Merge branch 'master' into open-libmain

.gitmodules

@@ -4,3 +4,10 @@
 [submodule "extras/mbedtls/mbedtls"]
 	path = extras/mbedtls/mbedtls
 	url = https://github.com/ARMmbed/mbedtls.git
+[submodule "extras/jsmn/jsmn"]
+	path = extras/jsmn/jsmn
+	url = https://github.com/zserge/jsmn.git
+[submodule "bootloader/rboot"]
+	path = bootloader/rboot
+	url = https://github.com/raburton/rboot.git
+

.travis.yml

@@ -2,17 +2,15 @@ language: c
 sudo: false
 env:
   # Target commit for https://github.com/pfalcon/esp-open-sdk/
-  OPENSDK_COMMIT=9bd3aba
+  OPENSDK_COMMIT=a48b12f
   CROSS_ROOT="${HOME}/toolchain-${OPENSDK_COMMIT}"
   CROSS_BINDIR="${CROSS_ROOT}/bin"
-  ESPTOOL2_COMMIT=ec0e2c7
+  CROSS="ccache xtensa-lx106-elf-"
-  ESPTOOL2_DIR="${HOME}/esptool2-${ESPTOOL2_COMMIT}"
+  MAKE_CMD="make WARNINGS_AS_ERRORS=1 -C examples/ build-examples"
-  PATH=${PATH}:${CROSS_BINDIR}:${ESPTOOL2_DIR}
+  PATH=${PATH}:${CROSS_BINDIR}
-  MAKE_CMD="make WARNINGS_AS_ERRORS=1 -C examples/ build-examples CROSS=\"ccache xtensa-lx106-elf-\""
 cache:
   directories:
     - ${CROSS_ROOT}
-    - ${ESPTOOL2_DIR}
 addons:
   apt:
     packages:
@@ -34,31 +32,16 @@ addons:
     - python-serial
     - sed
     - git
+    - vim-common
 
 before_install:
-  # Install a toolchain using esp-open-sdk (parts we need for this are the GNU toolchain and libhal)
+  - travis_wait 30 utils/travis_build/install_toolchain.sh
-  #
-  # Adds hack of "{$HAS_TC} || -Buildstep-" to avoid rebuilding toolchain if it's already
-  # installed from the cache. If this gets any more complex it should be spun out to a standalone shell script.
-  - export HAS_TC="test -d ${CROSS_BINDIR}"
-  - unset CC # Travis sets this due to "language: c", but it confuses autotools configure when cross-building
-  - ${HAS_TC} || git clone --recursive https://github.com/pfalcon/esp-open-sdk.git
-  - ${HAS_TC} || cd esp-open-sdk
-  - ${HAS_TC} || git reset --hard ${OPENSDK_COMMIT}
-  - ${HAS_TC} || git submodule update
-  - ${HAS_TC} || sed -i "s/2.69/2.68/" lx106-hal/configure.ac # this is a nasty hack as Ubuntu Precise only has autoconf 2.68 not 2.69...
-  - ${HAS_TC} || sed -r -i 's%TOOLCHAIN ?=.*%TOOLCHAIN=${CROSS_ROOT}%' Makefile
-  - ${HAS_TC} || make STANDALONE=n
-  - export HAS_ET2="test -f ${ESPTOOL2_DIR}/esptool2"
-  - ${HAS_ET2} || git clone https://github.com/raburton/esptool2 ${ESPTOOL2_DIR}
-  - ${HAS_ET2} || cd ${ESPTOOL2_DIR}
-  - ${HAS_ET2} || git reset --hard ${ESPTOOL2_COMMIT}
-  - ${HAS_ET2} || make
 
 script:
   - cd ${TRAVIS_BUILD_DIR}
   # Remove ssid_config requirement for examples
   - sed -i "s%#error%//#error%" include/ssid_config.h
-  # Try building everything w/ non-verbose output (to avoid 4MB log limit), but if it fails then
+  # Don't verbose-build all examples (too much output), only verbose-build errors
-  # rerun with V=1 so the error part is output verbosely
+  - ( ${MAKE_CMD} ) || ( ${MAKE_CMD} V=1 )
-  - ${MAKE_CMD} || ( ${MAKE_CMD} V=1 )
+  # build bootloader
+  - make -C bootloader/

FreeRTOS/Source/portable/esp8266/port.c

@@ -73,6 +73,7 @@
 #include <malloc.h>
 #include <unistd.h>
 #include <stdio.h>
+#include <xtensa_ops.h>
 
 #include "FreeRTOS.h"
 #include "task.h"
@@ -81,13 +82,14 @@
 unsigned cpu_sr;
 char level1_int_disabled;
 
-/* Supervisor stack pointer entry. This is the "high water mark" of how far the
+/* Supervisor stack pointer entry. This is the "high water mark" of
-   supervisor stack grew down before task started.
+   how far the supervisor stack grew down before task started. Is zero
+   before the scheduler starts.
 
-   After tasks start, task stacks are all allocated from the heap and
+ After the scheduler starts, task stacks are all allocated from the
-   FreeRTOS checks for stack overflow.
+ heap and FreeRTOS checks for stack overflow.
 */
-static uint32_t xPortSupervisorStackPointer;
+void *xPortSupervisorStackPointer;
 
 /*
  * Stack initialization
@@ -218,9 +220,9 @@ size_t xPortGetFreeHeapSize( void )
     struct mallinfo mi = mallinfo();
     uint32_t brk_val = (uint32_t) sbrk(0);
 
-    uint32_t sp = xPortSupervisorStackPointer;
+    intptr_t sp = (intptr_t)xPortSupervisorStackPointer;
     if(sp == 0) /* scheduler not started */
-        __asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp));
+        SP(sp);
     return sp - brk_val + mi.fordblks;
 }
 

bootloader/Makefile

@@ -0,0 +1,59 @@
+# This is a wrapper around the rboot makefile, which gives us the parameters
+# we need to use rboot with esp-open-rtos.
+#
+# Use 'make bootloader' to build a custom bootloader.
+#
+# 'make flash' for any esp-open-rtos program will use the compiled
+# bootloader if it exists, or a prebuilt bootloader if no custom
+# bootloader was compiled.
+#
+# The wrapper means we don't require esptool2 in the build process, so we can just use
+# esptool.py (still need xxd, grep, sed to generate the header - see below.)
+BOOTLOADER_DIR:=$(dir $(abspath $(lastword $(MAKEFILE_LIST))))
+
+include ../parameters.mk
+
+all: $(FIRMWARE_DIR)/rboot.bin
+
+rboot/Makefile:
+	$(error rboot git submodule is not checkedo out. Try running 'git submodule update --init --recursive')
+
+$(FIRMWARE_DIR)/rboot.bin: $(BUILD_DIR)/rboot.elf $(FIRMWARE_DIR)
+	@echo "FW rboot.bin"
+	$(Q) $(ESPTOOL) elf2image $(ESPTOOL_ARGS) $< -o $(BUILD_DIR)/
+	$(Q) mv $(BUILD_DIR)/0x00000.bin $@
+
+# rboot generates this header using the 'esptool2 -header' option. To try and avoid
+# esptool2 as a dependency, we try it here using grep, sed, xxd (all fairly common Unix tools)
+$(BUILD_DIR)/rboot-hex2a.h: $(BUILD_DIR)/rboot-stage2a.elf $(BUILD_DIR)
+	@echo "Extracting stub image header..."
+	$(Q) xtensa-lx106-elf-objcopy $< --only-section .text -Obinary $(BUILD_DIR)/rboot-hex2a.bin
+	$(Q) xxd -i $(BUILD_DIR)/rboot-hex2a.bin > $@.in
+	$(Q) sed -i "s/unsigned char .\+\[\]/const uint8 _text_data[]/" $@.in
+	$(Q) sed -i "s/unsigned int .\+_len/const uint32 _text_len/" $@.in
+	$(Q) echo "const uint32 entry_addr = $$(xtensa-lx106-elf-objdump -f $< | grep 'start address' | grep -o '0x.\+');" >> $@.in
+	$(Q) echo "const uint32 _text_addr = 0x$$(xtensa-lx106-elf-objdump -h -j .text $< | grep ".text" | grep -o '401.....' | head -n1);" >> $@.in
+	$(Q) mv $@.in $@
+
+
+RBOOT_BUILD_BASE="$(abspath $(BUILD_DIR))"
+RBOOT_FW_BASE="$(abspath $(FIRMWARE_DIR))"
+MAKE_VARS=RBOOT_EXTRA_INCDIR=$(BOOTLOADER_DIR) RBOOT_BUILD_BASE=$(RBOOT_BUILD_BASE) RBOOT_FW_BASE=$(RBOOT_FW_BASE)
+
+$(BUILD_DIR)/rboot-stage2a.elf: $(BUILD_DIR)
+	$(Q) $(MAKE) -C rboot $(RBOOT_BUILD_BASE)/rboot-stage2a.elf $(MAKE_VARS)
+
+$(BUILD_DIR)/rboot.elf: $(BUILD_DIR)/rboot-hex2a.h
+	$(Q) $(MAKE) -C rboot $(RBOOT_BUILD_BASE)/rboot.elf $(MAKE_VARS)
+
+$(BUILD_DIR) $(FIRMWARE_DIR):
+	mkdir -p $@
+
+flash: $(FIRMWARE_DIR)/rboot.bin
+	$(Q) $(ESPTOOL) -p $(ESPPORT) -b $(ESPBAUD) write_flash $(ESPTOOL_ARGS) 0x0 $<
+
+clean:
+	$(Q) rm -rf $(BUILD_DIR)
+	$(Q) rm -rf $(FIRMWARE_DIR)
+
+.PHONY: all

bootloader/README.md

@@ -0,0 +1,12 @@
+OTA Bootloader (rboot) source module and support files.
+
+rboot is an open source bootloader by Richard Burton:
+https://github.com/raburton/rboot
+
+Can be used to build an esp-open-rtos compatible rboot bootloader. Run 'make bootloader' in this directory to compile a new bootloader.
+
+Compiling a new bootloader is optional, there's a prebuilt one in the "firmware_prebuilt" directory that will be used if no new bootloader was compiled.
+
+It is also possible to use rboot from upstream verbatim, but *ensure that the `RBOOT_BIG_FLASH` option is enabled or images in slots other than 0 won't work correctly.
+
+See the contents of the 'rboot' directory for more information on rboot.

bootloader/rboot

@@ -0,0 +1 @@
+Subproject commit 30afbaa777e00abf9d7d469fb3345f118c4975c1

bootloader/rboot.h

@@ -0,0 +1,23 @@
+/* rboot header overrides
+
+   This "wrapper" header contains default values for building rboot
+   on/for esp-open-rtos. It gets included both when building the
+   bootloader and when building extras/rboot-ota support. It includes
+   the default bootloader/rboot/rboot.h header via the gcc
+   include_next mechanism.
+*/
+#ifndef __RBOOT_H__
+
+// Big flash support is required for esp-open-rtos (we use 8Mbit
+// "slots" only.)
+#define BOOT_BIG_FLASH
+
+// enable 2 way communication between
+// rBoot and the user app via the esp rtc data area
+#define BOOT_RTC_ENABLED
+
+// Call 'main' rboot.h to pick up defaults for other parameters
+#include_next "rboot.h"
+
+#endif
+

common.mk

@@ -20,156 +20,10 @@
 # assume the 'root' directory (ie top of the tree) is the directory common.mk is in
 ROOT := $(dir $(lastword $(MAKEFILE_LIST)))
 
-# include optional local overrides at the root level, then in program directory
+include $(ROOT)parameters.mk
-#
-# Create either of these files for local system overrides if possible,
-# instead of editing this makefile directly.
--include $(ROOT)local.mk
--include local.mk
-
-# Flash size in megabits
-# Valid values are same as for esptool.py - 2,4,8,16,32
-FLASH_SIZE ?= 16
-
-# Flash mode, valid values are same as for esptool.py - qio,qout,dio.dout
-FLASH_MODE ?= qio
-
-# Flash speed in MHz, valid values are same as for esptool.py - 80, 40, 26, 20
-FLASH_SPEED ?= 40
-
-# Output directories to store intermediate compiled files
-# relative to the program directory
-BUILD_DIR ?= $(PROGRAM_DIR)build/
-FIRMWARE_DIR ?= $(PROGRAM_DIR)firmware/
-
-# esptool.py from https://github.com/themadinventor/esptool
-ESPTOOL ?= esptool.py
-# serial port settings for esptool.py
-ESPPORT ?= /dev/ttyUSB0
-ESPBAUD ?= 115200
-
-# set this to 0 if you don't need floating point support in printf/scanf
-# this will save approx 14.5KB flash space and 448 bytes of statically allocated
-# data RAM
-#
-# NB: Setting the value to 0 requires a recent esptool.py (Feb 2016 / commit ebf02c9)
-PRINTF_SCANF_FLOAT_SUPPORT ?= 1
-
-# Set OTA to 1 to build an image that supports rBoot OTA bootloader
-#
-# Currently only works with 16mbit or more flash sizes, with 8mbit
-# images for each "slot"
-OTA ?= 0
-
-ifeq ($(OTA),1)
-# for OTA, we build a "SDK v1.2 bootloader" compatible image where everything is in
-# one file (should work with the v1.2 binary bootloader, and the FOSS rBoot bootloader).
-IMGTOOL ?= esptool2
-
-# Tell C preprocessor that we're building for OTA
-CPPFLAGS = -DOTA
-endif
-
-FLAVOR ?= release # or debug
-
-# Compiler names, etc. assume gdb
-CROSS ?= xtensa-lx106-elf-
-
-# Path to the filteroutput.py tool
-FILTEROUTPUT ?= $(ROOT)/utils/filteroutput.py
-
-AR = $(CROSS)ar
-CC = $(CROSS)gcc
-CPP = $(CROSS)cpp
-LD = $(CROSS)gcc
-NM = $(CROSS)nm
-C++ = $(CROSS)g++
-SIZE = $(CROSS)size
-OBJCOPY = $(CROSS)objcopy
-OBJDUMP = $(CROSS)objdump
-
-# Source components to compile and link. Each of these are subdirectories
-# of the root, with a 'component.mk' file.
-COMPONENTS     ?= $(EXTRA_COMPONENTS) FreeRTOS lwip core open_esplibs
-
-# binary esp-iot-rtos SDK libraries to link. These are pre-processed prior to linking.
-SDK_LIBS		?= main net80211 phy pp wpa
-
-# open source libraries linked in
-LIBS ?= hal gcc c
-
-# set to 0 if you want to use the toolchain libc instead of esp-open-rtos newlib
-OWN_LIBC ?= 1
-
-# Note: you will need a recent esp
-ENTRY_SYMBOL ?= call_user_start
-
-# Set this to zero if you don't want individual function & data sections
-# (some code may be slightly slower, linking will be slighty slower,
-# but compiled code size will come down a small amount.)
-SPLIT_SECTIONS ?= 1
-
-# Set this to 1 to have all compiler warnings treated as errors (and stop the
-# build).  This is recommended whenever you are working on code which will be
-# submitted back to the main project, as all submitted code will be expected to
-# compile without warnings to be accepted.
-WARNINGS_AS_ERRORS ?= 0
-
-# Common flags for both C & C++_
-C_CXX_FLAGS ?= -Wall -Wl,-EL -nostdlib $(EXTRA_C_CXX_FLAGS)
-# Flags for C only
-CFLAGS		?= $(C_CXX_FLAGS) -std=gnu99 $(EXTRA_CFLAGS)
-# Flags for C++ only
-CXXFLAGS	?= $(C_CXX_FLAGS) -fno-exceptions -fno-rtti $(EXTRA_CXXFLAGS)
-
-# these aren't technically preprocesor args, but used by all 3 of C, C++, assembler
-CPPFLAGS	+= -mlongcalls -mtext-section-literals
-
-LDFLAGS		= -nostdlib -Wl,--no-check-sections -L$(BUILD_DIR)sdklib -L$(ROOT)lib -u $(ENTRY_SYMBOL) -Wl,-static -Wl,-Map=$(BUILD_DIR)$(PROGRAM).map $(EXTRA_LDFLAGS)
-
-ifeq ($(WARNINGS_AS_ERRORS),1)
-    C_CXX_FLAGS += -Werror
-endif
-
-ifeq ($(SPLIT_SECTIONS),1)
-  C_CXX_FLAGS += -ffunction-sections -fdata-sections
-  LDFLAGS += -Wl,-gc-sections
-endif
-
-ifeq ($(FLAVOR),debug)
-    C_CXX_FLAGS += -g -O0
-    LDFLAGS += -g -O0
-else ifeq ($(FLAVOR),sdklike)
-    # These are flags intended to produce object code as similar as possible to
-    # the output of the compiler used to build the SDK libs (for comparison of
-    # disassemblies when coding replacement routines).  It is not normally
-    # intended to be used otherwise.
-    CFLAGS += -O2 -Os -fno-inline -fno-ipa-cp -fno-toplevel-reorder -fno-caller-saves -fconserve-stack
-    LDFLAGS += -O2
-else
-    C_CXX_FLAGS += -g -O2
-    LDFLAGS += -g -O2
-endif
-
-GITSHORTREV=\"$(shell cd $(ROOT); git rev-parse --short -q HEAD 2> /dev/null)\"
-ifeq ($(GITSHORTREV),\"\")
-  GITSHORTREV="\"(nogit)\"" # (same length as a short git hash)
-endif
-CPPFLAGS += -DGITSHORTREV=$(GITSHORTREV)
-
-ifeq ($(OTA),0)
-LINKER_SCRIPTS  = $(ROOT)ld/nonota.ld
-else
-LINKER_SCRIPTS = $(ROOT)ld/ota.ld
-endif
-LINKER_SCRIPTS += $(ROOT)ld/common.ld $(ROOT)ld/rom.ld
-
-####
-#### no user configurable options below here
-####
 
 ifndef PROGRAM
-	$(error "Set the PROGRAM environment variable in your Makefile before including common.mk"
+$(error "Set the PROGRAM environment variable in your Makefile before including common.mk")
 endif
 
 # hacky way to get a single space value
@@ -188,28 +42,7 @@ LIB_ARGS      = $(addprefix -l,$(LIBS))
 PROGRAM_OUT   = $(BUILD_DIR)$(PROGRAM).out
 LDFLAGS      += $(addprefix -T,$(LINKER_SCRIPTS))
 
-ifeq ($(OTA),0)
-# for non-OTA, we create two different files for uploading into the flash
-# these are the names and options to generate them
-FW_ADDR_1	= 0x00000
-FW_ADDR_2	= 0x20000
-FW_FILE_1    = $(addprefix $(FIRMWARE_DIR),$(FW_ADDR_1).bin)
-FW_FILE_2    = $(addprefix $(FIRMWARE_DIR),$(FW_ADDR_2).bin)
-else
-# for OTA, it's a single monolithic image
 FW_FILE = $(addprefix $(FIRMWARE_DIR),$(PROGRAM).bin)
-endif
-
-# firmware tool arguments
-ESPTOOL_ARGS=-fs $(FLASH_SIZE)m -fm $(FLASH_MODE) -ff $(FLASH_SPEED)m
-
-IMGTOOL_FLASH_SIZE_2=256
-IMGTOOL_FLASH_SIZE_4=512
-IMGTOOL_FLASH_SIZE_8=1024
-IMGTOOL_FLASH_SIZE_16=2048
-IMGTOOL_FLASH_SIZE_32=4096
-IMGTOOL_FLASH_SIZE=$(value IMGTOOL_FLASH_SIZE_$(FLASH_SIZE))
-IMGTOOL_ARGS=-$(IMGTOOL_FLASH_SIZE) -$(FLASH_MODE) -$(FLASH_SPEED)
 
 # Common include directories, shared across all "components"
 # components will add their include directories to this argument
@@ -235,7 +68,7 @@ Q := @
 vecho := @echo
 endif
 
-.PHONY: all clean debug_print
+.PHONY: all clean flash erase_flash
 
 all: $(PROGRAM_OUT) $(FW_FILE_1) $(FW_FILE_2) $(FW_FILE)
 
@@ -373,16 +206,14 @@ $(FW_FILE_1) $(FW_FILE_2): $(PROGRAM_OUT) $(FIRMWARE_DIR)
 	$(Q) $(ESPTOOL) elf2image $(ESPTOOL_ARGS) $< -o $(FIRMWARE_DIR)
 
 $(FW_FILE): $(PROGRAM_OUT) $(FIRMWARE_DIR)
-	$(Q) $(IMGTOOL) $(IMGTOOL_ARGS) -bin -boot2 $(PROGRAM_OUT) $(FW_FILE) .text .data .rodata
+	$(vecho) "FW $@"
+	$(Q) $(ESPTOOL) elf2image --version=2 $(ESPTOOL_ARGS) $< -o $(FW_FILE)
 
-ifeq ($(OTA),0)
-flash: $(FW_FILE_1) $(FW_FILE_2)
-	$(ESPTOOL) -p $(ESPPORT) --baud $(ESPBAUD) write_flash $(ESPTOOL_ARGS) $(FW_ADDR_2) $(FW_FILE_2) $(FW_ADDR_1) $(FW_FILE_1)
-else
 flash: $(FW_FILE)
-	$(vecho) "Flashing OTA image slot 0 (bootloader not updated)"
+	$(ESPTOOL) -p $(ESPPORT) --baud $(ESPBAUD) write_flash $(ESPTOOL_ARGS) 0x0 $(RBOOT_BIN) 0x1000 $(RBOOT_CONF) 0x2000 $(FW_FILE)
-	$(ESPTOOL) -p $(ESPPORT) --baud $(ESPBAUD) write_flash $(ESPTOOL_ARGS) 0x2000 $(FW_FILE)
+
-endif
+erase_flash:
+	$(ESPTOOL) -p $(ESPPORT) --baud $(ESPBAUD) erase_flash
 
 size: $(PROGRAM_OUT)
 	$(Q) $(CROSS)size --format=sysv $(PROGRAM_OUT)

core/app_main.c

@@ -24,6 +24,7 @@
 #include "os_version.h"
 
 #include "espressif/esp_common.h"
+#include "espressif/phy_info.h"
 #include "sdk_internal.h"
 #include "esplibs/libmain.h"
 
@@ -32,8 +33,6 @@
 void user_init(void);
 
 #define BOOT_INFO_SIZE 28
-//TODO: phy_info should probably be a struct (no idea about its organization, though)
-#define PHY_INFO_SIZE 128
 
 // These are the offsets of these values within the RTCMEM regions.  It appears
 // that the ROM saves them to RTCMEM before calling us, and we pull them out of
@@ -44,26 +43,6 @@ void user_init(void);
 extern uint32_t _bss_start;
 extern uint32_t _bss_end;
 
-// .Ldata003 -- .irom.text+0x0
-static const uint8_t IROM default_phy_info[PHY_INFO_SIZE] = {
-    0x05, 0x00, 0x04, 0x02, 0x05, 0x05, 0x05, 0x02,
-    0x05, 0x00, 0x04, 0x05, 0x05, 0x04, 0x05, 0x05,
-    0x04, 0xfe, 0xfd, 0xff, 0xf0, 0xf0, 0xf0, 0xe0,
-    0xe0, 0xe0, 0xe1, 0x0a, 0xff, 0xff, 0xf8, 0x00,
-    0xf8, 0xf8, 0x52, 0x4e, 0x4a, 0x44, 0x40, 0x38,
-    0x00, 0x00, 0x01, 0x01, 0x02, 0x03, 0x04, 0x05,
-    0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0xe1, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x01, 0x93, 0x43, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};
-
 // user_init_flag -- .bss+0x0
 uint8_t sdk_user_init_flag;
 
@@ -81,7 +60,7 @@ xTaskHandle sdk_xWatchDogTaskHandle;
 static void IRAM get_otp_mac_address(uint8_t *buf);
 static void IRAM set_spi0_divisor(uint32_t divisor);
 static void zero_bss(void);
-static void init_networking(uint8_t *phy_info, uint8_t *mac_addr);
+static void init_networking(sdk_phy_info_t *phy_info, uint8_t *mac_addr);
 static void init_g_ic(void);
 static void user_start_phase2(void);
 static void dump_flash_sector(uint32_t start_sector, uint32_t length);
@@ -254,7 +233,7 @@ static void zero_bss(void) {
 }
 
