diff --git a/flasher.mk b/flasher.mk
index bcb4373..4c111ed 100644
--- a/flasher.mk
+++ b/flasher.mk
@@ -109,13 +109,13 @@ _endgenbin:
 ifeq ($(FLASHER_TYPE), Jlink)
 
 reset:
-	@start $(JLINK_PATH)$(JLINK_EXE) -Device CORTEX-M3 -If SWD -Speed 1000 $(FLASHER_PATH)RTL_Reset.JLinkScript
+	@$(JLINK_PATH)$(JLINK_EXE) -Device CORTEX-M3 -If SWD -Speed 1000 $(FLASHER_PATH)RTL_Reset.JLinkScript
 
 runram:
-	@start $(JLINK_PATH)$(JLINK_EXE) -Device CORTEX-M3 -If SWD -Speed 1000 $(FLASHER_PATH)RTL_RunRAM.JLinkScript
+	@$(JLINK_PATH)$(JLINK_EXE) -Device CORTEX-M3 -If SWD -Speed 1000 $(FLASHER_PATH)RTL_RunRAM.JLinkScript
 
 readfullflash:
-	@start $(JLINK_PATH)$(JLINK_EXE) -Device CORTEX-M3 -If SWD -Speed 1000 $(FLASHER_PATH)RTL_FFlash.JLinkScript
+	@$(JLINK_PATH)$(JLINK_EXE) -Device CORTEX-M3 -If SWD -Speed 1000 $(FLASHER_PATH)RTL_FFlash.JLinkScript
 	
 
 flashburn:
@@ -128,24 +128,26 @@ flashburn:
 	@echo define call3>>$(FLASHER_PATH)flash_file.jlink
 	@echo FlasherWrite build/bin/ram_all.bin '$$'Image2Addr '$$'Image2Size>>$(FLASHER_PATH)flash_file.jlink
 	@echo end>>$(FLASHER_PATH)flash_file.jlink
-	@start $(JLINK_PATH)$(JLINK_GDBSRV) -device Cortex-M3 -if SWD -ir -endian little -speed 1000 
+	@cmd /K start $(JLINK_PATH)$(JLINK_GDBSRV) -device Cortex-M3 -if SWD -ir -endian little -speed 1000 
 	@$(GDB) -x $(FLASHER_PATH)gdb_wrflash.jlink
-	@taskkill /F /IM $(JLINK_GDBSRV)
+	#@taskkill /F /IM $(JLINK_GDBSRV)
 
 flashwebfs:
-	@echo set '$$'ImageSize = $(shell printf '0x%X\n' $$(stat --printf="%s" $(BIN_DIR)/webpages.espfs))>$(FLASHER_PATH)file_info.jlink
+	@echo define call1>$(FLASHER_PATH)file_info.jlink
+	@echo set '$$'ImageSize = $(shell printf '0x%X\n' $$(stat --printf="%s" $(BIN_DIR)/webpages.espfs))>>$(FLASHER_PATH)file_info.jlink
 	@echo set '$$'ImageAddr = 0x0D0000>>$(FLASHER_PATH)file_info.jlink
-	@echo define call1>>$(FLASHER_PATH)file_info.jlink
+	@echo end>>$(FLASHER_PATH)file_info.jlink
+	@echo define call2>>$(FLASHER_PATH)file_info.jlink
 	@echo FlasherWrite $(BIN_DIR)/webpages.espfs '$$'ImageAddr '$$'ImageSize>>$(FLASHER_PATH)file_info.jlink
 	@echo end>>$(FLASHER_PATH)file_info.jlink
-	@start $(JLINK_PATH)$(JLINK_GDBSRV) -device Cortex-M3 -if SWD -ir -endian little -speed 1000 
+	@cmd /K start $(JLINK_PATH)$(JLINK_GDBSRV) -device Cortex-M3 -if SWD -ir -endian little -speed 1000 
 	@$(GDB) -x $(FLASHER_PATH)gdb_wrfile.jlink
-	@taskkill /F /IM $(JLINK_GDBSRV)
+	#@taskkill /F /IM $(JLINK_GDBSRV)
 
