j3d1/esp-open-rtos
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

Fix support for Si7021 and clarify timing comments

Browse source 
Fixed conversion of the Si7021 data and fully tested over large temperature / humidity range.
Also tested the AM2301 sensor (often used as alternative to Si7021)
This commit is contained in:
David Dix 2019-11-29 23:47:30 +00:00 committed by GitHub
parent 6d755943e0
commit 1ce1fa0e37
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 12 additions and 8 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

20
extras/dht/dht.c
View file

@ -35,11 +35,18 @@
*
* Initializing communications with the DHT requires four 'phases' as follows:
*
* Phase A - MCU pulls signal low for at least 18000 us
* Phase B - MCU allows signal to float back up and waits 20-40us for DHT to pull it low
* Phase A - MCU pulls signal low for a period (see below)
* Phase B - MCU allows signal to float back up and waits 20-200us for DHT to pull it low
* Phase C - DHT pulls signal low for ~80us
* Phase D - DHT lets signal float back up for ~80us
*
* The length of Phase A is dependent on the sensor type:
* DHT_TYPE_DHT11 : at least 18000 us
* DHT_TYPE_DHT22 : 800 us to 20000 us, typically 1100 us
* DHT_TYPE_SI7021 : 300 us to 500 us
* For a DHT21 use DHT_TYPE_DHT22
* For an AM2301/AM2302 use DHT_TYPE_SI7021
*
* After this, the DHT transmits its first bit by holding the signal low for 50us
* and then letting it float back high for a period of time that depends on the data bit.
* duration_data_high is shorter than 50us for a logic '0' and longer than 50us for logic '1'.
@ -91,8 +98,8 @@ static inline bool dht_fetch_data(dht_sensor_type_t sensor_type, uint8_t pin, bo
sdk_os_delay_us(sensor_type == DHT_TYPE_SI7021 ? 500 : 20000);
gpio_write(pin, 1);
// Step through Phase 'B', 40us
if (!dht_await_pin_state(pin, 40, false, NULL)) {
// Step through Phase 'B', 200us
if (!dht_await_pin_state(pin, 200, false, NULL)) {
debug("Initialization error, problem in phase 'B'\n");
return false;
}
@ -131,7 +138,7 @@ static inline int16_t dht_convert_data(dht_sensor_type_t sensor_type, uint8_t ms
{
int16_t data;
if (sensor_type == DHT_TYPE_DHT22) {
if (sensor_type == DHT_TYPE_DHT22 || sensor_type == DHT_TYPE_SI7021) {
data = msb & 0x7F;
data <<= 8;
data |= lsb;
@ -139,9 +146,6 @@ static inline int16_t dht_convert_data(dht_sensor_type_t sensor_type, uint8_t ms
data = 0 - data; // convert it to negative
}
}
else if (sensor_type == DHT_TYPE_SI7021) {
data = msb * 256 + (lsb & ~0x3);
}
else {
data = msb * 10;
}