 // .Lfunc006 -- .irom0.text+0x70
-static void init_networking(uint8_t *phy_info, uint8_t *mac_addr) {
+static void init_networking(sdk_phy_info_t *phy_info, uint8_t *mac_addr) {
     if (sdk_register_chipv6_phy(phy_info)) {
         printf("FATAL: sdk_register_chipv6_phy failed");
         abort();
@@ -361,9 +340,9 @@ extern void (*__init_array_start)(void);
 extern void (*__init_array_end)(void);
 
 // .Lfunc009 -- .irom0.text+0x5b4
-static void user_start_phase2(void) {
+static __attribute__((noinline)) void user_start_phase2(void) {
     uint8_t *buf;
-    uint8_t *phy_info;
+    sdk_phy_info_t phy_info, default_phy_info;
 
     sdk_system_rtc_mem_read(0, &sdk_rst_if, sizeof(sdk_rst_if));
     if (sdk_rst_if.reason > 3) {
@@ -381,8 +360,16 @@ static void user_start_phase2(void) {
     sdk_info._unknown4 = 0x00ffffff;
     sdk_info._unknown8 = 0x0104a8c0;
     init_g_ic();
-    phy_info = malloc(PHY_INFO_SIZE);
+
-    sdk_spi_flash_read(sdk_flashchip.chip_size - sdk_flashchip.sector_size * 4, (uint32_t *)phy_info, PHY_INFO_SIZE);
+    read_saved_phy_info(&phy_info);
+    get_default_phy_info(&default_phy_info);
+
+    if (phy_info.version != default_phy_info.version) {
+        /* Versions don't match, use default for PHY info
+           (may be a blank config sector, or a new default version.)
+         */
+        memcpy(&phy_info, &default_phy_info, sizeof(sdk_phy_info_t));
+    }
 
     // Disable default buffering on stdout
     setbuf(stdout, NULL);
@@ -390,13 +377,7 @@ static void user_start_phase2(void) {
     uart_flush_txfifo(0);
     uart_flush_txfifo(1);
 
-    if (phy_info[0] != 5) {
+    init_networking(&phy_info, sdk_info.sta_mac_addr);
-        // Bad version byte.  Discard what we read and use default values
-        // instead.
-        memcpy(phy_info, default_phy_info, PHY_INFO_SIZE);
-    }
-    init_networking(phy_info, sdk_info.sta_mac_addr);
-    free(phy_info);
 
     // Call gcc constructor functions
     void (**ctor)(void);
@@ -433,11 +414,11 @@ static void dump_flash_sector(uint32_t start_sector, uint32_t length) {
 }
 
 // .Lfunc011 -- .irom0.text+0x790
-static void dump_flash_config_sectors(uint32_t start_sector) {
+static __attribute__((noinline)) void dump_flash_config_sectors(uint32_t start_sector) {
     printf("system param error\n");
     // Note: original SDK code didn't dump PHY info
     printf("phy_info:\n");
-    dump_flash_sector(start_sector, PHY_INFO_SIZE);
+    dump_flash_sector(start_sector, sizeof(sdk_phy_info_t));
     printf("\ng_ic saved 0:\n");
     dump_flash_sector(start_sector + 1, sizeof(struct sdk_g_ic_saved_st));
     printf("\ng_ic saved 1:\n");

core/debug_dumps.c

@@ -11,6 +11,8 @@
 #include <stdio.h>
 #include <FreeRTOS.h>
 #include <task.h>
+#include <malloc.h>
+#include <unistd.h>
 
 #include "debug_dumps.h"
 #include "common_macros.h"
@@ -19,13 +21,19 @@
 #include "esp/uart.h"
 #include "espressif/esp_common.h"
 #include "sdk_internal.h"
+#include "esplibs/libmain.h"
 
 /* Forward declarations */
 static void IRAM fatal_handler_prelude(void);
-/* Inner parts of crash handlers marked noinline to ensure they don't inline into IRAM. */
+
-static void __attribute__((noinline)) __attribute__((noreturn)) fatal_exception_handler_inner(uint32_t *sp, bool registers_saved_on_stack);
+/* Inner parts of crash handlers */
+typedef void __attribute__((noreturn)) (*fatal_exception_handler_fn)(uint32_t *sp, bool registers_saved_on_stack);
+static void __attribute__((noreturn)) standard_fatal_exception_handler_inner(uint32_t *sp, bool registers_saved_on_stack);
+static void __attribute__((noreturn)) second_fatal_exception_handler_inner(uint32_t *sp, bool registers_saved_on_stack);
 static void __attribute__((noinline)) __attribute__((noreturn)) abort_handler_inner(uint32_t *caller, uint32_t *sp);
 
+static IRAM_DATA fatal_exception_handler_fn fatal_exception_handler_inner = standard_fatal_exception_handler_inner;
+
 /* fatal_exception_handler called from any unhandled user exception
  *
  * (similar to a hard fault on other processor architectures)
@@ -36,7 +44,8 @@ static void __attribute__((noinline)) __attribute__((noreturn)) abort_handler_in
  */
 void IRAM __attribute__((noreturn)) fatal_exception_handler(uint32_t *sp, bool registers_saved_on_stack) {
     fatal_handler_prelude();
-    fatal_exception_handler_inner(sp, registers_saved_on_stack);
+    fatal_exception_handler_fn inner_fn = fatal_exception_handler_inner;
+    inner_fn(sp, registers_saved_on_stack);
 }
 
 /* Abort implementation
@@ -130,6 +139,12 @@ void dump_registers_in_exception_handler(uint32_t *sp) {
     printf("SAR %08x\n", saved[0x13]);
 }
 
+static void __attribute__((noreturn)) post_crash_reset(void) {
+    uart_flush_txfifo(0);
+    uart_flush_txfifo(1);
+    sdk_system_restart_in_nmi();
+    while(1) {}
+}
 
 /* Prelude ensures exceptions/NMI off and flash is mapped, allowing
    calls to non-IRAM functions.
@@ -148,7 +163,10 @@ static void IRAM fatal_handler_prelude(void) {
 /* Main part of fatal exception handler, is run from flash to save
    some IRAM.
 */
-static void fatal_exception_handler_inner(uint32_t *sp, bool registers_saved_on_stack) {
+static void standard_fatal_exception_handler_inner(uint32_t *sp, bool registers_saved_on_stack) {
+    /* Replace the fatal exception handler 'inner' function so we
+       don't end up in a crash loop if this handler crashes. */
+    fatal_exception_handler_inner = second_fatal_exception_handler_inner;
     dump_excinfo();
     if (sp) {
         if (registers_saved_on_stack) {
@@ -156,10 +174,52 @@ static void fatal_exception_handler_inner(uint32_t *sp, bool registers_saved_on_
         }
         dump_stack(sp);
     }
-    uart_flush_txfifo(0);
+    dump_heapinfo();
-    uart_flush_txfifo(1);
+    post_crash_reset();
-    sdk_system_restart_in_nmi();
+}
-    while(1) {}
+
+/* This is the exception handler that gets called if a crash occurs inside the standard handler,
+   so we don't end up in a crash loop. It doesn't rely on contents of stack or heap.
+*/
+static void second_fatal_exception_handler_inner(uint32_t *sp, bool registers_saved_on_stack) {
+    dump_excinfo();
+    printf("Second fatal exception occured inside fatal exception handler. Can't continue.\n");
+    post_crash_reset();
+}
+
+void dump_heapinfo(void)
+{
+    extern char _heap_start;
+    extern uint32_t xPortSupervisorStackPointer;
+    struct mallinfo mi = mallinfo();
+    uint32_t brk_val = (uint32_t) sbrk(0);
+    uint32_t sp = xPortSupervisorStackPointer;
+    if(sp == 0) {
+        SP(sp);
+    }
+
+    /* Total free heap is all memory that could be allocated via
+       malloc (assuming fragmentation doesn't become a problem) */
+    printf("\nFree Heap: %d\n", sp - brk_val + mi.fordblks);
+
+    /* delta between brk & supervisor sp is the contiguous memory
+       region that is available to be put into heap space via
+       brk(). */
+    printf("_heap_start %p brk 0x%08x supervisor sp 0x%08x sp-brk %d bytes\n",
+           &_heap_start, brk_val, sp, sp-brk_val);
+
+    /* arena/fordblks/uordblks determines the amount of free space
+      inside the heap region already added via brk(). May be
+      fragmented.
+
+       The values in parentheses are the values used internally by
+       nano-mallocr.c, the field names outside parentheses are the
+       POSIX compliant field names of the mallinfo structure.
+
+       "arena" should be equal to brk-_heap_start ie total size available.
+     */
+    printf("arena (total_size) %d fordblks (free_size) %d uordblocks (used_size) %d\n",
+           mi.arena, mi.fordblks, mi.uordblks);
 }
 
 /* Main part of abort handler, can be run from flash to save some
@@ -168,8 +228,6 @@ static void fatal_exception_handler_inner(uint32_t *sp, bool registers_saved_on_
 static void abort_handler_inner(uint32_t *caller, uint32_t *sp) {
     printf("abort() invoked at %p.\n", caller);
     dump_stack(sp);
-    uart_flush_txfifo(0);
+    dump_heapinfo();
-    uart_flush_txfifo(1);
+    post_crash_reset();
-    sdk_system_restart_in_nmi();
-    while(1) {}
 }

core/esp_phy.c

@@ -0,0 +1,32 @@
+/** esp/phy.h
+ *
+ * PHY hardware management functions.
+ *
+ * Part of esp-open-rtos
+ * Copyright (C) 2016 ChefSteps, Inc
+ * BSD Licensed as described in the file LICENSE
+ */
+#include <esp/phy.h>
+#include <esp/gpio.h>
+
+void bt_coexist_configure(bt_coexist_mode_t mode, uint8_t bt_active_pin, uint8_t bt_priority_pin)
+{
+    /* Disable coexistence entirely before changing pin assignments */
+    GPIO.OUT &= ~(GPIO_OUT_BT_COEXIST_MASK);
+    uint32_t new_mask = 0;
+
+    new_mask = VAL2FIELD_M(GPIO_OUT_BT_ACTIVE_PIN, bt_active_pin) +
+        VAL2FIELD_M(GPIO_OUT_BT_PRIORITY_PIN, bt_priority_pin);
+
+    if(mode == BT_COEXIST_USE_BT_ACTIVE || mode == BT_COEXIST_USE_BT_ACTIVE_PRIORITY) {
+        gpio_enable(bt_active_pin, GPIO_INPUT);
+        new_mask |= GPIO_OUT_BT_ACTIVE_ENABLE;
+    }
+    if(mode == BT_COEXIST_USE_BT_ACTIVE_PRIORITY) {
+        gpio_enable(bt_priority_pin, GPIO_INPUT);
+        new_mask |= GPIO_OUT_BT_PRIORITY_ENABLE;
+    }
+    GPIO.OUT |= new_mask;
+}
+
+

core/include/common_macros.h

@@ -37,15 +37,71 @@
 #define VAL2FIELD_M(fieldname, value) (((value) & fieldname##_M) << fieldname##_S)
 #define SET_FIELD_M(regbits, fieldname, value) (((regbits) & ~FIELD_MASK(fieldname)) | VAL2FIELD_M(fieldname, value))
 
-/* Use this macro to store constant values in IROM flash instead
+/* Use the IRAM macro to place functions into Instruction RAM (IRAM)
-   of having them loaded into rodata (which resides in DRAM)
+   instead of flash (aka irom).
 
-   Unlike the ESP8266 SDK you don't need an attribute like this for
+   (This is the opposite to the Espressif SDK, where functions default
-   standard functions. They're stored in flash by default. But
+   to being placed in IRAM but the ICACHE_FLASH_ATTR attribute will
-   variables need them.
+   place them in flash.)
 
-   Important to note: IROM flash can only be accessed via 32-bit word
+   Use the IRAM attribute for functions which are called when the
-   aligned reads. It's up to the user of this attribute to ensure this.
+   flash may not be available (for example during NMI exceptions), or
+   for functions which are called very frequently and need high
+   performance.
+
+   Usage example:
+
+   void IRAM high_performance_function(void)
+   {
+       // do important thing here
+   }
+
+   Bear in mind IRAM is limited (32KB), compared to up to 1MB of flash.
+*/
+#define IRAM __attribute__((section(".iram1.text")))
+
+/* Use the RAM macro to place constant data (rodata) into RAM (data
+   RAM) instead of the default placement in flash. This is useful for
+   constant data which needs high performance access.
+
+   Usage example:
+
+   const RAM uint8_t constants[] = { 1, 2, 3, 7 };
+
+   When placing string literals in RAM, they need to be declared with
+   the type "const char[]" not "const char *"
+
+   Usage example:
+
+   const RAM char hello_world[] = "Hello World";
+*/
+#define RAM __attribute__((section(".data")))
+
+/* Use the IRAM_DATA macro to place data into Instruction RAM (IRAM)
+   instead of the default of flash (for constant data) or data RAM
+   (for non-constant data).
+
+   This may be useful to free up data RAM. However all data read from
+   any instruction space (either IRAM or Flash) must be 32-bit aligned
+   word reads. Reading unaligned data stored with IRAM_DATA will be
+   slower than reading data stored in RAM. You can't perform unaligned
+   writes to IRAM.
+*/
+#define IRAM_DATA __attribute__((section(".iram1.data")))
+
+/* Use the IROM macro to store constant values in IROM flash. In
+  esp-open-rtos this is already the default location for most constant
+  data (rodata), so you don't need this attribute in 99% of cases.
+
+  The exceptions are to mark data in the core & freertos libraries,
+  where the default for constant data storage is RAM.
+
+  (Unlike the Espressif SDK you don't need to use an attribute like
+  ICACHE_FLASH_ATTR for functions, they go into flash by default.)
+
+  Important to note: IROM flash is accessed via 32-bit word aligned
+  reads. esp-open-rtos does some magic to "fix" unaligned reads, but
+  performance is reduced.
 */
 #ifdef	__cplusplus
     #define IROM __attribute__((section(".irom0.literal")))
@@ -53,30 +109,5 @@
     #define IROM __attribute__((section(".irom0.literal"))) const
 #endif
 
-/* Use this macro to place functions into Instruction RAM (IRAM)
-   instead of flash memory (IROM).
-
-   This is useful for functions which are called when the flash may
-   not be available (for example during NMI exceptions), or for
-   functions which are called very frequently and need high
-   performance.
-
-   Bear in mind IRAM is limited (32KB), compared to up to 1MB of flash.
-*/
-#define IRAM __attribute__((section(".iram1.text")))
-
-/* Use this macro to place read-only data into Instruction RAM (IRAM)
-   instead of loaded into rodata which resides in DRAM.
-
-   This may be useful to free up data RAM. However all data read from
-   the instruction space must be 32-bit aligned word reads
-   (non-aligned reads will use an interrupt routine to "fix" them and
-   still work, but are very slow..
-*/
-#ifdef	__cplusplus
-    #define IRAM_DATA __attribute__((section(".iram1.rodata")))
-#else
-    #define IRAM_DATA __attribute__((section(".iram1.rodata"))) const
-#endif
 
 #endif

core/include/debug_dumps.h

@@ -10,9 +10,12 @@
 #define _DEBUG_DUMPS_H
 #include <stdint.h>
 
-/* Dump stack memory starting from stack pointer address sp. */
+/* Dump stack memory to stdout, starting from stack pointer address sp. */
 void dump_stack(uint32_t *sp);
 
+/* Dump heap statistics to stdout */
+void dump_heapinfo(void);
+
 /* Called from exception_vectors.S when a fatal exception occurs.
 
    Probably not useful to be called in other contexts.

core/include/esp/gpio.h

@@ -81,9 +81,9 @@ static inline void gpio_set_output_on_sleep(const uint8_t gpio_num, bool enabled
 static inline void gpio_write(const uint8_t gpio_num, const bool set)
 {
     if (set)
-        GPIO.OUT_SET = BIT(gpio_num);
+        GPIO.OUT_SET = BIT(gpio_num) & GPIO_OUT_PIN_MASK;
     else
-        GPIO.OUT_CLEAR = BIT(gpio_num);
+        GPIO.OUT_CLEAR = BIT(gpio_num) & GPIO_OUT_PIN_MASK;
 }
 
 /* Toggle output of a pin
@@ -102,9 +102,9 @@ static inline void gpio_toggle(const uint8_t gpio_num)
        task's pins, without needing to disable/enable interrupts.
     */
     if(GPIO.OUT & BIT(gpio_num))
-        GPIO.OUT_CLEAR = BIT(gpio_num);
+        GPIO.OUT_CLEAR = BIT(gpio_num) & GPIO_OUT_PIN_MASK;
     else
-        GPIO.OUT_SET = BIT(gpio_num);
+        GPIO.OUT_SET = BIT(gpio_num) & GPIO_OUT_PIN_MASK;
 }
 
 /* Read input value of a GPIO pin.

core/include/esp/gpio_regs.h

@@ -61,6 +61,21 @@ struct GPIO_REGS {
 
 _Static_assert(sizeof(struct GPIO_REGS) == 0x74, "GPIO_REGS is the wrong size");
 
+/* Details for additional OUT register fields */
+
+/* Bottom 16 bits of GPIO.OUT are for GPIOs 0-15, but upper 16 bits
+   are used to configure the input signalling pins for Bluetooth
+   Coexistence config (see esp/phy.h for a wrapper function).
+*/
+#define GPIO_OUT_PIN_MASK 0x0000FFFF
+#define GPIO_OUT_BT_COEXIST_MASK 0x03FF0000
+#define GPIO_OUT_BT_ACTIVE_ENABLE BIT(24)
+#define GPIO_OUT_BT_PRIORITY_ENABLE BIT(25)
+#define GPIO_OUT_BT_ACTIVE_PIN_M 0x0F
+#define GPIO_OUT_BT_ACTIVE_PIN_S 16
+#define GPIO_OUT_BT_PRIORITY_PIN_M 0x0F
+#define GPIO_OUT_BT_PRIORITY_PIN_S 20
+
 /* Details for CONF[i] registers */
 
 /* GPIO.CONF[i] control the pin behavior for the corresponding GPIO in/output.

core/include/esp/phy.h

@@ -0,0 +1,58 @@
+/** esp/phy.h
+ *
+ * PHY hardware management functions.
+ *
+ * These are not enough to configure the ESP8266 PHY by themselves
+ * (yet), but they provide utilities to modify the configuration set
+ * up via the SDK.
+ *
+ * Functions implemented here deal directly with the hardware, not the
+ * SDK software layers.
+ *
+ * Part of esp-open-rtos
+ * Copyright (C) 2016 ChefSteps, Inc
+ * BSD Licensed as described in the file LICENSE
+ */
+#ifndef _ESP_PHY_H
+#define _ESP_PHY_H
+
+#include <esp/types.h>
+#include <common_macros.h>
+
+#include <stdint.h>
+
+typedef enum {
+    BT_COEXIST_NONE,
+    BT_COEXIST_USE_BT_ACTIVE,
+    BT_COEXIST_USE_BT_ACTIVE_PRIORITY,
+} bt_coexist_mode_t;
+
+/** Override the Bluetooth Coexistence BT_ACTIVE pin setting
+    taken from the phy_info structure.
+
+    This enables other pins to be used for Bluetooth Coexistence
+    signals (rather than just the two provided for by phy_info). (Note
+    that not that not all pins are confirmed to work, GPIO 0 is
+    confirmed not usable as the SDK configures it as the WLAN_ACTIVE
+    output - even if you change the pin mode the SDK will change it
+    back.)
+
+    To change pins and have coexistence work successfully the BT
+    coexistence feature must be enabled in the phy_info configuration
+    (get_default_phy_info()). You can then modify the initial
+    configuration by calling this function from your own user_init
+    function.
+
+    (Eventually we should be able to support enough PHY registers
+    to enable coexistence without SDK support at all, but not yet.)
+
+    This function will enable bt_active_pin & bt_priority_as GPIO
+    inputs, according to the mode parameter.
+
+    Remember that the default Bluetooth Coexistence pins will be
+    configured as GPIOs by the SDK already, so you may want to
+    reconfigure/re-iomux them after calling this function.
+*/
+void bt_coexist_configure(bt_coexist_mode_t mode, uint8_t bt_active_pin, uint8_t bt_priority_pin);
+
+#endif

core/include/sdk_internal.h

@@ -4,6 +4,7 @@
 #include "espressif/esp_wifi.h"
 #include "espressif/spi_flash.h"
 #include "etstimer.h"
+#include "espressif/phy_info.h"
 #include "lwip/netif.h"
 
 ///////////////////////////////////////////////////////////////////////////////
@@ -224,7 +225,7 @@ void sdk_phy_enable_agc(void);
 void sdk_pm_attach(void);
 void sdk_pp_attach(void);
 void sdk_pp_soft_wdt_init(void);
-int sdk_register_chipv6_phy(uint8_t *);
+int sdk_register_chipv6_phy(sdk_phy_info_t *);
 void sdk_sleep_reset_analog_rtcreg_8266(void);
 uint32_t sdk_system_get_checksum(uint8_t *, uint32_t);
 void sdk_wDevEnableRx(void);

core/include/xtensa_ops.h

@@ -11,27 +11,12 @@
 #ifndef _XTENSA_OPS_H
 #define _XTENSA_OPS_H
 
-// GCC macros for reading, writing, and exchanging Xtensa processor special
-// registers:
-
-#define RSR(var, reg) asm volatile ("rsr %0, " #reg : "=r" (var))
-#define WSR(var, reg) asm volatile ("wsr %0, " #reg : : "r" (var))
-#define XSR(var, reg) asm volatile ("xsr %0, " #reg : "+r" (var))
-
-// GCC macros for performing associated "*sync" opcodes
-
-#define ISYNC() asm volatile ( "isync" )
-#define RSYNC() asm volatile ( "rsync" )
-#define ESYNC() asm volatile ( "esync" )
-#define DSYNC() asm volatile ( "dsync" )
-
-
 /* Read stack pointer to variable.
  *
  * Note that the compiler will push a stack frame (minimum 16 bytes)
  * in the prelude of a C function that calls any other functions.
  */
-#define SP(var) asm volatile ("mov %0, a1" : "=r" (var));
+#define SP(var) asm volatile ("mov %0, a1" : "=r" (var))
 
 /* Read the function return address to a variable.
  *
@@ -40,4 +25,17 @@
  */
 #define RETADDR(var) asm volatile ("mov %0, a0" : "=r" (var))
 
+/* GCC macros for reading, writing, and exchanging Xtensa processor special
+ * registers:
+ */
+#define RSR(var, reg) asm volatile ("rsr %0, " #reg : "=r" (var));
+#define WSR(var, reg) asm volatile ("wsr %0, " #reg : : "r" (var));
+#define XSR(var, reg) asm volatile ("xsr %0, " #reg : "+r" (var));
+
+// GCC macros for performing associated "*sync" opcodes
+#define ISYNC() asm volatile ( "isync" )
+#define RSYNC() asm volatile ( "rsync" )
+#define ESYNC() asm volatile ( "esync" )
+#define DSYNC() asm volatile ( "dsync" )
+
 #endif /* _XTENSA_OPS_H */

core/newlib_syscalls.c

@@ -9,9 +9,12 @@
 #include <sys/errno.h>
 #include <espressif/sdk_private.h>
 #include <common_macros.h>
+#include <xtensa_ops.h>
 #include <esp/uart.h>
 #include <stdlib.h>
 
