER_DQT		(1 << 17)
+#define	V4L2_JPEG_ACTIVE_MARKER_DHT		(1 << 18)
+
+
+/* Image source controls */
+#define V4L2_CID_IMAGE_SOURCE_CLASS_BASE	(V4L2_CTRL_CLASS_IMAGE_SOURCE | 0x900)
+#define V4L2_CID_IMAGE_SOURCE_CLASS		(V4L2_CTRL_CLASS_IMAGE_SOURCE | 1)
+
+#define V4L2_CID_VBLANK				(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 1)
+#define V4L2_CID_HBLANK				(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 2)
+#define V4L2_CID_ANALOGUE_GAIN			(V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 3)
+
+
+/* Image processing controls */
+
+#define V4L2_CID_IMAGE_PROC_CLASS_BASE		(V4L2_CTRL_CLASS_IMAGE_PROC | 0x900)
+#define V4L2_CID_IMAGE_PROC_CLASS		(V4L2_CTRL_CLASS_IMAGE_PROC | 1)
+
+#define V4L2_CID_LINK_FREQ			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 1)
+#define V4L2_CID_PIXEL_RATE			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 2)
+#define V4L2_CID_TEST_PATTERN			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 3)
+
+
+/*  DV-class control IDs defined by V4L2 */
+#define V4L2_CID_DV_CLASS_BASE			(V4L2_CTRL_CLASS_DV | 0x900)
+#define V4L2_CID_DV_CLASS			(V4L2_CTRL_CLASS_DV | 1)
+
+#define	V4L2_CID_DV_TX_HOTPLUG			(V4L2_CID_DV_CLASS_BASE + 1)
+#define	V4L2_CID_DV_TX_RXSENSE			(V4L2_CID_DV_CLASS_BASE + 2)
+#define	V4L2_CID_DV_TX_EDID_PRESENT		(V4L2_CID_DV_CLASS_BASE + 3)
+#define	V4L2_CID_DV_TX_MODE			(V4L2_CID_DV_CLASS_BASE + 4)
+enum v4l2_dv_tx_mode {
+	V4L2_DV_TX_MODE_DVI_D	= 0,
+	V4L2_DV_TX_MODE_HDMI	= 1,
+};
+#define V4L2_CID_DV_TX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 5)
+enum v4l2_dv_rgb_range {
+	V4L2_DV_RGB_RANGE_AUTO	  = 0,
+	V4L2_DV_RGB_RANGE_LIMITED = 1,
+	V4L2_DV_RGB_RANGE_FULL	  = 2,
+};
+
+#define	V4L2_CID_DV_RX_POWER_PRESENT		(V4L2_CID_DV_CLASS_BASE + 100)
+#define V4L2_CID_DV_RX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 101)
+
+#define V4L2_CID_FM_RX_CLASS_BASE		(V4L2_CTRL_CLASS_FM_RX | 0x900)
+#define V4L2_CID_FM_RX_CLASS			(V4L2_CTRL_CLASS_FM_RX | 1)
+
+#define V4L2_CID_TUNE_DEEMPHASIS		(V4L2_CID_FM_RX_CLASS_BASE + 1)
+enum v4l2_deemphasis {
+	V4L2_DEEMPHASIS_DISABLED	= V4L2_PREEMPHASIS_DISABLED,
+	V4L2_DEEMPHASIS_50_uS		= V4L2_PREEMPHASIS_50_uS,
+	V4L2_DEEMPHASIS_75_uS		= V4L2_PREEMPHASIS_75_uS,
+};
+
+#define V4L2_CID_RDS_RECEPTION			(V4L2_CID_FM_RX_CLASS_BASE + 2)
+
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-ctrls.h

@@ -0,0 +1,696 @@
+/*
+    V4L2 controls support header.
+
+    Copyright (C) 2010  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _V4L2_CTRLS_H
+#define _V4L2_CTRLS_H
+#if 0
+#include <linux/list.h>
+#include <linux/mutex.h>
+#endif
+#include "v4l2-osdep.h"
+#include "videodev2.h"
+
+
+/* forward references */
+//struct file;
+struct v4l2_ctrl_handler;
+struct v4l2_ctrl_helper;
+struct v4l2_ctrl;
+struct video_device;
+struct v4l2_subdev;
+struct v4l2_subscribed_event;
+struct v4l2_fh;
+//struct poll_table_struct;
+
+/** struct v4l2_ctrl_ops - The control operations that the driver has to provide.
+  * @g_volatile_ctrl: Get a new value for this control. Generally only relevant
+  *		for volatile (and usually read-only) controls such as a control
+  *		that returns the current signal strength which changes
+  *		continuously.
+  *		If not set, then the currently cached value will be returned.
+  * @try_ctrl:	Test whether the control's value is valid. Only relevant when
+  *		the usual min/max/step checks are not sufficient.
+  * @s_ctrl:	Actually set the new control value. s_ctrl is compulsory. The
+  *		ctrl->handler->lock is held when these ops are called, so no
+  *		one else can access controls owned by that handler.
+  */
+struct v4l2_ctrl_ops {
+	int (*g_volatile_ctrl)(struct v4l2_ctrl *ctrl);
+	int (*try_ctrl)(struct v4l2_ctrl *ctrl);
+	int (*s_ctrl)(struct v4l2_ctrl *ctrl);
+};
+
+typedef void (*v4l2_ctrl_notify_fnc)(struct v4l2_ctrl *ctrl, void *priv);
+
+/** struct v4l2_ctrl - The control structure.
+  * @node:	The list node.
+  * @ev_subs:	The list of control event subscriptions.
+  * @handler:	The handler that owns the control.
+  * @cluster:	Point to start of cluster array.
+  * @ncontrols:	Number of controls in cluster array.
+  * @done:	Internal flag: set for each processed control.
+  * @is_new:	Set when the user specified a new value for this control. It
+  *		is also set when called from v4l2_ctrl_handler_setup. Drivers
+  *		should never set this flag.
+  * @is_private: If set, then this control is private to its handler and it
+  *		will not be added to any other handlers. Drivers can set
+  *		this flag.
+  * @is_auto:   If set, then this control selects whether the other cluster
+  *		members are in 'automatic' mode or 'manual' mode. This is
+  *		used for autogain/gain type clusters. Drivers should never
+  *		set this flag directly.
+  * @has_volatiles: If set, then one or more members of the cluster are volatile.
+  *		Drivers should never touch this flag.
+  * @call_notify: If set, then call the handler's notify function whenever the
+  *		control's value changes.
+  * @manual_mode_value: If the is_auto flag is set, then this is the value
+  *		of the auto control that determines if that control is in
+  *		manual mode. So if the value of the auto control equals this
+  *		value, then the whole cluster is in manual mode. Drivers should
+  *		never set this flag directly.
+  * @ops:	The control ops.
+  * @id:	The control ID.
+  * @name:	The control name.
+  * @type:	The control type.
+  * @minimum:	The control's minimum value.
+  * @maximum:	The control's maximum value.
+  * @default_value: The control's default value.
+  * @step:	The control's step value for non-menu controls.
+  * @menu_skip_mask: The control's skip mask for menu controls. This makes it
+  *		easy to skip menu items that are not valid. If bit X is set,
+  *		then menu item X is skipped. Of course, this only works for
+  *		menus with <= 32 menu items. There are no menus that come
+  *		close to that number, so this is OK. Should we ever need more,
+  *		then this will have to be extended to a u64 or a bit array.
+  * @qmenu:	A const char * array for all menu items. Array entries that are
+  *		empty strings ("") correspond to non-existing menu items (this
+  *		is in addition to the menu_skip_mask above). The last entry
+  *		must be NULL.
+  * @flags:	The control's flags.
+  * @cur:	The control's current value.
+  * @val:	The control's new s32 value.
+  * @val64:	The control's new s64 value.
+  * @string:	The control's new string value.
+  * @priv:	The control's private pointer. For use by the driver. It is
+  *		untouched by the control framework. Note that this pointer is
+  *		not freed when the control is deleted. Should this be needed
+  *		then a new internal bitfield can be added to tell the framework
+  *		to free this pointer.
+  */
+struct v4l2_ctrl {
+	/* Administrative fields */
+	struct list_head node;
+	struct list_head ev_subs;
+	struct v4l2_ctrl_handler *handler;
+	struct v4l2_ctrl **cluster;
+	unsigned ncontrols;
+	unsigned int done:1;
+
+	unsigned int is_new:1;
+	unsigned int is_private:1;
+	unsigned int is_auto:1;
+	unsigned int has_volatiles:1;
+	unsigned int call_notify:1;
+	unsigned int manual_mode_value:8;
+
+	const struct v4l2_ctrl_ops *ops;
+	u32 id;
+	const char *name;
+	enum v4l2_ctrl_type type;
+	s32 minimum, maximum, default_value;
+	union {
+		u32 step;
+		u32 menu_skip_mask;
+	};
+	union {
+		const char * const *qmenu;
+		const s64 *qmenu_int;
+	};
+	unsigned long flags;
+	union {
+		s32 val;
+		s64 val64;
+		char *string;
+	} cur;
+	union {
+		s32 val;
+		s64 val64;
+		char *string;
+	};
+	void *priv;
+};
+
+/** struct v4l2_ctrl_ref - The control reference.
+  * @node:	List node for the sorted list.
+  * @next:	Single-link list node for the hash.
+  * @ctrl:	The actual control information.
+  * @helper:	Pointer to helper struct. Used internally in prepare_ext_ctrls().
+  *
+  * Each control handler has a list of these refs. The list_head is used to
+  * keep a sorted-by-control-ID list of all controls, while the next pointer
+  * is used to link the control in the hash's bucket.
+  */
+struct v4l2_ctrl_ref {
+	struct list_head node;
+	struct v4l2_ctrl_ref *next;
+	struct v4l2_ctrl *ctrl;
+	struct v4l2_ctrl_helper *helper;
+};
+
+/** struct v4l2_ctrl_handler - The control handler keeps track of all the
+  * controls: both the controls owned by the handler and those inherited
+  * from other handlers.
+  * @_lock:	Default for "lock".
+  * @lock:	Lock to control access to this handler and its controls.
+  *		May be replaced by the user right after init.
+  * @ctrls:	The list of controls owned by this handler.
+  * @ctrl_refs:	The list of control references.
+  * @cached:	The last found control reference. It is common that the same
+  *		control is needed multiple times, so this is a simple
+  *		optimization.
+  * @buckets:	Buckets for the hashing. Allows for quick control lookup.
+  * @notify:	A notify callback that is called whenever the control changes value.
+  *		Note that the handler's lock is held when the notify function
+  *		is called!
+  * @notify_priv: Passed as argument to the v4l2_ctrl notify callback.
+  * @nr_of_buckets: Total number of buckets in the array.
+  * @error:	The error code of the first failed control addition.
+  */
+struct v4l2_ctrl_handler {
+	//struct mutex _lock;
+	//struct mutex *lock;
+	_Mutex	_lock;
+	_Mutex	*lock;
+	struct list_head ctrls;
+	struct list_head ctrl_refs;
+	struct v4l2_ctrl_ref *cached;
+	struct v4l2_ctrl_ref **buckets;
+	v4l2_ctrl_notify_fnc notify;
+	void *notify_priv;
+	u16 nr_of_buckets;
+	int error;
+};
+
+/** struct v4l2_ctrl_config - Control configuration structure.
+  * @ops:	The control ops.
+  * @id:	The control ID.
+  * @name:	The control name.
+  * @type:	The control type.
+  * @min:	The control's minimum value.
+  * @max:	The control's maximum value.
+  * @step:	The control's step value for non-menu controls.
+  * @def: 	The control's default value.
+  * @flags:	The control's flags.
+  * @menu_skip_mask: The control's skip mask for menu controls. This makes it
+  *		easy to skip menu items that are not valid. If bit X is set,
+  *		then menu item X is skipped. Of course, this only works for
+  *		menus with <= 32 menu items. There are no menus that come
+  *		close to that number, so this is OK. Should we ever need more,
+  *		then this will have to be extended to a u64 or a bit array.
+  * @qmenu:	A const char * array for all menu items. Array entries that are
+  *		empty strings ("") correspond to non-existing menu items (this
+  *		is in addition to the menu_skip_mask above). The last entry
+  *		must be NULL.
+  * @is_private: If set, then this control is private to its handler and it
+  *		will not be added to any other handlers.
+  */
+struct v4l2_ctrl_config {
+	const struct v4l2_ctrl_ops *ops;
+	u32 id;
+	const char *name;
+	enum v4l2_ctrl_type type;
+	s32 min;
+	s32 max;
+	u32 step;
+	s32 def;
+	u32 flags;
+	u32 menu_skip_mask;
+	const char * const *qmenu;
+	const s64 *qmenu_int;
+	unsigned int is_private:1;
+};
+
+/** v4l2_ctrl_fill() - Fill in the control fields based on the control ID.
+  *
+  * This works for all standard V4L2 controls.
+  * For non-standard controls it will only fill in the given arguments
+  * and @name will be NULL.
+  *
+  * This function will overwrite the contents of @name, @type and @flags.
+  * The contents of @min, @max, @step and @def may be modified depending on
+  * the type.
+  *
+  * Do not use in drivers! It is used internally for backwards compatibility
+  * control handling only. Once all drivers are converted to use the new
+  * control framework this function will no longer be exported.
+  */
+void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
+		    s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags);
+
+
+/** v4l2_ctrl_handler_init_class() - Initialize the control handler.
+  * @hdl:	The control handler.
+  * @nr_of_controls_hint: A hint of how many controls this handler is
+  *		expected to refer to. This is the total number, so including
+  *		any inherited controls. It doesn't have to be precise, but if
+  *		it is way off, then you either waste memory (too many buckets
+  *		are allocated) or the control lookup becomes slower (not enough
+  *		buckets are allocated, so there are more slow list lookups).
+  *		It will always work, though.
+  * @key:	Used by the lock validator if CONFIG_LOCKDEP is set.
+  * @name:	Used by the lock validator if CONFIG_LOCKDEP is set.
+  *
+  * Returns an error if the buckets could not be allocated. This error will
+  * also be stored in @hdl->error.
+  *
+  * Never use this call directly, always use the v4l2_ctrl_handler_init
+  * macro that hides the @key and @name arguments.
+  */
+#if 0  
+int v4l2_ctrl_handler_init_class(struct v4l2_ctrl_handler *hdl,
+				 unsigned nr_of_controls_hint,
+				 struct lock_class_key *key, const char *name);
+
+#ifdef CONFIG_LOCKDEP
+#define v4l2_ctrl_handler_init(hdl, nr_of_controls_hint)		\
+(									\
+	({								\
+		static struct lock_class_key _key;			\
+		v4l2_ctrl_handler_init_class(hdl, nr_of_controls_hint,	\
+					&_key,				\
+					KBUILD_BASENAME ":"		\
+					__stringify(__LINE__) ":"	\
+					"(" #hdl ")->_lock");		\
+	})								\
+)
+#else
+#define v4l2_ctrl_handler_init(hdl, nr_of_controls_hint)		\
+	v4l2_ctrl_handler_init_class(hdl, nr_of_controls_hint, NULL, NULL)
+#endif
+#endif
+
+/** v4l2_ctrl_handler_free() - Free all controls owned by the handler and free
+  * the control list.
+  * @hdl:	The control handler.
+  *
+  * Does nothing if @hdl == NULL.
+  */
+void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl);
+
+/** v4l2_ctrl_handler_setup() - Call the s_ctrl op for all controls belonging
+  * to the handler to initialize the hardware to the current control values.
+  * @hdl:	The control handler.
+  *
+  * Button controls will be skipped, as are read-only controls.
+  *
+  * If @hdl == NULL, then this just returns 0.
+  */
+int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl);
+
+/** v4l2_ctrl_handler_log_status() - Log all controls owned by the handler.
+  * @hdl:	The control handler.
+  * @prefix:	The prefix to use when logging the control values. If the
+  *		prefix does not end with a space, then ": " will be added
+  *		after the prefix. If @prefix == NULL, then no prefix will be
+  *		used.
+  *
+  * For use with VIDIOC_LOG_STATUS.
+  *
+  * Does nothing if @hdl == NULL.
+  */
+void v4l2_ctrl_handler_log_status(struct v4l2_ctrl_handler *hdl,
+				  const char *prefix);
+
+/** v4l2_ctrl_new_custom() - Allocate and initialize a new custom V4L2
+  * control.
+  * @hdl:	The control handler.
+  * @cfg:	The control's configuration data.
+  * @priv:	The control's driver-specific private data.
+  *
+  * If the &v4l2_ctrl struct could not be allocated then NULL is returned
+  * and @hdl->error is set to the error code (if it wasn't set already).
+  */
+struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_config *cfg, void *priv);
+
+/** v4l2_ctrl_new_std() - Allocate and initialize a new standard V4L2 non-menu control.
+  * @hdl:	The control handler.
+  * @ops:	The control ops.
+  * @id:	The control ID.
+  * @min:	The control's minimum value.
+  * @max:	The control's maximum value.
+  * @step:	The control's step value
+  * @def: 	The control's default value.
+  *
+  * If the &v4l2_ctrl struct could not be allocated, or the control
+  * ID is not known, then NULL is returned and @hdl->error is set to the
+  * appropriate error code (if it wasn't set already).
+  *
+  * If @id refers to a menu control, then this function will return NULL.
+  *
+  * Use v4l2_ctrl_new_std_menu() when adding menu controls.
+  */
+struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 min, s32 max, u32 step, s32 def);
+
+/** v4l2_ctrl_new_std_menu() - Allocate and initialize a new standard V4L2 menu control.
+  * @hdl:	The control handler.
+  * @ops:	The control ops.
+  * @id:	The control ID.
+  * @max:	The control's maximum value.
+  * @mask: 	The control's skip mask for menu controls. This makes it
+  *		easy to skip menu items that are not valid. If bit X is set,
+  *		then menu item X is skipped. Of course, this only works for
+  *		menus with <= 32 menu items. There are no menus that come
+  *		close to that number, so this is OK. Should we ever need more,
+  *		then this will have to be extended to a u64 or a bit array.
+  * @def: 	The control's default value.
+  *
+  * Same as v4l2_ctrl_new_std(), but @min is set to 0 and the @mask value
+  * determines which menu items are to be skipped.
+  *
+  * If @id refers to a non-menu control, then this function will return NULL.
+  */
+struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 max, s32 mask, s32 def);
+
+/** v4l2_ctrl_new_std_menu_items() - Create a new standard V4L2 menu control
+  * with driver specific menu.
+  * @hdl:	The control handler.
+  * @ops:	The control ops.
+  * @id:	The control ID.
+  * @max:	The control's maximum value.
+  * @mask:	The control's skip mask for menu controls. This makes it
+  *		easy to skip menu items that are not valid. If bit X is set,
+  *		then menu item X is skipped. Of course, this only works for
+  *		menus with <= 32 menu items. There are no menus that come
+  *		close to that number, so this is OK. Should we ever need more,
+  *		then this will have to be extended to a u64 or a bit array.
+  * @def:	The control's default value.
+  * @qmenu:	The new menu.
+  *
+  * Same as v4l2_ctrl_new_std_menu(), but @qmenu will be the driver specific
+  * menu of this control.
+  *
+  */
+struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops, u32 id, s32 max,
+			s32 mask, s32 def, const char * const *qmenu);
+
+/** v4l2_ctrl_new_int_menu() - Create a new standard V4L2 integer menu control.
+  * @hdl:	The control handler.
+  * @ops:	The control ops.
+  * @id:	The control ID.
+  * @max:	The control's maximum value.
+  * @def:	The control's default value.
+  * @qmenu_int:	The control's menu entries.
+  *
+  * Same as v4l2_ctrl_new_std_menu(), but @mask is set to 0 and it additionaly
+  * takes as an argument an array of integers determining the menu items.
+  *
+  * If @id refers to a non-integer-menu control, then this function will return NULL.
+  */
+struct v4l2_ctrl *v4l2_ctrl_new_int_menu(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 max, s32 def, const s64 *qmenu_int);
+
+/** v4l2_ctrl_add_ctrl() - Add a control from another handler to this handler.
+  * @hdl:	The control handler.
+  * @ctrl:	The control to add.
+  *
+  * It will return NULL if it was unable to add the control reference.
+  * If the control already belonged to the handler, then it will do
+  * nothing and just return @ctrl.
+  */
+struct v4l2_ctrl *v4l2_ctrl_add_ctrl(struct v4l2_ctrl_handler *hdl,
+					  struct v4l2_ctrl *ctrl);
+
+/** v4l2_ctrl_add_handler() - Add all controls from handler @add to
+  * handler @hdl.
+  * @hdl:	The control handler.
+  * @add:	The control handler whose controls you want to add to
+  *		the @hdl control handler.
+  * @filter:	This function will filter which controls should be added.
+  *
+  * Does nothing if either of the two handlers is a NULL pointer.
+  * If @filter is NULL, then all controls are added. Otherwise only those
+  * controls for which @filter returns true will be added.
+  * In case of an error @hdl->error will be set to the error code (if it
+  * wasn't set already).
+  */
+int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
+			  struct v4l2_ctrl_handler *add,
+			  bool (*filter)(const struct v4l2_ctrl *ctrl));
+
+/** v4l2_ctrl_radio_filter() - Standard filter for radio controls.
+  * @ctrl:	The control that is filtered.
+  *
+  * This will return true for any controls that are valid for radio device
+  * nodes. Those are all of the V4L2_CID_AUDIO_* user controls and all FM
+  * transmitter class controls.
+  *
+  * This function is to be used with v4l2_ctrl_add_handler().
+  */
+bool v4l2_ctrl_radio_filter(const struct v4l2_ctrl *ctrl);
+
+/** v4l2_ctrl_cluster() - Mark all controls in the cluster as belonging to that cluster.
+  * @ncontrols:	The number of controls in this cluster.
+  * @controls: 	The cluster control array of size @ncontrols.
+  */
+void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls);
+
+
+/** v4l2_ctrl_auto_cluster() - Mark all controls in the cluster as belonging to
+  * that cluster and set it up for autofoo/foo-type handling.
+  * @ncontrols:	The number of controls in this cluster.
+  * @controls:	The cluster control array of size @ncontrols. The first control
+  *		must be the 'auto' control (e.g. autogain, autoexposure, etc.)
+  * @manual_val: The value for the first control in the cluster that equals the
+  *		manual setting.
+  * @set_volatile: If true, then all controls except the first auto control will
+  *		be volatile.
+  *
+  * Use for control groups where one control selects some automatic feature and
+  * the other controls are only active whenever the automatic feature is turned
+  * off (manual mode). Typical examples: autogain vs gain, auto-whitebalance vs
+  * red and blue balance, etc.
+  *
+  * The behavior of such controls is as follows:
+  *
+  * When the autofoo control is set to automatic, then any manual controls
+  * are set to inactive and any reads will call g_volatile_ctrl (if the control
+  * was marked volatile).
+  *
+  * When the autofoo control is set to manual, then any manual controls will
+  * be marked active, and any reads will just return the current value without
+  * going through g_volatile_ctrl.
+  *
+  * In addition, this function will set the V4L2_CTRL_FLAG_UPDATE flag
+  * on the autofoo control and V4L2_CTRL_FLAG_INACTIVE on the foo control(s)
+  * if autofoo is in auto mode.
+  */
+void v4l2_ctrl_auto_cluster(unsigned ncontrols, struct v4l2_ctrl **controls,
+			u8 manual_val, bool set_volatile);
+
+
+/** v4l2_ctrl_find() - Find a control with the given ID.
+  * @hdl:	The control handler.
+  * @id:	The control ID to find.
+  *
+  * If @hdl == NULL this will return NULL as well. Will lock the handler so
+  * do not use from inside &v4l2_ctrl_ops.
+  */
+struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id);
+
+/** v4l2_ctrl_activate() - Make the control active or inactive.
+  * @ctrl:	The control to (de)activate.
+  * @active:	True if the control should become active.
+  *
+  * This sets or clears the V4L2_CTRL_FLAG_INACTIVE flag atomically.
+  * Does nothing if @ctrl == NULL.
+  * This will usually be called from within the s_ctrl op.
+  * The V4L2_EVENT_CTRL event will be generated afterwards.
+  *
+  * This function assumes that the control handler is locked.
+  */
+void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active);
+
+/** v4l2_ctrl_grab() - Mark the control as grabbed or not grabbed.
+  * @ctrl:	The control to (de)activate.
+  * @grabbed:	True if the control should become grabbed.
+  *
+  * This sets or clears the V4L2_CTRL_FLAG_GRABBED flag atomically.
+  * Does nothing if @ctrl == NULL.
+  * The V4L2_EVENT_CTRL event will be generated afterwards.
+  * This will usually be called when starting or stopping streaming in the
+  * driver.
+  *
+  * This function assumes that the control handler is not locked and will
+  * take the lock itself.
+  */
+void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed);
+
+/** v4l2_ctrl_modify_range() - Update the range of a control.
+  * @ctrl:	The control to update.
+  * @min:	The control's minimum value.
+  * @max:	The control's maximum value.
+  * @step:	The control's step value
+  * @def:	The control's default value.
+  *
+  * Update the range of a control on the fly. This works for control types
+  * INTEGER, BOOLEAN, MENU, INTEGER MENU and BITMASK. For menu controls the
+  * @step value is interpreted as a menu_skip_mask.
+  *
+  * An error is returned if one of the range arguments is invalid for this
+  * control type.
+  *
+  * This function assumes that the control handler is not locked and will
+  * take the lock itself.
+  */
+int v4l2_ctrl_modify_range(struct v4l2_ctrl *ctrl,
+			s32 min, s32 max, u32 step, s32 def);
+
+/** v4l2_ctrl_lock() - Helper function to lock the handler
+  * associated with the control.
+  * @ctrl:	The control to lock.
+  */
+static inline void v4l2_ctrl_lock(struct v4l2_ctrl *ctrl)
+{
+	mutex_lock(ctrl->handler->lock);
+}
+
+/** v4l2_ctrl_lock() - Helper function to unlock the handler
+  * associated with the control.
+  * @ctrl:	The control to unlock.
+  */
+static inline void v4l2_ctrl_unlock(struct v4l2_ctrl *ctrl)
+{
+	mutex_unlock(ctrl->handler->lock);
+}
+
+/** v4l2_ctrl_notify() - Function to set a notify callback for a control.
+  * @ctrl:	The control.
+  * @notify:	The callback function.
+  * @priv:	The callback private handle, passed as argument to the callback.
+  *
+  * This function sets a callback function for the control. If @ctrl is NULL,
+  * then it will do nothing. If @notify is NULL, then the notify callback will
+  * be removed.
+  *
+  * There can be only one notify. If another already exists, then a WARN_ON
+  * will be issued and the function will do nothing.
+  */
+void v4l2_ctrl_notify(struct v4l2_ctrl *ctrl, v4l2_ctrl_notify_fnc notify, void *priv);
+
+/** v4l2_ctrl_g_ctrl() - Helper function to get the control's value from within a driver.
+  * @ctrl:	The control.
+  *
+  * This returns the control's value safely by going through the control
+  * framework. This function will lock the control's handler, so it cannot be
+  * used from within the &v4l2_ctrl_ops functions.
+  *
+  * This function is for integer type controls only.
+  */
+s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
+
+/** v4l2_ctrl_s_ctrl() - Helper function to set the control's value from within a driver.
+  * @ctrl:	The control.
+  * @val:	The new value.
+  *
+  * This set the control's new value safely by going through the control
+  * framework. This function will lock the control's handler, so it cannot be
+  * used from within the &v4l2_ctrl_ops functions.
+  *
+  * This function is for integer type controls only.
+  */
+int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
+
+/** v4l2_ctrl_g_ctrl_int64() - Helper function to get a 64-bit control's value from within a driver.
+  * @ctrl:	The control.
+  *
+  * This returns the control's value safely by going through the control
+  * framework. This function will lock the control's handler, so it cannot be
+  * used from within the &v4l2_ctrl_ops functions.
+  *
+  * This function is for 64-bit integer type controls only.
+  */
+s64 v4l2_ctrl_g_ctrl_int64(struct v4l2_ctrl *ctrl);
+
+/** v4l2_ctrl_s_ctrl_int64() - Helper function to set a 64-bit control's value from within a driver.
+  * @ctrl:	The control.
+  * @val:	The new value.
+  *
+  * This set the control's new value safely by going through the control
+  * framework. This function will lock the control's handler, so it cannot be
+  * used from within the &v4l2_ctrl_ops functions.
+  *
+  * This function is for 64-bit integer type controls only.
+  */
+int v4l2_ctrl_s_ctrl_int64(struct v4l2_ctrl *ctrl, s64 val);
+
+/* Internal helper functions that deal with control events. */
+extern const struct v4l2_subscribed_event_ops v4l2_ctrl_sub_ev_ops;
+void v4l2_ctrl_replace(struct v4l2_event *old, const struct v4l2_event *new);
+void v4l2_ctrl_merge(const struct v4l2_event *old, struct v4l2_event *new);
+
+/* Can be used as a vidioc_log_status function that just dumps all controls
+   associated with the filehandle. */
+int v4l2_ctrl_log_status(void *fh);
+
+/* Can be used as a vidioc_subscribe_event function that just subscribes
+   control events. */
+int v4l2_ctrl_subscribe_event(struct v4l2_fh *fh,
+				const struct v4l2_event_subscription *sub);
+
+/* Can be used as a poll function that just polls for control events. */
+//unsigned int v4l2_ctrl_poll(struct file *file, struct poll_table_struct *wait);
+
+/* Helpers for ioctl_ops. If hdl == NULL then they will all return -EINVAL. */
+int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc);
+int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm);
+int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl);
+int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
+						struct v4l2_control *ctrl);
+int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
+int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *c);
+int v4l2_s_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl,
+						struct v4l2_ext_controls *c);
+
+/* Helpers for subdevices. If the associated ctrl_handler == NULL then they
+   will all return -EINVAL. */
+int v4l2_subdev_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
+int v4l2_subdev_querymenu(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
+int v4l2_subdev_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs);
+int v4l2_subdev_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs);
+int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs);
+int v4l2_subdev_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+int v4l2_subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+
+/* Can be used as a subscribe_event function that just subscribes control
+   events. */
+int v4l2_ctrl_subdev_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+				     struct v4l2_event_subscription *sub);
+
+/* Log all controls owned by subdev's control handler. */
+int v4l2_ctrl_subdev_log_status(struct v4l2_subdev *sd);
+
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-dev.h

