esp-open-rtos/extras/irmp/irmp.h
2017-06-14 01:00:22 +02:00

261 lines
11 KiB
C

/*---------------------------------------------------------------------------------------------------------------------------------------------------
* irmp.h
*
* Copyright (c) 2009-2016 Frank Meyer - frank(at)fli4l.de
*
* $Id: irmp.h,v 1.103 2016/09/09 07:53:29 fm Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef _IRMP_H_
#define _IRMP_H_
#include "irmpsystem.h"
#ifndef IRMP_USE_AS_LIB
# include "irmpconfig.h"
#endif
#if defined (__AVR_XMEGA__)
# define _CONCAT(a,b) a##b
# define CONCAT(a,b) _CONCAT(a,b)
# define IRMP_PORT_PRE CONCAT(PORT, IRMP_PORT_LETTER)
# define IRMP_DDR_PRE CONCAT(PORT, IRMP_PORT_LETTER)
# define IRMP_PIN_PRE CONCAT(PORT, IRMP_PORT_LETTER)
# define IRMP_PORT IRMP_PORT_PRE.OUT
# define IRMP_DDR IRMP_DDR_PRE.DIR
# define IRMP_PIN IRMP_PIN_PRE.IN
# define IRMP_BIT IRMP_BIT_NUMBER
# define input(x) ((x) & (1 << IRMP_BIT))
#elif defined (ATMEL_AVR)
# define _CONCAT(a,b) a##b
# define CONCAT(a,b) _CONCAT(a,b)
# define IRMP_PORT CONCAT(PORT, IRMP_PORT_LETTER)
# define IRMP_DDR CONCAT(DDR, IRMP_PORT_LETTER)
# define IRMP_PIN CONCAT(PIN, IRMP_PORT_LETTER)
# define IRMP_BIT IRMP_BIT_NUMBER
# define input(x) ((x) & (1 << IRMP_BIT))
#elif defined (PIC_C18) || defined (PIC_CCS)
# define input(x) (x)
#elif defined (ARM_STM32)
# define _CONCAT(a,b) a##b
# define CONCAT(a,b) _CONCAT(a,b)
# define IRMP_PORT CONCAT(GPIO, IRMP_PORT_LETTER)
# if defined (ARM_STM32L1XX)
# define IRMP_PORT_RCC CONCAT(RCC_AHBPeriph_GPIO, IRMP_PORT_LETTER)
# elif defined (ARM_STM32F10X)
# define IRMP_PORT_RCC CONCAT(RCC_APB2Periph_GPIO, IRMP_PORT_LETTER)
# elif defined (ARM_STM32F4XX)
# define IRMP_PORT_RCC CONCAT(RCC_AHB1Periph_GPIO, IRMP_PORT_LETTER)
# endif
# define IRMP_BIT CONCAT(GPIO_Pin_, IRMP_BIT_NUMBER)
# define IRMP_PIN IRMP_PORT // for use with input(x) below
# define input(x) (GPIO_ReadInputDataBit(x, IRMP_BIT))
# ifndef USE_STDPERIPH_DRIVER
# warning The STM32 port of IRMP uses the ST standard peripheral drivers which are not enabled in your build configuration.