+extern void *xPortSupervisorStackPointer;
+
 IRAM caddr_t _sbrk_r (struct _reent *r, int incr)
 {
     extern char   _heap_start; /* linker script defined */
@@ -21,13 +24,17 @@ IRAM caddr_t _sbrk_r (struct _reent *r, int incr)
     if (heap_end == NULL)
 	heap_end = &_heap_start;
     prev_heap_end = heap_end;
-    /* TODO: Check stack collision
+
-       if (heap_end + incr > stack_ptr)
+    intptr_t sp = (intptr_t)xPortSupervisorStackPointer;
-       {
+    if(sp == 0) /* scheduler not started */
-       _write (1, "_sbrk: Heap collided with stack\n", 32);
+        SP(sp);
-       abort();
+
-       }
+    if ((intptr_t)heap_end + incr >= sp)
-    */
+    {
+        r->_errno = ENOMEM;
+        return (caddr_t)-1;
+    }
+
     heap_end += incr;
 
     return (caddr_t) prev_heap_end;

core/phy_info.c

@@ -0,0 +1,161 @@
+/* Routines to allow custom access to the Internal Espressif
+   SDK PHY datastructures.
+
+   Matches espressif/phy_internal.h
+
+   Part of esp-open-rtos. Copyright (C) 2016 Angus Gratton,
+   BSD Licensed as described in the file LICENSE.
+ */
+#include <espressif/phy_info.h>
+#include <espressif/esp_common.h>
+#include <common_macros.h>
+#include <string.h>
+
+static const sdk_phy_info_t IROM default_phy_info = {
+    ._reserved00 = { 0x05, 0x00, 0x04, 0x02, 0x05 },
+    .version = 5,
+    ._reserved06 = { 0x05, 0x02, 0x05, 0x00, 0x04, 0x05, 0x05, 0x04,
+                     0x05, 0x05, 0x04,-0x02,-0x03,-0x01,-0x10,-0x10,
+                     -0x10,-0x20,-0x20, -0x20},
+    .spur_freq_primary = 225,
+    .spur_freq_divisor = 10,
+    .spur_freq_en_h = 0xFF,
+    .spur_freq_en_l = 0xFF,
+
+    ._reserved1e = { 0xf8, 0, 0xf8, 0xf8 },
+
+    .target_power = { 82, 78, 74, 68, 64, 56 },
+    .target_power_index_mcs = { 0, 0, 1, 1, 2, 3, 4, 5 },
+
+    .crystal_freq = CRYSTAL_FREQ_26M,
+
+    .sdio_config = SDIO_CONFIG_AUTO,
+
+    .bt_coexist_config = BT_COEXIST_CONFIG_NONE,
+    .bt_coexist_protocol = BT_COEXIST_PROTOCOL_WIFI_ONLY,
+
+    .dual_ant_config = DUAL_ANT_CONFIG_NONE,
+
+    ._reserved34 = 0x02,
+
+    .crystal_sleep = CRYSTAL_SLEEP_OFF,
+
+    .spur_freq_2_primary = 225,
+    .spur_freq_2_divisor = 10,
+    .spur_freq_2_en_h = 0x00,
+    .spur_freq_2_en_l = 0x00,
+    .spur_freq_cfg_msb = 0x00,
+    .spur_freq_2_cfg_msb = 0x00,
+    .spur_freq_3_cfg = 0x0000,
+    .spur_freq_4_cfg = 0x0000,
+
+    ._reserved4a = { 0x01, 0x93, 0x43, 0x00 },
+
+    .low_power_en = false,
+    .lp_atten_stage01 = LP_ATTEN_STAGE01_23DB,
+    .lp_atten_bb = 0,
+
+    .pwr_ind_11b_en = false,
+    .pwr_ind_11b_0 = 0,
+    .pwr_ind_11b_1 = 0,
+
+    /* Nominal 3.3V VCC. NOTE: This value is 0 in the
+       esp-open-rtos SDK default config sector, and may be unused
+       by that version of the SDK?
+    */
+    .pa_vdd = 33,
+
+    /* Note: untested with the esp-open-rtos SDK default config sector, may be unused? */
+    .freq_correct_mode = FREQ_CORRECT_DISABLE,
+    .force_freq_offset = 0,
+
+    /* Note: is zero with the esp-open-rtos SDK default config sector, may be unused? */
+    .rf_cal_mode = RF_CAL_MODE_SAVED,
+};
+
+void get_default_phy_info(sdk_phy_info_t *info) __attribute__((weak, alias("get_sdk_default_phy_info")));
+
+void get_sdk_default_phy_info(sdk_phy_info_t *info)
+{
+    memcpy(info, &default_phy_info, sizeof(sdk_phy_info_t));
+}
+
+void read_saved_phy_info(sdk_phy_info_t *info)
+{
+    sdk_spi_flash_read(sdk_flashchip.chip_size - sdk_flashchip.sector_size * 4, (uint32_t *)info, sizeof(sdk_phy_info_t));
+}
+
+void write_saved_phy_info(const sdk_phy_info_t *info)
+{
+    sdk_spi_flash_write(sdk_flashchip.chip_size - sdk_flashchip.sector_size * 4, (uint32_t *)info, sizeof(sdk_phy_info_t));
+}
+
+void dump_phy_info(const sdk_phy_info_t *info, bool raw)
+{
+    printf("version=%d\n", info->version);
+    printf("spur_freq = %.3f (%d/%d)\n",
+           (float)info->spur_freq_primary / info->spur_freq_divisor,
+           info->spur_freq_primary,
+           info->spur_freq_divisor);
+    printf("spur_freq_en = 0x%02x 0x%02x\n", info->spur_freq_en_h,
+           info->spur_freq_en_l);
+    printf("target_power\n");
+    for(int i = 0; i < 6; i++) {
+        printf("  %d: %.2fdB (raw 0x%02x)\n", i,
+               info->target_power[i]/4.0,
+               info->target_power[i]);
+    }
+    printf("target_power_index_mcs:");
+    for(int i = 0; i < 8; i++) {
+        printf(" %d%c", info->target_power_index_mcs[i],
+               i == 7 ? '\n' : ',');
+    }
+
+    printf("crystal_freq: %s (raw %d)\n",
+           (info->crystal_freq == CRYSTAL_FREQ_40M ? "40MHz" :
+            (info->crystal_freq == CRYSTAL_FREQ_26M ? "26MHz" :
+             (info->crystal_freq == CRYSTAL_FREQ_24M ? "24MHz" : "???"))),
+           info->crystal_freq);
+
+    printf("sdio_config: %d\n", info->sdio_config);
+    printf("bt_coexist config: %d protocol: 0x%02x\n",
+           info->bt_coexist_config, info->bt_coexist_protocol);
+    printf("dual_ant_config: %d\n", info->dual_ant_config);
+
+    printf("crystal_sleep: %d\n", info->crystal_sleep);
+
+    printf("spur_freq_2 = %.3f (%d/%d)\n",
+           (float)info->spur_freq_2_primary / info->spur_freq_2_divisor,
+           info->spur_freq_2_primary,
+           info->spur_freq_2_divisor);
+    printf("spur_freq_2_en = 0x%02x 0x%02x\n", info->spur_freq_2_en_h,
+           info->spur_freq_2_en_l);
+
+    printf("spur_freq_cfg_msb = 0x%02x\n", info->spur_freq_cfg_msb);
+    printf("spur_freq_2_)cfg_msb = 0x%02x\n", info->spur_freq_2_cfg_msb);
+    printf("spur_freq_3_cfg = 0x%04x\n", info->spur_freq_3_cfg);
+    printf("spur_freq_4_cfg = 0x%04x\n", info->spur_freq_4_cfg);
+
+    printf("low_power_en = %d\n", info->low_power_en);
+    printf("lp_atten_stage01 = 0x%02x\n", info->lp_atten_stage01);
+    printf("lp_atten_bb = %.2f (raw 0x%02x)\n", info->lp_atten_bb / 4.0,
+           info->lp_atten_bb);
+
+    printf("pa_vdd = %d\n", info->pa_vdd);
+
+    printf("freq_correct_mode = 0x%02x\n", info->freq_correct_mode);
+    printf("force_freq_offset = %d\n", info->force_freq_offset);
+    printf("rf_cal_mode = 0x%02x\n", info->rf_cal_mode);
+
+    if(raw) {
+        printf("Raw values:");
+        uint8_t *p = (uint8_t *)info;
+        for(int i = 0; i < sizeof(sdk_phy_info_t); i ++) {
+            if(i % 8 == 0) {
+                printf("\n0x%02x:", i);
+            }
+            printf(" %02x", p[i]);
+        }
+        printf("\n\n");
+    }
+}

core/spiflash-cache-enable.S

@@ -12,8 +12,6 @@
  * Copyright (C) 2015 Superhouse Automation Pty Ltd
  * BSD Licensed as described in the file LICENSE
 */
-#ifdef OTA
-
 #define RBOOT_CONFIG_BASE (0x40200000 + 0x1000)
 #define RBOOT_ROMS_OFFS 0x8 /* offset of rboot_config_t.roms array in config */
 
@@ -74,5 +72,3 @@ Cache_Read_Enable:
 	movi a0, cache_return_save /* restore a0 return address */
 	l32i a0, a0, 0
 	ret.n
-
-#endif

examples/dht_sensor/Makefile

@@ -0,0 +1,4 @@
+PROGRAM=dht_sensor
+EXTRA_COMPONENTS = extras/dht
+include ../../common.mk
+

examples/dht_sensor/dht_sensor.c

@@ -0,0 +1,46 @@
+/* 
+ *
+ * This sample code is in the public domain.
+ */
+#include "espressif/esp_common.h"
+#include "esp/uart.h"
+#include "FreeRTOS.h"
+#include "task.h"
+#include "dht.h"
+#include "esp8266.h"
+
+/* An example using the ubiquitous DHT** humidity sensors
+ * to read and print a new temperature and humidity measurement
+ * from a sensor attached to GPIO pin 4.
+ */
+int const dht_gpio = 4;
+
+void dhtMeasurementTask(void *pvParameters)
+{
+  int8_t temperature = 0;
+  int8_t humidity = 0;
+
+  // DHT sensors that come mounted on a PCB generally have
+  // pull-up resistors on the data pin.  It is recommended
+  // to provide an external pull-up resistor otherwise...
+  gpio_set_pullup(dht_gpio, false, false);
+
+  while(1) {
+
+    if (dht_fetch_data(dht_gpio, &humidity, &temperature)) {
+      printf("Humidity: %i%% Temp: %iC\n", humidity, temperature);
+    } else {
+      printf("Could not read data from sensor...");
+    }
+
+    // Three second delay...
+    vTaskDelay(3000 / portTICK_RATE_MS);
+  }
+}
+
+void user_init(void)
+{
+    uart_set_baud(0, 115200);
+    xTaskCreate(dhtMeasurementTask, (signed char *)"dhtMeasurementTask", 256, NULL, 2, NULL);
+}
+

examples/experiments/unaligned_load/unaligned_load.c

@@ -13,9 +13,9 @@
 
 #define TESTSTRING "O hai there! %d %d %d"
 
-const char *dramtest = TESTSTRING;
+const RAM char dramtest[] = TESTSTRING;
-const __attribute__((section(".iram1.notrodata"))) char iramtest[] = TESTSTRING;
+const char *iromtest = TESTSTRING;
-const __attribute__((section(".text.notrodata"))) char iromtest[] = TESTSTRING;
+const IRAM_DATA char iramtest[] = TESTSTRING;
 
 static inline uint32_t get_ccount (void)
 {

examples/json_jsmn_simple/Makefile

@@ -0,0 +1,4 @@
+# Simple makefile for simple example
+PROGRAM=json_jsmn_simple
+EXTRA_COMPONENTS = extras/jsmn
+include ../../common.mk

examples/json_jsmn_simple/json_jsmn_simple.c

@@ -0,0 +1,112 @@
+/**
+ * Copyright (c) 2010 Serge A. Zaitsev and
+ * 2016 Drasko DRASKOVIC <drasko.draskovic@gmail.com>
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "espressif/esp_common.h"
+#include "esp/uart.h"
+#include "FreeRTOS.h"
+#include "task.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "jsmn.h"
+
+/**
+ * A small example of jsmn parsing when JSON structure is known and number of
+ * tokens is predictable.
+ */
+
+const char *JSON_STRING =
+	"{\"user\": \"johndoe\", \"admin\": false, \"uid\": 1000,\n  "
+	"\"groups\": [\"users\", \"wheel\", \"audio\", \"video\"]}";
+
+static int jsoneq(const char *json, jsmntok_t *tok, const char *s) {
+	if (tok->type == JSMN_STRING && (int) strlen(s) == tok->end - tok->start &&
+			strncmp(json + tok->start, s, tok->end - tok->start) == 0) {
+		return 0;
+	}
+	return -1;
+}
+
+void json_test(void *pvParameters)
+{
+    int i;
+	int r;
+	jsmn_parser p;
+	jsmntok_t t[128]; /* We expect no more than 128 tokens */
+
+	jsmn_init(&p);
+	r = jsmn_parse(&p, JSON_STRING, strlen(JSON_STRING), t, sizeof(t)/sizeof(t[0]));
+	if (r < 0) {
+		printf("Failed to parse JSON: %d\n", r);
+	}
+
+	/* Assume the top-level element is an object */
+	if (r < 1 || t[0].type != JSMN_OBJECT) {
+		printf("Object expected\n");
+	}
+
+	/* Loop over all keys of the root object */
+	for (i = 1; i < r; i++) {
+		if (jsoneq(JSON_STRING, &t[i], "user") == 0) {
+			/* We may use strndup() to fetch string value */
+			printf("- User: %.*s\n", t[i+1].end-t[i+1].start,
+					JSON_STRING + t[i+1].start);
+			i++;
+		} else if (jsoneq(JSON_STRING, &t[i], "admin") == 0) {
+			/* We may additionally check if the value is either "true" or "false" */
+			printf("- Admin: %.*s\n", t[i+1].end-t[i+1].start,
+					JSON_STRING + t[i+1].start);
+			i++;
+		} else if (jsoneq(JSON_STRING, &t[i], "uid") == 0) {
+			/* We may want to do strtol() here to get numeric value */
+			printf("- UID: %.*s\n", t[i+1].end-t[i+1].start,
+					JSON_STRING + t[i+1].start);
+			i++;
+		} else if (jsoneq(JSON_STRING, &t[i], "groups") == 0) {
+			int j;
+			printf("- Groups:\n");
+			if (t[i+1].type != JSMN_ARRAY) {
+				continue; /* We expect groups to be an array of strings */
+			}
+			for (j = 0; j < t[i+1].size; j++) {
+				jsmntok_t *g = &t[i+j+2];
+				printf("  * %.*s\n", g->end - g->start, JSON_STRING + g->start);
+			}
+			i += t[i+1].size + 1;
+		} else {
+			printf("Unexpected key: %.*s\n", t[i].end-t[i].start,
+					JSON_STRING + t[i].start);
+		}
+	}
+
+    while (1)
+        ;
+}
+
+
+void user_init(void)
+{
+    uart_set_baud(0, 115200);
+    printf("SDK version:%s\n", sdk_system_get_sdk_version());
+    xTaskCreate(json_test, (signed char *)"jsont", 1024, NULL, 2, NULL);
+}

examples/mqtt_client/mqtt_client.c

@@ -157,6 +157,7 @@ static void  mqtt_task(void *pvParameters)
                 break;
         }
         printf("Connection dropped, request restart\n\r");
+        DisconnectNetwork(&network);
         taskYIELD();
     }
 }

examples/ota_basic/Makefile

@@ -1,5 +1,4 @@
 PROGRAM=ota_basic
-OTA=1
+EXTRA_COMPONENTS=extras/rboot-ota extras/mbedtls
-EXTRA_COMPONENTS=extras/rboot-ota
 include ../../common.mk
 

examples/ota_basic/ota_basic.c

@@ -1,23 +1,121 @@
 /* A very simple OTA example
  *
- * Binds a TCP socket, reads an image from it over TFTP and then flashes live.
+ * Tries to run both a TFTP client and a TFTP server simultaneously, either will accept a TTP firmware and update it.
+ *
+ * Not a realistic OTA setup, this needs adapting (choose either client or server) before you'd want to use it.
  *
  * For more information about esp-open-rtos OTA see https://github.com/SuperHouse/esp-open-rtos/wiki/OTA-Update-Configuration
  *
  * NOT SUITABLE TO PUT ON THE INTERNET OR INTO A PRODUCTION ENVIRONMENT!!!!
  */
+#include <string.h>
 #include "espressif/esp_common.h"
 #include "esp/uart.h"
 #include "FreeRTOS.h"
 #include "task.h"
 #include "esp8266.h"
 #include "ssid_config.h"
+#include "mbedtls/sha256.h"
 
 #include "ota-tftp.h"
-#include "rboot-integration.h"
-#include "rboot.h"
 #include "rboot-api.h"
 
+/* TFTP client will request this image filenames from this server */
+#define TFTP_IMAGE_SERVER "192.168.1.23"
+#define TFTP_IMAGE_FILENAME1 "firmware1.bin"
+#define TFTP_IMAGE_FILENAME2 "firmware2.bin"
+
+/* Output of the command 'sha256sum firmware1.bin' */
+static const char *FIRMWARE1_SHA256 = "88199daff8b9e76975f685ec7f95bc1df3c61bd942a33a54a40707d2a41e5488";
+
+/* Example function to TFTP download a firmware file and verify its SHA256 before
+   booting into it.
+*/
+static void tftpclient_download_and_verify_file1(int slot, rboot_config *conf)
+{
+    printf("Downloading %s to slot %d...\n", TFTP_IMAGE_FILENAME1, slot);
+    int res = ota_tftp_download(TFTP_IMAGE_SERVER, TFTP_PORT+1, TFTP_IMAGE_FILENAME1, 1000, slot, NULL);
+    printf("ota_tftp_download %s result %d\n", TFTP_IMAGE_FILENAME1, res);
+
+    if (res != 0) {
+        return;
+    }
+
+    printf("Looks valid, calculating SHA256...\n");
+    uint32_t length;
+    bool valid = rboot_verify_image(conf->roms[slot], &length, NULL);
+    static mbedtls_sha256_context ctx;
+    mbedtls_sha256_init(&ctx);
+    mbedtls_sha256_starts(&ctx, 0);
+    valid = valid && rboot_digest_image(conf->roms[slot], length, (rboot_digest_update_fn)mbedtls_sha256_update, &ctx);
+    static uint8_t hash_result[32];
+    mbedtls_sha256_finish(&ctx, hash_result);
+    mbedtls_sha256_free(&ctx);
+
+    if(!valid)
+    {
+        printf("Not valid after all :(\n");
+        return;
+    }
+
+    printf("Image SHA256 = ");
+    valid = true;
+    for(int i = 0; i < sizeof(hash_result); i++) {
+        char hexbuf[3];
+        snprintf(hexbuf, 3, "%02x", hash_result[i]);
+        printf(hexbuf);
+        if(strncmp(hexbuf, FIRMWARE1_SHA256+i*2, 2))
+            valid = false;
+    }
+    printf("\n");
+
+    if(!valid) {
+        printf("Downloaded image SHA256 didn't match expected '%s'\n", FIRMWARE1_SHA256);
+        return;
+    }
+
+    printf("SHA256 Matches. Rebooting into slot %d...\n", slot);
+    rboot_set_current_rom(slot);
+    sdk_system_restart();
+}
+
+/* Much simpler function that just downloads a file via TFTP into an rboot slot.
+
+   (
+ */
+static void tftpclient_download_file2(int slot)
+{
+    printf("Downloading %s to slot %d...\n", TFTP_IMAGE_FILENAME2, slot);
+    int res = ota_tftp_download(TFTP_IMAGE_SERVER, TFTP_PORT+1, TFTP_IMAGE_FILENAME2, 1000, slot, NULL);
+    printf("ota_tftp_download %s result %d\n", TFTP_IMAGE_FILENAME2, res);
+}
+
+void tftp_client_task(void *pvParameters)
+{
+    printf("TFTP client task starting...\n");
+    rboot_config conf;
+    conf = rboot_get_config();
+    int slot = (conf.current_rom + 1) % conf.count;
+    printf("Image will be saved in OTA slot %d.\n", slot);
+    if(slot == conf.current_rom) {
+        printf("FATAL ERROR: Only one OTA slot is configured!\n");
+        while(1) {}
+    }
+
+    /* Alternate between trying two different filenames. Probalby want to change this if making a practical
+       example!
+
+       Note: example will reboot into FILENAME1 if it is successfully downloaded, but FILENAME2 is ignored.
+    */
+    while(1) {
+        tftpclient_download_and_verify_file1(slot, &conf);
+        vTaskDelay(5000 / portTICK_RATE_MS);
+
+        tftpclient_download_file2(slot);
+        vTaskDelay(5000 / portTICK_RATE_MS);
+    }
+}
+
 void user_init(void)
 {
     uart_set_baud(0, 115200);
@@ -38,5 +136,7 @@ void user_init(void)
     sdk_wifi_set_opmode(STATION_MODE);
     sdk_wifi_station_set_config(&config);
 
+    printf("Starting TFTP server...");
     ota_tftp_init_server(TFTP_PORT);
+    xTaskCreate(&tftp_client_task, (signed char *)"tftp_client", 2048, NULL, 2, NULL);
 }

examples/sntp/Makefile

@@ -0,0 +1,6 @@
+# Makefile for the sntp_example program
+
+PROGRAM=sntp_example
+EXTRA_COMPONENTS = extras/sntp
+
+include ../../common.mk

examples/sntp/sntp_example.c

@@ -0,0 +1,79 @@
+/*
+ * Test code for SNTP on esp-open-rtos.
+ *
+ * Jesus Alonso (doragasu)
+ */
+#include <espressif/esp_common.h>
+#include <esp/uart.h>
+
+#include <string.h>
+#include <stdio.h>
+
+#include <FreeRTOS.h>
+#include <task.h>
+
+#include <lwip/err.h>
+#include <lwip/sockets.h>
+#include <lwip/sys.h>
+#include <lwip/netdb.h>
+#include <lwip/dns.h>
+
+#include <ssid_config.h>
+
+/* Add extras/sntp component to makefile for this include to work */
+#include <sntp.h>
+#include <time.h>
+
+#define SNTP_SERVERS 	"0.pool.ntp.org", "1.pool.ntp.org", \
+						"2.pool.ntp.org", "3.pool.ntp.org"
+
+#define vTaskDelayMs(ms)	vTaskDelay((ms)/portTICK_RATE_MS)
+#define UNUSED_ARG(x)	(void)x
+
+void sntp_tsk(void *pvParameters)
+{
+	char *servers[] = {SNTP_SERVERS};
+	UNUSED_ARG(pvParameters);
+
+	/* Wait until we have joined AP and are assigned an IP */
+	while (sdk_wifi_station_get_connect_status() != STATION_GOT_IP) {
+		vTaskDelayMs(100);
+	}
+
+	/* Start SNTP */
+	printf("Starting SNTP... ");
+	/* SNTP will request an update each 5 minutes */
+	sntp_set_update_delay(5*60000);
+	/* Set GMT+1 zone, daylight savings off */
+	const struct timezone tz = {1*60, 0};
+	/* SNTP initialization */
+	sntp_initialize(&tz);
+	/* Servers must be configured right after initialization */
+	sntp_set_servers(servers, sizeof(servers) / sizeof(char*));
+	printf("DONE!\n");
+
+	/* Print date and time each 5 seconds */
+	while(1) {
+		vTaskDelayMs(5000);
+		time_t ts = time(NULL);
+		printf("TIME: %s", ctime(&ts));
+	}
+}
+
+void user_init(void)
+{
+    uart_set_baud(0, 115200);
+    printf("SDK version:%s\n", sdk_system_get_sdk_version());
+
+    struct sdk_station_config config = {
+        .ssid = WIFI_SSID,
+        .password = WIFI_PASS,
+    };
+
+    /* required to call wifi_set_opmode before station_set_config */
+    sdk_wifi_set_opmode(STATION_MODE);
+    sdk_wifi_station_set_config(&config);
+
+    xTaskCreate(sntp_tsk, (signed char *)"SNTP", 1024, NULL, 1, NULL);
+}
+

extras/dht/component.mk

@@ -0,0 +1,10 @@
+# Component makefile for extras/dht
+
+INC_DIRS += $(ROOT)extras/dht
+
+# args for passing into compile rule generation
+extras/dht_INC_DIR =  $(ROOT)extras/dht
+extras/dht_SRC_DIR =  $(ROOT)extras/dht
+
+$(eval $(call component_compile_rules,extras/dht))
+

