j3d1/esp-open-rtos
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
esp-open-rtos/core/app_main.c
Our Air Quality c3dbac37ef Change the netif default to the station in STATIONAP mode. 
It seems most common for the connection to the wider internet to be
via the station netif even if there is also an AP netif, so set the
default to the station netif. The lwip ipv4 route logic will still use
the AP netif if the destination is to that subnet.
2017-12-30 20:51:53 +11:00

489 lines
16 KiB
C
Raw Blame History

/* Implementation of libmain/app_main.o from the Espressif SDK.
*
* This contains most of the startup code for the SDK/OS, some event handlers,
* etc.
*
* Part of esp-open-rtos
* Copyright (C) 2015 Superhouse Automation Pty Ltd
* BSD Licensed as described in the file LICENSE
*/
#include <string.h>
#include <FreeRTOS.h>
#include <task.h>
#include <lwip/tcpip.h>
#include "common_macros.h"
#include "xtensa_ops.h"
#include "esp/rom.h"
#include "esp/uart.h"
#include "esp/iomux_regs.h"
#include "esp/spi_regs.h"
#include "esp/dport_regs.h"
#include "esp/wdev_regs.h"
#include "esp/wdt_regs.h"
#include "esp/rtcmem_regs.h"
#include "esp/hwrand.h"
#include "os_version.h"
#include "espressif/esp_common.h"
#include "espressif/phy_info.h"
#include "esplibs/libmain.h"
#include "esplibs/libnet80211.h"
#include "esplibs/libphy.h"
#include "esplibs/libpp.h"
#include "sysparam.h"
/* This is not declared in any header file (but arguably should be) */
void user_init(void);
#define BOOT_INFO_SIZE 28
// These are the offsets of these values within the RTCMEM regions. It appears
// that the ROM saves them to RTCMEM before calling us, and we pull them out of
// there to display them in startup messages (not sure why it works that way).
#define RTCMEM_BACKUP_PHY_VER 31
#define RTCMEM_SYSTEM_PP_VER 62
extern uint32_t _bss_start;
extern uint32_t _bss_end;
// user_init_flag -- .bss+0x0
uint8_t sdk_user_init_flag;
// info -- .bss+0x4
struct sdk_info_st sdk_info;
// xUserTaskHandle -- .bss+0x28
TaskHandle_t sdk_xUserTaskHandle;
// xWatchDogTaskHandle -- .bss+0x2c
TaskHandle_t sdk_xWatchDogTaskHandle;
/* Static function prototypes */
static void IRAM get_otp_mac_address(uint8_t *buf);
static void IRAM set_spi0_divisor(uint32_t divisor);
static void zero_bss(void);
static void init_networking(sdk_phy_info_t *phy_info, uint8_t *mac_addr);
static void init_g_ic(void);
static void user_start_phase2(void);
static void dump_flash_sector(uint32_t start_sector, uint32_t length);
static void dump_flash_config_sectors(uint32_t start_sector);
// .Lfunc001 -- .text+0x14
static void IRAM get_otp_mac_address(uint8_t *buf) {
uint32_t otp_flags;
uint32_t otp_id0, otp_id1;
uint32_t otp_vendor_id;
otp_flags = DPORT.OTP_CHIPID;
otp_id1 = DPORT.OTP_MAC1;
otp_id0 = DPORT.OTP_MAC0;
if (!(otp_flags & 0x8000)) {
//FIXME: do we really need this check?
printf("Firmware ONLY supports ESP8266!!!\n");
abort();
}
if (otp_id0 == 0 && otp_id1 == 0) {
printf("empty otp\n");
abort();
}
if (otp_flags & 0x1000) {
// If bit 12 is set, it indicates that the vendor portion of the MAC
// address is stored in DPORT.OTP_MAC2.
otp_vendor_id = DPORT.OTP_MAC2;
buf[0] = otp_vendor_id >> 16;
buf[1] = otp_vendor_id >> 8;
buf[2] = otp_vendor_id;
} else {
// If bit 12 is clear, there's no MAC vendor in DPORT.OTP_MAC2, so
// default to the Espressif MAC vendor prefix instead.