@@ -0,0 +1,273 @@
+/*
+ *
+ *	V 4 L 2   D R I V E R   H E L P E R   A P I
+ *
+ * Moved from videodev2.h
+ *
+ *	Some commonly needed functions for drivers (v4l2-common.o module)
+ */
+#ifndef _V4L2_DEV_H
+#define _V4L2_DEV_H
+#if 0
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+#include <linux/mutex.h>
+#endif
+#include "v4l2-osdep.h"
+#include "uapi_videodev2.h"
+#include "media-entity.h"
+
+
+#define VIDEO_MAJOR	81
+
+#define VFL_TYPE_GRABBER	0
+#define VFL_TYPE_VBI		1
+#define VFL_TYPE_RADIO		2
+#define VFL_TYPE_SUBDEV		3
+#define VFL_TYPE_MAX		4
+
+/* Is this a receiver, transmitter or mem-to-mem? */
+/* Ignored for VFL_TYPE_SUBDEV. */
+#define VFL_DIR_RX		0
+#define VFL_DIR_TX		1
+#define VFL_DIR_M2M		2
+
+//struct v4l2_ioctl_callbacks; // can't find out from the kernel source code
+struct video_device;
+struct v4l2_device;
+struct v4l2_ctrl_handler;
+enum v4l2_priority;
+/* Flag to mark the video_device struct as registered.
+   Drivers can clear this flag if they want to block all future
+   device access. It is cleared by video_unregister_device. */
+#define V4L2_FL_REGISTERED	(0)
+/* file->private_data points to struct v4l2_fh */
+#define V4L2_FL_USES_V4L2_FH	(1)
+/* Use the prio field of v4l2_fh for core priority checking */
+#define V4L2_FL_USE_FH_PRIO	(2)
+
+/* Priority helper functions */
+
+struct v4l2_prio_state {
+	atomic_t prios[4];
+};
+
+/* 
+enum v4l2_priority { 
+    V4L2_PRIORITY_UNSET       = 0,  // 不初始化 
+    V4L2_PRIORITY_BACKGROUND  = 1,  // 背景 
+    V4L2_PRIORITY_INTERACTIVE = 2,  // 互動 
+    V4L2_PRIORITY_RECORD      = 3,  // 紀錄
+    V4L2_PRIORITY_DEFAULT     = V4L2_PRIORITY_INTERACTIVE, 
+}; 
+优先權是為了Multiple Opens操作，當可以支持device同時被多個thread 打開(i.e open())
+需要用這優先權去區分哪個操作更重要，使用的那個優先級別，的prios[4]就加一。
+*/ 
+
+void v4l2_prio_init(struct v4l2_prio_state *global);
+int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local,
+		     enum v4l2_priority new);
+void v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local);
+void v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority local);
+enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global);
+int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority local);
+
+
+struct v4l2_file_operations {
+	   //struct module *owner;
+	   //ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
+	   //ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
+	   //unsigned int (*poll) (struct file *, struct poll_table_struct *);
+	   long (*ioctl) (unsigned int, unsigned long);
+	   long (*unlocked_ioctl) (unsigned int, unsigned long);
+#ifdef CONFIG_COMPAT
+	   long (*compat_ioctl32) (unsigned int, unsigned long);
+#endif
+	   //unsigned long (*get_unmapped_area) (struct file *, unsigned long,
+	   //					   unsigned long, unsigned long, unsigned long);
+	   int (*mmap) ();
+	   int (*open) ();
+	   int (*release) ();
+};
+
+
+
+/*
+ * Newer version of video_device, handled by videodev2.c
+ * 	This version moves redundant code from video device code to
+ *	the common handler
+ */
+
+struct video_device
+{
+#if defined(CONFIG_MEDIA_CONTROLLER)
+	struct media_entity entity;
+#endif
+	/* device ops */
+	const struct v4l2_file_operations *fops;
+
+	/* sysfs */
+	//struct device dev;		/* v4l device,this is mainlt for sysfs */
+	unsigned long dev; 		/* replace to the reference count */
+	void *dev_driver_data;
+	const char *init_name; 		/* initial name of the device */
+	void (*dev_release)();	/* release call back in origonal dev */
+	
+	//struct cdev *cdev;		/* character device, which video device register */
+	//struct file_operations	*cdev_ops;/* file_operations in origonal cdev */
+
+	struct v4l2_device *v4l2_dev;	/* v4l2_device parent */
+	/* Only set parent if that can't be deduced from v4l2_dev */
+	//struct device *dev_parent;	/* device parent */
+
+	/* Control handler associated with this device node. May be NULL. 
+	 * look up v4l2_ctrls.h for more detail */
+	struct v4l2_ctrl_handler *ctrl_handler;
+
+	/* vb2_queue associated with this device node. May be NULL. */
+	struct vb2_queue *queue;
+
+	/* Priority state. If NULL, then v4l2_dev->prio will be used. */
+	struct v4l2_prio_state *prio;
+
+	/* device info */
+	char name[32];
+	int vfl_type;	/* device type,usally assign the define VFL_TYPE_XXX value */
+	int vfl_dir;	/* receiver, transmitter or m2m,usally assign the define VFL_DIR_XXX value */
+	/* 'minor' is set to -1 if the registration failed */
+	int minor;
+	u16 num;	/* record the registered video device node number */
+	/* use bitops to set/clear/test flags,usally assign the define VFL_FL_XXX value */
+	unsigned long flags;
+	/* attribute to differentiate multiple indices on one physical device */
+	int index;
+
+	/* V4L2 file handles */
+	//spinlock_t		fh_lock; /* Lock for all v4l2_fhs */
+	_Lock			fh_lock;
+	struct list_head	fh_list; /* List of struct v4l2_fh */
+	int debug;			/* Activates debug level*/
+
+	/* Video standard vars (v4l2_std_id = u64)*/
+	//v4l2_std_id tvnorms;		/* Supported tv norms,usally assign the define VFL_STD_XXX value */
+	u64 tvnorms;
+
+	/* callbacks,this must non-NULL,in usually use the video_device_release()to replace of */
+	void (*release)(struct video_device *vdev);
+
+	/* ioctl callbacks,look up v4l2-ioctl.h for more detail */
+	const struct v4l2_ioctl_ops *ioctl_ops;
+	//DECLARE_BITMAP(valid_ioctls, BASE_VIDIOC_PRIVATE); /* unsigned long valid_ioctls[6] */
+	unsigned long valid_ioctls[6];
+	/* serialization lock */
+	//DECLARE_BITMAP(disable_locking, BASE_VIDIOC_PRIVATE); /* unsigned long disable_locking[6] */
+	unsigned long disable_locking[6];
+	//struct mutex *lock;	/* make serilized ioctl lock possible */
+	_Mutex	*lock;
+};
+
+/* todo need to modify */
+#if 0
+#define media_entity_to_video_device(__e) \
+	container_of(__e, struct video_device, entity)
+
+/* dev to video-device */
+#define to_video_device(cd) container_of(cd, struct video_device, dev)
+#endif
+
+int __video_register_device(struct video_device *vdev, int type,
+		int nr, int warn_if_nr_in_use/*, struct module *owner*/);
+
+/* Register video devices. Note that if video_register_device fails,
+   the release() callback of the video_device structure is *not* called, so
+   the caller is responsible for freeing any data. Usually that means that
+   you call video_device_release() on failure. */
+static inline int video_register_device(struct video_device *vdev,
+		int type, int nr)
+{
+	// type = VFL_TYPE_GRABBER, nr = -1, 1, "THIS_MODULE"
+	return __video_register_device(vdev, type, nr, 1/*, vdev->fops->owner*/);
+}
+
+/* Same as video_register_device, but no warning is issued if the desired
+   device node number was already in use. */
+static inline int video_register_device_no_warn(
+		struct video_device *vdev, int type, int nr)
+{
+	return __video_register_device(vdev, type, nr, 0/*, vdev->fops->owner*/);
+}
+
+/* Unregister video devices. Will do nothing if vdev == NULL or
+   video_is_registered() returns false. */
+void video_unregister_device(struct video_device *vdev);
+
+/* helper functions to alloc/release struct video_device, the
+   latter can also be used for video_device->release(). */
+struct video_device *video_device_alloc(void);
+
+/* this release function frees the vdev pointer */
+void video_device_release(struct video_device *vdev);
+
+/* this release function does nothing, use when the video_device is a
+   static global struct. Note that having a static video_device is
+   a dubious construction at best. */
+void video_device_release_empty(struct video_device *vdev);
+
+/* returns true if cmd is a known V4L2 ioctl */
+bool v4l2_is_known_ioctl(unsigned int cmd);
+
+/* mark that this command shouldn't use core locking */
+static inline void v4l2_disable_ioctl_locking(struct video_device *vdev, unsigned int cmd)
+{
+	#define BASE_VIDIOC_PRIVATE 192
+	if (_IOC_NR(cmd) < BASE_VIDIOC_PRIVATE)
+		set_bit(_IOC_NR(cmd), vdev->disable_locking);
+}
+
+/* Mark that this command isn't implemented. This must be called before
+   video_device_register. See also the comments in determine_valid_ioctls().
+   This function allows drivers to provide just one v4l2_ioctl_ops struct, but
+   disable ioctls based on the specific card that is actually found. */
+static inline void v4l2_disable_ioctl(struct video_device *vdev, unsigned int cmd)
+{
+	#define BASE_VIDIOC_PRIVATE 192
+	if (_IOC_NR(cmd) < BASE_VIDIOC_PRIVATE)
+		set_bit(_IOC_NR(cmd), vdev->valid_ioctls);
+}
+
+/* helper functions to access driver private data. */
+static inline void *video_get_drvdata(struct video_device *vdev)
+{
+	//return dev_get_drvdata(&vdev->dev);
+	return (vdev->dev_driver_data);
+}
+
+static inline void video_set_drvdata(struct video_device *vdev, void *data)
+{
+	//dev_set_drvdata(&vdev->dev, data);
+	vdev->dev_driver_data = data;
+}
+
+struct video_device *video_devdata();
+
+/* Combine video_get_drvdata and video_devdata as this is
+   used very often. */
+static inline void *video_drvdata()
+{
+	return video_get_drvdata(video_devdata());
+}
+
+static inline const char *video_device_node_name(struct video_device *vdev)
+{
+	//return dev_name(&vdev->dev);
+	return (vdev->init_name);
+}
+
+static inline int video_is_registered(struct video_device *vdev)
+{
+	return test_bit(V4L2_FL_REGISTERED, &vdev->flags);
+}
+
+#endif /* _V4L2_DEV_H */

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-device.h

@@ -0,0 +1,216 @@
+/*
+    V4L2 device support header.
+
+    Copyright (C) 2008  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _V4L2_DEVICE_H
+#define _V4L2_DEVICE_H
+
+#include "media-device.h"
+#include "v4l2-subdev.h"
+#include "v4l2-dev.h"
+
+
+
+
+/* Each instance of a V4L2 device should create the v4l2_device struct,
+   either stand-alone or embedded in a larger struct.
+
+   It allows easy access to sub-devices (see v4l2-subdev.h) and provides
+   basic V4L2 device-level support.
+ */
+
+#define V4L2_DEVICE_NAME_SIZE (20 + 16)
+
+struct v4l2_ctrl_handler;
+
+struct v4l2_device {
+	/* dev->driver_data points to this struct.
+	   Note: dev might be NULL if there is no parent device
+	   as is the case with e.g. ISA devices. */
+	//struct device *dev;
+	//void *dev;
+	void *dev_driver_data;
+//edit by Ian        
+	//unsigned long dev_ref_count;
+#if defined(CONFIG_MEDIA_CONTROLLER)
+	struct media_device *mdev;
+#endif
+	/* used to keep track of the registered subdevs */
+	struct list_head subdevs;
+	/* lock this struct; can be used by the driver as well if this
+	   struct is embedded into a larger struct. */
+	//spinlock_t lock;
+	_Lock lock;
+	/* unique device name, by default the driver name + bus ID */
+	char name[V4L2_DEVICE_NAME_SIZE];
+	/* notify callback called by some sub-devices. */
+	void (*notify)(struct v4l2_subdev *sd, unsigned int notification, void *arg);
+	/* The control handler. May be NULL. */
+	struct v4l2_ctrl_handler *ctrl_handler;
+	/* Device's priority state */
+	struct v4l2_prio_state prio;
+	/* BKL replacement mutex. Temporary solution only. */
+	//struct mutex ioctl_lock;
+	_Mutex ioctl_lock;
+	/* Keep track of the references to this struct. */
+	//struct kref ref;
+	unsigned long ref;
+	/* Release function that is called when the ref count goes to 0. */
+	void (*release)(struct v4l2_device *v4l2_dev);
+};
+
+static inline void v4l2_device_get(struct v4l2_device *v4l2_dev)
+{
+	//kref_get(&v4l2_dev->ref);
+	atomic_inc((atomic_t *)&v4l2_dev->ref);
+}
+
+int v4l2_device_put(struct v4l2_device *v4l2_dev);
+
+/* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev.
+   dev may be NULL in rare cases (ISA devices). In that case you
+   must fill in the v4l2_dev->name field before calling this function. */
+//int v4l2_device_register(struct v4l2_device *v4l2_dev);
+int v4l2_device_register(void *dev_prive_date, struct v4l2_device *v4l2_dev);
+
+/* Optional function to initialize the name field of struct v4l2_device using
+   the driver name and a driver-global atomic_t instance.
+   This function will increment the instance counter and returns the instance
+   value used in the name.
+
+   Example:
+
+   static atomic_t drv_instance = ATOMIC_INIT(0);
+
+   ...
+
+   instance = v4l2_device_set_name(&v4l2_dev, "foo", &drv_instance);
+
+   The first time this is called the name field will be set to foo0 and
+   this function returns 0. If the name ends with a digit (e.g. cx18),
+   then the name will be set to cx18-0 since cx180 looks really odd. */
+int v4l2_device_set_name(struct v4l2_device *v4l2_dev, const char *basename,
+						atomic_t *instance);
+
+/* Set v4l2_dev->dev to NULL. Call when the USB parent disconnects.
+   Since the parent disappears this ensures that v4l2_dev doesn't have an
+   invalid parent pointer. */
+void v4l2_device_disconnect(struct v4l2_device *v4l2_dev);
+
+/* Unregister all sub-devices and any other resources related to v4l2_dev. */
+void v4l2_device_unregister(struct v4l2_device *v4l2_dev);
+
+/* Register a subdev with a v4l2 device. While registered the subdev module
+   is marked as in-use. An error is returned if the module is no longer
+   loaded when you attempt to register it. */
+int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
+						struct v4l2_subdev *sd);
+/* Unregister a subdev with a v4l2 device. Can also be called if the subdev
+   wasn't registered. In that case it will do nothing. */
+void v4l2_device_unregister_subdev(struct v4l2_subdev *sd);
+
+/* Register device nodes for all subdev of the v4l2 device that are marked with
+ * the V4L2_SUBDEV_FL_HAS_DEVNODE flag.
+ */
+int v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev);
+
+/* Iterate over all subdevs. */
+#define v4l2_device_for_each_subdev(sd, v4l2_dev)			\
+	list_for_each_entry(sd, &(v4l2_dev)->subdevs, list, struct v4l2_subdev)
+
+/* Call the specified callback for all subdevs matching the condition.
+   Ignore any errors. Note that you cannot add or delete a subdev
+   while walking the subdevs list. */
+#define __v4l2_device_call_subdevs_p(v4l2_dev, sd, cond, o, f, args...)	\
+	do { 								\
+		list_for_each_entry((sd), &(v4l2_dev)->subdevs, list, struct v4l2_subdev) \
+			if ((cond) && (sd)->ops->o && (sd)->ops->o->f)	\
+				(sd)->ops->o->f((sd) , ##args);		\
+	} while (0)
+
+#define __v4l2_device_call_subdevs(v4l2_dev, cond, o, f, args...)	\
+	do {								\
+		struct v4l2_subdev *__sd;				\
+									\
+		__v4l2_device_call_subdevs_p(v4l2_dev, __sd, cond, o,	\
+						f , ##args);		\
+	} while (0)
+
+/* Call the specified callback for all subdevs matching the condition.
+   If the callback returns an error other than 0 or -ENOIOCTLCMD, then
+   return with that error code. Note that you cannot add or delete a
+   subdev while walking the subdevs list. */
+#define __v4l2_device_call_subdevs_until_err_p(v4l2_dev, sd, cond, o, f, args...) \
+({ 									\
+	long __err = 0;							\
+									\
+	list_for_each_entry((sd), &(v4l2_dev)->subdevs, list, struct v4l2_subdev) {		\
+		if ((cond) && (sd)->ops->o && (sd)->ops->o->f)		\
+			__err = (sd)->ops->o->f((sd) , ##args);		\
+		if (__err && __err != -ENOIOCTLCMD)			\
+			break; 						\
+	} 								\
+	(__err == -ENOIOCTLCMD) ? 0 : __err;				\
+})
+
+#define __v4l2_device_call_subdevs_until_err(v4l2_dev, cond, o, f, args...) \
+({									\
+	struct v4l2_subdev *__sd;					\
+	__v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, cond, o,	\
+						f , ##args);		\
+})
+
+/* Call the specified callback for all subdevs matching grp_id (if 0, then
+   match them all). Ignore any errors. Note that you cannot add or delete
+   a subdev while walking the subdevs list. */
+#define v4l2_device_call_all(v4l2_dev, grpid, o, f, args...)		\
+	do {								\
+		struct v4l2_subdev *__sd;				\
+									\
+		__v4l2_device_call_subdevs_p(v4l2_dev, __sd,		\
+			!(grpid) || __sd->grp_id == (grpid), o, f ,	\
+			##args);					\
+	} while (0)
+
+/* Call the specified callback for all subdevs matching grp_id (if 0, then
+   match them all). If the callback returns an error other than 0 or
+   -ENOIOCTLCMD, then return with that error code. Note that you cannot
+   add or delete a subdev while walking the subdevs list. */
+#define v4l2_device_call_until_err(v4l2_dev, grpid, o, f, args...) 	\
+({									\
+	struct v4l2_subdev *__sd;					\
+	__v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd,		\
+			!(grpid) || __sd->grp_id == (grpid), o, f ,	\
+			##args);					\
+})
+
+#define v4l2_device_has_op(v4l2_dev, o, f)				\
+({									\
+	struct v4l2_subdev *__sd;					\
+	bool __result = FALSE;						\
+	list_for_each_entry(__sd, &(v4l2_dev)->subdevs, list, struct v4l2_subdev) {		\
+		if (v4l2_subdev_has_op(__sd, o, f)) {			\
+			__result = true;				\
+			break;						\
+		}							\
+	}								\
+	__result;							\
+})
+
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-event.h