extras/dht/dht.c

@@ -0,0 +1,144 @@
+/*
+ * Part of esp-open-rtos
+ * Copyright (C) 2016 Jonathan Hartsuiker (https://github.com/jsuiker)
+ * BSD Licensed as described in the file LICENSE
+ *
+ */
+
+#include "dht.h"
+#include "string.h"
+#include "task.h"
+#include "esp/gpio.h"
+
+#include <espressif/esp_misc.h> // sdk_os_delay_us
+
+#ifndef DEBUG_DHT
+#define DEBUG_DHT 0
+#endif
+
+#if DEBUG_DHT
+#define debug(fmt, ...) printf("%s" fmt "\n", "dht: ", ## __VA_ARGS__);
+#else
+#define debug(fmt, ...) /* (do nothing) */
+#endif
+
+/* 
+ *  Note:
+ *  A suitable pull-up resistor should be connected to the selected GPIO line
+ *
+ *  __           ______          _______                              ___________________________
+ *    \    A    /      \   C    /       \   DHT duration_data_low    /                           \
+ *     \_______/   B    \______/    D    \__________________________/   DHT duration_data_high    \__
+ *
+ *
+ *  Initializing communications with the DHT requires four 'phases' as follows:
+ * 
+ *  Phase A - MCU pulls signal low for at least 18000 us
+ *  Phase B - MCU allows signal to float back up and waits 20-40us for DHT to pull it low
+ *  Phase C - DHT pulls signal low for ~80us
+ *  Phase D - DHT lets signal float back up for ~80us
+ *  
+ *  After this, the DHT transmits its first bit by holding the signal low for 50us
+ *  and then letting it float back high for a period of time that depends on the data bit.
+ *  duration_data_high is shorter than 50us for a logic '0' and longer than 50us for logic '1'.
+ *
+ *  There are a total of 40 data bits trasnmitted sequentially. These bits are read into a byte array
+ *  of length 5.  The first and third bytes are humidity (%) and temperature (C), respectively.  Bytes 2 and 4
+ *  are zero-filled and the fifth is a checksum such that:
+ *
+ *  byte_5 == (byte_1 + byte_2 + byte_3 + btye_4) & 0xFF
+ *
+*/
+
+/*  
+ *  @pin                    the selected GPIO pin
+ *  @interval               how frequently the pin state is checked in microseconds
+ *  @timeout                maximum length of time to wait for the expected pin state
+ *  @expected_pin_state     high (true) or low (false) pin state
+ *  @counter                pointer to external uint8_t for tallying the duration waited for the pin state
+*/
+
+bool dht_await_pin_state(uint8_t pin, uint8_t interval, uint8_t timeout, bool expected_pin_state, uint8_t * counter) {
+
+    for (*counter = 0; *counter < timeout; *counter+=interval) {
+        if (gpio_read(pin) == expected_pin_state) return true;
+        sdk_os_delay_us(interval);
+    }
+
+    return false;
+}
+
+/*  
+ *  
+ *  
+ *  @pin                    the selected GPIO pin
+ *  @humidity               pointer to external int8_t to store resulting humidity value
+ *  @temperature            pointer to external int8_t to store resulting temperature value
+*/
+
+bool dht_fetch_data(int8_t pin, int8_t * humidity, int8_t * temperature) {
+    int8_t data[40] = {0};
+    int8_t result[5] = {0};
+    uint8_t i = 0;
+
+    uint8_t init_phase_duration = 0;
+    uint8_t duration_data_low = 0;
+    uint8_t duration_data_high = 0;
+
+    gpio_enable(pin, GPIO_OUT_OPEN_DRAIN);
+
+    taskENTER_CRITICAL();
+
+    // Phase 'A' pulling signal low to initiate read sequence
+    gpio_write(pin, 0);
+    sdk_os_delay_us(20000);
+    gpio_write(pin, 1);
+
+    // Step through Phase 'B' at 2us intervals, 40us max
+    if (dht_await_pin_state(pin, 2, 40, false, &init_phase_duration)) {
+        // Step through Phase 'C ' at 2us intervals, 88us max
+        if (dht_await_pin_state(pin, 2, 88, true, &init_phase_duration)) {
+            // Step through Phase 'D' at 2us intervals, 88us max
+            if (dht_await_pin_state(pin, 2, 88, false, &init_phase_duration)) {
+
+                // Read in each of the 40 bits of data...
+                for (i = 0; i < 40; i++) {
+                    if (dht_await_pin_state(pin, 2, 60, true, &duration_data_low)) {
+                        if (dht_await_pin_state(pin, 2, 75, false, &duration_data_high)) {
+                            data[i] = duration_data_high > duration_data_low;
+                        }
+                    }
+                }
+
+                taskEXIT_CRITICAL();
+
+                for (i = 0; i < 40; i++) {
+                    // Read each bit into 'result' byte array...
+                    result[i/8] <<= 1;
+                    result[i/8] |= data[i];
+                }
+
+                if (result[4] == ((result[0] + result[1] + result[2] + result[3]) & 0xFF)) {
+                    // Data valid, checksum succeeded...
+                    *humidity = result[0];
+                    *temperature = result[2];
+                    debug("Successfully retrieved sensor data...");
+                    return true;
+                } else {
+                    debug("Checksum failed, invalid data received from sensor...");
+                }
+
+            } else {
+                debug("Initialization error, problem in phase 'D'...");
+            }
+        } else {
+            debug("Initialization error, problem in phase 'C'...");
+        }
+    } else {
+        debug("Initialization error, problem in phase 'B'...");
+    }
+    
+    taskEXIT_CRITICAL();
+    return false;
+}
+

extras/dht/dht.h

@@ -0,0 +1,17 @@
+/*
+ * Part of esp-open-rtos
+ * Copyright (C) 2016 Jonathan Hartsuiker (https://github.com/jsuiker)
+ * BSD Licensed as described in the file LICENSE
+ *
+ */
+
+#ifndef __DTH_H__
+#define __DHT_H__
+
+#include "FreeRTOS.h"
+
+bool dht_wait_for_pin_state(uint8_t pin, uint8_t interval, uint8_t timeout, bool expected_pin_sate, uint8_t * counter);
+bool dht_fetch_data(int8_t pin, int8_t * humidity, int8_t * temperature);
+
+#endif
+

extras/jsmn/component.mk

@@ -0,0 +1,10 @@
+# Component makefile for extras/jsmn
+
+# expected anyone using jsmn json component includes it as 'jsmn/jsmn.h'
+INC_DIRS += $(jsmn_ROOT)jsmn
+
+# args for passing into compile rule generation
+jsmn_INC_DIR =
+jsmn_SRC_DIR = $(jsmn_ROOT)jsmn
+
+$(eval $(call component_compile_rules,jsmn))

extras/jsmn/jsmn

@@ -0,0 +1 @@
+Subproject commit bbc6755fce14c713f9bb4ba47c688d15efc1394b

extras/mbedtls/mbedtls

@@ -1 +1 @@
-Subproject commit a7ffc8f7396573bec401e0afcc073137522d5305
+Subproject commit 0a0c22e0efcf2f8f71d7e16712f80b8f77326f72

extras/mbedtls/net_lwip.c

@@ -217,18 +217,14 @@ int mbedtls_net_bind( mbedtls_net_context *ctx, const char *bind_ip, const char
 
 }
 
-#if ( defined(_WIN32) || defined(_WIN32_WCE) ) && !defined(EFIX64) && \
+static int socket_errno( const mbedtls_net_context *ctx )
-    !defined(EFI32)
-/*
- * Check if the requested operation would be blocking on a non-blocking socket
- * and thus 'failed' with a negative return value.
- */
-static int net_would_block( const mbedtls_net_context *ctx )
 {
-    ((void) ctx);
+    int sock_errno = 0;
-    return( WSAGetLastError() == WSAEWOULDBLOCK );
+    u32_t optlen = sizeof(sock_errno);
+    lwip_getsockopt(ctx->fd, SOL_SOCKET, SO_ERROR, &sock_errno, &optlen);
+    return sock_errno;
 }
-#else
+
 /*
  * Check if the requested operation would be blocking on a non-blocking socket
  * and thus 'failed' with a negative return value.
@@ -243,7 +239,8 @@ static int net_would_block( const mbedtls_net_context *ctx )
     if( ( fcntl( ctx->fd, F_GETFL, 0) & O_NONBLOCK ) != O_NONBLOCK )
         return( 0 );
 
-    switch( errno )
+
+    switch( socket_errno(ctx) )
     {
 #if defined EAGAIN
         case EAGAIN:
@@ -255,7 +252,6 @@ static int net_would_block( const mbedtls_net_context *ctx )
     }
     return( 0 );
 }
-#endif /* ( _WIN32 || _WIN32_WCE ) && !EFIX64 && !EFI32 */
 
 /*
  * Accept a connection from a remote client
@@ -401,9 +397,7 @@ void mbedtls_net_usleep( unsigned long usec )
 #endif
 }
 
-/*
+/* Read at most 'len' characters */
- * Read at most 'len' characters
- */
 int mbedtls_net_recv( void *ctx, unsigned char *buf, size_t len )
 {
     int ret;
@@ -419,17 +413,13 @@ int mbedtls_net_recv( void *ctx, unsigned char *buf, size_t len )
         if( net_would_block( ctx ) != 0 )
             return( MBEDTLS_ERR_SSL_WANT_READ );
 
-#if ( defined(_WIN32) || defined(_WIN32_WCE) ) && !defined(EFIX64) && \
+        int sock_errno = socket_errno(ctx);
-    !defined(EFI32)
+
-        if( WSAGetLastError() == WSAECONNRESET )
+        if( sock_errno == EPIPE || sock_errno == ECONNRESET )
-            return( MBEDTLS_ERR_NET_CONN_RESET );
-#else
-        if( errno == EPIPE || errno == ECONNRESET )
             return( MBEDTLS_ERR_NET_CONN_RESET );
 
-        if( errno == EINTR )
+        if( sock_errno == EINTR )
             return( MBEDTLS_ERR_SSL_WANT_READ );
-#endif
 
         return( MBEDTLS_ERR_NET_RECV_FAILED );
     }
@@ -465,14 +455,8 @@ int mbedtls_net_recv_timeout( void *ctx, unsigned char *buf, size_t len,
 
     if( ret < 0 )
     {
-#if ( defined(_WIN32) || defined(_WIN32_WCE) ) && !defined(EFIX64) && \
-    !defined(EFI32)
-        if( WSAGetLastError() == WSAEINTR )
-            return( MBEDTLS_ERR_SSL_WANT_READ );
-#else
         if( errno == EINTR )
             return( MBEDTLS_ERR_SSL_WANT_READ );
-#endif
 
         return( MBEDTLS_ERR_NET_RECV_FAILED );
     }
@@ -499,17 +483,13 @@ int mbedtls_net_send( void *ctx, const unsigned char *buf, size_t len )
         if( net_would_block( ctx ) != 0 )
             return( MBEDTLS_ERR_SSL_WANT_WRITE );
 
-#if ( defined(_WIN32) || defined(_WIN32_WCE) ) && !defined(EFIX64) && \
+        int sock_errno = socket_errno(ctx);
-    !defined(EFI32)
+
-        if( WSAGetLastError() == WSAECONNRESET )
+        if( sock_errno == EPIPE || sock_errno == ECONNRESET )
-            return( MBEDTLS_ERR_NET_CONN_RESET );
-#else
-        if( errno == EPIPE || errno == ECONNRESET )
             return( MBEDTLS_ERR_NET_CONN_RESET );
 
-        if( errno == EINTR )
+        if( sock_errno == EINTR )
             return( MBEDTLS_ERR_SSL_WANT_WRITE );
-#endif
 
         return( MBEDTLS_ERR_NET_SEND_FAILED );
     }

extras/rboot-ota/component.mk

@@ -1,8 +1,9 @@
 # Component makefile for extras/rboot-ota
 
-INC_DIRS += $(rboot-ota_ROOT)
+# global include directories need to find rboot.h for integration, even 
+# when just including rboot-api.h :(
+INC_DIRS += $(rboot-ota_ROOT) $(ROOT)bootloader $(ROOT)bootloader/rboot
 
-# args for passing into compile rule generation
 rboot-ota_SRC_DIR =  $(rboot-ota_ROOT)
 
 $(eval $(call component_compile_rules,rboot-ota))

extras/rboot-ota/ota-tftp.c

@@ -22,12 +22,12 @@
 #include <espressif/esp_system.h>
 
 #include "ota-tftp.h"
-#include "rboot.h"
 #include "rboot-api.h"
 
 #define TFTP_FIRMWARE_FILE "firmware.bin"
 #define TFTP_OCTET_MODE "octet" /* non-case-sensitive */
 
+#define TFTP_OP_RRQ 1
 #define TFTP_OP_WRQ 2
 #define TFTP_OP_DATA 3
 #define TFTP_OP_ACK 4
@@ -43,8 +43,9 @@
 
 static void tftp_task(void *port_p);
 static char *tftp_get_field(int field, struct netbuf *netbuf);
-static err_t tftp_receive_data(struct netconn *nc, size_t write_offs, size_t limit_offs, size_t *received_len);
+static err_t tftp_receive_data(struct netconn *nc, size_t write_offs, size_t limit_offs, size_t *received_len, ip_addr_t *peer_addr, int peer_port, tftp_receive_cb receive_cb);
 static err_t tftp_send_ack(struct netconn *nc, int block);
+static err_t tftp_send_rrq(struct netconn *nc, const char *filename);
 static void tftp_send_error(struct netconn *nc, int err_code, const char *err_msg);
 
 void ota_tftp_init_server(int listen_port)
@@ -52,6 +53,62 @@ void ota_tftp_init_server(int listen_port)
     xTaskCreate(tftp_task, (signed char *)"tftpOTATask", 512, (void *)listen_port, 2, NULL);
 }
 
+err_t ota_tftp_download(const char *server, int port, const char *filename,
+                        int timeout, int ota_slot, tftp_receive_cb receive_cb)
+{
+    rboot_config rboot_config = rboot_get_config();
+    /* Validate the OTA slot parameter */
+    if(rboot_config.current_rom == ota_slot || rboot_config.count <= ota_slot)
+    {
+        return ERR_VAL;
+    }
+    /* This is all we need to know from the rboot config - where we need
+       to write data to.
+    */
+    uint32_t flash_offset = rboot_config.roms[ota_slot];
+
+    struct netconn *nc = netconn_new (NETCONN_UDP);
+    err_t err;
+    if(!nc) {
+        return ERR_IF;
+    }
+
+    netconn_set_recvtimeout(nc, timeout);
+
+    /* try to bind our client port as our local port,
+       or keep trying the next 10 ports after it */
+    int local_port = port-1;
+    do {
+        err = netconn_bind(nc, IP_ADDR_ANY, ++local_port);
+    } while(err == ERR_USE && local_port < port + 10);
+    if(err) {
+        netconn_delete(nc);
+        return err;
+    }
+
+    ip_addr_t addr;
+    err = netconn_gethostbyname(server, &addr);
+    if(err) {
+        netconn_delete(nc);
+        return err;
+    }
+
+    netconn_connect(nc, &addr, port);
+
+    err = tftp_send_rrq(nc, filename);
+    if(err) {
+        netconn_delete(nc);
+        return err;
+    }
+
+    size_t received_len;
+    err = tftp_receive_data(nc, flash_offset, flash_offset+MAX_IMAGE_SIZE,
+                            &received_len, &addr, port, receive_cb);
+    netconn_delete(nc);
+    return err;
+}
+
+
 static void tftp_task(void *listen_port)
 {
     struct netconn *nc = netconn_new (NETCONN_UDP);
@@ -100,7 +157,7 @@ static void tftp_task(void *listen_port)
 
         /* check mode */
         char *mode = tftp_get_field(1, netbuf);
-        if(!mode || strcmp("octet", mode)) {
+        if(!mode || strcmp(TFTP_OCTET_MODE, mode)) {
             tftp_send_error(nc, TFTP_ERR_ILLEGAL, "Mode must be octet/binary");
             free(mode);
             netbuf_delete(netbuf);
@@ -133,7 +190,8 @@ static void tftp_task(void *listen_port)
 
         /* Finished WRQ phase, start TFTP data transfer */
         size_t received_len;
-        int recv_err = tftp_receive_data(nc, conf.roms[slot], conf.roms[slot]+MAX_IMAGE_SIZE, &received_len);
+        netconn_set_recvtimeout(nc, 10000);
+        int recv_err = tftp_receive_data(nc, conf.roms[slot], conf.roms[slot]+MAX_IMAGE_SIZE, &received_len, NULL, 0, NULL);
 
         netconn_disconnect(nc);
         printf("OTA TFTP receive data result %d bytes %d\r\n", recv_err, received_len);
@@ -182,20 +240,48 @@ static char *tftp_get_field(int field, struct netbuf *netbuf)
     return result;
 }
 
-static err_t tftp_receive_data(struct netconn *nc, size_t write_offs, size_t limit_offs, size_t *received_len)
+#define TFTP_TIMEOUT_RETRANSMITS 10
+
+static err_t tftp_receive_data(struct netconn *nc, size_t write_offs, size_t limit_offs, size_t *received_len, ip_addr_t *peer_addr, int peer_port, tftp_receive_cb receive_cb)
 {
     *received_len = 0;
     const int DATA_PACKET_SZ = 512 + 4; /*( packet size plus header */
     uint32_t start_offs = write_offs;
     int block = 1;
 
-    struct netbuf *netbuf;
+    struct netbuf *netbuf = 0;
+    int retries = TFTP_TIMEOUT_RETRANSMITS;
 
     while(1)
     {
-        netconn_set_recvtimeout(nc, 10000);
+        if(peer_addr) {
+            netconn_disconnect(nc);
+        }
+
         err_t err = netconn_recv(nc, &netbuf);
+
+        if(peer_addr) {
+            if(netbuf) {
+                /* For TFTP server, the UDP connection is already established. But for client,
+                   we don't know what port the server is using until we see the first data
+                   packet - so we connect here.
+                */
+                netconn_connect(nc, netbuf_fromaddr(netbuf), netbuf_fromport(netbuf));
+                peer_addr = 0;
+            } else {
+                /* Otherwise, temporarily re-connect so we can send errors */
+                netconn_connect(nc, peer_addr, peer_port);
+            }
+        }
+
         if(err == ERR_TIMEOUT) {
+            if(retries-- > 0 && block > 1) {
+                /* Retransmit the last ACK, wait for repeat data block.
+
+                 This doesn't work for the first block, have to time out and start again. */
+                tftp_send_ack(nc, block-1);
+                continue;
+            }
             tftp_send_error(nc, TFTP_ERR_ILLEGAL, "Timeout");
             return ERR_TIMEOUT;
         }
@@ -225,6 +311,9 @@ static err_t tftp_receive_data(struct netconn *nc, size_t write_offs, size_t lim
             }
         }
 
+        /* Reset retry count if we got valid data */
+        retries = TFTP_TIMEOUT_RETRANSMITS;
+
         if(write_offs % SECTOR_SIZE == 0) {
             sdk_spi_flash_erase_sector(write_offs / SECTOR_SIZE);
         }
@@ -281,7 +370,9 @@ static err_t tftp_receive_data(struct netconn *nc, size_t write_offs, size_t lim
                it so the client gets an indication if things were successful.
             */
             const char *err = "Unknown validation error";
-            if(!rboot_verify_image(start_offs, *received_len, &err)) {
+            uint32_t image_length;
+            if(!rboot_verify_image(start_offs, &image_length, &err)
+               || image_length != *received_len) {
                 tftp_send_error(nc, TFTP_ERR_ILLEGAL, err);
                 return ERR_VAL;
             }
@@ -293,6 +384,11 @@ static err_t tftp_receive_data(struct netconn *nc, size_t write_offs, size_t lim
             return ack_err;
         }
 
+        // Make sure ack was successful before calling callback.
+        if(receive_cb) {
+            receive_cb(*received_len);
+        }
+
         if(len < DATA_PACKET_SZ) {
             return ERR_OK;
         }
@@ -325,3 +421,17 @@ static void tftp_send_error(struct netconn *nc, int err_code, const char *err_ms
     netconn_send(nc, err);
     netbuf_delete(err);
 }
+
+static err_t tftp_send_rrq(struct netconn *nc, const char *filename)
+{
+    struct netbuf *rrqbuf = netbuf_new();
+    uint16_t *rrqdata = (uint16_t *)netbuf_alloc(rrqbuf, 4 + strlen(filename) + strlen(TFTP_OCTET_MODE));
+    rrqdata[0] = htons(TFTP_OP_RRQ);
+    char *rrq_filename = (char *)&rrqdata[1];
+    strcpy(rrq_filename, filename);
+    strcpy(rrq_filename + strlen(filename) + 1, TFTP_OCTET_MODE);
+
+    err_t err = netconn_send(nc, rrqbuf);
+    netbuf_delete(rrqbuf);
+    return err;
+}

extras/rboot-ota/ota-tftp.h

@@ -1,5 +1,10 @@
 #ifndef _OTA_TFTP_H
 #define _OTA_TFTP_H
+
+#include "lwip/err.h"
+
+typedef void (*tftp_receive_cb)(size_t bytes_received);
+
 /* TFTP Server OTA Support
  *
  * To use, call ota_tftp_init_server() which will start the TFTP server task
@@ -30,6 +35,21 @@
  */
 void ota_tftp_init_server(int listen_port);
 
+/* Attempt to make a TFTP client connection and download the specified filename.
+
+   'timeout' is in milliseconds, and is timeout for any UDP exchange
+   _not_ the entire download.
+
+   Returns 0 on success, LWIP err.h values for errors.
+
+   Does not change the current firmware slot, or reboot.
+
+   receive_cb: called repeatedly after each successful packet that
+   has been written to flash and ACKed.  Can pass NULL to omit.
+ */
+err_t ota_tftp_download(const char *server, int port, const char *filename,
+                        int timeout, int ota_slot, tftp_receive_cb receive_cb);
+
 #define TFTP_PORT 69
 
 #endif

extras/rboot-ota/rboot-api.c

@@ -4,9 +4,11 @@
 // richardaburton@gmail.com
 // See license.txt for license terms.
 // OTA code based on SDK sample from Espressif.
+//
+// esp-open-rtos additions Copyright 2016 Angus Gratton
 //////////////////////////////////////////////////
 
-#include <rboot.h>
+#include <rboot-api.h>
 #include <string.h>
 //#include <c_types.h>
 //#include <spi_flash.h>
@@ -209,6 +211,164 @@ bool ICACHE_FLASH_ATTR rboot_get_last_boot_mode(uint8 *mode) {
 }
 #endif
 
