/*--------------------------------------------------------------------------------------------------------------------------------------------------- * irmpconfig.h * * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H! * * Copyright (c) 2009-2016 Frank Meyer - frank(at)fli4l.de * Extensions for PIC 12F1820 W.Strobl 2014-07-20 * * $Id: irmpconfig.h,v 1.152 2017/02/17 09:13:06 fm Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef _IRMPCONFIG_H_ #define _IRMPCONFIG_H_ #ifndef _IRMP_H_ # error please include only irmp.h, not irmpconfig.h #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change F_INTERRUPTS if you change the number of interrupts per second, * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000 * A value above 15000 costs additional program space, absolute maximum value is 20000. * On PIC with XC8/C18 Compiler, use 15151 as the correct value. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef F_INTERRUPTS # define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000 #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change settings from 1 to 0 if you want to disable one or more decoders. * This saves program space. * * 1 enable decoder * 0 disable decoder * * The standard decoders are enabled per default. * Less common protocols are disabled here, you need to enable them manually. * * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required. * If you don't need RC5 when using FDC/RCCAR, you should disable RC5. * You cannot enable both DENON and RUWIDO, only enable one of them. *--------------------------------------------------------------------------------------------------------------------------------------------------- */ // typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space #define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes #define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE >= 10000 ~300 bytes #define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsg32 >= 10000 ~300 bytes #define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes // more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space #define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes #define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes #define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes #define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 0 // Matsushita >= 10000 ~50 bytes #define IRMP_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~250 bytes #define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes #define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes #define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes #define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes #define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes #define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes // exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space #define IRMP_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~150 bytes #define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes #define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes #define IRMP_SUPPORT_FAN_PROTOCOL 0 // FAN (ventilator) >= 10000 ~50 bytes #define IRMP_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER (~NUBERT) >= 10000 ~50 bytes #define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes #define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes #define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes #define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes #define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes #define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!) #define IRMP_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 ~150 bytes #define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes #define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5) #define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5) #define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes #define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes #define IRMP_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~300 bytes #define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes #define IRMP_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 ~150 bytes #define IRMP_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~300 bytes #define IRMP_SUPPORT_SAMSUNG48_PROTOCOL 0 // Samsung48 >= 10000 ~100 bytes (SAMSUNG must be enabled!) #define IRMP_SUPPORT_MERLIN_PROTOCOL 0 // Merlin >= 15000 (better 20000) ~300 bytes #define IRMP_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes #define IRMP_SUPPORT_S100_PROTOCOL 0 // S100 >= 10000 ~250 bytes #define IRMP_SUPPORT_ACP24_PROTOCOL 0 // ACP24 >= 10000 ~250 bytes #define IRMP_SUPPORT_TECHNICS_PROTOCOL 0 // TECHNICS >= 10000 ~250 bytes #define IRMP_SUPPORT_PANASONIC_PROTOCOL 0 // PANASONIC Beamer >= 10000 ~250 bytes #define IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL 0 // Mitsubishi Aircond >= 10000 ~250 bytes #define IRMP_SUPPORT_VINCENT_PROTOCOL 0 // VINCENT >= 10000 ~250 bytes #define IRMP_SUPPORT_SAMSUNGAH_PROTOCOL 1 // SAMSUNG AH >= 10000 ~250 bytes #define IRMP_SUPPORT_RADIO1_PROTOCOL 0 // RADIO, e.g. TEVION >= 10000 ~250 bytes (experimental) /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here for ATMEL ATMega/ATTiny/XMega *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #if defined (ATMEL_AVR) || defined (__AVR_XMEGA__) // use PB6 as IR input on AVR # define IRMP_PORT_LETTER B # define IRMP_BIT_NUMBER 6 /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here for PIC C18 or XC8 compiler *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif defined (PIC_C18) // use RB4 as IR input on PIC (C18 or XC8 compiler) # if defined(__12F1840) # define IRMP_PIN RA5 // on 12F1840 with XC8 compiler # else # define IRMP_PIN PORTBbits.RB4 // PIC C18 # endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here for PIC CCS compiler *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif defined (PIC_CCS) # define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC (CCS compiler) /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here for ARM STM32 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif defined (ARM_STM32) // use C13 as IR input on STM32 # define IRMP_PORT_LETTER C # define IRMP_BIT_NUMBER 13 /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here for Stellaris ARM Cortex M4 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F # define IRMP_PORT_LETTER B # define IRMP_BIT_NUMBER 4 /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here for STM8 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif defined (SDCC_STM8) // use PA1 as IR input on STM8 # define IRMP_PORT_LETTER A # define IRMP_BIT_NUMBER 1 /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here for ESP8266 *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif defined (__xtensa__) # define IRMP_BIT_NUMBER 12 // use GPIO12 (Pin 7 UEXT) on ESP8266-EVB evaluation board /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here for Teensy 3.x with teensyduino gcc compiler *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif defined (TEENSY_ARM_CORTEX_M4) # define IRMP_PIN 1 // use Digital pin 1 as IR input on Teensy /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Change hardware pin here for MBED *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif defined(__MBED__) # define IRMP_PIN P0_22 // use P1_27 on LPC1347 # define IRMP_PINMODE PullUp // hardware dependent /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Handling of unknown target system: DON'T CHANGE *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #elif !defined (UNIX_OR_WINDOWS) # error target system not defined. #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef IRMP_LOGGING # define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0 #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Use external logging routines * If you enable external logging, you have also to enable IRMP_LOGGING above *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef IRMP_EXT_LOGGING # define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0 #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM! *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef IRMP_PROTOCOL_NAMES # define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0 #endif /*--------------------------------------------------------------------------------------------------------------------------------------------------- * Use Callbacks to indicate input signal *--------------------------------------------------------------------------------------------------------------------------------------------------- */ #ifndef IRMP_USE_CALLBACK # define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0 #endif #endif // _IRMPCONFIG_H_