buf[1] = 0xfe;
buf[0] = 0x18;
buf[2] = 0x34;
}
buf[3] = otp_id1 >> 8;
buf[4] = otp_id1;
buf[5] = otp_id0 >> 24;
}
// .Lfunc002 -- .text+0xa0
static void IRAM set_spi0_divisor(uint32_t divisor) {
int cycle_len, half_cycle_len, clkdiv;
if (divisor < 2) {
clkdiv = 0;
SPI(0).CTRL0 |= SPI_CTRL0_CLOCK_EQU_SYS_CLOCK;
IOMUX.CONF |= IOMUX_CONF_SPI0_CLOCK_EQU_SYS_CLOCK;
} else {
cycle_len = divisor - 1;
half_cycle_len = (divisor / 2) - 1;
clkdiv = VAL2FIELD(SPI_CTRL0_CLOCK_NUM, cycle_len)
| VAL2FIELD(SPI_CTRL0_CLOCK_HIGH, half_cycle_len)
| VAL2FIELD(SPI_CTRL0_CLOCK_LOW, cycle_len);
SPI(0).CTRL0 &= ~SPI_CTRL0_CLOCK_EQU_SYS_CLOCK;
IOMUX.CONF &= ~IOMUX_CONF_SPI0_CLOCK_EQU_SYS_CLOCK;
}
SPI(0).CTRL0 = SET_FIELD(SPI(0).CTRL0, SPI_CTRL0_CLOCK, clkdiv);
}
static void IRAM default_putc(char c) {
uart_putc(0, c);
}
void init_newlib_locks(void);
extern uint8_t sdk_wDevCtrl[];
void nano_malloc_insert_chunk(void *start, size_t size);
// .text+0x258
void IRAM sdk_user_start(void) {
uint32_t buf32[sizeof(struct sdk_g_ic_saved_st) / 4];
uint8_t *buf8 = (uint8_t *)buf32;
uint32_t flash_speed_divisor;
uint32_t flash_sectors;
uint32_t flash_size;
int boot_slot;
uint32_t cksum_magic;
uint32_t cksum_len;
uint32_t cksum_value;
uint32_t ic_flash_addr;
uint32_t sysparam_addr;
sysparam_status_t status;
SPI(0).USER0 |= SPI_USER0_CS_SETUP;
sdk_SPIRead(0, buf32, 4);
switch (buf8[3] & 0x0f) {
case 0xf: // 80 MHz
flash_speed_divisor = 1;
break;
case 0x0: // 40 MHz
flash_speed_divisor = 2;
break;
case 0x1: // 26 MHz
flash_speed_divisor = 3;
break;
case 0x2: // 20 MHz
flash_speed_divisor = 4;
break;
default: // Invalid -- Assume 40 MHz
flash_speed_divisor = 2;
}
switch (buf8[3] >> 4) {
case 0x0: // 4 Mbit (512 KByte)
flash_sectors = 128;
break;
case 0x1: // 2 Mbit (256 Kbyte)
flash_sectors = 64;
break;
case 0x2: // 8 Mbit (1 Mbyte)
flash_sectors = 256;
break;
case 0x3: // 16 Mbit (2 Mbyte)
flash_sectors = 512;
break;
case 0x4: // 32 Mbit (4 Mbyte)
flash_sectors = 1024;
break;
default: // Invalid -- Assume 4 Mbit (512 KByte)
flash_sectors = 128;
}
//FIXME: we should probably calculate flash_sectors by starting with flash_size and dividing by sdk_flashchip.sector_size instead of vice-versa.
