248 lines
8.3 KiB
C
248 lines
8.3 KiB
C
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* @file system_stm32f0xx.c
|
||
|
|
* @author MCD Application Team
|
||
|
|
* @brief CMSIS Cortex-M0 Device Peripheral Access Layer System Source File.
|
||
|
|
*
|
||
|
|
* 1. This file provides two functions and one global variable to be called from
|
||
|
|
* user application:
|
||
|
|
* - SystemInit(): This function is called at startup just after reset and
|
||
|
|
* before branch to main program. This call is made inside
|
||
|
|
* the "startup_stm32f0xx.s" file.
|
||
|
|
*
|
||
|
|
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||
|
|
* by the user application to setup the SysTick
|
||
|
|
* timer or configure other parameters.
|
||
|
|
*
|
||
|
|
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||
|
|
* be called whenever the core clock is changed
|
||
|
|
* during program execution.
|
||
|
|
*
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
* @attention
|
||
|
|
*
|
||
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
||
|
|
* All rights reserved.</center></h2>
|
||
|
|
*
|
||
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||
|
|
* the "License"; You may not use this file except in compliance with the
|
||
|
|
* License. You may obtain a copy of the License at:
|
||
|
|
* opensource.org/licenses/BSD-3-Clause
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup CMSIS
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup stm32f0xx_system
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32F0xx_System_Private_Includes
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "stm32f0xx.h"
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32F0xx_System_Private_TypesDefinitions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32F0xx_System_Private_Defines
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
#if !defined (HSE_VALUE)
|
||
|
|
#define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
|
||
|
|
This value can be provided and adapted by the user application. */
|
||
|
|
#endif /* HSE_VALUE */
|
||
|
|
|
||
|
|
#if !defined (HSI_VALUE)
|
||
|
|
#define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
|
||
|
|
This value can be provided and adapted by the user application. */
|
||
|
|
#endif /* HSI_VALUE */
|
||
|
|
|
||
|
|
#if !defined (HSI48_VALUE)
|
||
|
|
#define HSI48_VALUE ((uint32_t)48000000) /*!< Default value of the HSI48 Internal oscillator in Hz.
|
||
|
|
This value can be provided and adapted by the user application. */
|
||
|
|
#endif /* HSI48_VALUE */
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32F0xx_System_Private_Macros
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32F0xx_System_Private_Variables
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
/* This variable is updated in three ways:
|
||
|
|
1) by calling CMSIS function SystemCoreClockUpdate()
|
||
|
|
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||
|
|
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||
|
|
Note: If you use this function to configure the system clock; then there
|
||
|
|
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||
|
|
variable is updated automatically.
|
||
|
|
*/
|
||
|
|
uint32_t SystemCoreClock = 8000000;
|
||
|
|
|
||
|
|
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||
|
|
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32F0xx_System_Private_FunctionPrototypes
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/** @addtogroup STM32F0xx_System_Private_Functions
|
||
|
|
* @{
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Setup the microcontroller system
|
||
|
|
* @param None
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void SystemInit(void)
|
||
|
|
{
|
||
|
|
/* NOTE :SystemInit(): This function is called at startup just after reset and
|
||
|
|
before branch to main program. This call is made inside
|
||
|
|
the "startup_stm32f0xx.s" file.
|
||
|
|
User can setups the default system clock (System clock source, PLL Multiplier
|
||
|
|
and Divider factors, AHB/APBx prescalers and Flash settings).
|
||
|
|
*/
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||
|
|
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||
|
|
* be used by the user application to setup the SysTick timer or configure
|
||
|
|
* other parameters.
|
||
|
|
*
|
||
|
|
* @note Each time the core clock (HCLK) changes, this function must be called
|
||
|
|
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||
|
|
* based on this variable will be incorrect.