+/* NOTE: Functions below here were added for esp-open-rtos only */
+
+uint32_t rboot_get_slot_offset(uint8_t slot) {
+    rboot_config conf;
+    conf = rboot_get_config();
+    if (slot >= conf.count) return (uint32_t)-1;
+    return conf.roms[slot];
+}
+
+/* Structures for parsing the rboot OTA image format */
+typedef struct __attribute__((packed)) {
+    uint8_t magic;
+    uint8_t section_count;
+    uint8_t val[2]; /* flash size & speed when placed @ offset 0, I thik ignored otherwise */
+    uint32_t entrypoint;
+} image_header_t;
+
+typedef struct __attribute__((packed)) {
+    uint32_t load_addr;
+    uint32_t length;
+} section_header_t;
+
+#define ROM_MAGIC_OLD 0xe9
+#define ROM_MAGIC_NEW 0xea
+
+bool rboot_verify_image(uint32_t initial_offset, uint32_t *image_length, const char **error_message)
+{
+    uint32_t offset = initial_offset;
+    char *error = NULL;
+    RBOOT_DEBUG("rboot_verify_image: verifying image at 0x%08x\n", initial_offset);
+    if(offset % 4) {
+        error = "Unaligned flash offset";
+        goto fail;
+    }
+
+    /* sanity limit on how far we can read */
+    uint32_t end_limit = offset + 0x100000;
+    image_header_t image_header __attribute__((aligned(4)));
+    if(sdk_spi_flash_read(offset, &image_header, sizeof(image_header_t))) {
+        error = "Flash fail";
+        goto fail;
+    }
+
+    offset += sizeof(image_header_t);
+
+    if(image_header.magic != ROM_MAGIC_OLD && image_header.magic != ROM_MAGIC_NEW) {
+        error = "Missing initial magic";
+        goto fail;
+    }
+
+    bool is_new_header = (image_header.magic == ROM_MAGIC_NEW); /* a v1.2/rboot header, so expect a v1.1 header after the initial section */
+
+    int remaining_sections = image_header.section_count;
+
+    uint8_t checksum = CHKSUM_INIT;
+
+    while(remaining_sections > 0 && offset < end_limit)
+    {
+        /* read section header */
+        section_header_t header __attribute__((aligned(4)));
+        if(sdk_spi_flash_read(offset, &header, sizeof(section_header_t))) {
+            error = "Flash fail";
+            goto fail;
+        }
+
+        RBOOT_DEBUG("Found section @ 0x%08x (abs 0x%08x) length %d load 0x%08x\n", offset-initial_offset, offset, header.length, header.load_addr);
+        offset += sizeof(section_header_t);
+
+        if(header.length+offset > end_limit) {
+            break; /* sanity check: will reading section take us off end of expected flashregion? */
+        }
+
+        if(header.length % 4) {
+            error = "Header length not modulo 4";
+            goto fail;
+        }
+
+        if(!is_new_header) {
+            /* Add individual data of the section to the checksum. */
+            char chunk[16] __attribute__((aligned(4)));
+            for(int i = 0; i < header.length; i++) {
+                if(i % sizeof(chunk) == 0)
+                    sdk_spi_flash_read(offset+i, (uint32_t *)chunk, sizeof(chunk));
+                checksum ^= chunk[i % sizeof(chunk)];
+            }
+        }
+
+        offset += header.length;
+        /* pad section to 4 byte align */
+        offset = (offset+3) & ~3;
+
+        remaining_sections--;
+
+        if(is_new_header) {
+            /* pad to a 16 byte offset */
+            offset = (offset+15) & ~15;
+
+            /* expect a v1.1 header here at start of "real" sections */
+            sdk_spi_flash_read(offset, (uint32_t *)&image_header, sizeof(image_header_t));
+            offset += sizeof(image_header_t);
+            if(image_header.magic != ROM_MAGIC_OLD) {
+                error = "Bad second magic";
+                goto fail;
+            }
+            remaining_sections = image_header.section_count;
+            is_new_header = false;
+        }
+    }
+
+    if(remaining_sections > 0) {
+        error = "Image truncated";
+        goto fail;
+    }
+
+    /* add a byte for the image checksum (actually comes after the padding) */
+    offset++;
+    /* pad the image length to a 16 byte boundary */
+    offset = (offset+15) & ~15;
+
+    uint32_t read_checksum;
+    sdk_spi_flash_read(offset-1, &read_checksum, 1);
+    if((uint8_t)read_checksum != checksum) {
+        error = "Invalid checksum";
+        goto fail;
+    }
+
+    RBOOT_DEBUG("rboot_verify_image: verified expected 0x%08x bytes.\n", offset - initial_offset);
+
+    if(image_length)
+        *image_length = offset - initial_offset;
+
+    return true;
+
+ fail:
+    if(error_message)
+        *error_message = error;
+    if(error) {
+        printf("%s: %s\n", __func__, error);
+    }
+    if(image_length)
+        *image_length = offset - initial_offset;
+    return false;
+}
+
+bool rboot_digest_image(uint32_t offset, uint32_t image_length, rboot_digest_update_fn update_fn, void *update_ctx)
+{
+    uint8_t buf[32] __attribute__((aligned(4)));
+    for(int i = 0; i < image_length; i += sizeof(buf)) {
+        if(sdk_spi_flash_read(offset+i, buf, sizeof(buf)))
+            return false;
+        uint32_t digest_len = sizeof(buf);
+        if(i + digest_len  > image_length)
+            digest_len = image_length - i;
+        update_fn(update_ctx, buf, digest_len);
+    }
+    return true;
+}
+
 #ifdef __cplusplus
 }
 #endif

extras/rboot-ota/rboot-api.h

@@ -12,6 +12,7 @@
  *  @{
 */
 
+#include <rboot-integration.h>
 #include <rboot.h>
 
 #ifdef __cplusplus
@@ -128,6 +129,49 @@ bool ICACHE_FLASH_ATTR rboot_get_last_boot_rom(uint8 *rom);
 bool ICACHE_FLASH_ATTR rboot_get_last_boot_mode(uint8 *mode);
 #endif
 
+/* ADDITIONS TO RBOOT-API FOR ESP-OPEN-RTOS FOLLOW */
+
+/* Returns offset of given rboot slot, or (uint32_t)-1 if slot is invalid.
+ */
+uint32_t rboot_get_slot_offset(uint8_t slot);
+
+/** @description Verify basic image parameters - headers, CRC8 checksum.
+
+    @param Offset of image to verify. Can use rboot_get_slot_offset() to find.
+    @param Optional pointer will return the total valid length of the image.
+    @param Optional pointer to a static human-readable error message if fails.
+
+    @return True for valid, False for invalid.
+**/
+bool rboot_verify_image(uint32_t offset, uint32_t *image_length, const char **error_message);
+
+
+/* @description Digest callback prototype, designed to be compatible with
+   mbedtls digest functions (SHA, MD5, etc.)
+
+   See the ota_basic example to see an example of calculating the
+   SHA256 digest of an OTA image.
+*/
+typedef void (*rboot_digest_update_fn)(void * ctx, void *data, size_t data_len);
+
+/** @description Calculate a digest over the image at the offset specified
+
+    @note This function is actually a generic function that hashes SPI
+   flash contents, doesn't know anything about rboot image format. Use
+   rboot_verify_image to ensure a well-formed OTA image.
+
+   @param offset - Starting offset of image to hash (should be 4 byte aligned.)
+
+   @param image_length - Length of image to hash (should be 4 byte aligned.)
+
+   @param update_fn - Function to update digest (see rboot_digest_update_fn for details)
+
+   @param update_ctx - Context argument for digest update function.
+
+   @return True if digest completes successfully, false if digest function failed part way through
+**/
+bool rboot_digest_image(uint32_t offset, uint32_t image_length, rboot_digest_update_fn update_fn, void *update_ctx);
+
 #ifdef __cplusplus
 }
 #endif

extras/rboot-ota/rboot-config.h

@@ -1,14 +0,0 @@
-#ifndef _RBOOT_CONFIG_H
-/* rboot configuration parameters.
-
-   Must match the config in the compiler bootloader rboot.h. Values below are the rboot.h defaults.
-
-   Override rboot parameters by editing this file, or (much better
-   alternative) copy rboot-config.h to your program directory or
-   program/include/ directory, then edit it to override these values.
-*/
-
-#define RBOOT_MAX_ROMS 4
-//#define RBOOT_CONFIG_CHECKSUM
-
-#endif

extras/rboot-ota/rboot-integration.c

@@ -1,132 +0,0 @@
-#include <stdint.h>
-#include <stdbool.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-
-#include <espressif/spi_flash.h>
-#include <espressif/esp_system.h>
-
-#include <FreeRTOS.h>
-#include <task.h>
-
-#include <rboot.h>
-
-#define ROM_MAGIC_OLD 0xe9
-#define ROM_MAGIC_NEW 0xea
-
-typedef struct __attribute__((packed)) {
-    uint8_t magic;
-    uint8_t section_count;
-    uint8_t val[2]; /* flash size & speed when placed @ offset 0, I think ignored otherwise */
-    uint32_t entrypoint;
-} image_header_t;
-
-typedef struct __attribute__((packed)) {
-    uint32_t load_addr;
-    uint32_t length;
-} section_header_t;
-
-
-// Check that a valid-looking rboot image is found at this offset on the flash, and
-// takes up 'expected_length' bytes.
-bool rboot_verify_image(uint32_t offset, uint32_t expected_length, const char **error_message)
-{
-    char *error = NULL;
-    if(offset % 4) {
-        error = "Unaligned flash offset";
-        goto fail;
-    }
-
-    uint32_t end_offset = offset + expected_length;
-    image_header_t image_header;
-    sdk_spi_flash_read(offset, (uint32_t *)&image_header, sizeof(image_header_t));
-    offset += sizeof(image_header_t);
-
-    if(image_header.magic != ROM_MAGIC_OLD && image_header.magic != ROM_MAGIC_NEW) {
-        error = "Missing initial magic";
-        goto fail;
-    }
-
-    bool is_new_header = (image_header.magic == ROM_MAGIC_NEW); /* a v1.2/rboot header, so expect a v1.1 header after the initial section */
-
-    int remaining_sections = image_header.section_count;
-
-    uint8_t checksum = CHKSUM_INIT;
-
-    while(remaining_sections > 0 && offset < end_offset)
-    {
-        /* read section header */
-        section_header_t header;
-        sdk_spi_flash_read(offset, (uint32_t *)&header, sizeof(section_header_t));
-        RBOOT_DEBUG("Found section @ 0x%08lx length 0x%08lx load 0x%08lx padded 0x%08lx\r\n", offset, header.length, header.load_addr, header.length);
-        offset += sizeof(section_header_t);
-
-
-        if(header.length+offset > end_offset) {
-            break; /* sanity check: will reading section take us off end of expected flashregion? */
-        }
-
-        if(!is_new_header) {
-            /* Add individual data of the section to the checksum. */
-            char chunk[16];
-            for(int i = 0; i < header.length; i++) {
-                if(i % sizeof(chunk) == 0)
-                    sdk_spi_flash_read(offset+i, (uint32_t *)chunk, sizeof(chunk));
-                checksum ^= chunk[i % sizeof(chunk)];
-            }
-        }
-
-        offset += header.length;
-        /* pad section to 4 byte align */
-        offset = (offset+3) & ~3;
-
-        remaining_sections--;
-
-        if(is_new_header) {
-            /* pad to a 16 byte offset */
-            offset = (offset+15) & ~15;
-
-            /* expect a v1.1 header here at start of "real" sections */
-            sdk_spi_flash_read(offset, (uint32_t *)&image_header, sizeof(image_header_t));
-            offset += sizeof(image_header_t);
-            if(image_header.magic != ROM_MAGIC_OLD) {
-                error = "Bad second magic";
-                goto fail;
-            }
-            remaining_sections = image_header.section_count;
-            is_new_header = false;
-        }
-    }
-
-    if(remaining_sections > 0) {
-        error = "Image truncated";
-        goto fail;
-    }
-
-    /* add a byte for the image checksum (actually comes after the padding) */
-    offset++;
-    /* pad the image length to a 16 byte boundary */
-    offset = (offset+15) & ~15;
-
-    uint8_t read_checksum;
-    sdk_spi_flash_read(offset-1, (uint32_t *)&read_checksum, 1); /* not sure if this will work */
-    if(read_checksum != checksum) {
-        error = "Invalid checksum";
-        goto fail;
-    }
-
-    if(offset != end_offset) {
-        error = "Wrong length";
-        goto fail;
-    }
-
-    RBOOT_DEBUG("rboot_verify_image: verified expected 0x%08lx bytes.\r\n", expected_length);
-    return true;
-
- fail:
-    if(error_message)
-        *error_message = error;
-    printf("%s: %s\r\n", __func__, error);
-    return false;
-}

extras/rboot-ota/rboot-integration.h

@@ -9,6 +9,10 @@
 #include <FreeRTOS.h>
 #include <task.h>
 
+/***************************************************
+ * Platform configuration definitions              *
+ ***************************************************/
+
 #define uint8 uint8_t
 #define uint16 uint16_t
 #define uint32 uint32_t
@@ -28,7 +32,11 @@
 #define RBOOT_DEBUG(f_, ...)
 #endif
 
-// Check that a valid-looking rboot image is found at this offset on the flash, and
+/* Enable checksumming when writing out the config,
-// takes up 'expected_length' bytes.
+   so if the bootloader is built with checksumming then
-bool rboot_verify_image(uint32_t offset, uint32_t expected_length, const char **error_message);
+   it will still work.
+*/
+#define BOOT_CONFIG_CHKSUM
+
+
 #endif // __RBOOT_INTEGRATION_H__

extras/rboot-ota/rboot.h

@@ -1,111 +0,0 @@
-#ifndef __RBOOT_H__
-#define __RBOOT_H__
-
-//////////////////////////////////////////////////
-// rBoot open source boot loader for ESP8266.
-// Copyright 2015 Richard A Burton
-// richardaburton@gmail.com
-// See license.txt for license terms.
-//////////////////////////////////////////////////
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define RBOOT_INTEGRATION
-
-// uncomment to use only c code
-// if you aren't using gcc you may need to do this
-//#define BOOT_NO_ASM
-
-// uncomment to have a checksum on the boot config
-//#define BOOT_CONFIG_CHKSUM
-
-// uncomment to enable big flash support (>1MB)
-#define BOOT_BIG_FLASH
-
-// uncomment to enable 2 way communication between
-// rBoot and the user app via the esp rtc data area
-#define BOOT_RTC_ENABLED
-
-// uncomment to enable GPIO booting
-//#define BOOT_GPIO_ENABLED
-
-// uncomment to include .irom0.text section in the checksum
-// roms must be built with esptool2 using -iromchksum option
-//#define BOOT_IROM_CHKSUM
-
-// uncomment to add a boot delay, allows you time to connect
-// a terminal before rBoot starts to run and output messages
-// value is in microseconds
-//#define BOOT_DELAY_MICROS 2000000
-
-// increase if required
-#define MAX_ROMS 4
-
-#define CHKSUM_INIT 0xef
-
-#define SECTOR_SIZE 0x1000
-#define BOOT_CONFIG_SECTOR 1
-
-#define BOOT_CONFIG_MAGIC 0xe1
-#define BOOT_CONFIG_VERSION 0x01
-
-#define MODE_STANDARD 0x00
-#define MODE_GPIO_ROM 0x01
-#define MODE_TEMP_ROM 0x02
-
-#define RBOOT_RTC_MAGIC 0x2334ae68
-#define RBOOT_RTC_READ 1
-#define RBOOT_RTC_WRITE 0
-#define RBOOT_RTC_ADDR 64
-
-#ifdef RBOOT_INTEGRATION
-#include <rboot-integration.h>
-#endif
-
-/** @brief  Structure containing rBoot configuration
- *  @note   ROM addresses must be multiples of 0x1000 (flash sector aligned).
- *          Without BOOT_BIG_FLASH only the first 8Mbit (1MB) of the chip will
- *          be memory mapped so ROM slots containing .irom0.text sections must
- *          remain below 0x100000. Slots beyond this will only be accessible via
- *          spi read calls, so use these for stored resources, not code. With
- *          BOOT_BIG_FLASH the flash will be mapped in chunks of 8MBit (1MB), so
- *          ROMs can be anywhere, but must not straddle two 8MBit (1MB) blocks.
- *  @ingroup rboot
-*/
-typedef struct {
-	uint8 magic;           ///< Our magic, identifies rBoot configuration - should be BOOT_CONFIG_MAGIC
-	uint8 version;         ///< Version of configuration structure - should be BOOT_CONFIG_VERSION
-	uint8 mode;            ///< Boot loader mode (MODE_STANDARD | MODE_GPIO_ROM)
-	uint8 current_rom;     ///< Currently selected ROM (will be used for next standard boot)
-	uint8 gpio_rom;        ///< ROM to use for GPIO boot (hardware switch) with mode set to MODE_GPIO_ROM
-	uint8 count;           ///< Quantity of ROMs available to boot
-	uint8 unused[2];       ///< Padding (not used)
-	uint32 roms[MAX_ROMS]; ///< Flash addresses of each ROM
-#ifdef BOOT_CONFIG_CHKSUM
-	uint8 chksum;          ///< Checksum of this configuration structure (if BOOT_CONFIG_CHKSUM defined)
-#endif
-} rboot_config;
-
-#ifdef BOOT_RTC_ENABLED
-/** @brief  Structure containing rBoot status/control data
- *  @note   This structure is used to, optionally, communicate between rBoot and
- *          the user app. It is stored in the ESP RTC data area.
- *  @ingroup rboot
-*/
-typedef struct {
-	uint32 magic;           ///< Magic, identifies rBoot RTC data - should be RBOOT_RTC_MAGIC
-	uint8 next_mode;        ///< The next boot mode, defaults to MODE_STANDARD - can be set to MODE_TEMP_ROM
-	uint8 last_mode;        ///< The last (this) boot mode - can be MODE_STANDARD, MODE_GPIO_ROM or MODE_TEMP_ROM
-	uint8 last_rom;         ///< The last (this) boot rom number
-	uint8 temp_rom;         ///< The next boot rom number when next_mode set to MODE_TEMP_ROM
-	uint8 chksum;           ///< Checksum of this structure this will be updated for you passed to the API
-} rboot_rtc_data;
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

extras/sntp/component.mk

@@ -0,0 +1,8 @@
+# Component makefile for extras/sntp
+
+INC_DIRS += $(sntp_ROOT)
+
+# args for passing into compile rule generation
+sntp_SRC_DIR =  $(sntp_ROOT)
+
+$(eval $(call component_compile_rules,sntp))

