open-ameba/sdk/component/soc/realtek/8195a/fwlib/hal_i2s.h

348 lines
11 KiB
C
Raw Permalink Normal View History

2016-11-09 00:56:41 +00:00
/*
* Routines to access hardware
*
* Copyright (c) 2013 Realtek Semiconductor Corp.
*
* This module is a confidential and proprietary property of RealTek and
* possession or use of this module requires written permission of RealTek.
*/
#ifndef _HAL_I2S_H_
#define _HAL_I2S_H_
#include "rtl8195a_i2s.h"
/* User Define Flags */
#define I2S_MAX_ID 1 // valid I2S index 0 ~ I2S_MAX_ID
/**********************************************************************/
/* I2S HAL initial data structure */
typedef struct _HAL_I2S_INIT_DAT_ {
u8 I2SIdx; /*I2S index used*/
u8 I2SEn; /*I2S module enable tx/rx/tx+rx*/
u8 I2SMaster; /*I2S Master or Slave mode*/
u8 I2SWordLen; /*I2S Word length 16 or 24bits*/
u8 I2SChNum; /*I2S Channel number mono or stereo*/
u8 I2SPageNum; /*I2S Page Number 2~4*/
u16 I2SPageSize; /*I2S page Size 1~4096 word*/
u8 *I2STxData; /*I2S Tx data pointer*/
u8 *I2SRxData; /*I2S Rx data pointer*/
u32 I2STxIntrMSK; /*I2S Tx Interrupt Mask*/
u32 I2STxIntrClr; /*I2S Tx Interrupt register to clear */
u32 I2SRxIntrMSK; /*I2S Rx Interrupt Mask*/
u32 I2SRxIntrClr; /*I2S Rx Interrupt register to clear*/
u16 I2STxIdx; /*I2S TX page index */
u16 I2SRxIdx; /*I2S RX page index */
u16 I2SHWTxIdx; /*I2S HW TX page index */
u16 I2SHWRxIdx; /*I2S HW RX page index */
u16 I2SRate; /*I2S sample rate*/
u8 I2STRxAct; /*I2S tx rx act*/
}HAL_I2S_INIT_DAT, *PHAL_I2S_INIT_DAT;
/**********************************************************************/
/* I2S Data Structures */
/* I2S Module Selection */
typedef enum _I2S_MODULE_SEL_ {
I2S0_SEL = 0x0,
I2S1_SEL = 0x1,
}I2S_MODULE_SEL,*PI2S_MODULE_SEL;
/*
typedef struct _HAL_I2S_ADAPTER_ {
u32 Enable:1;
I2S_CTL_REG I2sCtl;
I2S_SETTING_REG I2sSetting;
u32 abc;
u8 I2sIndex;
}HAL_I2S_ADAPTER, *PHAL_I2S_ADAPTER;
*/
/* I2S HAL Operations */
typedef struct _HAL_I2S_OP_ {
RTK_STATUS (*HalI2SInit) (VOID *Data);
RTK_STATUS (*HalI2SDeInit) (VOID *Data);
RTK_STATUS (*HalI2STx) (VOID *Data, u8 *pBuff);
RTK_STATUS (*HalI2SRx) (VOID *Data, u8 *pBuff);
RTK_STATUS (*HalI2SEnable) (VOID *Data);
RTK_STATUS (*HalI2SIntrCtrl) (VOID *Data);
u32 (*HalI2SReadReg) (VOID *Data, u8 I2SReg);
RTK_STATUS (*HalI2SSetRate) (VOID *Data);
RTK_STATUS (*HalI2SSetWordLen) (VOID *Data);
RTK_STATUS (*HalI2SSetChNum) (VOID *Data);
RTK_STATUS (*HalI2SSetPageNum) (VOID *Data);
RTK_STATUS (*HalI2SSetPageSize) (VOID *Data);
RTK_STATUS (*HalI2SClrIntr) (VOID *Data);
RTK_STATUS (*HalI2SClrAllIntr) (VOID *Data);
RTK_STATUS (*HalI2SDMACtrl) (VOID *Data);
/*
VOID (*HalI2sOnOff)(VOID *Data);
BOOL (*HalI2sInit)(VOID *Data);
BOOL (*HalI2sSetting)(VOID *Data);
BOOL (*HalI2sEn)(VOID *Data);
BOOL (*HalI2sIsrEnAndDis) (VOID *Data);
BOOL (*HalI2sDumpReg)(VOID *Data);
