/* Xtensa Exception (ie interrupt) Vectors & low-level handler code

   Core exception handler code is placed in the .vecbase section,
   which gets picked up specially in the linker script and placed
   at beginning of IRAM.

   The actual VecBase symbol should be the first thing in .vecbase
   (this is not strictly important as it gets set by symbol lookup not
   by hardcoded address, but having it at 0x40100000 means that the
   exception vectors have memorable offsets, which match the default
   Boot ROM vector offsets. So convenient for human understanding.

   Part of esp-open-rtos
   Original vector contents Copyright (C) 2014-2015 Espressif Systems
   Additions Copyright (C) Superhouse Automation Pty Ltd and Angus Gratton
   BSD Licensed as described in the file LICENSE
*/

#include "led_debug.s"

/* Some UserException causes, see table Table 4–64 in ISA reference */
#define CAUSE_SYSCALL 1
#define CAUSE_LOADSTORE 3
#define CAUSE_LVL1INT 4

	.text
	.section .vecbase.text, "x"
        .global VecBase
	.org 0
VecBase:
	/* IMPORTANT: exception vector literals will go here, but we
	  can't have more than 4 otherwise we push DebugExceptionVector past
	  offset 0x10 relative to VecBase. There should be ways to avoid this,
	  and also keep the VecBase offsets easy to read, but this works for now.
	*/
	.literal_position
	.org 0x10
	.type   DebugExceptionVector, @function
DebugExceptionVector:
	wsr.excsave2 a0
	call0 sdk_user_fatal_exception_handler
	rfi 2

	.org 0x20
	.type   NMIExceptionVector, @function
NMIExceptionVector:
	wsr.excsave3 a0
	call0 CallNMIExceptionHandler
	rfi 3 /* CallNMIExceptionHandler should call rfi itself */

	.org 0x30
	.type   KernelExceptionVector, @function
KernelExceptionVector:
	break 1, 0
	call0 sdk_user_fatal_exception_handler
	rfe

	.org 0x50
	.type   UserExceptionVector, @function
UserExceptionVector:
	wsr.excsave1 a1
	rsr.exccause a1
	beqi a1, CAUSE_LOADSTORE, LoadStoreErrorHandler
	j UserExceptionHandler

	.org 0x70
	.type   DoubleExceptionVector, @function
DoubleExceptionVector:
	break 1, 4
	call0 sdk_user_fatal_exception_handler

/* Reset vector would go here at offset 0x80 but should be unused,
   as vecbase goes back to mask ROM vectors on reset */

/***** end of exception vectors  *****/

/* Xtensa Exception unaligned load handler

   Completes l8/l16 load instructions from Instruction address space,
   for which the architecture only supports 32-bit reads.

   Called from UserExceptionVector if EXCCAUSE is LoadStoreErrorCause

   Fast path (no branches) is for l8ui.
*/
	.literal_position

	.type   LoadStoreErrorHandler, @function
LoadStoreErrorHandler:
	# Note: registers are saved in the address corresponding to their
	# register number times 4.  This allows a quick and easy mapping later
	# on when needing to store the value to a particular register number.
	movi	sp, LoadStoreErrorHandlerStack
	s32i	a0, sp, 0
	s32i	a2, sp, 0x08
	s32i	a3, sp, 0x0c
	s32i	a4, sp, 0x10
	rsr.sar a0              # Save SAR in a0 to restore later

	# Examine the opcode which generated the exception
	# Note: Instructions are in this order to avoid pipeline stalls.
	rsr.epc1 a2
	movi	a3, ~3
	ssa8l	a2 // sar is now correct shift for aligned read
	and	a2, a2, a3 // a2 now 4-byte aligned address of instruction
	l32i	a4, a2, 0
	l32i	a2, a2, 4
	movi	a3, 0x00700F // opcode mask for l8ui/l16si/l16ui
	src	a2, a2, a4   // a2 now instruction that failed
	and	a3, a2, a3
	bnei	a3, 0x000002, .LSE_check_l16

	# Note: At this point, opcode could technically be one of two things:
	#   xx0xx2 (L8UI)
	#   xx8xx2 (Reserved (invalid) opcode)
	# It is assumed that we'll never get to this point from an illegal
	# opcode, so we don't bother to check for that case and presume this is
	# always an L8UI.