extras/sntp/sntp.c

@@ -0,0 +1,748 @@
+/**
+ * @file
+ * SNTP client module
+ *
+ */
+
+/*
+ * Redistribution and use in source and binary forms, with or without modification, 
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ * 
+ * Author: Simon Goldschmidt (lwIP raw API part)
+ *
+ * Modified by Jesus Alonso (doragasu) to allow setting servers dynamically.
+ */
+
+#include "lwip/opt.h"
+
+#include "sntp.h"
+
+#include "lwip/timers.h"
+#include "lwip/udp.h"
+#include "lwip/dns.h"
+#include "lwip/ip_addr.h"
+#include "lwip/pbuf.h"
+
+#include <string.h>
+#include <time.h>
+
+#if LWIP_UDP
+
+/** This is simple "SNTP" client for socket or raw API.
+ * It is a minimal implementation of SNTPv4 as specified in RFC 4330.
+ * 
+ * For a list of some public NTP servers, see this link :
+ * http://support.ntp.org/bin/view/Servers/NTPPoolServers
+ *
+ * @todo:
+ * - set/change servers at runtime
+ * - complete SNTP_CHECK_RESPONSE checks 3 and 4
+ * - support broadcast/multicast mode?
+ */
+
+/** Decide whether to build SNTP for socket or raw API
+ * The socket API SNTP client is a very minimal implementation that does not
+ * fully confor to the SNTPv4 RFC, especially regarding server load and error
+ * procesing. */
+#ifndef SNTP_SOCKET
+#define SNTP_SOCKET                 0
+#endif
+
+#if SNTP_SOCKET
+#include "lwip/sockets.h"
+#endif
+
+/**
+ * SNTP_DEBUG: Enable debugging for SNTP.
+ */
+#ifndef SNTP_DEBUG
+#define SNTP_DEBUG                  LWIP_DBG_OFF
+#endif
+
+/** SNTP server port */
+#ifndef SNTP_PORT
+#define SNTP_PORT                   123
+#endif
+
+/** Set this to 1 to allow SNTP_SERVER_ADDRESS to be a DNS name */
+#ifndef SNTP_SERVER_DNS
+#define SNTP_SERVER_DNS             0
+#endif
+
+/** Set to the number of servers supported (at least 1) */
+#ifndef SNTP_NUM_SERVERS_SUPPORTED
+#define SNTP_NUM_SERVERS_SUPPORTED	1
+#endif
+
+/** SNTP server address:
+ * - as IPv4 address in "u32_t" format
+ * - as a DNS name if SNTP_SERVER_DNS is set to 1
+ * May contain multiple server names (e.g. "pool.ntp.org","second.time.server")
+ */
+#ifndef SNTP_SERVER_ADDRESS
+#if SNTP_SERVER_DNS
+#define SNTP_SERVER_ADDRESS         "pool.ntp.org"
+#else
+#define SNTP_SERVER_ADDRESS         "213.161.194.93" /* pool.ntp.org */
+#endif
+#endif
+
+/** Sanity check:
+ * Define this to
+ * - 0 to turn off sanity checks (default; smaller code)
+ * - >= 1 to check address and port of the response packet to ensure the
+ *        response comes from the server we sent the request to.
+ * - >= 2 to check returned Originate Timestamp against Transmit Timestamp
+ *        sent to the server (to ensure response to older request).
+ * - >= 3 @todo: discard reply if any of the LI, Stratum, or Transmit Timestamp
+ *        fields is 0 or the Mode field is not 4 (unicast) or 5 (broadcast).
+ * - >= 4 @todo: to check that the Root Delay and Root Dispersion fields are each
+ *        greater than or equal to 0 and less than infinity, where infinity is
+ *        currently a cozy number like one second. This check avoids using a
+ *        server whose synchronization source has expired for a very long time.
+ */
+#ifndef SNTP_CHECK_RESPONSE
+#define SNTP_CHECK_RESPONSE         0
+#endif
+
+/** According to the RFC, this shall be a random delay
+ * between 1 and 5 minutes (in milliseconds) to prevent load peaks.
+ * This can be defined to a random generation function,
+ * which must return the delay in milliseconds as u32_t.
+ * Turned off by default.
+ */
+#ifndef SNTP_STARTUP_DELAY
+#define SNTP_STARTUP_DELAY          0
+#endif
+
+/** SNTP receive timeout - in milliseconds
+ * Also used as retry timeout - this shouldn't be too low.
+ * Default is 3 seconds.
+ */
+#ifndef SNTP_RECV_TIMEOUT
+#define SNTP_RECV_TIMEOUT           3000
+#endif
+
+/** SNTP update delay - in milliseconds
+ * Default is 1 hour.
+ */
+#ifndef SNTP_UPDATE_DELAY
+#define SNTP_UPDATE_DELAY           3600000
+#endif
+#if (SNTP_UPDATE_DELAY < 15000) && !SNTP_SUPPRESS_DELAY_CHECK
+#error "SNTPv4 RFC 4330 enforces a minimum update time of 15 seconds!"
+#endif
+
+/** SNTP macro to change system time and/or the update the RTC clock */
+#ifndef SNTP_SET_SYSTEM_TIME
+#define SNTP_SET_SYSTEM_TIME(sec) ((void)sec)
+#endif
+
+/** SNTP macro to change system time including microseconds */
+#ifdef SNTP_SET_SYSTEM_TIME_US
+#define SNTP_CALC_TIME_US           1
+#define SNTP_RECEIVE_TIME_SIZE      2
+#else
+#define SNTP_SET_SYSTEM_TIME_US(sec, us)
+#define SNTP_CALC_TIME_US           0
+#define SNTP_RECEIVE_TIME_SIZE      1
+#endif
+
+/** SNTP macro to get system time, used with SNTP_CHECK_RESPONSE >= 2
+ * to send in request and compare in response.
+ */
+#ifndef SNTP_GET_SYSTEM_TIME
+#define SNTP_GET_SYSTEM_TIME(sec, us)     do { (sec) = 0; (us) = 0; } while(0)
+#endif
+
+/** Default retry timeout (in milliseconds) if the response
+ * received is invalid.
+ * This is doubled with each retry until SNTP_RETRY_TIMEOUT_MAX is reached.
+ */
+#ifndef SNTP_RETRY_TIMEOUT
+#define SNTP_RETRY_TIMEOUT          SNTP_RECV_TIMEOUT
+#endif
+
+/** Maximum retry timeout (in milliseconds). */
+#ifndef SNTP_RETRY_TIMEOUT_MAX
+#define SNTP_RETRY_TIMEOUT_MAX      (SNTP_RETRY_TIMEOUT * 10)
+#endif
+
+/** Increase retry timeout with every retry sent
+ * Default is on to conform to RFC.
+ */
+#ifndef SNTP_RETRY_TIMEOUT_EXP
+#define SNTP_RETRY_TIMEOUT_EXP      1
+#endif
+
+/* the various debug levels for this file */
+#define SNTP_DEBUG_TRACE        (SNTP_DEBUG | LWIP_DBG_TRACE)
+#define SNTP_DEBUG_STATE        (SNTP_DEBUG | LWIP_DBG_STATE)
+#define SNTP_DEBUG_WARN         (SNTP_DEBUG | LWIP_DBG_LEVEL_WARNING)
+#define SNTP_DEBUG_WARN_STATE   (SNTP_DEBUG | LWIP_DBG_LEVEL_WARNING | LWIP_DBG_STATE)
+#define SNTP_DEBUG_SERIOUS      (SNTP_DEBUG | LWIP_DBG_LEVEL_SERIOUS)
+
+#define SNTP_ERR_KOD                1
+
+/* SNTP protocol defines */
+#define SNTP_MSG_LEN                48
+
+#define SNTP_OFFSET_LI_VN_MODE      0
+#define SNTP_LI_MASK                0xC0
+#define SNTP_LI_NO_WARNING          0x00
+#define SNTP_LI_LAST_MINUTE_61_SEC  0x01
+#define SNTP_LI_LAST_MINUTE_59_SEC  0x02
+#define SNTP_LI_ALARM_CONDITION     0x03 /* (clock not synchronized) */
+
+#define SNTP_VERSION_MASK           0x38
+#define SNTP_VERSION                (4/* NTP Version 4*/<<3) 
+
+#define SNTP_MODE_MASK              0x07
+#define SNTP_MODE_CLIENT            0x03
+#define SNTP_MODE_SERVER            0x04
+#define SNTP_MODE_BROADCAST         0x05
+
+#define SNTP_OFFSET_STRATUM         1
+#define SNTP_STRATUM_KOD            0x00
+
+#define SNTP_OFFSET_ORIGINATE_TIME  24
+#define SNTP_OFFSET_RECEIVE_TIME    32
+#define SNTP_OFFSET_TRANSMIT_TIME   40
+
+/* number of seconds between 1900 and 1970 */
+#define DIFF_SEC_1900_1970         (2208988800UL)
+
+/**
+ * SNTP packet format (without optional fields)
+ * Timestamps are coded as 64 bits:
+ * - 32 bits seconds since Jan 01, 1970, 00:00
+ * - 32 bits seconds fraction (0-padded)
+ * For future use, if the MSB in the seconds part is set, seconds are based
+ * on Feb 07, 2036, 06:28:16.
+ */
+#ifdef PACK_STRUCT_USE_INCLUDES
+#  include "arch/bpstruct.h"
+#endif
+PACK_STRUCT_BEGIN
+struct sntp_msg {
+ PACK_STRUCT_FIELD(u8_t           li_vn_mode);
+ PACK_STRUCT_FIELD(u8_t           stratum);
+ PACK_STRUCT_FIELD(u8_t           poll);
+ PACK_STRUCT_FIELD(u8_t           precision);
+ PACK_STRUCT_FIELD(u32_t          root_delay);
+ PACK_STRUCT_FIELD(u32_t          root_dispersion);
+ PACK_STRUCT_FIELD(u32_t          reference_identifier);
+ PACK_STRUCT_FIELD(u32_t          reference_timestamp[2]);
+ PACK_STRUCT_FIELD(u32_t          originate_timestamp[2]);
+ PACK_STRUCT_FIELD(u32_t          receive_timestamp[2]);
+ PACK_STRUCT_FIELD(u32_t          transmit_timestamp[2]);
+} PACK_STRUCT_STRUCT;
+PACK_STRUCT_END
+#ifdef PACK_STRUCT_USE_INCLUDES
+#  include "arch/epstruct.h"
+#endif
+
+/* function prototypes */
+static void sntp_request(void *arg);
+
+/** The UDP pcb used by the SNTP client */
+static struct udp_pcb* sntp_pcb;
+/** Addresses of servers */
+static char* sntp_server_addresses[SNTP_NUM_SERVERS_SUPPORTED];
+/** The currently used server (initialized to 0) */
+static u8_t sntp_num_servers;
+#if (SNTP_NUM_SERVERS_SUPPORTED > 1)
+static u8_t sntp_current_server;
+#else
+#define sntp_current_server 0
+#endif /* SNTP_NUM_SERVERS_SUPPORTED */
+
+static u32_t sntp_update_delay = SNTP_UPDATE_DELAY;
+
+#if SNTP_RETRY_TIMEOUT_EXP
+#define SNTP_RESET_RETRY_TIMEOUT() sntp_retry_timeout = SNTP_RETRY_TIMEOUT
+/** Retry time, initialized with SNTP_RETRY_TIMEOUT and doubled with each retry. */
+static u32_t sntp_retry_timeout;
+#else /* SNTP_RETRY_TIMEOUT_EXP */
+#define SNTP_RESET_RETRY_TIMEOUT()
+#define sntp_retry_timeout SNTP_RETRY_TIMEOUT
+#endif /* SNTP_RETRY_TIMEOUT_EXP */
+
+#if SNTP_CHECK_RESPONSE >= 1
+/** Saves the last server address to compare with response */
+static ip_addr_t sntp_last_server_address;
+#endif /* SNTP_CHECK_RESPONSE >= 1 */
+
+#if SNTP_CHECK_RESPONSE >= 2
+/** Saves the last timestamp sent (which is sent back by the server)
+ * to compare against in response */
+static u32_t sntp_last_timestamp_sent[2];
+#endif /* SNTP_CHECK_RESPONSE >= 2 */
+
+/**
+ * SNTP processing of received timestamp
+ */
+static void
+sntp_process(u32_t *receive_timestamp)
+{
+  /* convert SNTP time (1900-based) to unix GMT time (1970-based)
+   * @todo: if MSB is 1, SNTP time is 2036-based!
+   */
+  time_t t = (ntohl(receive_timestamp[0]) - DIFF_SEC_1900_1970);
+
+#if SNTP_CALC_TIME_US
+  u32_t us = ntohl(receive_timestamp[1]) / 4295;
+  SNTP_SET_SYSTEM_TIME_US(t, us);
+  /* display local time from GMT time */
+  LWIP_DEBUGF(SNTP_DEBUG_TRACE, ("sntp_process: %s, %"U32_F" us", ctime(&t), us));
+
+#else /* SNTP_CALC_TIME_US */
+
+  /* change system time and/or the update the RTC clock */
+  SNTP_SET_SYSTEM_TIME(t);
+  /* display local time from GMT time */
+  LWIP_DEBUGF(SNTP_DEBUG_TRACE, ("sntp_process: %s", ctime(&t)));
+#endif /* SNTP_CALC_TIME_US */
+}
+
+/**
+ * Initialize request struct to be sent to server.
+ */
+static void
+sntp_initialize_request(struct sntp_msg *req)
+{
+  memset(req, 0, SNTP_MSG_LEN);
+  req->li_vn_mode = SNTP_LI_NO_WARNING | SNTP_VERSION | SNTP_MODE_CLIENT;
+
+#if SNTP_CHECK_RESPONSE >= 2
+  {
+    u32_t sntp_time_sec, sntp_time_us;
+    /* fill in transmit timestamp and save it in 'sntp_last_timestamp_sent' */
+    SNTP_GET_SYSTEM_TIME(sntp_time_sec, sntp_time_us);
+    sntp_last_timestamp_sent[0] = htonl(sntp_time_sec + DIFF_SEC_1900_1970);
+    req->transmit_timestamp[0] = sntp_last_timestamp_sent[0];
+    /* we send/save us instead of fraction to be faster... */
+    sntp_last_timestamp_sent[1] = htonl(sntp_time_us);
+    req->transmit_timestamp[1] = sntp_last_timestamp_sent[1];
+  }
+#endif /* SNTP_CHECK_RESPONSE >= 2 */
+}
+
+#if SNTP_SOCKET
+
+/**
+ * Send an SNTP request via sockets.
+ * This is a very minimal implementation that does not fully conform
+ * to the SNTPv4 RFC, especially regarding server load and error procesing.
+ */
+static void
+sntp_request(void *arg)
+{
+  int                sock;
+  struct sockaddr_in local;
+  struct sockaddr_in to;
+  int                tolen;
+  int                size;
+  int                timeout;
+  struct sntp_msg    sntpmsg;
+  ip_addr_t          sntp_server_address;
+
+  LWIP_UNUSED_ARG(arg);
+
+  /* if we got a valid SNTP server address... */
+  if (ipaddr_aton(SNTP_SERVER_ADDRESS, &sntp_server_address)) {
+    /* create new socket */
+    sock = lwip_socket(AF_INET, SOCK_DGRAM, 0);
+    if (sock >= 0) {
+      /* prepare local address */
+      memset(&local, 0, sizeof(local));
+      local.sin_family      = AF_INET;
+      local.sin_port        = PP_HTONS(INADDR_ANY);
+      local.sin_addr.s_addr = PP_HTONL(INADDR_ANY);
+
+      /* bind to local address */
+      if (lwip_bind(sock, (struct sockaddr *)&local, sizeof(local)) == 0) {
+        /* set recv timeout */
+        timeout = SNTP_RECV_TIMEOUT;
+        lwip_setsockopt(sock, SOL_SOCKET, SO_RCVTIMEO, (char *)&timeout, sizeof(timeout));
+
+        /* prepare SNTP request */
+        sntp_initialize_request(&sntpmsg);
+
+        /* prepare SNTP server address */
+        memset(&to, 0, sizeof(to));
+        to.sin_family      = AF_INET;
+        to.sin_port        = PP_HTONS(SNTP_PORT);
+        inet_addr_from_ipaddr(&to.sin_addr, &sntp_server_address);
+    
+        /* send SNTP request to server */
+        if (lwip_sendto(sock, &sntpmsg, SNTP_MSG_LEN, 0, (struct sockaddr *)&to, sizeof(to)) >= 0) {
+          /* receive SNTP server response */
+          tolen = sizeof(to);
+          size  = lwip_recvfrom(sock, &sntpmsg, SNTP_MSG_LEN, 0, (struct sockaddr *)&to, (socklen_t *)&tolen);
+          /* if the response size is good */
+          if (size == SNTP_MSG_LEN) {
+            /* if this is a SNTP response... */
+            if (((sntpmsg.li_vn_mode & SNTP_MODE_MASK) == SNTP_MODE_SERVER) ||
+                ((sntpmsg.li_vn_mode & SNTP_MODE_MASK) == SNTP_MODE_BROADCAST)) {
+              /* do time processing */
+              sntp_process(sntpmsg.receive_timestamp);
+            } else {
+              LWIP_DEBUGF( SNTP_DEBUG_WARN, ("sntp_request: not response frame code\n"));
+            }
+          }
+        } else {
+          LWIP_DEBUGF( SNTP_DEBUG_WARN, ("sntp_request: not sendto==%i\n", errno));
+        }
+      }
+      /* close the socket */
+      closesocket(sock);
+    }
+  }
+}
+
+/**
+ * SNTP thread
+ */
+static void
+sntp_thread(void *arg)
+{
+  LWIP_UNUSED_ARG(arg);
+  while(1) {
+    sntp_request(NULL);
+    sys_msleep(sntp_update_delay);
+  }
+}
+
+/**
+ * Initialize this module when using sockets
+ */
+void
+sntp_init(void)
+{
+  sys_thread_new("sntp_thread", sntp_thread, NULL, DEFAULT_THREAD_STACKSIZE, DEFAULT_THREAD_PRIO);
+}
+
+#else /* SNTP_SOCKET */
+
+/**
+ * Retry: send a new request (and increase retry timeout).
+ *
+ * @param arg is unused (only necessary to conform to sys_timeout)
+ */
+static void
+sntp_retry(void* arg)
+{
+  LWIP_UNUSED_ARG(arg);
+
+  LWIP_DEBUGF(SNTP_DEBUG_STATE, ("sntp_retry: Next request will be sent in %"U32_F" ms\n",
+    sntp_retry_timeout));
+
+  /* set up a timer to send a retry and increase the retry delay */
+  sys_timeout(sntp_retry_timeout, sntp_request, NULL);
+
+#if SNTP_RETRY_TIMEOUT_EXP
+  {
+    u32_t new_retry_timeout;
+    /* increase the timeout for next retry */
+    new_retry_timeout = sntp_retry_timeout << 1;
+    /* limit to maximum timeout and prevent overflow */
+    if ((new_retry_timeout <= SNTP_RETRY_TIMEOUT_MAX) &&
+        (new_retry_timeout > sntp_retry_timeout)) {
+      sntp_retry_timeout = new_retry_timeout;
+    }
+  }
+#endif /* SNTP_RETRY_TIMEOUT_EXP */
+}
+
+#if (SNTP_NUM_SERVERS_SUPPORTED > 1)
+/**
+ * If Kiss-of-Death is received (or another packet parsing error),
+ * try the next server or retry the current server and increase the retry
+ * timeout if only one server is available.
+ *
+ * @param arg is unused (only necessary to conform to sys_timeout)
+ */
+static void
+sntp_try_next_server(void* arg)
+{
+  LWIP_UNUSED_ARG(arg);
+
+  if (sntp_num_servers > 1) {
+    /* new server: reset retry timeout */
+    SNTP_RESET_RETRY_TIMEOUT();
+    sntp_current_server++;
+    if (sntp_current_server >= sntp_num_servers) {
+      sntp_current_server = 0;
+    }
+    LWIP_DEBUGF(SNTP_DEBUG_STATE, ("sntp_try_next_server: Sending request to server %"U16_F"\n",
+      (u16_t)sntp_current_server));
+    /* instantly send a request to the next server */
+    sntp_request(NULL);
+  } else {
+    sntp_retry(NULL);
+  }
+}
+#else /* SNTP_NUM_SERVERS_SUPPORTED > 1 */
+/* Always retry on error if only one server is supported */
+#define sntp_try_next_server    sntp_retry
+#endif /* SNTP_NUM_SERVERS_SUPPORTED > 1 */
+
+/** UDP recv callback for the sntp pcb */
+static void
+sntp_recv(void *arg, struct udp_pcb* pcb, struct pbuf *p, ip_addr_t *addr, u16_t port)
+{
+  u8_t mode;
+  u8_t stratum;
+  u32_t receive_timestamp[SNTP_RECEIVE_TIME_SIZE];
+  err_t err;
+
+  LWIP_UNUSED_ARG(arg);
+  LWIP_UNUSED_ARG(pcb);
+
+  /* packet received: stop retry timeout  */
+  sys_untimeout(sntp_try_next_server, NULL);
+  sys_untimeout(sntp_request, NULL);
+
+  err = ERR_ARG;
+#if SNTP_CHECK_RESPONSE >= 1
+  /* check server address and port */
+  if (ip_addr_cmp(addr, &sntp_last_server_address) &&
+    (port == SNTP_PORT))
+#else /* SNTP_CHECK_RESPONSE >= 1 */
+  LWIP_UNUSED_ARG(addr);
+  LWIP_UNUSED_ARG(port);
+#endif /* SNTP_CHECK_RESPONSE >= 1 */
+  {
+    /* process the response */
+    if (p->tot_len == SNTP_MSG_LEN) {
+      pbuf_copy_partial(p, &mode, 1, SNTP_OFFSET_LI_VN_MODE);
+      mode &= SNTP_MODE_MASK;
+      /* if this is a SNTP response... */
+      if ((mode == SNTP_MODE_SERVER) ||
+          (mode == SNTP_MODE_BROADCAST)) {
+        pbuf_copy_partial(p, &stratum, 1, SNTP_OFFSET_STRATUM);
+        if (stratum == SNTP_STRATUM_KOD) {
+          /* Kiss-of-death packet. Use another server or increase UPDATE_DELAY. */
+          err = SNTP_ERR_KOD;
+          LWIP_DEBUGF(SNTP_DEBUG_STATE, ("sntp_recv: Received Kiss-of-Death\n"));
+        } else {
+#if SNTP_CHECK_RESPONSE >= 2
+          /* check originate_timetamp against sntp_last_timestamp_sent */
+          u32_t originate_timestamp[2];
+          pbuf_copy_partial(p, &originate_timestamp, 8, SNTP_OFFSET_ORIGINATE_TIME);
+          if ((originate_timestamp[0] != sntp_last_timestamp_sent[0]) ||
+              (originate_timestamp[1] != sntp_last_timestamp_sent[1]))
+          {
+            LWIP_DEBUGF(SNTP_DEBUG_WARN, ("sntp_recv: Invalid originate timestamp in response\n"));
+          } else
+#endif /* SNTP_CHECK_RESPONSE >= 2 */
+          /* @todo: add code for SNTP_CHECK_RESPONSE >= 3 and >= 4 here */
+          {
+            /* correct answer */
+            err = ERR_OK;
+            pbuf_copy_partial(p, &receive_timestamp, SNTP_RECEIVE_TIME_SIZE * 4, SNTP_OFFSET_RECEIVE_TIME);
+          }
+        }
+      } else {
+        LWIP_DEBUGF(SNTP_DEBUG_WARN, ("sntp_recv: Invalid mode in response: %"U16_F"\n", (u16_t)mode));
+      }
+    } else {
+      LWIP_DEBUGF(SNTP_DEBUG_WARN, ("sntp_recv: Invalid packet length: %"U16_F"\n", p->tot_len));
+    }
+  }
+  pbuf_free(p);
+  if (err == ERR_OK) {
+    /* Correct response, reset retry timeout */
+    SNTP_RESET_RETRY_TIMEOUT();
+
+    sntp_process(receive_timestamp);
+
+    /* Set up timeout for next request */
+    sys_timeout(sntp_update_delay, sntp_request, NULL);
+    LWIP_DEBUGF(SNTP_DEBUG_STATE, ("sntp_recv: Scheduled next time request: %"U32_F" ms\n",
+      sntp_update_delay));
+  } else if (err == SNTP_ERR_KOD) {
+    /* Kiss-of-death packet. Use another server or increase UPDATE_DELAY. */
+    sntp_try_next_server(NULL);
+  } else {
+    /* another error, try the same server again */
+    sntp_retry(NULL);
+  }
+}
+
+/** Actually send an sntp request to a server.
+ *
+ * @param server_addr resolved IP address of the SNTP server
+ */
+static void
+sntp_send_request(ip_addr_t *server_addr)
+{
+  struct pbuf* p;
+  p = pbuf_alloc(PBUF_TRANSPORT, SNTP_MSG_LEN, PBUF_RAM);
+  if (p != NULL) {
+    struct sntp_msg *sntpmsg = (struct sntp_msg *)p->payload;
+    LWIP_DEBUGF(SNTP_DEBUG_STATE, ("sntp_send_request: Sending request to server\n"));
+    /* initialize request message */
+    sntp_initialize_request(sntpmsg);
+    /* send request */
+    udp_sendto(sntp_pcb, p, server_addr, SNTP_PORT);
+    /* set up receive timeout: try next server or retry on timeout */
+    sys_timeout((u32_t)SNTP_RECV_TIMEOUT, sntp_try_next_server, NULL);
+#if SNTP_CHECK_RESPONSE >= 1
+    /* save server address to verify it in sntp_recv */ 
+    ip_addr_set(&sntp_last_server_address, server_addr);
+#endif /* SNTP_CHECK_RESPONSE >= 1 */
+  } else {
+    LWIP_DEBUGF(SNTP_DEBUG_SERIOUS, ("sntp_send_request: Out of memory, trying again in %"U32_F" ms\n",
+      (u32_t)SNTP_RETRY_TIMEOUT));
+    /* out of memory: set up a timer to send a retry */
+    sys_timeout((u32_t)SNTP_RETRY_TIMEOUT, sntp_request, NULL);
+  }
+}
+
+#if SNTP_SERVER_DNS
+/**
+ * DNS found callback when using DNS names as server address.
+ */
+static void
+sntp_dns_found(const char* hostname, ip_addr_t *ipaddr, void *arg)
+{
+  LWIP_UNUSED_ARG(hostname);
+  LWIP_UNUSED_ARG(arg);
+
+  if (ipaddr != NULL) {
+    /* Address resolved, send request */
+    LWIP_DEBUGF(SNTP_DEBUG_STATE, ("sntp_dns_found: Server address resolved, sending request\n"));
+    sntp_send_request(ipaddr);
+  } else {
+    /* DNS resolving failed -> try another server */
+    LWIP_DEBUGF(SNTP_DEBUG_WARN_STATE, ("sntp_dns_found: Failed to resolve server address resolved, trying next server\n"));
+    sntp_try_next_server(NULL);
+  }
+}
+#endif /* SNTP_SERVER_DNS */
+
+/**
+ * Send out an sntp request via raw API.
+ *
+ * @param arg is unused (only necessary to conform to sys_timeout)
+ */
+static void
+sntp_request(void *arg)
+{
+  ip_addr_t sntp_server_address;
+  err_t err;
+
+  LWIP_UNUSED_ARG(arg);
+
+  /* initialize SNTP server address */
+#if SNTP_SERVER_DNS
+  err = dns_gethostbyname(sntp_server_addresses[sntp_current_server], &sntp_server_address,
+    sntp_dns_found, NULL);
+  if (err == ERR_INPROGRESS) {
+    /* DNS request sent, wait for sntp_dns_found being called */
+    LWIP_DEBUGF(SNTP_DEBUG_STATE, ("sntp_request: Waiting for server address to be resolved.\n"));
+    return;
+  }
+#else /* SNTP_SERVER_DNS */
+  err = ipaddr_aton(sntp_server_addresses[sntp_current_server], &sntp_server_address)
+    ? ERR_OK : ERR_ARG;
+
+#endif /* SNTP_SERVER_DNS */
+
+  if (err == ERR_OK) {
+    sntp_send_request(&sntp_server_address);
+  } else {
+    /* address conversion failed, try another server */
+    LWIP_DEBUGF(SNTP_DEBUG_WARN_STATE, ("sntp_request: Invalid server address, trying next server.\n"));
+    sys_timeout((u32_t)SNTP_RETRY_TIMEOUT, sntp_try_next_server, NULL);
+  }
+}
+
+/**
+ * Initialize this module when using raw API.
+ * Send out request instantly or after SNTP_STARTUP_DELAY.
+ */
+void
+sntp_init(void)
+{
+  char *def_addr[] = {SNTP_SERVER_ADDRESS};
+
+  sntp_num_servers = 0;
+  sntp_set_servers(def_addr, sizeof(def_addr) / sizeof(char*));
+
+  SNTP_RESET_RETRY_TIMEOUT();
+  sntp_pcb = udp_new();
+  LWIP_ASSERT("Failed to allocate udp pcb for sntp client", sntp_pcb != NULL);
+  if (sntp_pcb != NULL) {
+    udp_recv(sntp_pcb, sntp_recv, NULL);
+#if SNTP_STARTUP_DELAY
+    sys_timeout((u32_t)SNTP_STARTUP_DELAY, sntp_request, NULL);
+#else
+    sntp_request(NULL);
+#endif
+  }
+}
+
+#endif /* SNTP_SOCKET */
+
+/* Additions to allow dynamically settings servers and update delay */
+
+/**
+ * Set the NTP servers
+ */
+int sntp_set_servers(char *server_url[], int num_servers)
+{
+  int i;
+
+  /* Check number of servers requested */
+  if (SNTP_NUM_SERVERS_SUPPORTED < num_servers) return -1;
+
+  /* Free previously allocated buffers */
+  for (i = sntp_num_servers - 1; i >= 0; i--) {
+    free(sntp_server_addresses[i]);
+	sntp_server_addresses[i] = NULL;
+  }
+
+  /* Allocate memory and copy servers */
+  for (i = 0; i < num_servers; i++) {
+    sntp_server_addresses[i] = malloc(strlen(server_url[i]));
+    if (sntp_server_addresses[i]) {
+   	  strcpy(sntp_server_addresses[i], server_url[i]);
+    } else {
+	  sntp_num_servers = i;
+      return -2;
+    }
+  }
+  sntp_num_servers = num_servers;
+  return 0;
+}
+
+void sntp_set_update_delay(uint32_t ms)
+{
+	sntp_update_delay = ms > 15000?ms:15000;
+}
+
+#endif /* LWIP_UDP */

