j3d1/esp-open-rtos
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

- Delaying and repeating i2c operation automatically when i2c interface is busy removed. User has to deal with concurrency using semaphores.

Browse source 
- GPIO_ID_PIN macros removed
- Soft reset mechanism of SHT3x does not work when sensor is in any measurement mode. Therefore, it does not abort initialization procedure anymore
- typos
- changes to use the same source code with ESP8266 (esp-open-rtos) and ESP32 (ESP-IDF)
This commit is contained in:
Gunar Schorcht 2017-12-21 19:02:02 +01:00
parent c3ae04c93f
commit ca0b5da905
7 changed files with 254 additions and 110 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

36
examples/sht3x/README.md
View file

@ -6,29 +6,31 @@ These examples demonstrate the usage of the SHT3x driver with only one and multi
There are examples for only one sensor and examples for two sensors.
To run examples with **one sensor**, just use GPIO5 (SCL) and GPIO4 (SDA) to connect to the SHT3x sensor's I2C interface.
To run examples with **one sensor**, just use GPIO14 (SCL) and GPIO13 (SDA) to connect to the SHT3x sensor's I2C interface.
```
+------------------------+ +--------+
| ESP8266 Bus 0 | | SHT3x |
| GPIO 5 (SCL) >---- > SCL |
| GPIO 4 (SDA) ------- SDA |
| | +--------+
+------------------------+
+-----------------+ +----------+
| ESP8266 / ESP32 | | SHT3x |
| | | |
| GPIO 14 (SCL) ------> SCL |
| GPIO 13 (SDA) <-----> SDA |
+-----------------+ +----------+
```
If you want to run examples with **two sensors**, you could do this with only one bus and different I2C addresses or with two buses and the same or different I2C addresses. In later case, use GPIO14 (SCL) and GPIO12 (SDA) for the second bus to connect to the second SHT3x sensor's I2C interface.
If you want to run examples with **two sensors**, you could do this with only one bus and different I2C addresses or with two buses and the same or different I2C addresses. In later case, use GPIO5 (SCL) and GPIO4 (SDA) for the second bus to connect to the second SHT3x sensor's I2C interface.
```
+------------------------+ +----------+
| ESP8266 Bus 0 | | SHT3x_1 |
| GPIO 5 (SCL) >-----> SCL |
| GPIO 4 (SDA) ------- SDA |
| | +----------+
| Bus 1 | | SHT3x_2 |
| GPIO 14 (SCL) >-----> SCL |
| GPIO 12 (SDA) ------- SDA |
+------------------------+ +----------+
+-----------------+ +----------+
| ESP8266 / ESP32 | | SHT3x_1 |
| | | |
| GPIO 14 (SCL) ------> SCL |
| GPIO 13 (SDA) <-----> SDA |
| | +----------+
| | | SHT3x_2 |
| | | |
| GPIO 5 (SCL) ------> SCL |
| GPIO 4 (SDA) <-----> SDA |
+-----------------+ +----------+
```
## Example description

54
examples/sht3x/sht3x.c
View file

@ -10,29 +10,44 @@
*
* Harware configuration:
*
* +------------------------+ +----------+
* | ESP8266 Bus 0 | | SHT3x |
* | GPIO 5 (SCL) ------> SCL |
* | GPIO 4 (SDA) ------- SDA |
* +------------------------+ +----------+
* +-----------------+ +----------+
* | ESP8266 / ESP32 | | SHT3x |
* | | | |
* | GPIO 14 (SCL) ------> SCL |
* | GPIO 13 (SDA) <-----> SDA |
* +-----------------+ +----------+
*/
/* -- use following constants to define the example mode ----------- */
// #define SINGLE_SHOT_LOW_LEVEL
// #define SINGLE_SHOT_HIGH_LEVEL
#include "espressif/esp_common.h"
#include "esp/uart.h"
/* -- includes ----------------------------------------------------- */
#include "FreeRTOS.h"
#include "task.h"
#include "sht3x.h"
// include SHT3x driver
#include "sht3x/sht3x.h"
/* -- platform dependent definitions ------------------------------- */
// define I2C interfaces at which SHTx3 sensors are connected
#ifdef ESP_PLATFORM // ESP32 (ESP-IDF)
// user task stack depth for ESP32
#define TASK_STACK_DEPTH 2048
#else // ESP8266 (esp-open-rtos)
// user task stack depth for ESP8266
#define TASK_STACK_DEPTH 256
#endif // ESP_PLATFORM
// I2C interface defintions for ESP32 and ESP8266
#define I2C_BUS 0
#define I2C_SCL_PIN GPIO_ID_PIN((5))
#define I2C_SDA_PIN GPIO_ID_PIN((4))
#define I2C_SCL_PIN 14
#define I2C_SDA_PIN 13
#define I2C_FREQ I2C_FREQ_100K
/* -- user tasks --------------------------------------------------- */
static sht3x_sensor_t* sensor; // sensor device data structure
@ -130,23 +145,24 @@ void user_task (void *pvParameters)
}
#endif
/* -- main program ------------------------------------------------- */
void user_init(void)
{
// Set UART Parameter.
uart_set_baud(0, 115200);
// Give the UART some time to settle.
sdk_os_delay_us(500);
// Give the UART some time to settle
vTaskDelay(1);
// Init I2C bus interfaces at which SHT3x sensors are connected
// (different busses are possible).
i2c_init(I2C_BUS, I2C_SCL_PIN, I2C_SDA_PIN, I2C_FREQ_100K);
i2c_init(I2C_BUS, I2C_SCL_PIN, I2C_SDA_PIN, I2C_FREQ);
// Create the sensors, multiple sensors are possible.
if ((sensor = sht3x_init_sensor (I2C_BUS, SHT3x_ADDR_2)))
{
// Create a user task that uses the sensors.
xTaskCreate(user_task, "user_task", 256, NULL, 2, 0);
xTaskCreate(user_task, "user_task", TASK_STACK_DEPTH, NULL, 2, 0);
}
// That's it.

