j3d1/fiatlux
1
0
Fork 1
Code Issues 18 Pull requests Projects Releases 2 Wiki Activity

stash

Browse source
This commit is contained in:
j3d1 2023-02-12 07:40:58 +01:00
parent 94bdb71820
commit c4c414ebd3
57 changed files with 49795 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
.build.yml
View file

@ -17,8 +17,9 @@ steps:
commands:
- export PATH=$(pwd)/modules/sdk/xtensa-lx106-elf/bin:$PATH
- apt update
- apt install -y minify
- apt install -y minify gcc-arm-none-eabi binutils-arm-none-eabi
- make firmware -j$(nproc)
- make all -j$(nproc) -C peripherals/cc48x6
- name: pcb
image: setsoft/kicad_auto:ki6

1
peripherals/.gitignore vendored Normal file
View file

@ -0,0 +1 @@
*/version/

17
peripherals/cc48x6/Makefile Normal file
View file

@ -0,0 +1,17 @@
.PHONY: firmware bootloader flash
all: firmware bootloader
firmware:
+@make -C firmware all
bootloader:
+@make -C bootloader all
flash: firmware bootloader
@make -C bootloader flash
@make -C firmware flash
clean:
+@make -C firmware clean
+@make -C bootloader clean

2
peripherals/cc48x6/bootloader/.gitignore vendored Normal file
View file

@ -0,0 +1,2 @@
build/
compile_commands.json

5435
peripherals/cc48x6/bootloader/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f030x8.h Normal file
View file

File diff suppressed because it is too large Load diff

275
peripherals/cc48x6/bootloader/Drivers/CMSIS/Device/ST/STM32F0xx/Include/stm32f0xx.h Normal file
View file

@ -0,0 +1,275 @@
/**
******************************************************************************
* @file stm32f0xx.h
* @author MCD Application Team
* @brief CMSIS STM32F0xx Device Peripheral Access Layer Header File.
*
* The file is the unique include file that the application programmer
* is using in the C source code, usually in main.c. This file contains:
* - Configuration section that allows to select:
* - The STM32F0xx device used in the target application
* - To use or not the peripheral’s drivers in application code(i.e.
* code will be based on direct access to peripheral’s registers
* rather than drivers API), this option is controlled by
* "#define USE_HAL_DRIVER"
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f0xx
* @{
*/
#ifndef __STM32F0xx_H
#define __STM32F0xx_H
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/** @addtogroup Library_configuration_section
* @{
*/
/**
* @brief STM32 Family
*/
#if !defined (STM32F0)
#define STM32F0
#endif /* STM32F0 */
/** Uncomment the line below according to the target STM32 device used in your application.
* stm32f0xxxx.h file contains:
* - All the peripheral register's definitions, bits definitions and memory mapping for STM32F0xxxx devices
* - IRQ channel definition
* - Peripheral memory mapping and physical registers address definition
* - Peripheral pointer declaration and driver header file inclusion
* - Product miscellaneous configuration: assert macros…
* Note: These CMSIS drivers (stm32f0xxxx.h) are always supporting features of the sub-family’s superset.
*/
#if !defined (STM32F030x6) && !defined (STM32F030x8) && \
!defined (STM32F031x6) && !defined (STM32F038xx) && \
!defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \
!defined (STM32F051x8) && !defined (STM32F058xx) && \
!defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \
!defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC)
/* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
/* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */
/* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
/* #define STM32F038xx */ /*!< STM32F038xx Devices (STM32F038xx microcontrollers where the Flash memory is 32 Kbytes) */
/* #define STM32F042x6 */ /*!< STM32F042x4, STM32F042x6 Devices (STM32F042xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
/* #define STM32F048xx */ /*!< STM32F048xx Devices (STM32F048xx microcontrollers where the Flash memory is 32 Kbytes) */
/* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */
/* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */
/* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
/* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
/* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
/* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
/* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */
/* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */
/* #define STM32F091xC */ /*!< STM32F091xB, STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory ranges between 128 and 256 Kbytes) */
/* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */
#endif
/* Legacy aliases */
#if defined (STM32F048x6)
#define STM32F048xx
#endif /* STM32F048x6 */
/* Tip: To avoid modifying this file each time you need to switch between these
devices, you can define the device in your toolchain compiler preprocessor.
*/
#if !defined (USE_HAL_DRIVER)
/**
* @brief Comment the line below if you will not use the peripherals drivers.
In this case, these drivers will not be included and the application code will
be based on direct access to peripherals registers
*/
/*#define USE_HAL_DRIVER */
#endif /* USE_HAL_DRIVER */
/**
* @brief CMSIS Device version number V2.3.6
*/
#define __STM32F0_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
#define __STM32F0_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
#define __STM32F0_DEVICE_VERSION_SUB2 (0x06) /*!< [15:8] sub2 version */
#define __STM32F0_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32F0_DEVICE_VERSION ((__STM32F0_DEVICE_VERSION_MAIN << 24)\
|(__STM32F0_DEVICE_VERSION_SUB1 << 16)\
|(__STM32F0_DEVICE_VERSION_SUB2 << 8 )\
|(__STM32F0_DEVICE_VERSION_RC))
/**
* @}
*/
/** @addtogroup Device_Included
* @{
*/
#if defined(STM32F030x6)
#include "stm32f030x6.h"
#elif defined(STM32F030x8)
#include "stm32f030x8.h"
#elif defined(STM32F031x6)
#include "stm32f031x6.h"
#elif defined(STM32F038xx)
#include "stm32f038xx.h"
#elif defined(STM32F042x6)
#include "stm32f042x6.h"
#elif defined(STM32F048xx)
#include "stm32f048xx.h"
#elif defined(STM32F051x8)
#include "stm32f051x8.h"
#elif defined(STM32F058xx)
#include "stm32f058xx.h"
#elif defined(STM32F070x6)
#include "stm32f070x6.h"
#elif defined(STM32F070xB)
#include "stm32f070xb.h"
#elif defined(STM32F071xB)
#include "stm32f071xb.h"
#elif defined(STM32F072xB)
#include "stm32f072xb.h"
#elif defined(STM32F078xx)
#include "stm32f078xx.h"
#elif defined(STM32F091xC)
#include "stm32f091xc.h"
#elif defined(STM32F098xx)
#include "stm32f098xx.h"
#elif defined(STM32F030xC)
#include "stm32f030xc.h"
#else
#error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)"
#endif
/**
* @}
*/
/** @addtogroup Exported_types
* @{
*/
typedef enum
{
RESET = 0U,
SET = !RESET
} FlagStatus, ITStatus;
typedef enum
{
DISABLE = 0U,
ENABLE = !DISABLE
} FunctionalState;
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
typedef enum
{
SUCCESS = 0U,
ERROR = !SUCCESS
} ErrorStatus;
/**
* @}
*/
/** @addtogroup Exported_macros
* @{
*/
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
#define READ_BIT(REG, BIT) ((REG) & (BIT))
#define CLEAR_REG(REG) ((REG) = (0x0))
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
#define READ_REG(REG) ((REG))
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
/* Use of interrupt control for register exclusive access */
/* Atomic 32-bit register access macro to set one or several bits */
#define ATOMIC_SET_BIT(REG, BIT) \
do { \
uint32_t primask; \
primask = __get_PRIMASK(); \
__set_PRIMASK(1); \
SET_BIT((REG), (BIT)); \
__set_PRIMASK(primask); \
} while(0)
/* Atomic 32-bit register access macro to clear one or several bits */
#define ATOMIC_CLEAR_BIT(REG, BIT) \
do { \
uint32_t primask; \
primask = __get_PRIMASK(); \
__set_PRIMASK(1); \
CLEAR_BIT((REG), (BIT)); \
__set_PRIMASK(primask); \
} while(0)
/* Atomic 32-bit register access macro to clear and set one or several bits */
#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \
do { \
uint32_t primask; \
primask = __get_PRIMASK(); \
__set_PRIMASK(1); \
MODIFY_REG((REG), (CLEARMSK), (SETMASK)); \
__set_PRIMASK(primask); \
} while(0)
/* Atomic 16-bit register access macro to set one or several bits */
#define ATOMIC_SETH_BIT(REG, BIT) ATOMIC_SET_BIT(REG, BIT) \
/* Atomic 16-bit register access macro to clear one or several bits */
#define ATOMIC_CLEARH_BIT(REG, BIT) ATOMIC_CLEAR_BIT(REG, BIT) \
/* Atomic 16-bit register access macro to clear and set one or several bits */
#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \
/**
* @}
*/
#if defined (USE_HAL_DRIVER)
#include "stm32f0xx_hal.h"
#endif /* USE_HAL_DRIVER */
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* __STM32F0xx_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

105
peripherals/cc48x6/bootloader/Drivers/CMSIS/Device/ST/STM32F0xx/Include/system_stm32f0xx.h Normal file
View file

@ -0,0 +1,105 @@
/**
******************************************************************************
* @file system_stm32f0xx.h
* @author MCD Application Team
* @brief CMSIS Cortex-M0 Device System Source File for STM32F0xx devices.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f0xx_system
* @{
*/
/**
* @brief Define to prevent recursive inclusion
*/
#ifndef __SYSTEM_STM32F0XX_H
#define __SYSTEM_STM32F0XX_H
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup STM32F0xx_System_Includes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F0xx_System_Exported_types
* @{
*/
/* This variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
3) by calling HAL API function HAL_RCC_GetHCLKFreq()
3) by calling HAL API function HAL_RCC_ClockConfig()
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
/**
* @}
*/
/** @addtogroup STM32F0xx_System_Exported_Constants
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F0xx_System_Exported_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F0xx_System_Exported_Functions
* @{
*/
extern void SystemInit(void);
extern void SystemCoreClockUpdate(void);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /*__SYSTEM_STM32F0XX_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

83
peripherals/cc48x6/bootloader/Drivers/CMSIS/Device/ST/STM32F0xx/License.md Normal file
View file

@ -0,0 +1,83 @@
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.
2. Grant of Copyright License.
Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
3. Grant of Patent License.
Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
4. Redistribution.
You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:
1.You must give any other recipients of the Work or Derivative Works a copy of this License; and
2.You must cause any modified files to carry prominent notices stating that You changed the files; and
3.You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
4.If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
5. Submission of Contributions.
Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
6. Trademarks.
This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty.
Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
8. Limitation of Liability.
In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability.
While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX:
Copyright [2019] [STMicroelectronics]
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

865
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/cmsis_armcc.h Normal file
View file

@ -0,0 +1,865 @@
/**************************************************************************//**
* @file cmsis_armcc.h
* @brief CMSIS compiler ARMCC (Arm Compiler 5) header file
* @version V5.0.4
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __CMSIS_ARMCC_H
#define __CMSIS_ARMCC_H
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
#error "Please use Arm Compiler Toolchain V4.0.677 or later!"
#endif
/* CMSIS compiler control architecture macros */
#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \
(defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) )
#define __ARM_ARCH_6M__ 1
#endif
#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1))
#define __ARM_ARCH_7M__ 1
#endif
#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1))
#define __ARM_ARCH_7EM__ 1
#endif
/* __ARM_ARCH_8M_BASE__ not applicable */
/* __ARM_ARCH_8M_MAIN__ not applicable */
/* CMSIS compiler specific defines */
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE __inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static __inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE static __forceinline
#endif
#ifndef __NO_RETURN
#define __NO_RETURN __declspec(noreturn)
#endif
#ifndef __USED
#define __USED __attribute__((used))
#endif
#ifndef __WEAK
#define __WEAK __attribute__((weak))
#endif
#ifndef __PACKED
#define __PACKED __attribute__((packed))
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT __packed struct
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION __packed union
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
#define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x)))
#endif
#ifndef __UNALIGNED_UINT16_WRITE
#define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
#define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr)))
#endif
#ifndef __UNALIGNED_UINT32_WRITE
#define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
#define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr)))
#endif
#ifndef __ALIGNED
#define __ALIGNED(x) __attribute__((aligned(x)))
#endif
#ifndef __RESTRICT
#define __RESTRICT __restrict
#endif
/* ########################### Core Function Access ########################### */
/** \ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
@{
*/
/**
\brief Enable IRQ Interrupts
\details Enables IRQ interrupts by clearing the I-bit in the CPSR.
Can only be executed in Privileged modes.
*/
/* intrinsic void __enable_irq(); */
/**
\brief Disable IRQ Interrupts
\details Disables IRQ interrupts by setting the I-bit in the CPSR.
Can only be executed in Privileged modes.
*/
/* intrinsic void __disable_irq(); */
/**
\brief Get Control Register
\details Returns the content of the Control Register.
\return Control Register value
*/
__STATIC_INLINE uint32_t __get_CONTROL(void)
{
register uint32_t __regControl __ASM("control");
return(__regControl);
}
/**
\brief Set Control Register
\details Writes the given value to the Control Register.
\param [in] control Control Register value to set
*/
__STATIC_INLINE void __set_CONTROL(uint32_t control)
{
register uint32_t __regControl __ASM("control");
__regControl = control;
}
/**
\brief Get IPSR Register
\details Returns the content of the IPSR Register.
\return IPSR Register value
*/
__STATIC_INLINE uint32_t __get_IPSR(void)
{
register uint32_t __regIPSR __ASM("ipsr");
return(__regIPSR);
}
/**
\brief Get APSR Register
\details Returns the content of the APSR Register.
\return APSR Register value
*/
__STATIC_INLINE uint32_t __get_APSR(void)
{
register uint32_t __regAPSR __ASM("apsr");
return(__regAPSR);
}
/**
\brief Get xPSR Register
\details Returns the content of the xPSR Register.
\return xPSR Register value
*/
__STATIC_INLINE uint32_t __get_xPSR(void)
{
register uint32_t __regXPSR __ASM("xpsr");
return(__regXPSR);
}
/**
\brief Get Process Stack Pointer
\details Returns the current value of the Process Stack Pointer (PSP).
\return PSP Register value
*/
__STATIC_INLINE uint32_t __get_PSP(void)
{
register uint32_t __regProcessStackPointer __ASM("psp");
return(__regProcessStackPointer);
}
/**
\brief Set Process Stack Pointer
\details Assigns the given value to the Process Stack Pointer (PSP).
\param [in] topOfProcStack Process Stack Pointer value to set
*/
__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
{
register uint32_t __regProcessStackPointer __ASM("psp");
__regProcessStackPointer = topOfProcStack;
}
/**
\brief Get Main Stack Pointer
\details Returns the current value of the Main Stack Pointer (MSP).
\return MSP Register value
*/
__STATIC_INLINE uint32_t __get_MSP(void)
{
register uint32_t __regMainStackPointer __ASM("msp");
return(__regMainStackPointer);
}
/**
\brief Set Main Stack Pointer
\details Assigns the given value to the Main Stack Pointer (MSP).
\param [in] topOfMainStack Main Stack Pointer value to set
*/
__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
{
register uint32_t __regMainStackPointer __ASM("msp");
__regMainStackPointer = topOfMainStack;
}
/**
\brief Get Priority Mask
\details Returns the current state of the priority mask bit from the Priority Mask Register.
\return Priority Mask value
*/
__STATIC_INLINE uint32_t __get_PRIMASK(void)
{
register uint32_t __regPriMask __ASM("primask");
return(__regPriMask);
}
/**
\brief Set Priority Mask
\details Assigns the given value to the Priority Mask Register.
\param [in] priMask Priority Mask
*/
__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
{
register uint32_t __regPriMask __ASM("primask");
__regPriMask = (priMask);
}
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
/**
\brief Enable FIQ
\details Enables FIQ interrupts by clearing the F-bit in the CPSR.
Can only be executed in Privileged modes.
*/
#define __enable_fault_irq __enable_fiq
/**
\brief Disable FIQ
\details Disables FIQ interrupts by setting the F-bit in the CPSR.
Can only be executed in Privileged modes.
*/
#define __disable_fault_irq __disable_fiq
/**
\brief Get Base Priority
\details Returns the current value of the Base Priority register.
\return Base Priority register value
*/
__STATIC_INLINE uint32_t __get_BASEPRI(void)
{
register uint32_t __regBasePri __ASM("basepri");
return(__regBasePri);
}
/**
\brief Set Base Priority
\details Assigns the given value to the Base Priority register.
\param [in] basePri Base Priority value to set
*/
__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
{
register uint32_t __regBasePri __ASM("basepri");
__regBasePri = (basePri & 0xFFU);
}
/**
\brief Set Base Priority with condition
\details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
or the new value increases the BASEPRI priority level.
\param [in] basePri Base Priority value to set
*/
__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
{
register uint32_t __regBasePriMax __ASM("basepri_max");
__regBasePriMax = (basePri & 0xFFU);
}
/**
\brief Get Fault Mask
\details Returns the current value of the Fault Mask register.
\return Fault Mask register value
*/
__STATIC_INLINE uint32_t __get_FAULTMASK(void)
{
register uint32_t __regFaultMask __ASM("faultmask");
return(__regFaultMask);
}
/**
\brief Set Fault Mask
\details Assigns the given value to the Fault Mask register.
\param [in] faultMask Fault Mask value to set
*/
__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
{
register uint32_t __regFaultMask __ASM("faultmask");
__regFaultMask = (faultMask & (uint32_t)1U);
}
#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
/**
\brief Get FPSCR
\details Returns the current value of the Floating Point Status/Control register.
\return Floating Point Status/Control register value
*/
__STATIC_INLINE uint32_t __get_FPSCR(void)
{
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
register uint32_t __regfpscr __ASM("fpscr");
return(__regfpscr);
#else
return(0U);
#endif
}
/**
\brief Set FPSCR
\details Assigns the given value to the Floating Point Status/Control register.
\param [in] fpscr Floating Point Status/Control value to set
*/
__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
{
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
register uint32_t __regfpscr __ASM("fpscr");
__regfpscr = (fpscr);
#else
(void)fpscr;
#endif
}
/*@} end of CMSIS_Core_RegAccFunctions */
/* ########################## Core Instruction Access ######################### */
/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
Access to dedicated instructions
@{
*/
/**
\brief No Operation
\details No Operation does nothing. This instruction can be used for code alignment purposes.
*/
#define __NOP __nop
/**
\brief Wait For Interrupt
\details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
*/
#define __WFI __wfi
/**
\brief Wait For Event
\details Wait For Event is a hint instruction that permits the processor to enter
a low-power state until one of a number of events occurs.
*/
#define __WFE __wfe
/**
\brief Send Event
\details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
*/
#define __SEV __sev
/**
\brief Instruction Synchronization Barrier
\details Instruction Synchronization Barrier flushes the pipeline in the processor,
so that all instructions following the ISB are fetched from cache or memory,
after the instruction has been completed.
*/
#define __ISB() do {\
__schedule_barrier();\
__isb(0xF);\
__schedule_barrier();\
} while (0U)
/**
\brief Data Synchronization Barrier
\details Acts as a special kind of Data Memory Barrier.
It completes when all explicit memory accesses before this instruction complete.
*/
#define __DSB() do {\
__schedule_barrier();\
__dsb(0xF);\
__schedule_barrier();\
} while (0U)
/**
\brief Data Memory Barrier
\details Ensures the apparent order of the explicit memory operations before
and after the instruction, without ensuring their completion.
*/
#define __DMB() do {\
__schedule_barrier();\
__dmb(0xF);\
__schedule_barrier();\
} while (0U)
/**
\brief Reverse byte order (32 bit)
\details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412.
\param [in] value Value to reverse
\return Reversed value
*/
#define __REV __rev
/**
\brief Reverse byte order (16 bit)
\details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856.
\param [in] value Value to reverse
\return Reversed value
*/
#ifndef __NO_EMBEDDED_ASM
__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
{
rev16 r0, r0
bx lr
}
#endif
/**
\brief Reverse byte order (16 bit)
\details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000.
\param [in] value Value to reverse
\return Reversed value
*/
#ifndef __NO_EMBEDDED_ASM
__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value)
{
revsh r0, r0
bx lr
}
#endif
/**
\brief Rotate Right in unsigned value (32 bit)
\details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
\param [in] op1 Value to rotate
\param [in] op2 Number of Bits to rotate
\return Rotated value
*/
#define __ROR __ror
/**
\brief Breakpoint
\details Causes the processor to enter Debug state.
Debug tools can use this to investigate system state when the instruction at a particular address is reached.
\param [in] value is ignored by the processor.
If required, a debugger can use it to store additional information about the breakpoint.
*/
#define __BKPT(value) __breakpoint(value)
/**
\brief Reverse bit order of value
\details Reverses the bit order of the given value.
\param [in] value Value to reverse
\return Reversed value
*/
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
#define __RBIT __rbit
#else
__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
{
uint32_t result;
uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */
result = value; /* r will be reversed bits of v; first get LSB of v */
for (value >>= 1U; value != 0U; value >>= 1U)
{
result <<= 1U;
result |= value & 1U;
s--;
}
result <<= s; /* shift when v's highest bits are zero */
return result;
}
#endif
/**
\brief Count leading zeros
\details Counts the number of leading zeros of a data value.
\param [in] value Value to count the leading zeros
\return number of leading zeros in value
*/
#define __CLZ __clz
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
/**
\brief LDR Exclusive (8 bit)
\details Executes a exclusive LDR instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
#else
#define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop")
#endif
/**
\brief LDR Exclusive (16 bit)
\details Executes a exclusive LDR instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
#else
#define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop")
#endif
/**
\brief LDR Exclusive (32 bit)
\details Executes a exclusive LDR instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
#else
#define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop")
#endif
/**
\brief STR Exclusive (8 bit)
\details Executes a exclusive STR instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __STREXB(value, ptr) __strex(value, ptr)
#else
#define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
#endif
/**
\brief STR Exclusive (16 bit)
\details Executes a exclusive STR instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __STREXH(value, ptr) __strex(value, ptr)
#else
#define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
#endif
/**
\brief STR Exclusive (32 bit)
\details Executes a exclusive STR instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
\return 0 Function succeeded
\return 1 Function failed
*/
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
#define __STREXW(value, ptr) __strex(value, ptr)
#else
#define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
#endif
/**
\brief Remove the exclusive lock
\details Removes the exclusive lock which is created by LDREX.
*/
#define __CLREX __clrex
/**
\brief Signed Saturate
\details Saturates a signed value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (1..32)
\return Saturated value
*/
#define __SSAT __ssat
/**
\brief Unsigned Saturate
\details Saturates an unsigned value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (0..31)
\return Saturated value
*/
#define __USAT __usat
/**
\brief Rotate Right with Extend (32 bit)
\details Moves each bit of a bitstring right by one bit.
The carry input is shifted in at the left end of the bitstring.
\param [in] value Value to rotate
\return Rotated value
*/
#ifndef __NO_EMBEDDED_ASM
__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
{
rrx r0, r0
bx lr
}
#endif
/**
\brief LDRT Unprivileged (8 bit)
\details Executes a Unprivileged LDRT instruction for 8 bit value.
\param [in] ptr Pointer to data
\return value of type uint8_t at (*ptr)
*/
#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
/**
\brief LDRT Unprivileged (16 bit)
\details Executes a Unprivileged LDRT instruction for 16 bit values.
\param [in] ptr Pointer to data
\return value of type uint16_t at (*ptr)
*/
#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
/**
\brief LDRT Unprivileged (32 bit)
\details Executes a Unprivileged LDRT instruction for 32 bit values.
\param [in] ptr Pointer to data
\return value of type uint32_t at (*ptr)
*/
#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
/**
\brief STRT Unprivileged (8 bit)
\details Executes a Unprivileged STRT instruction for 8 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
#define __STRBT(value, ptr) __strt(value, ptr)
/**
\brief STRT Unprivileged (16 bit)
\details Executes a Unprivileged STRT instruction for 16 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
#define __STRHT(value, ptr) __strt(value, ptr)
/**
\brief STRT Unprivileged (32 bit)
\details Executes a Unprivileged STRT instruction for 32 bit values.
\param [in] value Value to store
\param [in] ptr Pointer to location
*/
#define __STRT(value, ptr) __strt(value, ptr)
#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
/**
\brief Signed Saturate
\details Saturates a signed value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (1..32)
\return Saturated value
*/
__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
{
if ((sat >= 1U) && (sat <= 32U))
{
const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
const int32_t min = -1 - max ;
if (val > max)
{
return max;
}
else if (val < min)
{
return min;
}
}
return val;
}
/**
\brief Unsigned Saturate
\details Saturates an unsigned value.
\param [in] value Value to be saturated
\param [in] sat Bit position to saturate to (0..31)
\return Saturated value
*/
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
{
if (sat <= 31U)
{
const uint32_t max = ((1U << sat) - 1U);
if (val > (int32_t)max)
{
return max;
}
else if (val < 0)
{
return 0U;
}
}
return (uint32_t)val;
}
#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
/* ################### Compiler specific Intrinsics ########################### */
/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
Access to dedicated SIMD instructions
@{
*/
#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
#define __SADD8 __sadd8
#define __QADD8 __qadd8
#define __SHADD8 __shadd8
#define __UADD8 __uadd8
#define __UQADD8 __uqadd8
#define __UHADD8 __uhadd8
#define __SSUB8 __ssub8
#define __QSUB8 __qsub8
#define __SHSUB8 __shsub8
#define __USUB8 __usub8
#define __UQSUB8 __uqsub8
#define __UHSUB8 __uhsub8
#define __SADD16 __sadd16
#define __QADD16 __qadd16
#define __SHADD16 __shadd16
#define __UADD16 __uadd16
#define __UQADD16 __uqadd16
#define __UHADD16 __uhadd16
#define __SSUB16 __ssub16
#define __QSUB16 __qsub16
#define __SHSUB16 __shsub16
#define __USUB16 __usub16
#define __UQSUB16 __uqsub16
#define __UHSUB16 __uhsub16
#define __SASX __sasx
#define __QASX __qasx
#define __SHASX __shasx
#define __UASX __uasx
#define __UQASX __uqasx
#define __UHASX __uhasx
#define __SSAX __ssax
#define __QSAX __qsax
#define __SHSAX __shsax
#define __USAX __usax
#define __UQSAX __uqsax
#define __UHSAX __uhsax
#define __USAD8 __usad8
#define __USADA8 __usada8
#define __SSAT16 __ssat16
#define __USAT16 __usat16
#define __UXTB16 __uxtb16
#define __UXTAB16 __uxtab16
#define __SXTB16 __sxtb16
#define __SXTAB16 __sxtab16
#define __SMUAD __smuad
#define __SMUADX __smuadx
#define __SMLAD __smlad
#define __SMLADX __smladx
#define __SMLALD __smlald
#define __SMLALDX __smlaldx
#define __SMUSD __smusd
#define __SMUSDX __smusdx
#define __SMLSD __smlsd
#define __SMLSDX __smlsdx
#define __SMLSLD __smlsld
#define __SMLSLDX __smlsldx
#define __SEL __sel
#define __QADD __qadd
#define __QSUB __qsub
#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
((int64_t)(ARG3) << 32U) ) >> 32U))
#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
/*@} end of group CMSIS_SIMD_intrinsics */
#endif /* __CMSIS_ARMCC_H */

1869
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/cmsis_armclang.h Normal file
View file

File diff suppressed because it is too large Load diff

266
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/cmsis_compiler.h Normal file
View file

@ -0,0 +1,266 @@
/**************************************************************************//**
* @file cmsis_compiler.h
* @brief CMSIS compiler generic header file
* @version V5.0.4
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef __CMSIS_COMPILER_H
#define __CMSIS_COMPILER_H
#include <stdint.h>
/*
* Arm Compiler 4/5
*/
#if defined ( __CC_ARM )
#include "cmsis_armcc.h"
/*
* Arm Compiler 6 (armclang)
*/
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#include "cmsis_armclang.h"
/*
* GNU Compiler
*/
#elif defined ( __GNUC__ )
#include "cmsis_gcc.h"
/*
* IAR Compiler
*/
#elif defined ( __ICCARM__ )
#include <cmsis_iccarm.h>
/*
* TI Arm Compiler
*/
#elif defined ( __TI_ARM__ )
#include <cmsis_ccs.h>
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __STATIC_INLINE
#endif
#ifndef __NO_RETURN
#define __NO_RETURN __attribute__((noreturn))
#endif
#ifndef __USED
#define __USED __attribute__((used))
#endif
#ifndef __WEAK
#define __WEAK __attribute__((weak))
#endif
#ifndef __PACKED
#define __PACKED __attribute__((packed))
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT struct __attribute__((packed))
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION union __attribute__((packed))
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
struct __attribute__((packed)) T_UINT32 { uint32_t v; };
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
#endif
#ifndef __ALIGNED
#define __ALIGNED(x) __attribute__((aligned(x)))
#endif
#ifndef __RESTRICT
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
#define __RESTRICT
#endif
/*
* TASKING Compiler
*/
#elif defined ( __TASKING__ )
/*
* The CMSIS functions have been implemented as intrinsics in the compiler.
* Please use "carm -?i" to get an up to date list of all intrinsics,
* Including the CMSIS ones.
*/
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __STATIC_INLINE
#endif
#ifndef __NO_RETURN
#define __NO_RETURN __attribute__((noreturn))
#endif
#ifndef __USED
#define __USED __attribute__((used))
#endif
#ifndef __WEAK
#define __WEAK __attribute__((weak))
#endif
#ifndef __PACKED
#define __PACKED __packed__
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT struct __packed__
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION union __packed__
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
struct __packed__ T_UINT32 { uint32_t v; };
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
#endif
#ifndef __ALIGNED
#define __ALIGNED(x) __align(x)
#endif
#ifndef __RESTRICT
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
#define __RESTRICT
#endif
/*
* COSMIC Compiler
*/
#elif defined ( __CSMC__ )
#include <cmsis_csm.h>
#ifndef __ASM
#define __ASM _asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __STATIC_INLINE
#endif
#ifndef __NO_RETURN
// NO RETURN is automatically detected hence no warning here
#define __NO_RETURN
#endif
#ifndef __USED
#warning No compiler specific solution for __USED. __USED is ignored.
#define __USED
#endif
#ifndef __WEAK
#define __WEAK __weak
#endif
#ifndef __PACKED
#define __PACKED @packed
#endif
#ifndef __PACKED_STRUCT
#define __PACKED_STRUCT @packed struct
#endif
#ifndef __PACKED_UNION
#define __PACKED_UNION @packed union
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
@packed struct T_UINT32 { uint32_t v; };
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT16_READ
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
#endif
#ifndef __UNALIGNED_UINT32_READ
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
#endif
#ifndef __ALIGNED
#warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored.
#define __ALIGNED(x)
#endif
#ifndef __RESTRICT
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
#define __RESTRICT
#endif
#else
#error Unknown compiler.
#endif
#endif /* __CMSIS_COMPILER_H */