extras/sntp/sntp.h

@@ -0,0 +1,76 @@
+/************************************************************************//**
+ * RTC time keeping and synchronization using SNTP for esp-open-rtos.
+ * Uses SNTP lwIP contribution.
+ *
+ * 2016, Jesus Alonso (doragasu)
+ ****************************************************************************/
+
+#ifndef _SNTP_H_
+#define _SNTP_H_
+
+#include <stdint.h>
+#include <sys/time.h>
+#include <time.h>
+
+/*
+ * Function used by lwIP sntp module to update the date/time,
+ * with microseconds resolution.
+ */
+#define SNTP_SET_SYSTEM_TIME_US(sec, us) sntp_update_rtc(sec, us)
+
+/*
+ * For the lwIP implementation of SNTP to allow using names for NTP servers.
+ */
+#define SNTP_SERVER_DNS             1
+
+/*
+ * Number of supported NTP servers
+ */
+#define SNTP_NUM_SERVERS_SUPPORTED 	4
+
+/*
+ * Initialize the module, and start requesting SNTP updates. This function
+ * must be called only once.
+ * WARNING: tz->tz_dsttime doesn't have the same meaning as the standard 
+ * implementation. If it is set to 1, a dst hour will be applied. If set
+ * to zero, time will not be modified.
+ */
+void sntp_initialize(const struct timezone *tz);
+
+/*
+ * Sets time zone. Allowed values are in the range [-11, 13].
+ * NOTE: Settings do not take effect until SNTP time is updated. It is
+ * recommended to set these parameters only during initialization.
+ * WARNING: tz->tz_dsttime doesn't have the same meaning as the standard 
+ * implementation. If it is set to 1, a dst hour will be applied. If set
+ * to zero, time will not be modified.
+ */
+void sntp_set_timezone(const struct timezone *tz);
+
+/*
+ * Set SNTP servers. Up to SNTP_NUM_SERVERS_SUPPORTED can be set.
+ * Returns 0 if OK, less than 0 if error.
+ * NOTE: This function must NOT be called before sntp_initialize().
+ */
+int sntp_set_servers(char *server_url[], int num_servers);
+
+/*
+ * Sets the update delay in ms. If requested value is less than 15s,
+ * a 15s update interval will be set.
+ */
+void sntp_set_update_delay(uint32_t ms);
+
+/*
+ * Returns the time read from RTC counter, in seconds from Epoch. If
+ * us is not null, it will be filled with the microseconds.
+ */
+time_t sntp_get_rtc_time(int32_t *us);
+
+/*
+ * Update RTC timer. This function is called by the SNTP module each time
+ * an SNTP update is received.
+ */
+void sntp_update_rtc(time_t t, uint32_t us);
+
+#endif /* _SNTP_H_ */
+

extras/sntp/sntp_fun.c

@@ -0,0 +1,112 @@
+/*
+ * Auxiliary functions to handle date/time along with lwIP sntp implementation.
+ *
+ * Jesus Alonso (doragasu)
+ */
+
+#include <sys/reent.h>
+#include <sys/types.h>
+#include <sys/errno.h>
+#include <stdio.h>
+#include <espressif/esp_common.h>
+#include <esp/timer.h>
+#include <esp/rtc_regs.h>
+#include "sntp.h"
+
+#define TIMER_COUNT			RTC.COUNTER
+
+// daylight settings
+// Base calculated with value obtained from NTP server (64 bits)
+#define sntp_base	(*((uint64_t*)RTC.SCRATCH))
+// Timer value when base was obtained
+#define tim_ref 	(RTC.SCRATCH[2])
+// Calibration value
+#define cal 		(RTC.SCRATCH[3])
+
+// Timezone related data.
+static struct timezone stz;
+
+// Implemented in sntp.c
+void sntp_init(void);
+
+// Sets time zone.
+// NOTE: Settings do not take effect until SNTP time is updated.
+void sntp_set_timezone(const struct timezone *tz) {
+	if (tz) {
+		stz = *tz;
+	} else {
+		stz.tz_minuteswest = 0;
+		stz.tz_dsttime = 0;
+	}
+}
+
+// Initialization
+void sntp_initialize(const struct timezone *tz) {
+	if (tz) {
+		stz = *tz;
+	} else {
+		stz.tz_minuteswest = 0;
+		stz.tz_dsttime = 0;
+	}
+	sntp_base = 0;
+	// To avoid div by 0 exceptions if requesting time before SNTP config
+	cal = 1;
+	tim_ref = TIMER_COUNT;
+	sntp_init();
+}
+
+// Check if a timer wrap has occurred. Compensate sntp_base reference
+// if affirmative.
+// TODO: think about multitasking and race conditions
+static inline void sntp_check_timer_wrap(uint32_t current_value) {
+	if (current_value < tim_ref) {
+		// Timer wrap has occurred, compensate by subtracting 2^32 to ref.
+		sntp_base -= 1LLU<<32;
+		// DEBUG
+		printf("\nTIMER WRAPPED!\n");
+	}
+}
+
+// Return secs. If us is not a null pointer, fill it with usecs
+inline time_t sntp_get_rtc_time(int32_t *us) {
+	time_t secs;
+	uint32_t tim;
+	uint64_t base;
+
+	tim = TIMER_COUNT;
+	// Check for timer wrap
+	sntp_check_timer_wrap(tim);
+	base = sntp_base + tim - tim_ref;
+	secs = base * cal / (1000000U<<12);
+	if (us) {
+		*us = base * cal % (1000000U<<12);
+	}
+	return secs;
+}
+
+// Syscall implementation. doesn't seem to use tzp.
+int _gettimeofday_r(struct _reent *r, struct timeval *tp, void *tzp) {
+	(void)r;
+	// Syscall defined by xtensa newlib defines tzp as void*
+	// So it looks like it is not used. Also check tp is not NULL
+	if (tzp || !tp) return EINVAL;
+
+	tp->tv_sec = sntp_get_rtc_time((int32_t*)&tp->tv_usec);
+	return 0;
+}
+
+// Update RTC timer. Called by SNTP module each time it receives an update.
+void sntp_update_rtc(time_t t, uint32_t us) {
+	// Apply daylight and timezone correction
+	t += (stz.tz_minuteswest + stz.tz_dsttime * 60) * 60;
+	// DEBUG: Compute and print drift
+	int64_t sntp_current = sntp_base + TIMER_COUNT - tim_ref;
+	int64_t sntp_correct = (((uint64_t)us + (uint64_t)t * 1000000U)<<12) / cal;
+	printf("\nRTC Adjust: drift = %ld ticks, cal = %d\n", (time_t)(sntp_correct - sntp_current), cal);
+
+	tim_ref = TIMER_COUNT;
+	cal = sdk_system_rtc_clock_cali_proc();
+
+	sntp_base = (((uint64_t)us + (uint64_t)t * 1000000U)<<12) / cal;
+}
+

include/espressif/esp8266/eagle_soc.h

@@ -66,7 +66,7 @@
 //}}
 
 //DPORT{{
-#define HOST_INF_SEL                (0x28)
+#define HOST_INF_SEL                (PERIPHS_DPORT_BASEADDR + 0x28)
 #define DPORT_LINK_DEVICE_SEL       0x000000FF
 #define DPORT_LINK_DEVICE_SEL_S     8
 #define DPORT_PERI_IO_SWAP          0x000000FF

include/espressif/phy_info.h

@@ -0,0 +1,482 @@
+/** Internal Espressif SDK "PHY info" data structure
+
+   The data structure (sdk_phy_info_t) is used to configure the
+   ESP8266 PHY layer via the SDK. The fields here are not written
+   directly to hardware, the SDK code (mostly in libphy) parses this
+   structure and configures the hardware.
+
+   The structure loaded at reset time from a flash configuration
+   sector (see read_saved_phy_info()) (Espressif's SDK sources this
+   from a file "esp_init_data_default.bin"). If no valid structure is
+   found in the flash config sector then the SDK loads default values
+   (see get_default_phy_info()). It is possible to implement a custom
+   get_default_phy_info() to change the PHY default settings (see the
+   'version' field below).
+
+   @note It is possible that the SDK will quietly write a new
+   configuration sector to flash itself following internal
+   calibration, etc. However this does not seem to happen, you need to
+   flash it explicitly if you want it stored there.
+
+   @note Most of what is below is unconfirmed, except where a @note
+   says that it has been confirmed to work as expected. Please
+   consider submitting notes if you find behaviour here that works or
+   doesn't work as expected.
+
+   Information on the meaning/offset of fields comes from Espressif's
+   flash download tool, which uses an Excel spreadsheet (in the
+   init_data directory of the ZIP file) to configure and a Python
+   script to convert an esp_init_data_custom.bin file to flash:
+   http://bbs.espressif.com/viewtopic.php?f=5&t=433
+
+   Many fields remain undocumented (& disassembly of libphy suggests
+   that some documented fields supported undocumented values.)
+
+   A few additional notes about the phy_info fields can be found
+   in the ESP Arduino ESP8266 phy_init_data structure (however most of
+   that content is verbatim from Espressif's spreadsheet):
+   https://github.com/esp8266/Arduino/blob/master/cores/esp8266/core_esp8266_phy.c#L29
+
+   Part of esp-open-rtos. Copyright (C) 2016 Angus Gratton,
+   BSD Licensed as described in the file LICENSE.
+ */
+#ifndef _ESPRESSIF_PHY_INFO_H
+#define _ESPRESSIF_PHY_INFO_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <stddef.h>
+
+/* CRYSTAL_FREQ_xx values as used by sdk_phy_info_t.crystal_freq */
+#define CRYSTAL_FREQ_40M 0
+#define CRYSTAL_FREQ_26M 1
+#define CRYSTAL_FREQ_24M 2
+
+/* SDIO_CONFIG_xx values as used by sdk_phy_info_t.sdio_config */
+#define SDIO_CONFIG_AUTO 0   /* Uses pin strapping to determine */
+#define SDIO_CONFIG_SDIOV1_1 /* Data output on negative edge */
+#define SDIO_CONFIG_SDIOV2_0 /* data output on positive edge */
+
+/* BT_COEXIST_CONFIG_xx values as used by sdk_phy_info_t.bt_coexist */
+/* No bluetooth */
+#define BT_COEXIST_CONFIG_NONE 0
+/* Coexistence configuration A:
+   GPIO 0  - WLAN_ACTIVE
+   GPIO 14 - BT_ACTIVE
+   GPIO 13 - BT_PRIORITY
+   GPIO 3  - ANT_SEL_BT
+*/
+#define BT_COEXIST_CONFIG_A 1
+/* No coexistence, but Bluetooth enabled?
+   Unsure how this works?
+ */
+#define BT_COEXIST_CONFIG_PRESENT 2
+/* Coexistence configuration B:
+   GPIO 0 - WLAN_ACTIVE
+   GPIO 14 - BT_PRIORITY
+   GPIO 13 - BT_ACTIVE
+   GPIO 3  - ANT_SEL_BT
+*/
+#define BT_COEXIST_CONFIG_B 3
+
+/* BT_COEXIST_PROTOCOL_xx values for coexistence protocol,
+   field sdk_phy_info_t.bt_coexist_protocol
+ */
+#define BT_COEXIST_PROTOCOL_WIFI_ONLY 0
+#define BT_COEXIST_PROTOCOL_BT_ONLY 1
+
+/* Coexistence is enabled, Bluetooth has its own antenna */
+#define BT_COEXIST_PROTOCOL_FLAG_SEPARATE_ANT 2
+/* Coexistence is enabled, Bluetooth shares WiFi antenna */
+#define BT_COEXIST_PROTOCOL_FLAG_SHARE_ANT 4
+
+/* Coexistence is enabled, use only BT_ACTIVE signal */
+#define BT_COEXIST_PROTOCOL_FLAG_BT_ACTIVE_ONLY 0
+/* Coexistence is enabled, use both BT_ACTIVE and BT_PRIORITY signals */
+#define BT_COEXIST_PROTOCOL_FLAG_BT_ACTIVE_PRIORITY 1
+
+/* DUAL_ANT_CONFIG_xx values for dual antenna config,
+   field sdk_phy_info_t.dual_ant_config
+
+   (Not really clear how this feature works, if at all.)
+*/
+#define DUAL_ANT_CONFIG_NONE 0
+/* antenna diversity for WiFi, use GPIO0 + U0RXD (?) */
+#define DUAL_ANT_CONFIG_DUAL 1
+/* TX/RX switch for external PA & LNA: GPIO 0 high, GPIO 3 low during TX */
+#define DUAL_ANT_CONFIG_TX_GPIO0_HIGH_GPIO3_LOW
+/* TX/RX switch for external PA & LNA: GPIO 0 low, GPIO 3 high during TX */
+#define DUAL_ANT_CONFIG_TX_GPIO0_LOW_GPIO3_HIGH
+
+
+/* CRYSTAL_SLEEP_xx values used for sdk_phy_info_t.crystal_sleep
+ */
+#define CRYSTAL_SLEEP_OFF 0
+#define CRYSTAL_SLEEP_ON 1
+#define CRYSTAL_SLEEP_GPIO16 2
+#define CRYSTAL_SLEEP_GPIO2 3
+
+/* RF Stage 0 & 1 attenuation constants. Use for sdk_phy_info_t.lp_atten_stage01
+
+   @note These values have been tested and are confirmed to work as
+   expected by measuring RSSI w/ rt73 USB adapter in monitor mode
+   (some values also checked on spectrum analyzer) - provided
+   low_power_en is set then the signal is attenuated as per this
+   setting.
+
+   (It may look like LP_ATTEN_STAGE01_11_5DB is out of order, but
+   according to monitor mode captures this is the correct ordering of
+   these constants.)
+
+   Setting the numeric values in between these constants appears to
+   also attenuate the signal, but not necessarily by the amount you'd
+   expect.
+*/
+#define LP_ATTEN_STAGE01_0DB    0x0f /*     0dB */
+#define LP_ATTEN_STAGE01_2_5DB  0x0e /*  -2.5dB */
+#define LP_ATTEN_STAGE01_6DB    0x0d /*    -6dB */
+#define LP_ATTEN_STAGE01_8_5DB  0x09 /*  -8.5dB */
+#define LP_ATTEN_STAGE01_11_5DB 0x0c /* -11.5dB */
+#define LP_ATTEN_STAGE01_14DB   0x08 /*   -14dB */
+#define LP_ATTEN_STAGE01_17_5DB 0x04 /* -17.5dB */
+#define LP_ATTEN_STAGE01_23DB   0x00 /*   -23dB */
+
+/* Constant for sdk_phy_info_t.pa_vdd */
+#define PA_VDD_MEASURE_VCC 0xFF
+
+/* Bitmask flags for sdk_phy_info_t.freq_correct_mode */
+
+/* Set this flag to disable frequency offset correction */
+#define FREQ_CORRECT_DISABLE 0
+
+/* Set this flag to enable frequency offset correction */
+#define FREQ_CORRECT_ENABLE BIT(0)
+
+/* Set = Baseband PLL frequency is 160MHz (can only apply +ve offset)
+ * Unset = Baseband PLL frequency is 168MHz (can apply +ve/-ve offset */
+#define FREQ_CORRECT_BB_160M BIT(1)
+
+/* Set = use force_freq_offset field to correct, Unset = automatically
+   measure & correct offset
+*/
+#define FREQ_CORRECT_FORCE BIT(2)
+
+
+/* RF_CAL_MODE_xx fields used for sdk_phy_info_t.rf_cal_mode
+ */
+/* Use saved RF CAL data from flash, only. RF init takes 2ms. */
+#define RF_CAL_MODE_SAVED 0
+/* Calibrate TX power control only, use saved RF CAL data for others.
+   RF init takes 20ms. */
+#define RF_CAL_MODE_TXPOWER_ONLY 1
+/* Unclear if/how this mode is different to 2? */
+#define RF_CAL_MODE_SAVED_2 2
+/* Run full RF CAL routine. RF init takes approx 200ms. */
+#define RF_CAL_MODE_FULL 3
+
+/* Data structure that maps to the phy_info configuration block */
+typedef struct __attribute__((packed)) {
+    uint8_t _reserved00[0x05]; /* 0x00 - 0x04 */
+
+    /* This "version" field was set to 5 in the SDK phy_info,
+       and the original SDK startup code checks it is 5 and then loads
+       default PHY configuration otherwise.
+
+       esp-open-rtos will load phy_info from get_default_phy_info() if
+       the value stored in flash has a different value to the value
+       returned in get_default_phy_info(). This means you can
+       increment the version return by get_default_phy_info() (to any
+       value but 0xFF), and know that the new defaults will replace
+       any older stored values.
+
+       @notes It's not clear whether this is actually a version field
+       (the other 24 bytes here have equally arbitrary numbers in
+       them.) Changing the "version" to other values does not seem to
+       effect WiFi performance at all, neither does zeroing out the
+       first 5 reserved bytes in _reserved00. However zeroing bytes in
+       the _reserved06 region will break WiFi entirely.
+    */
+    uint8_t version;          /* 0x05 */
+    int8_t _reserved06[0x14]; /* 0x06 - 0x19 */
+
+    /* spur_freq = spur_freq_primary / spur_freq_divisor */
+    uint8_t spur_freq_primary; /* 0x1a */
+    uint8_t spur_freq_divisor; /* 0x1b */
+
+    /* Bitmask to enable spur_freq for each channel
+       Appears to be a big endian short word?
+     */
+    uint8_t spur_freq_en_h;      /* 0x1c */
+    uint8_t spur_freq_en_l;      /* 0x1d */
+
+    uint8_t _reserved1e[4];   /* 0x1e - 0x21 */
+
+    /* Each value is a target power level.
+       Units are 1/4 dBm ie value 64 = 16dBm.
+
+       SDK defaults to using these transmit powers:
+	   20.5dBm, 19.5dBm, 18.5dBm, 17dBm, 16dBm, 14dBm
+
+	   @note Adjusting these values is confirmed to reduce
+	   transmit power accordingly.
+    */
+    uint8_t target_power[6]; /* 0x22 - 0x27 */
+
+    /* Maps 8 MCS (modulation & coding schemes) types for 802.11b, g &
+     * n to a target_power level index (0-5), set above.
+
+     This mapping of MCS slot to MCS type is derived from the
+     spreadsheet and also a table sent by Espressif, but is untested
+     and may be SDK version dependendent (especially any 802.11n
+     rates). However the general relationship is confirmed to hold
+     (higher MCS index = higher bit rate).
+
+     MCS 0: 1Mbps/2Mbps/5.5Mbps/11Mbps (802.11b) / 6Mbps/9Mbps (802.11g)
+         default target_power 0 (default 20.5dBm)
+         (see also pwr_ind_11b_en)
+
+     MCS 1: 12Mbps (802.11g)
+         default target_power 0 (default 20.5dBm)
+
+     MCS 2: 18Mbps (802.11g)
+         default target_power 1 (19.5dBm)
+
+     MCS 3: 24Mbps (802.11g)
+         default target_power 1 (19.5dBm)
+
+     MCS 4: 36Mbps (802.11g)
+         default target_power 2 (18.5dBm)
+
+     MCS 5: 48Mbps (802.11g)
+         default target_power 3 (17dBm)
+
+     MCS 6: 54Mbps (802.11g)
+         default target_power 4 (16dBm)
+
+     MCS 7: 65Mbps (802.11n) - unclear if ever used?
+         default target_power 5 (14dBm)
+    */
+    uint8_t target_power_index_mcs[8]; /* 0x28 - 0x2f */
+
+    /* One of CRYSTAL_FREQ_40M / CRYSTAL_FREQ_26M / CRYSTAL_FREQ_24M
+
+	   The crystal configured here is the input to the PLL setting
+	   calculations which are used to derive the CPU & APB peripheral
+	   clock frequency, and probably the WiFi PLLs (unconfirmed.)
+	 */
+    uint8_t crystal_freq; /* 0x30 */
+
+    uint8_t _unused31; /* 0x31: Possibly high byte of crystal freq? */
+
+    /* One of SDIO_CONFIG_AUTO, SDIO_CONFIG_SDIOV1_1, SDIO_CONFIG_SDIOV2_0 */
+    uint8_t sdio_config; /* 0x32 */
+
+    /* BT coexistence pin configuration.
+
+       One of BT_COEXIST_CONFIG_NONE, BT_COEXIST_CONFIG_A,
+       BT_COEXIST_CONFIG_PRESENT, BT_COEXIST_CONFIG_B
+    */
+    uint8_t bt_coexist_config; /* 0x33 */
+
+    /* BT coexistence pin protocol.
+
+       If no coexistence:
+       Either BT_COEXIST_PROTOCOL_WIFI_ONLY, or
+       BT_COEXIST_PROTOCOL_BT_ONLY.
+
+       If coexistence:
+       Combine one of
+       BT_COEXIST_PROTOCOL_FLAG_SEPARATE_ANT or
+       BT_COEXIST_PROTOCOL_FLAG_SHARE_ANT
+       with one of
+       BT_COEXIST_PROTOCOL_FLAG_BT_ACTIVE_ONLY or
+       BT_COEXIST_PROTOCOL_FLAG_BT_ACTIVE_BT_PRIORITY
+    */
+    uint8_t bt_coexist_protocol; /* 0x34 */
+
+    /* Dual antenna configuration
+
+       One of DUAL_ANT_CONFIG_NONE, DUAL_ANT_CONFIG_DUAL,
+       DUAL_ANT_CONFIG_TX_GPIO0_HIGH_GPIO3_LOW,
+       DUAL_ANT_CONFIG_TX_GPIO0_LOW_GPIO3_HIGH
+    */
+    uint8_t dual_ant_config; /* 0x35 */
+
+    uint8_t _reserved34; /* 0x36 */
+
+    /* For sharing crystal clock with other devices:
+       one of CRYSTAL_SLEEP_OFF, CRYSTAL_SLEEP_ON,
+       CRYSTAL_SLEEP_GPIO16, CRYSTAL_SLEEP_GPIO2
+    */
+    uint8_t crystal_sleep; /* 0x37 */
+
+    uint8_t _unused38[8];
+
+    /* spur_freq_2 = spur_freq_2_primary / spur_freq_2_divisor */
+    uint8_t spur_freq_2_primary; /* 0x40 */
+    uint8_t spur_freq_2_divisor; /* 0x41 */
+
+    /* Bitmask to enable spur_freq_2 for each channel?
+       Appears to be a big endian short word?
+    */
+    uint8_t spur_freq_2_en_h; /* 0x42 */
+    uint8_t spur_freq_2_en_l; /* 0x43 */
+
+    /* Not really clear what these do */
+    uint8_t spur_freq_cfg_msb; /* 0x44 */
+    uint8_t spur_freq_2_cfg_msb; /* 0x45 */
+    uint16_t spur_freq_3_cfg; /* 0x46 - 0x47 */
+    uint16_t spur_freq_4_cfg; /* 0x48 - 0x49 */
+
+    uint8_t _reserved4a[4]; /* 0x4a - 0x4d */
+
+    uint8_t _unused78[15]; /* 0x4e - 0x5c */
+
+    /* Flag to enable low power mode */
+    uint8_t low_power_en; /* 0x5d */
+
+    /* Low Power attenuation of RF gain stages 0 & 1
+
+       Attenuates transmit power if/when low_power_en is set.
+
+       Use one of the constants LP_ATTEN_STAGE01_0DB,
+       LP_ATTEN_STAGE01_2_5DB, LP_ATTEN_STAGE01_6DB,
+       LP_ATTEN_STAGE01_8_5DB, LP_ATTEN_STAGE01_11_5DB,
+       LP_ATTEN_STAGE01_14DB, LP_ATTEN_STAGE01_17_5DB,
+       LP_ATTEN_STAGE01_23DB.
+     */
+    uint8_t lp_atten_stage01; /* 0x5e */
+
+    /* Low Power(?) attenuation of baseband gain
+
+       Units are minus 1/4 dB, ie value 4 == -1dB.
+
+       Maximum value is 24 (0x18) == -6dB
+     */
+    uint8_t lp_atten_bb; /* 0x5f */
+
+    /* I believe this means, when pwr_ind_11b_en == 0 then the 802.11g
+       MCS 0 level from target_power_index_mcs are used to
+       determine 802.11b transmit power level.
+
+       However, when pwr_ind_11b_en == 1 then the index values in
+       pwr_ind_11b_0 & pwr_ind_11b_1 are used for 802.11b instead.
+
+       This is all unconfirmed, if you can confirm then please update
+       this comment.
+     */
+    uint8_t pwr_ind_11b_en; /* 0x60 */
+
+    /* 802.11b low data rate power index (0~5).
+       Sets the power level index for operation at 1 & 2Mbps
+    */
+    uint8_t pwr_ind_11b_0; /* 0x61 */
+
+    /* 802.11b high data rate power index (0~5)
+       Sets the power level index for operation at 5.5 & 11Mbps
+    */
+    uint8_t pwr_ind_11b_1; /* 0x62 */
+
+    uint8_t _unused63[8]; /* 0x63 - 0x6a */
+
+    /* Set the voltage of PA_VDD, which appears to be an internal analog
+       reference voltage(?)
+
+       This field is called vdd33_const in the Arduino phy fields,
+       and relates to usage of the TOUT pin (ADC pin).
+
+       Set to PA_VDD_MEASURE_VCC (0xFF) and leave TOUT (ADC) pin
+       floating in order to use the ADC to measure the 3.3V input
+       voltage.
+
+       Set to value in the range 18-36 (1.8V to 3.6V) to set a
+       reference voltage(?) when using TOUT pin as an ADC input. I
+       think this is the reference voltage used to scale the 0-1V
+       which is allowed on the pin, in order to get an accurate
+       reading. So it should be set to a value that matches system
+       VCC... I think!
+    */
+    uint8_t pa_vdd; /* 0x6b */
+
+    /* Disable RF calibration cycle for this many times */
+    uint8_t disable_rfcal_count; /* 0x6c */
+
+    uint8_t _unused6d[3];
+
+    /* Flags for frequency correction
+
+       A bitmask combination of any of: FREQ_CORRECT_DISABLE,
+       FREQ_CORRECT_ENABLE, FREQ_CORRECT_BB_160M, FREQ_CORRECT_FORCE
+     */
+    uint8_t freq_correct_mode; /* 0x70 */
+
+    /* Force frequency offset adjustment (instead of auto measuring)
+       units are 1 = 8kHz, full range +/- 1016kHz.
+
+       Only used if FREQ_CORRECT_ENABLE and FREQ_CORRECT_FORCE are
+       set in freq_correct_mode.
+
+       Unclear whether setting FREQ_CORRECT_BB_160M (which allows only positive offsets) changes the usable range.
+    */
+    int8_t force_freq_offset; /* 0x71 */
+
+    /* Use stored data in flash for RF calibration.
+
+       This field was previously called rf_cal_use_flash.
+
+       Acceptable values one of RF_CAL_MODE_SAVED, RF_CAL_MODE_TXPOWER_ONLY, RF_CAL_MODE_SAVED_2, RF_CAL_MODE_FULL.
+     */
+    uint8_t rf_cal_mode; /* 0x72 */
+
+    uint8_t _unused73[13];
+} sdk_phy_info_t;
+
+/* Some sanity check static assertions. These can probably be
+   removed after this structure has been better tested.
+*/
+_Static_assert(sizeof(sdk_phy_info_t) == 128, "sdk_phy_info_t is wrong size!");
+_Static_assert(offsetof(sdk_phy_info_t, version) == 5, "version at wrong offset");
+_Static_assert(offsetof(sdk_phy_info_t, target_power) == 34, "target_power_qdb at wrong offset");
+_Static_assert(offsetof(sdk_phy_info_t, bt_coexist_protocol) == 52, "bt_coexist_protocol at wrong offset");
+_Static_assert(offsetof(sdk_phy_info_t, spur_freq_2_primary) == 64, "spur_freq_2_primary at wrong offset");
+_Static_assert(offsetof(sdk_phy_info_t, lp_atten_stage01) == 94, "lp_atten_stage01 at wrong offset");
+_Static_assert(offsetof(sdk_phy_info_t, pa_vdd) == 107, "pa_vdd aka vdd33_const at wrong offset");
+_Static_assert(offsetof(sdk_phy_info_t, rf_cal_mode) == 114, "rf_cal_use_flash at wrong offset!");
+
+/* Read the default PHY info into the supplied structure.
+
+   This function is weak-aliased to get_sdk_default_phy_info() so you
+   can replace it with your own if you want to vary the default values
+   - suggested way to do this is to call get_sdk_default_phy_info()
+   and then only update the fields you care about.
+
+   The default PHY info is used at startup whenever the version field
+   in the default sdk_phy_info_t does not match the version field
+   stored in flash. So you can increment the version field to force a
+   reset to defaults, regardless of what values are in flash.
+*/
+void get_default_phy_info(sdk_phy_info_t *info);
+
+/* Read the "SDK default" PHY info as used by the Espressif SDK */
+void get_sdk_default_phy_info(sdk_phy_info_t *info);
+
+/* Read the PHY info currently stored in the SPI flash SDK configuration sector.
+
+   This PHY info is updated by the SDK following RF calibration, etc.
+
+   Note that the saved data may be corrupt - read the 'version' field to verify.
+*/
+void read_saved_phy_info(sdk_phy_info_t *info);
+
+/* Update the saved PHY info in the SPI flash. A reset is necessary to use these values.
+
+   Note that the SDK may clobber these values, so it's recommended you reset ASAP after updating them.
+*/
+void write_saved_phy_info(const sdk_phy_info_t *info);
+
+/* Dump known fields in the phy info structure to stdout,
+   if 'raw' flag is set then the raw hex values are also dumped.
+*/
+void dump_phy_info(const sdk_phy_info_t *info, bool raw);
+
+#endif