|
||
|
|
*
|
||
|
|
* @note - The system frequency computed by this function is not the real
|
||
|
|
* frequency in the chip. It is calculated based on the predefined
|
||
|
|
* constant and the selected clock source:
|
||
|
|
*
|
||
|
|
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||
|
|
*
|
||
|
|
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||
|
|
*
|
||
|
|
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||
|
|
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
||
|
|
*
|
||
|
|
* (*) HSI_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value
|
||
|
|
* 8 MHz) but the real value may vary depending on the variations
|
||
|
|
* in voltage and temperature.
|
||
|
|
*
|
||
|
|
* (**) HSE_VALUE is a constant defined in stm32f0xx_hal_conf.h file (its value
|
||
|
|
* depends on the application requirements), user has to ensure that HSE_VALUE
|
||
|
|
* is same as the real frequency of the crystal used. Otherwise, this function
|
||
|
|
* may have wrong result.
|
||
|
|
*
|
||
|
|
* - The result of this function could be not correct when using fractional
|
||
|
|
* value for HSE crystal.
|
||
|
|
*
|
||
|
|
* @param None
|
||
|
|
* @retval None
|
||
|
|
*/
|
||
|
|
void SystemCoreClockUpdate (void)
|
||
|
|
{
|
||
|
|
uint32_t tmp = 0, pllmull = 0, pllsource = 0, predivfactor = 0;
|
||
|
|
|
||
|
|
|
||
|
|
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||
|
|
|
||
|
|
switch (tmp)
|
||
|
|
{
|
||
|
|
case RCC_CFGR_SWS_HSI: /* HSI used as system clock */
|
||
|
|
SystemCoreClock = HSI_VALUE;
|
||
|
|
break;
|
||
|
|
case RCC_CFGR_SWS_HSE: /* HSE used as system clock */
|
||
|
|
SystemCoreClock = HSE_VALUE;
|
||
|
|
break;
|
||
|
|
case RCC_CFGR_SWS_PLL: /* PLL used as system clock */
|
||
|
|
|
||
|
|
pllmull = RCC->CFGR & RCC_CFGR_PLLMUL;
|
||
|
|
pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
|
||
|
|
pllmull = ( pllmull >> 18) + 2;
|
||
|
|
predivfactor = (RCC->CFGR2 & RCC_CFGR2_PREDIV) + 1;
|
||
|
|
|
||
|
|
if (pllsource == RCC_CFGR_PLLSRC_HSE_PREDIV)
|
||
|
|
{
|
||
|
|
/* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */
|
||
|
|
SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull;
|
||
|
|
}
|
||
|
|
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
|
||
|
|
else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV)
|
||
|
|
{
|
||
|
|
/* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */
|
||
|
|
SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull;
|
||
|
|
}
|
||
|
|
#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
|
||
|
|
else
|
||
|
|
{
|
||
|
|
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) \
|
||
|
|
|| defined(STM32F078xx) || defined(STM32F071xB) || defined(STM32F072xB) \
|
||
|
|
|| defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
|
||
|
|
/* HSI used as PLL clock source : SystemCoreClock = HSI/PREDIV * PLLMUL */
|
||
|
|
SystemCoreClock = (HSI_VALUE/predivfactor) * pllmull;
|
||
|
|
#else
|
||
|
|
/* HSI used as PLL clock source : SystemCoreClock = HSI/2 * PLLMUL */
|
||
|
|
SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
|
||
|
|
#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 ||
|
||
|
|
STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB ||
|
||
|
|
STM32F091xC || STM32F098xx || STM32F030xC */
|
||
|
|
}
|
||
|
|
break;
|
||
|
|
default: /* HSI used as system clock */
|
||
|
|
SystemCoreClock = HSI_VALUE;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
/* Compute HCLK clock frequency ----------------*/
|
||
|
|
/* Get HCLK prescaler */
|
||
|
|
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
|
||
|
|
/* HCLK clock frequency */
|
||
|
|
SystemCoreClock >>= tmp;
|
||
|
|
}
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||
|
|
|