2085
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/cmsis_gcc.h Normal file
View file

File diff suppressed because it is too large Load diff

935
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/cmsis_iccarm.h Normal file
View file

@ -0,0 +1,935 @@
/**************************************************************************//**
* @file cmsis_iccarm.h
* @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file
* @version V5.0.7
* @date 19. June 2018
******************************************************************************/
//------------------------------------------------------------------------------
//
// Copyright (c) 2017-2018 IAR Systems
//
// Licensed under the Apache License, Version 2.0 (the "License")
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
//------------------------------------------------------------------------------
#ifndef __CMSIS_ICCARM_H__
#define __CMSIS_ICCARM_H__
#ifndef __ICCARM__
#error This file should only be compiled by ICCARM
#endif
#pragma system_include
#define __IAR_FT _Pragma("inline=forced") __intrinsic
#if (__VER__ >= 8000000)
#define __ICCARM_V8 1
#else
#define __ICCARM_V8 0
#endif
#ifndef __ALIGNED
#if __ICCARM_V8
#define __ALIGNED(x) __attribute__((aligned(x)))
#elif (__VER__ >= 7080000)
/* Needs IAR language extensions */
#define __ALIGNED(x) __attribute__((aligned(x)))
#else
#warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored.
#define __ALIGNED(x)
#endif
#endif
/* Define compiler macros for CPU architecture, used in CMSIS 5.
*/
#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__
/* Macros already defined */
#else
#if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__)
#define __ARM_ARCH_8M_MAIN__ 1
#elif defined(__ARM8M_BASELINE__)
#define __ARM_ARCH_8M_BASE__ 1
#elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M'
#if __ARM_ARCH == 6
#define __ARM_ARCH_6M__ 1
#elif __ARM_ARCH == 7
#if __ARM_FEATURE_DSP
#define __ARM_ARCH_7EM__ 1
#else
#define __ARM_ARCH_7M__ 1
#endif
#endif /* __ARM_ARCH */
#endif /* __ARM_ARCH_PROFILE == 'M' */
#endif
/* Alternativ core deduction for older ICCARM's */
#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \
!defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__)
#if defined(__ARM6M__) && (__CORE__ == __ARM6M__)
#define __ARM_ARCH_6M__ 1
#elif defined(__ARM7M__) && (__CORE__ == __ARM7M__)
#define __ARM_ARCH_7M__ 1
#elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__)
#define __ARM_ARCH_7EM__ 1
#elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__)
#define __ARM_ARCH_8M_BASE__ 1
#elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__)
#define __ARM_ARCH_8M_MAIN__ 1
#elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__)
#define __ARM_ARCH_8M_MAIN__ 1
#else
#error "Unknown target."
#endif
#endif
#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1
#define __IAR_M0_FAMILY 1
#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1
#define __IAR_M0_FAMILY 1
#else
#define __IAR_M0_FAMILY 0
#endif
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __NO_RETURN
#if __ICCARM_V8
#define __NO_RETURN __attribute__((__noreturn__))
#else
#define __NO_RETURN _Pragma("object_attribute=__noreturn")
#endif
#endif
#ifndef __PACKED
#if __ICCARM_V8
#define __PACKED __attribute__((packed, aligned(1)))
#else
/* Needs IAR language extensions */
#define __PACKED __packed
#endif
#endif
#ifndef __PACKED_STRUCT
#if __ICCARM_V8
#define __PACKED_STRUCT struct __attribute__((packed, aligned(1)))
#else
/* Needs IAR language extensions */
#define __PACKED_STRUCT __packed struct
#endif
#endif
#ifndef __PACKED_UNION
#if __ICCARM_V8
#define __PACKED_UNION union __attribute__((packed, aligned(1)))
#else
/* Needs IAR language extensions */
#define __PACKED_UNION __packed union
#endif
#endif
#ifndef __RESTRICT
#define __RESTRICT __restrict
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#ifndef __FORCEINLINE
#define __FORCEINLINE _Pragma("inline=forced")
#endif
#ifndef __STATIC_FORCEINLINE
#define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE
#endif
#ifndef __UNALIGNED_UINT16_READ
#pragma language=save
#pragma language=extended
__IAR_FT uint16_t __iar_uint16_read(void const *ptr)
{
return *(__packed uint16_t*)(ptr);
}
#pragma language=restore
#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR)
#endif
#ifndef __UNALIGNED_UINT16_WRITE
#pragma language=save
#pragma language=extended
__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val)
{
*(__packed uint16_t*)(ptr) = val;;
}
#pragma language=restore
#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL)
#endif
#ifndef __UNALIGNED_UINT32_READ
#pragma language=save
#pragma language=extended
__IAR_FT uint32_t __iar_uint32_read(void const *ptr)
{
return *(__packed uint32_t*)(ptr);
}
#pragma language=restore
#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR)
#endif
#ifndef __UNALIGNED_UINT32_WRITE
#pragma language=save
#pragma language=extended
__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val)
{
*(__packed uint32_t*)(ptr) = val;;
}
#pragma language=restore
#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL)
#endif
#ifndef __UNALIGNED_UINT32 /* deprecated */
#pragma language=save
#pragma language=extended
__packed struct __iar_u32 { uint32_t v; };
#pragma language=restore
#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v)
#endif
#ifndef __USED
#if __ICCARM_V8
#define __USED __attribute__((used))
#else
#define __USED _Pragma("__root")
#endif
#endif
#ifndef __WEAK
#if __ICCARM_V8
#define __WEAK __attribute__((weak))
#else
#define __WEAK _Pragma("__weak")
#endif
#endif
#ifndef __ICCARM_INTRINSICS_VERSION__
#define __ICCARM_INTRINSICS_VERSION__ 0
#endif
#if __ICCARM_INTRINSICS_VERSION__ == 2
#if defined(__CLZ)
#undef __CLZ
#endif
#if defined(__REVSH)
#undef __REVSH
#endif
#if defined(__RBIT)
#undef __RBIT
#endif
#if defined(__SSAT)
#undef __SSAT
#endif
#if defined(__USAT)
#undef __USAT
#endif
#include "iccarm_builtin.h"
#define __disable_fault_irq __iar_builtin_disable_fiq
#define __disable_irq __iar_builtin_disable_interrupt
#define __enable_fault_irq __iar_builtin_enable_fiq
#define __enable_irq __iar_builtin_enable_interrupt
#define __arm_rsr __iar_builtin_rsr
#define __arm_wsr __iar_builtin_wsr
#define __get_APSR() (__arm_rsr("APSR"))
#define __get_BASEPRI() (__arm_rsr("BASEPRI"))
#define __get_CONTROL() (__arm_rsr("CONTROL"))
#define __get_FAULTMASK() (__arm_rsr("FAULTMASK"))
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
#define __get_FPSCR() (__arm_rsr("FPSCR"))
#define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE)))
#else
#define __get_FPSCR() ( 0 )
#define __set_FPSCR(VALUE) ((void)VALUE)
#endif
#define __get_IPSR() (__arm_rsr("IPSR"))
#define __get_MSP() (__arm_rsr("MSP"))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure MSPLIM is RAZ/WI
#define __get_MSPLIM() (0U)
#else
#define __get_MSPLIM() (__arm_rsr("MSPLIM"))
#endif
#define __get_PRIMASK() (__arm_rsr("PRIMASK"))
#define __get_PSP() (__arm_rsr("PSP"))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
#define __get_PSPLIM() (0U)
#else
#define __get_PSPLIM() (__arm_rsr("PSPLIM"))
#endif
#define __get_xPSR() (__arm_rsr("xPSR"))
#define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE)))
#define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE)))
#define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE)))
#define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE)))
#define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE)))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure MSPLIM is RAZ/WI
#define __set_MSPLIM(VALUE) ((void)(VALUE))
#else
#define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE)))
#endif
#define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE)))
#define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE)))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
#define __set_PSPLIM(VALUE) ((void)(VALUE))
#else
#define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE)))
#endif
#define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS"))
#define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE)))
#define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS"))
#define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE)))
#define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS"))
#define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE)))
#define __TZ_get_SP_NS() (__arm_rsr("SP_NS"))
#define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE)))
#define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS"))
#define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE)))
#define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS"))
#define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE)))
#define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS"))
#define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE)))
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
#define __TZ_get_PSPLIM_NS() (0U)
#define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE))
#else
#define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS"))
#define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE)))
#endif
#define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS"))
#define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE)))
#define __NOP __iar_builtin_no_operation
#define __CLZ __iar_builtin_CLZ
#define __CLREX __iar_builtin_CLREX
#define __DMB __iar_builtin_DMB
#define __DSB __iar_builtin_DSB
#define __ISB __iar_builtin_ISB
#define __LDREXB __iar_builtin_LDREXB
#define __LDREXH __iar_builtin_LDREXH
#define __LDREXW __iar_builtin_LDREX
#define __RBIT __iar_builtin_RBIT
#define __REV __iar_builtin_REV
#define __REV16 __iar_builtin_REV16
__IAR_FT int16_t __REVSH(int16_t val)
{
return (int16_t) __iar_builtin_REVSH(val);
}
#define __ROR __iar_builtin_ROR
#define __RRX __iar_builtin_RRX
#define __SEV __iar_builtin_SEV
#if !__IAR_M0_FAMILY
#define __SSAT __iar_builtin_SSAT
#endif
#define __STREXB __iar_builtin_STREXB
#define __STREXH __iar_builtin_STREXH
#define __STREXW __iar_builtin_STREX
#if !__IAR_M0_FAMILY
#define __USAT __iar_builtin_USAT
#endif
#define __WFE __iar_builtin_WFE
#define __WFI __iar_builtin_WFI
#if __ARM_MEDIA__
#define __SADD8 __iar_builtin_SADD8
#define __QADD8 __iar_builtin_QADD8
#define __SHADD8 __iar_builtin_SHADD8
#define __UADD8 __iar_builtin_UADD8
#define __UQADD8 __iar_builtin_UQADD8
#define __UHADD8 __iar_builtin_UHADD8
#define __SSUB8 __iar_builtin_SSUB8
#define __QSUB8 __iar_builtin_QSUB8
#define __SHSUB8 __iar_builtin_SHSUB8
#define __USUB8 __iar_builtin_USUB8
#define __UQSUB8 __iar_builtin_UQSUB8
#define __UHSUB8 __iar_builtin_UHSUB8
#define __SADD16 __iar_builtin_SADD16
#define __QADD16 __iar_builtin_QADD16
#define __SHADD16 __iar_builtin_SHADD16
#define __UADD16 __iar_builtin_UADD16
#define __UQADD16 __iar_builtin_UQADD16
#define __UHADD16 __iar_builtin_UHADD16
#define __SSUB16 __iar_builtin_SSUB16
#define __QSUB16 __iar_builtin_QSUB16
#define __SHSUB16 __iar_builtin_SHSUB16
#define __USUB16 __iar_builtin_USUB16
#define __UQSUB16 __iar_builtin_UQSUB16
#define __UHSUB16 __iar_builtin_UHSUB16
#define __SASX __iar_builtin_SASX
#define __QASX __iar_builtin_QASX
#define __SHASX __iar_builtin_SHASX
#define __UASX __iar_builtin_UASX
#define __UQASX __iar_builtin_UQASX
#define __UHASX __iar_builtin_UHASX
#define __SSAX __iar_builtin_SSAX
#define __QSAX __iar_builtin_QSAX
#define __SHSAX __iar_builtin_SHSAX
#define __USAX __iar_builtin_USAX
#define __UQSAX __iar_builtin_UQSAX
#define __UHSAX __iar_builtin_UHSAX
#define __USAD8 __iar_builtin_USAD8
#define __USADA8 __iar_builtin_USADA8
#define __SSAT16 __iar_builtin_SSAT16
#define __USAT16 __iar_builtin_USAT16
#define __UXTB16 __iar_builtin_UXTB16
#define __UXTAB16 __iar_builtin_UXTAB16
#define __SXTB16 __iar_builtin_SXTB16
#define __SXTAB16 __iar_builtin_SXTAB16
#define __SMUAD __iar_builtin_SMUAD
#define __SMUADX __iar_builtin_SMUADX
#define __SMMLA __iar_builtin_SMMLA
#define __SMLAD __iar_builtin_SMLAD
#define __SMLADX __iar_builtin_SMLADX
#define __SMLALD __iar_builtin_SMLALD
#define __SMLALDX __iar_builtin_SMLALDX
#define __SMUSD __iar_builtin_SMUSD
#define __SMUSDX __iar_builtin_SMUSDX
#define __SMLSD __iar_builtin_SMLSD
#define __SMLSDX __iar_builtin_SMLSDX
#define __SMLSLD __iar_builtin_SMLSLD
#define __SMLSLDX __iar_builtin_SMLSLDX
#define __SEL __iar_builtin_SEL
#define __QADD __iar_builtin_QADD
#define __QSUB __iar_builtin_QSUB
#define __PKHBT __iar_builtin_PKHBT
#define __PKHTB __iar_builtin_PKHTB
#endif
#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */
#if __IAR_M0_FAMILY
/* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
#define __CLZ __cmsis_iar_clz_not_active
#define __SSAT __cmsis_iar_ssat_not_active
#define __USAT __cmsis_iar_usat_not_active
#define __RBIT __cmsis_iar_rbit_not_active
#define __get_APSR __cmsis_iar_get_APSR_not_active
#endif
#if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) ))
#define __get_FPSCR __cmsis_iar_get_FPSR_not_active
#define __set_FPSCR __cmsis_iar_set_FPSR_not_active
#endif
#ifdef __INTRINSICS_INCLUDED
#error intrinsics.h is already included previously!
#endif
#include <intrinsics.h>
#if __IAR_M0_FAMILY
/* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */
#undef __CLZ
#undef __SSAT
#undef __USAT
#undef __RBIT
#undef __get_APSR
__STATIC_INLINE uint8_t __CLZ(uint32_t data)
{
if (data == 0U) { return 32U; }
uint32_t count = 0U;
uint32_t mask = 0x80000000U;
while ((data & mask) == 0U)
{
count += 1U;
mask = mask >> 1U;
}
return count;
}
__STATIC_INLINE uint32_t __RBIT(uint32_t v)
{
uint8_t sc = 31U;
uint32_t r = v;
for (v >>= 1U; v; v >>= 1U)
{
r <<= 1U;
r |= v & 1U;
sc--;
}
return (r << sc);
}
__STATIC_INLINE uint32_t __get_APSR(void)
{
uint32_t res;
__asm("MRS %0,APSR" : "=r" (res));
return res;
}
#endif
#if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
(defined (__FPU_USED ) && (__FPU_USED == 1U)) ))
#undef __get_FPSCR
#undef __set_FPSCR
#define __get_FPSCR() (0)
#define __set_FPSCR(VALUE) ((void)VALUE)
#endif
#pragma diag_suppress=Pe940
#pragma diag_suppress=Pe177
#define __enable_irq __enable_interrupt
#define __disable_irq __disable_interrupt
#define __NOP __no_operation
#define __get_xPSR __get_PSR
#if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0)
__IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr)
{
return __LDREX((unsigned long *)ptr);
}
__IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr)
{
return __STREX(value, (unsigned long *)ptr);
}
#endif
/* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
#if (__CORTEX_M >= 0x03)
__IAR_FT uint32_t __RRX(uint32_t value)
{
uint32_t result;
__ASM("RRX %0, %1" : "=r"(result) : "r" (value) : "cc");
return(result);
}
__IAR_FT void __set_BASEPRI_MAX(uint32_t value)
{
__asm volatile("MSR BASEPRI_MAX,%0"::"r" (value));
}
#define __enable_fault_irq __enable_fiq
#define __disable_fault_irq __disable_fiq
#endif /* (__CORTEX_M >= 0x03) */
__IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2)
{
return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2));
}
#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
(defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) )
__IAR_FT uint32_t __get_MSPLIM(void)
{
uint32_t res;
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure MSPLIM is RAZ/WI
res = 0U;
#else
__asm volatile("MRS %0,MSPLIM" : "=r" (res));
#endif
return res;
}
__IAR_FT void __set_MSPLIM(uint32_t value)
{
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure MSPLIM is RAZ/WI
(void)value;
#else
__asm volatile("MSR MSPLIM,%0" :: "r" (value));
#endif
}
__IAR_FT uint32_t __get_PSPLIM(void)
{
uint32_t res;
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
res = 0U;
#else
__asm volatile("MRS %0,PSPLIM" : "=r" (res));
#endif
return res;
}
__IAR_FT void __set_PSPLIM(uint32_t value)
{
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
(void)value;
#else
__asm volatile("MSR PSPLIM,%0" :: "r" (value));
#endif
}
__IAR_FT uint32_t __TZ_get_CONTROL_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,CONTROL_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_CONTROL_NS(uint32_t value)
{
__asm volatile("MSR CONTROL_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_PSP_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,PSP_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_PSP_NS(uint32_t value)
{
__asm volatile("MSR PSP_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_MSP_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,MSP_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_MSP_NS(uint32_t value)
{
__asm volatile("MSR MSP_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_SP_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,SP_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_SP_NS(uint32_t value)
{
__asm volatile("MSR SP_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_PRIMASK_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,PRIMASK_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value)
{
__asm volatile("MSR PRIMASK_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_BASEPRI_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,BASEPRI_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value)
{
__asm volatile("MSR BASEPRI_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value)
{
__asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value));
}
__IAR_FT uint32_t __TZ_get_PSPLIM_NS(void)
{
uint32_t res;
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
res = 0U;
#else
__asm volatile("MRS %0,PSPLIM_NS" : "=r" (res));
#endif
return res;
}
__IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value)
{
#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \
(!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3)))
// without main extensions, the non-secure PSPLIM is RAZ/WI
(void)value;
#else
__asm volatile("MSR PSPLIM_NS,%0" :: "r" (value));
#endif
}
__IAR_FT uint32_t __TZ_get_MSPLIM_NS(void)
{
uint32_t res;
__asm volatile("MRS %0,MSPLIM_NS" : "=r" (res));
return res;
}
__IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value)
{
__asm volatile("MSR MSPLIM_NS,%0" :: "r" (value));
}
#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */
#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value))
#if __IAR_M0_FAMILY
__STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
{
if ((sat >= 1U) && (sat <= 32U))
{
const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
const int32_t min = -1 - max ;
if (val > max)
{
return max;
}
else if (val < min)
{
return min;
}
}
return val;
}
__STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
{
if (sat <= 31U)
{
const uint32_t max = ((1U << sat) - 1U);
if (val > (int32_t)max)
{
return max;
}
else if (val < 0)
{
return 0U;
}
}
return (uint32_t)val;
}
#endif
#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */
__IAR_FT uint8_t __LDRBT(volatile uint8_t *addr)
{
uint32_t res;
__ASM("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
return ((uint8_t)res);
}
__IAR_FT uint16_t __LDRHT(volatile uint16_t *addr)
{
uint32_t res;
__ASM("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
return ((uint16_t)res);
}
__IAR_FT uint32_t __LDRT(volatile uint32_t *addr)
{
uint32_t res;
__ASM("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory");
return res;
}
__IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr)
{
__ASM("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
}
__IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr)
{
__ASM("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory");
}
__IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr)
{
__ASM("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory");
}
#endif /* (__CORTEX_M >= 0x03) */
#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \
(defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) )
__IAR_FT uint8_t __LDAB(volatile uint8_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return ((uint8_t)res);
}
__IAR_FT uint16_t __LDAH(volatile uint16_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return ((uint16_t)res);
}
__IAR_FT uint32_t __LDA(volatile uint32_t *ptr)
{
uint32_t res;
__ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return res;
}
__IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr)
{
__ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
}
__IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr)
{
__ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
}
__IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr)
{
__ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory");
}
__IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return ((uint8_t)res);
}
__IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return ((uint16_t)res);
}
__IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr)
{
uint32_t res;
__ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory");
return res;
}
__IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr)
{
uint32_t res;
__ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
return res;
}
__IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr)
{
uint32_t res;
__ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
return res;
}
__IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr)
{
uint32_t res;
__ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory");
return res;
}
#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */
#undef __IAR_FT
#undef __IAR_M0_FAMILY
#undef __ICCARM_V8
#pragma diag_default=Pe940
#pragma diag_default=Pe177
#endif /* __CMSIS_ICCARM_H__ */

39
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/cmsis_version.h Normal file
View file

@ -0,0 +1,39 @@
/**************************************************************************//**
* @file cmsis_version.h
* @brief CMSIS Core(M) Version definitions
* @version V5.0.2
* @date 19. April 2017
******************************************************************************/
/*
* Copyright (c) 2009-2017 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CMSIS_VERSION_H
#define __CMSIS_VERSION_H
/* CMSIS Version definitions */
#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */
#define __CM_CMSIS_VERSION_SUB ( 1U) /*!< [15:0] CMSIS Core(M) sub version */
#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \
__CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */
#endif

1918
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/core_armv8mbl.h Normal file
View file

File diff suppressed because it is too large Load diff

2927
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/core_armv8mml.h Normal file
View file

File diff suppressed because it is too large Load diff

949
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/core_cm0.h Normal file
View file

@ -0,0 +1,949 @@
/**************************************************************************//**
* @file core_cm0.h
* @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
* @version V5.0.5
* @date 28. May 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CORE_CM0_H_GENERIC
#define __CORE_CM0_H_GENERIC
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
CMSIS violates the following MISRA-C:2004 rules:
\li Required Rule 8.5, object/function definition in header file.<br>
Function definitions in header files are used to allow 'inlining'.
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
Unions are used for effective representation of core registers.
\li Advisory Rule 19.7, Function-like macro defined.<br>
Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
/**
\ingroup Cortex_M0
@{
*/
#include "cmsis_version.h"
/* CMSIS CM0 definitions */
#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */
#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */
#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
__CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */
#define __CORTEX_M (0U) /*!< Cortex-M Core */
/** __FPU_USED indicates whether an FPU is used or not.
This core does not support an FPU at all
*/
#define __FPU_USED 0U
#if defined ( __CC_ARM )
#if defined __TARGET_FPU_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#if defined __ARM_PCS_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __GNUC__ )
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __ICCARM__ )
#if defined __ARMVFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TI_ARM__ )
#if defined __TI_VFP_SUPPORT__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TASKING__ )
#if defined __FPU_VFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __CSMC__ )
#if ( __CSMC__ & 0x400U)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#endif
#include "cmsis_compiler.h" /* CMSIS compiler specific defines */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM0_H_GENERIC */
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM0_H_DEPENDANT
#define __CORE_CM0_H_DEPENDANT
#ifdef __cplusplus
extern "C" {
#endif
/* check device defines and use defaults */
#if defined __CHECK_DEVICE_DEFINES
#ifndef __CM0_REV
#define __CM0_REV 0x0000U
#warning "__CM0_REV not defined in device header file; using default!"
#endif
#ifndef __NVIC_PRIO_BITS
#define __NVIC_PRIO_BITS 2U
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
#endif
#ifndef __Vendor_SysTickConfig
#define __Vendor_SysTickConfig 0U
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
#endif
#endif
/* IO definitions (access restrictions to peripheral registers) */
/**
\defgroup CMSIS_glob_defs CMSIS Global Defines
<strong>IO Type Qualifiers</strong> are used
\li to specify the access to peripheral variables.
\li for automatic generation of peripheral register debug information.
*/
#ifdef __cplusplus
#define __I volatile /*!< Defines 'read only' permissions */
#else
#define __I volatile const /*!< Defines 'read only' permissions */
#endif
#define __O volatile /*!< Defines 'write only' permissions */
#define __IO volatile /*!< Defines 'read / write' permissions */
/* following defines should be used for structure members */
#define __IM volatile const /*! Defines 'read only' structure member permissions */
#define __OM volatile /*! Defines 'write only' structure member permissions */
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
/*@} end of group Cortex_M0 */
/*******************************************************************************
* Register Abstraction
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
******************************************************************************/
/**
\defgroup CMSIS_core_register Defines and Type Definitions
\brief Type definitions and defines for Cortex-M processor based devices.
*/
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CORE Status and Control Registers
\brief Core Register type definitions.
@{
*/
/**
\brief Union type to access the Application Program Status Register (APSR).
*/
typedef union
{
struct
{
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} APSR_Type;
/* APSR Register Definitions */
#define APSR_N_Pos 31U /*!< APSR: N Position */
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
#define APSR_C_Pos 29U /*!< APSR: C Position */
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
#define APSR_V_Pos 28U /*!< APSR: V Position */
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
/**
\brief Union type to access the Interrupt Program Status Register (IPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} IPSR_Type;
/* IPSR Register Definitions */
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
/**
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} xPSR_Type;
/* xPSR Register Definitions */
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
/**
\brief Union type to access the Control Registers (CONTROL).
*/
typedef union
{
struct
{
uint32_t _reserved0:1; /*!< bit: 0 Reserved */
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} CONTROL_Type;
/* CONTROL Register Definitions */
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
/*@} end of group CMSIS_CORE */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
\brief Type definitions for the NVIC Registers
@{
*/
/**
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
*/
typedef struct
{
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
uint32_t RESERVED0[31U];
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
uint32_t RSERVED1[31U];
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
uint32_t RESERVED2[31U];
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31U];
uint32_t RESERVED4[64U];
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCB System Control Block (SCB)
\brief Type definitions for the System Control Block Registers
@{
*/
/**
\brief Structure type to access the System Control Block (SCB).
*/
typedef struct
{
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
uint32_t RESERVED0;
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
uint32_t RESERVED1;
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
/* SCB Interrupt Control State Register Definitions */
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
/* SCB Application Interrupt and Reset Control Register Definitions */
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
/* SCB System Control Register Definitions */
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
/* SCB Configuration Control Register Definitions */
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
/* SCB System Handler Control and State Register Definitions */
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
/*@} end of group CMSIS_SCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
\brief Type definitions for the System Timer Registers.
@{
*/
/**
\brief Structure type to access the System Timer (SysTick).
*/
typedef struct
{
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
} SysTick_Type;
/* SysTick Control / Status Register Definitions */
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
/* SysTick Reload Register Definitions */
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
/* SysTick Current Register Definitions */
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
/* SysTick Calibration Register Definitions */
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
/*@} end of group CMSIS_SysTick */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
\brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
Therefore they are not covered by the Cortex-M0 header file.
@{
*/
/*@} end of group CMSIS_CoreDebug */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_bitfield Core register bit field macros
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
@{
*/
/**
\brief Mask and shift a bit field value for use in a register bit range.
\param[in] field Name of the register bit field.
\param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type.
\return Masked and shifted value.
*/
#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
/**
\brief Mask and shift a register value to extract a bit filed value.
\param[in] field Name of the register bit field.
\param[in] value Value of register. This parameter is interpreted as an uint32_t type.
\return Masked and shifted bit field value.
*/
#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
/*@} end of group CMSIS_core_bitfield */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_base Core Definitions
\brief Definitions for base addresses, unions, and structures.
@{
*/
/* Memory mapping of Core Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
/*@} */
/*******************************************************************************
* Hardware Abstraction Layer
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
******************************************************************************/
/**
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
\brief Functions that manage interrupts and exceptions via the NVIC.
@{
*/
#ifdef CMSIS_NVIC_VIRTUAL
#ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
#define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
#endif
#include CMSIS_NVIC_VIRTUAL_HEADER_FILE
#else
#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping
#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping
#define NVIC_EnableIRQ __NVIC_EnableIRQ
#define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ
#define NVIC_DisableIRQ __NVIC_DisableIRQ
#define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
#define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
#define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */
#define NVIC_SetPriority __NVIC_SetPriority
#define NVIC_GetPriority __NVIC_GetPriority
#define NVIC_SystemReset __NVIC_SystemReset
#endif /* CMSIS_NVIC_VIRTUAL */
#ifdef CMSIS_VECTAB_VIRTUAL
#ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
#define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
#endif
#include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
#else
#define NVIC_SetVector __NVIC_SetVector
#define NVIC_GetVector __NVIC_GetVector
#endif /* (CMSIS_VECTAB_VIRTUAL) */
#define NVIC_USER_IRQ_OFFSET 16
/* The following EXC_RETURN values are saved the LR on exception entry */
#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */
#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */
#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */
/* Interrupt Priorities are WORD accessible only under Armv6-M */
/* The following MACROS handle generation of the register offset and byte masks */
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
#define __NVIC_SetPriorityGrouping(X) (void)(X)
#define __NVIC_GetPriorityGrouping() (0U)
/**
\brief Enable Interrupt
\details Enables a device specific interrupt in the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Get Interrupt Enable status
\details Returns a device specific interrupt enable status from the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\return 0 Interrupt is not enabled.
\return 1 Interrupt is enabled.
\note IRQn must not be negative.
*/
__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
else
{
return(0U);
}
}
/**
\brief Disable Interrupt
\details Disables a device specific interrupt in the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
__DSB();
__ISB();
}
}
/**
\brief Get Pending Interrupt
\details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
\param [in] IRQn Device specific interrupt number.
\return 0 Interrupt status is not pending.
\return 1 Interrupt status is pending.
\note IRQn must not be negative.
*/
__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
else
{
return(0U);
}
}
/**
\brief Set Pending Interrupt
\details Sets the pending bit of a device specific interrupt in the NVIC pending register.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Clear Pending Interrupt
\details Clears the pending bit of a device specific interrupt in the NVIC pending register.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Set Interrupt Priority
\details Sets the priority of a device specific interrupt or a processor exception.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\param [in] priority Priority to set.
\note The priority cannot be set for every processor exception.
*/
__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
else
{
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
}
/**
\brief Get Interrupt Priority
\details Reads the priority of a device specific interrupt or a processor exception.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\return Interrupt Priority.
Value is aligned automatically to the implemented priority bits of the microcontroller.
*/
__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
else
{
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
}
/**
\brief Encode Priority
\details Encodes the priority for an interrupt with the given priority group,
preemptive priority value, and subpriority value.
In case of a conflict between priority grouping and available
priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
\param [in] PriorityGroup Used priority group.
\param [in] PreemptPriority Preemptive priority value (starting from 0).
\param [in] SubPriority Subpriority value (starting from 0).
\return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
*/
__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
return (
((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
);
}
/**
\brief Decode Priority
\details Decodes an interrupt priority value with a given priority group to
preemptive priority value and subpriority value.
In case of a conflict between priority grouping and available
priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
\param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
\param [in] PriorityGroup Used priority group.
\param [out] pPreemptPriority Preemptive priority value (starting from 0).
\param [out] pSubPriority Subpriority value (starting from 0).
*/
__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
*pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
*pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
}
/**
\brief Set Interrupt Vector
\details Sets an interrupt vector in SRAM based interrupt vector table.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
Address 0 must be mapped to SRAM.
\param [in] IRQn Interrupt number
\param [in] vector Address of interrupt handler function
*/
__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
{
uint32_t *vectors = (uint32_t *)0x0U;
vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
}
/**
\brief Get Interrupt Vector
\details Reads an interrupt vector from interrupt vector table.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\return Address of interrupt handler function
*/
__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
{
uint32_t *vectors = (uint32_t *)0x0U;
return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
}
/**
\brief System Reset
\details Initiates a system reset request to reset the MCU.
*/
__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
buffered write are completed before reset */
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
__DSB(); /* Ensure completion of memory access */
for(;;) /* wait until reset */
{
__NOP();
}
}
/*@} end of CMSIS_Core_NVICFunctions */
/* ########################## FPU functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_FpuFunctions FPU Functions
\brief Function that provides FPU type.
@{
*/
/**
\brief get FPU type
\details returns the FPU type
\returns
- \b 0: No FPU
- \b 1: Single precision FPU
- \b 2: Double + Single precision FPU
*/
__STATIC_INLINE uint32_t SCB_GetFPUType(void)
{
return 0U; /* No FPU */
}
/*@} end of CMSIS_Core_FpuFunctions */
/* ################################## SysTick function ############################################ */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
\brief Functions that configure the System.
@{
*/
#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
/**
\brief System Tick Configuration
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
Counter is in free running mode to generate periodic interrupts.
\param [in] ticks Number of ticks between two interrupts.
\return 0 Function succeeded.
\return 1 Function failed.
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
must contain a vendor-specific implementation of this function.
*/
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
{
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
{
return (1UL); /* Reload value impossible */
}
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0UL); /* Function successful */
}
#endif
/*@} end of CMSIS_Core_SysTickFunctions */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM0_H_DEPENDANT */
#endif /* __CMSIS_GENERIC */