include/espressif/queue.h

@@ -1,6 +1,61 @@
+/*
+ * Copyright (c) 1991, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 4. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ */
+
 #ifndef _SYS_QUEUE_H_
 #define	_SYS_QUEUE_H_
 
+/*
+ * Note: This header file comes to us from the Espressif
+ * SDK. Espressif adapted it from BSD's queue.h. The BSD copyright
+ * notice and the following extract from the explanatory statement
+ * were re-added by esp-open-rtos.
+ *
+ * FreeBSD version of this header:
+ * https://svnweb.freebsd.org/base/head/sys/sys/queue.h?view=markup
+ *
+ * ****
+ *
+ * A singly-linked list is headed by a single forward pointer. The elements
+ * are singly linked for minimum space and pointer manipulation overhead at
+ * the expense of O(n) removal for arbitrary elements. New elements can be
+ * added to the list after an existing element or at the head of the list.
+ * Elements being removed from the head of the list should use the explicit
+ * macro for this purpose for optimum efficiency. A singly-linked list may
+ * only be traversed in the forward direction.  Singly-linked lists are ideal
+ * for applications with large datasets and few or no removals or for
+ * implementing a LIFO queue.
+ *
+ * For details on the use of these macros, see the queue(3) manual page.
+ *
+ */
+
 #define	QMD_SAVELINK(name, link)
 #define	TRASHIT(x)
 

include/espressif/spi_flash.h

@@ -33,7 +33,7 @@ sdk_SpiFlashOpResult sdk_spi_flash_erase_sector(uint16_t sec);
 /* Write data to flash.
 
    des_addr is byte offset to write to. Should be 4-byte aligned.
-   src is pointer to a buffer to read bytes from.
+   src is pointer to a buffer to read bytes from. Should be 4-byte aligned.
    size is length of buffer in bytes. Should be a multiple of 4.
 */
 sdk_SpiFlashOpResult sdk_spi_flash_write(uint32_t des_addr, uint32_t *src, uint32_t size);
@@ -41,7 +41,7 @@ sdk_SpiFlashOpResult sdk_spi_flash_write(uint32_t des_addr, uint32_t *src, uint3
 /* Read data from flash.
 
    src_addr is byte offset to read from. Should be 4-byte aligned.
-   des is pointer to a buffer to read bytes into.
+   des is pointer to a buffer to read bytes into. Should be 4-byte aligned.
    size is number of bytes to read. Should be a multiple of 4.
 */
 sdk_SpiFlashOpResult sdk_spi_flash_read(uint32_t src_addr, uint32_t *des, uint32_t size);

ld/nonota.ld

@@ -1,15 +0,0 @@
-/* Memory layout for esp-open-rtos when not using OTA
-   (ie ROM bootloader only, no second stage rboot)
- */
-MEMORY
-{
-  dport0_0_seg :                      	org = 0x3FF00000, len = 0x10
-  dram0_0_seg :                       	org = 0x3FFE8000, len = 0x14000
-  iram1_0_seg :                       	org = 0x40100000, len = 0x08000
-/* irom0 section, mapped from SPI flash
-  - Origin is offset by 0x20000 to leave space for bootloader RAM sections.
-
-  - Length is max 8Mbit of mappable flash, minus start offset
-*/
-  irom0_0_seg :                       	org = 0x40220000, len = (1M - 0x20000)
-}

ld/ota.ld

@@ -1,15 +0,0 @@
-/* Memory layout for esp-open-rtos when using OTA second stage bootloader */
-
-MEMORY
-{
-  dport0_0_seg :                      	org = 0x3FF00000, len = 0x10
-  dram0_0_seg :                       	org = 0x3FFE8000, len = 0x14000
-  iram1_0_seg :                       	org = 0x40100000, len = 0x08000
-/* irom0 section, mapped from SPI flash
-  - Origin is offset by 0x2010 to create spacer for second stage bootloader image,
-    header.
-
-  - Length is max 8Mbit of mappable flash, minus start offset
-*/
-  irom0_0_seg :                       	org = 0x40202010, len = (1M - 0x2010)
-}

ld/program.ld

@@ -1,7 +1,17 @@
-/*
+/* Memory layout for esp-open-rtos when using OTA second stage bootloader */
- * Common (OTA and non-OTA) parts for the esp-open-rtos Linker Script
+MEMORY
- *
+{
- */
+  dport0_0_seg :                      	org = 0x3FF00000, len = 0x10
+  dram0_0_seg :                       	org = 0x3FFE8000, len = 0x14000
+  iram1_0_seg :                       	org = 0x40100000, len = 0x08000
+/* irom0 section, mapped from SPI flash
+  - Origin is offset by 0x2010 to create spacer for second stage bootloader image,
+    header.
+
+  - Length is max 8Mbit of mappable flash, minus start offset
+*/
+  irom0_0_seg :                       	org = 0x40202010, len = (1M - 0x2010)
+}
 
 /* FreeRTOS memory management functions
 
@@ -132,43 +142,6 @@ SECTIONS
     _etext = .;
   } >iram1_0_seg :iram1_0_phdr
 
-  .irom0.text : ALIGN(4)
-  {
-    _irom0_text_start = ABSOLUTE(.);
-    /* esp-open-rtos compiled code goes into IROM by default
-       (except for libgcc which is matched above.)
-    */
-    *(.literal .text .literal.* .text.*)
-    /* Anything explicitly marked as "irom" or "irom0" should go here */
-    *(.irom.* .irom.*.* .irom0.*)
-    _irom0_text_end = ABSOLUTE(.);
-
-    /* Temporary .rodata hacks start here, eventually all rodata will
-    be in irom by default */
-    /* mbedtls rodata */
-    *mbedtls.a:*.o(.rodata.* .rodata)
-    /* actual certificate in example (TEMPORARY HACK) */
-    *:cert.o(.rodata.* .rodata)
-    /*  C++ constructor and destructor tables, properly ordered:  */
-    __init_array_start = ABSOLUTE(.);
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    __init_array_end = ABSOLUTE(.);
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    /*  C++ exception handlers table:  */
-    __XT_EXCEPTION_DESCS__ = ABSOLUTE(.);
-    *(.xt_except_desc)
-    *(.gnu.linkonce.h.*)
-    __XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.);
-    *(.xt_except_desc_end)
-
-  } >irom0_0_seg :irom0_0_phdr
-
   .data : ALIGN(4)
   {
     _data_start = ABSOLUTE(.);
@@ -186,29 +159,37 @@ SECTIONS
     _data_end = ABSOLUTE(.);
   } >dram0_0_seg :dram0_0_phdr
 
+  /* rodata in DRAM
+
+     cherry-picked compilation units that need rodata
+     to be in DRAM - anything that may be run while
+     SPI flash is unmapped (ie IRAM functions that are
+     called from interrupt context or spi flash management
+     functions) need their compilation units listed here.
+
+     If you have constant data that is performance-critical,
+     list the compilation unit(s) here as well.
+  */
   .rodata : ALIGN(4)
   {
     _rodata_start = ABSOLUTE(.);
-    *(.rodata)
+
-    *(.rodata.*)
+    /* Store all of core, libc, freertos .rodata in RAM by default
-    *(.gnu.linkonce.r.*)
+       (some parts are necessary, some parts for performance reasons.)
-    *(.rodata1)
+    */
-    __XT_EXCEPTION_TABLE__ = ABSOLUTE(.);
+    *core.a:*(.rodata.* .rodata) *libc.a:*.o(.rodata.* .rodata)
-    *(.xt_except_table)
+    *freertos.a:*(.rodata.* .rodata)
-    *(.gcc_except_table)
+
-    *(.gnu.linkonce.e.*)
+    /* spi flash management rodata needs to be accessed
-    *(.gnu.version_r)
+       while flash is unmapped. */
-    *(.eh_frame)
+    *libmain.a:spi_flash.o(.rodata.* .rodata)
-    . = (. + 3) & ~ 3;
+
-    *(.dynamic)
+    /* libpp wdev.o has the NMI handler (sdk_wDev_ProcessFiq)
-    *(.gnu.version_d)
+       which runs at all times, flash mapped or not. */
-    . = ALIGN(4);		/* this table MUST be 4-byte aligned */
+    *libpp.a:wdev.o(.rodata.* .rodata)
-    _bss_table_start = ABSOLUTE(.);
+
-    LONG(_bss_start)
-    LONG(_bss_end)
-    _bss_table_end = ABSOLUTE(.);
     _rodata_end = ABSOLUTE(.);
-  } >dram0_0_seg :dram0_0_phdr
+  } > dram0_0_seg :dram0_0_phdr
 
   .bss ALIGN(8) (NOLOAD) : ALIGN(4)
   {
@@ -232,7 +213,72 @@ SECTIONS
     _heap_start = ABSOLUTE(.);
 /*    _stack_sentry = ALIGN(0x8); */
   } >dram0_0_seg :dram0_0_bss_phdr
-/* __stack = 0x3ffc8000; */
+/* __stack = 0x3ffc8000; <-- this value seems a bit odd, stack on sdk_user_start is ~0x3ffffce9 */
+
+
+   /* All data that goes to flash (IROM) ends up in this section */
+  .irom0.text : ALIGN(4)
+  {
+    /*****************************
+     * Actual irom0 text section *
+     *****************************/
+
+    _irom0_text_start = ABSOLUTE(.);
+    /* esp-open-rtos compiled code goes into IROM by default
+       (except for libgcc which is matched above.)
+
+       We also link .rodata here in the hope that data is stored near
+       its code on the flash (in practice this doesn't quite happen. :/)
+    */
+    *(.literal .text .literal.* .text.* .rodata .rodata.*)
+    /* Anything explicitly marked as "irom" or "irom0" should go here */
+    *(.irom.* .irom.*.* .irom0.*)
+    _irom0_text_end = ABSOLUTE(.);
+
+    /**************************************************************
+      C++ constructor and destructor tables, properly ordered:
+     **************************************************************/
+    __init_array_start = ABSOLUTE(.);
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    __init_array_end = ABSOLUTE(.);
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+
+    /***********************************
+       C++ exception handlers table:  *
+     **********************************/
+    __XT_EXCEPTION_DESCS__ = ABSOLUTE(.);
+    *(.xt_except_desc)
+    *(.gnu.linkonce.h.*)
+    __XT_EXCEPTION_DESCS_END__ = ABSOLUTE(.);
+    *(.xt_except_desc_end)
+
+    /***********************************
+     Additional .rodata special sections
+     stored in flash
+     ************************************/
+    . = ALIGN(4);
+    *(.gnu.linkonce.r.*)
+    __XT_EXCEPTION_TABLE__ = ABSOLUTE(.);
+    *(.xt_except_table)
+    *(.gcc_except_table)
+    *(.gnu.linkonce.e.*)
+    *(.gnu.version_r)
+    *(.eh_frame)
+    . = ALIGN(4);
+    *(.dynamic)
+    *(.gnu.version_d)
+    . = ALIGN(4);       /* this table MUST be 4-byte aligned */
+    _bss_table_start = ABSOLUTE(.);
+    LONG(_bss_start)
+    LONG(_bss_end)
+    _bss_table_end = ABSOLUTE(.);
+  } > irom0_0_seg :irom0_0_phdr
 
   .lit4 : ALIGN(4)
   {

lwip/include/arch/cc.h

@@ -50,6 +50,8 @@
 #include <sys/time.h>
 #include <sys/errno.h>
 
+#define ERRNO
+
 #define BYTE_ORDER LITTLE_ENDIAN
 
 /** @todo fix some warnings: don't use #pragma if compiling with cygwin gcc */

lwip/sys_arch.c

@@ -487,7 +487,7 @@ void sys_init(void)
 
 u32_t sys_now(void)
 {
-    return xTaskGetTickCount();
+    return xTaskGetTickCount() * portTICK_RATE_MS;
 }
 
 /*---------------------------------------------------------------------------*

parameters.mk

@@ -0,0 +1,141 @@
+# Parameters for the esp-open-rtos make process
+#
+# You can edit this file to change parameters, but a better option is
+# to create a local.mk file and add overrides there. The local.mk file
+# can be in the root directory, or the program directory alongside the
+# Makefile, or both.
+#
+-include $(ROOT)local.mk
+-include local.mk
+
+# Flash size in megabits
+# Valid values are same as for esptool.py - 2,4,8,16,32
+FLASH_SIZE ?= 16
+
+# Flash mode, valid values are same as for esptool.py - qio,qout,dio.dout
+FLASH_MODE ?= qio
+
+# Flash speed in MHz, valid values are same as for esptool.py - 80, 40, 26, 20
+FLASH_SPEED ?= 40
+
+# Output directories to store intermediate compiled files
+# relative to the program directory
+BUILD_DIR ?= $(PROGRAM_DIR)build/
+FIRMWARE_DIR ?= $(PROGRAM_DIR)firmware/
+
+# esptool.py from https://github.com/themadinventor/esptool
+ESPTOOL ?= esptool.py
+# serial port settings for esptool.py
+ESPPORT ?= /dev/ttyUSB0
+ESPBAUD ?= 115200
+
+# firmware tool arguments
+ESPTOOL_ARGS=-fs $(FLASH_SIZE)m -fm $(FLASH_MODE) -ff $(FLASH_SPEED)m
+
+
+# set this to 0 if you don't need floating point support in printf/scanf
+# this will save approx 14.5KB flash space and 448 bytes of statically allocated
+# data RAM
+#
+# NB: Setting the value to 0 requires a recent esptool.py (Feb 2016 / commit ebf02c9)
+PRINTF_SCANF_FLOAT_SUPPORT ?= 1
+
+FLAVOR ?= release # or debug
+
+# Compiler names, etc. assume gdb
+CROSS ?= xtensa-lx106-elf-
+
+# Path to the filteroutput.py tool
+FILTEROUTPUT ?= $(ROOT)/utils/filteroutput.py
+
+AR = $(CROSS)ar
+CC = $(CROSS)gcc
+CPP = $(CROSS)cpp
+LD = $(CROSS)gcc
+NM = $(CROSS)nm
+C++ = $(CROSS)g++
+SIZE = $(CROSS)size
+OBJCOPY = $(CROSS)objcopy
+OBJDUMP = $(CROSS)objdump
+
+# Source components to compile and link. Each of these are subdirectories
+# of the root, with a 'component.mk' file.
+COMPONENTS     ?= $(EXTRA_COMPONENTS) FreeRTOS lwip core open_esplibs
+
+# binary esp-iot-rtos SDK libraries to link. These are pre-processed prior to linking.
+SDK_LIBS		?= main net80211 phy pp wpa
+
+# open source libraries linked in
+LIBS ?= hal gcc c
+
+# set to 0 if you want to use the toolchain libc instead of esp-open-rtos newlib
+OWN_LIBC ?= 1
+
+# Note: you will need a recent esp
+ENTRY_SYMBOL ?= call_user_start
+
+# Set this to zero if you don't want individual function & data sections
+# (some code may be slightly slower, linking will be slighty slower,
+# but compiled code size will come down a small amount.)
+SPLIT_SECTIONS ?= 1
+
+# Set this to 1 to have all compiler warnings treated as errors (and stop the
+# build).  This is recommended whenever you are working on code which will be
+# submitted back to the main project, as all submitted code will be expected to
+# compile without warnings to be accepted.
+WARNINGS_AS_ERRORS ?= 0
+
+# Common flags for both C & C++_
+C_CXX_FLAGS ?= -Wall -Wl,-EL -nostdlib $(EXTRA_C_CXX_FLAGS)
+# Flags for C only
+CFLAGS		?= $(C_CXX_FLAGS) -std=gnu99 $(EXTRA_CFLAGS)
+# Flags for C++ only
+CXXFLAGS	?= $(C_CXX_FLAGS) -fno-exceptions -fno-rtti $(EXTRA_CXXFLAGS)
+
+# these aren't all technically preprocesor args, but used by all 3 of C, C++, assembler
+CPPFLAGS	+= -mlongcalls -mtext-section-literals
+
+LDFLAGS		= -nostdlib -Wl,--no-check-sections -L$(BUILD_DIR)sdklib -L$(ROOT)lib -u $(ENTRY_SYMBOL) -Wl,-static -Wl,-Map=$(BUILD_DIR)$(PROGRAM).map $(EXTRA_LDFLAGS)
+
+ifeq ($(WARNINGS_AS_ERRORS),1)
+    C_CXX_FLAGS += -Werror
+endif
+
+ifeq ($(SPLIT_SECTIONS),1)
+  C_CXX_FLAGS += -ffunction-sections -fdata-sections
+  LDFLAGS += -Wl,-gc-sections
+endif
+
+ifeq ($(FLAVOR),debug)
+    C_CXX_FLAGS += -g -O0
+    LDFLAGS += -g -O0
+else ifeq ($(FLAVOR),sdklike)
+    # These are flags intended to produce object code as similar as possible to
+    # the output of the compiler used to build the SDK libs (for comparison of
+    # disassemblies when coding replacement routines).  It is not normally
+    # intended to be used otherwise.
+    CFLAGS += -O2 -Os -fno-inline -fno-ipa-cp -fno-toplevel-reorder
+    LDFLAGS += -O2
+else
+    C_CXX_FLAGS += -g -O2
+    LDFLAGS += -g -O2
+endif
+
+GITSHORTREV=\"$(shell cd $(ROOT); git rev-parse --short -q HEAD 2> /dev/null)\"
+ifeq ($(GITSHORTREV),\"\")
+  GITSHORTREV="\"(nogit)\"" # (same length as a short git hash)
+endif
+CPPFLAGS += -DGITSHORTREV=$(GITSHORTREV)
+
+LINKER_SCRIPTS += $(ROOT)ld/program.ld $(ROOT)ld/rom.ld
+
+# rboot firmware binary paths for flashing
+RBOOT_BIN = $(ROOT)bootloader/firmware/rboot.bin
+RBOOT_PREBUILT_BIN = $(ROOT)bootloader/firmware_prebuilt/rboot.bin
+RBOOT_CONF = $(ROOT)bootloader/firmware_prebuilt/blank_config.bin
+
+# if a custom bootloader hasn't been compiled, use the
+# prebuilt binary from the source tree
+ifeq (,$(wildcard $(RBOOT_BIN)))
+RBOOT_BIN=$(RBOOT_PREBUILT_BIN)
+endif

utils/filteroutput.py

@@ -50,7 +50,7 @@ def main():
         default=74880)
     parser.add_argument(
         '--reset-on-connect', '-r',
-        help='Reset ESP8266 (via DTR) on serial connect',
+        help='Reset ESP8266 (via DTR) on serial connect. (Linux resets even if not set, except when using NodeMCU-style auto-reset circuit.)',
         action='store_true')
 
     args = parser.parse_args()

utils/travis_build/install_toolchain.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+set -euv
+
+# Called by Travis to install a toolchain using esp-open-sdk (parts we
+# ne for esp-open-rtos are the GNU toolchain, libhal, and esptool.py.)
+
+if test -d ${CROSS_BINDIR}; then
+	echo "Using cached toolchain in ${CROSS_BINDIR}"
+	exit 0
+fi
+
+# Travis sets this due to "language: c", but it confuses autotools configure when cross-building
+unset CC
+
+git clone --recursive https://github.com/pfalcon/esp-open-sdk.git
+cd esp-open-sdk
+git reset --hard ${OPENSDK_COMMIT}
+git submodule update --init
+
+# this is a nasty hack as Ubuntu Precise only has autoconf 2.68 not 2.69...
+sed -i "s/2.69/2.68/" lx106-hal/configure.ac
+
+# build the toolchain relative to the CROSS_ROOT directory
+sed -r -i 's%TOOLCHAIN ?=.*%TOOLCHAIN=${CROSS_ROOT}%' Makefile
+
+# will dump log on failure
+echo "Building toolchain without live progress, as progress spinner fills up log..."
+
+if !( make toolchain esptool libhal STANDALONE=n 2>&1 > make.log ); then
+	cat make.log
+	echo "Exiting due to failed toolchain build"
+	exit 3
+fi
+
+echo "Toolchain build completed in ${CROSS_ROOT}."