124
extras/sht3x/README.md
View file

@ -1,6 +1,8 @@
# Driver for **SHT3x** digital **temperature and humidity sensor**
This driver is written for usage with the ESP8266 and FreeRTOS using the I2C interface driver. It supports multiple SHT3x sensors connected to the same or different I2C interfaces.
The driver is for the usage with the ESP8266 and [esp-open-rtos](https://github.com/SuperHouse/esp-open-rtos).
It is also working with ESP32 and [ESP-IDF](https://github.com/espressif/esp-idf.git) using a wrapper component for ESP8266 functions, see folder ```components/esp8266_wrapper```, as well as Linux based systems using a wrapper library.
## About the sensor
@ -79,8 +81,8 @@ Before using the SHT3x driver, function ```i2c_init``` needs to be called for ea
#include "sht3x/sht3x.h"
...
#define I2C_BUS 0
#define I2C_SCL_PIN GPIO_ID_PIN((5))
#define I2C_SDA_PIN GPIO_ID_PIN((4))
#define I2C_SCL_PIN 14
#define I2C_SDA_PIN 13
...
i2c_init(I2C_BUS, I2C_SCL_PIN, I2C_SDA_PIN, I2C_FREQ_100K)
@ -232,25 +234,70 @@ if (!sht3x_get_results (sensor, &values))
## Full Example
```
#include "espressif/esp_common.h"
#include "esp/uart.h"
/* -- use following constants to define the example mode ----------- */
#include "FreeRTOS.h"
#include "task.h"
// #define SINGLE_SHOT_LOW_LEVEL
// #define SINGLE_SHOT_HIGH_LEVEL
// include SHT3x driver
#include "sht3x/sht3x.h"
/* -- includes ----------------------------------------------------- */
// define I2C interfaces at which SHTx3 sensors are connected
#include "sht3x.h"
/* -- platform dependent definitions ------------------------------- */
#ifdef ESP_PLATFORM // ESP32 (ESP-IDF)
// user task stack depth for ESP32
#define TASK_STACK_DEPTH 2048
#else // ESP8266 (esp-open-rtos)
// user task stack depth for ESP8266
#define TASK_STACK_DEPTH 256
#endif // ESP_PLATFORM
// I2C interface defintions for ESP32 and ESP8266
#define I2C_BUS 0
#define I2C_SCL_PIN GPIO_ID_PIN((5))
#define I2C_SDA_PIN GPIO_ID_PIN((4))
#define I2C_SCL_PIN 14
#define I2C_SDA_PIN 13
#define I2C_FREQ I2C_FREQ_100K
/* -- user tasks --------------------------------------------------- */
static sht3x_sensor_t* sensor; // sensor device data structure
#if defined(SINGLE_SHOT_HIGH_LEVEL)
/*
* User task that triggers a measurement every 5 seconds. Due to
* power efficiency reasons, it uses the SHT3x *sht3x_single_shot*.
* User task that triggers a measurement every 5 seconds. Due to power
* efficiency reasons it uses *single shot* mode. In this example it uses the
* high level function *sht3x_measure* to perform one measurement in each cycle.
*/
void user_task (void *pvParameters)
{
float temperature;
float humidity;
TickType_t last_wakeup = xTaskGetTickCount();
while (1)
{
// perform one measurement and do something with the results
if (sht3x_measure (sensor, &temperature, &humidity))
printf("%.3f SHT3x Sensor: %.2f °C, %.2f %%\n",
(double)sdk_system_get_time()*1e-3, temperature, humidity);
// wait until 5 seconds are over
vTaskDelayUntil(&last_wakeup, 5000 / portTICK_PERIOD_MS);
}
}
#elif defined(SINGLE_SHOT_LOW_LEVEL)
/*
* User task that triggers a measurement every 5 seconds. Due to power
* efficiency reasons it uses *single shot* mode. In this example it starts the
* measurement, waits for the results and fetches the results using separate
* functions
*/
void user_task (void *pvParameters)
{
@ -281,29 +328,60 @@ void user_task (void *pvParameters)
}
}
#else // PERIODIC MODE
/*
* User task that fetches latest measurement results of sensor every 2
* seconds. It starts the SHT3x in periodic mode with 1 measurements per
* second (*sht3x_periodic_1mps*).
*/
void user_task (void *pvParameters)
{
float temperature;
float humidity;
// Start periodic measurements with 1 measurement per second.
sht3x_start_measurement (sensor, sht3x_periodic_1mps, sht3x_high);
// Wait until first measurement is ready (constant time of at least 30 ms
// or the duration returned from *sht3x_get_measurement_duration*).
vTaskDelay (sht3x_get_measurement_duration(sht3x_high));
TickType_t last_wakeup = xTaskGetTickCount();
while (1)
{
// Get the values and do something with them.
if (sht3x_get_results (sensor, &temperature, &humidity))
printf("%.3f SHT3x Sensor: %.2f °C, %.2f %%\n",
(double)sdk_system_get_time()*1e-3, temperature, humidity);
// Wait until 2 seconds (cycle time) are over.
vTaskDelayUntil(&last_wakeup, 2000 / portTICK_PERIOD_MS);
}
}
#endif
/* -- main program ------------------------------------------------- */
void user_init(void)
{
// Set UART Parameter.
uart_set_baud(0, 115200);
// Give the UART some time to settle.
sdk_os_delay_us(500);
// Give the UART some time to settle
vTaskDelay(1);
// Init I2C bus interfaces at which SHT3x sensors are connected
// (different busses are possible).
i2c_init(I2C_BUS, I2C_SCL_PIN, I2C_SDA_PIN, I2C_FREQ_100K);
i2c_init(I2C_BUS, I2C_SCL_PIN, I2C_SDA_PIN, I2C_FREQ);
// Create the sensors.
// Create the sensors, multiple sensors are possible.
if ((sensor = sht3x_init_sensor (I2C_BUS, SHT3x_ADDR_2)))
{
// Create a user task that uses the sensors.
xTaskCreate(user_task, "user_task", 256, NULL, 2, 0);
xTaskCreate(user_task, "user_task", TASK_STACK_DEPTH, NULL, 2, 0);
}
// That's it.
}
```
## Further Examples
See also the examples in the examples directory [examples directory](../../examples/sht3x/README.md).