@@ -0,0 +1,139 @@
+/*
+ * v4l2-event.h
+ *
+ * V4L2 events.
+ *
+ * Copyright (C) 2009--2010 Nokia Corporation.
+ *
+ * Contact: Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef V4L2_EVENT_H
+#define V4L2_EVENT_H
+
+#if 0
+#include <linux/types.h>
+#include <linux/wait.h>
+#endif
+#include "v4l2-osdep.h"
+#include "videodev2.h"
+
+
+/*
+ * Overview:
+ *
+ * Events are subscribed per-filehandle. An event specification consists of a
+ * type and is optionally associated with an object identified through the
+ * 'id' field. So an event is uniquely identified by the (type, id) tuple.
+ *
+ * The v4l2-fh struct has a list of subscribed events. The v4l2_subscribed_event
+ * struct is added to that list, one for every subscribed event.
+ *
+ * Each v4l2_subscribed_event struct ends with an array of v4l2_kevent structs.
+ * This array (ringbuffer, really) is used to store any events raised by the
+ * driver. The v4l2_kevent struct links into the 'available' list of the
+ * v4l2_fh struct so VIDIOC_DQEVENT will know which event to dequeue first.
+ *
+ * Finally, if the event subscription is associated with a particular object
+ * such as a V4L2 control, then that object needs to know about that as well
+ * so that an event can be raised by that object. So the 'node' field can
+ * be used to link the v4l2_subscribed_event struct into a list of that
+ * object.
+ *
+ * So to summarize:
+ *
+ * struct v4l2_fh has two lists: one of the subscribed events, and one of the
+ * pending events.
+ *
+ * struct v4l2_subscribed_event has a ringbuffer of raised (pending) events of
+ * that particular type.
+ *
+ * If struct v4l2_subscribed_event is associated with a specific object, then
+ * that object will have an internal list of struct v4l2_subscribed_event so
+ * it knows who subscribed an event to that object.
+ */
+
+struct v4l2_fh;
+struct v4l2_subdev;
+struct v4l2_subscribed_event;
+struct video_device;
+
+/** struct v4l2_kevent - Internal kernel event struct.
+  * @list:	List node for the v4l2_fh->available list.
+  * @sev:	Pointer to parent v4l2_subscribed_event.
+  * @event:	The event itself.
+  */
+struct v4l2_kevent {
+	struct list_head list;
+	struct v4l2_subscribed_event *sev;
+	struct v4l2_event	event;
+};
+
+/** struct v4l2_subscribed_event_ops - Subscribed event operations.
+  * @add:	Optional callback, called when a new listener is added
+  * @del:	Optional callback, called when a listener stops listening
+  * @replace:	Optional callback that can replace event 'old' with event 'new'.
+  * @merge:	Optional callback that can merge event 'old' into event 'new'.
+  */
+struct v4l2_subscribed_event_ops {
+	int  (*add)(struct v4l2_subscribed_event *sev, unsigned elems);
+	void (*del)(struct v4l2_subscribed_event *sev);
+	void (*replace)(struct v4l2_event *old, const struct v4l2_event *new);
+	void (*merge)(const struct v4l2_event *old, struct v4l2_event *new);
+};
+
+/** struct v4l2_subscribed_event - Internal struct representing a subscribed event.
+  * @list:	List node for the v4l2_fh->subscribed list.
+  * @type:	Event type.
+  * @id:	Associated object ID (e.g. control ID). 0 if there isn't any.
+  * @flags:	Copy of v4l2_event_subscription->flags.
+  * @fh:	Filehandle that subscribed to this event.
+  * @node:	List node that hooks into the object's event list (if there is one).
+  * @ops:	v4l2_subscribed_event_ops
+  * @elems:	The number of elements in the events array.
+  * @first:	The index of the events containing the oldest available event.
+  * @in_use:	The number of queued events.
+  * @events:	An array of @elems events.
+  */
+struct v4l2_subscribed_event {
+	struct list_head list;
+	u32			type;
+	u32			id;
+	u32			flags;
+	struct v4l2_fh		*fh;
+	struct list_head node;
+	const struct v4l2_subscribed_event_ops *ops;
+	unsigned		elems;
+	unsigned		first;
+	unsigned		in_use;
+	struct v4l2_kevent	events[];
+};
+
+int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event,
+		       int nonblocking);
+void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev);
+void v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev);
+int v4l2_event_pending(struct v4l2_fh *fh);
+int v4l2_event_subscribe(struct v4l2_fh *fh,
+			 const struct v4l2_event_subscription *sub, unsigned elems,
+			 const struct v4l2_subscribed_event_ops *ops);
+int v4l2_event_unsubscribe(struct v4l2_fh *fh,
+			   const struct v4l2_event_subscription *sub);
+void v4l2_event_unsubscribe_all(struct v4l2_fh *fh);
+int v4l2_event_subdev_unsubscribe(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+				  struct v4l2_event_subscription *sub);
+#endif /* V4L2_EVENT_H */

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-fh.h

@@ -0,0 +1,108 @@
+/*
+ * v4l2-fh.h
+ *
+ * V4L2 file handle. Store per file handle data for the V4L2
+ * framework. Using file handles is optional for the drivers.
+ *
+ * Copyright (C) 2009--2010 Nokia Corporation.
+ *
+ * Contact: Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef V4L2_FH_H
+#define V4L2_FH_H
+
+//#include <linux/list.h>
+
+#include "v4l2-osdep.h"
+
+struct video_device;
+struct v4l2_ctrl_handler;
+
+struct v4l2_fh {
+	struct list_head list;
+	struct video_device	*vdev;
+	struct v4l2_ctrl_handler *ctrl_handler;
+	enum v4l2_priority	prio;
+
+	/* Events */
+	//wait_queue_head_t	wait;
+	_Sema			wait;
+	struct list_head	subscribed; /* Subscribed events */
+	struct list_head	available; /* Dequeueable event */
+	unsigned int		navailable;
+	u32			sequence;
+};
+
+/*
+ * Initialise the file handle. Parts of the V4L2 framework using the
+ * file handles should be initialised in this function. Must be called
+ * from driver's v4l2_file_operations->open() handler if the driver
+ * uses v4l2_fh.
+ */
+void v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev);
+/*
+ * Add the fh to the list of file handles on a video_device. The file
+ * handle must be initialised first.
+ */
+void v4l2_fh_add(struct v4l2_fh *fh);
+/*
+ * Can be used as the open() op of v4l2_file_operations.
+ * It allocates a v4l2_fh and inits and adds it to the video_device associated
+ * with the file pointer.
+ */
+int v4l2_fh_open();
+/*
+ * Remove file handle from the list of file handles. Must be called in
+ * v4l2_file_operations->release() handler if the driver uses v4l2_fh.
+ * On error filp->private_data will be NULL, otherwise it will point to
+ * the v4l2_fh struct.
+ */
+void v4l2_fh_del(struct v4l2_fh *fh);
+/*
+ * Release resources related to a file handle. Parts of the V4L2
+ * framework using the v4l2_fh must release their resources here, too.
+ * Must be called in v4l2_file_operations->release() handler if the
+ * driver uses v4l2_fh.
+ */
+void v4l2_fh_exit(struct v4l2_fh *fh);
+/*
+ * Can be used as the release() op of v4l2_file_operations.
+ * It deletes and exits the v4l2_fh associated with the file pointer and
+ * frees it. It will do nothing if filp->private_data (the pointer to the
+ * v4l2_fh struct) is NULL. This function always returns 0.
+ */
+int v4l2_fh_release();
+/*
+ * Returns 1 if this filehandle is the only filehandle opened for the
+ * associated video_device. If fh is NULL, then it returns 0.
+ */
+int v4l2_fh_is_singular(struct v4l2_fh *fh);
+/*
+ * Helper function with struct file as argument. If filp->private_data is
+ * NULL, then it will return 0.
+ */
+extern void *replace_files[16];
+static inline int v4l2_fh_is_singular_file()
+{
+	//struct v4l2_fh *fh = replace_files[0];
+	struct video_device *vdev = video_devdata();
+	struct v4l2_fh *fh = replace_files[vdev->minor];
+	return v4l2_fh_is_singular(fh);
+}
+
+#endif /* V4L2_EVENT_H */

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-int-device.h

@@ -0,0 +1,306 @@
+/*
+ * include/media/v4l2-int-device.h
+ *
+ * V4L2 internal ioctl interface.
+ *
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * Contact: Sakari Ailus <sakari.ailus@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef V4L2_INT_DEVICE_H
+#define V4L2_INT_DEVICE_H
+
+#include "v4l2-common.h"
+
+
+#define V4L2NAMESIZE 32
+
+/*
+ *
+ * The internal V4L2 device interface core.
+ *
+ */
+
+enum v4l2_int_type {
+	v4l2_int_type_master = 1,
+	v4l2_int_type_slave
+};
+
+//struct module;
+
+struct v4l2_int_device;
+
+struct v4l2_int_master {
+	int (*attach)(struct v4l2_int_device *slave);
+	void (*detach)(struct v4l2_int_device *slave);
+};
+
+typedef int (v4l2_int_ioctl_func)(struct v4l2_int_device *);
+typedef int (v4l2_int_ioctl_func_0)(struct v4l2_int_device *);
+typedef int (v4l2_int_ioctl_func_1)(struct v4l2_int_device *, void *);
+
+struct v4l2_int_ioctl_desc {
+	int num;
+	v4l2_int_ioctl_func *func;
+};
+
+struct v4l2_int_slave {
+	/* Don't touch master. */
+	struct v4l2_int_device *master;
+
+	char attach_to[V4L2NAMESIZE];
+
+	int num_ioctls;
+	struct v4l2_int_ioctl_desc *ioctls;
+};
+
+struct v4l2_int_device {
+	/* Don't touch head. */
+	struct LIST_HEADER head;
+
+	//struct module *module;
+
+	char name[V4L2NAMESIZE];
+
+	enum v4l2_int_type type;
+	union {
+		struct v4l2_int_master *master;
+		struct v4l2_int_slave *slave;
+	} u;
+
+	void *priv;
+};
+
+void v4l2_int_device_try_attach_all(void);
+
+int v4l2_int_device_register(struct v4l2_int_device *d);
+void v4l2_int_device_unregister(struct v4l2_int_device *d);
+
+int v4l2_int_ioctl_0(struct v4l2_int_device *d, int cmd);
+int v4l2_int_ioctl_1(struct v4l2_int_device *d, int cmd, void *arg);
+
+/*
+ *
+ * Types and definitions for IOCTL commands.
+ *
+ */
+
+enum v4l2_power {
+	V4L2_POWER_OFF = 0,
+	V4L2_POWER_ON,
+	V4L2_POWER_STANDBY,
+};
+
+/* Slave interface type. */
+enum v4l2_if_type {
+	/*
+	 * Parallel 8-, 10- or 12-bit interface, used by for example
+	 * on certain image sensors.
+	 */
+	V4L2_IF_TYPE_BT656,
+};
+
+enum v4l2_if_type_bt656_mode {
+	/*
+	 * Modes without Bt synchronisation codes. Separate
+	 * synchronisation signal lines are used.
+	 */
+	V4L2_IF_TYPE_BT656_MODE_NOBT_8BIT,
+	V4L2_IF_TYPE_BT656_MODE_NOBT_10BIT,
+	V4L2_IF_TYPE_BT656_MODE_NOBT_12BIT,
+	/*
+	 * Use Bt synchronisation codes. The vertical and horizontal
+	 * synchronisation is done based on synchronisation codes.
+	 */
+	V4L2_IF_TYPE_BT656_MODE_BT_8BIT,
+	V4L2_IF_TYPE_BT656_MODE_BT_10BIT,
+};
+
+struct v4l2_if_type_bt656 {
+	/*
+	 * 0: Frame begins when vsync is high.
+	 * 1: Frame begins when vsync changes from low to high.
+	 */
+	unsigned frame_start_on_rising_vs:1;
+	/* Use Bt synchronisation codes for sync correction. */
+	unsigned bt_sync_correct:1;
+	/* Swap every two adjacent image data elements. */
+	unsigned swap:1;
+	/* Inverted latch clock polarity from slave. */
+	unsigned latch_clk_inv:1;
+	/* Hs polarity. 0 is active high, 1 active low. */
+	unsigned nobt_hs_inv:1;
+	/* Vs polarity. 0 is active high, 1 active low. */
+	unsigned nobt_vs_inv:1;
+	enum v4l2_if_type_bt656_mode mode;
+	/* Minimum accepted bus clock for slave (in Hz). */
+	u32 clock_min;
+	/* Maximum accepted bus clock for slave. */
+	u32 clock_max;
+	/*
+	 * Current wish of the slave. May only change in response to
+	 * ioctls that affect image capture.
+	 */
+	u32 clock_curr;
+};
+
+struct v4l2_ifparm {
+	enum v4l2_if_type if_type;
+	union {
+		struct v4l2_if_type_bt656 bt656;
+	} u;
+};
+
+/* IOCTL command numbers. */
+enum v4l2_int_ioctl_num {
+	/*
+	 *
+	 * "Proper" V4L ioctls, as in struct video_device.
+	 *
+	 */
+	vidioc_int_enum_fmt_cap_num = 1,
+	vidioc_int_g_fmt_cap_num,
+	vidioc_int_s_fmt_cap_num,
+	vidioc_int_try_fmt_cap_num,
+	vidioc_int_queryctrl_num,
+	vidioc_int_g_ctrl_num,
+	vidioc_int_s_ctrl_num,
+	vidioc_int_cropcap_num,
+	vidioc_int_g_crop_num,
+	vidioc_int_s_crop_num,
+	vidioc_int_g_parm_num,
+	vidioc_int_s_parm_num,
+	vidioc_int_querystd_num,
+	vidioc_int_s_std_num,
+	vidioc_int_s_video_routing_num,
+
+	/*
+	 *
+	 * Strictly internal ioctls.
+	 *
+	 */
+	/* Initialise the device when slave attaches to the master. */
+	vidioc_int_dev_init_num = 1000,
+	/* Delinitialise the device at slave detach. */
+	vidioc_int_dev_exit_num,
+	/* Set device power state. */
+	vidioc_int_s_power_num,
+	/*
+	* Get slave private data, e.g. platform-specific slave
+	* configuration used by the master.
+	*/
+	vidioc_int_g_priv_num,
+	/* Get slave interface parameters. */
+	vidioc_int_g_ifparm_num,
+	/* Does the slave need to be reset after VIDIOC_DQBUF? */
+	vidioc_int_g_needs_reset_num,
+	vidioc_int_enum_framesizes_num,
+	vidioc_int_enum_frameintervals_num,
+
+	/*
+	 *
+	 * VIDIOC_INT_* ioctls.
+	 *
+	 */
+	/* VIDIOC_INT_RESET */
+	vidioc_int_reset_num,
+	/* VIDIOC_INT_INIT */
+	vidioc_int_init_num,
+
+	/*
+	 *
+	 * Start of private ioctls.
+	 *
+	 */
+	vidioc_int_priv_start_num = 2000,
+};
+
+/*
+ *
+ * IOCTL wrapper functions for better type checking.
+ *
+ */
+
+#define V4L2_INT_WRAPPER_0(name)					\
+	static inline int vidioc_int_##name(struct v4l2_int_device *d)	\
+	{								\
+		return v4l2_int_ioctl_0(d, vidioc_int_##name##_num);	\
+	}								\
+									\
+	static inline struct v4l2_int_ioctl_desc			\
+	vidioc_int_##name##_cb(int (*func)				\
+			       (struct v4l2_int_device *))		\
+	{								\
+		struct v4l2_int_ioctl_desc desc;			\
+									\
+		desc.num = vidioc_int_##name##_num;			\
+		desc.func = (v4l2_int_ioctl_func *)func;		\
+									\
+		return desc;						\
+	}
+
+#define V4L2_INT_WRAPPER_1(name, arg_type, asterisk)			\
+	static inline int vidioc_int_##name(struct v4l2_int_device *d,	\
+					    arg_type asterisk arg)	\
+	{								\
+		return v4l2_int_ioctl_1(d, vidioc_int_##name##_num,	\
+					(void *)(unsigned long)arg);	\
+	}								\
+									\
+	static inline struct v4l2_int_ioctl_desc			\
+	vidioc_int_##name##_cb(int (*func)				\
+			       (struct v4l2_int_device *,		\
+				arg_type asterisk))			\
+	{								\
+		struct v4l2_int_ioctl_desc desc;			\
+									\
+		desc.num = vidioc_int_##name##_num;			\
+		desc.func = (v4l2_int_ioctl_func *)func;		\
+									\
+		return desc;						\
+	}
+
+V4L2_INT_WRAPPER_1(enum_fmt_cap, struct v4l2_fmtdesc, *);
+V4L2_INT_WRAPPER_1(g_fmt_cap, struct v4l2_format, *);
+V4L2_INT_WRAPPER_1(s_fmt_cap, struct v4l2_format, *);
+V4L2_INT_WRAPPER_1(try_fmt_cap, struct v4l2_format, *);
+V4L2_INT_WRAPPER_1(queryctrl, struct v4l2_queryctrl, *);
+V4L2_INT_WRAPPER_1(g_ctrl, struct v4l2_control, *);
+V4L2_INT_WRAPPER_1(s_ctrl, struct v4l2_control, *);
+V4L2_INT_WRAPPER_1(cropcap, struct v4l2_cropcap, *);
+V4L2_INT_WRAPPER_1(g_crop, struct v4l2_crop, *);
+V4L2_INT_WRAPPER_1(s_crop, struct v4l2_crop, *);
+V4L2_INT_WRAPPER_1(g_parm, struct v4l2_streamparm, *);
+V4L2_INT_WRAPPER_1(s_parm, struct v4l2_streamparm, *);
+V4L2_INT_WRAPPER_1(querystd, v4l2_std_id, *);
+V4L2_INT_WRAPPER_1(s_std, v4l2_std_id, *);
+V4L2_INT_WRAPPER_1(s_video_routing, struct v4l2_routing, *);
+
+V4L2_INT_WRAPPER_0(dev_init);
+V4L2_INT_WRAPPER_0(dev_exit);
+V4L2_INT_WRAPPER_1(s_power, enum v4l2_power, );
+V4L2_INT_WRAPPER_1(g_priv, void, *);
+V4L2_INT_WRAPPER_1(g_ifparm, struct v4l2_ifparm, *);
+V4L2_INT_WRAPPER_1(g_needs_reset, void, *);
+V4L2_INT_WRAPPER_1(enum_framesizes, struct v4l2_frmsizeenum, *);
+V4L2_INT_WRAPPER_1(enum_frameintervals, struct v4l2_frmivalenum, *);
+
+V4L2_INT_WRAPPER_0(reset);
+V4L2_INT_WRAPPER_0(init);
+
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-ioctl.h

@@ -0,0 +1,320 @@
+/*
+ *
+ *	V 4 L 2   D R I V E R   H E L P E R   A P I
+ *
+ * Moved from videodev2.h
+ *
+ *	Some commonly needed functions for drivers (v4l2-common.o module)
+ */
+#ifndef _V4L2_IOCTL_H
+#define _V4L2_IOCTL_H
+
+#if 0
+#include <linux/poll.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/compiler.h> /* need __user */
+#endif
+#include "v4l2-osdep.h"
+#include "videodev2.h"
+
+struct v4l2_fh;
+
+struct v4l2_ioctl_ops {
+	/* ioctl callbacks */
+
+	/* VIDIOC_QUERYCAP handler */
+	int (*vidioc_querycap)(void *fh, struct v4l2_capability *cap);
+
+	/* Priority handling */
+	int (*vidioc_g_priority)   (void *fh,
+				    enum v4l2_priority *p);
+	int (*vidioc_s_priority)   (void *fh,
+				    enum v4l2_priority p);
+
+	/* VIDIOC_ENUM_FMT handlers */
+	int (*vidioc_enum_fmt_vid_cap)     (void *fh,
+					    struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_vid_overlay) (void *fh,
+					    struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_vid_out)     (void *fh,
+					    struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_vid_cap_mplane)(void *fh,
+					      struct v4l2_fmtdesc *f);
+	int (*vidioc_enum_fmt_vid_out_mplane)(void *fh,
+					      struct v4l2_fmtdesc *f);
+
+	/* VIDIOC_G_FMT handlers */
+	int (*vidioc_g_fmt_vid_cap)    (void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_overlay)(void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_out)    (void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_out_overlay)(void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vbi_cap)    (void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vbi_out)    (void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_sliced_vbi_cap)(void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_sliced_vbi_out)(void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_cap_mplane)(void *fh,
+					   struct v4l2_format *f);
+	int (*vidioc_g_fmt_vid_out_mplane)(void *fh,
+					   struct v4l2_format *f);
+
+	/* VIDIOC_S_FMT handlers */
+	int (*vidioc_s_fmt_vid_cap)    (void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_overlay)(void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_out)    (void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_out_overlay)(void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vbi_cap)    (void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vbi_out)    (void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_sliced_vbi_cap)(void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_sliced_vbi_out)(void *fh,
+					struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_cap_mplane)(void *fh,
+					   struct v4l2_format *f);
+	int (*vidioc_s_fmt_vid_out_mplane)(void *fh,
+					   struct v4l2_format *f);
+
+	/* VIDIOC_TRY_FMT handlers */
+	int (*vidioc_try_fmt_vid_cap)    (void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_overlay)(void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_out)    (void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_out_overlay)(void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vbi_cap)    (void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vbi_out)    (void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_sliced_vbi_cap)(void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_sliced_vbi_out)(void *fh,
+					  struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_cap_mplane)(void *fh,
+					     struct v4l2_format *f);
+	int (*vidioc_try_fmt_vid_out_mplane)(void *fh,
+					     struct v4l2_format *f);
+
+	/* Buffer handlers */
+	int (*vidioc_reqbufs) (void *fh, struct v4l2_requestbuffers *b);
+	int (*vidioc_querybuf)(void *fh, struct v4l2_buffer *b);
+	int (*vidioc_qbuf)    (void *fh, struct v4l2_buffer *b);
+	int (*vidioc_expbuf)  (void *fh,
+				struct v4l2_exportbuffer *e);
+	int (*vidioc_dqbuf)   (void *fh, struct v4l2_buffer *b);
+
+	int (*vidioc_create_bufs)(void *fh, struct v4l2_create_buffers *b);
+	int (*vidioc_prepare_buf)(void *fh, struct v4l2_buffer *b);
+
+	int (*vidioc_overlay) (void *fh, unsigned int i);
+	int (*vidioc_g_fbuf)   (void *fh,
+				struct v4l2_framebuffer *a);
+	int (*vidioc_s_fbuf)   (void *fh,
+				const struct v4l2_framebuffer *a);
+
+	/* Stream on/off */
+	int (*vidioc_streamon) (void *fh, enum v4l2_buf_type i);
+	int (*vidioc_streamoff)(void *fh, enum v4l2_buf_type i);
+
+	/* Standard handling
+		ENUMSTD is handled by videodev.c
+	 */
+	int (*vidioc_g_std) (void *fh, v4l2_std_id *norm);
+	int (*vidioc_s_std) (void *fh, v4l2_std_id norm);
+	int (*vidioc_querystd) (void *fh, v4l2_std_id *a);
+
+	/* Input handling */
+	int (*vidioc_enum_input)(void *fh,
+				 struct v4l2_input *inp);
+	int (*vidioc_g_input)   (void *fh, unsigned int *i);
+	int (*vidioc_s_input)   (void *fh, unsigned int i);
+
+	/* Output handling */
+	int (*vidioc_enum_output) (void *fh,
+				  struct v4l2_output *a);
+	int (*vidioc_g_output)   (void *fh, unsigned int *i);
+	int (*vidioc_s_output)   (void *fh, unsigned int i);
+
+	/* Control handling */
+	int (*vidioc_queryctrl)        (void *fh,
+					struct v4l2_queryctrl *a);
+	int (*vidioc_g_ctrl)           (void *fh,
+					struct v4l2_control *a);
+	int (*vidioc_s_ctrl)           (void *fh,
+					struct v4l2_control *a);
+	int (*vidioc_g_ext_ctrls)      (void *fh,
+					struct v4l2_ext_controls *a);
+	int (*vidioc_s_ext_ctrls)      (void *fh,
+					struct v4l2_ext_controls *a);
+	int (*vidioc_try_ext_ctrls)    (void *fh,
+					struct v4l2_ext_controls *a);
+	int (*vidioc_querymenu)        (void *fh,
+					struct v4l2_querymenu *a);
+
+	/* Audio ioctls */
+	int (*vidioc_enumaudio)        (void *fh,
+					struct v4l2_audio *a);
+	int (*vidioc_g_audio)          (void *fh,
+					struct v4l2_audio *a);
+	int (*vidioc_s_audio)          (void *fh,
+					const struct v4l2_audio *a);
+
+	/* Audio out ioctls */
+	int (*vidioc_enumaudout)       (void *fh,
+					struct v4l2_audioout *a);
+	int (*vidioc_g_audout)         (void *fh,
+					struct v4l2_audioout *a);
+	int (*vidioc_s_audout)         (void *fh,
+					const struct v4l2_audioout *a);
+	int (*vidioc_g_modulator)      (void *fh,
+					struct v4l2_modulator *a);
+	int (*vidioc_s_modulator)      (void *fh,
+					const struct v4l2_modulator *a);
+	/* Crop ioctls */
+	int (*vidioc_cropcap)          (void *fh,
+					struct v4l2_cropcap *a);
+	int (*vidioc_g_crop)           (void *fh,
+					struct v4l2_crop *a);
+	int (*vidioc_s_crop)           (void *fh,
+					const struct v4l2_crop *a);
+	int (*vidioc_g_selection)      (void *fh,
+					struct v4l2_selection *s);
+	int (*vidioc_s_selection)      (void *fh,
+					struct v4l2_selection *s);
+	/* Compression ioctls */
+	int (*vidioc_g_jpegcomp)       (void *fh,
+					struct v4l2_jpegcompression *a);
+	int (*vidioc_s_jpegcomp)       (void *fh,
+					const struct v4l2_jpegcompression *a);
+	int (*vidioc_g_enc_index)      ( void *fh,
+					struct v4l2_enc_idx *a);
+	int (*vidioc_encoder_cmd)      (void *fh,
+					struct v4l2_encoder_cmd *a);
+	int (*vidioc_try_encoder_cmd)  (void *fh,
+					struct v4l2_encoder_cmd *a);
+	int (*vidioc_decoder_cmd)      (void *fh,
+					struct v4l2_decoder_cmd *a);
+	int (*vidioc_try_decoder_cmd)  (void *fh,
+					struct v4l2_decoder_cmd *a);
+
+	/* Stream type-dependent parameter ioctls */
+	int (*vidioc_g_parm)           (void *fh,
+					struct v4l2_streamparm *a);
+	int (*vidioc_s_parm)           (void *fh,
+					struct v4l2_streamparm *a);
+
+	/* Tuner ioctls */
+	int (*vidioc_g_tuner)          (void *fh,
+					struct v4l2_tuner *a);
+	int (*vidioc_s_tuner)          (void *fh,
+					const struct v4l2_tuner *a);
+	int (*vidioc_g_frequency)      (void *fh,
+					struct v4l2_frequency *a);
+	int (*vidioc_s_frequency)      (void *fh,
+					const struct v4l2_frequency *a);
+	int (*vidioc_enum_freq_bands) (void *fh,
+				    struct v4l2_frequency_band *band);
+
+	/* Sliced VBI cap */
+	int (*vidioc_g_sliced_vbi_cap) (void *fh,
+					struct v4l2_sliced_vbi_cap *a);
+
+	/* Log status ioctl */
+	int (*vidioc_log_status)       ( void *fh);
+
+	int (*vidioc_s_hw_freq_seek)   (void *fh,
+					const struct v4l2_hw_freq_seek *a);
+
+	/* Debugging ioctls */
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	int (*vidioc_g_register)       (void *fh,
+					struct v4l2_dbg_register *reg);
+	int (*vidioc_s_register)       (void *fh,
+					const struct v4l2_dbg_register *reg);
+
+	int (*vidioc_g_chip_info)      (void *fh,
+					struct v4l2_dbg_chip_info *chip);
+#endif
+
+	int (*vidioc_enum_framesizes)   (void *fh,
+					 struct v4l2_frmsizeenum *fsize);
+
+	int (*vidioc_enum_frameintervals) (void *fh,
+					   struct v4l2_frmivalenum *fival);
+
+	/* DV Timings IOCTLs */
+	int (*vidioc_s_dv_timings) (void *fh,
+				    struct v4l2_dv_timings *timings);
+	int (*vidioc_g_dv_timings) (void *fh,
+				    struct v4l2_dv_timings *timings);
+	int (*vidioc_query_dv_timings) ( void *fh,
+				    struct v4l2_dv_timings *timings);
+	int (*vidioc_enum_dv_timings) (void *fh,
+				    struct v4l2_enum_dv_timings *timings);
+	int (*vidioc_dv_timings_cap) (void *fh,
+				    struct v4l2_dv_timings_cap *cap);
+
+	int (*vidioc_subscribe_event)  (struct v4l2_fh *fh,
+					const struct v4l2_event_subscription *sub);
+	int (*vidioc_unsubscribe_event)(struct v4l2_fh *fh,
+					const struct v4l2_event_subscription *sub);
+
+	/* For other private ioctls */
+	long (*vidioc_default)	       (void *fh,
+					bool valid_prio, unsigned int cmd, void *arg);
+};
+
+
+/* v4l debugging and diagnostics */
+
+/* Debug bitmask flags to be used on V4L2 */
+#define V4L2_DEBUG_IOCTL     0x01
+#define V4L2_DEBUG_IOCTL_ARG 0x02
+
+/*  Video standard functions  */
+extern const char *v4l2_norm_to_name(v4l2_std_id id);
+extern void v4l2_video_std_frame_period(int id, struct v4l2_fract *frameperiod);
+extern int v4l2_video_std_construct(struct v4l2_standard *vs,
+				    int id, const char *name);
+/* Prints the ioctl in a human-readable format. If prefix != NULL,
+   then do printk(KERN_DEBUG "%s: ", prefix) first. */
+extern void v4l_printk_ioctl(const char *prefix, unsigned int cmd);
+
+/* Internal use only: get the mutex (if any) that we need to lock for the
+   given command. */
+struct video_device;
+extern _Mutex *v4l2_ioctl_get_lock(struct video_device *vdev, unsigned cmd);
+
+/* names for fancy debug output */
+extern const char *v4l2_field_names[];
+extern const char *v4l2_type_names[];
+
+#ifdef CONFIG_COMPAT
+/* 32 Bits compatibility layer for 64 bits processors */
+extern long v4l2_compat_ioctl32(unsigned int cmd, unsigned long arg);
+#endif
+
+typedef long (*v4l2_kioctl)(unsigned int cmd, void *arg);
+
+/* Include support for obsoleted stuff */
+extern long video_usercopy(unsigned int cmd, unsigned long arg, v4l2_kioctl func);
+
+/* Standard handlers for V4L ioctl's */
+extern long video_ioctl2(unsigned int cmd, unsigned long arg);
+
+#endif /* _V4L2_IOCTL_H */