	/* a2 holds instruction */
	movi	a4, ~3
	rsr.excvaddr a3 // read faulting address
	and	a4, a3, a4 /* a4 now word aligned read address */

	l32i	a4, a4, 0  /* perform the actual read */
	ssa8l	a3 /* sar is now shift to extract a3's byte */
	srl	a3, a4	/* shift right correct distance */
	extui	a4, a3, 0, 8 /* mask off bits we need for an l8 */

.LSE_post_fetch:
	# We jump back here after either the L8UI or the L16*I routines do the
	# necessary work to read the value from memory.
	# At this point, a2 holds the faulting instruction and a4 holds the
	# correctly read value.

	# Restore original SAR value (saved in a0) and update EPC so we'll
	# return back to the instruction following the one we just emulated
	# Note: Instructions are in this order to avoid pipeline stalls
	rsr.epc1 a3
	wsr.sar	a0
	addi	a3, a3, 0x3
	wsr.epc1 a3

	# Stupid opcode tricks: The jumptable we use later on needs 16 bytes
	# per entry (so we can avoid a second jump by just doing a RFE inside
	# each entry).  Unfortunately, however, Xtensa doesn't have an addx16
	# operation to make that easy for us.  Luckily, all of the faulting
	# opcodes we're processing are guaranteed to have bit 3 be zero, which
	# means if we just shift the register bits of the opcode down by 3
	# instead of 4, we will get the register number multiplied by 2.  This
	# combined with an addx8 will give us an effective addx16 without
	# needing any extra shift operations.
	extui a2, a2, 3, 5 /* a2 now destination register 0-15 times 2 */

	bgei    a2, 10, .LSE_assign_reg  # a5..a15 use jumptable
	beqi    a2, 2, .LSE_assign_a1    # a1 uses a special routine

	# We're storing into a0 or a2..a4, which are all saved in our "stack" area.
	# Calculate the correct address and stick the value in there, then just
	# do our normal restore and RFE (no jumps required, which actually
	# makes a0..a4 substantially faster).
	addx2	a2, a2, sp
	s32i	a4, a2, 0

	# Restore all regs and return
	l32i	a0, sp, 0
	l32i	a2, sp, 0x08
	l32i	a3, sp, 0x0c
	l32i	a4, sp, 0x10
	rsr.excsave1 a1       # restore a1 saved by UserExceptionVector
	rfe

.LSE_assign_reg:
	# At this point, a2 contains the register number times 2, a4 is the
	# read value.

	# Calculate the jumptable address, and restore regs except a2 and a4
	# so we have less to do after jumping.
	# Note: Instructions are in this order to avoid pipeline stalls.
	movi	a3, .LSE_jumptable_base
	l32i	a0, sp, 0
	addx8	a2, a2, a3  # a2 is now the address to jump to
	l32i	a3, sp, 0x0c

	jx a2

/* Check the load instruction a2 for an l16si/16ui instruction

   a2 is the instruction, a3 is masked instruction */
	.balign 4
.LSE_check_l16:
	movi a4, 0x001002 /* l16si or l16ui opcode after masking */
	bne a3, a4, .LSE_wrong_opcode

	# Note: At this point, the opcode could be one of two things:
	#   xx1xx2 (L16UI)
	#   xx9xx2 (L16SI)
	# Both of these we can handle.

	movi	a4, ~3
	rsr.excvaddr a3 // read faulting address
	and	a4, a3, a4 /* a4 now word aligned read address */

	l32i	a4, a4, 0  /* perform the actual read */
	ssa8l	a3 /* sar is now shift to extract a3's byte */
	srl	a3, a4	/* shift right correct distance */
	extui	a4, a3, 0, 16 /* mask off bits we need for an l16 */

	bbci	a2, 15, .LSE_post_fetch # Not a signed op
	bbci	a4, 15, .LSE_post_fetch # Value does not require sign-extension

	movi a3, 0xFFFF0000
	or a4, a3, a4 /* set 32-bit sign bits */
	j .LSE_post_fetch

/* If we got here it's not an opcode we can try to fix, so bomb out */
.LSE_wrong_opcode:
	# Restore registers so any dump the fatal exception routine produces
	# will have correct values
	wsr.sar a0            # Restore SAR saved in a0
	l32i	a0, sp, 0
	l32i	a2, sp, 0x08
	l32i	a3, sp, 0x0c
	l32i	a4, sp, 0x10
	rsr.excsave1 a1
	call0	sdk_user_fatal_exception_handler

	.balign 4
.LSE_assign_a1:
	# a1 is saved in excsave1, so just update that with the value
	wsr.excsave1 a4
	# Restore all regs and return
	l32i	a0, sp, 0
	l32i	a2, sp, 0x08
	l32i	a3, sp, 0x0c
	l32i	a4, sp, 0x10
	rsr.excsave1 a1       # restore a1 saved by UserExceptionVector
	rfe

