126 lines
4 KiB
C
126 lines
4 KiB
C
/*
|
|
* Example of using INA3221
|
|
*
|
|
* Part of esp-open-rtos
|
|
* Copyright (C) 2016 Zaltora
|
|
* MIT Licensed as described in the file LICENSE
|
|
*/
|
|
|
|
#include "espressif/esp_common.h"
|
|
#include "FreeRTOS.h"
|
|
#include "task.h"
|
|
#include <esp/uart.h>
|
|
#include <stdbool.h>
|
|
#include "ina3221/ina3221.h"
|
|
|
|
#define PIN_SCL 5
|
|
#define PIN_SDA 2
|
|
#define ADDR INA3221_ADDR_0
|
|
|
|
#define WARNING_CHANNEL 1
|
|
#define WARNING_CURRENT (40.0)
|
|
|
|
//#define STRUCT_SETTING 0
|
|
#define MODE false // true : continuous measurements // false : trigger measurements
|
|
|
|
void ina_measure(void *pvParameters)
|
|
{
|
|
uint32_t measure_number = 0;
|
|
float bus_voltage;
|
|
float shunt_voltage;
|
|
float shunt_current;
|
|
bool warning = false ;
|
|
|
|
// Create ina3221 device
|
|
ina3221_t dev = {
|
|
.addr = ADDR,
|
|
.shunt = { 100 ,100 ,100 }, // shunt values are 100 mOhm for each channel
|
|
.mask.mask_register = INA3221_DEFAULT_MASK, // Init
|
|
.config.config_register = INA3221_DEFAULT_CONFIG, // Init
|
|
};
|
|
|
|
#ifndef STRUCT_SETTING
|
|
if(ina3221_setting(&dev ,MODE, true, true)) // mode selection , bus and shunt activated
|
|
goto error_loop;
|
|
if(ina3221_enableChannel(&dev , true, true, true)) // Enable all channels
|
|
goto error_loop;
|
|
if(ina3221_setAverage(&dev, INA3221_AVG_64)) // 64 samples average
|
|
goto error_loop;
|
|
if(ina3221_setBusConversionTime(&dev, INA3221_CT_2116)) // 2ms by channel
|
|
goto error_loop;
|
|
if(ina3221_setShuntConversionTime(&dev, INA3221_CT_2116)) // 2ms by channel
|
|
goto error_loop;
|
|
#else
|
|
dev.config.mode = MODE; // mode selection
|
|
dev.config.esht = true; // shunt enable
|
|
dev.config.ebus = true; // bus enable
|
|
dev.config.ch1 = true; // channel 1 enable
|
|
dev.config.ch2 = true; // channel 2 enable
|
|
dev.config.ch3 = true; // channel 3 enable
|
|
dev.config.avg = INA3221_AVG_64; // 64 samples average
|
|
dev.config.vbus = INA3221_CT_2116; // 2ms by channel (bus)
|
|
dev.config.vsht = INA3221_CT_2116; // 2ms by channel (shunt)
|
|
if(ina3221_sync(&dev))
|
|
goto error_loop;
|
|
#endif
|
|
|
|
ina3221_setWarningAlert(&dev, WARNING_CHANNEL-1, WARNING_CURRENT); //Set security flag overcurrent
|
|
|
|
while(1)
|
|
{
|
|
measure_number++;
|
|
#if !MODE
|
|
if (ina3221_trigger(&dev)) // Start a measure
|
|
goto error_loop;
|
|
printf("trig done, wait: ");
|
|
do
|
|
{
|
|
printf("X");
|
|
if (ina3221_getStatus(&dev)) // get mask
|
|
goto error_loop;
|
|
vTaskDelay(20/portTICK_PERIOD_MS);
|
|
if(dev.mask.wf&(1<<(3-WARNING_CHANNEL)))
|
|
warning = true ;
|
|
} while(!(dev.mask.cvrf)); // check if measure done
|
|
#else
|
|
if (ina3221_getStatus(&dev)) // get mask
|
|
goto error_loop;
|
|
if(dev.mask.wf&(1<<(3-WARNING_CHANNEL)))
|
|
warning = true ;
|
|
#endif
|
|
for (uint8_t i = 0 ; i < BUS_NUMBER ; i++)
|
|
{
|
|
if(ina3221_getBusVoltage(&dev, i, &bus_voltage)) // Get voltage in V
|
|
goto error_loop;
|
|
if(ina3221_getShuntValue(&dev, i, &shunt_voltage, &shunt_current)) // Get voltage in mV and currant in mA
|
|
goto error_loop;
|
|
|
|
printf("\nC%u:Measure number %u\n",i+1,measure_number);
|
|
if (warning && (i+1) == WARNING_CHANNEL) printf("C%u:Warning Current > %.2f mA !!\n",i+1,WARNING_CURRENT);
|
|
printf("C%u:Bus voltage: %.02f V\n",i+1,bus_voltage );
|
|
printf("C%u:Shunt voltage: %.02f mV\n",i+1,shunt_voltage );
|
|
printf("C%u:Shunt current: %.02f mA\n\n",i+1,shunt_current );
|
|
|
|
}
|
|
warning = false ;
|
|
vTaskDelay(5000/portTICK_PERIOD_MS);
|
|
}
|
|
|
|
error_loop:
|
|
printf("%s: error while com with INA3221\n", __func__);
|
|
for(;;)
|
|
{
|
|
vTaskDelay(2000/portTICK_PERIOD_MS);
|
|
printf("%s: error loop\n", __FUNCTION__);
|
|
}
|
|
}
|
|
|
|
void user_init(void)
|
|
{
|
|
uart_set_baud(0, 115200);
|
|
printf("SDK version:%s\n", sdk_system_get_sdk_version());
|
|
|
|
i2c_init(PIN_SCL,PIN_SDA);
|
|
|
|
xTaskCreate(ina_measure, "Measurements_task", 512, NULL, 2, NULL);
|
|
}
|