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-mediabus.h

@@ -0,0 +1,112 @@
+/*
+ * Media Bus API header
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef V4L2_MEDIABUS_H
+#define V4L2_MEDIABUS_H
+
+#include "v4l2-mediabus.h"
+
+
+/* Parallel flags */
+/*
+ * Can the client run in master or in slave mode. By "Master mode" an operation
+ * mode is meant, when the client (e.g., a camera sensor) is producing
+ * horizontal and vertical synchronisation. In "Slave mode" the host is
+ * providing these signals to the slave.
+ */
+#define V4L2_MBUS_MASTER			(1 << 0)
+#define V4L2_MBUS_SLAVE				(1 << 1)
+/*
+ * Signal polarity flags
+ * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused
+ * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
+ * configuration of hardware that uses [HV]REF signals
+ */
+#define V4L2_MBUS_HSYNC_ACTIVE_HIGH		(1 << 2)
+#define V4L2_MBUS_HSYNC_ACTIVE_LOW		(1 << 3)
+#define V4L2_MBUS_VSYNC_ACTIVE_HIGH		(1 << 4)
+#define V4L2_MBUS_VSYNC_ACTIVE_LOW		(1 << 5)
+#define V4L2_MBUS_PCLK_SAMPLE_RISING		(1 << 6)
+#define V4L2_MBUS_PCLK_SAMPLE_FALLING		(1 << 7)
+#define V4L2_MBUS_DATA_ACTIVE_HIGH		(1 << 8)
+#define V4L2_MBUS_DATA_ACTIVE_LOW		(1 << 9)
+/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
+#define V4L2_MBUS_FIELD_EVEN_HIGH		(1 << 10)
+/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
+#define V4L2_MBUS_FIELD_EVEN_LOW		(1 << 11)
+/* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */
+#define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH	(1 << 12)
+#define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW		(1 << 13)
+
+/* Serial flags */
+/* How many lanes the client can use */
+#define V4L2_MBUS_CSI2_1_LANE			(1 << 0)
+#define V4L2_MBUS_CSI2_2_LANE			(1 << 1)
+#define V4L2_MBUS_CSI2_3_LANE			(1 << 2)
+#define V4L2_MBUS_CSI2_4_LANE			(1 << 3)
+/* On which channels it can send video data */
+#define V4L2_MBUS_CSI2_CHANNEL_0		(1 << 4)
+#define V4L2_MBUS_CSI2_CHANNEL_1		(1 << 5)
+#define V4L2_MBUS_CSI2_CHANNEL_2		(1 << 6)
+#define V4L2_MBUS_CSI2_CHANNEL_3		(1 << 7)
+/* Does it support only continuous or also non-continuous clock mode */
+#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK		(1 << 8)
+#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK	(1 << 9)
+
+#define V4L2_MBUS_CSI2_LANES		(V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_2_LANE | \
+					 V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE)
+#define V4L2_MBUS_CSI2_CHANNELS		(V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \
+					 V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3)
+
+/**
+ * v4l2_mbus_type - media bus type
+ * @V4L2_MBUS_PARALLEL:	parallel interface with hsync and vsync
+ * @V4L2_MBUS_BT656:	parallel interface with embedded synchronisation, can
+ *			also be used for BT.1120
+ * @V4L2_MBUS_CSI2:	MIPI CSI-2 serial interface
+ */
+enum v4l2_mbus_type {
+	V4L2_MBUS_PARALLEL,
+	V4L2_MBUS_BT656,
+	V4L2_MBUS_CSI2,
+};
+
+/**
+ * v4l2_mbus_config - media bus configuration
+ * @type:	in: interface type
+ * @flags:	in / out: configuration flags, depending on @type
+ */
+struct v4l2_mbus_config {
+	enum v4l2_mbus_type type;
+	unsigned int flags;
+};
+
+#if 0
+static inline void v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt,
+				const struct v4l2_mbus_framefmt *mbus_fmt)
+{
+	pix_fmt->width = mbus_fmt->width;
+	pix_fmt->height = mbus_fmt->height;
+	pix_fmt->field = mbus_fmt->field;
+	pix_fmt->colorspace = mbus_fmt->colorspace;
+}
+
+static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt,
+			   const struct v4l2_pix_format *pix_fmt,
+			   enum v4l2_mbus_pixelcode code)
+{
+	mbus_fmt->width = pix_fmt->width;
+	mbus_fmt->height = pix_fmt->height;
+	mbus_fmt->field = pix_fmt->field;
+	mbus_fmt->colorspace = pix_fmt->colorspace;
+	mbus_fmt->code = code;
+}
+#endif
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-osdep.h

@@ -0,0 +1,846 @@
+#ifndef _V4L2_OSDEP_H_
+#define _V4L2_OSDEP_H_
+
+#include "platform/platform_stdlib.h"
+#include "basic_types.h"
+#include "osdep_api.h"
+#include "usb_defs.h"
+#include "errno.h"
+//#include "hal_util.h"
+#include "dlist.h"
+
+#define V4L2_LAYER_DEBUG 0
+#if     V4L2_LAYER_DEBUG
+#define V4L2_PRINTF(fmt, args...)	printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#define V4L2_ERROR(fmt, args...)        printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#else
+#define V4L2_PRINTF(fmt, args...)
+#define V4L2_ERROR(fmt, args...)        printf("\n\r%s: " fmt, __FUNCTION__, ## args)
+#endif
+
+/* misc items */
+#ifndef ssize_t
+#define ssize_t SSIZE_T
+#endif
+#ifndef size_t
+#define size_t SIZE_T
+#endif
+
+#ifndef __user
+#define __user
+#endif
+
+#ifndef loff_t
+#define loff_t long
+#endif
+#ifndef __u8
+#define __u8 	u8
+#endif
+#ifndef __u16
+#define __u16	u16
+#endif
+#ifndef __u32
+#define __u32	u32
+#endif
+#ifndef __u64
+#define __u64	u64
+#endif
+#ifndef __s8
+#define __s8	s8
+#endif
+#ifndef __s16
+#define __s16	s16
+#endif
+#ifndef __s32
+#define __s32	s32
+#endif
+#ifndef __s64
+#define __s64	s64
+#endif
+
+#ifndef spinlock_t
+#define spinlock_t _Lock
+#endif
+
+#ifndef gfp_t
+#define gfp_t	u32
+#endif
+
+#ifndef _atomic_spin_lock_irqsave
+#define _atomic_spin_lock_irqsave(p, flags) 		SaveAndCli()
+#endif
+#ifndef _atomic_spin_unlock_irqrestore
+#define _atomic_spin_unlock_irqrestore(p, flags)	RestoreFlags()
+#endif
+#ifndef local_irq_save
+#define local_irq_save(flags)				SaveAndCli()
+#endif
+#ifndef local_irq_restore
+#define local_irq_restore(flags)			RestoreFlags()
+#endif
+#ifndef cris_atomic_save
+#define cris_atomic_save(addr, flags) 			local_irq_save(flags)
+#endif
+#ifndef cris_atomic_restore
+#define cris_atomic_restore(addr, flags) 		local_irq_restore(flags)
+#endif
+
+/*
+ * abs() handles unsigned and signed longs, ints, shorts and chars.  For all
+ * input types abs() returns a signed long.
+ * abs() should not be used for 64-bit types (s64, u64, long long) - use abs64()
+ * for those.
+ */
+
+#ifndef abs
+#define abs(x) ((x >= 0) ? (x) : (x * -1))
+#endif
+
+#ifndef min 
+#define min(x, y) ((x) < (y) ? (x) : (y))
+#endif
+#ifndef max
+#define max(x, y) ((x) > (y) ? (x) : (y))
+#endif
+#ifndef min_t 
+#define min_t(type, x, y) ({                    \
+         type __min1 = (x);                      \
+         type __min2 = (y);                      \
+         (__min1 < __min2) ? (__min1) : (__min2); })
+#endif
+#ifndef max_t
+#define max_t(type, x, y) ({                    \
+         type __max1 = (x);                      \
+         type __max2 = (y);                      \
+         (__max1 > __max2) ? (__max1) : (__max2); })
+#endif
+#ifndef max_tt
+#define max_tt(ret,type,x,y) do{                    \
+         type __max1 = (x);                      \
+         type __max2 = (y);                      \
+         ret = (__max1 > __max2) ? (__max1) : (__max2); }while(0) 
+#endif
+#ifndef min_tt 
+#define min_tt(ret,type, x, y) do{                    \
+         type __min1 = (x);                      \
+         type __min2 = (y);                      \
+         ret = (__min1 < __min2) ? (__min1) : (__min2); }while(0)
+#endif 
+
+
+/**
+* container_of - cast a member of a structure out to the containing structure
+* @p(ptr): 	   the pointer to the member.
+* @t(type):	   the type of the container struct this is embedded in.
+* @m(member):	   the name of the member within the struct.
+*
+*/
+#ifndef container_of 
+	#define container_of(ptr, type, member) \
+			((type *)((char *)(ptr)-(SIZE_T)(&((type *)0)->member)))
+#endif
+	
+	/**
+	* list_next_entry - get the next element in list
+	* @pos: 	   the type * to cursor
+	* @member:	   the name of the list_struct within the struct.
+	*/
+
+#define list_next_entry(pos, member, type)				\
+			 list_entry((pos)->member.next, type, member)
+
+	/**
+	* list_for_each_entry_continue - continue iteration over list of given type
+	* @pos: 	   the type * to use as a loop cursor.
+	* @head:	   the head for your list.
+	* @member:	   the name of the list_struct within the struct.
+	*
+	* Continue to iterate over list of given type, continuing after
+	* the current position.
+	*/
+
+#define list_for_each_entry_continue(pos, head, member, type)		\
+		for (pos = list_next_entry(pos, member, type);			\
+			&pos->member != (head); 					\
+				pos = list_next_entry(pos, member, type))           
+           
+
+/* spin lock */
+#ifndef spin_lock_init
+	#define spin_lock_init(plock) 			RtlSpinlockInit((plock))
+#endif
+#ifndef spin_lock_free
+	#define spin_lock_free(plock) 			RtlSpinlockFree((plock))
+#endif
+#ifndef spin_lock
+	#define spin_lock(plock) 			RtlSpinlock((plock))
+#endif
+#ifndef spin_unlock 
+	#define spin_unlock(plock) 			RtlSpinunlock((plock))
+#endif
+
+
+/* mutex */
+#ifndef Mutex
+	#define Mutex _Mutex
+#endif
+#ifndef mutex_init
+	#define mutex_init(pmutex)			RtlMutexInit((pmutex))
+#endif
+#ifndef mutex_lock
+	#define mutex_lock(pmutex)			RtlDownSema((pmutex))
+#endif
+#ifndef mutex_unlock
+	#define mutex_unlock(pmutex)		RtlUpSema((pmutex))	
+#endif
+#ifndef mutex_destory
+	#define mutex_destory(pmutex)			RtlMutexFree((pmutex))
+#endif
+
+/* semaphore */
+#ifndef Sema
+        #define Sema _Sema
+#endif
+#ifndef Sema_Init
+	#define Sema_Init(pmutex, pval)			RtlInitSema(pmutex, pval)
+#endif
+#ifndef Sema_Free
+	#define Sema_Free(pmutex)				RtlFreeSema(pmutex)
+#endif
+#ifndef Sema_Up
+	#define Sema_Up(pmutex)				RtlUpSema(pmutex)
+#endif
+#ifndef Sema_Down
+	#define Sema_Down(pmutex)				RtlDownSema(pmutex)
+#endif
+#ifndef Sema_Sown_WithTimeout
+	#define Sema_Down_WithTimeout(pmutex,ptimeout)			RtlDownSemaWithTimeout(pmutex,ptimeout) //
+#endif
+
+/* Atomic integer operations */
+#ifndef atomic_set
+	#define atomic_set(v, i)		RTL_ATOMIC_SET((v), (i))
+#endif
+#ifndef atomic_read
+	#define atomic_read(v)			RTL_ATOMIC_READ((v))
+#endif
+#ifndef atomic_add
+	#define atomic_add(v, i)		RTL_ATOMIC_ADD((v), (i))
+#endif
+#ifndef atomic_sub
+	#define atomic_sub(v, i)		RTL_ATOMIC_SUB((v), (i))
+#endif
+#ifndef atomic_inc
+	#define atomic_inc(v)			RTL_ATOMIC_INC((v))
+#endif
+#ifndef atomic_dec
+	#define atomic_dec(v)			RTL_ATOMIC_DEC((v))
+#endif
+
+           
+// IOCTL ...
+#ifndef _IOC_NRBITS
+#define _IOC_NRBITS 	(8) 	
+#endif
+#ifndef _IOC_TYPEBITS
+#define _IOC_TYPEBITS 	(8) 	
+#endif
+#ifndef _IOC_SIZEBITS
+#define _IOC_SIZEBITS 	(14) 	
+#endif
+#ifndef _IOC_DIRBITS
+#define _IOC_DIRBITS 	(2) 	
+#endif
+#ifndef _IOC_NRMASK
+#define _IOC_NRMASK 	((1 << _IOC_NRBITS) - 1) 
+#endif
+#ifndef _IOC_TYPEMASK
+#define _IOC_TYPEMASK 	((1 << _IOC_TYPEBITS) - 1)
+#endif
+#ifndef _IOC_SIZEMASK
+#define _IOC_SIZEMASK 	((1 << _IOC_SIZEBITS) - 1)
+#endif
+#ifndef _IOC_DIRMASK
+#define _IOC_DIRMASK 	((1 << _IOC_DIRBITS) - 1) 
+#endif
+#ifndef _IOC_NRSHIFT 
+#define _IOC_NRSHIFT 	(0) 
+#endif
+#ifndef _IOC_TYPESHIFT
+#define _IOC_TYPESHIFT 	(_IOC_NRSHIFT + _IOC_NRBITS) 
+#endif
+#ifndef _IOC_SIZESHIFT
+#define _IOC_SIZESHIFT 	(_IOC_TYPESHIFT + _IOC_TYPEBITS) 
+#endif
+#ifndef _IOC_DIRSHIFT
+#define _IOC_DIRSHIFT 	(_IOC_SIZESHIFT + _IOC_SIZEBITS) 
+#endif 
+
+/*
+ * Direction bits.
+ */
+#ifndef _IOC_NONE
+#define _IOC_NONE (0U) 
+#endif
+#ifndef _IOC_WRITE
+#define _IOC_WRITE (1U) 
+#endif
+#ifndef _IOC_READ
+#define _IOC_READ (2U) 
+#endif 
+
+
+/*
+ * combine the four dir，type，nr，size parameters to one cmd parameter
+ *
+ */
+#ifndef _IOC
+#define _IOC(dir,type,nr,size) \
+       (((dir) << _IOC_DIRSHIFT) | \
+        ((type) << _IOC_TYPESHIFT) | \
+        ((nr) << _IOC_NRSHIFT) | \
+        ((size) << _IOC_SIZESHIFT))
+#endif
+/*
+ * used to create IOCTL cmd 
+ */
+#ifndef _IO
+#define _IO(type,nr)        	_IOC(_IOC_NONE,(type), (nr), 0) 
+#endif
+#ifndef _IOR  
+#define _IOR(type,nr,size)     	_IOC(_IOC_READ,(type), (nr), sizeof(size)) 
+#endif
+#ifndef _IOW
+#define _IOW(type,nr,size)    	_IOC(_IOC_WRITE,(type), (nr), sizeof(size))
+#endif
+#ifndef _IOWR
+#define _IOWR(type,nr,size) 	_IOC(_IOC_READ|_IOC_WRITE, (type), (nr), sizeof(size))
+#endif
+/* 
+ * used to decode ioctl infoations..
+ */
+#ifndef _IOC_DIR
+#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#endif
+#ifndef _IOC_TYPE
+#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#endif
+#ifndef _IOC_NR
+#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#endif
+#ifndef _IOC_SIZE
+#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+#endif 
+/* ...and for the drivers/sound files... */
+#ifndef IOC_IN
+#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT)
+#endif
+#ifndef IOC_OUT
+#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT)
+#endif
+#ifndef IOC_INOUT
+#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#endif
+#ifndef IOCSIZE_MASK
+#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#endif
+#ifndef IOCSIZE_SHIFT
+#define IOCSIZE_SHIFT (_IOC_SIZESHIFT)
+#endif
+
+#ifndef DIV_ROUND_UP
+#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
+#endif
+#ifndef BITS_PER_LONG
+#define BITS_PER_LONG (32)
+#endif
+#ifndef BITS_PER_LONG_LONG
+#define BITS_PER_LONG_LONG (32)
+#endif
+#ifndef BIT
+#define BIT(nr)                 (1UL << (nr))