flash_size = flash_sectors * 4096;
sdk_flashchip.chip_size = flash_size;
set_spi0_divisor(flash_speed_divisor);
sdk_SPIRead(flash_size - 4096, buf32, BOOT_INFO_SIZE);
boot_slot = buf8[0] ? 1 : 0;
cksum_magic = buf32[1];
cksum_len = buf32[3 + boot_slot];
cksum_value = buf32[5 + boot_slot];
ic_flash_addr = (flash_sectors - 3 + boot_slot) * sdk_flashchip.sector_size;
sdk_SPIRead(ic_flash_addr, buf32, sizeof(struct sdk_g_ic_saved_st));
Cache_Read_Enable(0, 0, 1);
zero_bss();
sdk_os_install_putc1(default_putc);
/* HACK Reclaim a region of unused bss from wdev.o. This would not be
* necessary if the source code to wdev were available, and then it would
* not be a fragmented area, but the extra memory is desparately needed and
* it is in very useful dram. */
nano_malloc_insert_chunk((void *)(sdk_wDevCtrl + 0x2190), 8000);
init_newlib_locks();
if (cksum_magic == 0xffffffff) {
// No checksum required
} else if ((cksum_magic == 0x55aa55aa) &&
(sdk_system_get_checksum(buf8, cksum_len) == cksum_value)) {
// Checksum OK
} else {
// Bad checksum or bad cksum_magic value
dump_flash_config_sectors(flash_sectors - 4);
//FIXME: should we halt here? (original SDK code doesn't)
}
memcpy(&sdk_g_ic.s, buf32, sizeof(struct sdk_g_ic_saved_st));
// By default, put the sysparam region just below the config sectors at the
// top of the flash space, and allowing one extra sector spare.
sysparam_addr = flash_size - (5 + DEFAULT_SYSPARAM_SECTORS) * sdk_flashchip.sector_size;
status = sysparam_init(sysparam_addr, flash_size);
if (status == SYSPARAM_NOTFOUND) {
status = sysparam_create_area(sysparam_addr, DEFAULT_SYSPARAM_SECTORS, false);
if (status == SYSPARAM_OK) {
status = sysparam_init(sysparam_addr, 0);
}
}
if (status != SYSPARAM_OK) {
printf("WARNING: Could not initialize sysparams (%d)!\n", status);
}
user_start_phase2();
}
// .text+0x3a8
void IRAM vApplicationStackOverflowHook(TaskHandle_t task, char *task_name) {
printf("Task stack overflow (high water mark=%lu name=\"%s\")\n", uxTaskGetStackHighWaterMark(task), task_name);
}
// .text+0x3d8
void __attribute__((weak)) IRAM vApplicationIdleHook(void) {
printf("idle %u\n", WDEV.SYS_TIME);
}
// .text+0x404
void __attribute__((weak)) IRAM vApplicationTickHook(void) {
printf("tick %u\n", WDEV.SYS_TIME);
}
// .Lfunc005 -- .irom0.text+0x8
static void zero_bss(void) {
uint32_t *addr;
for (addr = &_bss_start; addr < &_bss_end; addr++) {
*addr = 0;
}
}
// .Lfunc006 -- .irom0.text+0x70
static void init_networking(sdk_phy_info_t *phy_info, uint8_t *mac_addr) {
// The call to sdk_register_chipv6_phy appears to change the bus clock,
// perhaps from 40MHz to 26MHz, at least it has such an effect on the uart
// baud rate. The caller flushes the TX fifos.
if (sdk_register_chipv6_phy(phy_info)) {
printf("FATAL: sdk_register_chipv6_phy failed");
abort();
}
// The boot rom initializes uart0 for a 115200 baud rate but the bus clock
// does not appear to be as expected so the initial baud rate is actually
// 74906. On a cold boot, to keep the 74906 baud rate the uart0 divisor
// would need to changed here to 74906. On a warm boot the bus clock is
// expected to have already been set so the boot baud rate is 115200.
// Reset the rate here and settle on a 115200 baud rate.