BOOL (*HalI2s)(VOID *Data);
*/
}HAL_I2S_OP, *PHAL_I2S_OP;
/**********************************************************************/
/* I2S Pinmux Selection */
#if 0
typedef enum _I2S0_PINMUX_ {
I2S0_TO_S0 = 0x0,
I2S0_TO_S1 = 0x1,
I2S0_TO_S2 = 0x2,
}I2S0_PINMUX, *PI2S0_PINMUX;
typedef enum _I2S1_PINMUX_ {
I2S1_TO_S0 = 0x0,
I2S1_TO_S1 = 0x1,
}I2S1_PINMUX, *PI2S1_PINMUX;
#endif
typedef enum _I2S_PINMUX_ {
I2S_S0 = 0,
I2S_S1 = 1,
I2S_S2 = 2,
I2S_S3 = 3
}I2S_PINMUX, *PI2S_PINMUX;
/* I2S Module Status */
typedef enum _I2S_MODULE_STATUS_ {
I2S_DISABLE = 0x0,
I2S_ENABLE = 0x1,
}I2S_MODULE_STATUS, *PI2S_MODULE_STATUS;
/* I2S Device Status */
typedef enum _I2S_Device_STATUS_ {
I2S_STS_UNINITIAL = 0x00,
I2S_STS_INITIALIZED = 0x01,
I2S_STS_IDLE = 0x02,
I2S_STS_TX_READY = 0x03,
I2S_STS_TX_ING = 0x04,
I2S_STS_RX_READY = 0x05,
I2S_STS_RX_ING = 0x06,
I2S_STS_TRX_READY = 0x07,
I2S_STS_TRX_ING = 0x08,
I2S_STS_ERROR = 0x09,
}I2S_Device_STATUS, *PI2S_Device_STATUS;
/* I2S Feature Status */
typedef enum _I2S_FEATURE_STATUS_{
I2S_FEATURE_DISABLED = 0,
I2S_FEATURE_ENABLED = 1,
}I2S_FEATURE_STATUS,*PI2S_FEATURE_STATUS;
/* I2S Device Mode */
typedef enum _I2S_DEV_MODE_ {
I2S_MASTER_MODE = 0x0,
I2S_SLAVE_MODE = 0x1
}I2S_DEV_MODE, *PI2S_DEV_MODE;
/* I2S Word Length */
typedef enum _I2S_WORD_LEN_ {
I2S_WL_16 = 0x0,
I2S_WL_24 = 0x1,
}I2S_WORD_LEN, *PI2S_WORD_LEN;
/* I2S Bus Transmit/Receive */
typedef enum _I2S_DIRECTION_ {
I2S_ONLY_RX = 0x0,
I2S_ONLY_TX = 0x1,
I2S_TXRX = 0x2
}I2S_DIRECTION, *PI2S_DIRECTION;
/* I2S Channel number */
typedef enum _I2S_CH_NUM_ {
I2S_CH_STEREO = 0x0,
I2S_CH_RSVD = 0x1,
I2S_CH_MONO = 0x2
}I2S_CH_NUM, *PI2S_CH_NUM;
/* I2S Page number */
typedef enum _I2S_PAGE_NUM_ {
I2S_1PAGE = 0x0,
I2S_2PAGE = 0x1,
I2S_3PAGE = 0x2,
I2S_4PAGE = 0x3
}I2S_PAGE_NUM, *PI2S_PAGE_NUM;
/* I2S Sample rate*/
typedef enum _I2S_SAMPLE_RATE_ {
I2S_SR_8KHZ = 0x00, // /12
I2S_SR_16KHZ = 0x01, // /6
I2S_SR_24KHZ = 0x02, // /4
I2S_SR_32KHZ = 0x03, // /3
I2S_SR_48KHZ = 0x05, // /2
I2S_SR_96KHZ = 0x06, // x1, base 96kHz
I2S_SR_7p35KHZ = 0x10,
I2S_SR_11p02KHZ = 0x11,
I2S_SR_22p05KHZ = 0x12,
I2S_SR_29p4KHZ = 0x13,
I2S_SR_44p1KHZ = 0x15,
I2S_SR_88p2KHZ = 0x16 // x1, base 88200Hz
}I2S_SAMPLE_RATE, *PI2S_SAMPLE_RATE;
/* I2S TX interrupt mask/status */
typedef enum _I2S_TX_IMR_ {
I2S_TX_INT_PAGE0_OK = (1<<0),
I2S_TX_INT_PAGE1_OK = (1<<1),
I2S_TX_INT_PAGE2_OK = (1<<2),
I2S_TX_INT_PAGE3_OK = (1<<3),
I2S_TX_INT_FULL = (1<<4),
I2S_TX_INT_EMPTY = (1<<5)
} I2S_TX_IMR, *PI2S_TX_IMR;
/* I2S RX interrupt mask/status */
typedef enum _I2S_RX_IMR_ {
I2S_RX_INT_PAGE0_OK = (1<<0),
I2S_RX_INT_PAGE1_OK = (1<<1),
I2S_RX_INT_PAGE2_OK = (1<<2),
I2S_RX_INT_PAGE3_OK = (1<<3),
I2S_RX_INT_EMPTY = (1<<4),
I2S_RX_INT_FULL = (1<<5)
} I2S_RX_IMR, *PI2S_RX_IMR;
/* I2S User Callbacks */
typedef struct _SAL_I2S_USER_CB_{
