106 lines
3.3 KiB
C
106 lines
3.3 KiB
C
/**
|
|
* Simple example with one CCS811 sensor connected to I2C bus 0 and one SHT3x
|
|
* sensor to determine ambient temperature. New data are fetched peridically.
|
|
*
|
|
* Harware configuration:
|
|
*
|
|
* +------------------------+ +--------+
|
|
* | ESP8266 Bus 0 | | CCS811 |
|
|
* | GPIO 5 (SCL) >--+----> SCL |
|
|
* | GPIO 4 (SDA) ---|-+--- SDA |
|
|
* | GND ---|-|--> /WAKE |
|
|
* | | | | +--------+
|
|
* | | | | | SHT3x |
|
|
* | | +----> SCL |
|
|
* | | +--- SDA |
|
|
* +------------------------+ +--------+
|
|
*/
|
|
|
|
#include "espressif/esp_common.h"
|
|
#include "esp/uart.h"
|
|
#include "i2c/i2c.h"
|
|
|
|
#include "FreeRTOS.h"
|
|
#include <task.h>
|
|
|
|
// include CCS811 driver
|
|
#include "ccs811/ccs811.h"
|
|
|
|
// include SHT3x driver
|
|
#include "sht3x/sht3x.h"
|
|
|
|
// define I2C interfaces at which CCS811 and SHT3x sensors are connected
|
|
#define I2C_BUS 0
|
|
#define I2C_SCL_PIN 5
|
|
#define I2C_SDA_PIN 4
|
|
|
|
static ccs811_sensor_t* ccs811; // CCS811 device data structure
|
|
static sht3x_sensor_t* sht3x; // SHT3x device data structure
|
|
|
|
/*
|
|
* User task that fetches the sensor values every 2 seconds.
|
|
*/
|
|
void user_task(void *pvParameters)
|
|
{
|
|
uint16_t tvoc;
|
|
uint16_t eco2;
|
|
|
|
float temperature;
|
|
float humidity;
|
|
|
|
// start periodic measurement with 1 measurement per second
|
|
ccs811_set_mode (ccs811, ccs811_mode_1s);
|
|
|
|
// start periodic measurements with 1 measurement per second
|
|
sht3x_start_measurement (sht3x, sht3x_periodic_1mps, sht3x_high);
|
|
|
|
// passive waiting until measurement results are available
|
|
vTaskDelay (sht3x_get_measurement_duration (sht3x_high));
|
|
|
|
TickType_t last_wakeup = xTaskGetTickCount();
|
|
|
|
while (1)
|
|
{
|
|
// get the results from CCS811 and do something with them
|
|
if (ccs811_get_results (ccs811, &tvoc, &eco2, 0, 0))
|
|
printf("%.3f CCS811 Sensor periodic: TVOC %d ppb, eCO2 %d ppm\n",
|
|
(double)sdk_system_get_time()*1e-3, tvoc, eco2);
|
|
|
|
// get the values from SHT3x and do something with them
|
|
if (sht3x_get_results (sht3x, &temperature, &humidity))
|
|
{
|
|
printf("%.3f SHT3x Sensor: %.2f °C, %.2f %%\n",
|
|
(double)sdk_system_get_time()*1e-3, temperature, humidity);
|
|
|
|
// set CCS811 environmental data with values fetched from SHT3x
|
|
ccs811_set_environmental_data (ccs811, temperature, humidity);
|
|
}
|
|
// passive waiting until 2 seconds is over
|
|
vTaskDelayUntil(&last_wakeup, 2000 / portTICK_PERIOD_MS);
|
|
}
|
|
}
|
|
|
|
|
|
void user_init(void)
|
|
{
|
|
// set UART Parameter
|
|
uart_set_baud(0, 115200);
|
|
// give the UART some time to settle
|
|
sdk_os_delay_us(500);
|
|
|
|
/** -- MANDATORY PART -- */
|
|
|
|
// init all I2C bus interfaces at which CCS811 sensors are connected
|
|
i2c_init(I2C_BUS, I2C_SCL_PIN, I2C_SDA_PIN, I2C_FREQ_100K);
|
|
|
|
// longer clock stretching is required for CCS811
|
|
i2c_set_clock_stretch (I2C_BUS, CCS811_I2C_CLOCK_STRETCH);
|
|
|
|
// init the sensors
|
|
ccs811 = ccs811_init_sensor (I2C_BUS, CCS811_I2C_ADDRESS_1);
|
|
sht3x = sht3x_init_sensor (I2C_BUS, SHT3x_ADDR_2);
|
|
|
|
if (ccs811 && sht3x)
|
|
// create a task that uses the sensor
|
|
xTaskCreate(user_task, "user_task", 256, NULL, 2, NULL);
|
|
}
|