update

README.md

@@ -18,21 +18,25 @@ PWM Out GC_2 and PE_2 (2 канала по 96Bit на один исходный
 
 Console command (RX/TX GB1/GB0 38400 baud):<br>
 
-ATW0=SSID - задать имя AP<br>
-ATW1=PASSPHRASE - задать пароль AP<br>
-ATWC - Connect to an AES AP<br>
-ATWD - DisConnect AP<br>
-ATWS=URL,PORT - задать канал web-radio или http файл<br> 
-. Sample: ATWS=icecast.omroep.nl/3fm-sb-mp3,80<br>
-. ATWS=meuk.spritesserver.nl/Ii.Romanzeandante.mp3,80<br>
-. ATWS=?, ATWS=close, ATWS=save, ATWS=read<br>
-. ATWS=x,0 и ATWS=save - отключить старт<br>
-ATST - Mem/Task Info<br>
-ATOF - Отключить MP3<br>
-
-ATSD=hexaddr,count - Damp памяти/регистров с адреса...<br>
-ATWD=hexaddr,hexdata - Записать dword по адресу<br>
-
+CONSOLE COMMAND SET:<br>
+==============================<br>
+ATPN=<SSID>[,<PASSPHRASE>[,WEPKEY]]: WIFI Connect to AP<br>
+ATWS=<URL,PORT>: MP3 Connect to URL<br>
+ATWS=<c>[lose]: Close MP3<br>
+ATWS=<r>[ead]: Read MP3 URL<br>
+ATWS=<s>[ave]: Save MP3 URL<br>
+ATWS=<?>: URL Info<br>
+ATWD: WIFI Disconnect<br>
+ATST: Memory info<br>
+ATLW: Lwip Info<br>
+ATSB=<ADDRES(hex)>[,COUNT(dec)]: Dump byte register<br>
+ATSD=<ADDRES(hex)>[,COUNT(dec)]: Dump dword register<br>
+ATSW=<ADDRES(hex)>,<DATA(hex)>: Set register<br>
+ATDS=[TIME(ms)]: Deep sleep<br>
+ATON: Open connections<br>
+ATOF: Close connections<br>
+?: This Help<br>
+==============================<br>
 
 По умолчанию, в качестве JTAG используется J-Link STLink V2.<br>
 

RTL00_SDKV35a/component/common/api/wifi/wifi_conf.c

@@ -157,10 +157,10 @@ void patch_rltk_wlan_deinit(void) {
 	uint8_t chk;
 	if (rltk_wlan_info[0].enable || rltk_wlan_info[0].enable) {
 		_adapter *ad = rltk_wlan_info[0].dev->priv;
-		ad->bSurpriseRemoved = 1; // + 5892
-		rtw_wakeup_task(&ad->isrThread.task); // +5912
+		ad->bSurpriseRemoved = 1;
+		rtw_wakeup_task(&ad->isrThread.task);
 		while (1) {
-			save_and_cli(); // taskENTER_CRITICAL(); // vPortEnterCritical()
+			save_and_cli(); // = taskENTER_CRITICAL(); // = vPortEnterCritical()
 			rltk_wlan_info[0].enable = 0;
 			rltk_wlan_info[1].enable = 0;
 			chk = rltk_wlan_info[0].tx_busy + rltk_wlan_info[0].rx_busy

RTL00_SDKV35a/component/common/utilities/webserver.c

@@ -442,8 +442,6 @@ static void     vProcessConnection( struct netconn *pxNetCon );
 rtw_wifi_setting_t wifi_setting = {RTW_MODE_NONE, {0}, 0, RTW_SECURITY_OPEN, {0}};
 
 
-
-
 #ifndef WLAN0_NAME
   #define WLAN0_NAME		"wlan0"
 #endif

project/src/user/atcmd_user.c

@@ -163,7 +163,7 @@ void fATWC(int argc, char *argv[]){
 		wifi.password_len = strlen(password);
 	}
 	if(argc > 3) {
-		if((strlen(argv[3][0]) != 1 ) || (argv[3][0] <'0' || argv[3][0] >'3')) {
+		if((strlen(argv[3]) != 1 ) || (argv[3][0] <'0' || argv[3][0] >'3')) {
 			printf("%s: Wrong WEP key id. Must be one of 0,1,2, or 3.\n", argv[0]);
 			return;
 		}

project/src/user/main.c

@@ -516,9 +516,10 @@ void main(void)
 	}
 #ifdef CONFIG_WDG_ON_IDLE
 	HAL_PERI_ON_WRITE32(REG_SOC_FUNC_EN, HAL_PERI_ON_READ32(REG_SOC_FUNC_EN) & 0x1FFFFF);
-	WDGInitial(5000); // 5 s
+	WDGInitial(CONFIG_WDG_ON_IDLE * 1000); // 5 s
 	WDGStart();
 #endif
+
 #if (defined(CONFIG_CRYPTO_STARTUP) && (CONFIG_CRYPTO_STARTUP))
 	 if(rtl_cryptoEngine_init() != 0 ) {
 		 DBG_8195A("Crypto engine init failed!\n");