 flash_OTA:
-	@start $(JLINK_PATH)$(JLINK_GDBSRV) -device Cortex-M3 -if SWD -ir -endian little -speed 1000 
+	@cmd /K start $(JLINK_PATH)$(JLINK_GDBSRV) -device Cortex-M3 -if SWD -ir -endian little -speed 1000 
 	@$(GDB) -x $(FLASHER_PATH)gdb_ota.jlink
-	@taskkill /F /IM $(JLINK_GDBSRV)
+	#@taskkill /F /IM $(JLINK_GDBSRV)
 
 else
 
@@ -170,10 +172,14 @@ flashwebfs:
 
 	
 reset:
+#	@$(JLINK_PATH)$(JLINK_EXE) -Device CORTEX-M3 -If SWD -Speed $(FLASHER_SPEED) flasher/RTLreset.JLinkScript
 	@$(OPENOCD) -f interface/$(FLASHER).cfg -c "transport select swd" -f $(FLASHER_PATH)rtl8710.ocd -c "init" -c "adapter_khz $(FLASHER_SPEED)" -c "reset halt" \
 	-c "rtl8710_reboot" -c shutdown
 
 runram:
+#	@$(JLINK_PATH)$(JLINK_GDB) -device Cortex-M3 -if SWD -ir -endian little -speed $(FLASHER_SPEED)
+#	@$(GDB) -x flasher/gdb_run_ram.jlink
+#	@taskkill.exe -F -IM $(JLINK_GDB)
 	@$(OPENOCD) -f interface/$(FLASHER).cfg -c "transport select swd" -f $(FLASHER_PATH)rtl8710.ocd -c "init" -c "adapter_khz $(FLASHER_SPEED)" -c "reset halt" \
 	-c "load_image $(RAM1R_IMAGE) 0x10000bc8 bin" \
 	-c "load_image $(RAM2_IMAGE) 0x10006000 bin" \
diff --git a/flasher/gdb_wrfile.jlink b/flasher/gdb_wrfile.jlink
index 361dc73..b81e8c4 100644
--- a/flasher/gdb_wrfile.jlink
+++ b/flasher/gdb_wrfile.jlink
@@ -36,12 +36,11 @@ if $rtl8710_flasher_capacity == 0
  monitor go
  FlasherWait
  set $id = {int}($rtl8710_flasher_buffer + 0x0C)
+ set $rtl8710_flasher_capacity = 1 << (($id >> 16) & 0x0ff)
  if ($id == 0x1420c2) 
-  set $rtl8710_flasher_capacity = 1 << (($id >> 16) & 0x0ff)
   printf "Flash ID = 0x%08x : MX25L8006E (%d kbytes)\n", $id, $rtl8710_flasher_capacity>>10
  else 
-  set $rtl8710_flasher_capacity = 1024*1024)
-  error "Flash ID = 0x%08x : ?\n", $id
+  printf "Flash ID = 0x%08x : (%d kbytes)\n", $id, $rtl8710_flasher_capacity>>10
  end
  printf "RTL8710 flasher initialized\n"
 else
@@ -142,15 +141,16 @@ SetClk83MHz
 SPI_Init
 FlasherInit
 FlasherLoad flasher/rtl8710_flasher.bin
-if $ImageSize != 0  
+call1
+if $ImageSize != 0
 set $ImageEnd = $ImageSize + $ImageAddr + 0x4000
 if $rtl8710_flasher_capacity >= $ImageEnd
  printf "Write Image size %d to Flash addr 0x%08x:\n", $ImageSize, $ImageAddr
- call1
-else   
+ call2
+else
  printf "Error: Image size is too big!\n"
 end
-else   
+else
  printf "Error: Image size is zero!\n"
 end
 quit