if (sdk_rst_if.reason > 0) {
uart_set_baud(0, 115200);
uart_set_baud(1, 115200);
}
sdk_phy_disable_agc();
sdk_ieee80211_phy_init(sdk_g_ic.s.phy_mode);
sdk_lmacInit();
sdk_wDev_Initialize();
sdk_pp_attach();
sdk_ieee80211_ifattach(&sdk_g_ic, mac_addr);
_xt_isr_mask(1);
DPORT.DPORT0 = SET_FIELD(DPORT.DPORT0, DPORT_DPORT0_FIELD0, 1);
sdk_pm_attach();
sdk_phy_enable_agc();
sdk_cnx_attach(&sdk_g_ic);
sdk_wDevEnableRx();
}
// .Lfunc007 -- .irom0.text+0x148
static void init_g_ic(void) {
if (sdk_g_ic.s.wifi_mode == 0xff) {
sdk_g_ic.s.wifi_mode = 2;
}
sdk_wifi_softap_set_default_ssid();
if (sdk_g_ic.s._unknown30d < 1 || sdk_g_ic.s._unknown30d > 14) {
sdk_g_ic.s._unknown30d = 1;
}
if (sdk_g_ic.s._unknown544 < 100 || sdk_g_ic.s._unknown544 > 60000) {
sdk_g_ic.s._unknown544 = 100;
}
if (sdk_g_ic.s._unknown30e == 1 || sdk_g_ic.s._unknown30e > 4) {
sdk_g_ic.s._unknown30e = 0;
}
bzero(sdk_g_ic.s._unknown2ac, sizeof(sdk_g_ic.s._unknown2ac));
if (sdk_g_ic.s._unknown30f > 1) {
sdk_g_ic.s._unknown30f = 0;
}
if (sdk_g_ic.s._unknown310 > 4) {
sdk_g_ic.s._unknown310 = 4;
}
if (sdk_g_ic.s.sta_ssid.ssid_length == 0xffffffff) {
bzero(&sdk_g_ic.s.sta_ssid, sizeof(sdk_g_ic.s.sta_ssid));
bzero(&sdk_g_ic.s.sta_password, sizeof(sdk_g_ic.s.sta_password));
}
sdk_g_ic.s.wifi_led_enable = 0;
if (sdk_g_ic.s.sta_bssid_set > 1) {
sdk_g_ic.s.sta_bssid_set = 0;
}
if (sdk_g_ic.s.ap_number > 5) {
sdk_g_ic.s.ap_number = 1;
}
if (sdk_g_ic.s.phy_mode < 1 || sdk_g_ic.s.phy_mode > 3) {
sdk_g_ic.s.phy_mode = PHY_MODE_11N;
}
}
// .irom0.text+0x398
void sdk_wdt_init(void) {
WDT.CTRL &= ~WDT_CTRL_ENABLE;
DPORT.INT_ENABLE |= DPORT_INT_ENABLE_WDT;
WDT.REG1 = 0x0000000b;
WDT.REG2 = 0x0000000c;
WDT.CTRL |= WDT_CTRL_FLAG3 | WDT_CTRL_FLAG4 | WDT_CTRL_FLAG5;
WDT.CTRL = SET_FIELD(WDT.CTRL, WDT_CTRL_FIELD0, 0);
WDT.CTRL |= WDT_CTRL_ENABLE;
sdk_pp_soft_wdt_init();
}
extern void *xPortSupervisorStackPointer;
// .irom0.text+0x474
void sdk_user_init_task(void *params) {
int phy_ver, pp_ver;
/* The start up stack is not used after scheduling has started, so all of
* the top area of RAM which was stack can be used for the dynamic heap. */
xPortSupervisorStackPointer = (void *)0x40000000;
sdk_ets_timer_init();
printf("\nESP-Open-SDK ver: %s compiled @ %s %s\n", OS_VERSION_STR, __DATE__, __TIME__);
phy_ver = RTCMEM_BACKUP[RTCMEM_BACKUP_PHY_VER] >> 16;
printf("phy ver: %d, ", phy_ver);
pp_ver = RTCMEM_SYSTEM[RTCMEM_SYSTEM_PP_VER];
printf("pp ver: %d.%d\n\n", (pp_ver >> 8) & 0xff, pp_ver & 0xff);
user_init();
sdk_user_init_flag = 1;
sdk_wifi_mode_set(sdk_g_ic.s.wifi_mode);
if (sdk_g_ic.s.wifi_mode == STATION_MODE) {
sdk_wifi_station_start();
netif_set_default(sdk_g_ic.v.station_netif_info->netif);
}
if (sdk_g_ic.s.wifi_mode == SOFTAP_MODE) {
sdk_wifi_softap_start();
netif_set_default(sdk_g_ic.v.softap_netif_info->netif);
}
if (sdk_g_ic.s.wifi_mode == STATIONAP_MODE) {
sdk_wifi_station_start();
sdk_wifi_softap_start();
netif_set_default(sdk_g_ic.v.station_netif_info->netif);
}
if (sdk_wifi_station_get_auto_connect()) {
sdk_wifi_station_connect();
}
vTaskDelete(NULL);
}
extern void (*__init_array_start)(void);
extern void (*__init_array_end)(void);
// .Lfunc009 -- .irom0.text+0x5b4
static __attribute__((noinline)) void user_start_phase2(void) {
uint8_t *buf;
sdk_phy_info_t phy_info, default_phy_info;
sdk_system_rtc_mem_read(0, &sdk_rst_if, sizeof(sdk_rst_if));
if (sdk_rst_if.reason > 3) {
// Bad reason. Probably garbage.