1083
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/core_cm0plus.h Normal file
View file

File diff suppressed because it is too large Load diff

976
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/core_cm1.h Normal file
View file

@ -0,0 +1,976 @@
/**************************************************************************//**
* @file core_cm1.h
* @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File
* @version V1.0.0
* @date 23. July 2018
******************************************************************************/
/*
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CORE_CM1_H_GENERIC
#define __CORE_CM1_H_GENERIC
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
CMSIS violates the following MISRA-C:2004 rules:
\li Required Rule 8.5, object/function definition in header file.<br>
Function definitions in header files are used to allow 'inlining'.
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
Unions are used for effective representation of core registers.
\li Advisory Rule 19.7, Function-like macro defined.<br>
Function-like macros are used to allow more efficient code.
*/
/*******************************************************************************
* CMSIS definitions
******************************************************************************/
/**
\ingroup Cortex_M1
@{
*/
#include "cmsis_version.h"
/* CMSIS CM1 definitions */
#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */
#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */
#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \
__CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */
#define __CORTEX_M (1U) /*!< Cortex-M Core */
/** __FPU_USED indicates whether an FPU is used or not.
This core does not support an FPU at all
*/
#define __FPU_USED 0U
#if defined ( __CC_ARM )
#if defined __TARGET_FPU_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#if defined __ARM_PCS_VFP
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __GNUC__ )
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __ICCARM__ )
#if defined __ARMVFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TI_ARM__ )
#if defined __TI_VFP_SUPPORT__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __TASKING__ )
#if defined __FPU_VFP__
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#elif defined ( __CSMC__ )
#if ( __CSMC__ & 0x400U)
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
#endif
#endif
#include "cmsis_compiler.h" /* CMSIS compiler specific defines */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM1_H_GENERIC */
#ifndef __CMSIS_GENERIC
#ifndef __CORE_CM1_H_DEPENDANT
#define __CORE_CM1_H_DEPENDANT
#ifdef __cplusplus
extern "C" {
#endif
/* check device defines and use defaults */
#if defined __CHECK_DEVICE_DEFINES
#ifndef __CM1_REV
#define __CM1_REV 0x0100U
#warning "__CM1_REV not defined in device header file; using default!"
#endif
#ifndef __NVIC_PRIO_BITS
#define __NVIC_PRIO_BITS 2U
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
#endif
#ifndef __Vendor_SysTickConfig
#define __Vendor_SysTickConfig 0U
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
#endif
#endif
/* IO definitions (access restrictions to peripheral registers) */
/**
\defgroup CMSIS_glob_defs CMSIS Global Defines
<strong>IO Type Qualifiers</strong> are used
\li to specify the access to peripheral variables.
\li for automatic generation of peripheral register debug information.
*/
#ifdef __cplusplus
#define __I volatile /*!< Defines 'read only' permissions */
#else
#define __I volatile const /*!< Defines 'read only' permissions */
#endif
#define __O volatile /*!< Defines 'write only' permissions */
#define __IO volatile /*!< Defines 'read / write' permissions */
/* following defines should be used for structure members */
#define __IM volatile const /*! Defines 'read only' structure member permissions */
#define __OM volatile /*! Defines 'write only' structure member permissions */
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
/*@} end of group Cortex_M1 */
/*******************************************************************************
* Register Abstraction
Core Register contain:
- Core Register
- Core NVIC Register
- Core SCB Register
- Core SysTick Register
******************************************************************************/
/**
\defgroup CMSIS_core_register Defines and Type Definitions
\brief Type definitions and defines for Cortex-M processor based devices.
*/
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CORE Status and Control Registers
\brief Core Register type definitions.
@{
*/
/**
\brief Union type to access the Application Program Status Register (APSR).
*/
typedef union
{
struct
{
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} APSR_Type;
/* APSR Register Definitions */
#define APSR_N_Pos 31U /*!< APSR: N Position */
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
#define APSR_C_Pos 29U /*!< APSR: C Position */
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
#define APSR_V_Pos 28U /*!< APSR: V Position */
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
/**
\brief Union type to access the Interrupt Program Status Register (IPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} IPSR_Type;
/* IPSR Register Definitions */
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
/**
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
*/
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} xPSR_Type;
/* xPSR Register Definitions */
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
/**
\brief Union type to access the Control Registers (CONTROL).
*/
typedef union
{
struct
{
uint32_t _reserved0:1; /*!< bit: 0 Reserved */
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
} b; /*!< Structure used for bit access */
uint32_t w; /*!< Type used for word access */
} CONTROL_Type;
/* CONTROL Register Definitions */
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
/*@} end of group CMSIS_CORE */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
\brief Type definitions for the NVIC Registers
@{
*/
/**
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
*/
typedef struct
{
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
uint32_t RESERVED0[31U];
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
uint32_t RSERVED1[31U];
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
uint32_t RESERVED2[31U];
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
uint32_t RESERVED3[31U];
uint32_t RESERVED4[64U];
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
} NVIC_Type;
/*@} end of group CMSIS_NVIC */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCB System Control Block (SCB)
\brief Type definitions for the System Control Block Registers
@{
*/
/**
\brief Structure type to access the System Control Block (SCB).
*/
typedef struct
{
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
uint32_t RESERVED0;
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
uint32_t RESERVED1;
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
/* SCB Interrupt Control State Register Definitions */
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
/* SCB Application Interrupt and Reset Control Register Definitions */
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
/* SCB System Control Register Definitions */
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
/* SCB Configuration Control Register Definitions */
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
/* SCB System Handler Control and State Register Definitions */
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
/*@} end of group CMSIS_SCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
\brief Type definitions for the System Control and ID Register not in the SCB
@{
*/
/**
\brief Structure type to access the System Control and ID Register not in the SCB.
*/
typedef struct
{
uint32_t RESERVED0[2U];
__IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
} SCnSCB_Type;
/* Auxiliary Control Register Definitions */
#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */
#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */
#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */
#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */
/*@} end of group CMSIS_SCnotSCB */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
\brief Type definitions for the System Timer Registers.
@{
*/
/**
\brief Structure type to access the System Timer (SysTick).
*/
typedef struct
{
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
} SysTick_Type;
/* SysTick Control / Status Register Definitions */
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
/* SysTick Reload Register Definitions */
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
/* SysTick Current Register Definitions */
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
/* SysTick Calibration Register Definitions */
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
/*@} end of group CMSIS_SysTick */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
\brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
Therefore they are not covered by the Cortex-M1 header file.
@{
*/
/*@} end of group CMSIS_CoreDebug */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_bitfield Core register bit field macros
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
@{
*/
/**
\brief Mask and shift a bit field value for use in a register bit range.
\param[in] field Name of the register bit field.
\param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type.
\return Masked and shifted value.
*/
#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
/**
\brief Mask and shift a register value to extract a bit filed value.
\param[in] field Name of the register bit field.
\param[in] value Value of register. This parameter is interpreted as an uint32_t type.
\return Masked and shifted bit field value.
*/
#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
/*@} end of group CMSIS_core_bitfield */
/**
\ingroup CMSIS_core_register
\defgroup CMSIS_core_base Core Definitions
\brief Definitions for base addresses, unions, and structures.
@{
*/
/* Memory mapping of Core Hardware */
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
/*@} */
/*******************************************************************************
* Hardware Abstraction Layer
Core Function Interface contains:
- Core NVIC Functions
- Core SysTick Functions
- Core Register Access Functions
******************************************************************************/
/**
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
*/
/* ########################## NVIC functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
\brief Functions that manage interrupts and exceptions via the NVIC.
@{
*/
#ifdef CMSIS_NVIC_VIRTUAL
#ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
#define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
#endif
#include CMSIS_NVIC_VIRTUAL_HEADER_FILE
#else
#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping
#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping
#define NVIC_EnableIRQ __NVIC_EnableIRQ
#define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ
#define NVIC_DisableIRQ __NVIC_DisableIRQ
#define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
#define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
#define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */
#define NVIC_SetPriority __NVIC_SetPriority
#define NVIC_GetPriority __NVIC_GetPriority
#define NVIC_SystemReset __NVIC_SystemReset
#endif /* CMSIS_NVIC_VIRTUAL */
#ifdef CMSIS_VECTAB_VIRTUAL
#ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
#define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
#endif
#include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
#else
#define NVIC_SetVector __NVIC_SetVector
#define NVIC_GetVector __NVIC_GetVector
#endif /* (CMSIS_VECTAB_VIRTUAL) */
#define NVIC_USER_IRQ_OFFSET 16
/* The following EXC_RETURN values are saved the LR on exception entry */
#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */
#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */
#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */
/* Interrupt Priorities are WORD accessible only under Armv6-M */
/* The following MACROS handle generation of the register offset and byte masks */
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
#define __NVIC_SetPriorityGrouping(X) (void)(X)
#define __NVIC_GetPriorityGrouping() (0U)
/**
\brief Enable Interrupt
\details Enables a device specific interrupt in the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Get Interrupt Enable status
\details Returns a device specific interrupt enable status from the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\return 0 Interrupt is not enabled.
\return 1 Interrupt is enabled.
\note IRQn must not be negative.
*/
__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
else
{
return(0U);
}
}
/**
\brief Disable Interrupt
\details Disables a device specific interrupt in the NVIC interrupt controller.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
__DSB();
__ISB();
}
}
/**
\brief Get Pending Interrupt
\details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
\param [in] IRQn Device specific interrupt number.
\return 0 Interrupt status is not pending.
\return 1 Interrupt status is pending.
\note IRQn must not be negative.
*/
__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
}
else
{
return(0U);
}
}
/**
\brief Set Pending Interrupt
\details Sets the pending bit of a device specific interrupt in the NVIC pending register.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Clear Pending Interrupt
\details Clears the pending bit of a device specific interrupt in the NVIC pending register.
\param [in] IRQn Device specific interrupt number.
\note IRQn must not be negative.
*/
__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
}
}
/**
\brief Set Interrupt Priority
\details Sets the priority of a device specific interrupt or a processor exception.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\param [in] priority Priority to set.
\note The priority cannot be set for every processor exception.
*/
__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if ((int32_t)(IRQn) >= 0)
{
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
else
{
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
}
}
/**
\brief Get Interrupt Priority
\details Reads the priority of a device specific interrupt or a processor exception.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\return Interrupt Priority.
Value is aligned automatically to the implemented priority bits of the microcontroller.
*/
__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
{
if ((int32_t)(IRQn) >= 0)
{
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
else
{
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
}
}
/**
\brief Encode Priority
\details Encodes the priority for an interrupt with the given priority group,
preemptive priority value, and subpriority value.
In case of a conflict between priority grouping and available
priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
\param [in] PriorityGroup Used priority group.
\param [in] PreemptPriority Preemptive priority value (starting from 0).
\param [in] SubPriority Subpriority value (starting from 0).
\return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
*/
__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
return (
((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
);
}
/**
\brief Decode Priority
\details Decodes an interrupt priority value with a given priority group to
preemptive priority value and subpriority value.
In case of a conflict between priority grouping and available
priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
\param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
\param [in] PriorityGroup Used priority group.
\param [out] pPreemptPriority Preemptive priority value (starting from 0).
\param [out] pSubPriority Subpriority value (starting from 0).
*/
__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
*pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
*pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
}
/**
\brief Set Interrupt Vector
\details Sets an interrupt vector in SRAM based interrupt vector table.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
Address 0 must be mapped to SRAM.
\param [in] IRQn Interrupt number
\param [in] vector Address of interrupt handler function
*/
__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
{
uint32_t *vectors = (uint32_t *)0x0U;
vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
}
/**
\brief Get Interrupt Vector
\details Reads an interrupt vector from interrupt vector table.
The interrupt number can be positive to specify a device specific interrupt,
or negative to specify a processor exception.
\param [in] IRQn Interrupt number.
\return Address of interrupt handler function
*/
__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
{
uint32_t *vectors = (uint32_t *)0x0U;
return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
}
/**
\brief System Reset
\details Initiates a system reset request to reset the MCU.
*/
__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
buffered write are completed before reset */
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
SCB_AIRCR_SYSRESETREQ_Msk);
__DSB(); /* Ensure completion of memory access */
for(;;) /* wait until reset */
{
__NOP();
}
}
/*@} end of CMSIS_Core_NVICFunctions */
/* ########################## FPU functions #################################### */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_FpuFunctions FPU Functions
\brief Function that provides FPU type.
@{
*/
/**
\brief get FPU type
\details returns the FPU type
\returns
- \b 0: No FPU
- \b 1: Single precision FPU
- \b 2: Double + Single precision FPU
*/
__STATIC_INLINE uint32_t SCB_GetFPUType(void)
{
return 0U; /* No FPU */
}
/*@} end of CMSIS_Core_FpuFunctions */
/* ################################## SysTick function ############################################ */
/**
\ingroup CMSIS_Core_FunctionInterface
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
\brief Functions that configure the System.
@{
*/
#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
/**
\brief System Tick Configuration
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
Counter is in free running mode to generate periodic interrupts.
\param [in] ticks Number of ticks between two interrupts.
\return 0 Function succeeded.
\return 1 Function failed.
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
must contain a vendor-specific implementation of this function.
*/
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
{
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
{
return (1UL); /* Reload value impossible */
}
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0UL); /* Function successful */
}
#endif
/*@} end of CMSIS_Core_SysTickFunctions */
#ifdef __cplusplus
}
#endif
#endif /* __CORE_CM1_H_DEPENDANT */
#endif /* __CMSIS_GENERIC */

1993
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/core_cm23.h Normal file
View file

File diff suppressed because it is too large Load diff

1941
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/core_cm3.h Normal file
View file

File diff suppressed because it is too large Load diff

3002
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/core_cm33.h Normal file
View file

File diff suppressed because it is too large Load diff

2129
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/core_cm4.h Normal file
View file

File diff suppressed because it is too large Load diff

2671
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/core_cm7.h Normal file
View file

File diff suppressed because it is too large Load diff

1022
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/core_sc000.h Normal file
View file

File diff suppressed because it is too large Load diff

1915
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/core_sc300.h Normal file
View file

File diff suppressed because it is too large Load diff

270
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/mpu_armv7.h Normal file
View file

@ -0,0 +1,270 @@
/******************************************************************************
* @file mpu_armv7.h
* @brief CMSIS MPU API for Armv7-M MPU
* @version V5.0.4
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef ARM_MPU_ARMV7_H
#define ARM_MPU_ARMV7_H
#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes
#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes
#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes
#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes
#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes
#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte
#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes
#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes
#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes
#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes
#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes
#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes
#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes
#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes
#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes
#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte
#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes
#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes
#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes
#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes
#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes
#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes
#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes
#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes
#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes
#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte
#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes
#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes
#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access
#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only
#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only
#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access
#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only
#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access
/** MPU Region Base Address Register Value
*
* \param Region The region to be configured, number 0 to 15.
* \param BaseAddress The base address for the region.
*/
#define ARM_MPU_RBAR(Region, BaseAddress) \
(((BaseAddress) & MPU_RBAR_ADDR_Msk) | \
((Region) & MPU_RBAR_REGION_Msk) | \
(MPU_RBAR_VALID_Msk))
/**
* MPU Memory Access Attributes
*
* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
* \param IsShareable Region is shareable between multiple bus masters.
* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache.
* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
*/
#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \
((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \
(((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \
(((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \
(((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk))
/**
* MPU Region Attribute and Size Register Value
*
* \param DisableExec Instruction access disable bit, 1= disable instruction fetches.
* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode.
* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_.
* \param SubRegionDisable Sub-region disable field.
* \param Size Region size of the region to be configured, for example 4K, 8K.
*/
#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \
((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \
(((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \
(((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk)))
/**
* MPU Region Attribute and Size Register Value
*
* \param DisableExec Instruction access disable bit, 1= disable instruction fetches.
* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode.
* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
* \param IsShareable Region is shareable between multiple bus masters.
* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache.
* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
* \param SubRegionDisable Sub-region disable field.
* \param Size Region size of the region to be configured, for example 4K, 8K.
*/
#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \
ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size)
/**
* MPU Memory Access Attribute for strongly ordered memory.
* - TEX: 000b
* - Shareable
* - Non-cacheable
* - Non-bufferable
*/
#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U)
/**
* MPU Memory Access Attribute for device memory.
* - TEX: 000b (if non-shareable) or 010b (if shareable)
* - Shareable or non-shareable
* - Non-cacheable
* - Bufferable (if shareable) or non-bufferable (if non-shareable)
*
* \param IsShareable Configures the device memory as shareable or non-shareable.
*/
#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U))
/**
* MPU Memory Access Attribute for normal memory.
* - TEX: 1BBb (reflecting outer cacheability rules)
* - Shareable or non-shareable
* - Cacheable or non-cacheable (reflecting inner cacheability rules)
* - Bufferable or non-bufferable (reflecting inner cacheability rules)
*
* \param OuterCp Configures the outer cache policy.
* \param InnerCp Configures the inner cache policy.
* \param IsShareable Configures the memory as shareable or non-shareable.
*/
#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U))
/**
* MPU Memory Access Attribute non-cacheable policy.
*/
#define ARM_MPU_CACHEP_NOCACHE 0U
/**
* MPU Memory Access Attribute write-back, write and read allocate policy.
*/
#define ARM_MPU_CACHEP_WB_WRA 1U
/**
* MPU Memory Access Attribute write-through, no write allocate policy.
*/
#define ARM_MPU_CACHEP_WT_NWA 2U
/**
* MPU Memory Access Attribute write-back, no write allocate policy.
*/
#define ARM_MPU_CACHEP_WB_NWA 3U
/**
* Struct for a single MPU Region
*/
typedef struct {
uint32_t RBAR; //!< The region base address register value (RBAR)
uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR
} ARM_MPU_Region_t;
/** Enable the MPU.
* \param MPU_Control Default access permissions for unconfigured regions.
*/
__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
{
__DSB();
__ISB();
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
#endif
}
/** Disable the MPU.
*/
__STATIC_INLINE void ARM_MPU_Disable(void)
{
__DSB();
__ISB();
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
#endif
MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk;
}
/** Clear and disable the given MPU region.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
{
MPU->RNR = rnr;
MPU->RASR = 0U;
}
/** Configure an MPU region.
* \param rbar Value for RBAR register.
* \param rsar Value for RSAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr)
{
MPU->RBAR = rbar;
MPU->RASR = rasr;
}
/** Configure the given MPU region.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rsar Value for RSAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr)
{
MPU->RNR = rnr;
MPU->RBAR = rbar;
MPU->RASR = rasr;
}
/** Memcopy with strictly ordered memory access, e.g. for register targets.
* \param dst Destination data is copied to.
* \param src Source data is copied from.
* \param len Amount of data words to be copied.
*/
__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
{
uint32_t i;
for (i = 0U; i < len; ++i)
{
dst[i] = src[i];
}
}
/** Load the given number of MPU regions from a table.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt)
{
const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
while (cnt > MPU_TYPE_RALIASES) {
orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize);
table += MPU_TYPE_RALIASES;
cnt -= MPU_TYPE_RALIASES;
}
orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize);
}
#endif

333
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/mpu_armv8.h Normal file
View file

@ -0,0 +1,333 @@
/******************************************************************************
* @file mpu_armv8.h
* @brief CMSIS MPU API for Armv8-M MPU
* @version V5.0.4
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef ARM_MPU_ARMV8_H
#define ARM_MPU_ARMV8_H
/** \brief Attribute for device memory (outer only) */
#define ARM_MPU_ATTR_DEVICE ( 0U )
/** \brief Attribute for non-cacheable, normal memory */
#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U )
/** \brief Attribute for normal memory (outer and inner)
* \param NT Non-Transient: Set to 1 for non-transient data.
* \param WB Write-Back: Set to 1 to use write-back update policy.
* \param RA Read Allocation: Set to 1 to use cache allocation on read miss.
* \param WA Write Allocation: Set to 1 to use cache allocation on write miss.
*/
#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \
(((NT & 1U) << 3U) | ((WB & 1U) << 2U) | ((RA & 1U) << 1U) | (WA & 1U))
/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U)
/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_nGnRE (1U)
/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_nGRE (2U)
/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */
#define ARM_MPU_ATTR_DEVICE_GRE (3U)
/** \brief Memory Attribute
* \param O Outer memory attributes
* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes
*/
#define ARM_MPU_ATTR(O, I) (((O & 0xFU) << 4U) | (((O & 0xFU) != 0U) ? (I & 0xFU) : ((I & 0x3U) << 2U)))
/** \brief Normal memory non-shareable */
#define ARM_MPU_SH_NON (0U)
/** \brief Normal memory outer shareable */
#define ARM_MPU_SH_OUTER (2U)
/** \brief Normal memory inner shareable */
#define ARM_MPU_SH_INNER (3U)
/** \brief Memory access permissions
* \param RO Read-Only: Set to 1 for read-only memory.
* \param NP Non-Privileged: Set to 1 for non-privileged memory.
*/
#define ARM_MPU_AP_(RO, NP) (((RO & 1U) << 1U) | (NP & 1U))
/** \brief Region Base Address Register value
* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned.
* \param SH Defines the Shareability domain for this memory region.
* \param RO Read-Only: Set to 1 for a read-only memory region.
* \param NP Non-Privileged: Set to 1 for a non-privileged memory region.
* \oaram XN eXecute Never: Set to 1 for a non-executable memory region.
*/
#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \
((BASE & MPU_RBAR_BASE_Msk) | \
((SH << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \
((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \
((XN << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk))
/** \brief Region Limit Address Register value
* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended.
* \param IDX The attribute index to be associated with this memory region.
*/
#define ARM_MPU_RLAR(LIMIT, IDX) \
((LIMIT & MPU_RLAR_LIMIT_Msk) | \
((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \
(MPU_RLAR_EN_Msk))
/**
* Struct for a single MPU Region
*/
typedef struct {
uint32_t RBAR; /*!< Region Base Address Register value */
uint32_t RLAR; /*!< Region Limit Address Register value */
} ARM_MPU_Region_t;
/** Enable the MPU.
* \param MPU_Control Default access permissions for unconfigured regions.
*/
__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
{
__DSB();
__ISB();
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
#endif
}
/** Disable the MPU.
*/
__STATIC_INLINE void ARM_MPU_Disable(void)
{
__DSB();
__ISB();
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
#endif
MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk;
}
#ifdef MPU_NS
/** Enable the Non-secure MPU.
* \param MPU_Control Default access permissions for unconfigured regions.
*/
__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control)
{
__DSB();
__ISB();
MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
#endif
}
/** Disable the Non-secure MPU.
*/
__STATIC_INLINE void ARM_MPU_Disable_NS(void)
{
__DSB();
__ISB();
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
#endif
MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk;
}
#endif
/** Set the memory attribute encoding to the given MPU.
* \param mpu Pointer to the MPU to be configured.
* \param idx The attribute index to be set [0-7]
* \param attr The attribute value to be set.
*/
__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr)
{
const uint8_t reg = idx / 4U;
const uint32_t pos = ((idx % 4U) * 8U);
const uint32_t mask = 0xFFU << pos;
if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) {
return; // invalid index
}
mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask));
}
/** Set the memory attribute encoding.
* \param idx The attribute index to be set [0-7]
* \param attr The attribute value to be set.
*/
__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr)
{
ARM_MPU_SetMemAttrEx(MPU, idx, attr);
}
#ifdef MPU_NS
/** Set the memory attribute encoding to the Non-secure MPU.
* \param idx The attribute index to be set [0-7]
* \param attr The attribute value to be set.
*/
__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr)
{
ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr);
}
#endif
/** Clear and disable the given MPU region of the given MPU.
* \param mpu Pointer to MPU to be used.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr)
{
mpu->RNR = rnr;
mpu->RLAR = 0U;
}
/** Clear and disable the given MPU region.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
{
ARM_MPU_ClrRegionEx(MPU, rnr);
}
#ifdef MPU_NS
/** Clear and disable the given Non-secure MPU region.
* \param rnr Region number to be cleared.
*/
__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr)
{
ARM_MPU_ClrRegionEx(MPU_NS, rnr);
}
#endif
/** Configure the given MPU region of the given MPU.
* \param mpu Pointer to MPU to be used.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rlar Value for RLAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar)
{
mpu->RNR = rnr;
mpu->RBAR = rbar;
mpu->RLAR = rlar;
}
/** Configure the given MPU region.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rlar Value for RLAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar)
{
ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar);
}
#ifdef MPU_NS
/** Configure the given Non-secure MPU region.
* \param rnr Region number to be configured.
* \param rbar Value for RBAR register.
* \param rlar Value for RLAR register.
*/
__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar)
{
ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar);
}
#endif
/** Memcopy with strictly ordered memory access, e.g. for register targets.
* \param dst Destination data is copied to.
* \param src Source data is copied from.
* \param len Amount of data words to be copied.
*/
__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
{
uint32_t i;
for (i = 0U; i < len; ++i)
{
dst[i] = src[i];
}
}
/** Load the given number of MPU regions from a table to the given MPU.
* \param mpu Pointer to the MPU registers to be used.
* \param rnr First region number to be configured.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt)
{
const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
if (cnt == 1U) {
mpu->RNR = rnr;
orderedCpy(&(mpu->RBAR), &(table->RBAR), rowWordSize);
} else {
uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U);
uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES;
mpu->RNR = rnrBase;
while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) {
uint32_t c = MPU_TYPE_RALIASES - rnrOffset;
orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize);
table += c;
cnt -= c;
rnrOffset = 0U;
rnrBase += MPU_TYPE_RALIASES;
mpu->RNR = rnrBase;
}
orderedCpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize);
}
}
/** Load the given number of MPU regions from a table.
* \param rnr First region number to be configured.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt)
{
ARM_MPU_LoadEx(MPU, rnr, table, cnt);
}
#ifdef MPU_NS
/** Load the given number of MPU regions from a table to the Non-secure MPU.
* \param rnr First region number to be configured.
* \param table Pointer to the MPU configuration table.
* \param cnt Amount of regions to be configured.
*/
__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt)
{
ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt);
}
#endif
#endif

70
peripherals/cc48x6/bootloader/Drivers/CMSIS/Include/tz_context.h Normal file
View file

@ -0,0 +1,70 @@
/******************************************************************************
* @file tz_context.h
* @brief Context Management for Armv8-M TrustZone
* @version V1.0.1
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef TZ_CONTEXT_H
#define TZ_CONTEXT_H
#include <stdint.h>
#ifndef TZ_MODULEID_T
#define TZ_MODULEID_T
/// \details Data type that identifies secure software modules called by a process.
typedef uint32_t TZ_ModuleId_t;
#endif
/// \details TZ Memory ID identifies an allocated memory slot.
typedef uint32_t TZ_MemoryId_t;
/// Initialize secure context memory system
/// \return execution status (1: success, 0: error)
uint32_t TZ_InitContextSystem_S (void);
/// Allocate context memory for calling secure software modules in TrustZone
/// \param[in] module identifies software modules called from non-secure mode
/// \return value != 0 id TrustZone memory slot identifier
/// \return value 0 no memory available or internal error
TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module);
/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id);
/// Load secure context (called on RTOS thread context switch)
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_LoadContext_S (TZ_MemoryId_t id);
/// Store secure context (called on RTOS thread context switch)
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_StoreContext_S (TZ_MemoryId_t id);
#endif // TZ_CONTEXT_H

201
peripherals/cc48x6/bootloader/Drivers/CMSIS/LICENSE.txt Normal file
View file