1
extras/sht3x/component.mk
View file

@ -2,6 +2,7 @@
# expected anyone using SHT3x driver includes it as 'sht3x/sht3x.h'
INC_DIRS += $(sht3x_ROOT)..
INC_DIRS += $(sht3x_ROOT)
# args for passing into compile rule generation
sht3x_SRC_DIR = $(sht3x_ROOT)

46
extras/sht3x/sht3x.c
View file

@ -2,13 +2,16 @@
* Driver for Sensirion SHT3x digital temperature and humidity sensor
* connected to I2C
*
* Part of esp-open-rtos
* This driver is for the usage with the ESP8266 and FreeRTOS (esp-open-rtos)
* [https://github.com/SuperHouse/esp-open-rtos]. It is also working with ESP32
* and ESP-IDF [https://github.com/espressif/esp-idf.git] as well as Linux
* based systems using a wrapper library for ESP8266 functions.
*
* ----------------------------------------------------------------
*
* The BSD License (3-clause license)
*
* Copyright (c) 2017 Gunar Schorcht (https://github.com/gschorcht
* Copyright (c) 2017 Gunar Schorcht (https://github.com/gschorcht)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@ -38,23 +41,11 @@
* POSSIBILITY OF SUCH DAMAGE.
*/
/**
* Driver for Sensirion SHT3x digital temperature and humity sensor
* connected to I2C
*
* Part of esp-open-rtos
*/
#include <string.h>
#include <stdlib.h>
#include "sht3x.h"
#include "FreeRTOS.h"
#include "task.h"
#include "espressif/esp_common.h"
#include "espressif/sdk_private.h"
#define SHT3x_STATUS_CMD 0xF32D
#define SHT3x_CLEAR_STATUS_CMD 0x3041
#define SHT3x_RESET_CMD 0x30A2
@ -139,12 +130,10 @@ sht3x_sensor_t* sht3x_init_sensor(uint8_t bus, uint8_t addr)
uint16_t status;
// reset the sensor
// try to reset the sensor
if (!sht3x_reset(dev))
{
error_dev ("could not reset the sensor", __FUNCTION__, dev);
free(dev);
return NULL;
debug_dev ("could not reset the sensor", __FUNCTION__, dev);
}
// check again the status after clear status command
@ -325,13 +314,7 @@ static bool sht3x_send_command(sht3x_sensor_t* dev, uint16_t cmd)
debug_dev ("send command MSB=%02x LSB=%02x", __FUNCTION__, dev, data[0], data[1]);
int err;
int count = 10;
// in case i2c is busy, try to write up to ten ticks (normally 100 ms)
// tested with a task that is disturbing by using i2c bus almost all the time
while ((err=i2c_slave_write(dev->bus, dev->addr, 0, data, 2)) == -EBUSY && count--)
vTaskDelay (1);
int err = i2c_slave_write(dev->bus, dev->addr, 0, data, 2);
if (err)
{
@ -343,17 +326,10 @@ static bool sht3x_send_command(sht3x_sensor_t* dev, uint16_t cmd)
return true;
}
static bool sht3x_read_data(sht3x_sensor_t* dev, uint8_t *data, uint32_t len)
{
if (!dev) return false;
int err;
int count = 10;
// in case i2c is busy, try to read up to ten ticks (normally 100 ms)
while ((err=i2c_slave_read(dev->bus, dev->addr, 0, data, len)) == -EBUSY && count--)
vTaskDelay (1);
int err = i2c_slave_read(dev->bus, dev->addr, 0, data, len);
