116 lines
3.3 KiB
C
116 lines
3.3 KiB
C
/* esp/registers.h
|
|
*
|
|
* ESP8266 register addresses and bitmasks.
|
|
*
|
|
* Not compatible with ESP SDK register access code.
|
|
*
|
|
* Based on register map documentation:
|
|
* https://github.com/esp8266/esp8266-wiki/wiki/Memory-Map
|
|
*
|
|
* Part of esp-open-rtos
|
|
* Copyright (C) 2015 Superhouse Automation Pty Ltd
|
|
* BSD Licensed as described in the file LICENSE
|
|
*/
|
|
#ifndef _ESP_REGISTERS
|
|
#define _ESP_REGISTERS
|
|
#include "common_macros.h"
|
|
|
|
typedef volatile uint32_t *esp_reg_t;
|
|
|
|
/* Register base addresses
|
|
|
|
You shouldn't need to use these directly.
|
|
*/
|
|
#define MMIO_BASE 0x60000000
|
|
|
|
#define UART0_BASE (MMIO_BASE + 0)
|
|
#define SPI1_BASE (MMIO_BASE + 0x0100)
|
|
#define SPI_BASE (MMIO_BASE + 0x0200)
|
|
#define GPIO0_BASE (MMIO_BASE + 0x0300)
|
|
#define TIMER_BASE (MMIO_BASE + 0x0600)
|
|
#define RTC_BASE (MMIO_BASE + 0x0700)
|
|
#define IOMUX_BASE (MMIO_BASE + 0x0800)
|
|
#define WDT_BASE (MMIO_BASE + 0x0900)
|
|
#define I2C_BASE (MMIO_BASE + 0x0d00)
|
|
#define UART1_BASE (MMIO_BASE + 0x0F00)
|
|
#define RTCB_BASE (MMIO_BASE + 0x1000)
|
|
#define RTCS_BASE (MMIO_BASE + 0x1100)
|
|
#define RTCU_BASE (MMIO_BASE + 0x1200)
|
|
|
|
/*
|
|
* iomux registers, apply to pin functions.
|
|
*
|
|
* Note that IOMUX register order is _not_ the same as GPIO order. See
|
|
* esp_iomux.h for programmer-friendly IOMUX configuration options
|
|
*/
|
|
#define IOMUX_REG(X) *(esp_reg_t)(IOMUX_BASE+4*(X+1))
|
|
|
|
#define IOMUX_OE BIT(0) /* iomux Output enable bit */
|
|
#define IOMUX_OE_SLEEP BIT(1) /* iomux Output during sleep bit */
|
|
|
|
#define IOMUX_PD BIT(6) /* iomux soft pulldown bit */
|
|
#define IOMUX_PD_SLEEP BIT(2) /* iomux soft pulldown during sleep bit */
|
|
#define IOMUX_PU BIT(7) /* iomux soft pullup bit */
|
|
#define IOMUX_PU_SLEEP BIT(3) /* iomux soft pullup during sleep bit */
|
|
|
|
#define IOMUX_FLAG_WAKE_MASK (IOMUX_OE|IOMUX_PD|IOMUX_PU)
|
|
#define IOMUX_FLAG_SLEEP_MASK (IOMUX_OE_SLEEP|IOMUX_PD_SLEEP|IOMUX_PU_SLEEP)
|
|
#define IOMUX_FLAG_MASK (IOMUX_FLAG_WAKE_MASK|IOMUX_FLAG_SLEEP_MASK)
|
|
|
|
#define IOMUX_FUNC_MASK (BIT(4)|BIT(5)|BIT(12))
|
|
|
|
/* All pins have FUNC_A on reset (unconfirmed) */
|
|
#define IOMUX_FUNC_A (0)
|
|
#define IOMUX_FUNC_B BIT(4)
|
|
#define IOMUX_FUNC_C BIT(5)
|
|
#define IOMUX_FUNC_D BIT(4)|BIT(5)
|
|
#define IOMUX_FUNC_E BIT(12)
|
|
|
|
|
|
/*
|
|
* Based on descriptions by mamalala at https://github.com/esp8266/esp8266-wiki/wiki/gpio-registers
|
|
*/
|
|
|
|
/** GPIO OUTPUT registers GPIO_OUT_REG, GPIO_OUT_SET, GPIO_OUT_CLEAR
|
|
*
|
|
* Registers for pin outputs.
|
|
*
|
|
* _SET and _CLEAR write-only registers set and clear bits in _REG,
|
|
* respectively.
|
|
*
|
|
* ie
|
|
* GPIO_OUT_REG |= BIT(3);
|
|
* and
|
|
* GPIO_OUT_SET = BIT(3);
|
|
*
|
|
* ... are equivalent, but latter uses less CPU cycles.
|
|
*/
|
|
#define GPIO_OUT_REG *(esp_reg_t)(GPIO0_BASE)
|
|
#define GPIO_OUT_SET *(esp_reg_t)(GPIO0_BASE+0x04)
|
|
#define GPIO_OUT_CLEAR *(esp_reg_t)(GPIO0_BASE+0x08)
|
|
|
|
/* GPIO DIR registers GPIO_DIR_REG, GPIO_DIR_SET, GPIO_DIR_CLEAR
|
|
*
|
|
* Set bit in DIR register for output pins. Writing to _SET and _CLEAR
|
|
* registers set and clear bits in _REG, respectively.
|
|
*/
|
|
#define GPIO_DIR_REG *(esp_reg_t)(GPIO0_BASE+0x0C)
|
|
#define GPIO_DIR_SET *(esp_reg_t)(GPIO0_BASE+0x10)
|
|
#define GPIO_DIR_CLEAR *(esp_reg_t)(GPIO0_BASE+0x14)
|
|
|
|
/* GPIO IN register GPIO_IN_REG
|
|
*
|
|
* Reads current input values.
|
|
*/
|
|
#define GPIO_IN_REG *(esp_reg_t)(GPIO0_BASE+0x18)
|
|
|
|
|
|
/* WDT register(s)
|
|
|
|
Not fully understood yet. Writing 0 here disables wdt.
|
|
|
|
See ROM functions esp_wdt_xxx
|
|
*/
|
|
#define WDT_CTRL *(esp_reg_t)(WDT_BASE)
|
|
|
|
#endif
|