Angus Gratton
42880fded5
Paho MQTT Embedded C client: Use submodule pointing to upstream repo
...
Due to code organisation of upstream repo, MQTTClient still needs
copying into our repo.
2016-06-26 19:56:56 +10:00
Angus Gratton
30d8e162b3
blink example: Change default to GPIO2 as this pin has an LED on most boards
2016-02-09 10:58:56 +11:00
Angus Gratton
812c2fef21
Removed INLINED (force inline) macro.
...
Progress towards #57 .
2015-11-28 18:01:03 +11:00
Angus Gratton
7823a28ff8
Change default baud rate back to 74906bps, compatible with boot ROM rate
...
This reverts a behaviour change from 3ceadfc0a6
2015-10-06 23:11:17 +11:00
Angus Gratton
3ceadfc0a6
uart.h: Add uart_get_baud/uart_set_baud functions, change default baud rate from 74906 to 115200
2015-10-06 17:49:00 +11:00
Alex Stewart
fc1a1a7d0a
Add esp/gpio_regs.h
2015-08-18 22:46:25 -07:00
Alex Stewart
2ffd3da71e
Add esp/iomux_regs.h
2015-08-18 17:38:31 -07:00
Angus Gratton
ad37abda8b
blink examplpe: Fix FreeRTOSConfig mistake
2015-06-17 08:07:26 +10:00
Angus Gratton
72b61b17f8
Create a default FreeRTOSConfig.h, can override on a per-program basis
...
Closes #12
2015-06-16 17:28:32 +10:00
Angus Gratton
685a48583a
Change 'TARGET' in makefiles to 'PROGRAM', keep consistent with documentation terminology
2015-06-12 10:26:02 +10:00
Angus Gratton
47a7bb1952
blink example: Remove stray gpio_enable call
2015-06-12 09:57:32 +10:00
Angus Gratton
c09167715e
Indentation fixes
...
- Fix dir-locals so emacs won't inject occasional tabs to case statements.
- Fix stray tab indentation in example programs. (Thx @pfalcon for pointing this out)
2015-06-09 09:00:32 +10:00
Angus Gratton
0078252df3
Add GPIO config, interrupt registers, GPIO interrupt support, 'button' example
2015-06-08 18:20:29 +10:00
Angus Gratton
2c46be9825
Basic support for GPIOs 0-15.
...
Start new 'core' component for low-level parts
Progress towards #8
2015-06-08 12:09:34 +10:00