# endif
#elif defined (STELLARIS_ARM_CORTEX_M4)
# define _CONCAT(a,b) a##b
# define CONCAT(a,b) _CONCAT(a,b)
# define IRMP_PORT_PERIPH CONCAT(SYSCTL_PERIPH_GPIO, IRMP_PORT_LETTER)
# define IRMP_PORT_BASE CONCAT(GPIO_PORT, CONCAT(IRMP_PORT_LETTER, _BASE))
# define IRMP_PORT_PIN CONCAT(GPIO_PIN_, IRMP_BIT_NUMBER)
# define IRMP_PIN IRMP_PORT_PIN
# define input(x) ((uint8_t)(ROM_GPIOPinRead(IRMP_PORT_BASE, IRMP_PORT_PIN)))
# define sei() IntMasterEnable()
#elif defined(__SDCC_stm8)
# define _CONCAT(a,b) a##b
# define CONCAT(a,b) _CONCAT(a,b)
# define IRMP_GPIO_STRUCT CONCAT(GPIO, IRMP_PORT_LETTER)
# define IRMP_BIT IRMP_BIT_NUMBER
# define input(x) ((x) & (1 << IRMP_BIT))
#elif defined (TEENSY_ARM_CORTEX_M4)
# define input(x) ((uint8_t)(digitalReadFast(x)))
#elif defined(__xtensa__)
# define IRMP_BIT IRMP_BIT_NUMBER
# define input(x) GPIO_INPUT_GET(IRMP_BIT_NUMBER)
#endif
#if IRMP_SUPPORT_TECHNICS_PROTOCOL == 1
# undef IRMP_SUPPORT_MATSUSHITA_PROTOCOL
# define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1
#endif
#if IRMP_SUPPORT_DENON_PROTOCOL == 1 && IRMP_SUPPORT_RUWIDO_PROTOCOL == 1
# warning DENON protocol conflicts wih RUWIDO, please enable only one of both protocols
# warning RUWIDO protocol disabled
# undef IRMP_SUPPORT_RUWIDO_PROTOCOL
# define IRMP_SUPPORT_RUWIDO_PROTOCOL 0
#endif
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1 && IRMP_SUPPORT_PANASONIC_PROTOCOL == 1
# warning KASEIKYO protocol conflicts wih PANASONIC, please enable only one of both protocols
# warning PANASONIC protocol disabled
# undef IRMP_SUPPORT_PANASONIC_PROTOCOL
# define IRMP_SUPPORT_PANASONIC_PROTOCOL 0
#endif
#if IRMP_SUPPORT_DENON_PROTOCOL == 1 && IRMP_SUPPORT_ACP24_PROTOCOL == 1
# warning DENON protocol conflicts wih ACP24, please enable only one of both protocols
# warning ACP24 protocol disabled
# undef IRMP_SUPPORT_ACP24_PROTOCOL
# define IRMP_SUPPORT_ACP24_PROTOCOL 0
#endif
#if IRMP_SUPPORT_RC6_PROTOCOL == 1 && IRMP_SUPPORT_ROOMBA_PROTOCOL == 1
# warning RC6 protocol conflicts wih ROOMBA, please enable only one of both protocols
# warning ROOMBA protocol disabled
# undef IRMP_SUPPORT_ROOMBA_PROTOCOL
# define IRMP_SUPPORT_ROOMBA_PROTOCOL 0
#endif
#if IRMP_SUPPORT_PANASONIC_PROTOCOL == 1 && IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
# warning PANASONIC protocol conflicts wih MITSU_HEAVY, please enable only one of both protocols
# warning MITSU_HEAVY protocol disabled
# undef IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL
# define IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL 0
#endif
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_ORTEK_PROTOCOL == 1
# warning RC5 protocol conflicts wih ORTEK, please enable only one of both protocols
# warning ORTEK protocol disabled
# undef IRMP_SUPPORT_ORTEK_PROTOCOL
# define IRMP_SUPPORT_ORTEK_PROTOCOL 0
#endif
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_S100_PROTOCOL == 1
# warning RC5 protocol conflicts wih S100, please enable only one of both protocols
# warning S100 protocol disabled
# undef IRMP_SUPPORT_S100_PROTOCOL
# define IRMP_SUPPORT_S100_PROTOCOL 0
#endif
#if IRMP_SUPPORT_NUBERT_PROTOCOL == 1 && IRMP_SUPPORT_FAN_PROTOCOL == 1
# warning NUBERT protocol conflicts wih FAN, please enable only one of both protocols
# warning FAN protocol disabled
# undef IRMP_SUPPORT_FAN_PROTOCOL
# define IRMP_SUPPORT_FAN_PROTOCOL 0
#endif
#if IRMP_SUPPORT_FDC_PROTOCOL == 1 && IRMP_SUPPORT_ORTEK_PROTOCOL == 1
# warning FDC protocol conflicts wih ORTEK, please enable only one of both protocols
# warning ORTEK protocol disabled
# undef IRMP_SUPPORT_ORTEK_PROTOCOL
# define IRMP_SUPPORT_ORTEK_PROTOCOL 0
#endif
