71 lines
2.4 KiB
Makefile
71 lines
2.4 KiB
Makefile
# This is a wrapper around the rboot makefile, which gives us the parameters
|
|
# we need to use rboot with esp-open-rtos
|
|
#
|
|
# The wrapper means we don't require esptool2 in the build process, so we can just use
|
|
# esptool.py (still need xxd, grep, sed to generate the header - see below.)
|
|
|
|
BUILD_DIR ?= build
|
|
FIRMWARE_DIR ?= firmware
|
|
|
|
# RBOOT configuration parameters.
|
|
# RBOOT_BIG_FLASH is required for esp-open-rtos.
|
|
export RBOOT_BIG_FLASH = 1
|
|
|
|
export RBOOT_BUILD_BASE=$(abspath $(BUILD_DIR))
|
|
|
|
# Default ESPTOOL params, all the same as when using normal esp-open-rtos makefiles
|
|
ESPTOOL ?= esptool.py
|
|
ESPPORT ?= /dev/ttyUSB0
|
|
ESPBAUD ?= 115200
|
|
|
|
FLASH_SIZE ?= 16
|
|
FLASH_MODE ?= qio
|
|
FLASH_SPEED ?= 40
|
|
|
|
ESPTOOL_ARGS=-fs $(FLASH_SIZE)m -fm $(FLASH_MODE) -ff $(FLASH_SPEED)m
|
|
|
|
ifeq ("$(V)","1")
|
|
Q :=
|
|
else
|
|
Q := @
|
|
endif
|
|
|
|
all: $(FIRMWARE_DIR)/rboot.bin
|
|
|
|
rboot/Makefile:
|
|
$(error rboot git submodule is not checkedo out. Try running 'git submodule update --init --recursive')
|
|
|
|
$(FIRMWARE_DIR)/rboot.bin: $(BUILD_DIR)/rboot.elf $(FIRMWARE_DIR)
|
|
@echo "FW rboot.bin"
|
|
$(Q) $(ESPTOOL) elf2image $(ESPTOOL_ARGS) $< -o $(BUILD_DIR)/
|
|
$(Q) mv $(BUILD_DIR)/0x00000.bin $@
|
|
|
|
# rboot generates this header using the 'esptool2 -header' option. To try and avoid
|
|
# esptool2 as a dependency, we try it here using grep, sed, xxd (all fairly common Unix tools)
|
|
$(BUILD_DIR)/rboot-hex2a.h: $(BUILD_DIR)/rboot-stage2a.elf $(BUILD_DIR)
|
|
@echo "Extracting stub image header..."
|
|
$(Q) xtensa-lx106-elf-objcopy $< --only-section .text -Obinary $(BUILD_DIR)/rboot-hex2a.bin
|
|
$(Q) xxd -i $(BUILD_DIR)/rboot-hex2a.bin > $@.in
|
|
$(Q) sed -i "s/unsigned char .\+\[\]/const uint8 _text_data[]/" $@.in
|
|
$(Q) sed -i "s/unsigned int .\+_len/const uint32 _text_len/" $@.in
|
|
$(Q) echo "const uint32 entry_addr = $$(xtensa-lx106-elf-objdump -f $< | grep 'start address' | grep -o '0x.\+');" >> $@.in
|
|
$(Q) echo "const uint32 _text_addr = 0x$$(xtensa-lx106-elf-objdump -h -j .text $< | grep ".text" | grep -o '401.....' | head -n1);" >> $@.in
|
|
$(Q) mv $@.in $@
|
|
|
|
$(BUILD_DIR)/rboot-stage2a.elf: $(BUILD_DIR)
|
|
$(Q) $(MAKE) -C rboot $(RBOOT_BUILD_BASE)/rboot-stage2a.elf
|
|
|
|
$(BUILD_DIR)/rboot.elf: $(BUILD_DIR)/rboot-hex2a.h
|
|
$(Q) $(MAKE) -C rboot $(RBOOT_BUILD_BASE)/rboot.elf
|
|
|
|
$(BUILD_DIR) $(FIRMWARE_DIR):
|
|
$(Q) mkdir -p "$@"
|
|
|
|
flash: $(FIRMWARE_DIR)/rboot.bin
|
|
$(Q) $(ESPTOOL) -p $(ESPPORT) -b $(ESPBAUD) write_flash $(ESPTOOL_ARGS) 0x0 $<
|
|
|
|
clean:
|
|
$(Q) rm -rf $(BUILD_DIR)
|
|
$(Q) rm -rf $(FIRMWARE_DIR)
|
|
|
|
.PHONY: all clean flash erase_config
|