+#endif
+#ifndef BIT_ULL
+#define BIT_ULL(nr)             (1ULL << (nr))
+#endif
+#ifndef BIT_MASK
+#define BIT_MASK(nr)            (1UL << ((nr) % BITS_PER_LONG))
+#endif
+#ifndef BIT_WORD
+#define BIT_WORD(nr)            ((nr) / BITS_PER_LONG)
+#endif
+#ifndef BIT_ULL_MASK
+#define BIT_ULL_MASK(nr)        (1ULL << ((nr) % BITS_PER_LONG_LONG))
+#endif
+#ifndef BIT_ULL_WORD
+#define BIT_ULL_WORD(nr)        ((nr) / BITS_PER_LONG_LONG)
+#endif
+#ifndef BITS_PER_BYTE
+#define BITS_PER_BYTE           (8)
+#endif
+#ifndef BITS_TO_LONGS
+#define BITS_TO_LONGS(nr)       DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+#endif
+
+/* __ffs to find out the first exist 1 offset, from bit 0 ~ 31 */
+#ifndef ffz
+#define ffz(x)  __ffs(~(x))                     
+#endif
+/* __builtin_constant_p is gcc build-in function to check the parameter is const or not */
+#ifndef small_const_nbits
+#define small_const_nbits(nbits) \
+         (__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG)
+#endif
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	int num = 0;
+
+#if BITS_PER_LONG == 64
+	if ((word & 0xffffffff) == 0) {
+		num += 32;
+		word >>= 32;
+	}
+#endif
+	if ((word & 0xffff) == 0) {                         
+		num += 16;                                      
+		word >>= 16;
+	}
+	if ((word & 0xff) == 0) {                           
+		num += 8;
+		word >>= 8;
+	}
+	if ((word & 0xf) == 0) {
+		num += 4;
+		word >>= 4;
+	}
+	if ((word & 0x3) == 0) {
+		num += 2;
+		word >>= 2;
+	}
+	if ((word & 0x1) == 0)
+		num += 1;
+	
+	return num;                                         
+}
+
+/**
+  * __fls - find last (most-significant) set bit in a long word
+  * @word: the word to search
+  *
+  * Undefined if no set bit exists, so code should check against 0 first.
+  */
+static inline unsigned long __fls(unsigned long word)
+{
+         int num = BITS_PER_LONG - 1;
+ 
+ #if BITS_PER_LONG == 64
+         if (!(word & (~0ul << 32))) {
+                 num -= 32;
+                 word <<= 32;
+         }
+ #endif
+         if (!(word & (~0ul << (BITS_PER_LONG-16)))) {
+                 num -= 16;
+                 word <<= 16;
+         }
+         if (!(word & (~0ul << (BITS_PER_LONG-8)))) {
+                 num -= 8;
+                 word <<= 8;
+         }
+         if (!(word & (~0ul << (BITS_PER_LONG-4)))) {
+                 num -= 4;
+                 word <<= 4;
+         }
+         if (!(word & (~0ul << (BITS_PER_LONG-2)))) {
+                 num -= 2;
+                 word <<= 2;
+         }
+         if (!(word & (~0ul << (BITS_PER_LONG-1))))
+                num -= 1;
+        return num;
+}
+
+/**
+ * test_bit - Determine whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static inline int test_bit(int nr, const volatile unsigned long *addr)
+{
+        return ((1UL << (nr & 31)) & (addr[nr >> 5])) != 0;
+}
+
+
+
+/*
+* Find the first cleared bit in a memory region.
+*/
+static inline unsigned long find_first_zero_bit(
+	const unsigned long *addr, unsigned long size)
+{
+        const unsigned long *p = addr;
+        unsigned long result = 0;
+        unsigned long tmp;
+
+        while (size & ~(BITS_PER_LONG-1)) {
+                if (~(tmp = *(p++)))
+                        goto found;
+                result += BITS_PER_LONG;
+                size -= BITS_PER_LONG;
+        }
+        if (!size)
+                return result;
+
+        tmp = (*p) | (~0UL << size);
+        if (tmp == ~0UL)        /* Are any bits zero? */
+                return result + size;   /* Nope. */
+found:
+
+	return result + ffz(tmp);
+	//tmp = 0;
+	//return result;
+
+}
+
+static inline unsigned long find_next_zero_bit(
+	const unsigned long *addr,unsigned long size, unsigned long offset)
+{
+    const unsigned long *p = addr + BIT_WORD(offset); // offset位于p指向的long地址32位空?
+    unsigned long result = offset & ~(BITS_PER_LONG-1); // offset是第result?4字?
+    unsigned long tmp;
+
+    if (offset >= size)
+        return size;
+    size -= result;                                     // ?整32位整倍?上
+    offset %= BITS_PER_LONG;                            // offset位于32位的第几位
+    if (offset) {                                       // offset不在一?long?据的第0位上,在1-31位中[luther.gliethttp]
+        tmp = *(p++);
+        tmp |= ~0UL >> (BITS_PER_LONG - offset);        // ?0-offset?据填充上1.
+        if (size < BITS_PER_LONG)                       // 不足32bits
+            goto found_first;
+        if (~tmp)                                       // 取非非0?明含有0值
+            goto found_middle;
+        size -= BITS_PER_LONG;                          // 如果上面~tmp等于0,那么?明?*p?据?32位全1.[luther.gliethttp]
+        result += BITS_PER_LONG;
+    }
+    while (size & ~(BITS_PER_LONG-1)) {                 // 好了,?行到?里,我?的offset已??在4字?的第0位上,下面?行
+        if (~(tmp = *(p++)))                            // 4字?快速查?.如果~tmp非0,?明?32位?据中含有0?据,找到.[luther.gliethttp]
+            goto found_middle;
+        result += BITS_PER_LONG;                        // 到下一?4字?空?
+        size -= BITS_PER_LONG;                          // ?少4字??据
+    }
+    if (!size)                                          // size等于0,?明首先size等于4字?整倍?,其次所有?据已?查完,
+        return result;                                  // 所有?据全部?1,?有??0位,result等于size.[luther.gliethttp]
+    tmp = *p;                                           // size不是32位整倍?,?剩几?bit?有?查,???行下面?查工作.[luther.gliethtp]
+
+found_first:
+    tmp |= ~0UL << size;                                // ?在0-size?有效?据,size-31?未使用空?,所以先?size-31置成全1.
+    if (tmp == ~0UL)    /* Are any bits zero? */        // 如果tmp全1,那么?明就?找找1?
+        return result + size;    /* Nope. */             // result+size就等于函??入的??size大小.[luther.gliethttp]
+found_middle:
+    return result + ffz(tmp);                           // 我?在32位?据的0-31中??必定存在0位值,?算他是第几位.[luther.gliethttp]
+}
+
+//int find_next_zero_bit(const void * p, int size, int offset);
+//int find_first_bit(const unsigned long *p, unsigned size);
+//int find_next_bit(const unsigned long *p, int size, int offset);
+/**
+* set_bit - Atomically set a bit in memory
+* @nr: the bit to set
+* @addr: the address to start counting from
+*
+* This function is atomic and may not be reordered.  See __set_bit()
+* if you do not require the atomic guarantees.
+*
+* Note: there are no guarantees that this function will not be reordered
+* on non x86 architectures, so if you are writing portable code,
+* make sure not to rely on its reordering guarantees.
+*
+* Note that @nr may be almost arbitrarily large; this function is not
+* restricted to acting on a single-word quantity.
+*/
+static inline void set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long flags;
+
+	//taskENTER_CRITICAL();
+	_atomic_spin_lock_irqsave(p, flags);
+	*p  |= mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+	//taskEXIT_CRITICAL();
+}
+
+/**
+* clear_bit - Clears a bit in memory
+* @nr: Bit to clear
+* @addr: Address to start counting from
+*
+* clear_bit() is atomic and may not be reordered.  However, it does
+* not contain a memory barrier, so if it is used for locking purposes,
+* you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+* in order to ensure changes are visible on other processors.
+*/
+static inline void clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long flags;
+
+	_atomic_spin_lock_irqsave(p, flags);
+	//taskENTER_CRITICAL();
+	*p &= ~mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+	//taskEXIT_CRITICAL();
+}
+ 
+/**
+* change_bit - Toggle a bit in memory
+* @nr: Bit to change
+* @addr: Address to start counting from
+*
+* change_bit() is atomic and may not be reordered. It may be
+* reordered on other architectures than x86.
+* Note that @nr may be almost arbitrarily large; this function is not
+* restricted to acting on a single-word quantity.
+*/
+static inline void change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long flags;
+
+	//taskENTER_CRITICAL();
+	_atomic_spin_lock_irqsave(p, flags);
+	*p ^= mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+	//taskEXIT_CRITICAL();
+}
+ 
+/**
+* test_and_set_bit - Set a bit and return its old value
+* @nr: Bit to set
+* @addr: Address to count from
+*
+* This operation is atomic and cannot be reordered.
+* It may be reordered on other architectures than x86.
+* It also implies a memory barrier.
+*/
+static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	//unsigned long flags;
+
+	//taskENTER_CRITICAL();
+	
+	_atomic_spin_lock_irqsave(p, flags);
+	old = *p;
+	*p = old | mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+	//taskEXIT_CRITICAL();
+
+	return (old & mask) != 0;
+}
+
+/**
+* test_and_clear_bit - Clear a bit and return its old value
+* @nr: Bit to clear
+* @addr: Address to count from
+*
+* This operation is atomic and cannot be reordered.
+* It can be reorderdered on other architectures other than x86.
+* It also implies a memory barrier.
+*/
+static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	unsigned long flags;
+
+	//taskENTER_CRITICAL();
+	_atomic_spin_lock_irqsave(p, flags);
+	old = *p;
+	*p = old & ~mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+	//taskEXIT_CRITICAL();
+
+	return (old & mask) != 0;
+}
+/**
+* test_and_change_bit - Change a bit and return its old value
+* @nr: Bit to change
+* @addr: Address to count from
+*
+* This operation is atomic and cannot be reordered.
+* It also implies a memory barrier.
+*/
+static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	unsigned long old;
+	unsigned long flags;
+
+	
+	_atomic_spin_lock_irqsave(p, flags);
+	old = *p;
+	*p = old ^ mask;
+	_atomic_spin_unlock_irqrestore(p, flags);
+	
+
+	return (old & mask) != 0;
+}
+
+
+static inline int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
+				const unsigned long *bitmap2, int bits)
+{
+	int k;
+	int nr = BITS_TO_LONGS(bits);
+	unsigned long result = 0;
+
+	for (k = 0; k < nr; k++)
+	result |= (dst[k] = bitmap1[k] & ~bitmap2[k]);
+	return result != 0;
+}
+
+static inline int bitmap_andnot(unsigned long *dst, const unsigned long *src1,
+			const unsigned long *src2, int nbits)
+{
+//	if (small_const_nbits(nbits))
+//		return (*dst = *src1 & ~(*src2)) != 0;
+	return __bitmap_andnot(dst, src1, src2, nbits);
+}
+
+static inline int atomic_inc_return(volatile atomic_t *v)
+{
+         unsigned long flags;
+         int retval;
+         cris_atomic_save(v, flags);
+         retval = ++(v->counter);
+         cris_atomic_restore(v, flags);
+         return retval;
+}
+
+typedef __u16 __le16;
+typedef __u16 __be16;
+typedef __u32 __le32;
+typedef __u32 __be32;
+typedef __u64 __le64;
+typedef __u64 __be64; 
+typedef __u16 __sum16;
+typedef __u32 __wsum;
+
+#ifndef __GFP_WAIT
+#define __GFP_WAIT             					(0x10u)
+#endif
+#ifndef __GFP_HIGH
+#define __GFP_HIGH             					(0x20u)
+#endif
+#ifndef __GFP_IO
+#define __GFP_IO               					(0x40u)
+#endif
+#ifndef __GFP_FS
+#define __GFP_FS               					(0x80u)
+#endif
+#ifndef GFP_NOIO
+#define GFP_NOIO 						(0x10u)
+#endif
+#ifndef __GFP_NOWARN
+#define __GFP_NOWARN          					(0x200u)
+#endif
+#ifndef GFP_KERNEL
+#define GFP_KERNEL	(__GFP_WAIT | __GFP_IO | __GFP_FS)
+#endif
+
+#ifndef copy_from_user
+#define copy_from_user(to, from, sz) _memcpy((to), (from), (sz))
+#endif
+#ifndef copy_to_user
+#define copy_to_user(to, from, sz)   _memcpy((to), (from), (sz))
+#endif
+
+#if 0 /*comment since we are not using polling*/
+/* These are specified by iBCS2 */
+#ifndef POLLIN 
+#define POLLIN          0x0001
+#endif
+#ifndef POLLPRI
+#define POLLPRI         0x0002
+#endif
+#ifndef POLLOUT
+#define POLLOUT         0x0004
+#endif
+#ifndef POLLERR
+#define POLLERR         0x0008
+#endif
+#ifndef POLLHUP
+#define POLLHUP         0x0010
+#endif
+#ifndef POLLNVAL
+#define POLLNVAL        0x0020
+#endif 
+/* The rest seem to be more-or-less nonstandard. Check them! */
+#ifndef POLLRDNORM
+#define POLLRDNORM      0x0040
+#endif
+#ifndef POLLRDBAND 
+#define POLLRDBAND      0x0080
+#endif
+#ifndef POLLWRNORM
+#define POLLWRNORM      0x0100
+#endif
+#ifndef POLLWRBAND
+#define POLLWRBAND      0x0200
+#endif
+#ifndef POLLMSG
+#define POLLMSG         0x0400
+#endif
+#ifndef POLLREMOVE
+#define POLLREMOVE      0x1000
+#endif
+#ifndef POLLRDHUP
+#define POLLRDHUP       0x2000
+#endif 
+#ifndef POLLFREE
+#define POLLFREE        0x4000  /* currently only for epoll */
+#endif
+#ifndef POLL_BUSY_LOOP
+#define POLL_BUSY_LOOP  0x8000
+#endif
+#endif
+
+struct __wait_queue_head {
+         _Sema lock;
+         struct list_head        task_list;
+};
+
+typedef struct __wait_queue_head wait_queue_head_t;
+
+static inline void __init_waitqueue_head(wait_queue_head_t *q)
+{
+         //spin_lock_init(&q->lock);
+	 RtlInitSema(&q->lock,0);
+	 INIT_LIST_HEAD(&q->task_list);
+}
+#ifndef init_waitqueue_head
+#define init_waitqueue_head(q)      \
+do {                                \
+ 	__init_waitqueue_head((q)); \
+} while (0)
+#endif
+#ifndef DEFAULT_POLLMASK
+#define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM)
+#endif
+
+#endif /*_V4L2_OSDEP_H_*/