@ -0,0 +1,201 @@
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
1. Definitions.
"License" shall mean the terms and conditions for use, reproduction,
and distribution as defined by Sections 1 through 9 of this document.
"Licensor" shall mean the copyright owner or entity authorized by
the copyright owner that is granting the License.
"Legal Entity" shall mean the union of the acting entity and all
other entities that control, are controlled by, or are under common
control with that entity. For the purposes of this definition,
"control" means (i) the power, direct or indirect, to cause the
direction or management of such entity, whether by contract or
otherwise, or (ii) ownership of fifty percent (50%) or more of the
outstanding shares, or (iii) beneficial ownership of such entity.
"You" (or "Your") shall mean an individual or Legal Entity
exercising permissions granted by this License.
"Source" form shall mean the preferred form for making modifications,
including but not limited to software source code, documentation
source, and configuration files.
"Object" form shall mean any form resulting from mechanical
transformation or translation of a Source form, including but
not limited to compiled object code, generated documentation,
and conversions to other media types.
"Work" shall mean the work of authorship, whether in Source or
Object form, made available under the License, as indicated by a
copyright notice that is included in or attached to the work
(an example is provided in the Appendix below).
"Derivative Works" shall mean any work, whether in Source or Object
form, that is based on (or derived from) the Work and for which the
editorial revisions, annotations, elaborations, or other modifications
represent, as a whole, an original work of authorship. For the purposes
of this License, Derivative Works shall not include works that remain
separable from, or merely link (or bind by name) to the interfaces of,
the Work and Derivative Works thereof.
"Contribution" shall mean any work of authorship, including
the original version of the Work and any modifications or additions
to that Work or Derivative Works thereof, that is intentionally
submitted to Licensor for inclusion in the Work by the copyright owner
or by an individual or Legal Entity authorized to submit on behalf of
the copyright owner. For the purposes of this definition, "submitted"
means any form of electronic, verbal, or written communication sent
to the Licensor or its representatives, including but not limited to
communication on electronic mailing lists, source code control systems,
and issue tracking systems that are managed by, or on behalf of, the
Licensor for the purpose of discussing and improving the Work, but
excluding communication that is conspicuously marked or otherwise
designated in writing by the copyright owner as "Not a Contribution."
"Contributor" shall mean Licensor and any individual or Legal Entity
on behalf of whom a Contribution has been received by Licensor and
subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of,
publicly display, publicly perform, sublicense, and distribute the
Work and such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made,
use, offer to sell, sell, import, and otherwise transfer the Work,
where such license applies only to those patent claims licensable
by such Contributor that are necessarily infringed by their
Contribution(s) alone or by combination of their Contribution(s)
with the Work to which such Contribution(s) was submitted. If You
institute patent litigation against any entity (including a
cross-claim or counterclaim in a lawsuit) alleging that the Work
or a Contribution incorporated within the Work constitutes direct
or contributory patent infringement, then any patent licenses
granted to You under this License for that Work shall terminate
as of the date such litigation is filed.
4. Redistribution. You may reproduce and distribute copies of the
Work or Derivative Works thereof in any medium, with or without
modifications, and in Source or Object form, provided that You
meet the following conditions:
(a) You must give any other recipients of the Work or
Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices
stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works
that You distribute, all copyright, patent, trademark, and
attribution notices from the Source form of the Work,
excluding those notices that do not pertain to any part of
the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its
distribution, then any Derivative Works that You distribute must
include a readable copy of the attribution notices contained
within such NOTICE file, excluding those notices that do not
pertain to any part of the Derivative Works, in at least one
of the following places: within a NOTICE text file distributed
as part of the Derivative Works; within the Source form or
documentation, if provided along with the Derivative Works; or,
within a display generated by the Derivative Works, if and
wherever such third-party notices normally appear. The contents
of the NOTICE file are for informational purposes only and
do not modify the License. You may add Your own attribution
notices within Derivative Works that You distribute, alongside
or as an addendum to the NOTICE text from the Work, provided
that such additional attribution notices cannot be construed
as modifying the License.
You may add Your own copyright statement to Your modifications and
may provide additional or different license terms and conditions
for use, reproduction, or distribution of Your modifications, or
for any such Derivative Works as a whole, provided Your use,
reproduction, and distribution of the Work otherwise complies with
the conditions stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise,
any Contribution intentionally submitted for inclusion in the Work
by You to the Licensor shall be under the terms and conditions of
this License, without any additional terms or conditions.
Notwithstanding the above, nothing herein shall supersede or modify
the terms of any separate license agreement you may have executed
with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade
names, trademarks, service marks, or product names of the Licensor,
except as required for reasonable and customary use in describing the
origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or
agreed to in writing, Licensor provides the Work (and each
Contributor provides its Contributions) on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied, including, without limitation, any warranties or conditions
of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
PARTICULAR PURPOSE. You are solely responsible for determining the
appropriateness of using or redistributing the Work and assume any
risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory,
whether in tort (including negligence), contract, or otherwise,
unless required by applicable law (such as deliberate and grossly
negligent acts) or agreed to in writing, shall any Contributor be
liable to You for damages, including any direct, indirect, special,
incidental, or consequential damages of any character arising as a
result of this License or out of the use or inability to use the
Work (including but not limited to damages for loss of goodwill,
work stoppage, computer failure or malfunction, or any and all
other commercial damages or losses), even if such Contributor
has been advised of the possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing
the Work or Derivative Works thereof, You may choose to offer,
and charge a fee for, acceptance of support, warranty, indemnity,
or other liability obligations and/or rights consistent with this
License. However, in accepting such obligations, You may act only
on Your own behalf and on Your sole responsibility, not on behalf
of any other Contributor, and only if You agree to indemnify,
defend, and hold each Contributor harmless for any liability
incurred by, or claims asserted against, such Contributor by reason
of your accepting any such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following
boilerplate notice, with the fields enclosed by brackets "{}"
replaced with your own identifying information. (Don't include
the brackets!) The text should be enclosed in the appropriate
comment syntax for the file format. We also recommend that a
file or class name and description of purpose be included on the
same "printed page" as the copyright notice for easier
identification within third-party archives.
Copyright {yyyy} {name of copyright owner}
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

845
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_bus.h Normal file
View file

@ -0,0 +1,845 @@
/**
******************************************************************************
* @file stm32f0xx_ll_bus.h
* @author MCD Application Team
* @brief Header file of BUS LL module.
@verbatim
##### RCC Limitations #####
==============================================================================
[..]
A delay between an RCC peripheral clock enable and the effective peripheral
enabling should be taken into account in order to manage the peripheral read/write
from/to registers.
(+) This delay depends on the peripheral mapping.
(++) AHB & APB peripherals, 1 dummy read is necessary
[..]
Workarounds:
(#) For AHB & APB peripherals, a dummy read to the peripheral register has been
inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_LL_BUS_H
#define __STM32F0xx_LL_BUS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
#if defined(RCC)
/** @defgroup BUS_LL BUS
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
* @{
*/
/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
* @{
*/
#define LL_AHB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN
#if defined(DMA2)
#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN
#endif /*DMA2*/
#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBENR_SRAMEN
#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLITFEN
#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN
#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHBENR_GPIOAEN
#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHBENR_GPIOBEN
#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHBENR_GPIOCEN
#if defined(GPIOD)
#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHBENR_GPIODEN
#endif /*GPIOD*/
#if defined(GPIOE)
#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHBENR_GPIOEEN
#endif /*GPIOE*/
#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHBENR_GPIOFEN
#if defined(TSC)
#define LL_AHB1_GRP1_PERIPH_TSC RCC_AHBENR_TSCEN
#endif /*TSC*/
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
* @{
*/
#define LL_APB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
#if defined(TIM2)
#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN
#endif /*TIM2*/
#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN
#if defined(TIM6)
#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN
#endif /*TIM6*/
#if defined(TIM7)
#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN
#endif /*TIM7*/
#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN
#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN
#if defined(SPI2)
#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN
#endif /*SPI2*/
#if defined(USART2)
#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN
#endif /* USART2 */
#if defined(USART3)
#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN
#endif /* USART3 */
#if defined(USART4)
#define LL_APB1_GRP1_PERIPH_USART4 RCC_APB1ENR_USART4EN
#endif /* USART4 */
#if defined(USART5)
#define LL_APB1_GRP1_PERIPH_USART5 RCC_APB1ENR_USART5EN
#endif /* USART5 */
#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN
#if defined(I2C2)
#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN
#endif /*I2C2*/
#if defined(USB)
#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN
#endif /* USB */
#if defined(CAN)
#define LL_APB1_GRP1_PERIPH_CAN RCC_APB1ENR_CANEN
#endif /*CAN*/
#if defined(CRS)
#define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR_CRSEN
#endif /*CRS*/
#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN
#if defined(DAC)
#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN
#endif /*DAC*/
#if defined(CEC)
#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN
#endif /*CEC*/
/**
* @}
*/
/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH
* @{
*/
#define LL_APB1_GRP2_PERIPH_ALL (uint32_t)0xFFFFFFFFU
#define LL_APB1_GRP2_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
#define LL_APB1_GRP2_PERIPH_ADC1 RCC_APB2ENR_ADC1EN
#if defined(USART8)
#define LL_APB1_GRP2_PERIPH_USART8 RCC_APB2ENR_USART8EN
#endif /*USART8*/
#if defined(USART7)
#define LL_APB1_GRP2_PERIPH_USART7 RCC_APB2ENR_USART7EN
#endif /*USART7*/
#if defined(USART6)
#define LL_APB1_GRP2_PERIPH_USART6 RCC_APB2ENR_USART6EN
#endif /*USART6*/
#define LL_APB1_GRP2_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
#define LL_APB1_GRP2_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
#define LL_APB1_GRP2_PERIPH_USART1 RCC_APB2ENR_USART1EN
#if defined(TIM15)
#define LL_APB1_GRP2_PERIPH_TIM15 RCC_APB2ENR_TIM15EN
#endif /*TIM15*/
#define LL_APB1_GRP2_PERIPH_TIM16 RCC_APB2ENR_TIM16EN
#define LL_APB1_GRP2_PERIPH_TIM17 RCC_APB2ENR_TIM17EN
#define LL_APB1_GRP2_PERIPH_DBGMCU RCC_APB2ENR_DBGMCUEN
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
* @{
*/
/** @defgroup BUS_LL_EF_AHB1 AHB1
* @{
*/
/**
* @brief Enable AHB1 peripherals clock.
* @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n
* AHBENR DMA2EN LL_AHB1_GRP1_EnableClock\n
* AHBENR SRAMEN LL_AHB1_GRP1_EnableClock\n
* AHBENR FLITFEN LL_AHB1_GRP1_EnableClock\n
* AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n
* AHBENR GPIOAEN LL_AHB1_GRP1_EnableClock\n
* AHBENR GPIOBEN LL_AHB1_GRP1_EnableClock\n
* AHBENR GPIOCEN LL_AHB1_GRP1_EnableClock\n
* AHBENR GPIODEN LL_AHB1_GRP1_EnableClock\n
* AHBENR GPIOEEN LL_AHB1_GRP1_EnableClock\n
* AHBENR GPIOFEN LL_AHB1_GRP1_EnableClock\n
* AHBENR TSCEN LL_AHB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->AHBENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHBENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if AHB1 peripheral clock is enabled or not
* @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR SRAMEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR FLITFEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n
* AHBENR TSCEN LL_AHB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->AHBENR, Periphs) == Periphs);
}
/**
* @brief Disable AHB1 peripherals clock.
* @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n
* AHBENR DMA2EN LL_AHB1_GRP1_DisableClock\n
* AHBENR SRAMEN LL_AHB1_GRP1_DisableClock\n
* AHBENR FLITFEN LL_AHB1_GRP1_DisableClock\n
* AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n
* AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock\n
* AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock\n
* AHBENR GPIOCEN LL_AHB1_GRP1_DisableClock\n
* AHBENR GPIODEN LL_AHB1_GRP1_DisableClock\n
* AHBENR GPIOEEN LL_AHB1_GRP1_DisableClock\n
* AHBENR GPIOFEN LL_AHB1_GRP1_DisableClock\n
* AHBENR TSCEN LL_AHB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
* @arg @ref LL_AHB1_GRP1_PERIPH_CRC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHBENR, Periphs);
}
/**
* @brief Force AHB1 peripherals reset.
* @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR GPIODRST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR GPIOERST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR TSCRST LL_AHB1_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->AHBRSTR, Periphs);
}
/**
* @brief Release AHB1 peripherals reset.
* @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n
* AHBRSTR TSCRST LL_AHB1_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
* @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
* @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->AHBRSTR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB1_GRP1 APB1 GRP1
* @{
*/
/**
* @brief Enable APB1 peripherals clock (available in register 1).
* @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n
* APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n
* APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n
* APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USART4EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USART5EN LL_APB1_GRP1_EnableClock\n
* APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n
* APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n
* APB1ENR USBEN LL_APB1_GRP1_EnableClock\n
* APB1ENR CANEN LL_APB1_GRP1_EnableClock\n
* APB1ENR CRSEN LL_APB1_GRP1_EnableClock\n
* APB1ENR PWREN LL_APB1_GRP1_EnableClock\n
* APB1ENR DACEN LL_APB1_GRP1_EnableClock\n
* APB1ENR CECEN LL_APB1_GRP1_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB1ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB1ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB1 peripheral clock is enabled or not (available in register 1).
* @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USART4EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USART5EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR USBEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR CANEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR CRSEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n
* APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs);
}
/**
* @brief Disable APB1 peripherals clock (available in register 1).
* @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n
* APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n
* APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n
* APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USART4EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USART5EN LL_APB1_GRP1_DisableClock\n
* APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n
* APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n
* APB1ENR USBEN LL_APB1_GRP1_DisableClock\n
* APB1ENR CANEN LL_APB1_GRP1_DisableClock\n
* APB1ENR CRSEN LL_APB1_GRP1_DisableClock\n
* APB1ENR PWREN LL_APB1_GRP1_DisableClock\n
* APB1ENR DACEN LL_APB1_GRP1_DisableClock\n
* APB1ENR CECEN LL_APB1_GRP1_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1ENR, Periphs);
}
/**
* @brief Force APB1 peripherals reset (available in register 1).
* @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USART4RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USART5RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n
* APB1RSTR USBRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR CANRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR CRSRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n
* APB1RSTR CECRST LL_APB1_GRP1_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_ALL
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB1RSTR, Periphs);
}
/**
* @brief Release APB1 peripherals reset (available in register 1).
* @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USART4RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USART5RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR USBRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR CANRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR CRSRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n
* APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP1_PERIPH_ALL
* @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM3
* @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_TIM14
* @arg @ref LL_APB1_GRP1_PERIPH_WWDG
* @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_I2C1
* @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
* @arg @ref LL_APB1_GRP1_PERIPH_PWR
* @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
* @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB1RSTR, Periphs);
}
/**
* @}
*/
/** @defgroup BUS_LL_EF_APB1_GRP2 APB1 GRP2
* @{
*/
/**
* @brief Enable APB1 peripherals clock (available in register 2).
* @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_EnableClock\n
* APB2ENR ADC1EN LL_APB1_GRP2_EnableClock\n
* APB2ENR USART8EN LL_APB1_GRP2_EnableClock\n
* APB2ENR USART7EN LL_APB1_GRP2_EnableClock\n
* APB2ENR USART6EN LL_APB1_GRP2_EnableClock\n
* APB2ENR TIM1EN LL_APB1_GRP2_EnableClock\n
* APB2ENR SPI1EN LL_APB1_GRP2_EnableClock\n
* APB2ENR USART1EN LL_APB1_GRP2_EnableClock\n
* APB2ENR TIM15EN LL_APB1_GRP2_EnableClock\n
* APB2ENR TIM16EN LL_APB1_GRP2_EnableClock\n
* APB2ENR TIM17EN LL_APB1_GRP2_EnableClock\n
* APB2ENR DBGMCUEN LL_APB1_GRP2_EnableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
* @arg @ref LL_APB1_GRP2_PERIPH_ADC1
* @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM1
* @arg @ref LL_APB1_GRP2_PERIPH_SPI1
* @arg @ref LL_APB1_GRP2_PERIPH_USART1
* @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM16
* @arg @ref LL_APB1_GRP2_PERIPH_TIM17
* @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs)
{
__IO uint32_t tmpreg;
SET_BIT(RCC->APB2ENR, Periphs);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
(void)tmpreg;
}
/**
* @brief Check if APB1 peripheral clock is enabled or not (available in register 2).
* @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR ADC1EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR USART8EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR USART7EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR USART6EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR TIM1EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR SPI1EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR USART1EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR TIM15EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR TIM16EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR TIM17EN LL_APB1_GRP2_IsEnabledClock\n
* APB2ENR DBGMCUEN LL_APB1_GRP2_IsEnabledClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
* @arg @ref LL_APB1_GRP2_PERIPH_ADC1
* @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM1
* @arg @ref LL_APB1_GRP2_PERIPH_SPI1
* @arg @ref LL_APB1_GRP2_PERIPH_USART1
* @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM16
* @arg @ref LL_APB1_GRP2_PERIPH_TIM17
* @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
*
* (*) value not defined in all devices.
* @retval State of Periphs (1 or 0).
*/
__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs)
{
return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
}
/**
* @brief Disable APB1 peripherals clock (available in register 2).
* @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_DisableClock\n
* APB2ENR ADC1EN LL_APB1_GRP2_DisableClock\n
* APB2ENR USART8EN LL_APB1_GRP2_DisableClock\n
* APB2ENR USART7EN LL_APB1_GRP2_DisableClock\n
* APB2ENR USART6EN LL_APB1_GRP2_DisableClock\n
* APB2ENR TIM1EN LL_APB1_GRP2_DisableClock\n
* APB2ENR SPI1EN LL_APB1_GRP2_DisableClock\n
* APB2ENR USART1EN LL_APB1_GRP2_DisableClock\n
* APB2ENR TIM15EN LL_APB1_GRP2_DisableClock\n
* APB2ENR TIM16EN LL_APB1_GRP2_DisableClock\n
* APB2ENR TIM17EN LL_APB1_GRP2_DisableClock\n
* APB2ENR DBGMCUEN LL_APB1_GRP2_DisableClock
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
* @arg @ref LL_APB1_GRP2_PERIPH_ADC1
* @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM1
* @arg @ref LL_APB1_GRP2_PERIPH_SPI1
* @arg @ref LL_APB1_GRP2_PERIPH_USART1
* @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM16
* @arg @ref LL_APB1_GRP2_PERIPH_TIM17
* @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2ENR, Periphs);
}
/**
* @brief Force APB1 peripherals reset (available in register 2).
* @rmtoll APB2RSTR SYSCFGRST LL_APB1_GRP2_ForceReset\n
* APB2RSTR ADC1RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR USART8RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR USART7RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR USART6RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR TIM1RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR SPI1RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR USART1RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR TIM15RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR TIM16RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR TIM17RST LL_APB1_GRP2_ForceReset\n
* APB2RSTR DBGMCURST LL_APB1_GRP2_ForceReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_ALL
* @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
* @arg @ref LL_APB1_GRP2_PERIPH_ADC1
* @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM1
* @arg @ref LL_APB1_GRP2_PERIPH_SPI1
* @arg @ref LL_APB1_GRP2_PERIPH_USART1
* @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM16
* @arg @ref LL_APB1_GRP2_PERIPH_TIM17
* @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs)
{
SET_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @brief Release APB1 peripherals reset (available in register 2).
* @rmtoll APB2RSTR SYSCFGRST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR ADC1RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR USART8RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR USART7RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR USART6RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR TIM1RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR SPI1RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR USART1RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR TIM15RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR TIM16RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR TIM17RST LL_APB1_GRP2_ReleaseReset\n
* APB2RSTR DBGMCURST LL_APB1_GRP2_ReleaseReset
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_APB1_GRP2_PERIPH_ALL
* @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
* @arg @ref LL_APB1_GRP2_PERIPH_ADC1
* @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM1
* @arg @ref LL_APB1_GRP2_PERIPH_SPI1
* @arg @ref LL_APB1_GRP2_PERIPH_USART1
* @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
* @arg @ref LL_APB1_GRP2_PERIPH_TIM16
* @arg @ref LL_APB1_GRP2_PERIPH_TIM17
* @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs)
{
CLEAR_BIT(RCC->APB2RSTR, Periphs);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined(RCC) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_LL_BUS_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

320
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_cortex.h Normal file
View file

@ -0,0 +1,320 @@
/**
******************************************************************************
* @file stm32f0xx_ll_cortex.h
* @author MCD Application Team
* @brief Header file of CORTEX LL module.
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The LL CORTEX driver contains a set of generic APIs that can be
used by user:
(+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick
functions
(+) Low power mode configuration (SCB register of Cortex-MCU)
(+) API to access to MCU info (CPUID register)
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_LL_CORTEX_H
#define __STM32F0xx_LL_CORTEX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
/** @defgroup CORTEX_LL CORTEX
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
* @{
*/
/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
* @{
*/
#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/
#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
* @{
*/
/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
* @{
*/
/**
* @brief This function checks if the Systick counter flag is active or not.
* @note It can be used in timeout function on application side.
* @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
{
return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
}
/**
* @brief Configures the SysTick clock source
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
* @retval None
*/
__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
{
if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
{
SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
}
else
{
CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
}
}
/**
* @brief Get the SysTick clock source
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
*/
__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
{
return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
}
/**
* @brief Enable SysTick exception request
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT
* @retval None
*/
__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
{
SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
}
/**
* @brief Disable SysTick exception request
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT
* @retval None
*/
__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
{
CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
}
/**
* @brief Checks if the SYSTICK interrupt is enabled or disabled.
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
{
return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk));
}
/**
* @}
*/
/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
* @{
*/
/**
* @brief Processor uses sleep as its low power mode
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableSleep(void)
{
/* Clear SLEEPDEEP bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
}
/**
* @brief Processor uses deep sleep as its low power mode
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
{
/* Set SLEEPDEEP bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
}
/**
* @brief Configures sleep-on-exit when returning from Handler mode to Thread mode.
* @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
* empty main application.
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
{
/* Set SLEEPONEXIT bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
}
/**
* @brief Do not sleep when returning to Thread mode.
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit
* @retval None
*/
__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
{
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
}
/**
* @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the
* processor.
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
{
/* Set SEVEONPEND bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
}
/**
* @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are
* excluded
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend
* @retval None
*/
__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
{
/* Clear SEVEONPEND bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
}
/**
* @}
*/
/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
* @{
*/
/**
* @brief Get Implementer code
* @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer
* @retval Value should be equal to 0x41 for ARM
*/
__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
}
/**
* @brief Get Variant number (The r value in the rnpn product revision identifier)
* @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant
* @retval Value between 0 and 255 (0x0: revision 0)
*/
__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
}
/**
* @brief Get Architecture number
* @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetArchitecture
* @retval Value should be equal to 0xC for Cortex-M0 devices
*/
__STATIC_INLINE uint32_t LL_CPUID_GetArchitecture(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
}
/**
* @brief Get Part number
* @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo
* @retval Value should be equal to 0xC20 for Cortex-M0
*/
__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
}
/**
* @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
* @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision
* @retval Value between 0 and 255 (0x1: patch 1)
*/
__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_LL_CORTEX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

783
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_crs.h Normal file
View file