bzero(&sdk_rst_if, sizeof(sdk_rst_if));
}
buf = malloc(sizeof(sdk_rst_if));
bzero(buf, sizeof(sdk_rst_if));
sdk_system_rtc_mem_write(0, buf, sizeof(sdk_rst_if));
free(buf);
sdk_sleep_reset_analog_rtcreg_8266();
get_otp_mac_address(sdk_info.sta_mac_addr);
sdk_wifi_softap_cacl_mac(sdk_info.softap_mac_addr, sdk_info.sta_mac_addr);
sdk_info.softap_ipaddr.addr = 0x0104a8c0; // 192.168.4.1
sdk_info.softap_netmask.addr = 0x00ffffff; // 255.255.255.0
sdk_info.softap_gw.addr = 0x0104a8c0; // 192.168.4.1
init_g_ic();
read_saved_phy_info(&phy_info);
get_default_phy_info(&default_phy_info);
if (phy_info.version != default_phy_info.version) {
/* Versions don't match, use default for PHY info
(may be a blank config sector, or a new default version.)
*/
memcpy(&phy_info, &default_phy_info, sizeof(sdk_phy_info_t));
}
// Disable default buffering on stdout
setbuf(stdout, NULL);
// Wait for UARTs to finish sending anything in their queues.
uart_flush_txfifo(0);
uart_flush_txfifo(1);
init_networking(&phy_info, sdk_info.sta_mac_addr);
srand(hwrand()); /* seed libc rng */
// Set intial CPU clock speed to 160MHz if necessary
_Static_assert(configCPU_CLOCK_HZ == 80000000 || configCPU_CLOCK_HZ == 160000000, "FreeRTOSConfig must define initial clock speed as either 80MHz or 160MHz");
sdk_system_update_cpu_freq(configCPU_CLOCK_HZ / 1000000);
// Call gcc constructor functions
void (**ctor)(void);
for ( ctor = &__init_array_start; ctor != &__init_array_end; ++ctor) {
(*ctor)();
}
tcpip_init(NULL, NULL);
sdk_wdt_init();
xTaskCreate(sdk_user_init_task, "uiT", 1024, 0, 14, &sdk_xUserTaskHandle);
vTaskStartScheduler();
}
// .Lfunc010 -- .irom0.text+0x710
static void dump_flash_sector(uint32_t start_sector, uint32_t length) {
uint8_t *buf;
int bufsize, i;
bufsize = (length + 3) & 0xfffc;
buf = malloc(bufsize);
sdk_spi_flash_read(start_sector * sdk_flashchip.sector_size, (uint32_t *)buf
, bufsize);
for (i = 0; i < length; i++) {
if ((i & 0xf) == 0) {
if (i) {
printf("\n");
}
printf("%04x:", i);
}
printf(" %02x", buf[i]);
}
printf("\n");
free(buf);
}
// .Lfunc011 -- .irom0.text+0x790
static __attribute__((noinline)) void dump_flash_config_sectors(uint32_t start_sector) {
printf("system param error\n");
// Note: original SDK code didn't dump PHY info
printf("phy_info:\n");
dump_flash_sector(start_sector, sizeof(sdk_phy_info_t));
printf("\ng_ic saved 0:\n");
dump_flash_sector(start_sector + 1, sizeof(struct sdk_g_ic_saved_st));
printf("\ng_ic saved 1:\n");
dump_flash_sector(start_sector + 2, sizeof(struct sdk_g_ic_saved_st));
printf("\nboot info:\n");
dump_flash_sector(start_sector + 3, BOOT_INFO_SIZE);
}
Reference in a new issue View git blame Copy permalink