VOID (*TXCB) (VOID *Data);
VOID (*TXCCB) (VOID *Data);
VOID (*RXCB) (VOID *Data);
VOID (*RXCCB) (VOID *Data);
VOID (*RDREQCB) (VOID *Data);
VOID (*ERRCB) (VOID *Data);
VOID (*GENCALLCB) (VOID *Data);
}SAL_I2S_USER_CB,*PSAL_I2S_USER_CB;
typedef struct _I2S_USER_CB_{
VOID (*TxCCB)(uint32_t id, char *pbuf);
u32 TxCBId;
VOID (*RxCCB)(uint32_t id, char *pbuf);
u32 RxCBId;
}I2S_USER_CB,*PI2S_USER_CB;
/* Software API Level I2S Handler */
typedef struct _HAL_I2S_ADAPTER_{
u8 DevNum; //I2S device number
u8 PinMux; //I2S pin mux seletion
u8 RSVD0; //Reserved
volatile u8 DevSts; //I2S device status
u32 RSVD2; //Reserved
u32 I2SExd; //I2S extended options:
//bit 0: I2C RESTART supported,
// 0 for NOT supported,
// 1 for supported
//bit 1: I2C General Call supported
// 0 for NOT supported,
// 1 for supported
//bit 2: I2C START Byte supported
// 0 for NOT supported,
// 1 for supported
//bit 3: I2C Slave-No-Ack
// supported
// 0 for NOT supported,
// 1 for supported
//bit 4: I2C bus loading,
// 0 for 100pf,
// 1 for 400pf
//bit 5: I2C slave ack to General
// Call
//bit 6: I2C User register address
//bit 7: I2C 2-Byte User register
// address
//bit 31~bit 8: Reserved
u32 ErrType; //
u32 TimeOut; //I2S IO Timeout count
PHAL_I2S_INIT_DAT pInitDat; //Pointer to I2S initial data struct
I2S_USER_CB UserCB; //Pointer to I2S User Callback
IRQ_HANDLE IrqHandle; // Irq Handler
u32* TxPageList[4]; // The Tx DAM buffer: pointer of each page
u32* RxPageList[4]; // The Tx DAM buffer: pointer of each page
}HAL_I2S_ADAPTER, *PHAL_I2S_ADAPTER;
typedef struct _HAL_I2S_DEF_SETTING_{
u8 I2SMaster; // Master or Slave mode
u8 DevSts; //I2S device status
u8 I2SChNum; //I2S Channel number mono or stereo
u8 I2SPageNum; //I2S Page number 2~4
u8 I2STRxAct; //I2S tx rx act, tx only or rx only or tx+rx
u8 I2SWordLen; //I2S Word length 16bit or 24bit
u16 I2SPageSize; //I2S Page size 1~4096 word
u16 I2SRate; //I2S sample rate 8k ~ 96khz
u32 I2STxIntrMSK; /*I2S Tx Interrupt Mask*/
u32 I2SRxIntrMSK; /*I2S Rx Interrupt Mask*/
}HAL_I2S_DEF_SETTING, *PHAL_I2S_DEF_SETTING;
/**********************************************************************/
HAL_Status
RtkI2SLoadDefault(IN VOID *Adapter, IN VOID *Setting);
HAL_Status
RtkI2SInit(IN VOID *Data);
HAL_Status
RtkI2SDeInit(IN VOID *Data);
HAL_Status
RtkI2SEnable(IN VOID *Data);
HAL_Status
RtkI2SDisable(IN VOID *Data);
extern HAL_Status
HalI2SInit( IN VOID *Data);
extern VOID
HalI2SDeInit( IN VOID *Data);
extern HAL_Status
HalI2SDisable( IN VOID *Data);
extern HAL_Status
HalI2SEnable( IN VOID *Data);
/**********************************************************************/
VOID I2S0ISRHandle(VOID *Data);
VOID I2S1ISRHandle(VOID *Data);
/**********************************************************************/
VOID HalI2SOpInit(
IN VOID *Data
);
#endif