@ -0,0 +1,783 @@
/**
******************************************************************************
* @file stm32f0xx_ll_crs.h
* @author MCD Application Team
* @brief Header file of CRS LL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_LL_CRS_H
#define __STM32F0xx_LL_CRS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
#if defined(CRS)
/** @defgroup CRS_LL CRS
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CRS_LL_Exported_Constants CRS Exported Constants
* @{
*/
/** @defgroup CRS_LL_EC_GET_FLAG Get Flags Defines
* @brief Flags defines which can be used with LL_CRS_ReadReg function
* @{
*/
#define LL_CRS_ISR_SYNCOKF CRS_ISR_SYNCOKF
#define LL_CRS_ISR_SYNCWARNF CRS_ISR_SYNCWARNF
#define LL_CRS_ISR_ERRF CRS_ISR_ERRF
#define LL_CRS_ISR_ESYNCF CRS_ISR_ESYNCF
#define LL_CRS_ISR_SYNCERR CRS_ISR_SYNCERR
#define LL_CRS_ISR_SYNCMISS CRS_ISR_SYNCMISS
#define LL_CRS_ISR_TRIMOVF CRS_ISR_TRIMOVF
/**
* @}
*/
/** @defgroup CRS_LL_EC_IT IT Defines
* @brief IT defines which can be used with LL_CRS_ReadReg and LL_CRS_WriteReg functions
* @{
*/
#define LL_CRS_CR_SYNCOKIE CRS_CR_SYNCOKIE
#define LL_CRS_CR_SYNCWARNIE CRS_CR_SYNCWARNIE
#define LL_CRS_CR_ERRIE CRS_CR_ERRIE
#define LL_CRS_CR_ESYNCIE CRS_CR_ESYNCIE
/**
* @}
*/
/** @defgroup CRS_LL_EC_SYNC_DIV Synchronization Signal Divider
* @{
*/
#define LL_CRS_SYNC_DIV_1 ((uint32_t)0x00U) /*!< Synchro Signal not divided (default) */
#define LL_CRS_SYNC_DIV_2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */
#define LL_CRS_SYNC_DIV_4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */
#define LL_CRS_SYNC_DIV_8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */
#define LL_CRS_SYNC_DIV_16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */
#define LL_CRS_SYNC_DIV_32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */
#define LL_CRS_SYNC_DIV_64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */
#define LL_CRS_SYNC_DIV_128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */
/**
* @}
*/
/** @defgroup CRS_LL_EC_SYNC_SOURCE Synchronization Signal Source
* @{
*/
#define LL_CRS_SYNC_SOURCE_GPIO ((uint32_t)0x00U) /*!< Synchro Signal soucre GPIO */
#define LL_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */
#define LL_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/
/**
* @}
*/
/** @defgroup CRS_LL_EC_SYNC_POLARITY Synchronization Signal Polarity
* @{
*/
#define LL_CRS_SYNC_POLARITY_RISING ((uint32_t)0x00U) /*!< Synchro Active on rising edge (default) */
#define LL_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */
/**
* @}
*/
/** @defgroup CRS_LL_EC_FREQERRORDIR Frequency Error Direction
* @{
*/
#define LL_CRS_FREQ_ERROR_DIR_UP ((uint32_t)0x00U) /*!< Upcounting direction, the actual frequency is above the target */
#define LL_CRS_FREQ_ERROR_DIR_DOWN ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */
/**
* @}
*/
/** @defgroup CRS_LL_EC_DEFAULTVALUES Default Values
* @{
*/
/**
* @brief Reset value of the RELOAD field
* @note The reset value of the RELOAD field corresponds to a target frequency of 48 MHz
* and a synchronization signal frequency of 1 kHz (SOF signal from USB)
*/
#define LL_CRS_RELOADVALUE_DEFAULT ((uint32_t)0xBB7FU)
/**
* @brief Reset value of Frequency error limit.
*/
#define LL_CRS_ERRORLIMIT_DEFAULT ((uint32_t)0x22U)
/**
* @brief Reset value of the HSI48 Calibration field
* @note The default value is 32, which corresponds to the middle of the trimming interval.
* The trimming step is around 67 kHz between two consecutive TRIM steps.
* A higher TRIM value corresponds to a higher output frequency
*/
#define LL_CRS_HSI48CALIBRATION_DEFAULT ((uint32_t)0x20U)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup CRS_LL_Exported_Macros CRS Exported Macros
* @{
*/
/** @defgroup CRS_LL_EM_WRITE_READ Common Write and read registers Macros
* @{
*/
/**
* @brief Write a value in CRS register
* @param __INSTANCE__ CRS Instance
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_CRS_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
/**
* @brief Read a value in CRS register
* @param __INSTANCE__ CRS Instance
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_CRS_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
/**
* @}
*/
/** @defgroup CRS_LL_EM_Exported_Macros_Calculate_Reload Exported_Macros_Calculate_Reload
* @{
*/
/**
* @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies
* @note The RELOAD value should be selected according to the ratio between
* the target frequency and the frequency of the synchronization source after
* prescaling. It is then decreased by one in order to reach the expected
* synchronization on the zero value. The formula is the following:
* RELOAD = (fTARGET / fSYNC) -1
* @param __FTARGET__ Target frequency (value in Hz)
* @param __FSYNC__ Synchronization signal frequency (value in Hz)
* @retval Reload value (in Hz)
*/
#define __LL_CRS_CALC_CALCULATE_RELOADVALUE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup CRS_LL_Exported_Functions CRS Exported Functions
* @{
*/
/** @defgroup CRS_LL_EF_Configuration Configuration
* @{
*/
/**
* @brief Enable Frequency error counter
* @note When this bit is set, the CRS_CFGR register is write-protected and cannot be modified
* @rmtoll CR CEN LL_CRS_EnableFreqErrorCounter
* @retval None
*/
__STATIC_INLINE void LL_CRS_EnableFreqErrorCounter(void)
{
SET_BIT(CRS->CR, CRS_CR_CEN);
}
/**
* @brief Disable Frequency error counter
* @rmtoll CR CEN LL_CRS_DisableFreqErrorCounter
* @retval None
*/
__STATIC_INLINE void LL_CRS_DisableFreqErrorCounter(void)
{
CLEAR_BIT(CRS->CR, CRS_CR_CEN);
}
/**
* @brief Check if Frequency error counter is enabled or not
* @rmtoll CR CEN LL_CRS_IsEnabledFreqErrorCounter
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsEnabledFreqErrorCounter(void)
{
return (READ_BIT(CRS->CR, CRS_CR_CEN) == (CRS_CR_CEN));
}
/**
* @brief Enable Automatic trimming counter
* @rmtoll CR AUTOTRIMEN LL_CRS_EnableAutoTrimming
* @retval None
*/
__STATIC_INLINE void LL_CRS_EnableAutoTrimming(void)
{
SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN);
}
/**
* @brief Disable Automatic trimming counter
* @rmtoll CR AUTOTRIMEN LL_CRS_DisableAutoTrimming
* @retval None
*/
__STATIC_INLINE void LL_CRS_DisableAutoTrimming(void)
{
CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN);
}
/**
* @brief Check if Automatic trimming is enabled or not
* @rmtoll CR AUTOTRIMEN LL_CRS_IsEnabledAutoTrimming
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsEnabledAutoTrimming(void)
{
return (READ_BIT(CRS->CR, CRS_CR_AUTOTRIMEN) == (CRS_CR_AUTOTRIMEN));
}
/**
* @brief Set HSI48 oscillator smooth trimming
* @note When the AUTOTRIMEN bit is set, this field is controlled by hardware and is read-only
* @rmtoll CR TRIM LL_CRS_SetHSI48SmoothTrimming
* @param Value a number between Min_Data = 0 and Max_Data = 63
* @note Default value can be set thanks to @ref LL_CRS_HSI48CALIBRATION_DEFAULT
* @retval None
*/
__STATIC_INLINE void LL_CRS_SetHSI48SmoothTrimming(uint32_t Value)
{
MODIFY_REG(CRS->CR, CRS_CR_TRIM, Value << CRS_CR_TRIM_Pos);
}
/**
* @brief Get HSI48 oscillator smooth trimming
* @rmtoll CR TRIM LL_CRS_GetHSI48SmoothTrimming
* @retval a number between Min_Data = 0 and Max_Data = 63
*/
__STATIC_INLINE uint32_t LL_CRS_GetHSI48SmoothTrimming(void)
{
return (uint32_t)(READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos);
}
/**
* @brief Set counter reload value
* @rmtoll CFGR RELOAD LL_CRS_SetReloadCounter
* @param Value a number between Min_Data = 0 and Max_Data = 0xFFFF
* @note Default value can be set thanks to @ref LL_CRS_RELOADVALUE_DEFAULT
* Otherwise it can be calculated in using macro @ref __LL_CRS_CALC_CALCULATE_RELOADVALUE (_FTARGET_, _FSYNC_)
* @retval None
*/
__STATIC_INLINE void LL_CRS_SetReloadCounter(uint32_t Value)
{
MODIFY_REG(CRS->CFGR, CRS_CFGR_RELOAD, Value);
}
/**
* @brief Get counter reload value
* @rmtoll CFGR RELOAD LL_CRS_GetReloadCounter
* @retval a number between Min_Data = 0 and Max_Data = 0xFFFF
*/
__STATIC_INLINE uint32_t LL_CRS_GetReloadCounter(void)
{
return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD));
}
/**
* @brief Set frequency error limit
* @rmtoll CFGR FELIM LL_CRS_SetFreqErrorLimit
* @param Value a number between Min_Data = 0 and Max_Data = 255
* @note Default value can be set thanks to @ref LL_CRS_ERRORLIMIT_DEFAULT
* @retval None
*/
__STATIC_INLINE void LL_CRS_SetFreqErrorLimit(uint32_t Value)
{
MODIFY_REG(CRS->CFGR, CRS_CFGR_FELIM, Value << CRS_CFGR_FELIM_Pos);
}
/**
* @brief Get frequency error limit
* @rmtoll CFGR FELIM LL_CRS_GetFreqErrorLimit
* @retval A number between Min_Data = 0 and Max_Data = 255
*/
__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorLimit(void)
{
return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_FELIM) >> CRS_CFGR_FELIM_Pos);
}
/**
* @brief Set division factor for SYNC signal
* @rmtoll CFGR SYNCDIV LL_CRS_SetSyncDivider
* @param Divider This parameter can be one of the following values:
* @arg @ref LL_CRS_SYNC_DIV_1
* @arg @ref LL_CRS_SYNC_DIV_2
* @arg @ref LL_CRS_SYNC_DIV_4
* @arg @ref LL_CRS_SYNC_DIV_8
* @arg @ref LL_CRS_SYNC_DIV_16
* @arg @ref LL_CRS_SYNC_DIV_32
* @arg @ref LL_CRS_SYNC_DIV_64
* @arg @ref LL_CRS_SYNC_DIV_128
* @retval None
*/
__STATIC_INLINE void LL_CRS_SetSyncDivider(uint32_t Divider)
{
MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCDIV, Divider);
}
/**
* @brief Get division factor for SYNC signal
* @rmtoll CFGR SYNCDIV LL_CRS_GetSyncDivider
* @retval Returned value can be one of the following values:
* @arg @ref LL_CRS_SYNC_DIV_1
* @arg @ref LL_CRS_SYNC_DIV_2
* @arg @ref LL_CRS_SYNC_DIV_4
* @arg @ref LL_CRS_SYNC_DIV_8
* @arg @ref LL_CRS_SYNC_DIV_16
* @arg @ref LL_CRS_SYNC_DIV_32
* @arg @ref LL_CRS_SYNC_DIV_64
* @arg @ref LL_CRS_SYNC_DIV_128
*/
__STATIC_INLINE uint32_t LL_CRS_GetSyncDivider(void)
{
return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCDIV));
}
/**
* @brief Set SYNC signal source
* @rmtoll CFGR SYNCSRC LL_CRS_SetSyncSignalSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_CRS_SYNC_SOURCE_GPIO
* @arg @ref LL_CRS_SYNC_SOURCE_LSE
* @arg @ref LL_CRS_SYNC_SOURCE_USB
* @retval None
*/
__STATIC_INLINE void LL_CRS_SetSyncSignalSource(uint32_t Source)
{
MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCSRC, Source);
}
/**
* @brief Get SYNC signal source
* @rmtoll CFGR SYNCSRC LL_CRS_GetSyncSignalSource
* @retval Returned value can be one of the following values:
* @arg @ref LL_CRS_SYNC_SOURCE_GPIO
* @arg @ref LL_CRS_SYNC_SOURCE_LSE
* @arg @ref LL_CRS_SYNC_SOURCE_USB
*/
__STATIC_INLINE uint32_t LL_CRS_GetSyncSignalSource(void)
{
return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCSRC));
}
/**
* @brief Set input polarity for the SYNC signal source
* @rmtoll CFGR SYNCPOL LL_CRS_SetSyncPolarity
* @param Polarity This parameter can be one of the following values:
* @arg @ref LL_CRS_SYNC_POLARITY_RISING
* @arg @ref LL_CRS_SYNC_POLARITY_FALLING
* @retval None
*/
__STATIC_INLINE void LL_CRS_SetSyncPolarity(uint32_t Polarity)
{
MODIFY_REG(CRS->CFGR, CRS_CFGR_SYNCPOL, Polarity);
}
/**
* @brief Get input polarity for the SYNC signal source
* @rmtoll CFGR SYNCPOL LL_CRS_GetSyncPolarity
* @retval Returned value can be one of the following values:
* @arg @ref LL_CRS_SYNC_POLARITY_RISING
* @arg @ref LL_CRS_SYNC_POLARITY_FALLING
*/
__STATIC_INLINE uint32_t LL_CRS_GetSyncPolarity(void)
{
return (uint32_t)(READ_BIT(CRS->CFGR, CRS_CFGR_SYNCPOL));
}
/**
* @brief Configure CRS for the synchronization
* @rmtoll CR TRIM LL_CRS_ConfigSynchronization\n
* CFGR RELOAD LL_CRS_ConfigSynchronization\n
* CFGR FELIM LL_CRS_ConfigSynchronization\n
* CFGR SYNCDIV LL_CRS_ConfigSynchronization\n
* CFGR SYNCSRC LL_CRS_ConfigSynchronization\n
* CFGR SYNCPOL LL_CRS_ConfigSynchronization
* @param HSI48CalibrationValue a number between Min_Data = 0 and Max_Data = 63
* @param ErrorLimitValue a number between Min_Data = 0 and Max_Data = 0xFFFF
* @param ReloadValue a number between Min_Data = 0 and Max_Data = 255
* @param Settings This parameter can be a combination of the following values:
* @arg @ref LL_CRS_SYNC_DIV_1 or @ref LL_CRS_SYNC_DIV_2 or @ref LL_CRS_SYNC_DIV_4 or @ref LL_CRS_SYNC_DIV_8
* or @ref LL_CRS_SYNC_DIV_16 or @ref LL_CRS_SYNC_DIV_32 or @ref LL_CRS_SYNC_DIV_64 or @ref LL_CRS_SYNC_DIV_128
* @arg @ref LL_CRS_SYNC_SOURCE_GPIO or @ref LL_CRS_SYNC_SOURCE_LSE or @ref LL_CRS_SYNC_SOURCE_USB
* @arg @ref LL_CRS_SYNC_POLARITY_RISING or @ref LL_CRS_SYNC_POLARITY_FALLING
* @retval None
*/
__STATIC_INLINE void LL_CRS_ConfigSynchronization(uint32_t HSI48CalibrationValue, uint32_t ErrorLimitValue, uint32_t ReloadValue, uint32_t Settings)
{
MODIFY_REG(CRS->CR, CRS_CR_TRIM, HSI48CalibrationValue << CRS_CR_TRIM_Pos);
MODIFY_REG(CRS->CFGR,
CRS_CFGR_RELOAD | CRS_CFGR_FELIM | CRS_CFGR_SYNCDIV | CRS_CFGR_SYNCSRC | CRS_CFGR_SYNCPOL,
ReloadValue | (ErrorLimitValue << CRS_CFGR_FELIM_Pos) | Settings);
}
/**
* @}
*/
/** @defgroup CRS_LL_EF_CRS_Management CRS_Management
* @{
*/
/**
* @brief Generate software SYNC event
* @rmtoll CR SWSYNC LL_CRS_GenerateEvent_SWSYNC
* @retval None
*/
__STATIC_INLINE void LL_CRS_GenerateEvent_SWSYNC(void)
{
SET_BIT(CRS->CR, CRS_CR_SWSYNC);
}
/**
* @brief Get the frequency error direction latched in the time of the last
* SYNC event
* @rmtoll ISR FEDIR LL_CRS_GetFreqErrorDirection
* @retval Returned value can be one of the following values:
* @arg @ref LL_CRS_FREQ_ERROR_DIR_UP
* @arg @ref LL_CRS_FREQ_ERROR_DIR_DOWN
*/
__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorDirection(void)
{
return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FEDIR));
}
/**
* @brief Get the frequency error counter value latched in the time of the last SYNC event
* @rmtoll ISR FECAP LL_CRS_GetFreqErrorCapture
* @retval A number between Min_Data = 0x0000 and Max_Data = 0xFFFF
*/
__STATIC_INLINE uint32_t LL_CRS_GetFreqErrorCapture(void)
{
return (uint32_t)(READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos);
}
/**
* @}
*/
/** @defgroup CRS_LL_EF_FLAG_Management FLAG_Management
* @{
*/
/**
* @brief Check if SYNC event OK signal occurred or not
* @rmtoll ISR SYNCOKF LL_CRS_IsActiveFlag_SYNCOK
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCOK(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_SYNCOKF) == (CRS_ISR_SYNCOKF));
}
/**
* @brief Check if SYNC warning signal occurred or not
* @rmtoll ISR SYNCWARNF LL_CRS_IsActiveFlag_SYNCWARN
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCWARN(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_SYNCWARNF) == (CRS_ISR_SYNCWARNF));
}
/**
* @brief Check if Synchronization or trimming error signal occurred or not
* @rmtoll ISR ERRF LL_CRS_IsActiveFlag_ERR
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ERR(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_ERRF) == (CRS_ISR_ERRF));
}
/**
* @brief Check if Expected SYNC signal occurred or not
* @rmtoll ISR ESYNCF LL_CRS_IsActiveFlag_ESYNC
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_ESYNC(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_ESYNCF) == (CRS_ISR_ESYNCF));
}
/**
* @brief Check if SYNC error signal occurred or not
* @rmtoll ISR SYNCERR LL_CRS_IsActiveFlag_SYNCERR
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCERR(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_SYNCERR) == (CRS_ISR_SYNCERR));
}
/**
* @brief Check if SYNC missed error signal occurred or not
* @rmtoll ISR SYNCMISS LL_CRS_IsActiveFlag_SYNCMISS
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_SYNCMISS(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_SYNCMISS) == (CRS_ISR_SYNCMISS));
}
/**
* @brief Check if Trimming overflow or underflow occurred or not
* @rmtoll ISR TRIMOVF LL_CRS_IsActiveFlag_TRIMOVF
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsActiveFlag_TRIMOVF(void)
{
return (READ_BIT(CRS->ISR, CRS_ISR_TRIMOVF) == (CRS_ISR_TRIMOVF));
}
/**
* @brief Clear the SYNC event OK flag
* @rmtoll ICR SYNCOKC LL_CRS_ClearFlag_SYNCOK
* @retval None
*/
__STATIC_INLINE void LL_CRS_ClearFlag_SYNCOK(void)
{
WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC);
}
/**
* @brief Clear the SYNC warning flag
* @rmtoll ICR SYNCWARNC LL_CRS_ClearFlag_SYNCWARN
* @retval None
*/
__STATIC_INLINE void LL_CRS_ClearFlag_SYNCWARN(void)
{
WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC);
}
/**
* @brief Clear TRIMOVF, SYNCMISS and SYNCERR bits and consequently also
* the ERR flag
* @rmtoll ICR ERRC LL_CRS_ClearFlag_ERR
* @retval None
*/
__STATIC_INLINE void LL_CRS_ClearFlag_ERR(void)
{
WRITE_REG(CRS->ICR, CRS_ICR_ERRC);
}
/**
* @brief Clear Expected SYNC flag
* @rmtoll ICR ESYNCC LL_CRS_ClearFlag_ESYNC
* @retval None
*/
__STATIC_INLINE void LL_CRS_ClearFlag_ESYNC(void)
{
WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC);
}
/**
* @}
*/
/** @defgroup CRS_LL_EF_IT_Management IT_Management
* @{
*/
/**
* @brief Enable SYNC event OK interrupt
* @rmtoll CR SYNCOKIE LL_CRS_EnableIT_SYNCOK
* @retval None
*/
__STATIC_INLINE void LL_CRS_EnableIT_SYNCOK(void)
{
SET_BIT(CRS->CR, CRS_CR_SYNCOKIE);
}
/**
* @brief Disable SYNC event OK interrupt
* @rmtoll CR SYNCOKIE LL_CRS_DisableIT_SYNCOK
* @retval None
*/
__STATIC_INLINE void LL_CRS_DisableIT_SYNCOK(void)
{
CLEAR_BIT(CRS->CR, CRS_CR_SYNCOKIE);
}
/**
* @brief Check if SYNC event OK interrupt is enabled or not
* @rmtoll CR SYNCOKIE LL_CRS_IsEnabledIT_SYNCOK
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCOK(void)
{
return (READ_BIT(CRS->CR, CRS_CR_SYNCOKIE) == (CRS_CR_SYNCOKIE));
}
/**
* @brief Enable SYNC warning interrupt
* @rmtoll CR SYNCWARNIE LL_CRS_EnableIT_SYNCWARN
* @retval None
*/
__STATIC_INLINE void LL_CRS_EnableIT_SYNCWARN(void)
{
SET_BIT(CRS->CR, CRS_CR_SYNCWARNIE);
}
/**
* @brief Disable SYNC warning interrupt
* @rmtoll CR SYNCWARNIE LL_CRS_DisableIT_SYNCWARN
* @retval None
*/
__STATIC_INLINE void LL_CRS_DisableIT_SYNCWARN(void)
{
CLEAR_BIT(CRS->CR, CRS_CR_SYNCWARNIE);
}
/**
* @brief Check if SYNC warning interrupt is enabled or not
* @rmtoll CR SYNCWARNIE LL_CRS_IsEnabledIT_SYNCWARN
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_SYNCWARN(void)
{
return (READ_BIT(CRS->CR, CRS_CR_SYNCWARNIE) == (CRS_CR_SYNCWARNIE));
}
/**
* @brief Enable Synchronization or trimming error interrupt
* @rmtoll CR ERRIE LL_CRS_EnableIT_ERR
* @retval None
*/
__STATIC_INLINE void LL_CRS_EnableIT_ERR(void)
{
SET_BIT(CRS->CR, CRS_CR_ERRIE);
}
/**
* @brief Disable Synchronization or trimming error interrupt
* @rmtoll CR ERRIE LL_CRS_DisableIT_ERR
* @retval None
*/
__STATIC_INLINE void LL_CRS_DisableIT_ERR(void)
{
CLEAR_BIT(CRS->CR, CRS_CR_ERRIE);
}
/**
* @brief Check if Synchronization or trimming error interrupt is enabled or not
* @rmtoll CR ERRIE LL_CRS_IsEnabledIT_ERR
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ERR(void)
{
return (READ_BIT(CRS->CR, CRS_CR_ERRIE) == (CRS_CR_ERRIE));
}
/**
* @brief Enable Expected SYNC interrupt
* @rmtoll CR ESYNCIE LL_CRS_EnableIT_ESYNC
* @retval None
*/
__STATIC_INLINE void LL_CRS_EnableIT_ESYNC(void)
{
SET_BIT(CRS->CR, CRS_CR_ESYNCIE);
}
/**
* @brief Disable Expected SYNC interrupt
* @rmtoll CR ESYNCIE LL_CRS_DisableIT_ESYNC
* @retval None
*/
__STATIC_INLINE void LL_CRS_DisableIT_ESYNC(void)
{
CLEAR_BIT(CRS->CR, CRS_CR_ESYNCIE);
}
/**
* @brief Check if Expected SYNC interrupt is enabled or not
* @rmtoll CR ESYNCIE LL_CRS_IsEnabledIT_ESYNC
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_CRS_IsEnabledIT_ESYNC(void)
{
return (READ_BIT(CRS->CR, CRS_CR_ESYNCIE) == (CRS_CR_ESYNCIE));
}
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup CRS_LL_EF_Init Initialization and de-initialization functions
* @{
*/
ErrorStatus LL_CRS_DeInit(void);
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/**
* @}
*/
/**
* @}
*/
#endif /* defined(CRS) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_LL_CRS_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2236
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_dma.h Normal file
View file

File diff suppressed because it is too large Load diff

1016
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_exti.h Normal file
View file

File diff suppressed because it is too large Load diff

940
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_gpio.h Normal file
View file

@ -0,0 +1,940 @@
/**
******************************************************************************
* @file stm32f0xx_ll_gpio.h
* @author MCD Application Team
* @brief Header file of GPIO LL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_LL_GPIO_H
#define __STM32F0xx_LL_GPIO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF)
/** @defgroup GPIO_LL GPIO
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros
* @{
*/
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported types ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures
* @{
*/
/**
* @brief LL GPIO Init Structure definition
*/
typedef struct
{
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
This parameter can be any value of @ref GPIO_LL_EC_PIN */
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
This parameter can be a value of @ref GPIO_LL_EC_MODE.
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/
uint32_t Speed; /*!< Specifies the speed for the selected pins.
This parameter can be a value of @ref GPIO_LL_EC_SPEED.
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/
uint32_t OutputType; /*!< Specifies the operating output type for the selected pins.
This parameter can be a value of @ref GPIO_LL_EC_OUTPUT.
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/
uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
This parameter can be a value of @ref GPIO_LL_EC_PULL.
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/
uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins.
This parameter can be a value of @ref GPIO_LL_EC_AF.
GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/
} LL_GPIO_InitTypeDef;
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/* Exported constants --------------------------------------------------------*/
/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants
* @{
*/
/** @defgroup GPIO_LL_EC_PIN PIN
* @{
*/
#define LL_GPIO_PIN_0 GPIO_BSRR_BS_0 /*!< Select pin 0 */
#define LL_GPIO_PIN_1 GPIO_BSRR_BS_1 /*!< Select pin 1 */
#define LL_GPIO_PIN_2 GPIO_BSRR_BS_2 /*!< Select pin 2 */
#define LL_GPIO_PIN_3 GPIO_BSRR_BS_3 /*!< Select pin 3 */
#define LL_GPIO_PIN_4 GPIO_BSRR_BS_4 /*!< Select pin 4 */
#define LL_GPIO_PIN_5 GPIO_BSRR_BS_5 /*!< Select pin 5 */
#define LL_GPIO_PIN_6 GPIO_BSRR_BS_6 /*!< Select pin 6 */
#define LL_GPIO_PIN_7 GPIO_BSRR_BS_7 /*!< Select pin 7 */
#define LL_GPIO_PIN_8 GPIO_BSRR_BS_8 /*!< Select pin 8 */
#define LL_GPIO_PIN_9 GPIO_BSRR_BS_9 /*!< Select pin 9 */
#define LL_GPIO_PIN_10 GPIO_BSRR_BS_10 /*!< Select pin 10 */
#define LL_GPIO_PIN_11 GPIO_BSRR_BS_11 /*!< Select pin 11 */
#define LL_GPIO_PIN_12 GPIO_BSRR_BS_12 /*!< Select pin 12 */
#define LL_GPIO_PIN_13 GPIO_BSRR_BS_13 /*!< Select pin 13 */
#define LL_GPIO_PIN_14 GPIO_BSRR_BS_14 /*!< Select pin 14 */
#define LL_GPIO_PIN_15 GPIO_BSRR_BS_15 /*!< Select pin 15 */
#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS_0 | GPIO_BSRR_BS_1 | GPIO_BSRR_BS_2 | \
GPIO_BSRR_BS_3 | GPIO_BSRR_BS_4 | GPIO_BSRR_BS_5 | \
GPIO_BSRR_BS_6 | GPIO_BSRR_BS_7 | GPIO_BSRR_BS_8 | \
GPIO_BSRR_BS_9 | GPIO_BSRR_BS_10 | GPIO_BSRR_BS_11 | \
GPIO_BSRR_BS_12 | GPIO_BSRR_BS_13 | GPIO_BSRR_BS_14 | \
GPIO_BSRR_BS_15) /*!< Select all pins */
/**
* @}
*/
/** @defgroup GPIO_LL_EC_MODE Mode
* @{
*/
#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */
#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODER0_0 /*!< Select output mode */
#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODER0_1 /*!< Select alternate function mode */
#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODER0 /*!< Select analog mode */
/**
* @}
*/
/** @defgroup GPIO_LL_EC_OUTPUT Output Type
* @{
*/
#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */
#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT_0 /*!< Select open-drain as output type */
/**
* @}
*/
/** @defgroup GPIO_LL_EC_SPEED Output Speed
* @{
*/
#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */
#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEEDR0_0 /*!< Select I/O medium output speed */
#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEEDR0 /*!< Select I/O high output speed */
/**
* @}
*/
#define LL_GPIO_SPEED_LOW LL_GPIO_SPEED_FREQ_LOW
#define LL_GPIO_SPEED_MEDIUM LL_GPIO_SPEED_FREQ_MEDIUM
#define LL_GPIO_SPEED_HIGH LL_GPIO_SPEED_FREQ_HIGH
/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down
* @{
*/
#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */
#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPDR0_0 /*!< Select I/O pull up */
#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPDR0_1 /*!< Select I/O pull down */
/**
* @}
*/
/** @defgroup GPIO_LL_EC_AF Alternate Function
* @{
*/
#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */
#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */
#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */
#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */
#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */
#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */
#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */
#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros
* @{
*/
/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros
* @{
*/
/**
* @brief Write a value in GPIO register
* @param __INSTANCE__ GPIO Instance
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
/**
* @brief Read a value in GPIO register
* @param __INSTANCE__ GPIO Instance
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions
* @{
*/
/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration
* @{
*/
/**
* @brief Configure gpio mode for a dedicated pin on dedicated port.
* @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
* @note Warning: only one pin can be passed as parameter.
* @rmtoll MODER MODEy LL_GPIO_SetPinMode
* @param GPIOx GPIO Port
* @param Pin This parameter can be one of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @param Mode This parameter can be one of the following values:
* @arg @ref LL_GPIO_MODE_INPUT
* @arg @ref LL_GPIO_MODE_OUTPUT
* @arg @ref LL_GPIO_MODE_ALTERNATE
* @arg @ref LL_GPIO_MODE_ANALOG
* @retval None
*/
__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode)
{
MODIFY_REG(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODER0), ((Pin * Pin) * Mode));
}
/**
* @brief Return gpio mode for a dedicated pin on dedicated port.
* @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
* @note Warning: only one pin can be passed as parameter.
* @rmtoll MODER MODEy LL_GPIO_GetPinMode
* @param GPIOx GPIO Port
* @param Pin This parameter can be one of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @retval Returned value can be one of the following values:
* @arg @ref LL_GPIO_MODE_INPUT
* @arg @ref LL_GPIO_MODE_OUTPUT
* @arg @ref LL_GPIO_MODE_ALTERNATE
* @arg @ref LL_GPIO_MODE_ANALOG
*/
__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
{
return (uint32_t)(READ_BIT(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODER0)) / (Pin * Pin));
}
/**
* @brief Configure gpio output type for several pins on dedicated port.
* @note Output type as to be set when gpio pin is in output or
* alternate modes. Possible type are Push-pull or Open-drain.
* @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType
* @param GPIOx GPIO Port
* @param PinMask This parameter can be a combination of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @arg @ref LL_GPIO_PIN_ALL
* @param OutputType This parameter can be one of the following values:
* @arg @ref LL_GPIO_OUTPUT_PUSHPULL
* @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
* @retval None
*/
__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType)
{
MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType));
}
/**
* @brief Return gpio output type for several pins on dedicated port.
* @note Output type as to be set when gpio pin is in output or
* alternate modes. Possible type are Push-pull or Open-drain.
* @note Warning: only one pin can be passed as parameter.
* @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType
* @param GPIOx GPIO Port
* @param Pin This parameter can be one of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @arg @ref LL_GPIO_PIN_ALL
* @retval Returned value can be one of the following values:
* @arg @ref LL_GPIO_OUTPUT_PUSHPULL
* @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
*/
__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin)
{
return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) / Pin);
}
/**
* @brief Configure gpio speed for a dedicated pin on dedicated port.
* @note I/O speed can be Low, Medium, Fast or High speed.
* @note Warning: only one pin can be passed as parameter.
* @note Refer to datasheet for frequency specifications and the power
* supply and load conditions for each speed.
* @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed
* @param GPIOx GPIO Port
* @param Pin This parameter can be one of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @param Speed This parameter can be one of the following values:
* @arg @ref LL_GPIO_SPEED_FREQ_LOW
* @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
* @arg @ref LL_GPIO_SPEED_FREQ_HIGH
* @retval None
*/
__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed)
{
MODIFY_REG(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEEDR0), ((Pin * Pin) * Speed));
}
/**
* @brief Return gpio speed for a dedicated pin on dedicated port.
* @note I/O speed can be Low, Medium, Fast or High speed.
* @note Warning: only one pin can be passed as parameter.
* @note Refer to datasheet for frequency specifications and the power
* supply and load conditions for each speed.
* @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed
* @param GPIOx GPIO Port
* @param Pin This parameter can be one of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @retval Returned value can be one of the following values:
* @arg @ref LL_GPIO_SPEED_FREQ_LOW
* @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
* @arg @ref LL_GPIO_SPEED_FREQ_HIGH
*/
__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin)
{
return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEEDR0)) / (Pin * Pin));
}
/**
* @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port.
* @note Warning: only one pin can be passed as parameter.
* @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull
* @param GPIOx GPIO Port
* @param Pin This parameter can be one of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @param Pull This parameter can be one of the following values:
* @arg @ref LL_GPIO_PULL_NO
* @arg @ref LL_GPIO_PULL_UP
* @arg @ref LL_GPIO_PULL_DOWN
* @retval None
*/
__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull)
{
MODIFY_REG(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPDR0), ((Pin * Pin) * Pull));
}
/**
* @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port
* @note Warning: only one pin can be passed as parameter.
* @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull
* @param GPIOx GPIO Port
* @param Pin This parameter can be one of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @retval Returned value can be one of the following values:
* @arg @ref LL_GPIO_PULL_NO
* @arg @ref LL_GPIO_PULL_UP
* @arg @ref LL_GPIO_PULL_DOWN
*/
__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin)
{
return (uint32_t)(READ_BIT(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPDR0)) / (Pin * Pin));
}
/**
* @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
* @note Possible values are from AF0 to AF7 depending on target.
* @note Warning: only one pin can be passed as parameter.
* @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7
* @param GPIOx GPIO Port
* @param Pin This parameter can be one of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @param Alternate This parameter can be one of the following values:
* @arg @ref LL_GPIO_AF_0
* @arg @ref LL_GPIO_AF_1
* @arg @ref LL_GPIO_AF_2
* @arg @ref LL_GPIO_AF_3
* @arg @ref LL_GPIO_AF_4
* @arg @ref LL_GPIO_AF_5
* @arg @ref LL_GPIO_AF_6
* @arg @ref LL_GPIO_AF_7
* @retval None
*/
__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
{
MODIFY_REG(GPIOx->AFR[0], ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0),
((((Pin * Pin) * Pin) * Pin) * Alternate));
}
/**
* @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
* @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7
* @param GPIOx GPIO Port
* @param Pin This parameter can be one of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @retval Returned value can be one of the following values:
* @arg @ref LL_GPIO_AF_0
* @arg @ref LL_GPIO_AF_1
* @arg @ref LL_GPIO_AF_2
* @arg @ref LL_GPIO_AF_3
* @arg @ref LL_GPIO_AF_4
* @arg @ref LL_GPIO_AF_5
* @arg @ref LL_GPIO_AF_6
* @arg @ref LL_GPIO_AF_7
*/
__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin)
{
return (uint32_t)(READ_BIT(GPIOx->AFR[0],
((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0)) / (((Pin * Pin) * Pin) * Pin));
}
/**
* @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
* @note Possible values are from AF0 to AF7 depending on target.
* @note Warning: only one pin can be passed as parameter.
* @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15
* @param GPIOx GPIO Port
* @param Pin This parameter can be one of the following values:
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @param Alternate This parameter can be one of the following values:
* @arg @ref LL_GPIO_AF_0
* @arg @ref LL_GPIO_AF_1
* @arg @ref LL_GPIO_AF_2
* @arg @ref LL_GPIO_AF_3
* @arg @ref LL_GPIO_AF_4
* @arg @ref LL_GPIO_AF_5
* @arg @ref LL_GPIO_AF_6
* @arg @ref LL_GPIO_AF_7
* @retval None
*/
__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
{
MODIFY_REG(GPIOx->AFR[1], (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8),
(((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * Alternate));
}
/**
* @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
* @note Possible values are from AF0 to AF7 depending on target.
* @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15
* @param GPIOx GPIO Port
* @param Pin This parameter can be one of the following values:
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @retval Returned value can be one of the following values:
* @arg @ref LL_GPIO_AF_0
* @arg @ref LL_GPIO_AF_1
* @arg @ref LL_GPIO_AF_2
* @arg @ref LL_GPIO_AF_3
* @arg @ref LL_GPIO_AF_4
* @arg @ref LL_GPIO_AF_5
* @arg @ref LL_GPIO_AF_6
* @arg @ref LL_GPIO_AF_7
*/
__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin)
{
return (uint32_t)(READ_BIT(GPIOx->AFR[1],
(((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8)) / ((((Pin >> 8U) *
(Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)));
}
/**
* @brief Lock configuration of several pins for a dedicated port.
* @note When the lock sequence has been applied on a port bit, the
* value of this port bit can no longer be modified until the
* next reset.
* @note Each lock bit freezes a specific configuration register
* (control and alternate function registers).
* @rmtoll LCKR LCKK LL_GPIO_LockPin
* @param GPIOx GPIO Port
* @param PinMask This parameter can be a combination of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @arg @ref LL_GPIO_PIN_ALL
* @retval None
*/
__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
{
__IO uint32_t temp;
WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
WRITE_REG(GPIOx->LCKR, PinMask);
WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
temp = READ_REG(GPIOx->LCKR);
(void) temp;
}
/**
* @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0.
* @rmtoll LCKR LCKy LL_GPIO_IsPinLocked
* @param GPIOx GPIO Port
* @param PinMask This parameter can be a combination of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @arg @ref LL_GPIO_PIN_ALL
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask)
{
return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask));
}
/**
* @brief Return 1 if one of the pin of a dedicated port is locked. else return 0.
* @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked
* @param GPIOx GPIO Port
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx)
{
return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK));
}
/**
* @}
*/
/** @defgroup GPIO_LL_EF_Data_Access Data Access
* @{
*/
/**
* @brief Return full input data register value for a dedicated port.
* @rmtoll IDR IDy LL_GPIO_ReadInputPort
* @param GPIOx GPIO Port
* @retval Input data register value of port
*/
__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx)
{
return (uint32_t)(READ_REG(GPIOx->IDR));
}
/**
* @brief Return if input data level for several pins of dedicated port is high or low.
* @rmtoll IDR IDy LL_GPIO_IsInputPinSet
* @param GPIOx GPIO Port
* @param PinMask This parameter can be a combination of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @arg @ref LL_GPIO_PIN_ALL
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
{
return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask));
}
/**
* @brief Write output data register for the port.
* @rmtoll ODR ODy LL_GPIO_WriteOutputPort
* @param GPIOx GPIO Port
* @param PortValue Level value for each pin of the port
* @retval None
*/
__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue)
{
WRITE_REG(GPIOx->ODR, PortValue);
}
/**
* @brief Return full output data register value for a dedicated port.
* @rmtoll ODR ODy LL_GPIO_ReadOutputPort
* @param GPIOx GPIO Port
* @retval Output data register value of port
*/
__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx)
{
return (uint32_t)(READ_REG(GPIOx->ODR));
}
/**
* @brief Return if input data level for several pins of dedicated port is high or low.
* @rmtoll ODR ODy LL_GPIO_IsOutputPinSet
* @param GPIOx GPIO Port
* @param PinMask This parameter can be a combination of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @arg @ref LL_GPIO_PIN_ALL
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
{
return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask));
}
/**
* @brief Set several pins to high level on dedicated gpio port.
* @rmtoll BSRR BSy LL_GPIO_SetOutputPin
* @param GPIOx GPIO Port
* @param PinMask This parameter can be a combination of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @arg @ref LL_GPIO_PIN_ALL
* @retval None
*/
__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
{
WRITE_REG(GPIOx->BSRR, PinMask);
}
/**
* @brief Set several pins to low level on dedicated gpio port.
* @rmtoll BRR BRy LL_GPIO_ResetOutputPin
* @param GPIOx GPIO Port
* @param PinMask This parameter can be a combination of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @arg @ref LL_GPIO_PIN_ALL
* @retval None
*/
__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
{
WRITE_REG(GPIOx->BRR, PinMask);
}
/**
* @brief Toggle data value for several pin of dedicated port.
* @rmtoll ODR ODy LL_GPIO_TogglePin
* @param GPIOx GPIO Port
* @param PinMask This parameter can be a combination of the following values:
* @arg @ref LL_GPIO_PIN_0
* @arg @ref LL_GPIO_PIN_1
* @arg @ref LL_GPIO_PIN_2
* @arg @ref LL_GPIO_PIN_3
* @arg @ref LL_GPIO_PIN_4
* @arg @ref LL_GPIO_PIN_5
* @arg @ref LL_GPIO_PIN_6
* @arg @ref LL_GPIO_PIN_7
* @arg @ref LL_GPIO_PIN_8
* @arg @ref LL_GPIO_PIN_9
* @arg @ref LL_GPIO_PIN_10
* @arg @ref LL_GPIO_PIN_11
* @arg @ref LL_GPIO_PIN_12
* @arg @ref LL_GPIO_PIN_13
* @arg @ref LL_GPIO_PIN_14
* @arg @ref LL_GPIO_PIN_15
* @arg @ref LL_GPIO_PIN_ALL
* @retval None
*/
__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
{
uint32_t odr = READ_REG(GPIOx->ODR);
WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask));
}
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions
* @{
*/
ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx);
ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct);
void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct);
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/**
* @}
*/
/**
* @}
*/
#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_LL_GPIO_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