	.balign 4
.LSE_jumptable:
	# The first 5 entries (80 bytes) of this table are unused (registers
	# a0..a4 are handled separately above).  Rather than have a whole bunch
	# of wasted space, we just pretend that the table starts 80 bytes
	# earlier in memory.
	.set	.LSE_jumptable_base, .LSE_jumptable - (16 * 5)

	.org    .LSE_jumptable_base + (16 * 5)
	mov	a5, a4
	l32i	a2, sp, 0x08
	l32i	a4, sp, 0x10
	rsr.excsave1 a1
	rfe

	.org    .LSE_jumptable_base + (16 * 6)
	mov	a6, a4
	l32i	a2, sp, 0x08
	l32i	a4, sp, 0x10
	rsr.excsave1 a1
	rfe

	.org    .LSE_jumptable_base + (16 * 7)
	mov	a7, a4
	l32i	a2, sp, 0x08
	l32i	a4, sp, 0x10
	rsr.excsave1 a1
	rfe

	.org    .LSE_jumptable_base + (16 * 8)
	mov	a8, a4
	l32i	a2, sp, 0x08
	l32i	a4, sp, 0x10
	rsr.excsave1 a1
	rfe

	.org    .LSE_jumptable_base + (16 * 9)
	mov	a9, a4
	l32i	a2, sp, 0x08
	l32i	a4, sp, 0x10
	rsr.excsave1 a1
	rfe

	.org    .LSE_jumptable_base + (16 * 10)
	mov	a10, a4
	l32i	a2, sp, 0x08
	l32i	a4, sp, 0x10
	rsr.excsave1 a1
	rfe

	.org    .LSE_jumptable_base + (16 * 11)
	mov	a11, a4
	l32i	a2, sp, 0x08
	l32i	a4, sp, 0x10
	rsr.excsave1 a1
	rfe

	.org    .LSE_jumptable_base + (16 * 12)
	mov	a12, a4
	l32i	a2, sp, 0x08
	l32i	a4, sp, 0x10
	rsr.excsave1 a1
	rfe

	.org    .LSE_jumptable_base + (16 * 13)
	mov	a13, a4
	l32i	a2, sp, 0x08
	l32i	a4, sp, 0x10
	rsr.excsave1 a1
	rfe

	.org    .LSE_jumptable_base + (16 * 14)
	mov	a14, a4
	l32i	a2, sp, 0x08
	l32i	a4, sp, 0x10
	rsr.excsave1 a1
	rfe

	.org    .LSE_jumptable_base + (16 * 15)
	mov	a15, a4
	l32i	a2, sp, 0x08
	l32i	a4, sp, 0x10
	rsr.excsave1 a1
	rfe

/* End of LoadStoreErrorHandler */

	.section .bss
NMIHandlerStack: /* stack space for NMI handler */
	.skip 4*0x100
.LNMIHandlerStackTop:
NMIRegisterSaved: /* register space for saving NMI registers */
	.skip 4*(16 + 6)

LoadStoreErrorHandlerStack:
	.word	0	# a0
	.word	0	# (unused)
	.word	0	# a2
	.word	0	# a3
	.word	0	# a4

/* Save register relative to a0 */
.macro SAVE_REG register, regnum
	s32i \register, a0, (4 * (\regnum + 6))
.endm

/* Load register relative to sp */
.macro LOAD_REG register, regnum
	l32i \register, sp, (4 * (\regnum + 6))
.endm

	.text
	.section .vecbase.text
	.literal_position
        .align  4
	.global call_user_start
        .type   call_user_start, @function
call_user_start:
	movi a2, VecBase
	wsr.vecbase a2
	call0 sdk_user_start

