268 lines
8 KiB
C
268 lines
8 KiB
C
/**
|
|
* Simple example with one sensor connected to I2C or SPI. It demonstrates the
|
|
* different approaches to fetch the data. Either one of the interrupt signals
|
|
* is used or new data are fetched periodically.
|
|
*
|
|
* Harware configuration:
|
|
*
|
|
* I2C
|
|
*
|
|
* +-----------------+ +----------+
|
|
* | ESP8266 / ESP32 | | LIS3MDL |
|
|
* | | | |
|
|
* | GPIO 14 (SCL) ----> SCL |
|
|
* | GPIO 13 (SDA) <---> SDA |
|
|
* | GPIO 5 <---- INT |
|
|
* | GPIO 4 <---- DRDY |
|
|
* +-----------------+ +----------+
|
|
*
|
|
* SPI
|
|
*
|
|
* +-----------------+ +----------+ +-----------------+ +----------+
|
|
* | ESP8266 | | LIS3MDL | | ESP32 | | LIS3MDL |
|
|
* | | | | | | | |
|
|
* | GPIO 14 (SCK) ----> SCK | | GPIO 16 (SCK) ----> SCK |
|
|
* | GPIO 13 (MOSI)----> SDI | | GPIO 17 (MOSI)----> SDI |
|
|
* | GPIO 12 (MISO)<---- SDO | | GPIO 18 (MISO)<---- SDO |
|
|
* | GPIO 2 (CS) ----> CS | | GPIO 19 (CS) ----> CS |
|
|
* | GPIO 5 <---- INT | | GPIO 5 <---- INT |
|
|
* | GPIO 4 <---- DRDY | | GPIO 4 <---- DRDY |
|
|
* +-----------------+ +---------+ +-----------------+ +----------+
|
|
*/
|
|
|
|
/* -- use following constants to define the example mode ----------- */
|
|
|
|
// #define SPI_USED // if defined SPI is used, otherwise I2C
|
|
// #define INT_DATA // data ready interrupt used
|
|
// #define INT_THRESH // threshold interrupt used
|
|
|
|
#if defined(INT_DATA) || defined(INT_THRESH)
|
|
#define INT_USED
|
|
#endif
|
|
|
|
/* -- includes ----------------------------------------------------- */
|
|
|
|
#include "lis3mdl.h"
|
|
|
|
/** -- platform dependent definitions ------------------------------ */
|
|
|
|
#ifdef ESP_PLATFORM // ESP32 (ESP-IDF)
|
|
|
|
// user task stack depth for ESP32
|
|
#define TASK_STACK_DEPTH 2048
|
|
|
|
// SPI interface definitions for ESP32
|
|
#define SPI_BUS HSPI_HOST
|
|
#define SPI_SCK_GPIO 16
|
|
#define SPI_MOSI_GPIO 17
|
|
#define SPI_MISO_GPIO 18
|
|
#define SPI_CS_GPIO 19
|
|
|
|
#else // ESP8266 (esp-open-rtos)
|
|
|
|
// user task stack depth for ESP8266
|
|
#define TASK_STACK_DEPTH 256
|
|
|
|
// SPI interface definitions for ESP8266
|
|
#define SPI_BUS 1
|
|
#define SPI_SCK_GPIO 14
|
|
#define SPI_MOSI_GPIO 13
|
|
#define SPI_MISO_GPIO 12
|
|
#define SPI_CS_GPIO 2 // GPIO 15, the default CS of SPI bus 1, can't be used
|
|
|
|
#endif // ESP_PLATFORM
|
|
|
|
// I2C interface defintions for ESP32 and ESP8266
|
|
#define I2C_BUS 0
|
|
#define I2C_SCL_PIN 14
|
|
#define I2C_SDA_PIN 13
|
|
#define I2C_FREQ I2C_FREQ_100K
|
|
|
|
// interrupt GPIOs defintions for ESP8266 and ESP32
|
|
#define PIN_INT 5
|
|
#define PIN_DRDY 4
|
|
|
|
/* -- user tasks --------------------------------------------------- */
|
|
|
|
static lis3mdl_sensor_t* sensor;
|
|
|
|
/**
|
|
* Common function used to get sensor data.
|
|
*/
|
|
void read_data ()
|
|
{
|
|
lis3mdl_float_data_t data;
|
|
|
|
if (lis3mdl_new_data (sensor) &&
|
|
lis3mdl_get_float_data (sensor, &data))
|
|
// max. full scale is +-16 g and best resolution is 1 mg, i.e. 5 digits
|
|
printf("%.3f LIS3MDL (xyz)[Gs] mx=%+7.3f my=%+7.3f mz=%+7.3f\n",
|
|
(double)sdk_system_get_time()*1e-3,
|
|
data.mx, data.my, data.mz);
|
|
}
|
|
|
|
|
|
#ifdef INT_USED
|
|
/**
|
|
* In this case, any of the possible interrupts on interrupt signal *INT1* is
|
|
* used to fetch the data.
|
|
*
|
|
* When interrupts are used, the user has to define interrupt handlers that
|
|
* either fetches the data directly or triggers a task which is waiting to
|
|
* fetch the data. In this example, the interrupt handler sends an event to
|
|
* a waiting task to trigger the data gathering.
|
|
*/
|
|
|
|
static QueueHandle_t gpio_evt_queue = NULL;
|
|
|
|
// User task that fetches the sensor values.