552
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_pwr.h Normal file
View file

@ -0,0 +1,552 @@
/**
******************************************************************************
* @file stm32f0xx_ll_pwr.h
* @author MCD Application Team
* @brief Header file of PWR LL module.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_LL_PWR_H
#define __STM32F0xx_LL_PWR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
#if defined(PWR)
/** @defgroup PWR_LL PWR
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
* @{
*/
/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
* @brief Flags defines which can be used with LL_PWR_WriteReg function
* @{
*/
#define LL_PWR_CR_CSBF PWR_CR_CSBF /*!< Clear standby flag */
#define LL_PWR_CR_CWUF PWR_CR_CWUF /*!< Clear wakeup flag */
/**
* @}
*/
/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
* @brief Flags defines which can be used with LL_PWR_ReadReg function
* @{
*/
#define LL_PWR_CSR_WUF PWR_CSR_WUF /*!< Wakeup flag */
#define LL_PWR_CSR_SBF PWR_CSR_SBF /*!< Standby flag */
#if defined(PWR_PVD_SUPPORT)
#define LL_PWR_CSR_PVDO PWR_CSR_PVDO /*!< Power voltage detector output flag */
#endif /* PWR_PVD_SUPPORT */
#if defined(PWR_CSR_VREFINTRDYF)
#define LL_PWR_CSR_VREFINTRDYF PWR_CSR_VREFINTRDYF /*!< VREFINT ready flag */
#endif /* PWR_CSR_VREFINTRDYF */
#define LL_PWR_CSR_EWUP1 PWR_CSR_EWUP1 /*!< Enable WKUP pin 1 */
#define LL_PWR_CSR_EWUP2 PWR_CSR_EWUP2 /*!< Enable WKUP pin 2 */
#if defined(PWR_CSR_EWUP3)
#define LL_PWR_CSR_EWUP3 PWR_CSR_EWUP3 /*!< Enable WKUP pin 3 */
#endif /* PWR_CSR_EWUP3 */
#if defined(PWR_CSR_EWUP4)
#define LL_PWR_CSR_EWUP4 PWR_CSR_EWUP4 /*!< Enable WKUP pin 4 */
#endif /* PWR_CSR_EWUP4 */
#if defined(PWR_CSR_EWUP5)
#define LL_PWR_CSR_EWUP5 PWR_CSR_EWUP5 /*!< Enable WKUP pin 5 */
#endif /* PWR_CSR_EWUP5 */
#if defined(PWR_CSR_EWUP6)
#define LL_PWR_CSR_EWUP6 PWR_CSR_EWUP6 /*!< Enable WKUP pin 6 */
#endif /* PWR_CSR_EWUP6 */
#if defined(PWR_CSR_EWUP7)
#define LL_PWR_CSR_EWUP7 PWR_CSR_EWUP7 /*!< Enable WKUP pin 7 */
#endif /* PWR_CSR_EWUP7 */
#if defined(PWR_CSR_EWUP8)
#define LL_PWR_CSR_EWUP8 PWR_CSR_EWUP8 /*!< Enable WKUP pin 8 */
#endif /* PWR_CSR_EWUP8 */
/**
* @}
*/
/** @defgroup PWR_LL_EC_MODE_PWR Mode Power
* @{
*/
#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */
#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */
#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */
/**
* @}
*/
#if defined(PWR_CR_LPDS)
/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE Regulator Mode In Deep Sleep Mode
* @{
*/
#define LL_PWR_REGU_DSMODE_MAIN 0x00000000U /*!< Voltage Regulator in main mode during deepsleep mode */
#define LL_PWR_REGU_DSMODE_LOW_POWER (PWR_CR_LPDS) /*!< Voltage Regulator in low-power mode during deepsleep mode */
/**
* @}
*/
#endif /* PWR_CR_LPDS */
#if defined(PWR_PVD_SUPPORT)
/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level
* @{
*/
#define LL_PWR_PVDLEVEL_0 (PWR_CR_PLS_LEV0) /*!< Voltage threshold 0 */
#define LL_PWR_PVDLEVEL_1 (PWR_CR_PLS_LEV1) /*!< Voltage threshold 1 */
#define LL_PWR_PVDLEVEL_2 (PWR_CR_PLS_LEV2) /*!< Voltage threshold 2 */
#define LL_PWR_PVDLEVEL_3 (PWR_CR_PLS_LEV3) /*!< Voltage threshold 3 */
#define LL_PWR_PVDLEVEL_4 (PWR_CR_PLS_LEV4) /*!< Voltage threshold 4 */
#define LL_PWR_PVDLEVEL_5 (PWR_CR_PLS_LEV5) /*!< Voltage threshold 5 */
#define LL_PWR_PVDLEVEL_6 (PWR_CR_PLS_LEV6) /*!< Voltage threshold 6 */
#define LL_PWR_PVDLEVEL_7 (PWR_CR_PLS_LEV7) /*!< Voltage threshold 7 */
/**
* @}
*/
#endif /* PWR_PVD_SUPPORT */
/** @defgroup PWR_LL_EC_WAKEUP_PIN Wakeup Pins
* @{
*/
#define LL_PWR_WAKEUP_PIN1 (PWR_CSR_EWUP1) /*!< WKUP pin 1 : PA0 */
#define LL_PWR_WAKEUP_PIN2 (PWR_CSR_EWUP2) /*!< WKUP pin 2 : PC13 */
#if defined(PWR_CSR_EWUP3)
#define LL_PWR_WAKEUP_PIN3 (PWR_CSR_EWUP3) /*!< WKUP pin 3 : PE6 or PA2 according to device */
#endif /* PWR_CSR_EWUP3 */
#if defined(PWR_CSR_EWUP4)
#define LL_PWR_WAKEUP_PIN4 (PWR_CSR_EWUP4) /*!< WKUP pin 4 : LLG TBD */
#endif /* PWR_CSR_EWUP4 */
#if defined(PWR_CSR_EWUP5)
#define LL_PWR_WAKEUP_PIN5 (PWR_CSR_EWUP5) /*!< WKUP pin 5 : LLG TBD */
#endif /* PWR_CSR_EWUP5 */
#if defined(PWR_CSR_EWUP6)
#define LL_PWR_WAKEUP_PIN6 (PWR_CSR_EWUP6) /*!< WKUP pin 6 : LLG TBD */
#endif /* PWR_CSR_EWUP6 */
#if defined(PWR_CSR_EWUP7)
#define LL_PWR_WAKEUP_PIN7 (PWR_CSR_EWUP7) /*!< WKUP pin 7 : LLG TBD */
#endif /* PWR_CSR_EWUP7 */
#if defined(PWR_CSR_EWUP8)
#define LL_PWR_WAKEUP_PIN8 (PWR_CSR_EWUP8) /*!< WKUP pin 8 : LLG TBD */
#endif /* PWR_CSR_EWUP8 */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
* @{
*/
/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros
* @{
*/
/**
* @brief Write a value in PWR register
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))
/**
* @brief Read a value in PWR register
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
* @{
*/
/** @defgroup PWR_LL_EF_Configuration Configuration
* @{
*/
/**
* @brief Enable access to the backup domain
* @rmtoll CR DBP LL_PWR_EnableBkUpAccess
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
{
SET_BIT(PWR->CR, PWR_CR_DBP);
}
/**
* @brief Disable access to the backup domain
* @rmtoll CR DBP LL_PWR_DisableBkUpAccess
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
{
CLEAR_BIT(PWR->CR, PWR_CR_DBP);
}
/**
* @brief Check if the backup domain is enabled
* @rmtoll CR DBP LL_PWR_IsEnabledBkUpAccess
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
{
return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP));
}
#if defined(PWR_CR_LPDS)
/**
* @brief Set voltage Regulator mode during deep sleep mode
* @rmtoll CR LPDS LL_PWR_SetRegulModeDS
* @param RegulMode This parameter can be one of the following values:
* @arg @ref LL_PWR_REGU_DSMODE_MAIN
* @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
* @retval None
*/
__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode)
{
MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode);
}
/**
* @brief Get voltage Regulator mode during deep sleep mode
* @rmtoll CR LPDS LL_PWR_GetRegulModeDS
* @retval Returned value can be one of the following values:
* @arg @ref LL_PWR_REGU_DSMODE_MAIN
* @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
*/
__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void)
{
return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS));
}
#endif /* PWR_CR_LPDS */
/**
* @brief Set Power Down mode when CPU enters deepsleep
* @rmtoll CR PDDS LL_PWR_SetPowerMode\n
* @rmtoll CR LPDS LL_PWR_SetPowerMode
* @param PDMode This parameter can be one of the following values:
* @arg @ref LL_PWR_MODE_STOP_MAINREGU
* @arg @ref LL_PWR_MODE_STOP_LPREGU
* @arg @ref LL_PWR_MODE_STANDBY
* @retval None
*/
__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode)
{
MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode);
}
/**
* @brief Get Power Down mode when CPU enters deepsleep
* @rmtoll CR PDDS LL_PWR_GetPowerMode\n
* @rmtoll CR LPDS LL_PWR_GetPowerMode
* @retval Returned value can be one of the following values:
* @arg @ref LL_PWR_MODE_STOP_MAINREGU
* @arg @ref LL_PWR_MODE_STOP_LPREGU
* @arg @ref LL_PWR_MODE_STANDBY
*/
__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
{
return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS)));
}
#if defined(PWR_PVD_SUPPORT)
/**
* @brief Configure the voltage threshold detected by the Power Voltage Detector
* @rmtoll CR PLS LL_PWR_SetPVDLevel
* @param PVDLevel This parameter can be one of the following values:
* @arg @ref LL_PWR_PVDLEVEL_0
* @arg @ref LL_PWR_PVDLEVEL_1
* @arg @ref LL_PWR_PVDLEVEL_2
* @arg @ref LL_PWR_PVDLEVEL_3
* @arg @ref LL_PWR_PVDLEVEL_4
* @arg @ref LL_PWR_PVDLEVEL_5
* @arg @ref LL_PWR_PVDLEVEL_6
* @arg @ref LL_PWR_PVDLEVEL_7
* @retval None
*/
__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel)
{
MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel);
}
/**
* @brief Get the voltage threshold detection
* @rmtoll CR PLS LL_PWR_GetPVDLevel
* @retval Returned value can be one of the following values:
* @arg @ref LL_PWR_PVDLEVEL_0
* @arg @ref LL_PWR_PVDLEVEL_1
* @arg @ref LL_PWR_PVDLEVEL_2
* @arg @ref LL_PWR_PVDLEVEL_3
* @arg @ref LL_PWR_PVDLEVEL_4
* @arg @ref LL_PWR_PVDLEVEL_5
* @arg @ref LL_PWR_PVDLEVEL_6
* @arg @ref LL_PWR_PVDLEVEL_7
*/
__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void)
{
return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS));
}
/**
* @brief Enable Power Voltage Detector
* @rmtoll CR PVDE LL_PWR_EnablePVD
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnablePVD(void)
{
SET_BIT(PWR->CR, PWR_CR_PVDE);
}
/**
* @brief Disable Power Voltage Detector
* @rmtoll CR PVDE LL_PWR_DisablePVD
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisablePVD(void)
{
CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
}
/**
* @brief Check if Power Voltage Detector is enabled
* @rmtoll CR PVDE LL_PWR_IsEnabledPVD
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
{
return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE));
}
#endif /* PWR_PVD_SUPPORT */
/**
* @brief Enable the WakeUp PINx functionality
* @rmtoll CSR EWUP1 LL_PWR_EnableWakeUpPin\n
* @rmtoll CSR EWUP2 LL_PWR_EnableWakeUpPin\n
* @rmtoll CSR EWUP3 LL_PWR_EnableWakeUpPin\n
* @rmtoll CSR EWUP4 LL_PWR_EnableWakeUpPin\n
* @rmtoll CSR EWUP5 LL_PWR_EnableWakeUpPin\n
* @rmtoll CSR EWUP6 LL_PWR_EnableWakeUpPin\n
* @rmtoll CSR EWUP7 LL_PWR_EnableWakeUpPin\n
* @rmtoll CSR EWUP8 LL_PWR_EnableWakeUpPin
* @param WakeUpPin This parameter can be one of the following values:
* @arg @ref LL_PWR_WAKEUP_PIN1
* @arg @ref LL_PWR_WAKEUP_PIN2
* @arg @ref LL_PWR_WAKEUP_PIN3 (*)
* @arg @ref LL_PWR_WAKEUP_PIN4 (*)
* @arg @ref LL_PWR_WAKEUP_PIN5 (*)
* @arg @ref LL_PWR_WAKEUP_PIN6 (*)
* @arg @ref LL_PWR_WAKEUP_PIN7 (*)
* @arg @ref LL_PWR_WAKEUP_PIN8 (*)
*
* (*) not available on all devices
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
{
SET_BIT(PWR->CSR, WakeUpPin);
}
/**
* @brief Disable the WakeUp PINx functionality
* @rmtoll CSR EWUP1 LL_PWR_DisableWakeUpPin\n
* @rmtoll CSR EWUP2 LL_PWR_DisableWakeUpPin\n
* @rmtoll CSR EWUP3 LL_PWR_DisableWakeUpPin\n
* @rmtoll CSR EWUP4 LL_PWR_DisableWakeUpPin\n
* @rmtoll CSR EWUP5 LL_PWR_DisableWakeUpPin\n
* @rmtoll CSR EWUP6 LL_PWR_DisableWakeUpPin\n
* @rmtoll CSR EWUP7 LL_PWR_DisableWakeUpPin\n
* @rmtoll CSR EWUP8 LL_PWR_DisableWakeUpPin
* @param WakeUpPin This parameter can be one of the following values:
* @arg @ref LL_PWR_WAKEUP_PIN1
* @arg @ref LL_PWR_WAKEUP_PIN2
* @arg @ref LL_PWR_WAKEUP_PIN3 (*)
* @arg @ref LL_PWR_WAKEUP_PIN4 (*)
* @arg @ref LL_PWR_WAKEUP_PIN5 (*)
* @arg @ref LL_PWR_WAKEUP_PIN6 (*)
* @arg @ref LL_PWR_WAKEUP_PIN7 (*)
* @arg @ref LL_PWR_WAKEUP_PIN8 (*)
*
* (*) not available on all devices
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
{
CLEAR_BIT(PWR->CSR, WakeUpPin);
}
/**
* @brief Check if the WakeUp PINx functionality is enabled
* @rmtoll CSR EWUP1 LL_PWR_IsEnabledWakeUpPin\n
* @rmtoll CSR EWUP2 LL_PWR_IsEnabledWakeUpPin\n
* @rmtoll CSR EWUP3 LL_PWR_IsEnabledWakeUpPin\n
* @rmtoll CSR EWUP4 LL_PWR_IsEnabledWakeUpPin\n
* @rmtoll CSR EWUP5 LL_PWR_IsEnabledWakeUpPin\n
* @rmtoll CSR EWUP6 LL_PWR_IsEnabledWakeUpPin\n
* @rmtoll CSR EWUP7 LL_PWR_IsEnabledWakeUpPin\n
* @rmtoll CSR EWUP8 LL_PWR_IsEnabledWakeUpPin
* @param WakeUpPin This parameter can be one of the following values:
* @arg @ref LL_PWR_WAKEUP_PIN1
* @arg @ref LL_PWR_WAKEUP_PIN2
* @arg @ref LL_PWR_WAKEUP_PIN3 (*)
* @arg @ref LL_PWR_WAKEUP_PIN4 (*)
* @arg @ref LL_PWR_WAKEUP_PIN5 (*)
* @arg @ref LL_PWR_WAKEUP_PIN6 (*)
* @arg @ref LL_PWR_WAKEUP_PIN7 (*)
* @arg @ref LL_PWR_WAKEUP_PIN8 (*)
*
* (*) not available on all devices
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
{
return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin));
}
/**
* @}
*/
/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
* @{
*/
/**
* @brief Get Wake-up Flag
* @rmtoll CSR WUF LL_PWR_IsActiveFlag_WU
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void)
{
return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF));
}
/**
* @brief Get Standby Flag
* @rmtoll CSR SBF LL_PWR_IsActiveFlag_SB
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
{
return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF));
}
#if defined(PWR_PVD_SUPPORT)
/**
* @brief Indicate whether VDD voltage is below the selected PVD threshold
* @rmtoll CSR PVDO LL_PWR_IsActiveFlag_PVDO
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
{
return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO));
}
#endif /* PWR_PVD_SUPPORT */
#if defined(PWR_CSR_VREFINTRDYF)
/**
* @brief Get Internal Reference VrefInt Flag
* @rmtoll CSR VREFINTRDYF LL_PWR_IsActiveFlag_VREFINTRDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VREFINTRDY(void)
{
return (READ_BIT(PWR->CSR, PWR_CSR_VREFINTRDYF) == (PWR_CSR_VREFINTRDYF));
}
#endif /* PWR_CSR_VREFINTRDYF */
/**
* @brief Clear Standby Flag
* @rmtoll CR CSBF LL_PWR_ClearFlag_SB
* @retval None
*/
__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
{
SET_BIT(PWR->CR, PWR_CR_CSBF);
}
/**
* @brief Clear Wake-up Flags
* @rmtoll CR CWUF LL_PWR_ClearFlag_WU
* @retval None
*/
__STATIC_INLINE void LL_PWR_ClearFlag_WU(void)
{
SET_BIT(PWR->CR, PWR_CR_CWUF);
}
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup PWR_LL_EF_Init De-initialization function
* @{
*/
ErrorStatus LL_PWR_DeInit(void);
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/**
* @}
*/
/**
* @}
*/
#endif /* defined(PWR) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_LL_PWR_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

2261
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_rcc.h Normal file
View file

File diff suppressed because it is too large Load diff

1852
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_system.h Normal file
View file

File diff suppressed because it is too large Load diff

274
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_ll_utils.h Normal file
View file

@ -0,0 +1,274 @@
/**
******************************************************************************
* @file stm32f0xx_ll_utils.h
* @author MCD Application Team
* @brief Header file of UTILS LL module.
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The LL UTILS driver contains a set of generic APIs that can be
used by user:
(+) Device electronic signature
(+) Timing functions
(+) PLL configuration functions
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_LL_UTILS_H
#define __STM32F0xx_LL_UTILS_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
/** @defgroup UTILS_LL UTILS
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants
* @{
*/
/* Max delay can be used in LL_mDelay */
#define LL_MAX_DELAY 0xFFFFFFFFU
/**
* @brief Unique device ID register base address
*/
#define UID_BASE_ADDRESS UID_BASE
/**
* @brief Flash size data register base address
*/
#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros
* @{
*/
/**
* @}
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures
* @{
*/
/**
* @brief UTILS PLL structure definition
*/
typedef struct
{
uint32_t PLLMul; /*!< Multiplication factor for PLL VCO input clock.
This parameter can be a value of @ref RCC_LL_EC_PLL_MUL
This feature can be modified afterwards using unitary function
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
uint32_t PLLDiv; /*!< Division factor for PLL VCO output clock.
This parameter can be a value of @ref RCC_LL_EC_PREDIV_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
#else
uint32_t Prediv; /*!< Division factor for HSE used as PLL clock source.
This parameter can be a value of @ref RCC_LL_EC_PREDIV_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_PLL_ConfigDomain_SYS(). */
#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
} LL_UTILS_PLLInitTypeDef;
/**
* @brief UTILS System, AHB and APB buses clock configuration structure definition
*/
typedef struct
{
uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_SetAHBPrescaler(). */
uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
This parameter can be a value of @ref RCC_LL_EC_APB1_DIV
This feature can be modified afterwards using unitary function
@ref LL_RCC_SetAPB1Prescaler(). */
} LL_UTILS_ClkInitTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants
* @{
*/
/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation
* @{
*/
#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */
#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions
* @{
*/
/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE
* @{
*/
/**
* @brief Get Word0 of the unique device identifier (UID based on 96 bits)
* @retval UID[31:0]: X and Y coordinates on the wafer expressed in BCD format
*/
__STATIC_INLINE uint32_t LL_GetUID_Word0(void)
{
return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS)));
}
/**
* @brief Get Word1 of the unique device identifier (UID based on 96 bits)
* @retval UID[63:32]: Wafer number (UID[39:32]) & LOT_NUM[23:0] (UID[63:40])
*/
__STATIC_INLINE uint32_t LL_GetUID_Word1(void)
{
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U))));
}
/**
* @brief Get Word2 of the unique device identifier (UID based on 96 bits)
* @retval UID[95:64]: Lot number (ASCII encoded) - LOT_NUM[55:24]
*/
__STATIC_INLINE uint32_t LL_GetUID_Word2(void)
{
return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 8U))));
}
/**
* @brief Get Flash memory size
* @note This bitfield indicates the size of the device Flash memory expressed in
* Kbytes. As an example, 0x040 corresponds to 64 Kbytes.
* @retval FLASH_SIZE[15:0]: Flash memory size
*/
__STATIC_INLINE uint32_t LL_GetFlashSize(void)
{
return (uint16_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)));
}
/**
* @}
*/
/** @defgroup UTILS_LL_EF_DELAY DELAY
* @{
*/
/**
* @brief This function configures the Cortex-M SysTick source of the time base.
* @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
* @note When a RTOS is used, it is recommended to avoid changing the SysTick
* configuration by calling this function, for a delay use rather osDelay RTOS service.
* @param Ticks Number of ticks
* @retval None
*/
__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks)
{
/* Configure the SysTick to have interrupt in 1ms time base */
SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable the Systick Timer */
}
void LL_Init1msTick(uint32_t HCLKFrequency);
void LL_mDelay(uint32_t Delay);
/**
* @}
*/
/** @defgroup UTILS_EF_SYSTEM SYSTEM
* @{
*/
void LL_SetSystemCoreClock(uint32_t HCLKFrequency);
#if defined(FLASH_ACR_LATENCY)
ErrorStatus LL_SetFlashLatency(uint32_t Frequency);
#endif /* FLASH_ACR_LATENCY */
ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
#if defined(RCC_CFGR_SW_HSI48)
ErrorStatus LL_PLL_ConfigSystemClock_HSI48(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
#endif /*RCC_CFGR_SW_HSI48*/
ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_LL_UTILS_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

3
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/License.md Normal file
View file

@ -0,0 +1,3 @@
# Copyright (c) 2016 STMicroelectronics
This software component is licensed by STMicroelectronics under the **BSD 3-Clause** license. You may not use this file except in compliance with this license. You may obtain a copy of the license [here](https://opensource.org/licenses/BSD-3-Clause).

223
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_exti.c Normal file
View file

@ -0,0 +1,223 @@
/**
******************************************************************************
* @file stm32f0xx_ll_exti.c
* @author MCD Application Team
* @brief EXTI LL module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
#if defined(USE_FULL_LL_DRIVER)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_ll_exti.h"
#ifdef USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
#if defined (EXTI)
/** @defgroup EXTI_LL EXTI
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup EXTI_LL_Private_Macros
* @{
*/
#define IS_LL_EXTI_LINE_0_31(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U)
#define IS_LL_EXTI_MODE(__VALUE__) (((__VALUE__) == LL_EXTI_MODE_IT) \
|| ((__VALUE__) == LL_EXTI_MODE_EVENT) \
|| ((__VALUE__) == LL_EXTI_MODE_IT_EVENT))
#define IS_LL_EXTI_TRIGGER(__VALUE__) (((__VALUE__) == LL_EXTI_TRIGGER_NONE) \
|| ((__VALUE__) == LL_EXTI_TRIGGER_RISING) \
|| ((__VALUE__) == LL_EXTI_TRIGGER_FALLING) \
|| ((__VALUE__) == LL_EXTI_TRIGGER_RISING_FALLING))
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup EXTI_LL_Exported_Functions
* @{
*/
/** @addtogroup EXTI_LL_EF_Init
* @{
*/
/**
* @brief De-initialize the EXTI registers to their default reset values.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: EXTI registers are de-initialized
* - ERROR: not applicable
*/
uint32_t LL_EXTI_DeInit(void)
{
/* Interrupt mask register set to default reset values */
#if defined(STM32F030x6) || defined(STM32F031x6) ||defined(STM32F038xx)
LL_EXTI_WriteReg(IMR, 0x0FF40000U);
#elif defined(STM32F070x6) || defined(STM32F042x6) || defined(STM32F048xx)
LL_EXTI_WriteReg(IMR, 0x7FF40000U);
#elif defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
LL_EXTI_WriteReg(IMR, 0x0F940000U);
#else
LL_EXTI_WriteReg(IMR, 0x7F840000U);
#endif
/* Event mask register set to default reset values */
LL_EXTI_WriteReg(EMR, 0x00000000U);
/* Rising Trigger selection register set to default reset values */
LL_EXTI_WriteReg(RTSR, 0x00000000U);
/* Falling Trigger selection register set to default reset values */
LL_EXTI_WriteReg(FTSR, 0x00000000U);
/* Software interrupt event register set to default reset values */
LL_EXTI_WriteReg(SWIER, 0x00000000U);
/* Pending register clear */
LL_EXTI_WriteReg(PR, 0x007BFFFFU);
return SUCCESS;
}
/**
* @brief Initialize the EXTI registers according to the specified parameters in EXTI_InitStruct.
* @param EXTI_InitStruct pointer to a @ref LL_EXTI_InitTypeDef structure.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: EXTI registers are initialized
* - ERROR: not applicable
*/
uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct)
{
ErrorStatus status = SUCCESS;
/* Check the parameters */
assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31));
assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand));
assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode));
/* ENABLE LineCommand */
if (EXTI_InitStruct->LineCommand != DISABLE)
{
assert_param(IS_LL_EXTI_TRIGGER(EXTI_InitStruct->Trigger));
/* Configure EXTI Lines in range from 0 to 31 */
if (EXTI_InitStruct->Line_0_31 != LL_EXTI_LINE_NONE)
{
switch (EXTI_InitStruct->Mode)
{
case LL_EXTI_MODE_IT:
/* First Disable Event on provided Lines */
LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
/* Then Enable IT on provided Lines */
LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
break;
case LL_EXTI_MODE_EVENT:
/* First Disable IT on provided Lines */
LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
/* Then Enable Event on provided Lines */
LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
break;
case LL_EXTI_MODE_IT_EVENT:
/* Directly Enable IT & Event on provided Lines */
LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
break;
default:
status = ERROR;
break;
}
if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE)
{
switch (EXTI_InitStruct->Trigger)
{
case LL_EXTI_TRIGGER_RISING:
/* First Disable Falling Trigger on provided Lines */
LL_EXTI_DisableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
/* Then Enable Rising Trigger on provided Lines */
LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
break;
case LL_EXTI_TRIGGER_FALLING:
/* First Disable Rising Trigger on provided Lines */
LL_EXTI_DisableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
/* Then Enable Falling Trigger on provided Lines */
LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
break;
case LL_EXTI_TRIGGER_RISING_FALLING:
LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
break;
default:
status = ERROR;
break;
}
}
}
}
/* DISABLE LineCommand */
else
{
/* De-configure EXTI Lines in range from 0 to 31 */
LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
}
return status;
}
/**
* @brief Set each @ref LL_EXTI_InitTypeDef field to default value.
* @param EXTI_InitStruct Pointer to a @ref LL_EXTI_InitTypeDef structure.
* @retval None
*/
void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct)
{
EXTI_InitStruct->Line_0_31 = LL_EXTI_LINE_NONE;
EXTI_InitStruct->LineCommand = DISABLE;
EXTI_InitStruct->Mode = LL_EXTI_MODE_IT;
EXTI_InitStruct->Trigger = LL_EXTI_TRIGGER_FALLING;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined (EXTI) */
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

277
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_gpio.c Normal file
View file