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2-subdev.h

@@ -0,0 +1,700 @@
+/*
+    V4L2 sub-device support header.
+
+    Copyright (C) 2008  Hans Verkuil <hverkuil@xs4all.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _V4L2_SUBDEV_H
+#define _V4L2_SUBDEV_H
+
+#if 0
+#include <linux/types.h>
+#endif
+
+#include "v4l2-subdev.h"
+#include "media-entity.h"
+#include "v4l2-async.h"
+#include "v4l2-common.h"
+#include "v4l2-dev.h"
+#include "v4l2-fh.h"
+#include "v4l2-mediabus.h"
+
+
+/* generic v4l2_device notify callback notification values */
+#define V4L2_SUBDEV_IR_RX_NOTIFY		_IOW('v', 0, u32)
+#define V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ	0x00000001
+#define V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED	0x00000002
+#define V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN	0x00000004
+#define V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN	0x00000008
+
+#define V4L2_SUBDEV_IR_TX_NOTIFY		_IOW('v', 1, u32)
+#define V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ	0x00000001
+
+struct v4l2_device;
+struct v4l2_ctrl_handler;
+struct v4l2_event_subscription;
+struct v4l2_fh;
+struct v4l2_subdev;
+struct v4l2_subdev_fh;
+//struct tuner_setup;
+struct v4l2_mbus_frame_desc;
+
+/* decode_vbi_line */
+struct v4l2_decode_vbi_line {
+	u32 is_second_field;	/* Set to 0 for the first (odd) field,
+				   set to 1 for the second (even) field. */
+	u8 *p; 			/* Pointer to the sliced VBI data from the decoder.
+				   On exit points to the start of the payload. */
+	u32 line;		/* Line number of the sliced VBI data (1-23) */
+	u32 type;		/* VBI service type (V4L2_SLICED_*). 0 if no service found */
+};
+
+/* Sub-devices are devices that are connected somehow to the main bridge
+   device. These devices are usually audio/video muxers/encoders/decoders or
+   sensors and webcam controllers.
+
+   Usually these devices are controlled through an i2c bus, but other busses
+   may also be used.
+
+   The v4l2_subdev struct provides a way of accessing these devices in a
+   generic manner. Most operations that these sub-devices support fall in
+   a few categories: core ops, audio ops, video ops and tuner ops.
+
+   More categories can be added if needed, although this should remain a
+   limited set (no more than approx. 8 categories).
+
+   Each category has its own set of ops that subdev drivers can implement.
+
+   A subdev driver can leave the pointer to the category ops NULL if
+   it does not implement them (e.g. an audio subdev will generally not
+   implement the video category ops). The exception is the core category:
+   this must always be present.
+
+   These ops are all used internally so it is no problem to change, remove
+   or add ops or move ops from one to another category. Currently these
+   ops are based on the original ioctls, but since ops are not limited to
+   one argument there is room for improvement here once all i2c subdev
+   drivers are converted to use these ops.
+ */
+
+/* Core ops: it is highly recommended to implement at least these ops:
+
+   log_status
+   g_register
+   s_register
+
+   This provides basic debugging support.
+
+   The ioctl ops is meant for generic ioctl-like commands. Depending on
+   the use-case it might be better to use subdev-specific ops (currently
+   not yet implemented) since ops provide proper type-checking.
+ */
+
+/* Subdevice external IO pin configuration */
+#define V4L2_SUBDEV_IO_PIN_DISABLE	(1 << 0) /* ENABLE assumed */
+#define V4L2_SUBDEV_IO_PIN_OUTPUT	(1 << 1)
+#define V4L2_SUBDEV_IO_PIN_INPUT	(1 << 2)
+#define V4L2_SUBDEV_IO_PIN_SET_VALUE	(1 << 3) /* Set output value */
+#define V4L2_SUBDEV_IO_PIN_ACTIVE_LOW	(1 << 4) /* ACTIVE HIGH assumed */
+
+struct v4l2_subdev_io_pin_config {
+	u32 flags;	/* V4L2_SUBDEV_IO_PIN_* flags for this pin's config */
+	u8 pin;		/* Chip external IO pin to configure */
+	u8 function;	/* Internal signal pad/function to route to IO pin */
+	u8 value;	/* Initial value for pin - e.g. GPIO output value */
+	u8 strength;	/* Pin drive strength */
+};
+
+/*
+   s_io_pin_config: configure one or more chip I/O pins for chips that
+	multiplex different internal signal pads out to IO pins.  This function
+	takes a pointer to an array of 'n' pin configuration entries, one for
+	each pin being configured.  This function could be called at times
+	other than just subdevice initialization.
+
+   init: initialize the sensor registers to some sort of reasonable default
+	values. Do not use for new drivers and should be removed in existing
+	drivers.
+
+   load_fw: load firmware.
+
+   reset: generic reset command. The argument selects which subsystems to
+	reset. Passing 0 will always reset the whole chip. Do not use for new
+	drivers without discussing this first on the linux-media mailinglist.
+	There should be no reason normally to reset a device.
+
+   s_gpio: set GPIO pins. Very simple right now, might need to be extended with
+	a direction argument if needed.
+
+   s_power: puts subdevice in power saving mode (on == 0) or normal operation
+	mode (on == 1).
+
+   interrupt_service_routine: Called by the bridge chip's interrupt service
+	handler, when an interrupt status has be raised due to this subdev,
+	so that this subdev can handle the details.  It may schedule work to be
+	performed later.  It must not sleep.  *Called from an IRQ context*.
+ */
+struct v4l2_subdev_core_ops {
+	int (*log_status)(struct v4l2_subdev *sd);
+	int (*s_io_pin_config)(struct v4l2_subdev *sd, size_t n,
+				      struct v4l2_subdev_io_pin_config *pincfg);
+	int (*init)(struct v4l2_subdev *sd, u32 val);
+	int (*load_fw)(struct v4l2_subdev *sd);
+	int (*reset)(struct v4l2_subdev *sd, u32 val);
+	int (*s_gpio)(struct v4l2_subdev *sd, u32 val);
+	int (*queryctrl)(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc);
+	int (*g_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+	int (*s_ctrl)(struct v4l2_subdev *sd, struct v4l2_control *ctrl);
+	int (*g_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
+	int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
+	int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
+	int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
+	int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm);
+	int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
+	long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
+	int (*s_register)(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg);
+#endif
+	int (*s_power)(struct v4l2_subdev *sd, int on);
+	int (*interrupt_service_routine)(struct v4l2_subdev *sd,
+						u32 status, bool *handled);
+	int (*subscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+			       struct v4l2_event_subscription *sub);
+	int (*unsubscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+				 struct v4l2_event_subscription *sub);
+};
+
+/* s_radio: v4l device was opened in radio mode.
+
+   g_frequency: freq->type must be filled in. Normally done by video_ioctl2
+	or the bridge driver.
+
+   g_tuner:
+   s_tuner: vt->type must be filled in. Normally done by video_ioctl2 or the
+	bridge driver.
+
+   s_type_addr: sets tuner type and its I2C addr.
+
+   s_config: sets tda9887 specific stuff, like port1, port2 and qss
+ */
+struct v4l2_subdev_tuner_ops {
+	int (*s_radio)(struct v4l2_subdev *sd);
+	int (*s_frequency)(struct v4l2_subdev *sd, const struct v4l2_frequency *freq);
+	int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
+	int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt);
+	int (*s_tuner)(struct v4l2_subdev *sd, const struct v4l2_tuner *vt);
+	int (*g_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm);
+	int (*s_modulator)(struct v4l2_subdev *sd, const struct v4l2_modulator *vm);
+        //edit by Ian 
+	//int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type);
+	//int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config);
+};
+
+/* s_clock_freq: set the frequency (in Hz) of the audio clock output.
+	Used to slave an audio processor to the video decoder, ensuring that
+	audio and video remain synchronized. Usual values for the frequency
+	are 48000, 44100 or 32000 Hz. If the frequency is not supported, then
+	-EINVAL is returned.
+
+   s_i2s_clock_freq: sets I2S speed in bps. This is used to provide a standard
+	way to select I2S clock used by driving digital audio streams at some
+	board designs. Usual values for the frequency are 1024000 and 2048000.
+	If the frequency is not supported, then -EINVAL is returned.
+
+   s_routing: used to define the input and/or output pins of an audio chip,
+	and any additional configuration data.
+	Never attempt to use user-level input IDs (e.g. Composite, S-Video,
+	Tuner) at this level. An i2c device shouldn't know about whether an
+	input pin is connected to a Composite connector, become on another
+	board or platform it might be connected to something else entirely.
+	The calling driver is responsible for mapping a user-level input to
+	the right pins on the i2c device.
+ */
+struct v4l2_subdev_audio_ops {
+	int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
+	int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq);
+	int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
+	int (*s_stream)(struct v4l2_subdev *sd, int enable);
+};
+
+/* Indicates the @length field specifies maximum data length. */
+#define V4L2_MBUS_FRAME_DESC_FL_LEN_MAX		(1U << 0)
+/* Indicates user defined data format, i.e. non standard frame format. */
+#define V4L2_MBUS_FRAME_DESC_FL_BLOB		(1U << 1)
+
+/**
+ * struct v4l2_mbus_frame_desc_entry - media bus frame description structure
+ * @flags: V4L2_MBUS_FRAME_DESC_FL_* flags
+ * @pixelcode: media bus pixel code, valid if FRAME_DESC_FL_BLOB is not set
+ * @length: number of octets per frame, valid for compressed or unspecified
+ *          formats
+ */
+struct v4l2_mbus_frame_desc_entry {
+	u16 flags;
+	u32 pixelcode;
+	u32 length;
+};
+
+#define V4L2_FRAME_DESC_ENTRY_MAX	4
+
+/**
+ * struct v4l2_mbus_frame_desc - media bus data frame description
+ * @entry: frame descriptors array
+ * @num_entries: number of entries in @entry array
+ */
+struct v4l2_mbus_frame_desc {
+	struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX];
+	unsigned short num_entries;
+};
+
+/*
+   s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
+	video input devices.
+
+   g_std_output: get current standard for video OUTPUT devices. This is ignored
+	by video input devices.
+
+   g_tvnorms_output: get v4l2_std_id with all standards supported by video
+	OUTPUT device. This is ignored by video input devices.
+
+   s_crystal_freq: sets the frequency of the crystal used to generate the
+	clocks in Hz. An extra flags field allows device specific configuration
+	regarding clock frequency dividers, etc. If not used, then set flags
+	to 0. If the frequency is not supported, then -EINVAL is returned.
+
+   g_input_status: get input status. Same as the status field in the v4l2_input
+	struct.
+
+   s_routing: see s_routing in audio_ops, except this version is for video
+	devices.
+
+   s_dv_timings(): Set custom dv timings in the sub device. This is used
+	when sub device is capable of setting detailed timing information
+	in the hardware to generate/detect the video signal.
+
+   g_dv_timings(): Get custom dv timings in the sub device.
+
+   enum_mbus_fmt: enumerate pixel formats, provided by a video data source
+
+   g_mbus_fmt: get the current pixel format, provided by a video data source
+
+   try_mbus_fmt: try to set a pixel format on a video data source
+
+   s_mbus_fmt: set a pixel format on a video data source
+
+   g_mbus_config: get supported mediabus configurations
+
+   s_mbus_config: set a certain mediabus configuration. This operation is added
+	for compatibility with soc-camera drivers and should not be used by new
+	software.
+
+   s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev
+	can adjust @size to a lower value and must not write more data to the
+	buffer starting at @data than the original value of @size.
+ */
+struct v4l2_subdev_video_ops {
+	int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
+	int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags);
+	int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std);
+	int (*g_std_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
+	int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std);
+	int (*g_tvnorms_output)(struct v4l2_subdev *sd, v4l2_std_id *std);
+	int (*g_input_status)(struct v4l2_subdev *sd, u32 *status);
+	int (*s_stream)(struct v4l2_subdev *sd, int enable);
+	int (*cropcap)(struct v4l2_subdev *sd, struct v4l2_cropcap *cc);
+	int (*g_crop)(struct v4l2_subdev *sd, struct v4l2_crop *crop);
+	int (*s_crop)(struct v4l2_subdev *sd, const struct v4l2_crop *crop);
+	int (*g_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
+	int (*s_parm)(struct v4l2_subdev *sd, struct v4l2_streamparm *param);
+// edit by Ian
+#if 0
+	int (*g_frame_interval)(struct v4l2_subdev *sd,
+				struct v4l2_subdev_frame_interval *interval);
+	int (*s_frame_interval)(struct v4l2_subdev *sd,
+				struct v4l2_subdev_frame_interval *interval);
+#endif	
+        int (*enum_framesizes)(struct v4l2_subdev *sd, struct v4l2_frmsizeenum *fsize);
+	int (*enum_frameintervals)(struct v4l2_subdev *sd, struct v4l2_frmivalenum *fival);
+	int (*s_dv_timings)(struct v4l2_subdev *sd,
+			struct v4l2_dv_timings *timings);
+	int (*g_dv_timings)(struct v4l2_subdev *sd,
+			struct v4l2_dv_timings *timings);
+	int (*enum_dv_timings)(struct v4l2_subdev *sd,
+			struct v4l2_enum_dv_timings *timings);
+	int (*query_dv_timings)(struct v4l2_subdev *sd,
+			struct v4l2_dv_timings *timings);
+	int (*dv_timings_cap)(struct v4l2_subdev *sd,
+			struct v4l2_dv_timings_cap *cap);
+#if 0
+	int (*enum_mbus_fmt)(struct v4l2_subdev *sd, unsigned int index,
+			     enum v4l2_mbus_pixelcode *code);
+	int (*enum_mbus_fsizes)(struct v4l2_subdev *sd,
+			     struct v4l2_frmsizeenum *fsize);
+	int (*g_mbus_fmt)(struct v4l2_subdev *sd,
+			  struct v4l2_mbus_framefmt *fmt);
+	int (*try_mbus_fmt)(struct v4l2_subdev *sd,
+			    struct v4l2_mbus_framefmt *fmt);
+	int (*s_mbus_fmt)(struct v4l2_subdev *sd,
+			  struct v4l2_mbus_framefmt *fmt);
+	int (*g_mbus_config)(struct v4l2_subdev *sd,
+			     struct v4l2_mbus_config *cfg);
+	int (*s_mbus_config)(struct v4l2_subdev *sd,
+			     const struct v4l2_mbus_config *cfg);
+#endif
+	int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf,
+			   unsigned int *size);
+};
+
+/*
+   decode_vbi_line: video decoders that support sliced VBI need to implement
+	this ioctl. Field p of the v4l2_sliced_vbi_line struct is set to the
+	start of the VBI data that was generated by the decoder. The driver
+	then parses the sliced VBI data and sets the other fields in the
+	struct accordingly. The pointer p is updated to point to the start of
+	the payload which can be copied verbatim into the data field of the
+	v4l2_sliced_vbi_data struct. If no valid VBI data was found, then the
+	type field is set to 0 on return.
+
+   s_vbi_data: used to generate VBI signals on a video signal.
+	v4l2_sliced_vbi_data is filled with the data packets that should be
+	output. Note that if you set the line field to 0, then that VBI signal
+	is disabled. If no valid VBI data was found, then the type field is
+	set to 0 on return.
+
+   g_vbi_data: used to obtain the sliced VBI packet from a readback register.
+	Not all video decoders support this. If no data is available because
+	the readback register contains invalid or erroneous data -EIO is
+	returned. Note that you must fill in the 'id' member and the 'field'
+	member (to determine whether CC data from the first or second field
+	should be obtained).
+
+   s_raw_fmt: setup the video encoder/decoder for raw VBI.
+
+   g_sliced_fmt: retrieve the current sliced VBI settings.
+
+   s_sliced_fmt: setup the sliced VBI settings.
+ */
+struct v4l2_subdev_vbi_ops {
+	int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line);
+	int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data);
+	int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data);
+	int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap);
+	int (*s_raw_fmt)(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt);
+	int (*g_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
+	int (*s_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
+};
+
+/**
+ * struct v4l2_subdev_sensor_ops - v4l2-subdev sensor operations
+ * @g_skip_top_lines: number of lines at the top of the image to be skipped.
+ *		      This is needed for some sensors, which always corrupt
+ *		      several top lines of the output image, or which send their
+ *		      metadata in them.
+ * @g_skip_frames: number of frames to skip at stream start. This is needed for
+ *		   buggy sensors that generate faulty frames when they are
+ *		   turned on.
+ */
+struct v4l2_subdev_sensor_ops {
+	int (*g_skip_top_lines)(struct v4l2_subdev *sd, u32 *lines);
+	int (*g_skip_frames)(struct v4l2_subdev *sd, u32 *frames);
+};
+
+/*
+   [rt]x_g_parameters: Get the current operating parameters and state of the
+	the IR receiver or transmitter.
+
+   [rt]x_s_parameters: Set the current operating parameters and state of the
+	the IR receiver or transmitter.  It is recommended to call
+	[rt]x_g_parameters first to fill out the current state, and only change
+	the fields that need to be changed.  Upon return, the actual device
+	operating parameters and state will be returned.  Note that hardware
+	limitations may prevent the actual settings from matching the requested
+	settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz
+	was requested.  An exception is when the shutdown parameter is true.
+	The last used operational parameters will be returned, but the actual
+	state of the hardware be different to minimize power consumption and
+	processing when shutdown is true.
+
+   rx_read: Reads received codes or pulse width data.
+	The semantics are similar to a non-blocking read() call.
+
+   tx_write: Writes codes or pulse width data for transmission.
+	The semantics are similar to a non-blocking write() call.
+ */
+
+enum v4l2_subdev_ir_mode {
+	V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* uses struct ir_raw_event records */
+};
+
+struct v4l2_subdev_ir_parameters {
+	/* Either Rx or Tx */
+	unsigned int bytes_per_data_element; /* of data in read or write call */
+	enum v4l2_subdev_ir_mode mode;
+
+	bool enable;
+	bool interrupt_enable;
+	bool shutdown; /* true: set hardware to low/no power, false: normal */
+
+	bool modulation;           /* true: uses carrier, false: baseband */
+	u32 max_pulse_width;       /* ns,      valid only for baseband signal */
+	unsigned int carrier_freq; /* Hz,      valid only for modulated signal*/
+	unsigned int duty_cycle;   /* percent, valid only for modulated signal*/
+	bool invert_level;	   /* invert signal level */
+
+	/* Tx only */
+	bool invert_carrier_sense; /* Send 0/space as a carrier burst */
+
+	/* Rx only */
+	u32 noise_filter_min_width;       /* ns, min time of a valid pulse */
+	unsigned int carrier_range_lower; /* Hz, valid only for modulated sig */
+	unsigned int carrier_range_upper; /* Hz, valid only for modulated sig */
+	u32 resolution;                   /* ns */
+};
+
+struct v4l2_subdev_ir_ops {
+	/* Receiver */
+	int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count,
+				ssize_t *num);
+
+	int (*rx_g_parameters)(struct v4l2_subdev *sd,
+				struct v4l2_subdev_ir_parameters *params);
+	int (*rx_s_parameters)(struct v4l2_subdev *sd,
+				struct v4l2_subdev_ir_parameters *params);
+
+	/* Transmitter */
+	int (*tx_write)(struct v4l2_subdev *sd, u8 *buf, size_t count,
+				ssize_t *num);
+
+	int (*tx_g_parameters)(struct v4l2_subdev *sd,
+				struct v4l2_subdev_ir_parameters *params);
+	int (*tx_s_parameters)(struct v4l2_subdev *sd,
+				struct v4l2_subdev_ir_parameters *params);
+};
+
+/**
+ * struct v4l2_subdev_pad_ops - v4l2-subdev pad level operations
+ * @get_frame_desc: get the current low level media bus frame parameters.
+ * @get_frame_desc: set the low level media bus frame parameters, @fd array
+ *                  may be adjusted by the subdev driver to device capabilities.
+ */
+struct v4l2_subdev_pad_ops {
+
+#if  0
+	int (*enum_mbus_code)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			      struct v4l2_subdev_mbus_code_enum *code);
+	int (*enum_frame_size)(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_fh *fh,
+			       struct v4l2_subdev_frame_size_enum *fse);
+	int (*enum_frame_interval)(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_fh *fh,
+				   struct v4l2_subdev_frame_interval_enum *fie);
+	int (*get_fmt)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+		       struct v4l2_subdev_format *format);
+	int (*set_fmt)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+		       struct v4l2_subdev_format *format);
+	int (*set_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+		       struct v4l2_subdev_crop *crop);
+	int (*get_crop)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+		       struct v4l2_subdev_crop *crop);
+	int (*get_selection)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_selection *sel);
+	int (*set_selection)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+			     struct v4l2_subdev_selection *sel);
+	int (*get_edid)(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid);
+	int (*set_edid)(struct v4l2_subdev *sd, struct v4l2_subdev_edid *edid);
+#ifdef CONFIG_MEDIA_CONTROLLER
+	int (*link_validate)(struct v4l2_subdev *sd, struct media_link *link,
+			     struct v4l2_subdev_format *source_fmt,
+			     struct v4l2_subdev_format *sink_fmt);
+#endif /* CONFIG_MEDIA_CONTROLLER */
+#endif
+	int (*get_frame_desc)(struct v4l2_subdev *sd, unsigned int pad,
+			      struct v4l2_mbus_frame_desc *fd);
+	int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad,
+			      struct v4l2_mbus_frame_desc *fd);
+};
+
+struct v4l2_subdev_ops {
+	const struct v4l2_subdev_core_ops	*core;
+	const struct v4l2_subdev_tuner_ops	*tuner;
+	const struct v4l2_subdev_audio_ops	*audio;
+	const struct v4l2_subdev_video_ops	*video;
+	const struct v4l2_subdev_vbi_ops	*vbi;
+	const struct v4l2_subdev_ir_ops		*ir;
+	const struct v4l2_subdev_sensor_ops	*sensor;
+	const struct v4l2_subdev_pad_ops	*pad;
+};
+
+/*
+ * Internal ops. Never call this from drivers, only the v4l2 framework can call
+ * these ops.
+ *
+ * registered: called when this subdev is registered. When called the v4l2_dev
+ *	field is set to the correct v4l2_device.
+ *
+ * unregistered: called when this subdev is unregistered. When called the
+ *	v4l2_dev field is still set to the correct v4l2_device.
+ *
+ * open: called when the subdev device node is opened by an application.
+ *
+ * close: called when the subdev device node is closed.
+ */
+struct v4l2_subdev_internal_ops {
+	int (*registered)(struct v4l2_subdev *sd);
+	void (*unregistered)(struct v4l2_subdev *sd);
+	int (*open)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh);
+	int (*close)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh);
+};
+
+#define V4L2_SUBDEV_NAME_SIZE 32
+
+/* Set this flag if this subdev is a i2c device. */
+#define V4L2_SUBDEV_FL_IS_I2C			(1U << 0)
+/* Set this flag if this subdev is a spi device. */
+#define V4L2_SUBDEV_FL_IS_SPI			(1U << 1)
+/* Set this flag if this subdev needs a device node. */
+#define V4L2_SUBDEV_FL_HAS_DEVNODE		(1U << 2)
+/* Set this flag if this subdev generates events. */
+#define V4L2_SUBDEV_FL_HAS_EVENTS		(1U << 3)
+
+/* Each instance of a subdev driver should create this struct, either
+   stand-alone or embedded in a larger struct.
+ */
+struct v4l2_subdev {
+#if defined(CONFIG_MEDIA_CONTROLLER)
+	struct media_entity entity;
+#endif
+	struct list_head list;
+	//struct module *owner;
+	u32 flags;
+	struct v4l2_device *v4l2_dev;
+	const struct v4l2_subdev_ops *ops;
+	/* Never call these internal ops from within a sub_dev driver! */
+	const struct v4l2_subdev_internal_ops *internal_ops;
+	/* The control handler of this subdev. May be NULL. */
+	struct v4l2_ctrl_handler *ctrl_handler;
+	/* name must be unique */
+	char name[V4L2_SUBDEV_NAME_SIZE];
+	/* can be used to group similar subdevs, value is driver-specific */
+	u32 grp_id;
+	/* pointer to private data */
+	void *dev_priv;
+	void *host_priv;
+	/* subdev device node */
+	struct video_device *devnode;
+	/* pointer to the physical device, if any */
+	//struct device *dev;
+	const char *dev_init_name; /* initial name of the device */
+	void *dev_prive_date;
+	
+	/* Links this subdev to a global subdev_list or @notifier->done list. */
+	struct list_head async_list;
+	/* Pointer to respective struct v4l2_async_subdev. */
+	struct v4l2_async_subdev *asd;
+	/* Pointer to the managing notifier. */
+	struct v4l2_async_notifier *notifier;
+};
+
+#define media_entity_to_v4l2_subdev(ent) \
+	container_of(ent, struct v4l2_subdev, entity)
+#define vdev_to_v4l2_subdev(vdev) \
+	((struct v4l2_subdev *)video_get_drvdata(vdev))
+
+/*
+ * Used for storing subdev information per file handle
+ */
+struct v4l2_subdev_fh {
+	struct v4l2_fh vfh;
+#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
+	struct {
+		struct v4l2_mbus_framefmt try_fmt;
+		struct v4l2_rect try_crop;
+		struct v4l2_rect try_compose;
+	} *pad;
+#endif
+};
+
+#define to_v4l2_subdev_fh(fh)	\
+	container_of(fh, struct v4l2_subdev_fh, vfh)
+
+#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
+#define __V4L2_SUBDEV_MK_GET_TRY(rtype, fun_name, field_name)		\
+	static inline struct rtype *					\
+	v4l2_subdev_get_try_##fun_name(struct v4l2_subdev_fh *fh,	\
+				       unsigned int pad)		\
+	{								\
+		BUG_ON(unlikely(pad >= vdev_to_v4l2_subdev(		\
+				fh->vfh.vdev)->entity.num_pads)); \
+		return &fh->pad[pad].field_name;			\
+	}
+
+__V4L2_SUBDEV_MK_GET_TRY(v4l2_mbus_framefmt, format, try_fmt)
+__V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, crop, try_compose)
+__V4L2_SUBDEV_MK_GET_TRY(v4l2_rect, compose, try_compose)
+#endif
+
+extern const struct v4l2_file_operations v4l2_subdev_fops;
+
+static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p)
+{
+	sd->dev_priv = p;
+}
+
+static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd)
+{
+	return sd->dev_priv;
+}
+
+static inline void v4l2_set_subdev_hostdata(struct v4l2_subdev *sd, void *p)
+{
+	sd->host_priv = p;
+}
+
+static inline void *v4l2_get_subdev_hostdata(const struct v4l2_subdev *sd)
+{
+	return sd->host_priv;
+}
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+int v4l2_subdev_link_validate_default(struct v4l2_subdev *sd,
+				      struct media_link *link,
+				      struct v4l2_subdev_format *source_fmt,
+				      struct v4l2_subdev_format *sink_fmt);
+int v4l2_subdev_link_validate(struct media_link *link);
+#endif /* CONFIG_MEDIA_CONTROLLER */
+void v4l2_subdev_init(struct v4l2_subdev *sd,
+		      const struct v4l2_subdev_ops *ops);
+
+/* Call an ops of a v4l2_subdev, doing the right checks against
+   NULL pointers.
+
+   Example: err = v4l2_subdev_call(sd, core, s_std, norm);
+ */
+#define v4l2_subdev_call(sd, o, f, args...)				\
+	(!(sd) ? -ENODEV : (((sd)->ops->o && (sd)->ops->o->f) ?	\
+		(sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD))
+
+/* Send a notification to v4l2_device. */
+#define v4l2_subdev_notify(sd, notification, arg)			   \
+	((!(sd) || !(sd)->v4l2_dev || !(sd)->v4l2_dev->notify) ? -ENODEV : \
+	 (sd)->v4l2_dev->notify((sd), (notification), (arg)))
+
+#define v4l2_subdev_has_op(sd, o, f) \
+	((sd)->ops->o && (sd)->ops->o->f)
+
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2_driver.h

@@ -0,0 +1,9 @@
+
+#ifndef V4L2_DRIVER_H
+#define V4L2_DRIVER_H											/*structure needed for video caputure*/
+
+#include <platform/platform_stdlib.h>
+#include "dlist.h"
+#include "basic_types.h"
+
+#endif  //V4L2_DRIVER_H

RTL00_SDKV35a/component/common/video/v4l2/inc/v4l2_intf.h

@@ -0,0 +1,24 @@
+#ifndef _V4L2_INTF_H_
+#define _V4L2_INTF_H_
+
+#define VIDEO_NUM_DEVICES	4//should be aligned with value in v4l2-dev.c
+
+typedef enum _streaming_state streaming_state;
+enum _streaming_state {
+    STREAMING_OFF = 0,
+    STREAMING_ON = 1,
+    STREAMING_PAUSED = 2,
+    STREAMING_READY = 3,
+};
+
+long v4l_usr_ioctl(int fd, unsigned int cmd, void *arg);
+int v4l_dev_open();
+void v4l_dev_release();
+void stop_capturing();
+int start_capturing();
+void uninit_v4l2_device ();
+int init_v4l2_device ();
+int v4l_set_param(u32 format_type, int *width, int *height, int *frame_rate, int *compression_ratio);
+int v4l_getset_usb_ctrl(u8 bRequestType, u8 bRequest, u16 wValue, u16 wIndex, u16 wLength, void *data, int timeout, int set);
+extern void spec_v4l2_probe(); 
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/videobuf2-core.h