|
|
|
|
void user_task_interrupt (void *pvParameters)
|
|
{
|
|
uint8_t gpio_num;
|
|
|
|
while (1)
|
|
if (xQueueReceive(gpio_evt_queue, &gpio_num, portMAX_DELAY))
|
|
{
|
|
if (gpio_num == PIN_DRDY)
|
|
{
|
|
read_data ();
|
|
}
|
|
else if (gpio_num == PIN_INT)
|
|
{
|
|
lis3mdl_int_source_t int_src;
|
|
|
|
// get the source of the interrupt and reset INT signals
|
|
lis3mdl_get_int_source (sensor, &int_src);
|
|
|
|
// in case of DRDY interrupt or activity interrupt read one data sample
|
|
if (int_src.active)
|
|
read_data ();
|
|
}
|
|
}
|
|
}
|
|
|
|
// Interrupt handler which resumes user_task_interrupt on interrupt
|
|
|
|
void IRAM int_signal_handler (uint8_t gpio)
|
|
{
|
|
// send an event with GPIO to the interrupt user task
|
|
xQueueSendFromISR(gpio_evt_queue, &gpio, NULL);
|
|
}
|
|
|
|
#else // !INT_USED
|
|
|
|
/*
|
|
* In this example, user task fetches the sensor values every seconds.
|
|
*/
|
|
|
|
void user_task_periodic(void *pvParameters)
|
|
{
|
|
vTaskDelay (100/portTICK_PERIOD_MS);
|
|
|
|
while (1)
|
|
{
|
|
// read sensor data
|
|
read_data ();
|
|
|
|
// passive waiting until 1 second is over
|
|
vTaskDelay(100/portTICK_PERIOD_MS);
|
|
}
|
|
}
|
|
|
|
#endif // INT_USED
|
|
|
|
/* -- main program ------------------------------------------------- */
|
|
|
|
void user_init(void)
|
|
{
|
|
// Set UART Parameter.
|
|
uart_set_baud(0, 115200);
|
|
// Give the UART some time to settle
|
|
vTaskDelay(1);
|
|
|
|
/** -- MANDATORY PART -- */
|
|
|
|
#ifdef SPI_USED
|
|
|
|
// init the sensor connnected to SPI
|
|
spi_bus_init (SPI_BUS, SPI_SCK_GPIO, SPI_MISO_GPIO, SPI_MOSI_GPIO);
|
|
|
|
// init the sensor connected to SPI_BUS with SPI_CS_GPIO as chip select.
|
|
sensor = lis3mdl_init_sensor (SPI_BUS, 0, SPI_CS_GPIO);
|
|
|
|
#else
|
|
|
|
// init all I2C bus interfaces at which LIS3MDL sensors are connected
|
|
i2c_init (I2C_BUS, I2C_SCL_PIN, I2C_SDA_PIN, I2C_FREQ);
|
|
|
|
// init the sensor with slave address LIS3MDL_I2C_ADDRESS_2 connected to I2C_BUS.
|
|
sensor = lis3mdl_init_sensor (I2C_BUS, LIS3MDL_I2C_ADDRESS_2, 0);
|
|
|
|
#endif
|
|
|
|
if (sensor)
|
|
{
|
|
#ifdef INT_USED
|
|
|
|
/** --- INTERRUPT CONFIGURATION PART ---- */
|
|
|
|
// Interrupt configuration has to be done before the sensor is set
|
|
// into measurement mode to avoid losing interrupts
|
|
|
|
// create an event queue to send interrupt events from interrupt
|
|
// handler to the interrupt task
|
|
gpio_evt_queue = xQueueCreate(10, sizeof(uint8_t));
|
|
|
|
// configure interupt pins for *INT* and *DRDY* signals and set the interrupt handler
|
|
gpio_enable(PIN_INT , GPIO_INPUT);
|
|
gpio_enable(PIN_DRDY, GPIO_INPUT);
|
|
gpio_set_interrupt(PIN_INT , GPIO_INTTYPE_EDGE_POS, int_signal_handler);
|
|
gpio_set_interrupt(PIN_DRDY, GPIO_INTTYPE_EDGE_POS, int_signal_handler);
|
|
|
|
#endif // !defined(INT_USED)
|
|
|
|
// -- SENSOR CONFIGURATION PART ---
|
|
|
|
// Interrupt configuration has to be done before the sensor is set
|
|
// into measurement mode
|
|
|
|
#ifdef INT_THRESH
|
|
// enable threshold interrupts on INT1
|
|
lis3mdl_int_config_t int_config;
|
|
|
|
int_config.threshold = 1000;
|
|
int_config.x_enabled = true;
|
|
int_config.y_enabled = true;
|
|
int_config.z_enabled = true;
|
|
int_config.latch = true;
|
|
int_config.signal_level= lis3mdl_high_active;
|
|
|
|
lis3mdl_set_int_config (sensor, &int_config);
|
|
#endif // INT_THRESH
|
|
|
|
// LAST STEP: Finally set scale and mode to start measurements
|
|
lis3mdl_set_scale(sensor, lis3mdl_scale_4_Gs);
|
|
lis3mdl_set_mode (sensor, lis3mdl_lpm_10);
|
|
|
|
/** -- TASK CREATION PART --- */
|
|
|
|
// must be done last to avoid concurrency situations with the sensor
|
|
// configuration part
|
|
|
|
#ifdef INT_USED
|
|
|
|
// create a task that is triggered only in case of interrupts to fetch the data
|
|
xTaskCreate(user_task_interrupt, "user_task_interrupt", TASK_STACK_DEPTH, NULL, 2, NULL);
|
|
|
|
#else // INT_USED
|
|
|
|
// create a user task that fetches data from sensor periodically
|
|
xTaskCreate(user_task_periodic, "user_task_periodic", TASK_STACK_DEPTH, NULL, 2, NULL);
|
|
|
|
#endif
|
|
}
|
|
else
|
|
printf("Could not initialize LIS3MDL sensor\n");
|
|
}
|
|
|