@ -0,0 +1,277 @@
/**
******************************************************************************
* @file stm32f0xx_ll_gpio.c
* @author MCD Application Team
* @brief GPIO LL module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
#if defined(USE_FULL_LL_DRIVER)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_ll_gpio.h"
#include "stm32f0xx_ll_bus.h"
#ifdef USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF)
/** @addtogroup GPIO_LL
* @{
*/
/** MISRA C:2012 deviation rule has been granted for following rules:
* Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of
* range of the shift operator in following API :
* LL_GPIO_Init
* LL_GPIO_DeInit
* LL_GPIO_SetPinMode
* LL_GPIO_GetPinMode
* LL_GPIO_SetPinSpeed
* LL_GPIO_GetPinSpeed
* LL_GPIO_SetPinPull
* LL_GPIO_GetPinPull
* LL_GPIO_GetAFPin_0_7
* LL_GPIO_SetAFPin_0_7
* LL_GPIO_SetAFPin_8_15
* LL_GPIO_GetAFPin_8_15
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup GPIO_LL_Private_Macros
* @{
*/
#define IS_LL_GPIO_PIN(__VALUE__) (((0x00u) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL)))
#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_INPUT) ||\
((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\
((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\
((__VALUE__) == LL_GPIO_MODE_ANALOG))
#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\
((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN))
#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\
((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\
((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH))
#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_NO) ||\
((__VALUE__) == LL_GPIO_PULL_UP) ||\
((__VALUE__) == LL_GPIO_PULL_DOWN))
#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\
((__VALUE__) == LL_GPIO_AF_1 ) ||\
((__VALUE__) == LL_GPIO_AF_2 ) ||\
((__VALUE__) == LL_GPIO_AF_3 ) ||\
((__VALUE__) == LL_GPIO_AF_4 ) ||\
((__VALUE__) == LL_GPIO_AF_5 ) ||\
((__VALUE__) == LL_GPIO_AF_6 ) ||\
((__VALUE__) == LL_GPIO_AF_7 ))
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup GPIO_LL_Exported_Functions
* @{
*/
/** @addtogroup GPIO_LL_EF_Init
* @{
*/
/**
* @brief De-initialize GPIO registers (Registers restored to their default values).
* @param GPIOx GPIO Port
* @retval An ErrorStatus enumeration value:
* - SUCCESS: GPIO registers are de-initialized
* - ERROR: Wrong GPIO Port
*/
ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx)
{
ErrorStatus status = SUCCESS;
/* Check the parameters */
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
/* Force and Release reset on clock of GPIOx Port */
if (GPIOx == GPIOA)
{
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOA);
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOA);
}
else if (GPIOx == GPIOB)
{
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOB);
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOB);
}
else if (GPIOx == GPIOC)
{
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOC);
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOC);
}
#if defined(GPIOD)
else if (GPIOx == GPIOD)
{
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOD);
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOD);
}
#endif /* GPIOD */
#if defined(GPIOE)
else if (GPIOx == GPIOE)
{
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOE);
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOE);
}
#endif /* GPIOE */
#if defined(GPIOF)
else if (GPIOx == GPIOF)
{
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOF);
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOF);
}
#endif /* GPIOF */
else
{
status = ERROR;
}
return (status);
}
/**
* @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct.
* @param GPIOx GPIO Port
* @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure
* that contains the configuration information for the specified GPIO peripheral.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content
* - ERROR: Not applicable
*/
ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct)
{
uint32_t pinpos;
uint32_t currentpin;
/* Check the parameters */
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin));
assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode));
assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull));
/* ------------------------- Configure the port pins ---------------- */
/* Initialize pinpos on first pin set */
pinpos = 0;
/* Configure the port pins */
while (((GPIO_InitStruct->Pin) >> pinpos) != 0x00u)
{
/* Get current io position */
currentpin = (GPIO_InitStruct->Pin) & (0x00000001uL << pinpos);
if (currentpin != 0x00u)
{
if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
{
/* Check Speed mode parameters */
assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed));
/* Speed mode configuration */
LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed);
/* Check Output mode parameters */
assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType));
/* Output mode configuration*/
LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType);
}
/* Pull-up Pull down resistor configuration*/
LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull);
if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)
{
/* Check Alternate parameter */
assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate));
/* Speed mode configuration */
if (currentpin < LL_GPIO_PIN_8)
{
LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate);
}
else
{
LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate);
}
}
/* Pin Mode configuration */
LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode);
}
pinpos++;
}
return (SUCCESS);
}
/**
* @brief Set each @ref LL_GPIO_InitTypeDef field to default value.
* @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure
* whose fields will be set to default values.
* @retval None
*/
void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct)
{
/* Reset GPIO init structure parameters values */
GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL;
GPIO_InitStruct->Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct->Pull = LL_GPIO_PULL_NO;
GPIO_InitStruct->Alternate = LL_GPIO_AF_0;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

86
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_pwr.c Normal file
View file

@ -0,0 +1,86 @@
/**
******************************************************************************
* @file stm32f0xx_ll_pwr.c
* @author MCD Application Team
* @brief PWR LL module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
#if defined(USE_FULL_LL_DRIVER)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_ll_pwr.h"
#include "stm32f0xx_ll_bus.h"
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
#if defined(PWR)
/** @defgroup PWR_LL PWR
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PWR_LL_Exported_Functions
* @{
*/
/** @addtogroup PWR_LL_EF_Init
* @{
*/
/**
* @brief De-initialize the PWR registers to their default reset values.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: PWR registers are de-initialized
* - ERROR: not applicable
*/
ErrorStatus LL_PWR_DeInit(void)
{
/* Force reset of PWR clock */
LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_PWR);
/* Release reset of PWR clock */
LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_PWR);
return SUCCESS;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined(PWR) */
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

609
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_rcc.c Normal file
View file

@ -0,0 +1,609 @@
/**
******************************************************************************
* @file stm32f0xx_ll_rcc.c
* @author MCD Application Team
* @brief RCC LL module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
#if defined(USE_FULL_LL_DRIVER)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_ll_rcc.h"
#ifdef USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
#if defined(RCC)
/** @defgroup RCC_LL RCC
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup RCC_LL_Private_Macros
* @{
*/
#if defined(RCC_CFGR3_USART2SW) && defined(RCC_CFGR3_USART3SW)
#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \
|| ((__VALUE__) == LL_RCC_USART2_CLKSOURCE) \
|| ((__VALUE__) == LL_RCC_USART3_CLKSOURCE))
#elif defined(RCC_CFGR3_USART2SW) && !defined(RCC_CFGR3_USART3SW)
#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \
|| ((__VALUE__) == LL_RCC_USART2_CLKSOURCE))
#elif defined(RCC_CFGR3_USART3SW) && !defined(RCC_CFGR3_USART2SW)
#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \
|| ((__VALUE__) == LL_RCC_USART3_CLKSOURCE))
#else
#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE))
#endif /* RCC_CFGR3_USART2SW && RCC_CFGR3_USART3SW */
#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2C1_CLKSOURCE)
#if defined(USB)
#define IS_LL_RCC_USB_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USB_CLKSOURCE))
#endif /* USB */
#if defined(CEC)
#define IS_LL_RCC_CEC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_CEC_CLKSOURCE))
#endif /* CEC */
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup RCC_LL_Private_Functions RCC Private functions
* @{
*/
uint32_t RCC_GetSystemClockFreq(void);
uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency);
uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency);
uint32_t RCC_PLL_GetFreqDomain_SYS(void);
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup RCC_LL_Exported_Functions
* @{
*/
/** @addtogroup RCC_LL_EF_Init
* @{
*/
/**
* @brief Reset the RCC clock configuration to the default reset state.
* @note The default reset state of the clock configuration is given below:
* - HSI ON and used as system clock source
* - HSE and PLL OFF
* - AHB and APB1 prescaler set to 1.
* - CSS, MCO OFF
* - All interrupts disabled
* @note This function doesn't modify the configuration of the
* - Peripheral clocks
* - LSI, LSE and RTC clocks
* @retval An ErrorStatus enumeration value:
* - SUCCESS: RCC registers are de-initialized
* - ERROR: not applicable
*/
ErrorStatus LL_RCC_DeInit(void)
{
__IO uint32_t vl_mask;
/* Set HSION bit */
LL_RCC_HSI_Enable();
/* Wait for HSI READY bit */
while(LL_RCC_HSI_IsReady() != 1U)
{}
/* Set HSITRIM bits to the reset value*/
LL_RCC_HSI_SetCalibTrimming(0x10U);
/* Reset SW, HPRE, PPRE and MCOSEL bits */
vl_mask = 0xFFFFFFFFU;
CLEAR_BIT(vl_mask, (RCC_CFGR_SW | RCC_CFGR_HPRE | RCC_CFGR_PPRE | RCC_CFGR_MCOSEL));
/* Write new value in CFGR register */
LL_RCC_WriteReg(CFGR, vl_mask);
/* Wait till system clock source is ready */
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI)
{}
/* Read CR register */
vl_mask = LL_RCC_ReadReg(CR);
/* Reset HSEON, CSSON, PLLON bits */
CLEAR_BIT(vl_mask, (RCC_CR_PLLON | RCC_CR_CSSON | RCC_CR_HSEON));
/* Write new value in CR register */
LL_RCC_WriteReg(CR, vl_mask);
/* Wait for PLL READY bit to be reset */
while(LL_RCC_PLL_IsReady() != 0U)
{}
/* Reset HSEBYP bit */
LL_RCC_HSE_DisableBypass();
/* Reset CFGR register */
LL_RCC_WriteReg(CFGR, 0x00000000U);
#if defined(RCC_HSI48_SUPPORT)
/* Reset CR2 register */
LL_RCC_WriteReg(CR2, 0x00000000U);
/* Disable HSI48 */
LL_RCC_HSI48_Disable();
#endif /*RCC_HSI48_SUPPORT*/
/* Set HSI14TRIM/HSI14ON/HSI14DIS bits to the reset value*/
LL_RCC_HSI14_SetCalibTrimming(0x10U);
LL_RCC_HSI14_Disable();
LL_RCC_HSI14_EnableADCControl();
/* Reset CFGR2 register */
LL_RCC_WriteReg(CFGR2, 0x00000000U);
/* Reset CFGR3 register */
LL_RCC_WriteReg(CFGR3, 0x00000000U);
/* Clear pending flags */
#if defined(RCC_HSI48_SUPPORT)
vl_mask = (LL_RCC_CIR_LSIRDYC | LL_RCC_CIR_LSERDYC | LL_RCC_CIR_HSIRDYC | LL_RCC_CIR_HSERDYC |\
LL_RCC_CIR_PLLRDYC | LL_RCC_CIR_HSI14RDYC | LL_RCC_CIR_HSI48RDYC | LL_RCC_CIR_CSSC);
#else
vl_mask = (LL_RCC_CIR_LSIRDYC | LL_RCC_CIR_LSERDYC | LL_RCC_CIR_HSIRDYC | LL_RCC_CIR_HSERDYC |\
LL_RCC_CIR_PLLRDYC | LL_RCC_CIR_HSI14RDYC | LL_RCC_CIR_CSSC);
#endif /* RCC_HSI48_SUPPORT */
/* Write new value in CIR register */
LL_RCC_WriteReg(CIR, vl_mask);
/* Disable all interrupts */
LL_RCC_WriteReg(CIR, 0x00000000U);
/* Clear reset flags */
LL_RCC_ClearResetFlags();
return SUCCESS;
}
/**
* @}
*/
/** @addtogroup RCC_LL_EF_Get_Freq
* @brief Return the frequencies of different on chip clocks; System, AHB and APB1 buses clocks
* and different peripheral clocks available on the device.
* @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(**)
* @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***)
* @note If SYSCLK source is PLL, function returns values based on
* HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors.
* @note (**) HSI_VALUE is a defined constant but the real value may vary
* depending on the variations in voltage and temperature.
* @note (***) HSE_VALUE is a defined constant, user has to ensure that
* HSE_VALUE is same as the real frequency of the crystal used.
* Otherwise, this function may have wrong result.
* @note The result of this function could be incorrect when using fractional
* value for HSE crystal.
* @note This function can be used by the user application to compute the
* baud-rate for the communication peripherals or configure other parameters.
* @{
*/
/**
* @brief Return the frequencies of different on chip clocks; System, AHB and APB1 buses clocks
* @note Each time SYSCLK, HCLK and/or PCLK1 clock changes, this function
* must be called to update structure fields. Otherwise, any
* configuration based on this function will be incorrect.
* @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies
* @retval None
*/
void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks)
{
/* Get SYSCLK frequency */
RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq();
/* HCLK clock frequency */
RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency);
/* PCLK1 clock frequency */
RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency);
}
/**
* @brief Return USARTx clock frequency
* @param USARTxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_USART1_CLKSOURCE
* @arg @ref LL_RCC_USART2_CLKSOURCE (*)
* @arg @ref LL_RCC_USART3_CLKSOURCE (*)
*
* (*) value not defined in all devices.
* @retval USART clock frequency (in Hz)
* @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready
*/
uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource)
{
uint32_t usart_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
/* Check parameter */
assert_param(IS_LL_RCC_USART_CLKSOURCE(USARTxSource));
#if defined(RCC_CFGR3_USART1SW)
if (USARTxSource == LL_RCC_USART1_CLKSOURCE)
{
/* USART1CLK clock frequency */
switch (LL_RCC_GetUSARTClockSource(USARTxSource))
{
case LL_RCC_USART1_CLKSOURCE_SYSCLK: /* USART1 Clock is System Clock */
usart_frequency = RCC_GetSystemClockFreq();
break;
case LL_RCC_USART1_CLKSOURCE_HSI: /* USART1 Clock is HSI Osc. */
if (LL_RCC_HSI_IsReady())
{
usart_frequency = HSI_VALUE;
}
break;
case LL_RCC_USART1_CLKSOURCE_LSE: /* USART1 Clock is LSE Osc. */
if (LL_RCC_LSE_IsReady())
{
usart_frequency = LSE_VALUE;
}
break;
case LL_RCC_USART1_CLKSOURCE_PCLK1: /* USART1 Clock is PCLK1 */
default:
usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
break;
}
}
#endif /* RCC_CFGR3_USART1SW */
#if defined(RCC_CFGR3_USART2SW)
if (USARTxSource == LL_RCC_USART2_CLKSOURCE)
{
/* USART2CLK clock frequency */
switch (LL_RCC_GetUSARTClockSource(USARTxSource))
{
case LL_RCC_USART2_CLKSOURCE_SYSCLK: /* USART2 Clock is System Clock */
usart_frequency = RCC_GetSystemClockFreq();
break;
case LL_RCC_USART2_CLKSOURCE_HSI: /* USART2 Clock is HSI Osc. */
if (LL_RCC_HSI_IsReady())
{
usart_frequency = HSI_VALUE;
}
break;
case LL_RCC_USART2_CLKSOURCE_LSE: /* USART2 Clock is LSE Osc. */
if (LL_RCC_LSE_IsReady())
{
usart_frequency = LSE_VALUE;
}
break;
case LL_RCC_USART2_CLKSOURCE_PCLK1: /* USART2 Clock is PCLK1 */
default:
usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
break;
}
}
#endif /* RCC_CFGR3_USART2SW */
#if defined(RCC_CFGR3_USART3SW)
if (USARTxSource == LL_RCC_USART3_CLKSOURCE)
{
/* USART3CLK clock frequency */
switch (LL_RCC_GetUSARTClockSource(USARTxSource))
{
case LL_RCC_USART3_CLKSOURCE_SYSCLK: /* USART3 Clock is System Clock */
usart_frequency = RCC_GetSystemClockFreq();
break;
case LL_RCC_USART3_CLKSOURCE_HSI: /* USART3 Clock is HSI Osc. */
if (LL_RCC_HSI_IsReady())
{
usart_frequency = HSI_VALUE;
}
break;
case LL_RCC_USART3_CLKSOURCE_LSE: /* USART3 Clock is LSE Osc. */
if (LL_RCC_LSE_IsReady())
{
usart_frequency = LSE_VALUE;
}
break;
case LL_RCC_USART3_CLKSOURCE_PCLK1: /* USART3 Clock is PCLK1 */
default:
usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
break;
}
}
#endif /* RCC_CFGR3_USART3SW */
return usart_frequency;
}
/**
* @brief Return I2Cx clock frequency
* @param I2CxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_I2C1_CLKSOURCE
* @retval I2C clock frequency (in Hz)
* @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that HSI oscillator is not ready
*/
uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource)
{
uint32_t i2c_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
/* Check parameter */
assert_param(IS_LL_RCC_I2C_CLKSOURCE(I2CxSource));
/* I2C1 CLK clock frequency */
if (I2CxSource == LL_RCC_I2C1_CLKSOURCE)
{
switch (LL_RCC_GetI2CClockSource(I2CxSource))
{
case LL_RCC_I2C1_CLKSOURCE_SYSCLK: /* I2C1 Clock is System Clock */
i2c_frequency = RCC_GetSystemClockFreq();
break;
case LL_RCC_I2C1_CLKSOURCE_HSI: /* I2C1 Clock is HSI Osc. */
default:
if (LL_RCC_HSI_IsReady())
{
i2c_frequency = HSI_VALUE;
}
break;
}
}
return i2c_frequency;
}
#if defined(USB)
/**
* @brief Return USBx clock frequency
* @param USBxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_USB_CLKSOURCE
* @retval USB clock frequency (in Hz)
* @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI48) or PLL is not ready
* @arg @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected
*/
uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource)
{
uint32_t usb_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
/* Check parameter */
assert_param(IS_LL_RCC_USB_CLKSOURCE(USBxSource));
/* USBCLK clock frequency */
switch (LL_RCC_GetUSBClockSource(USBxSource))
{
case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */
if (LL_RCC_PLL_IsReady())
{
usb_frequency = RCC_PLL_GetFreqDomain_SYS();
}
break;
#if defined(RCC_CFGR3_USBSW_HSI48)
case LL_RCC_USB_CLKSOURCE_HSI48: /* HSI48 clock used as USB clock source */
default:
if (LL_RCC_HSI48_IsReady())
{
usb_frequency = HSI48_VALUE;
}
break;
#else
case LL_RCC_USB_CLKSOURCE_NONE: /* No clock used as USB clock source */
default:
usb_frequency = LL_RCC_PERIPH_FREQUENCY_NA;
break;
#endif /* RCC_CFGR3_USBSW_HSI48 */
}
return usb_frequency;
}
#endif /* USB */
#if defined(CEC)
/**
* @brief Return CECx clock frequency
* @param CECxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_CEC_CLKSOURCE
* @retval CEC clock frequency (in Hz)
* @arg @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillators (HSI or LSE) are not ready
*/
uint32_t LL_RCC_GetCECClockFreq(uint32_t CECxSource)
{
uint32_t cec_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
/* Check parameter */
assert_param(IS_LL_RCC_CEC_CLKSOURCE(CECxSource));
/* CECCLK clock frequency */
switch (LL_RCC_GetCECClockSource(CECxSource))
{
case LL_RCC_CEC_CLKSOURCE_HSI_DIV244: /* HSI / 244 clock used as CEC clock source */
if (LL_RCC_HSI_IsReady())
{
cec_frequency = HSI_VALUE / 244U;
}
break;
case LL_RCC_CEC_CLKSOURCE_LSE: /* LSE clock used as CEC clock source */
default:
if (LL_RCC_LSE_IsReady())
{
cec_frequency = LSE_VALUE;
}
break;
}
return cec_frequency;
}
#endif /* CEC */
/**
* @}
*/
/**
* @}
*/
/** @addtogroup RCC_LL_Private_Functions
* @{
*/
/**
* @brief Return SYSTEM clock frequency
* @retval SYSTEM clock frequency (in Hz)
*/
uint32_t RCC_GetSystemClockFreq(void)
{
uint32_t frequency = 0U;
/* Get SYSCLK source -------------------------------------------------------*/
switch (LL_RCC_GetSysClkSource())
{
case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */
frequency = HSI_VALUE;
break;
case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */
frequency = HSE_VALUE;
break;
case LL_RCC_SYS_CLKSOURCE_STATUS_PLL: /* PLL used as system clock source */
frequency = RCC_PLL_GetFreqDomain_SYS();
break;
#if defined(RCC_HSI48_SUPPORT)
case LL_RCC_SYS_CLKSOURCE_STATUS_HSI48:/* HSI48 used as system clock source */
frequency = HSI48_VALUE;
break;
#endif /* RCC_HSI48_SUPPORT */
default:
frequency = HSI_VALUE;
break;
}
return frequency;
}
/**
* @brief Return HCLK clock frequency
* @param SYSCLK_Frequency SYSCLK clock frequency
* @retval HCLK clock frequency (in Hz)
*/
uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency)
{
/* HCLK clock frequency */
return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler());
}
/**
* @brief Return PCLK1 clock frequency
* @param HCLK_Frequency HCLK clock frequency
* @retval PCLK1 clock frequency (in Hz)
*/
uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency)
{
/* PCLK1 clock frequency */
return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler());
}
/**
* @brief Return PLL clock frequency used for system domain
* @retval PLL clock frequency (in Hz)
*/
uint32_t RCC_PLL_GetFreqDomain_SYS(void)
{
uint32_t pllinputfreq = 0U, pllsource = 0U;
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL divider) * PLL Multiplicator */
/* Get PLL source */
pllsource = LL_RCC_PLL_GetMainSource();
switch (pllsource)
{
#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */
pllinputfreq = HSI_VALUE;
#else
case LL_RCC_PLLSOURCE_HSI_DIV_2: /* HSI used as PLL clock source */
pllinputfreq = HSI_VALUE / 2U;
#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
break;
#if defined(RCC_HSI48_SUPPORT)
case LL_RCC_PLLSOURCE_HSI48: /* HSI48 used as PLL clock source */
pllinputfreq = HSI48_VALUE;
break;
#endif /* RCC_HSI48_SUPPORT */
case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */
pllinputfreq = HSE_VALUE;
break;
default:
#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
pllinputfreq = HSI_VALUE;
#else
pllinputfreq = HSI_VALUE / 2U;
#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
break;
}
#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
return __LL_RCC_CALC_PLLCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetMultiplicator(), LL_RCC_PLL_GetPrediv());
#else
return __LL_RCC_CALC_PLLCLK_FREQ((pllinputfreq / (LL_RCC_PLL_GetPrediv() + 1U)), LL_RCC_PLL_GetMultiplicator());
#endif /* RCC_PLLSRC_PREDIV1_SUPPORT */
}
/**
* @}
*/
/**
* @}
*/
#endif /* defined(RCC) */
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

622
peripherals/cc48x6/bootloader/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_utils.c Normal file
View file