if (err)
{
@ -368,7 +344,7 @@ static bool sht3x_read_data(sht3x_sensor_t* dev, uint8_t *data, uint32_t len)
for (int i=0; i < len; i++)
printf("%02x ", data[i]);
printf("\n");
# endif
# endif // ifdef SHT3x_DEBUG_LEVEL_2
return true;
}

25
extras/sht3x/sht3x.h
View file

@ -2,13 +2,16 @@
* Driver for Sensirion SHT3x digital temperature and humidity sensor
* connected to I2C
*
* Part of esp-open-rtos
* This driver is for the usage with the ESP8266 and FreeRTOS (esp-open-rtos)
* [https://github.com/SuperHouse/esp-open-rtos]. It is also working with ESP32
* and ESP-IDF [https://github.com/espressif/esp-idf.git] as well as Linux
* based systems using a wrapper library for ESP8266 functions.
*
* ----------------------------------------------------------------
*
* The BSD License (3-clause license)
*
* Copyright (c) 2017 Gunar Schorcht (https://github.com/gschorcht
* Copyright (c) 2017 Gunar Schorcht (https://github.com/gschorcht)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@ -38,20 +41,18 @@
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef DRIVER_SHT3x_H_
#define DRIVER_SHT3x_H_
#include "stdint.h"
#include "stdbool.h"
#include "FreeRTOS.h"
#include "i2c/i2c.h"
#ifndef __SHT3x_H__
#define __SHT3x_H__
// Uncomment to enable debug output
// #define SHT3x_DEBUG_LEVEL_1 // only error messages
// #define SHT3x_DEBUG_LEVEL_2 // error and debug messages
#include "stdint.h"
#include "stdbool.h"
#include "sht3x_platform.h"
#ifdef __cplusplus
extern "C" {
#endif
@ -276,4 +277,4 @@ bool sht3x_get_results (sht3x_sensor_t* dev,
}
#endif
#endif /* DRIVER_SHT3x_H_ */
#endif /* __SHT3x_H__ */

70
extras/sht3x/sht3x_platform.h Normal file
View file

@ -0,0 +1,70 @@
/*
* Driver for Sensirion SHT3x digital temperature and humidity sensor
* connected to I2C
*
* This driver is for the usage with the ESP8266 and FreeRTOS (esp-open-rtos)
* [https://github.com/SuperHouse/esp-open-rtos]. It is also working with ESP32
* and ESP-IDF [https://github.com/espressif/esp-idf.git] as well as Linux
* based systems using a wrapper library for ESP8266 functions.
*
* ----------------------------------------------------------------
*
* The BSD License (3-clause license)
*
* Copyright (c) 2017 Gunar Schorcht (https://github.com/gschorcht)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/**
* Platform file: platform specific definitions, includes and functions
*/
#ifndef __SHT3x_PLATFORM_H__
#define __SHT3x_PLATFORM_H__
#if !defined(ESP_OPEN_RTOS)
#define ESP_OPEN_RTOS 1
#endif
#ifdef ESP_OPEN_RTOS // ESP8266
// platform specific includes
#include "FreeRTOS.h"
#include "task.h"
#include "espressif/esp_common.h"
#include "espressif/sdk_private.h"
#include "esp/uart.h"
#include "i2c/i2c.h"
#endif // ESP_OPEN_RTOS
#endif // __SHT3x_PLATFORM_H__