j3d1/esp-open-rtos
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Add esp/gpio_regs.h

Browse source
This commit is contained in:
Alex Stewart 2015-08-18 22:46:25 -07:00
parent 2ffd3da71e
commit fc1a1a7d0a
6 changed files with 167 additions and 114 deletions
Download patch file Download diff file Expand all files Collapse all files

76
core/include/esp/registers.h
View file

@ -17,6 +17,7 @@
#include "esp/types.h"
#include "esp/iomux_regs.h"
#include "esp/gpio_regs.h"
/* Internal macro, only defined in header body */
#define _REG(BASE, OFFSET) (*(esp_reg_t)((BASE)+(OFFSET)))
@ -31,7 +32,7 @@
#define UART0_BASE (MMIO_BASE + 0)
#define SPI1_BASE (MMIO_BASE + 0x0100)
#define SPI_BASE (MMIO_BASE + 0x0200)
#define GPIO0_BASE (MMIO_BASE + 0x0300)
//#define GPIO0_BASE (MMIO_BASE + 0x0300)
#define TIMER_BASE (MMIO_BASE + 0x0600)
#define RTC_BASE (MMIO_BASE + 0x0700)
//#define IOMUX_BASE (MMIO_BASE + 0x0800)
@ -42,79 +43,6 @@
#define RTCS_BASE (MMIO_BASE + 0x1100)
#define RTCU_BASE (MMIO_BASE + 0x1200)
/*
* Based on descriptions by mamalala at https://github.com/esp8266/esp8266-wiki/wiki/gpio-registers
*/
/** GPIO OUTPUT registers GPIO_OUT_REG, GPIO_OUT_SET, GPIO_OUT_CLEAR
*
* Registers for pin outputs.
*
* _SET and _CLEAR write-only registers set and clear bits in _REG,
* respectively.
*
* ie
* GPIO_OUT_REG |= BIT(3);
* and
* GPIO_OUT_SET = BIT(3);
*
* ... are equivalent, but latter uses less CPU cycles.
*/
#define GPIO_OUT_REG _REG(GPIO0_BASE, 0x00)
#define GPIO_OUT_SET _REG(GPIO0_BASE, 0x04)
#define GPIO_OUT_CLEAR _REG(GPIO0_BASE, 0x08)
/* GPIO DIR registers GPIO_DIR_REG, GPIO_DIR_SET, GPIO_DIR_CLEAR
*
* Set bit in DIR register for output pins. Writing to _SET and _CLEAR
* registers set and clear bits in _REG, respectively.
*/
#define GPIO_DIR_REG _REG(GPIO0_BASE, 0x0C)
#define GPIO_DIR_SET _REG(GPIO0_BASE, 0x10)
#define GPIO_DIR_CLEAR _REG(GPIO0_BASE, 0x14)
/* GPIO IN register GPIO_IN_REG
*
* Reads current input values.
*/
#define GPIO_IN_REG _REG(GPIO0_BASE, 0x18)
/* GPIO interrupt 'status' flag
Bit set if interrupt has fired (see below for interrupt config
registers.
Lower 16 bits only are used.
*/
#define GPIO_STATUS_REG _REG(GPIO0_BASE,0x1c)
#define GPIO_STATUS_SET _REG(GPIO0_BASE,0x20)
#define GPIO_STATUS_CLEAR _REG(GPIO0_BASE,0x24)
#define GPIO_STATUS_MASK 0x0000FFFFL
/* GPIO pin control registers for GPIOs 0-15
*
*/
#define GPIO_CTRL_REG(GPNUM) _REG(GPIO0_BASE, 0x28+(GPNUM*4))
#define GPIO_SOURCE_GPIO 0
#define GPIO_SOURCE_DAC BIT(0) /* "Sigma-Delta" */
#define GPIO_SOURCE_MASK BIT(0
#define GPIO_DRIVE_PUSH_PULL 0
#define GPIO_DRIVE_OPEN_DRAIN BIT(2)
#define GPIO_DRIVE_MASK BIT(2)
#define GPIO_INT_NONE 0
#define GPIO_INT_RISING BIT(7)
#define GPIO_INT_FALLING BIT(8)
#define GPIO_INT_CHANGE (BIT(7)|BIT(8))
#define GPIO_INT_LOW BIT(9)
#define GPIO_INT_HIGH (BIT(7)|BIT(9))
#define GPIO_INT_MASK (BIT(7)|BIT(8)|BIT(9))
/* TIMER registers
*
* ESP8266 has two hardware(?) timer counters, FRC1 and FRC2.