@ -0,0 +1,622 @@
/**
******************************************************************************
* @file stm32f0xx_ll_utils.c
* @author MCD Application Team
* @brief UTILS LL module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_ll_rcc.h"
#include "stm32f0xx_ll_utils.h"
#include "stm32f0xx_ll_system.h"
#ifdef USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
/** @addtogroup UTILS_LL
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @addtogroup UTILS_LL_Private_Constants
* @{
*/
/* Defines used for PLL range */
#define UTILS_PLL_OUTPUT_MIN 16000000U /*!< Frequency min for PLL output, in Hz */
#define UTILS_PLL_OUTPUT_MAX 48000000U /*!< Frequency max for PLL output, in Hz */
/* Defines used for HSE range */
#define UTILS_HSE_FREQUENCY_MIN 4000000U /*!< Frequency min for HSE frequency, in Hz */
#define UTILS_HSE_FREQUENCY_MAX 32000000U /*!< Frequency max for HSE frequency, in Hz */
/* Defines used for FLASH latency according to SYSCLK Frequency */
#define UTILS_LATENCY1_FREQ 24000000U /*!< SYSCLK frequency to set FLASH latency 1 */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup UTILS_LL_Private_Macros
* @{
*/
#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \
|| ((__VALUE__) == LL_RCC_SYSCLK_DIV_512))
#define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \
|| ((__VALUE__) == LL_RCC_APB1_DIV_2) \
|| ((__VALUE__) == LL_RCC_APB1_DIV_4) \
|| ((__VALUE__) == LL_RCC_APB1_DIV_8) \
|| ((__VALUE__) == LL_RCC_APB1_DIV_16))
#define IS_LL_UTILS_PLLMUL_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLL_MUL_2) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_3) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_4) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_5) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_6) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_7) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_8) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_9) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_10) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_11) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_12) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_13) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_14) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_15) \
|| ((__VALUE__) == LL_RCC_PLL_MUL_16))
#define IS_LL_UTILS_PREDIV_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PREDIV_DIV_1) || ((__VALUE__) == LL_RCC_PREDIV_DIV_2) || \
((__VALUE__) == LL_RCC_PREDIV_DIV_3) || ((__VALUE__) == LL_RCC_PREDIV_DIV_4) || \
((__VALUE__) == LL_RCC_PREDIV_DIV_5) || ((__VALUE__) == LL_RCC_PREDIV_DIV_6) || \
((__VALUE__) == LL_RCC_PREDIV_DIV_7) || ((__VALUE__) == LL_RCC_PREDIV_DIV_8) || \
((__VALUE__) == LL_RCC_PREDIV_DIV_9) || ((__VALUE__) == LL_RCC_PREDIV_DIV_10) || \
((__VALUE__) == LL_RCC_PREDIV_DIV_11) || ((__VALUE__) == LL_RCC_PREDIV_DIV_12) || \
((__VALUE__) == LL_RCC_PREDIV_DIV_13) || ((__VALUE__) == LL_RCC_PREDIV_DIV_14) || \
((__VALUE__) == LL_RCC_PREDIV_DIV_15) || ((__VALUE__) == LL_RCC_PREDIV_DIV_16))
#define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((UTILS_PLL_OUTPUT_MIN <= (__VALUE__)) && ((__VALUE__) <= UTILS_PLL_OUTPUT_MAX))
#define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \
|| ((__STATE__) == LL_UTILS_HSEBYPASS_OFF))
#define IS_LL_UTILS_HSE_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) >= UTILS_HSE_FREQUENCY_MIN) && ((__FREQUENCY__) <= UTILS_HSE_FREQUENCY_MAX))
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup UTILS_LL_Private_Functions UTILS Private functions
* @{
*/
static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency,
LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct);
static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct);
static ErrorStatus UTILS_PLL_IsBusy(void);
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup UTILS_LL_Exported_Functions
* @{
*/
/** @addtogroup UTILS_LL_EF_DELAY
* @{
*/
/**
* @brief This function configures the Cortex-M SysTick source to have 1ms time base.
* @note When a RTOS is used, it is recommended to avoid changing the Systick
* configuration by calling this function, for a delay use rather osDelay RTOS service.
* @param HCLKFrequency HCLK frequency in Hz
* @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq
* @retval None
*/
void LL_Init1msTick(uint32_t HCLKFrequency)
{
/* Use frequency provided in argument */
LL_InitTick(HCLKFrequency, 1000U);
}
/**
* @brief This function provides accurate delay (in milliseconds) based
* on SysTick counter flag
* @note When a RTOS is used, it is recommended to avoid using blocking delay
* and use rather osDelay service.
* @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which
* will configure Systick to 1ms
* @param Delay specifies the delay time length, in milliseconds.
* @retval None
*/
void LL_mDelay(uint32_t Delay)
{
__IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */
/* Add this code to indicate that local variable is not used */
((void)tmp);
/* Add a period to guaranty minimum wait */
if (Delay < LL_MAX_DELAY)
{
Delay++;
}
while (Delay)
{
if ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U)
{
Delay--;
}
}
}
/**
* @}
*/
/** @addtogroup UTILS_EF_SYSTEM
* @brief System Configuration functions
*
@verbatim
===============================================================================
##### System Configuration functions #####
===============================================================================
[..]
System, AHB and APB buses clocks configuration
(+) The maximum frequency of the SYSCLK, HCLK, PCLK1 and PCLK2 is 48000000 Hz.
@endverbatim
@internal
Depending on the SYSCLK frequency, the flash latency should be adapted accordingly:
(++) +-----------------------------------------------+
(++) | Latency | SYSCLK clock frequency (MHz) |
(++) |---------------|-------------------------------|
(++) |0WS(1CPU cycle)| 0 < SYSCLK <= 24 |
(++) |---------------|-------------------------------|
(++) |1WS(2CPU cycle)| 24 < SYSCLK <= 48 |
(++) +-----------------------------------------------+
@endinternal
* @{
*/
/**
* @brief This function sets directly SystemCoreClock CMSIS variable.
* @note Variable can be calculated also through SystemCoreClockUpdate function.
* @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro)
* @retval None
*/
void LL_SetSystemCoreClock(uint32_t HCLKFrequency)
{
/* HCLK clock frequency */
SystemCoreClock = HCLKFrequency;
}
/**
* @brief Update number of Flash wait states in line with new frequency and current
voltage range.
* @param Frequency SYSCLK frequency
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Latency has been modified
* - ERROR: Latency cannot be modified
*/
#if defined(FLASH_ACR_LATENCY)
ErrorStatus LL_SetFlashLatency(uint32_t Frequency)
{
uint32_t timeout;
uint32_t getlatency;
uint32_t latency;
ErrorStatus status = SUCCESS;
/* Frequency cannot be equal to 0 */
if (Frequency == 0U)
{
status = ERROR;
}
else
{
if (Frequency > UTILS_LATENCY1_FREQ)
{
/* 24 < SYSCLK <= 48 => 1WS (2 CPU cycles) */
latency = LL_FLASH_LATENCY_1;
}
else
{
/* else SYSCLK < 24MHz default LL_FLASH_LATENCY_0 0WS */
latency = LL_FLASH_LATENCY_0;
}
if (status != ERROR)
{
LL_FLASH_SetLatency(latency);
/* Check that the new number of wait states is taken into account to access the Flash
memory by reading the FLASH_ACR register */
timeout = 2;
do
{
/* Wait for Flash latency to be updated */
getlatency = LL_FLASH_GetLatency();
timeout--;
} while ((getlatency != latency) && (timeout > 0));
if(getlatency != latency)
{
status = ERROR;
}
else
{
status = SUCCESS;
}
}
}
return status;
}
#endif /* FLASH_ACR_LATENCY */
/**
* @brief This function configures system clock with HSI as clock source of the PLL
* @note The application need to ensure that PLL is disabled.
* @note Function is based on the following formula:
* - PLL output frequency = ((HSI frequency / PREDIV) * PLLMUL)
* - PREDIV: Set to 2 for few devices
* - PLLMUL: The application software must set correctly the PLL multiplication factor to
* be in the range 16-48MHz
* @note FLASH latency can be modified through this function.
* @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
* the configuration information for the PLL.
* @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
* the configuration information for the BUS prescalers.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Max frequency configuration done
* - ERROR: Max frequency configuration not done
*/
ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
{
ErrorStatus status = SUCCESS;
uint32_t pllfreq = 0U;
/* Check if one of the PLL is enabled */
if (UTILS_PLL_IsBusy() == SUCCESS)
{
#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
/* Check PREDIV value */
assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->PLLDiv));
#else
/* Force PREDIV value to 2 */
UTILS_PLLInitStruct->Prediv = LL_RCC_PREDIV_DIV_2;
#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/
/* Calculate the new PLL output frequency */
pllfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct);
/* Enable HSI if not enabled */
if (LL_RCC_HSI_IsReady() != 1U)
{
LL_RCC_HSI_Enable();
while (LL_RCC_HSI_IsReady() != 1U)
{
/* Wait for HSI ready */
}
}
/* Configure PLL */
#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv);
#else
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI_DIV_2, UTILS_PLLInitStruct->PLLMul);
#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/
/* Enable PLL and switch system clock to PLL */
status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct);
}
else
{
/* Current PLL configuration cannot be modified */
status = ERROR;
}
return status;
}
#if defined(RCC_CFGR_SW_HSI48)
/**
* @brief This function configures system clock with HSI48 as clock source of the PLL
* @note The application need to ensure that PLL is disabled.
* @note Function is based on the following formula:
* - PLL output frequency = ((HSI48 frequency / PREDIV) * PLLMUL)
* - PLLMUL: The application software must set correctly the PLL multiplication factor to
* be in the range 16-48MHz
* @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
* the configuration information for the PLL.
* @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
* the configuration information for the BUS prescalers.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Max frequency configuration done
* - ERROR: Max frequency configuration not done
*/
ErrorStatus LL_PLL_ConfigSystemClock_HSI48(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct,
LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
{
ErrorStatus status = SUCCESS;
uint32_t pllfreq = 0U;
/* Check if one of the PLL is enabled */
if (UTILS_PLL_IsBusy() == SUCCESS)
{
/* Check PREDIV value */
assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->PLLDiv));
/* Calculate the new PLL output frequency */
pllfreq = UTILS_GetPLLOutputFrequency(HSI48_VALUE, UTILS_PLLInitStruct);
/* Enable HSI48 if not enabled */
if (LL_RCC_HSI48_IsReady() != 1U)
{
LL_RCC_HSI48_Enable();
while (LL_RCC_HSI48_IsReady() != 1U)
{
/* Wait for HSI48 ready */
}
}
/* Configure PLL */
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI48, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv);
/* Enable PLL and switch system clock to PLL */
status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct);
}
else
{
/* Current PLL configuration cannot be modified */
status = ERROR;
}
return status;
}
#endif /*RCC_CFGR_SW_HSI48*/
/**
* @brief This function configures system clock with HSE as clock source of the PLL
* @note The application need to ensure that PLL is disabled.
* @note Function is based on the following formula:
* - PLL output frequency = ((HSE frequency / PREDIV) * PLLMUL)
* - PLLMUL: The application software must set correctly the PLL multiplication factor to
* be in the range 16-48MHz
* @note FLASH latency can be modified through this function.
* @param HSEFrequency Value between Min_Data = 4000000 and Max_Data = 32000000
* @param HSEBypass This parameter can be one of the following values:
* @arg @ref LL_UTILS_HSEBYPASS_ON
* @arg @ref LL_UTILS_HSEBYPASS_OFF
* @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
* the configuration information for the PLL.
* @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
* the configuration information for the BUS prescalers.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Max frequency configuration done
* - ERROR: Max frequency configuration not done
*/
ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypass,
LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
{
ErrorStatus status = SUCCESS;
uint32_t pllfreq = 0U;
/* Check the parameters */
assert_param(IS_LL_UTILS_HSE_FREQUENCY(HSEFrequency));
assert_param(IS_LL_UTILS_HSE_BYPASS(HSEBypass));
/* Check if one of the PLL is enabled */
if (UTILS_PLL_IsBusy() == SUCCESS)
{
/* Check PREDIV value */
#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->PLLDiv));
#else
assert_param(IS_LL_UTILS_PREDIV_VALUE(UTILS_PLLInitStruct->Prediv));
#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/
/* Calculate the new PLL output frequency */
pllfreq = UTILS_GetPLLOutputFrequency(HSEFrequency, UTILS_PLLInitStruct);
/* Enable HSE if not enabled */
if (LL_RCC_HSE_IsReady() != 1U)
{
/* Check if need to enable HSE bypass feature or not */
if (HSEBypass == LL_UTILS_HSEBYPASS_ON)
{
LL_RCC_HSE_EnableBypass();
}
else
{
LL_RCC_HSE_DisableBypass();
}
/* Enable HSE */
LL_RCC_HSE_Enable();
while (LL_RCC_HSE_IsReady() != 1U)
{
/* Wait for HSE ready */
}
}
/* Configure PLL */
#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv);
#else
LL_RCC_PLL_ConfigDomain_SYS((RCC_CFGR_PLLSRC_HSE_PREDIV | UTILS_PLLInitStruct->Prediv), UTILS_PLLInitStruct->PLLMul);
#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/
/* Enable PLL and switch system clock to PLL */
status = UTILS_EnablePLLAndSwitchSystem(pllfreq, UTILS_ClkInitStruct);
}
else
{
/* Current PLL configuration cannot be modified */
status = ERROR;
}
return status;
}
/**
* @}
*/
/**
* @}
*/
/** @addtogroup UTILS_LL_Private_Functions
* @{
*/
/**
* @brief Function to check that PLL can be modified
* @param PLL_InputFrequency PLL input frequency (in Hz)
* @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains
* the configuration information for the PLL.
* @retval PLL output frequency (in Hz)
*/
static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct)
{
uint32_t pllfreq = 0U;
/* Check the parameters */
assert_param(IS_LL_UTILS_PLLMUL_VALUE(UTILS_PLLInitStruct->PLLMul));
/* Check different PLL parameters according to RM */
/* The application software must set correctly the PLL multiplication factor to
be in the range 16-48MHz */
#if defined(RCC_PLLSRC_PREDIV1_SUPPORT)
pllfreq = __LL_RCC_CALC_PLLCLK_FREQ(PLL_InputFrequency, UTILS_PLLInitStruct->PLLMul, UTILS_PLLInitStruct->PLLDiv);
#else
pllfreq = __LL_RCC_CALC_PLLCLK_FREQ(PLL_InputFrequency / (UTILS_PLLInitStruct->Prediv + 1U), UTILS_PLLInitStruct->PLLMul);
#endif /*RCC_PLLSRC_PREDIV1_SUPPORT*/
assert_param(IS_LL_UTILS_PLL_FREQUENCY(pllfreq));
return pllfreq;
}
/**
* @brief Function to check that PLL can be modified
* @retval An ErrorStatus enumeration value:
* - SUCCESS: PLL modification can be done
* - ERROR: PLL is busy
*/
static ErrorStatus UTILS_PLL_IsBusy(void)
{
ErrorStatus status = SUCCESS;
/* Check if PLL is busy*/
if (LL_RCC_PLL_IsReady() != 0U)
{
/* PLL configuration cannot be modified */
status = ERROR;
}
return status;
}
/**
* @brief Function to enable PLL and switch system clock to PLL
* @param SYSCLK_Frequency SYSCLK frequency
* @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains
* the configuration information for the BUS prescalers.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: No problem to switch system to PLL
* - ERROR: Problem to switch system to PLL
*/
static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct)
{
ErrorStatus status = SUCCESS;
uint32_t sysclk_frequency_current = 0U;
assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->AHBCLKDivider));
assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider));
/* Calculate current SYSCLK frequency */
sysclk_frequency_current = (SystemCoreClock << AHBPrescTable[LL_RCC_GetAHBPrescaler() >> RCC_POSITION_HPRE]);
/* Increasing the number of wait states because of higher CPU frequency */
if (sysclk_frequency_current < SYSCLK_Frequency)
{
/* Set FLASH latency to highest latency */
status = LL_SetFlashLatency(SYSCLK_Frequency);
}
/* Update system clock configuration */
if (status == SUCCESS)
{
/* Enable PLL */
LL_RCC_PLL_Enable();
while (LL_RCC_PLL_IsReady() != 1U)
{
/* Wait for PLL ready */
}
/* Sysclk activation on the main PLL */
LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->AHBCLKDivider);
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
{
/* Wait for system clock switch to PLL */
}
/* Set APB1 & APB2 prescaler*/
LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider);
}
/* Decreasing the number of wait states because of lower CPU frequency */
if (sysclk_frequency_current > SYSCLK_Frequency)
{
/* Set FLASH latency to lowest latency */
status = LL_SetFlashLatency(SYSCLK_Frequency);
}
/* Update SystemCoreClock variable */
if (status == SUCCESS)
{
LL_SetSystemCoreClock(__LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->AHBCLKDivider));
}
return status;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

94
peripherals/cc48x6/bootloader/Inc/main.h Normal file
View file

@ -0,0 +1,94 @@
/**
******************************************************************************
* @file : main.h
* @brief : Header for main.c file.
* This file contains the common defines of the application.
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
#ifndef __MAIN_H
#define __MAIN_H
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32f0xx_ll_crs.h"
#include "stm32f0xx_ll_rcc.h"
#include "stm32f0xx_ll_bus.h"
#include "stm32f0xx_ll_system.h"
#include "stm32f0xx_ll_exti.h"
#include "stm32f0xx_ll_cortex.h"
#include "stm32f0xx_ll_utils.h"
#include "stm32f0xx_ll_pwr.h"
#include "stm32f0xx_ll_dma.h"
#include "stm32f0xx_ll_gpio.h"
#if defined(USE_FULL_ASSERT)
#include "stm32_assert.h"
#endif /* USE_FULL_ASSERT */
void Error_Handler(void);
#define SIGNAL_LED_Pin LL_GPIO_PIN_3
#define SIGNAL_LED_GPIO_Port GPIOA
#ifndef NVIC_PRIORITYGROUP_0
#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bit for pre-emption priority,
4 bits for subpriority */
#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bit for pre-emption priority,
3 bits for subpriority */
#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority,
2 bits for subpriority */
#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority,
1 bit for subpriority */
#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority,
0 bit for subpriority */
#endif
#ifdef __cplusplus
}
#endif
#endif /* __MAIN_H */

62
peripherals/cc48x6/bootloader/Inc/stm32f0xx_it.h Normal file
View file

@ -0,0 +1,62 @@
/**
******************************************************************************
* @file stm32f0xx_it.h
* @brief This file contains the headers of the interrupt handlers.
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
#ifndef __STM32F0xx_IT_H
#define __STM32F0xx_IT_H
#ifdef __cplusplus
extern "C" {
#endif
void NMI_Handler(void);
void HardFault_Handler(void);
void SVC_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_IT_H */

183
peripherals/cc48x6/bootloader/Makefile Normal file
View file

@ -0,0 +1,183 @@
######################################
# target
######################################
TARGET = f030c8t_bootloader
######################################
# building variables
######################################
# debug build?
DEBUG = 0
# optimization
OPT = -O3 -flto
#######################################
# paths
#######################################
# Build path
BUILD_DIR = build
######################################
# source
######################################
# C sources
C_SOURCES = \
Src/boot.c \
Src/stm32f0xx_it.c \
Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_exti.c \
Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_rcc.c \
Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_utils.c \
Src/system_stm32f0xx.c \
Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_gpio.c \
Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_ll_pwr.c
# ASM sources
ASM_SOURCES = \
startup_stm32f030x8.s
#######################################
# binaries
#######################################
PREFIX = arm-none-eabi-
# The gcc compiler bin path can be either defined in make command via GCC_PATH variable (> make GCC_PATH=xxx)
# either it can be added to the PATH environment variable.
ifdef GCC_PATH
CC = $(GCC_PATH)/$(PREFIX)gcc
AS = $(GCC_PATH)/$(PREFIX)gcc -x assembler-with-cpp
CP = $(GCC_PATH)/$(PREFIX)objcopy
SZ = $(GCC_PATH)/$(PREFIX)size
else
CC = $(PREFIX)gcc
AS = $(PREFIX)gcc -x assembler-with-cpp
CP = $(PREFIX)objcopy
SZ = $(PREFIX)size
endif
HEX = $(CP) -O ihex
BIN = $(CP) -O binary -S
#######################################
# CFLAGS
#######################################
# cpu
CPU = -mcpu=cortex-m0
# fpu
# NONE for Cortex-M0/M0+/M3
# float-abi
# mcu
MCU = $(CPU) -mthumb $(FPU) $(FLOAT-ABI)
# macros for gcc
# AS defines
AS_DEFS =
# C defines
C_DEFS = \
-DUSE_FULL_LL_DRIVER \
-DSTM32F030x8 \
-DHSE_VALUE=8000000 \
-DHSE_STARTUP_TIMEOUT=100 \
-DLSE_STARTUP_TIMEOUT=5000 \
-DLSE_VALUE=32768 \
-DHSI_VALUE=8000000 \
-DLSI_VALUE=40000 \
-DVDD_VALUE=3300 \
-DPREFETCH_ENABLE=1 \
-DINSTRUCTION_CACHE_ENABLE=0 \
-DDATA_CACHE_ENABLE=0
# AS includes
AS_INCLUDES =
# C includes
C_INCLUDES = \
-IInc \
-IDrivers/STM32F0xx_HAL_Driver/Inc \
-IDrivers/CMSIS/Device/ST/STM32F0xx/Include \
-IDrivers/CMSIS/Include
# compile gcc flags
ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
CFLAGS = $(MCU) $(C_DEFS) $(C_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
ifeq ($(DEBUG), 1)
CFLAGS += -g -gdwarf-2
endif
# Generate dependency information
CFLAGS += -MMD -MP -MF"$(@:%.o=%.d)"
#######################################
# LDFLAGS
#######################################
# link script
LDSCRIPT = STM32F030C8Tx_FLASH.ld
# libraries
LIBS = -lc -lm -lnosys
LIBDIR =
LDFLAGS = $(MCU) -specs=nano.specs -T$(LDSCRIPT) $(LIBDIR) $(LIBS) -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref -Wl,--gc-sections
# default action: build all
all: $(BUILD_DIR)/$(TARGET).elf $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
#######################################
# build the application
#######################################
# list of objects
OBJECTS = $(addprefix $(BUILD_DIR)/,$(notdir $(C_SOURCES:.c=.o)))
vpath %.c $(sort $(dir $(C_SOURCES)))
# list of ASM program objects
OBJECTS += $(addprefix $(BUILD_DIR)/,$(notdir $(ASM_SOURCES:.s=.o)))
vpath %.s $(sort $(dir $(ASM_SOURCES)))
$(BUILD_DIR)/%.o: %.c Makefile | $(BUILD_DIR)
$(CC) -c $(CFLAGS) -Wa,-a,-ad,-alms=$(BUILD_DIR)/$(notdir $(<:.c=.lst)) $< -o $@
$(BUILD_DIR)/%.o: %.s Makefile | $(BUILD_DIR)
$(AS) -c $(CFLAGS) $< -o $@
$(BUILD_DIR)/$(TARGET).elf: $(OBJECTS) Makefile
$(CC) $(OBJECTS) $(LDFLAGS) -o $@
$(SZ) $@
$(BUILD_DIR)/%.hex: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
$(HEX) $< $@
$(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
$(BIN) $< $@
$(BUILD_DIR):
mkdir $@
#######################################
# flash the program
#######################################
flash: $(BUILD_DIR)/$(TARGET).bin
st-flash --connect-under-reset write $(BUILD_DIR)/$(TARGET).bin 0x8000000
#######################################
# clean up
#######################################
clean:
-rm -fR $(BUILD_DIR)
#######################################
# dependencies
#######################################
-include $(wildcard $(BUILD_DIR)/*.d)
# *** EOF ***

189
peripherals/cc48x6/bootloader/STM32F030C8Tx_FLASH.ld Normal file
View file

@ -0,0 +1,189 @@
/*
******************************************************************************
**
** File : LinkerScript.ld
**
** Author : Auto-generated by System Workbench for STM32
**
** Abstract : Linker script for STM32F030C8Tx series
** 64Kbytes FLASH and 8Kbytes RAM
**
** Set heap size, stack size and stack location according
** to application requirements.
**
** Set memory bank area and size if external memory is used.
**
** Target : STMicroelectronics STM32
**
** Distribution: The file is distributed “as is,” without any warranty
** of any kind.
**
*****************************************************************************
** @attention
**
** <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
**
** Redistribution and use in source and binary forms, with or without modification,
** are permitted provided that the following conditions are met:
** 1. Redistributions of source code must retain the above copyright notice,
** this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright notice,
** this list of conditions and the following disclaimer in the documentation
** and/or other materials provided with the distribution.
** 3. Neither the name of STMicroelectronics nor the names of its contributors
** may be used to endorse or promote products derived from this software
** without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**
*****************************************************************************
*/
/* Entry Point */
ENTRY(Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20002000; /* end of RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0x200; /* required amount of heap */
_Min_Stack_Size = 0x400; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 64K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >FLASH
/* Constant data goes into FLASH */
.rodata :
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >FLASH
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >FLASH
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >FLASH
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >FLASH
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >FLASH
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> FLASH
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(8);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(8);
} >RAM
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}

107
peripherals/cc48x6/bootloader/Src/boot.c Normal file
View file

@ -0,0 +1,107 @@
/**
******************************************************************************
* @file : main.c
* @brief : Main program body
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
#include "main.h"
static void Init(void);
/**
* @brief The application entry point.
* @retval int
*/
int boot(void) {
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_SYSCFG);
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
Init();
LL_GPIO_ResetOutputPin(GPIOA, LL_GPIO_PIN_3);
LL_mDelay(100);
LL_GPIO_SetOutputPin(GPIOA, LL_GPIO_PIN_3);
/* Infinite loop */
while (1) {
}
}
static void Init(void) {
LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
while (LL_FLASH_GetLatency() != LL_FLASH_LATENCY_1) {
}
LL_RCC_HSI_Enable();
/* Wait till HSI is ready */
while (LL_RCC_HSI_IsReady() != 1) {
}
LL_RCC_HSI_SetCalibTrimming(16);
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI_DIV_2, LL_RCC_PLL_MUL_12);
LL_RCC_PLL_Enable();
/* Wait till PLL is ready */
while (LL_RCC_PLL_IsReady() != 1) {
}
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
/* Wait till System clock is ready */
while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) {
}
LL_Init1msTick(48000000);
LL_SetSystemCoreClock(48000000);
LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
/* GPIO Ports Clock Enable */
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA);
/**/
LL_GPIO_ResetOutputPin(GPIOA, LL_GPIO_PIN_3);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_3;
GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
}
void Error_Handler(void) {
/* User can add his own implementation to report the HAL error return state */
__disable_irq();
while (1) {
}
}

208
peripherals/cc48x6/bootloader/Src/main.c Normal file
View file

@ -0,0 +1,208 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.c
* @brief : Main program body
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */
/* USER CODE END PTD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
* @brief The application entry point.
* @retval int
*/
int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MCU Configuration--------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_SYSCFG);
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
/* System interrupt init*/
/* SysTick_IRQn interrupt configuration */
NVIC_SetPriority(SysTick_IRQn, 3);
/* USER CODE BEGIN Init */
/* USER CODE END Init */
/* Configure the system clock */
SystemClock_Config();
/* USER CODE BEGIN SysInit */
/* USER CODE END SysInit */
/* Initialize all configured peripherals */
MX_GPIO_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
/* USER CODE END WHILE */
LL_GPIO_TogglePin(SIGNAL_LED_GPIO_Port, SIGNAL_LED_Pin);
LL_mDelay(50);
/* USER CODE BEGIN 3 */
}
/* USER CODE END 3 */
}
/**
* @brief System Clock Configuration
* @retval None
*/
void SystemClock_Config(void)
{
LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
while(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_1)
{
}
LL_RCC_HSI_Enable();
/* Wait till HSI is ready */
while(LL_RCC_HSI_IsReady() != 1)
{
}
LL_RCC_HSI_SetCalibTrimming(16);
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI_DIV_2, LL_RCC_PLL_MUL_12);
LL_RCC_PLL_Enable();
/* Wait till PLL is ready */
while(LL_RCC_PLL_IsReady() != 1)
{
}
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
/* Wait till System clock is ready */
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
{
}
LL_Init1msTick(48000000);
LL_SetSystemCoreClock(48000000);
}
/**
* @brief GPIO Initialization Function
* @param None
* @retval None
*/
static void MX_GPIO_Init(void)
{
LL_GPIO_InitTypeDef GPIO_InitStruct = {0};
/* GPIO Ports Clock Enable */
LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA);
/**/
LL_GPIO_ResetOutputPin(GPIOA, LL_GPIO_PIN_3);
/**/
GPIO_InitStruct.Pin = LL_GPIO_PIN_3;
GPIO_InitStruct.Mode = LL_GPIO_MODE_OUTPUT;
GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
LL_GPIO_Init(GPIOA, &GPIO_InitStruct);
}
/* USER CODE BEGIN 4 */
/* USER CODE END 4 */
/**
* @brief This function is executed in case of error occurrence.
* @retval None
*/
void Error_Handler(void)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
__disable_irq();
while (1)
{
}
/* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */

146
peripherals/cc48x6/bootloader/Src/stm32f0xx_it.c Normal file
View file

@ -0,0 +1,146 @@
/**
******************************************************************************
* @file stm32f0xx_it.c
* @brief Interrupt Service Routines.
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
#include "main.h"
#include "stm32f0xx_it.h"
/******************************************************************************/
/* Cortex-M0 Processor Interruption and Exception Handlers */
/******************************************************************************/
/**
* @brief This function handles Non maskable interrupt.
*/
void NMI_Handler(void)
{
while (1)
{
}
}
/**
* @brief This function handles Hard fault interrupt.
*/
void HardFault_Handler(void)
{
while (1)
{
}
}
/**
* @brief This function handles System service call via SWI instruction.
*/
void SVC_Handler(void)
{
}
/**
* @brief This function handles Pendable request for system service.
*/
void PendSV_Handler(void)
{
}
/**
* @brief This function handles System tick timer.
*/
void SysTick_Handler(void)
{
}
/******************************************************************************/
/* STM32F0xx Peripheral Interrupt Handlers */
/* Add here the Interrupt Handlers for the used peripherals. */
/* For the available peripheral interrupt handler names, */
/* please refer to the startup file (startup_stm32f0xx.s). */
/******************************************************************************/

247
peripherals/cc48x6/bootloader/Src/system_stm32f0xx.c Normal file
View file

@ -0,0 +1,247 @@
/**
******************************************************************************
* @file system_stm32f0xx.c
* @author MCD Application Team
* @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File.
*
* 1. This file provides two functions and one global variable to be called from
* user application:
* - SystemInit(): This function is called at startup just after reset and
* before branch to main program. This call is made inside
* the "startup_stm32f0xx.s" file.
*
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
* by the user application to setup the SysTick
* timer or configure other parameters.
*
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
* be called whenever the core clock is changed
* during program execution.
*
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32f0xx_system
* @{
*/
/** @addtogroup STM32F0xx_System_Private_Includes
* @{
*/
#include "stm32f0xx.h"
/**
* @}
*/
/** @addtogroup STM32F0xx_System_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F0xx_System_Private_Defines
* @{
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
This value can be provided and adapted by the user application. */
#endif /* HSE_VALUE */
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
This value can be provided and adapted by the user application. */
#endif /* HSI_VALUE */
#if !defined (HSI48_VALUE)
#define HSI48_VALUE ((uint32_t)48000000) /*!< Default value of the HSI48 Internal oscillator in Hz.
This value can be provided and adapted by the user application. */
#endif /* HSI48_VALUE */
/**
* @}
*/
/** @addtogroup STM32F0xx_System_Private_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F0xx_System_Private_Variables
* @{
*/
/* This variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
uint32_t SystemCoreClock = 8000000;
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
/**
* @}
*/
/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32F0xx_System_Private_Functions
* @{
*/
/**
* @brief Setup the microcontroller system
* @param None
* @retval None
*/
void SystemInit(void)
{
/* NOTE :SystemInit(): This function is called at startup just after reset and
before branch to main program. This call is made inside
the "startup_stm32f0xx.s" file.
User can setups the default system clock (System clock source, PLL Multiplier
and Divider factors, AHB/APBx prescalers and Flash settings).
*/
}
/**
* @brief Update SystemCoreClock variable according to Clock Register Values.
* The SystemCoreClock variable contains the core clock (HCLK), it can
* be used by the user application to setup the SysTick timer or configure
* other parameters.
*
* @note Each time the core clock (HCLK) changes, this function must be called
* to update SystemCoreClock variable value. Otherwise, any configuration
* based on this variable will be incorrect.
*
* @note - The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
*
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
*
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
*
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
*
* (*) HSI_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value
* 8 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (**) HSE_VALUE is a constant defined in stm32f0xx_hal_conf.h file (its value
* depends on the application requirements), user has to ensure that HSE_VALUE
* is same as the real frequency of the crystal used. Otherwise, this function
* may have wrong result.
*
* - The result of this function could be not correct when using fractional
* value for HSE crystal.
*
* @param None
* @retval None
*/
void SystemCoreClockUpdate (void)
{
uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
tmp = RCC->CFGR & RCC_CFGR_SWS;
switch (tmp)
{
case RCC_CFGR_SWS_HSI: /* HSI used as system clock */
SystemCoreClock = HSI_VALUE;
break;
case RCC_CFGR_SWS_HSE: /* HSE used as system clock */
SystemCoreClock = HSE_VALUE;
break;
case RCC_CFGR_SWS_PLL: /* PLL used as system clock */
pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
pllmull = ( pllmull >> 18) + 2;
predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
{
/* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */
SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull;
}
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV)
{
/* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */
SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull;
}
#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
else
{
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) \
|| defined(STM32F078xx) || defined(STM32F071xB) || defined(STM32F072xB) \
|| defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
/* HSI used as PLL clock source : SystemCoreClock = HSI/PREDIV * PLLMUL */
SystemCoreClock = (HSI_VALUE/predivfactor) * pllmull;
#else
/* HSI used as PLL clock source : SystemCoreClock = HSI/2 * PLLMUL */
SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 ||
STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB ||
STM32F091xC || STM32F098xx || STM32F030xC */
}
break;
default: /* HSI used as system clock */
SystemCoreClock = HSI_VALUE;
break;
}
/* Compute HCLK clock frequency ----------------*/
/* Get HCLK prescaler */
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
/* HCLK clock frequency */
SystemCoreClock >>= tmp;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

273
peripherals/cc48x6/bootloader/startup_stm32f030x8.s Normal file
View file

@ -0,0 +1,273 @@
/**
******************************************************************************
* @file startup_stm32f030x8.s
* @author MCD Application Team
* @brief STM32F030x8 devices vector table for GCC toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to boot in the C library (which eventually
* calls boot()).
* After Reset the Cortex-M0 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m0
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr r0, =_estack
mov sp, r0 /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
ldr r0, =_sdata
ldr r1, =_edata
ldr r2, =_sidata
movs r3, #0
b LoopCopyDataInit
CopyDataInit:
ldr r4, [r2, r3]
str r4, [r0, r3]
adds r3, r3, #4
LoopCopyDataInit:
adds r4, r0, r3
cmp r4, r1
bcc CopyDataInit
/* Zero fill the bss segment. */
ldr r2, =_sbss
ldr r4, =_ebss
movs r3, #0
b LoopFillZerobss
FillZerobss:
str r3, [r2]
adds r2, r2, #4
LoopFillZerobss:
cmp r2, r4
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl boot
LoopForever:
b LoopForever
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M0. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word 0
.word 0
.word PendSV_Handler
.word SysTick_Handler
.word WWDG_IRQHandler /* Window WatchDog */
.word 0 /* Reserved */
.word RTC_IRQHandler /* RTC through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */
.word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */
.word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */
.word 0 /* Reserved */
.word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */
.word DMA1_Channel2_3_IRQHandler /* DMA1 Channel 2 and Channel 3 */
.word DMA1_Channel4_5_IRQHandler /* DMA1 Channel 4 and Channel 5 */
.word ADC1_IRQHandler /* ADC1 */
.word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word 0 /* Reserved */
.word TIM3_IRQHandler /* TIM3 */
.word TIM6_IRQHandler /* TIM6 */
.word 0 /* Reserved */
.word TIM14_IRQHandler /* TIM14 */
.word TIM15_IRQHandler /* TIM15 */
.word TIM16_IRQHandler /* TIM16 */
.word TIM17_IRQHandler /* TIM17 */
.word I2C1_IRQHandler /* I2C1 */
.word I2C2_IRQHandler /* I2C2 */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word 0 /* Reserved */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_1_IRQHandler
.thumb_set EXTI0_1_IRQHandler,Default_Handler
.weak EXTI2_3_IRQHandler
.thumb_set EXTI2_3_IRQHandler,Default_Handler
.weak EXTI4_15_IRQHandler
.thumb_set EXTI4_15_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_3_IRQHandler
.thumb_set DMA1_Channel2_3_IRQHandler,Default_Handler
.weak DMA1_Channel4_5_IRQHandler
.thumb_set DMA1_Channel4_5_IRQHandler,Default_Handler
.weak ADC1_IRQHandler
.thumb_set ADC1_IRQHandler,Default_Handler
.weak TIM1_BRK_UP_TRG_COM_IRQHandler
.thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM6_IRQHandler
.thumb_set TIM6_IRQHandler,Default_Handler
.weak TIM14_IRQHandler
.thumb_set TIM14_IRQHandler,Default_Handler
.weak TIM15_IRQHandler
.thumb_set TIM15_IRQHandler,Default_Handler
.weak TIM16_IRQHandler
.thumb_set TIM16_IRQHandler,Default_Handler
.weak TIM17_IRQHandler
.thumb_set TIM17_IRQHandler,Default_Handler
.weak I2C1_IRQHandler
.thumb_set I2C1_IRQHandler,Default_Handler
.weak I2C2_IRQHandler
.thumb_set I2C2_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

1
peripherals/cc48x6/firmware/.gitignore vendored
View file

@ -1,3 +1,2 @@
build/
compile_commands.json
.idea/

7
peripherals/cc48x6/firmware/Makefile
View file

@ -199,6 +199,13 @@ $(BUILD_DIR)/%.bin: $(BUILD_DIR)/%.elf | $(BUILD_DIR)
$(BUILD_DIR):
mkdir $@
#######################################
# flash the program
#######################################
flash: $(BUILD_DIR)/$(TARGET).bin
st-flash --connect-under-reset write $(BUILD_DIR)/$(TARGET).bin 0x8000000
#######################################
# clean up
#######################################