#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1 && IRMP_SUPPORT_NETBOX_PROTOCOL == 1
# warning ORTEK protocol conflicts wih NETBOX, please enable only one of both protocols
# warning NETBOX protocol disabled
# undef IRMP_SUPPORT_NETBOX_PROTOCOL
# define IRMP_SUPPORT_NETBOX_PROTOCOL 0
#endif
#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 && F_INTERRUPTS < 15000
# warning F_INTERRUPTS too low, SIEMENS protocol disabled (should be at least 15000)
# undef IRMP_SUPPORT_SIEMENS_PROTOCOL
# define IRMP_SUPPORT_SIEMENS_PROTOCOL 0
#endif
#if IRMP_SUPPORT_RUWIDO_PROTOCOL == 1 && F_INTERRUPTS < 15000
# warning F_INTERRUPTS too low, RUWIDO protocol disabled (should be at least 15000)
# undef IRMP_SUPPORT_RUWIDO_PROTOCOL
# define IRMP_SUPPORT_RUWIDO_PROTOCOL 0
#endif
#if IRMP_SUPPORT_RECS80_PROTOCOL == 1 && F_INTERRUPTS < 15000
# warning F_INTERRUPTS too low, RECS80 protocol disabled (should be at least 15000)
# undef IRMP_SUPPORT_RECS80_PROTOCOL
# define IRMP_SUPPORT_RECS80_PROTOCOL 0
#endif
#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1 && F_INTERRUPTS < 15000
# warning F_INTERRUPTS too low, RECS80EXT protocol disabled (should be at least 15000)
# undef IRMP_SUPPORT_RECS80EXT_PROTOCOL
# define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0
#endif
#if IRMP_SUPPORT_LEGO_PROTOCOL == 1 && F_INTERRUPTS < 20000
# warning F_INTERRUPTS too low, LEGO protocol disabled (should be at least 20000)
# undef IRMP_SUPPORT_LEGO_PROTOCOL
# define IRMP_SUPPORT_LEGO_PROTOCOL 0
#endif
#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1 && IRMP_SUPPORT_SAMSUNG_PROTOCOL == 0
# warning SAMSUNG48 protocol needs also SAMSUNG protocol, SAMSUNG protocol enabled
# undef IRMP_SUPPORT_SAMSUNG_PROTOCOL
# define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1
#endif
#if IRMP_SUPPORT_JVC_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
# warning JVC protocol needs also NEC protocol, NEC protocol enabled
# undef IRMP_SUPPORT_NEC_PROTOCOL
# define IRMP_SUPPORT_NEC_PROTOCOL 1
#endif
#if IRMP_SUPPORT_NEC16_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
# warning NEC16 protocol needs also NEC protocol, NEC protocol enabled
# undef IRMP_SUPPORT_NEC_PROTOCOL
# define IRMP_SUPPORT_NEC_PROTOCOL 1
#endif
#if IRMP_SUPPORT_NEC42_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
# warning NEC42 protocol needs also NEC protocol, NEC protocol enabled
# undef IRMP_SUPPORT_NEC_PROTOCOL
# define IRMP_SUPPORT_NEC_PROTOCOL 1
#endif
#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1 && IRMP_SUPPORT_NEC_PROTOCOL == 0
# warning LGAIR protocol needs also NEC protocol, NEC protocol enabled
# undef IRMP_SUPPORT_NEC_PROTOCOL
# define IRMP_SUPPORT_NEC_PROTOCOL 1
#endif
#if IRMP_SUPPORT_RCMM_PROTOCOL == 1 && F_INTERRUPTS < 20000
# warning F_INTERRUPTS too low, RCMM protocol disabled (should be at least 20000)
# undef IRMP_SUPPORT_RCMM_PROTOCOL
# define IRMP_SUPPORT_RCMM_PROTOCOL 0
#endif
#if F_INTERRUPTS > 20000
#error F_INTERRUPTS too high (should be not greater than 20000)
#endif
#include "irmpprotocols.h"
#define IRMP_FLAG_REPETITION 0x01
#ifdef __cplusplus
extern "C"
{
#endif
extern void irmp_init (void);
extern uint_fast8_t irmp_get_data (IRMP_DATA *);
extern uint_fast8_t irmp_ISR (void);
#if IRMP_PROTOCOL_NAMES == 1
extern const char * const irmp_protocol_names[IRMP_N_PROTOCOLS + 1] PROGMEM;
#endif
#if IRMP_USE_CALLBACK == 1
extern void irmp_set_callback_ptr (void (*cb)(uint_fast8_t));
#endif // IRMP_USE_CALLBACK == 1
#ifdef __cplusplus
}
#endif
#endif /* _IRMP_H_ */