	.literal_position
        .align  16
        .type   CallNMIExceptionHandler, @function
CallNMIExceptionHandler:
	movi a0, NMIRegisterSaved
	SAVE_REG a2, 2
	SAVE_REG sp, 1
	SAVE_REG a3, 3
	rsr.excsave3 a2 /* a2 is now former a0 */
	SAVE_REG a4, 4
	SAVE_REG a2, 0
	rsr.epc1 a3
	rsr.exccause a4
	SAVE_REG a3, -5
	SAVE_REG a4, -4
	rsr.excvaddr a3
	SAVE_REG a3, -3
	rsr.excsave1 a3
	SAVE_REG a3, -2
	SAVE_REG a5, 5
	SAVE_REG a6, 6
	SAVE_REG a7, 7
	SAVE_REG a8, 8
	SAVE_REG a9, 9
	SAVE_REG a10, 10
	SAVE_REG a11, 11
	SAVE_REG a12, 12
	SAVE_REG a13, 13
	SAVE_REG a14, 14
	SAVE_REG a15, 15
	movi sp, .LNMIHandlerStackTop
	movi a0, 0
	movi a2, 0x23 /* argument for handler */
	wsr.ps a2
	rsync
	rsr.sar a14
	s32i a14, sp, 0 /* this is also NMIRegisterSaved+0 */
	call0 sdk_wDev_ProcessFiq
	l32i a15, sp, 0
	wsr.sar a15
	movi a2, 0x33
	wsr.ps a2
	rsync
	LOAD_REG a4, 4
	LOAD_REG a5, 5
	LOAD_REG a6, 6
	LOAD_REG a7, 7
	LOAD_REG a8, 8
	LOAD_REG a9, 9
	LOAD_REG a10, 10
	LOAD_REG a11, 11
	LOAD_REG a12, 12
	LOAD_REG a13, 13
	LOAD_REG a14, 14
	LOAD_REG a15, 15
	LOAD_REG a2, -5
	LOAD_REG a3, -4
	wsr.epc1 a2
	wsr.exccause a3
	LOAD_REG a2, -3
	LOAD_REG a3, -2
	wsr.excvaddr a2
	wsr.excsave1 a3
	LOAD_REG a0, 0
	/* set dport nmi status bit 0 (wDev_ProcessFiq clears & verifies this bit stays cleared,
	   see http://esp8266-re.foogod.com/wiki/WDev_ProcessFiq_%28IoT_RTOS_SDK_0.9.9%29)  */
	movi a2, 0x3ff00000
	movi a3, 0x1
	s32i a3, a2, 0
	LOAD_REG a2, 2
	LOAD_REG a3, 3
	LOAD_REG a1, 1
	rfi 0x3

        .type   UserExceptionHandler, @function
UserExceptionHandler:
	xsr.excsave1 a0  # a0 now contains sp
	mov sp, a0
	addi sp, sp, -0x50
	s32i a0, sp, 0x10
	rsr.ps a0
	s32i a0, sp, 0x08
	rsr.epc1 a0
	s32i a0, sp, 0x04
	rsr.excsave1 a0
	s32i a0, sp, 0x0c
	movi a0, _xt_user_exit
	s32i a0, sp, 0x0
	call0 sdk__xt_int_enter
	movi a0, 0x23
	wsr.ps a0
	rsync
	rsr.exccause a2
	beqi a2, CAUSE_LVL1INT, UserHandleInterrupt
	/* Any UserException cause other than level 1 interrupt triggers a panic */
UserFailOtherExceptionCause:
	break 1, 1
	call0 sdk_user_fatal_exception_handler
UserHandleInterrupt:
	rsil a0, 1
	rsr.intenable a2
	rsr.interrupt a3
	movi a4, 0x3fff
	and a2, a2, a3
	and a2, a2, a4 /* a2 = 0x3FFF & INTENABLE & INTERRUPT */
UserHandleTimer:
	movi a3, 0xffbf
	and a3, a2, a3 /* a3 = a2 & 0xFFBF, ie remove 0x40 from a2 if set */
	bnez a3, UserTimerDone /* bits other than 0x40 are set */
	movi a3, 0x40
	sub a12, a2, a3 /* a12 = a2 - 0x40 -- Will be zero if bit 6 set */
	call0 sdk__xt_timer_int /* tick timer interrupt */
	mov a2, a12 /* restore a2 from a12, ie zero */
	beqz a2, UserIntDone
UserTimerDone:
	call0 _xt_isr_handler
	bnez a2, UserHandleTimer
UserIntDone:
	beqz a2, UserIntExit
	break 1, 1 /* non-zero remnant in a2 means fail */
	call0 sdk_user_fatal_exception_handler
UserIntExit:
	call0 sdk__xt_int_exit /* jumps to _xt_user_exit. Never returns here */

/* _xt_user_exit is used to exit interrupt context.
    TODO: Find a better place for this to live.
*/
	.text
	.section .text
	.global _xt_user_exit
	.type _xt_user_exit, @function
_xt_user_exit:
	l32i a0, sp, 0x8
	wsr.ps a0
	l32i a0, sp, 0x4
	wsr.epc1 a0
	l32i a0, sp, 0xc
	l32i sp, sp, 0x10
	rsync
	rfe