@@ -0,0 +1,522 @@
+/*
+ * videobuf2-core.h - V4L2 driver helper framework
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * Author: Pawel Osciak <pawel@osciak.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+#ifndef _MEDIA_VIDEOBUF2_CORE_H
+#define _MEDIA_VIDEOBUF2_CORE_H
+#if 0
+#include <linux/mm_types.h>
+#include <linux/mutex.h>
+#include <linux/poll.h>
+#include <linux/videodev2.h>
+#include <linux/dma-buf.h>
+#endif
+#include "v4l2-osdep.h"
+#include "videodev2.h"
+
+
+typedef int _LOCK_T;
+struct vb2_alloc_ctx;
+struct vb2_fileio_data;
+
+/**
+ * struct vb2_mem_ops - memory handling/memory allocator operations
+ * @alloc:	allocate video memory and, optionally, allocator private data,
+ *		return NULL on failure or a pointer to allocator private,
+ *		per-buffer data on success; the returned private structure
+ *		will then be passed as buf_priv argument to other ops in this
+ *		structure. Additional gfp_flags to use when allocating the
+ *		are also passed to this operation. These flags are from the
+ *		gfp_flags field of vb2_queue.
+ * @put:	inform the allocator that the buffer will no longer be used;
+ *		usually will result in the allocator freeing the buffer (if
+ *		no other users of this buffer are present); the buf_priv
+ *		argument is the allocator private per-buffer structure
+ *		previously returned from the alloc callback
+ * @get_userptr: acquire userspace memory for a hardware operation; used for
+ *		 USERPTR memory types; vaddr is the address passed to the
+ *		 videobuf layer when queuing a video buffer of USERPTR type;
+ *		 should return an allocator private per-buffer structure
+ *		 associated with the buffer on success, NULL on failure;
+ *		 the returned private structure will then be passed as buf_priv
+ *		 argument to other ops in this structure
+ * @put_userptr: inform the allocator that a USERPTR buffer will no longer
+ *		 be used
+ * @attach_dmabuf: attach a shared struct dma_buf for a hardware operation;
+ *		   used for DMABUF memory types; alloc_ctx is the alloc context
+ *		   dbuf is the shared dma_buf; returns NULL on failure;
+ *		   allocator private per-buffer structure on success;
+ *		   this needs to be used for further accesses to the buffer
+ * @detach_dmabuf: inform the exporter of the buffer that the current DMABUF
+ *		   buffer is no longer used; the buf_priv argument is the
+ *		   allocator private per-buffer structure previously returned
+ *		   from the attach_dmabuf callback
+ * @map_dmabuf: request for access to the dmabuf from allocator; the allocator
+ *		of dmabuf is informed that this driver is going to use the
+ *		dmabuf
+ * @unmap_dmabuf: releases access control to the dmabuf - allocator is notified
+ *		  that this driver is done using the dmabuf for now
+ * @prepare:	called every time the buffer is passed from userspace to the
+ *		driver, useful for cache synchronisation, optional
+ * @finish:	called every time the buffer is passed back from the driver
+ *		to the userspace, also optional
+ * @vaddr:	return a kernel virtual address to a given memory buffer
+ *		associated with the passed private structure or NULL if no
+ *		such mapping exists
+ * @cookie:	return allocator specific cookie for a given memory buffer
+ *		associated with the passed private structure or NULL if not
+ *		available
+ * @num_users:	return the current number of users of a memory buffer;
+ *		return 1 if the videobuf layer (or actually the driver using
+ *		it) is the only user
+ * @mmap:	setup a userspace mapping for a given memory buffer under
+ *		the provided virtual memory region
+ *
+ * Required ops for USERPTR types: get_userptr, put_userptr.
+ * Required ops for MMAP types: alloc, put, num_users, mmap.
+ * Required ops for read/write access types: alloc, put, num_users, vaddr
+ * Required ops for DMABUF types: attach_dmabuf, detach_dmabuf, map_dmabuf,
+ *				  unmap_dmabuf.
+ */
+struct vb2_mem_ops {
+	void		*(*alloc)(void *alloc_ctx, unsigned long size, gfp_t gfp_flags);
+	void		(*put)(void *buf_priv);
+	struct dma_buf *(*get_dmabuf)(void *buf_priv);
+
+	void		*(*get_userptr)(void *alloc_ctx, unsigned long vaddr,
+					unsigned long size, int write);
+	void		(*put_userptr)(void *buf_priv);
+
+	void		(*prepare)(void *buf_priv);
+	void		(*finish)(void *buf_priv);
+
+	void		*(*attach_dmabuf)(void *alloc_ctx, struct dma_buf *dbuf,
+				unsigned long size, int write);
+	void		(*detach_dmabuf)(void *buf_priv);
+	int		(*map_dmabuf)(void *buf_priv);
+	void		(*unmap_dmabuf)(void *buf_priv);
+
+	void		*(*vaddr)(void *buf_priv);
+	void		*(*cookie)(void *buf_priv);
+
+	unsigned int	(*num_users)(void *buf_priv);
+
+	int		(*mmap)(void *buf_priv);
+};
+
+struct vb2_plane {
+	void			*mem_priv;
+	struct dma_buf		*dbuf;
+	unsigned int		dbuf_mapped;
+};
+
+/**
+ * enum vb2_io_modes - queue access methods
+ * @VB2_MMAP:		driver supports MMAP with streaming API
+ * @VB2_USERPTR:	driver supports USERPTR with streaming API
+ * @VB2_READ:		driver supports read() style access
+ * @VB2_WRITE:		driver supports write() style access
+ * @VB2_DMABUF:		driver supports DMABUF with streaming API
+ */
+enum vb2_io_modes {
+	VB2_MMAP	= (1 << 0),
+	VB2_USERPTR	= (1 << 1),
+	VB2_READ	= (1 << 2),
+	VB2_WRITE	= (1 << 3),
+	VB2_DMABUF	= (1 << 4),
+};
+
+/**
+ * enum vb2_fileio_flags - flags for selecting a mode of the file io emulator,
+ * by default the 'streaming' style is used by the file io emulator
+ * @VB2_FILEIO_READ_ONCE:	report EOF after reading the first buffer
+ * @VB2_FILEIO_WRITE_IMMEDIATELY:	queue buffer after each write() call
+ */
+enum vb2_fileio_flags {
+	VB2_FILEIO_READ_ONCE		= (1 << 0),
+	VB2_FILEIO_WRITE_IMMEDIATELY	= (1 << 1),
+};
+
+/**
+ * enum vb2_buffer_state - current video buffer state
+ * @VB2_BUF_STATE_DEQUEUED:	buffer under userspace control
+ * @VB2_BUF_STATE_PREPARED:	buffer prepared in videobuf and by the driver
+ * @VB2_BUF_STATE_QUEUED:	buffer queued in videobuf, but not in driver
+ * @VB2_BUF_STATE_ACTIVE:	buffer queued in driver and possibly used
+ *				in a hardware operation
+ * @VB2_BUF_STATE_DONE:		buffer returned from driver to videobuf, but
+ *				not yet dequeued to userspace
+ * @VB2_BUF_STATE_ERROR:	same as above, but the operation on the buffer
+ *				has ended with an error, which will be reported
+ *				to the userspace when it is dequeued
+ */
+enum vb2_buffer_state {
+	VB2_BUF_STATE_DEQUEUED,
+	VB2_BUF_STATE_PREPARED,
+	VB2_BUF_STATE_QUEUED,
+	VB2_BUF_STATE_ACTIVE,
+	VB2_BUF_STATE_DONE,
+	VB2_BUF_STATE_ERROR,
+};
+
+struct vb2_queue;
+
+/**
+ * struct vb2_buffer - represents a video buffer
+ * @v4l2_buf:		struct v4l2_buffer associated with this buffer; can
+ *			be read by the driver and relevant entries can be
+ *			changed by the driver in case of CAPTURE types
+ *			(such as timestamp)
+ * @v4l2_planes:	struct v4l2_planes associated with this buffer; can
+ *			be read by the driver and relevant entries can be
+ *			changed by the driver in case of CAPTURE types
+ *			(such as bytesused); NOTE that even for single-planar
+ *			types, the v4l2_planes[0] struct should be used
+ *			instead of v4l2_buf for filling bytesused - drivers
+ *			should use the vb2_set_plane_payload() function for that
+ * @vb2_queue:		the queue to which this driver belongs
+ * @num_planes:		number of planes in the buffer
+ *			on an internal driver queue
+ * @state:		current buffer state; do not change
+ * @queued_entry:	entry on the queued buffers list, which holds all
+ *			buffers queued from userspace
+ * @done_entry:		entry on the list that stores all buffers ready to
+ *			be dequeued to userspace
+ * @planes:		private per-plane information; do not change
+ */
+struct vb2_buffer {
+	struct v4l2_buffer	v4l2_buf;
+	struct v4l2_plane	v4l2_planes[VIDEO_MAX_PLANES];
+
+	struct vb2_queue	*vb2_queue;
+
+	unsigned int		num_planes;
+
+/* Private: internal use only */
+	enum vb2_buffer_state	state;
+
+	struct list_head	queued_entry;
+	struct list_head	done_entry;
+
+	struct vb2_plane	planes[VIDEO_MAX_PLANES];
+};
+
+/**
+ * struct vb2_ops - driver-specific callbacks
+ *
+ * @queue_setup:	called from VIDIOC_REQBUFS and VIDIOC_CREATE_BUFS
+ *			handlers before memory allocation, or, if
+ *			*num_planes != 0, after the allocation to verify a
+ *			smaller number of buffers. Driver should return
+ *			the required number of buffers in *num_buffers, the
+ *			required number of planes per buffer in *num_planes; the
+ *			size of each plane should be set in the sizes[] array
+ *			and optional per-plane allocator specific context in the
+ *			alloc_ctxs[] array. When called from VIDIOC_REQBUFS,
+ *			fmt == NULL, the driver has to use the currently
+ *			configured format and *num_buffers is the total number
+ *			of buffers, that are being allocated. When called from
+ *			VIDIOC_CREATE_BUFS, fmt != NULL and it describes the
+ *			target frame format (if the format isn't valid the
+ *			callback must return -EINVAL). In this case *num_buffers
+ *			are being allocated additionally to q->num_buffers.
+ * @wait_prepare:	release any locks taken while calling vb2 functions;
+ *			it is called before an ioctl needs to wait for a new
+ *			buffer to arrive; required to avoid a deadlock in
+ *			blocking access type
+ * @wait_finish:	reacquire all locks released in the previous callback;
+ *			required to continue operation after sleeping while
+ *			waiting for a new buffer to arrive
+ * @buf_init:		called once after allocating a buffer (in MMAP case)
+ *			or after acquiring a new USERPTR buffer; drivers may
+ *			perform additional buffer-related initialization;
+ *			initialization failure (return != 0) will prevent
+ *			queue setup from completing successfully; optional
+ * @buf_prepare:	called every time the buffer is queued from userspace
+ *			and from the VIDIOC_PREPARE_BUF ioctl; drivers may
+ *			perform any initialization required before each hardware
+ *			operation in this callback; drivers that support
+ *			VIDIOC_CREATE_BUFS must also validate the buffer size;
+ *			if an error is returned, the buffer will not be queued
+ *			in driver; optional
+ * @buf_finish:		called before every dequeue of the buffer back to
+ *			userspace; drivers may perform any operations required
+ *			before userspace accesses the buffer; optional
+ * @buf_cleanup:	called once before the buffer is freed; drivers may
+ *			perform any additional cleanup; optional
+ * @start_streaming:	called once to enter 'streaming' state; the driver may
+ *			receive buffers with @buf_queue callback before
+ *			@start_streaming is called; the driver gets the number
+ *			of already queued buffers in count parameter; driver
+ *			can return an error if hardware fails or not enough
+ *			buffers has been queued, in such case all buffers that
+ *			have been already given by the @buf_queue callback are
+ *			invalidated.
+ * @stop_streaming:	called when 'streaming' state must be disabled; driver
+ *			should stop any DMA transactions or wait until they
+ *			finish and give back all buffers it got from buf_queue()
+ *			callback; may use vb2_wait_for_all_buffers() function
+ * @buf_queue:		passes buffer vb to the driver; driver may start
+ *			hardware operation on this buffer; driver should give
+ *			the buffer back by calling vb2_buffer_done() function;
+ *			it is allways called after calling STREAMON ioctl;
+ *			might be called before start_streaming callback if user
+ *			pre-queued buffers before calling STREAMON
+ */
+struct vb2_ops {
+	int (*queue_setup)(struct vb2_queue *q, const struct v4l2_format *fmt,
+			   unsigned int *num_buffers, unsigned int *num_planes,
+			   unsigned int sizes[], void *alloc_ctxs[]);
+
+	void (*wait_prepare)(struct vb2_queue *q);
+	void (*wait_finish)(struct vb2_queue *q);
+
+	int (*buf_init)(struct vb2_buffer *vb);
+	//int (*buf_prepare)(struct vb2_buffer *vb);
+	int (*buf_prepare)(struct vb2_buffer *vb, unsigned int index);
+	int (*buf_finish)(struct vb2_buffer *vb);
+	void (*buf_cleanup)(struct vb2_buffer *vb);
+
+	int (*start_streaming)(struct vb2_queue *q, unsigned int count);
+	int (*stop_streaming)(struct vb2_queue *q);
+
+	void (*buf_queue)(struct vb2_buffer *vb);
+};
+
+struct v4l2_fh;
+
+/**
+ * struct vb2_queue - a videobuf queue
+ *
+ * @type:	queue type (see V4L2_BUF_TYPE_* in linux/videodev2.h
+ * @io_modes:	supported io methods (see vb2_io_modes enum)
+ * @io_flags:	additional io flags (see vb2_fileio_flags enum)
+ * @lock:	pointer to a mutex that protects the vb2_queue struct. The
+ *		driver can set this to a mutex to let the v4l2 core serialize
+ *		the queuing ioctls. If the driver wants to handle locking
+ *		itself, then this should be set to NULL. This lock is not used
+ *		by the videobuf2 core API.
+ * @owner:	The filehandle that 'owns' the buffers, i.e. the filehandle
+ *		that called reqbufs, create_buffers or started fileio.
+ *		This field is not used by the videobuf2 core API, but it allows
+ *		drivers to easily associate an owner filehandle with the queue.
+ * @ops:	driver-specific callbacks
+ * @mem_ops:	memory allocator specific callbacks
+ * @drv_priv:	driver private data
+ * @buf_struct_size: size of the driver-specific buffer structure;
+ *		"0" indicates the driver doesn't want to use a custom buffer
+ *		structure type, so sizeof(struct vb2_buffer) will is used
+ * @gfp_flags:	additional gfp flags used when allocating the buffers.
+ *		Typically this is 0, but it may be e.g. GFP_DMA or __GFP_DMA32
+ *		to force the buffer allocation to a specific memory zone.
+ *
+ * @memory:	current memory type used
+ * @bufs:	videobuf buffer structures
+ * @num_buffers: number of allocated/used buffers
+ * @queued_list: list of buffers currently queued from userspace
+ * @queued_count: number of buffers owned by the driver
+ * @done_list:	list of buffers ready to be dequeued to userspace
+ * @done_lock:	lock to protect done_list list
+ * @done_wq:	waitqueue for processes waiting for buffers ready to be dequeued
+ * @alloc_ctx:	memory type/allocator-specific contexts for each plane
+ * @streaming:	current streaming state
+ * @fileio:	file io emulator internal data, used only if emulator is active
+ */
+struct vb2_queue {
+	enum v4l2_buf_type		type;
+	unsigned int			io_modes;
+	unsigned int			io_flags;
+	//struct mutex			*lock;
+	_Mutex				*lock;
+	
+	struct v4l2_fh			*owner;
+
+	const struct vb2_ops		*ops;
+	const struct vb2_mem_ops	*mem_ops;
+	void				*drv_priv;
+	unsigned int			buf_struct_size;
+	u32				timestamp_type;
+	gfp_t				gfp_flags;
+
+/* private: internal use only */
+	enum v4l2_memory		memory;
+	struct vb2_buffer		*bufs[VIDEO_MAX_FRAME];
+	unsigned int			num_buffers;
+
+	struct list_head		queued_list;
+
+	atomic_t			queued_count;
+	struct list_head		done_list;
+	//spinlock_t			done_lock;
+	//_LOCK_T				done_lock;
+	_Mutex					done_lock;
+	//wait_queue_head_t		done_wq;
+	_Sema				done_wq;	//counting semaphore 
+	
+	void				*alloc_ctx[VIDEO_MAX_PLANES];
+	unsigned int			plane_sizes[VIDEO_MAX_PLANES];
+
+	//unsigned int			streaming:1;
+
+	unsigned int			streaming;
+	//unsigned int		start_streaming_called;//added by Ian
+
+	struct vb2_fileio_data		*fileio;
+};
+
+void *vb2_plane_vaddr(struct vb2_buffer *vb, unsigned int plane_no);
+void *vb2_plane_cookie(struct vb2_buffer *vb, unsigned int plane_no);
+
+void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state);
+int vb2_wait_for_all_buffers(struct vb2_queue *q);
+
+int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b);
+int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req);
+
+int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create);
+int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b);
+
+int vb2_queue_init(struct vb2_queue *q);
+
+void vb2_queue_release(struct vb2_queue *q);
+
+int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b);
+int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb);
+int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking);
+
+int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type);
+int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type);
+
+int vb2_mmap(struct vb2_queue *q);
+#ifndef CONFIG_MMU
+unsigned long vb2_get_unmapped_area(struct vb2_queue *q,
+				    unsigned long addr,
+				    unsigned long len,
+				    unsigned long pgoff,
+				    unsigned long flags);
+#endif
+#if 0
+unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait);
+size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count,
+		loff_t *ppos, int nonblock);
+size_t vb2_write(struct vb2_queue *q, char __user *data, size_t count,
+		loff_t *ppos, int nonblock);
+#endif
+/**
+ * vb2_is_streaming() - return streaming status of the queue
+ * @q:		videobuf queue
+ */
+static inline bool vb2_is_streaming(struct vb2_queue *q)
+{
+	return q->streaming;
+}
+
+/**
+ * vb2_is_busy() - return busy status of the queue
+ * @q:		videobuf queue
+ *
+ * This function checks if queue has any buffers allocated.
+ */
+static inline bool vb2_is_busy(struct vb2_queue *q)
+{
+	return (q->num_buffers > 0);
+}
+
+/**
+ * vb2_get_drv_priv() - return driver private data associated with the queue
+ * @q:		videobuf queue
+ */
+static inline void *vb2_get_drv_priv(struct vb2_queue *q)
+{
+	return q->drv_priv;
+}
+
+/**
+ * vb2_set_plane_payload() - set bytesused for the plane plane_no
+ * @vb:		buffer for which plane payload should be set
+ * @plane_no:	plane number for which payload should be set
+ * @size:	payload in bytes
+ */
+static inline void vb2_set_plane_payload(struct vb2_buffer *vb,
+				 unsigned int plane_no, unsigned long size)
+{
+	if (plane_no < vb->num_planes)
+		vb->v4l2_planes[plane_no].bytesused = size;
+}
+
+/**
+ * vb2_get_plane_payload() - get bytesused for the plane plane_no
+ * @vb:		buffer for which plane payload should be set
+ * @plane_no:	plane number for which payload should be set
+ * @size:	payload in bytes
+ */
+static inline unsigned long vb2_get_plane_payload(struct vb2_buffer *vb,
+				 unsigned int plane_no)
+{
+	if (plane_no < vb->num_planes)
+		return vb->v4l2_planes[plane_no].bytesused;
+	return 0;
+}
+
+/**
+ * vb2_plane_size() - return plane size in bytes
+ * @vb:		buffer for which plane size should be returned
+ * @plane_no:	plane number for which size should be returned
+ */
+static inline unsigned long
+vb2_plane_size(struct vb2_buffer *vb, unsigned int plane_no)
+{
+	if (plane_no < vb->num_planes)
+		return vb->v4l2_planes[plane_no].length;
+	return 0;
+}
+
+/*
+ * The following functions are not part of the vb2 core API, but are simple
+ * helper functions that you can use in your struct v4l2_file_operations,
+ * struct v4l2_ioctl_ops and struct vb2_ops. They will serialize if vb2_queue->lock
+ * or video_device->lock is set, and they will set and test vb2_queue->owner
+ * to check if the calling filehandle is permitted to do the queuing operation.
+ */
+
+/* struct v4l2_ioctl_ops helpers */
+
+int vb2_ioctl_reqbufs(void *priv, struct v4l2_requestbuffers *p);
+int vb2_ioctl_create_bufs(void *priv, struct v4l2_create_buffers *p);
+int vb2_ioctl_prepare_buf(void *priv, struct v4l2_buffer *p);
+int vb2_ioctl_querybuf(void *priv, struct v4l2_buffer *p);
+int vb2_ioctl_qbuf(void *priv, struct v4l2_buffer *p);
+int vb2_ioctl_dqbuf(void *priv, struct v4l2_buffer *p);
+int vb2_ioctl_streamon(void *priv, enum v4l2_buf_type i);
+int vb2_ioctl_streamoff(void *priv, enum v4l2_buf_type i);
+int vb2_ioctl_expbuf(void *priv, struct v4l2_exportbuffer *p);
+
+/* struct v4l2_file_operations helpers */
+
+int vb2_fop_mmap();
+int vb2_fop_release();
+#if 0
+ssize_t vb2_fop_write(struct file *file, char __user *buf,
+		size_t count, loff_t *ppos);
+ssize_t vb2_fop_read(struct file *file, char __user *buf,
+		size_t count, loff_t *ppos);
+unsigned int vb2_fop_poll(struct file *file, poll_table *wait);
+#endif
+#ifndef CONFIG_MMU
+unsigned long vb2_fop_get_unmapped_area(unsigned long addr,
+		unsigned long len, unsigned long pgoff, unsigned long flags);
+#endif
+
+/* struct vb2_ops helpers, only use if vq->lock is non-NULL. */
+
+void vb2_ops_wait_prepare(struct vb2_queue *vq);
+void vb2_ops_wait_finish(struct vb2_queue *vq);
+
+#endif /* _MEDIA_VIDEOBUF2_CORE_H */

RTL00_SDKV35a/component/common/video/v4l2/inc/videobuf2-memops.h

@@ -0,0 +1,41 @@
+/*
+ * videobuf2-memops.h - generic memory handling routines for videobuf2
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * Author: Pawel Osciak <pawel@osciak.com>
+ *	   Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _MEDIA_VIDEOBUF2_MEMOPS_H
+#define _MEDIA_VIDEOBUF2_MEMOPS_H
+
+#include "videobuf2-core.h"
+
+
+/**
+ * vb2_vmarea_handler - common vma refcount tracking handler
+ * @refcount:	pointer to refcount entry in the buffer
+ * @put:	callback to function that decreases buffer refcount
+ * @arg:	argument for @put callback
+ */
+struct vb2_vmarea_handler {
+	atomic_t		*refcount;
+	void			(*put)(void *arg);
+	void			*arg;
+};
+
+extern const struct vm_operations_struct vb2_common_vm_ops;
+
+int vb2_get_contig_userptr(unsigned long vaddr, unsigned long size,
+			   struct vm_area_struct **res_vma, dma_addr_t *res_pa);
+
+struct vm_area_struct *vb2_get_vma(struct vm_area_struct *vma);
+void vb2_put_vma(struct vm_area_struct *vma);
+
+
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/videobuf2-vmalloc.h

@@ -0,0 +1,21 @@
+/*
+ * videobuf2-vmalloc.h - vmalloc memory allocator for videobuf2
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * Author: Pawel Osciak <pawel@osciak.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _MEDIA_VIDEOBUF2_VMALLOC_H
+#define _MEDIA_VIDEOBUF2_VMALLOC_H
+
+#include "videobuf2-core.h"
+
+
+extern const struct vb2_mem_ops vb2_vmalloc_memops;
+
+#endif

RTL00_SDKV35a/component/common/video/v4l2/inc/videodev2.h

@@ -0,0 +1,62 @@
+/*
+ *  Video for Linux Two header file
+ *
+ *  Copyright (C) 1999-2012 the contributors
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  Alternatively you can redistribute this file under the terms of the
+ *  BSD license as stated below:
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *  3. The names of its contributors may not be used to endorse or promote
+ *     products derived from this software without specific prior written
+ *     permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *	Header file for v4l or V4L2 drivers and applications
+ * with public API.
+ * All kernel-specific stuff were moved to media/v4l2-dev.h, so
+ * no #if __KERNEL tests are allowed here
+ *
+ *	See http://linuxtv.org for more info
+ *
+ *	Author: Bill Dirks <bill@thedirks.org>
+ *		Justin Schoeman
+ *              Hans Verkuil <hverkuil@xs4all.nl>
+ *		et al.
+ */
+#ifndef __LINUX_VIDEODEV2_H
+#define __LINUX_VIDEODEV2_H
+
+//#include <linux/time.h>     /* need struct timeval */
+#include "uapi_videodev2.h"
+
+#endif /* __LINUX_VIDEODEV2_H */

RTL00_SDKV35a/component/os/freertos/freertos_v8.1.2/Source/portable/MemMang/heap_5.c

@@ -165,13 +165,13 @@ static size_t xBlockAllocatedBit = 0;
 
 /* Realtek test code start */
 //TODO: remove section when combine BD and BF
-#if ((defined CONFIG_PLATFORM_8195A) || (defined CONFIG_PLATFORM_8711B))
+#if (defined(CONFIG_PLATFORM_8195A) || defined(CONFIG_PLATFORM_8711B))
 #include "section_config.h"
 SRAM_BF_DATA_SECTION
 #endif
-static unsigned char ucHeap[ configTOTAL_HEAP_SIZE ];
+static unsigned char ucHeap[configTOTAL_HEAP_SIZE];
 
-#if (defined CONFIG_PLATFORM_8195A)
+#if defined(CONFIG_PLATFORM_8195A)
 HeapRegion_t xHeapRegions[] =
 {
 	{ (uint8_t*)0x10002300, 0x3D00 }, 	// Image1 recycle heap  (15616 bytes)
@@ -179,7 +179,8 @@ HeapRegion_t xHeapRegions[] =
 #if 0
 	{ (uint8_t*)0x301b5000, 300*1024 },	// SDRAM heap
 #endif        
-	{ NULL, 0 }                             // Terminates the array.
+//	{ NULL, 0 },	// add SDRAM heap
+	{ NULL, 0 }     // Terminates the array.
 };
 #elif (defined CONFIG_PLATFORM_8711B)
 HeapRegion_t xHeapRegions[] =
@@ -220,6 +221,9 @@ void *pvReturn = NULL;
 	/* Realtek test code start */
 	if(pxEnd == NULL)
 	{
+#if defined(CONFIG_PLATFORM_8195A)
+		xHeapRegions[1].xSizeInBytes = (u32)0x10070000 - (u32)xHeapRegions[1].pucStartAddress;
+#endif
 		vPortDefineHeapRegions( xHeapRegions );
 	}
 	/* Realtek test code end */
@@ -649,3 +653,11 @@ void* pvPortReAlloc( void *pv,  size_t xWantedSize )
 	return NULL;
 }
 
+/*
+#ifdef  ARDUINO_SDK
+int vPortAddHeapRegion(uint8_t *addr, size_t size)
+{
+	return 0;
+}
+#endif
+*/

RTL00_SDKV35a/component/os/os_dep/tcm_heap.c

@@ -98,9 +98,9 @@ void *tcm_heap_allocmem(int size)
 			{
 				/* Just remove this chunk from the free list */
 				prev->next = chunk->next;
-				#ifdef _DEBUG
-					memset(chunk, ALLOC_FILL_CODE, size);
-				#endif
+#ifdef _DEBUG
+				memset(chunk, ALLOC_FILL_CODE, size);
+#endif
 				
 				rtw_exit_critical(&tcm_lock, &irqL);
 				//printf("----ALLOC1-----\n\r");
@@ -112,9 +112,9 @@ void *tcm_heap_allocmem(int size)
 			{
 				/* Allocate from the END of an existing chunk */
 				chunk->size -= size;
-				#ifdef _DEBUG
-					memset((uint8_t *)chunk + chunk->size, ALLOC_FILL_CODE, size);
-				#endif
+#ifdef _DEBUG
+				memset((uint8_t *)chunk + chunk->size, ALLOC_FILL_CODE, size);
+#endif
 				rtw_exit_critical(&tcm_lock, &irqL);
 				//printf("----ALLOC2-----\n\r");
 				// tcm_heap_dump();

RTL00_SDKV35a/component/soc/realtek/8195a/cmsis/device/app_start.c

@@ -102,21 +102,20 @@ VOID ShowRamBuildInfo(VOID)
 
 _WEAK int main(void)
 {
-    gpio_t gpio_led;
-    
-#ifndef CONFIG_WITHOUT_MONITOR
-    ReRegisterPlatformLogUart();
-#endif
+	HalPinCtrlRtl8195A(JTAG, 0, 1);
 
-    // Init LED control pin
-    gpio_init(&gpio_led, PC_5);
-    gpio_dir(&gpio_led, PIN_OUTPUT);    // Direction: Output
-    gpio_mode(&gpio_led, PullNone);     // No pull
-    while(1){
-        gpio_write(&gpio_led, !gpio_read(&gpio_led));
-        RtlMsleepOS(1000);
+	DiagPrintf("\r\nRTL Console ROM: Start - press key 'Up', Help '?'\r\n");
+	while(pUartLogCtl[5] != 1);
+	pUartLogCtl[3] = 0;
+	pUartLogCtl[6] = 1;
+    DiagPrintf("\r<RTL8710AF>");
+    while(1) {
+    	while(pUartLogCtl[4] != 1 );
+    	UartLogCmdExecute(pUartLogCtl);
+        DiagPrintf("\r<RTL8710AF>");
+        pUartLogCtl[4] = 0;
     }
-
+    
     return 0;
 }
 #else

RTL00_SDKV35a/component/soc/realtek/8195a/fwlib/ram_lib/loader.c

@@ -0,0 +1,170 @@
+/*
+ * loader.c
+ *
+ *  Created on: 17 нояб. 2016 г.
+ *      Author: PVV
+ */
+#include "rtl8195a.h"
+#include "diag.h"
+#include "hal_spi_flash.h"
+#include "hal_api.h"
+#include "hal_platform.h"
+#include "diag.h"
+#include "hal_diag.h"
+#include "rtl8195a_uart.h"
+#include "rtl8195a/rtl8195a_peri_on.h"
+#include "hal_peri_on.h"
+#include "wifi_conf.h"
+
+
+//-------------------------------------------------------------------------
+// Data declarations
+extern u32 * NewVectorTable; // LD: NewVectorTable = 0x10000000;
+extern START_FUNC __image2_entry_func__;
+extern u8 __image2_validate_code__;
+extern u8 __image1_bss_start__, __image1_bss_end__;
+extern u8 __rom_bss_start__, __rom_bss_end__;
+extern u8 __bss_start__, __bss_end__;
+
+typedef struct __RAM_IMG2_VALID_PATTEN__ {
+	char rtkwin[7];
+	u8 x[13];
+} _RAM_IMG2_VALID_PATTEN, *_PRAM_IMG2_VALID_PATTEN;
+
+const uint8_t __attribute__((section(".image1.validate.rodata"))) RAM_IMG1_VALID_PATTEN[8] =
+		{ 0x23, 0x79, 0x16, 0x88, 0xff, 0xff, 0xff, 0xff };
+
+PRAM_FUNCTION_START_TABLE __attribute__((section(".data.pRamStartFun"))) pRamStartFun =
+		(PRAM_FUNCTION_START_TABLE) 0x10000BC8;
+RAM_START_FUNCTION __attribute__((section(".start.ram.data.a"))) gRamStartFun =
+		{ PreProcessForVendor + 1 };
+RAM_START_FUNCTION __attribute__((section(".start.ram.data.b"))) gRamPatchWAKE =
+		{ RtlBootToSram + 1 };
+RAM_START_FUNCTION __attribute__((section(".start.ram.data.c"))) gRamPatchFun0 =
+		{ RtlBootToSram + 1 };
+RAM_START_FUNCTION __attribute__((section(".start.ram.data.d"))) gRamPatchFun1 =
+		{ RtlBootToSram + 1 };
+RAM_START_FUNCTION __attribute__((section(".start.ram.data.e"))) gRamPatchFun2 =
+		{ RtlBootToSram + 1 };
+
+RAM_START_FUNCTION __attribute__((section(".image2.ram.data"))) gImage2EntryFun0 =
+		{ InfraStart + 1 };
+_RAM_IMG2_VALID_PATTEN __attribute__((section(".image2.validate.rodata"))) RAM_IMG2_VALID_PATTEN =
+		{ { "RTKWin" }, { 0xff, 0, 1, 1, 0, 0x95, 0x81, 1, 1, 0, 0, 0, 0 } };
+
+HAL_GPIO_ADAPTER __attribute__((section(".hal.ram.data"))) gBoot_Gpio_Adapter;
+
+
+void sub_100037EC(void)
+{
+	HAL_SYS_CTRL_WRITE32(REG_SYS_REGU_CTRL0, (HAL_SYS_CTRL_READ32(REG_SYS_REGU_CTRL0) & 0xFFFFF) | 0xE00000);
+	HAL_SYS_CTRL_WRITE32(REG_SYS_REGU_CTRL0, HAL_SYS_CTRL_READ32(REG_SYS_REGU_CTRL0) | 2);
+}
+
+void __attribute__((section(".hal.ram.text"))) PreProcessForVendor(void) {
+	u8 efuse0xF8_data;
+	// memset((void *)0x10000300, 0 , 0x10000BC8-0x10000300); ???
+	HalPinCtrlRtl8195A(JTAG, 0, 1);
+	HalDelayUs(1000);
+	HALEFUSEOneByteReadROM(HAL_SYS_CTRL_READ32(REG_SYS_EFUSE_CTRL), 0xF8,
+				&efuse0xF8_data, L25EOUTVOLTAGE);
+	if(efuse0xF8_data == CHIP_ID_8711AF) { // ??
+		HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN, HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) | 0x200000) ; 1<<21
+
+		sub_100037EC();
+	}
+	int flash_enable = HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) & BIT_SOC_FLASH_EN;
+
+
+}
+
+void sub_1000441A(void)
+{
+	ConfigDebugErr = -1;
+	ConfigDebugWarn = 0;
+	ConfigDebugInfo = 0;
+}
+
+//----- InfraStart
+void __attribute__((section(".infra.ram.start"))) InfraStart(void) {
+	NewVectorTable[2] = HalNMIHandler_Patch;
+
+	sub_100022F0();
+	memset((void *)0x10000300, 0 , 0x10000BC8-0x10000300);
+
+	HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL, HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) | BIT_SOC_ACTCK_VENDOR_REG_EN);
+	HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL, HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) | BIT_SOC_SLPCK_VENDOR_REG_EN);
+	HalPinCtrlRtl8195A(JTAG, 0, 1);
+	HAL_PERI_ON_WRITE32(REG_GPIO_SHTDN_CTRL, 0x7FF);
+	HAL_PERI_ON_WRITE32(REG_CPU_PERIPHERAL_CTRL, HAL_PERI_ON_READ32(REG_CPU_PERIPHERAL_CTRL) | BIT_SPI_FLSH_PIN_EN);
+	HAL_PERI_ON_WRITE32(REG_CPU_PERIPHERAL_CTRL, HAL_SYHAL_PERI_ON_READ32S_CTRL_READ32(REG_CPU_PERIPHERAL_CTRL) | BIT_LOG_UART_PIN_EN);
+	VectorTableInitRtl8195A(0x1FFFFFFC); // 0x1FFFFFFC StackP
+	HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN, HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) | BIT_SOC_FLASH_EN) ;
+	HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL, HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) | BIT_SOC_ACTCK_FLASH_EN);
+	HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL, HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) | BIT_SOC_SLPCK_FLASH_EN);
+	HalPinCtrlRtl8195A(SPI_FLASH, 0, 1);
+	sub_1000367C();
+	HAL_SYS_CTRL_WRITE32(REG_SYS_CLK_CTRL1, HAL_SYS_CTRL_READ32(REG_SYS_CLK_CTRL1) & 0x8F);
+	sub_1000441A();
+	HAL_UART_READ32(UART_REV_BUF_OFF);
+	HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN, HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) & (~BIT_SOC_LOG_UART_EN));
+	HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN, HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) | BIT_SOC_LOG_UART_EN);
+	HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL, HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) | BIT_SOC_ACTCK_LOG_UART_EN);
+	LOG_UART_ADAPTER UartAdapter;
+	UartAdapter.BaudRate = UART_BAUD_RATE_38400;
+    UartAdapter.FIFOControl = 0xC1;
+    UartAdapter.IntEnReg = 0x00;
+    UartAdapter.Parity = UART_PARITY_DISABLE;
+    UartAdapter.Stop = UART_STOP_1BIT;
+    UartAdapter.DataLength = UART_DATA_LEN_8BIT;
+    HalLogUartInit(UartAdapter); //    sub_10004434(38400, 193, 0, v14);
+    TIMER_ADAPTER tim_adapter;
+    tim_adapter.IrqHandle.IrqFun = &UartLogIrqHandle;
+	tim_adapter.IrqHandle.IrqNum = UART_LOG_IRQ;
+	tim_adapter.IrqHandle.Data = 0;
+	tim_adapter.IrqHandle.Priority = 5;
+
+	VectorIrqRegisterRtl8195A(&tim_adapter.IrqHandle);
+    UartAdapter.IntEnReg = 0x05;
+    HalLogUartInit(UartAdapter);
+    HAL_PERI_ON_WRITE32(REG_PON_ISO_CTRL, 3); // ? USB ?
+    HAL_PERI_ON_WRITE32(REG_OSC32K_CTRL, HAL_PERI_ON_READ32(REG_OSC32K_CTRL) | BIT_32K_POW_CKGEN_EN);
+    HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN, HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) | BIT_SOC_GTIMER_EN);
+    HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL, HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) | BIT_SOC_ACTCK_TIMER_EN);
+    HAL_PERI_ON_WRITE32(REG_PESOC_CLK_CTRL, HAL_PERI_ON_READ32(REG_PESOC_CLK_CTRL) | BIT_SOC_SLPCK_TIMER_EN);
+
+	tim_adapter.TimerIrqPriority = 0;
+	tim_adapter.TimerLoadValueUs = 0;
+	tim_adapter.TimerMode = FREE_RUN_MODE;
+	tim_adapter.IrqDis = 1;
+	tim_adapter.TimerId = 1;
+	HalTimerInitRtl8195a((PTIMER_ADAPTER) &tim_adapter);
+	SpicInitRtl8195A(1, 1); // InitBaudRate 1, SpicBitMode 1
+	SpicFlashInitRtl8195A(1); // SpicBitMode 1
+	DBG_8195A("===== Enter Image 1.5 ====\nImg2 Sign: %s, InfaStart @ 0x%08x\n",
+			&__image2_validate_code__, __image2_entry_func__);
+
+
+	HAL_SYS_CTRL_WRITE32(REG_SYS_CLK_CTRL0,
+			HAL_SYS_CTRL_READ32(REG_SYS_CLK_CTRL0) | BIT4);
+	if (HalCommonInit() != HAL_OK) DBG_8195A("Hal Common Init Failed.\n");
+	DBG_8195A("===== Enter Image 2 ====\n");
+	ShowRamBuildInfo(); // app_start.c: VOID ShowRamBuildInfo(VOID)
+	memset(&__bss_start__, 0, &__bss_end__ - &__bss_start__);
+	int clk = (HAL_SYS_CTRL_READ32(REG_SYS_CLK_CTRL0)
+			>> BIT_SHIFT_PESOC_OCP_CPU_CK_SEL) & 1;
+	if (clk) {
+		SpicNVMCalLoadAll();
+		SpicReadIDRtl8195A();
+	}
+	SystemCoreClockUpdate();
+	SYSPlatformInit();
+	En32KCalibration();
+	InitSoCPM();
+	SDIO_Device_Off();
+	VectorTableInitForOSRtl8195A(&vPortSVCHandler, &xPortPendSVHandler,
+			&xPortSysTickHandler);
+	if (clk) SpicDisableRtl8195A();
+	_AppStart();
+}
+

RTL00_SDKV35a/component/soc/realtek/8195a/fwlib/ram_lib/startup.c

@@ -1,6 +1,6 @@
 /* 
- startup.o sdk-ameba-rtl8710af-v3.5a_without_NDA_GCC_V1.0.0
- pvvx 2016
+ * startup.o sdk-ameba-rtl8710af-v3.5a_without_NDA_GCC_V1.0.0
+ * pvvx 2016
  */
 
 #include "rtl8195a.h"
@@ -41,7 +41,7 @@ void StartupHalInitPlatformLogUart(void);
 void RtlBootToSram(void);
 int IsForceLoadDefaultImg2(void);
 void StartupHalSpicInit(int InitBaudRate);
-void PreProcessForVendor(u32 def_fuse, u32 Img2Addr, int a3);
+void PreProcessForVendor(void);
 void HalHardFaultHandler_Patch_c(u32 HardDefaultArg);
 void VectorTableOverrideRtl8195A(u32 StackP);
 void SYSPlatformInit(void);
@@ -220,7 +220,7 @@ void __attribute__((section(".hal.ram.text"))) SYSCpuClkConfig(int ChipID, int S
 		SpicWaitWipRtl8195A(); // extern u32 SpicWaitWipRtl8195A(VOID);
 		flg = 1;
 	}
-	if (ChipID == 0xFC && (!SysCpuClk)) SysCpuClk = 1;
+	if (ChipID == CHIP_ID_8710AF && (!SysCpuClk)) SysCpuClk = 1;
 	HalCpuClkConfig(SysCpuClk);
 	HalDelayUs(1000);
 	StartupHalInitPlatformLogUart();
@@ -283,13 +283,12 @@ void __attribute__((section(".hal.ram.text"))) StartupHalSpicInit(
 }
 
 //----- PreProcessForVendor
-void __attribute__((section(".hal.ram.text"))) PreProcessForVendor(u32 def_fuse,
-		u32 Img2Addr, int a3) {
+void __attribute__((section(".hal.ram.text"))) PreProcessForVendor(void) {
 	START_FUNC entry_func;
 	u32 run_image;
-	u32 Image2Addr = Img2Addr;
+	u32 Image2Addr;
 	u32 v16 = 0, v17;
-	u8 efuse0xD3_data = def_fuse >> 24;
+	u8 efuse0xD3_data;
 	HALEFUSEOneByteReadROM(HAL_SYS_CTRL_READ32(REG_SYS_EFUSE_CTRL), 0xD3,
 			&efuse0xD3_data, L25EOUTVOLTAGE);
 	if (efuse0xD3_data & 1)	v16 = HalPinCtrlRtl8195A(JTAG, 0, 1);
@@ -303,7 +302,7 @@ void __attribute__((section(".hal.ram.text"))) PreProcessForVendor(u32 def_fuse,
 	} else {
 		memcpy(&Image2Addr, (const void *) 0x1006FFFC, 4); // ???
 		entry_func = Image2Addr;
-		if (chip_id != 0xFB) {
+		if (chip_id != CHIP_ID_8711AN) { // 0xFB
 			StartupHalSpicInit(1); // BaudRate 1
 			x_enable = 1;
 		}
@@ -319,7 +318,10 @@ void __attribute__((section(".hal.ram.text"))) PreProcessForVendor(u32 def_fuse,
 		sdr_enable = 1;
 	}
 #else
-	SdrPowerOff();
+//	SdrPowerOff();
+    SDR_PIN_FCTRL(OFF);
+    LDO25M_CTRL(OFF);
+    HAL_WRITE32(PERI_ON_BASE, REG_SOC_FUNC_EN, HAL_READ32(PERI_ON_BASE, REG_SOC_FUNC_EN) | BIT(21));
 #endif
 	ConfigDebugErr = -1;
 	ConfigDebugWarn = 0;
@@ -331,7 +333,7 @@ void __attribute__((section(".hal.ram.text"))) PreProcessForVendor(u32 def_fuse,
 	DBG_8195A("===== Enter Image 1 ====\n");
 	if (x_enable) {
 		SpicReadIDRtl8195A();
-		SpicFlashInitRtl8195A(1); // SpicBitMode 1
+		SpicFlashInitRtl8195A(SpicDualBitMode); // SpicBitMode 1
 	}
 //	if (sdr_enable)	SdrControllerInit();
 	if (flash_enable) {
@@ -362,10 +364,8 @@ void __attribute__((section(".hal.ram.text"))) PreProcessForVendor(u32 def_fuse,
 					sign1 = *prdflash++;
 					sign2 = *prdflash;
 					if (sign2 == 0x31313738) {
-						if (sign1 == 0x35393138)
-							v16 = OTA_addr;
-						else if (sign1 == 0x35393130)
-							v17 = OTA_addr;
+						if (sign1 == 0x35393138) v16 = OTA_addr;
+						else if (sign1 == 0x35393130) v17 = OTA_addr;
 					}
 LABEL_41: 			if (IsForceLoadDefaultImg2()) {
 						if (v17 != -1) run_image = v17;
@@ -373,8 +373,7 @@ LABEL_41: 			if (IsForceLoadDefaultImg2()) {
 							run_image = v16;
 							if (run_image == -1) {
 								DiagPrintf("Fatal: no fw\n");
-								while (1)
-									RtlConsolRom(1000);
+								while (1) RtlConsolRom(1000);
 							}
 						}
 					} else {
@@ -383,8 +382,7 @@ LABEL_41: 			if (IsForceLoadDefaultImg2()) {
 							run_image = v17;
 							if (run_image == -1) {
 								DiagPrintf("Fatal: no fw\n");
-								while (1)
-									RtlConsolRom(1000);
+								while (1) RtlConsolRom(1000);
 							}
 						}
 					}

RTL00_SDKV35a/component/soc/realtek/8195a/fwlib/ram_lib/usb_otg/include/usb_otg_inc/errno.h

@@ -0,0 +1,149 @@
+#ifndef _GENERIC_ERRNO_H
+#define _GENERIC_ERRNO_H
+
+#define	EPERM		 1	/* Operation not permitted */
+#define	ENOENT		 2	/* No such file or directory */
+#define	ESRCH		 3	/* No such process */
+#define	EINTR		 4	/* Interrupted system call */
+#define	EIO		 5	/* I/O error */
+#define	ENXIO		 6	/* No such device or address */
+#define	E2BIG		 7	/* Argument list too long */
+#define	ENOEXEC		 8	/* Exec format error */
+#define	EBADF		 9	/* Bad file number */
+#define	ECHILD		10	/* No child processes */
+#define	EAGAIN		11	/* Try again */
+#define	ENOMEM		12	/* Out of memory */
+#define	EACCES		13	/* Permission denied */
+#define	EFAULT		14	/* Bad address */
+#define	ENOTBLK		15	/* Block device required */
+#define	EBUSY		16	/* Device or resource busy */
+#define	EEXIST		17	/* File exists */
+#define	EXDEV		18	/* Cross-device link */
+#define	ENODEV		19	/* No such device */
+#define	ENOTDIR		20	/* Not a directory */
+#define	EISDIR		21	/* Is a directory */
+#define	EINVAL		22	/* Invalid argument */
+#define	ENFILE		23	/* File table overflow */
+#define	EMFILE		24	/* Too many open files */
+#define	ENOTTY		25	/* Not a typewriter */
+#define	ETXTBSY		26	/* Text file busy */
+#define	EFBIG		27	/* File too large */
+#define	ENOSPC		28	/* No space left on device */
+#define	ESPIPE		29	/* Illegal seek */
+#define	EROFS		30	/* Read-only file system */
+#define	EMLINK		31	/* Too many links */
+#define	EPIPE		32	/* Broken pipe */
+#define	EDOM		33	/* Math argument out of domain of func */
+#define	ERANGE		34	/* Math result not representable */
+
+#define	EDEADLK		35	/* Resource deadlock would occur */
+#define	ENAMETOOLONG	36	/* File name too long */
+#define	ENOLCK		37	/* No record locks available */
+#define	ENOSYS		38	/* Function not implemented */
+#define	ENOTEMPTY	39	/* Directory not empty */
+#define	ELOOP		40	/* Too many symbolic links encountered */
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	ENOMSG		42	/* No message of desired type */
+#define	EIDRM		43	/* Identifier removed */
+#define	ECHRNG		44	/* Channel number out of range */
+#define	EL2NSYNC	45	/* Level 2 not synchronized */
+#define	EL3HLT		46	/* Level 3 halted */
+#define	EL3RST		47	/* Level 3 reset */
+#define	ELNRNG		48	/* Link number out of range */
+#define	EUNATCH		49	/* Protocol driver not attached */
+#define	ENOCSI		50	/* No CSI structure available */
+#define	EL2HLT		51	/* Level 2 halted */
+#define	EBADE		52	/* Invalid exchange */
+#define	EBADR		53	/* Invalid request descriptor */
+#define	EXFULL		54	/* Exchange full */
+#define	ENOANO		55	/* No anode */
+#define	EBADRQC		56	/* Invalid request code */
+#define	EBADSLT		57	/* Invalid slot */
+
+#define	EDEADLOCK	EDEADLK
+
+#define	EBFONT		59	/* Bad font file format */
+#define	ENOSTR		60	/* Device not a stream */
+#define	ENODATA		61	/* No data available */
+#define	ETIME		62	/* Timer expired */
+#define	ENOSR		63	/* Out of streams resources */
+#define	ENONET		64	/* Machine is not on the network */
+#define	ENOPKG		65	/* Package not installed */
+#define	EREMOTE		66	/* Object is remote */
+#define	ENOLINK		67	/* Link has been severed */
+#define	EADV		68	/* Advertise error */
+#define	ESRMNT		69	/* Srmount error */
+#define	ECOMM		70	/* Communication error on send */
+#define	EPROTO		71	/* Protocol error */
+#define	EMULTIHOP	72	/* Multihop attempted */
+#define	EDOTDOT		73	/* RFS specific error */
+#define	EBADMSG		74	/* Not a data message */
+#define	EOVERFLOW	75	/* Value too large for defined data type */
+#define	ENOTUNIQ	76	/* Name not unique on network */
+#define	EBADFD		77	/* File descriptor in bad state */
+#define	EREMCHG		78	/* Remote address changed */
+#define	ELIBACC		79	/* Can not access a needed shared library */
+#define	ELIBBAD		80	/* Accessing a corrupted shared library */
+#define	ELIBSCN		81	/* .lib section in a.out corrupted */
+#define	ELIBMAX		82	/* Attempting to link in too many shared libraries */
+#define	ELIBEXEC	83	/* Cannot exec a shared library directly */
+#define	EILSEQ		84	/* Illegal byte sequence */
+#define	ERESTART	85	/* Interrupted system call should be restarted */
+#define	ESTRPIPE	86	/* Streams pipe error */
+#define	EUSERS		87	/* Too many users */
+#define	ENOTSOCK	88	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	89	/* Destination address required */
+#define	EMSGSIZE	90	/* Message too long */
+#define	EPROTOTYPE	91	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	92	/* Protocol not available */
+#define	EPROTONOSUPPORT	93	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	94	/* Socket type not supported */
+#define	EOPNOTSUPP	95	/* Operation not supported on transport endpoint */
+#define	EPFNOSUPPORT	96	/* Protocol family not supported */
+#define	EAFNOSUPPORT	97	/* Address family not supported by protocol */
+#define	EADDRINUSE	98	/* Address already in use */
+#define	EADDRNOTAVAIL	99	/* Cannot assign requested address */
+#define	ENETDOWN	100	/* Network is down */
+#define	ENETUNREACH	101	/* Network is unreachable */
+#define	ENETRESET	102	/* Network dropped connection because of reset */
+#define	ECONNABORTED	103	/* Software caused connection abort */
+#define	ECONNRESET	104	/* Connection reset by peer */
+#define	ENOBUFS		105	/* No buffer space available */
+#define	EISCONN		106	/* Transport endpoint is already connected */
+#define	ENOTCONN	107	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	108	/* Cannot send after transport endpoint shutdown */
+#define	ETOOMANYREFS	109	/* Too many references: cannot splice */
+#define	ETIMEDOUT	110	/* Connection timed out */
+#define	ECONNREFUSED	111	/* Connection refused */
+#define	EHOSTDOWN	112	/* Host is down */
+#define	EHOSTUNREACH	113	/* No route to host */
+#define	EALREADY	114	/* Operation already in progress */
+#define	EINPROGRESS	115	/* Operation now in progress */
+#define	ESTALE		116	/* Stale NFS file handle */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EDQUOT		122	/* Quota exceeded */
+
+#define	ENOMEDIUM	123	/* No medium found */
+#define	EMEDIUMTYPE	124	/* Wrong medium type */
+#define	ECANCELED	125	/* Operation Canceled */
+#define	ENOKEY		126	/* Required key not available */
+#define	EKEYEXPIRED	127	/* Key has expired */
+#define	EKEYREVOKED	128	/* Key has been revoked */
+#define	EKEYREJECTED	129	/* Key was rejected by service */
+
+/* for robust mutexes */
+#define	EOWNERDEAD	130	/* Owner died */
+#define	ENOTRECOVERABLE	131	/* State not recoverable */
+
+#define ERFKILL		132	/* Operation not possible due to RF-kill */
+
+#define EHWPOISON	133	/* Memory page has hardware error */
+
+
+#define ENOTSUPP        524     /* Operation is not supported */
+
+#endif

RTL00_SDKV35a/component/soc/realtek/8195a/fwlib/src/hal_spi_flash_ram.c

@@ -933,11 +933,11 @@ VOID SpicNVMCalLoad(u8 BitMode, u8 CpuClk)
 	uint32_t spci_para; // [sp+Ch] [bp-2Ch]@4
 
 	v2 = CpuClk + 6 * BitMode;
-	v3 = 40006120;
-	v4 = 40006014;
+	v3 = 0x40006120;
+	v4 = 0x40006014;
 	v5 = BitMode;
 	v6 = CpuClk;
-	if (40006014 == 1) {
+	if (0x40006014 == 1) {
 		BitMode = HalGetCpuClk(BitMode, CpuClk);
 		if (BitMode == 166666666) {
 			40006120 |= 0x202u;
@@ -1012,39 +1012,38 @@ VOID HAL_FLASH_TEXT_SECTION SpicNVMCalStore(u8 BitMode, u8 CpuClk)
 			v4);
 	v5 = v4 + 6 * v3;
 	v6 = v5;
-	if (*(u32 *) (8 * v5 - 1744793472) == -1) {
+	if (*(u32 *) (8 * v5 + 0x98009080) == -1) {
 		LOBYTE (spci_para) = SpicInitParaAllClk[0][v5].BaudRate;
 		BYTE1 (spci_para) = SpicInitParaAllClk[0][v6].RdDummyCyle;
 		BYTE2 (spci_para) = SpicInitParaAllClk[0][v6].DelayLine;
 		BYTE3 (spci_para) = SpicInitParaAllClk[0][v6]._anon_0.Rsvd;
-		*(u32 *) (8 * v5 - 1744793472) = spci_para;
+		*(u32 *) (8 * v5 + 0x98009080) = spci_para;
 		if (SpicInitParaAllClk[0][v6].flashtype == 4)
 			SpicWaitOperationDoneRtl8195A(SpicInitPara, spci_para);
 		else
 			SpicWaitWipDoneRefinedRtl8195A(SpicInitPara, spci_para);
-		*(u32 *) (8 * v5 - 1744793468) = ~spci_para;
+		*(u32 *) (8 * v5 + 0x98009084) = ~spci_para;
 		v7 = SpicInitParaAllClk[0][v4 + 6 * v3].flashtype;
 		if (v7 == 4)
 			SpicWaitOperationDoneRtl8195A(SpicInitPara, 4);
 		else
 			SpicWaitWipDoneRefinedRtl8195A(SpicInitPara, v7);
-		DBG_SPIF_INFO("SpicNVMCalStore(BitMode %d, CPUClk %d): Calibration Stored: BaudRate=0x%x RdDummyCyle=0x%x DelayLine=0x%x\r\n",
+			DBG_SPIF_INFO("SpicNVMCalStore(BitMode %d, CPUClk %d): Calibration Stored: BaudRate=0x%x RdDummyCyle=0x%x DelayLine=0x%x\r\n",
 				v3, v4, SpicInitParaAllClk[0][v4 + 6 * v3].BaudRate,
 				SpicInitParaAllClk[0][v4 + 6 * v3].RdDummyCyle,
 				SpicInitParaAllClk[0][v4 + 6 * v3].DelayLine);
-		if (*(u32 *) (8 * v5 - 1744793472) != spci_para) {
-
-			v8 = *(u32 *) (8 * v5 - 1744793472);
+		if (*(u32 *) (8 * v5 + 0x98009080) != spci_para) {
+			v8 = *(u32 *) (8 * v5 + 0x98009080);
 			DBG_SPIF_ERR("SpicNVMCalStore Err(Offset=0x%x), Wr=0x%x Rd=0x%x \r\n",
 					8 * v5);
 		}
-		if (*(u32 *) (8 * v5 - 1744793468) != ~spci_para) {
-				v9 = *(u32 *) (8 * v5 - 1744793468);
+		if (*(u32 *) (8 * v5 + 0x98009084) != ~spci_para) {
+				v9 = *(u32 *) (8 * v5 + 0x98009084);
 				DBG_SPIF_ERR("SpicNVMCalStore Err(Offset=0x%x), Wr=0x%x Rd=0x%x \r\n",
 						v6 * 8 + 4);
 		}
 	} else DBG_SPIF_ERR("SpicNVMCalStore: The flash memory(@0x%x = 0x%x) is not able to be write, Erase it first!!\r\n",
-				v6 * 8 + 36992);
+				v6 * 8 + 0x9080);
 }
 
 //----- SpicCalibrationRtl8195A
@@ -1226,7 +1225,7 @@ extern BOOLEAN HAL_FLASH_TEXT_SECTION SpicFlashInitRtl8195A(u8 SpicBitMode)
 			DefRdDummyCycle = 8;
 		break;
 	default:
-		DBG_MISC_ERR("No Support SPI Mode!!!!!!!!\n");
+		DBG_MISC_ERR("No Support SPI Mode!\n");
 		SpicConfigAutoModeRtl8195A(SpicOneBitMode);
 		DefRdDummyCycle = 0;
 	}